Type: PA3112F Actuator fitted via EasyFit-F mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets, no special tools needed to change Low friction sliding parts Factory lubricated for life (high temperature grease available) ATEX approved for use in Zone 1 EExd applications Local visual position indicator ISO5211, VDI-VDE3845 & Namur compliant Applications: ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic pipework system used by many industries in systems for food and beverage production, sewerage and water treatment etc. ABS is extremely resistant to impact with good resistance to chemicals, and is non-toxic. ABS has good chemical resistance with high impact strength, and has good resistance to most diluted inorganic acids, salts, animal fats and oils, and organic acids. It is not resistant to organic solvents, alcohol, petrol, acetic acid or vegetable oils. Ball valve information: The FIP VKD is a true union ball valve particularly suited to industrial applications where high performance and reliability in service are primary considerations. The patented Seat Stop system assures longevity of the seals particularly in cases where thermal expansion is expected. It is possible to micro-adjust the seats. The new patented Dual Block system allows proper union nut tightening without any risk of unscrewing. Automation is made quick and easy when using the J+J designed and manufactured EasyFit-F mounting kit. Specifications: Actuator housing Hazardous area rating Actuator temp limits Assembly temp limits Valve body Valve ball Valve seats Valve pressure rating Valve temp limits Hard anodised aluminium ATEX II 2GD EExd -20 to +80 C PA3112F +70 C ABS ABS Size range 1/2 to 4 Actuator body coating options: PTFE with EPDM seals Option PTFE with FKM (Viton) seals 16 bar at ambient temp (+20C) -40 to +70 C Note: Working pressure reduces dramatically as temperature rises. How this air operated 1/4 turn valve works (on-off): Within the cylindrical bore of the actuator are 2 opposing aluminium pistons, each with an integrally cast rack, which is driven by a bearing supported nickel plated steel pinion. The housing has air ports drilled to allow compressed air supplied via the air connection ports to flow either in to the cavity between the pistons to drive them apart, which compresses springs contained between the top of the piston and the end caps, and, via the rack & pinion system, rotates the actuator s output drive shaft. Releasing the compressed air releases the stored spring energy which reverses the direction of rotation of the output shaft as they decompress. Final open and closed positions are set with adjustable mechanical stops. Standard: Hard anodized extruded aluminium body, with epoxy coated aluminium end caps. ENP: Electroless nickel plated body and end caps Teflon : PTFE coated aluminium body & end caps Doc: PA3112F.Rev0 Oct 2016
Actuator Information - air ports and standard direction of rotation (closes clockwise) Exhaust Air supply Exhaust Air supply Exhaust Air supply Exhaust Optional Actuator Information - standards for mounting valves and accessories Mounting of position control & monitoring devices Eg: Limit switchbox or positioner Underside of actuator
Method of assembly and accessories for position feedback, position monitoring and position control Safe area switchbox fitted Safety Notice: Ensure positioner, switchbox and/ or solenoid are compatible with the intended installation area - is it a safe area, or a hazardous area? If hazardous, which Zone? We can supply either. Call to check if unsure. Positioner: Sets the degree of opening of the actuator (and therefore valve) proportional to a control input signal. This signal can be either 4-20mA, or 0-15psi. Switchbox: Internal switches, activated by cams or similar, driven by the actuator s pinion, make a circuit at end of travel (ie: full open, or full closed) to provide remote end of travel confirmation. Also has local visual position indicator Solenoid: Provides electrical control of the pneumatic actuator. Air remains energised permanently, the solenoid valve switches to control the opening and closing of the actuator. Safe area Namur solenoid fitted. Safe area pilot solenoid and switchbox fitted. The solenoid can be pre-wired to the switch-box.
Valve Data 1/2 to 2 21/2 to 4
Typical Assembly Dimensions (mm) EasyFit-F mounting kit for 1/2 to 2 No EasyFit-F kit for valves 21/2 to 4 Size d (imperial) Size d (metric OD) CH-air A Model No A B C D H F 1/2 D20 DN15 DA 42 DA 160 DA 57 27 34 DA 118 103 3/4 D25 DN20 DA 42 DA 160 SR 40SR SR 138 DA 57 SR 67 33 34 DA 124 SR 134 115 1 D32 DN25 DA 42 DA 160 SR 63SR SR 156 DA 57 SR 83 36 34 DA 127 SR 153 128 11/4 D40 DN32 DA 42 DA 160 SR 63SR SR 156 DA 57 SR 83 43 39 DA 139 SR 165 146 11/2 D50 DN40 DA 42 DA 138 SR 63SR SR 156 DA 67 SR 83 49 39 DA 155 SR 171 164 2 D63 DN50 DA 42 DA 156 SR 75SR SR 210 DA 83 SR 100 61 34 DA 178 SR 195 199 21/2 D75 DN65 DA 75 DA 210 SR 85SR SR 228 DA 100 SR 110 82 0 DA 182 SR 193 235 3 D90 DN80 DA 85 DA 228 SR 100SR SR 282 DA 110 SR 125 88 0 DA 198 SR 213 270 4 D110 D100 DA 85 DA 228 SR 115SR SR 310 DA 110 SR 142 97 0 DA 207 SR 239 308
: Valves 1/2 to 2 Uncontrolled Uncontrolled copy, copy, not not subject subject to automatic automatic updates. updates.
: Valves 21/2 to 4
Exploded view & parts list: Valves 1/2 to 2 Valve material = ABS
Exploded view & parts list: Valves 21/2 to 4 Valve material = ABS