System: Material: Fitment: Series H1 Steel Fullsize Cargo Vans Sprinter Lowtop 02-06 Color: [ ] Black [ ] White Instruction #: ICB.3 FOR WAREHOUSE USE VEHICLE YEAR FRONT CENTER REAR CHEVY VAN UP TILL 1996 H04 63 H04 63 H04 63 H04 63 CHEVY EXPRESS 1996-ON H04 57 H03 57 H03 57 H04 56 DODGE RAM VAN ALL YEARS H04 63 H04 63 H04 63 H04 62 FORD ECONOLINE UP TILL 1991 H04 63 H04 63 H04 63 H04 63 FORD ECONOLINE 1992-ON H04 63 H03 63 H03 63 H04 62 GMC VAN UP TILL 1996 H04 63 H04 63 H04 63 H04 63 GMC SAVANA 1996-ON H04 57 H03 57 H03 57 H04 56 SPRINTER LOW TOP 2002-06 H04 65 H04 65 H04 65 H04 65 *Single Bar Upgrades are center bars unless otherwise specified. *Rear cross bars for Extended Vans are an additional inch shorter than the rear cross bar listed above. 1 BAR 2 BAR 3 BAR 4 BAR 1 D001 1 D002 1 D003 2 D002 2 H03/H04 1 D055 4 D055 5 D055 1 BG000 (shorten by 8 1 A500(refer to chart) 4 H03/H04 1 A02 1 A06 6 H03/H04 2 A02 2 A06 8 H03/H04 2 A02 3 A06 1 A69 2 A69 3 A69 2 BG000 (shorten by 8 3 BG000 (shorten by 8 4 BG000 (shorten by 8 2 A500(refer to chart) 3 A500(refer to chart) 4 A500(refer to chart) 1 Packaged by Date
1/2 Wrench Required Tools Power Tool with Phillips head PART# DESCRIPTION 1 BAR 2 BAR 3 BAR 4 Bar s (not drawn to scale) HARDWARE D001/D002/D003 Zc-B016 5/16 X 1 1/4 CARRIAGE BOLT 4 8 12 16 SS-B201 1/2 PHILLIP TAP SCREWS` 4 8 12 16 Zc-W008 5/16 X 3/4 WASHER 4 8 12 16 Zc-N005 5/16 NYLON NUTS 4 8 12 16 HARDWARE D055 Zc-B018 5/16 X 1 3/4 Carriage bolt 0 2 4 5 N016 plastic knob 0 2 4 5 A02 Ladder Guide 0 1 2 2 A06 Ladder Stopper 0 1 2 3 a69 EZ velcro strap 0 1 2 3 BG0[ ] plastic bar guard 48,49,54,55 1 2 3 4 H11 DRIP RAIL CLAMP 2 X 8 2 4 6 8 H03/H04 Upright Mounting base (Refer to chart on pg 1) 2 4 6 8 A500-[ ] Cross Bar (Refer to chart on pg 1) 1 2 3 4 BG708 Rubber Seat 2 4 6 8 2
[ ] Ford Econoline 1992 & On [ ] Dodge Ram Van (All Years) 9 8 3/8 8 3/8 9 9 9 9 9 62 63 63 63 62 63 63 63 [ ] Chevy Van (till 96) [ ] GMC Savana 1996 & On [ ] GMC Van (till 96) [ ] GMC Express 1996 & On [ ] Ford Econoline (till 1991) 9 9 9 9 9 8 3/8 8 3/8 9 63 63 63 63 56 57 57 57 3
[ ] Sprinter Low Top (2002-06) [ ] Sprinter High Top (2002-06) 9 9 9 9 16 16 16 16 65 65 65 65 65 65 65 65 EZ Velcro Strap (Not Included) How it works (Rear cross-bar) (Ladder) Insert rear cross-bar into opening of EZ-velcro straps. Slide strap around equipment the through steel ring. Pull EZ-velcro to secure via velcro. Plastic Bar Guards Rubber Seats for Upright Mounts - Remove wax paper from Plastic Bar Guard and adhere it to the top of the Cross Bar. - Slide the Rubber Seats onto th bottom of the Upright Mounts. - These prevent metal on metal contact for vehicles without a protective layer on their drip rail. 4
-Height of upright and length of crossbars are vehicle specific. Please refer to page 3 for correct measurements. -Front bar should be positioned 6 behind front doors to prevent wind noise/rattle. -Refer to chart on page 3 for correct upright and bar positioning. Chevy Express 96-Present GMC Savana 96-Present Secure the mounting plate to the top holes of the upright mounts. Chevy Van GMC Up & Till 96 Dodge All Years Dodge Sprinter 2002-2006 Ford All Years Secure the mounting plate to the bottom holes of the upright mounts. -For Ford Econoline 92-present turn the mounting plate so the hole are slightly higher. -Except for the Passenger side barn door. Flip the mounting plate 180 so doors can open freely. 180 5
N005 Push the upright so it s 90 degrees then secure with tap screws. W008 90 B201 B016 -Tightly secure hardware. -Upright mounting base will crimp the drip rail and angle outwards as hardware is tightened. Ladder Stopper A06 (FRONT BAR) B018 N016 - Ladder Stopper can be installed in the front bar with tip facing the rear, allowing the ladder steps to fit in between. The bend of the Ladder Stopper prevent the ladder from rattling. Ladder Guide A02 B018 - Ladder Guide can be installed in the rear bar to guide ladders down the system. (REAR BAR) N016 Ladder Stopper Velcro Strap 6
Accessories H1 STEEL & ALUMINUM Scan for direct link to accessories A02 A06 Plastic Bar Guards for Steel Cross Bar Part # Description Length MSRP Part # Description Size Bar Type MSRP A02 Ladder Guide 5.5 1 X 2 19.00 A06 Ladder Stopper 5 1 X 2 20.00 Ladder Stopper and Guides prevent items from sliding forward and allows easy bungee and tie-down. Galvanized and dipped in rubber for durability. Easy turn knob allows quick adjustment and removal. Part # Description Height Bar Type Color MSRP A63 Push to Secure 6-8 1 X 2 Black or white 69.00 Secure your ladder with the Vantech push 2 secure system. Clamps onto cross bar with 2 X 1 with C clamps. Holds ladders 6-8 in height. BG042 Plastic Bar Guards 42 6.00 BG056 Plastic Bar Guards 56 7.00 BG063 Plastic Bar Guards 63 8.00 BG072 Plastic Bar Guards 72 10.00 BG084 Plastic Bar Guards 84 11.00 BG096 Plastic Bar Guards 96 12.00 For Steel Systems Prevents scratch and damage to crossbars Vantech 6 conduit carrier. Spring assist rear door for a water tight seal. Padlock tab for rear hatch door. A35 requires drilling into cross bars. A34 is a direct bolt-on if you have aluminum cross bars with built-in channels on top. Rubber Bar Guards for Aluminum Cross Bar Part # Description Length MSRP BG548 Rubber Bar Guards 48" 14.00 BG565 Rubber Bar Guards 65" 19.00 Part # Description Length Capacity MSRP A69 EZ Velcro Strap 10 75 lbs 18.00 Strap a ladder with the EZ velcro straps. Holds up to a maximum of 75 lbs in combination with the ladder stopper or guide. Loops into cross bar up to 2 X 1. Part # Description Width Bar Type Color MSRP A35 A34 6 Conduit Carrier (drilling required) 6 Conduit Carrier (Slider bolt-on) 6 Universal Silver 109.00 6 Aluminum Channels Silver 109.00 Includes: Front cap, rear door, 2 U brackets and hardware. 6 PVC pipe not included. BG572 Rubber Bar Guards 72" 22.00 BG584 Rubber Bar Guards 84" 36.00 BG596 Rubber Bar Guards 96" 40.00 For aluminum systems with channels Prevents scratch and damage to crossbars Reduces windnoise if present Part # Description Length Color MSRP A81 Adjustable Extension Arm with 8 Convex Mirror 25-32 Black or White 89.00 Made from aluminum material. Bolts onto the eyehooks on the H series mounting base. No drilling is required. Extension arm can adjust in length and angle. Convex mirror is 8 wide stainless steel. Part # Description Width Bar Type Material Color MSRP A38 Wind Foil 24" 1 X 2 Aluminum Black / White 45.00 A39 Wind Foil 36" 1 X 2 Aluminum Black / White 49.00 A53 Wind Foil 48" 1 X 2 Aluminum Black / White 55.00 A54 Wind Foil 60" 1 X 2 Aluminum Black / White 59.00 A55 Wind Foil 63" 1 X 2 Aluminum Black / White 62.00 Reduces wind noise and vibration & still allows optional accessories for cross bar. 7 Part # Description Length Capacity MSRP Attach the Vantech Ratchet tie-down to the eyehooks on the mounting uprights with 1/2 bolts. A62 VR 500 Ratchet Tie-Down Installed onto eyehooks Sold as individuals 10 150 lbs 39.00