www.worldoftest.com/gaugegrips.htm Qualitest grips and attachments are integral components of testing systems, designed for a wide range of tension, compression, and torque applications. These grips and attachments are able to mount to Qualitest force gauges, torque gauges, sensors, and test stands Wire Terminal Grips These grips are designed for securing wire terminals, cables, connectors, and other samples for pull testing. Two wire diameter capacities are available, 0.125" and 0.25". Use these grips with the G1002 dual roller grip, and choice of test stands and force gauges to create complete terminal and crimp testing systems. G1001 G1001-1 Wire terminal grip Size: 3.43"L x 1"D Weight: 0.29 lb Sample size: 0.125" max. dia. 0 - AWG 8 (approximate) Wire terminal grip Size: 3.43"L x 1"D Weight: 0.29 lb Sample size: 0.125" - 0.25" dia. AWG 8 - AWG 2 (approximate) Dual Roller Grip This cam grip secures the ends of wire, cable, and tubing samples for pull testing. Engaging and disengaging samples is quick and easy, with a side slot for sample insertion and serrated steel rollers. Use this grip with a G1001 wire terminal grip, and choice of test stands and force gauges to create complete terminal and crimp testing systems.
G1002 Dual roller grip Size: 1.25"L x 1.00"W x 1.25"H Weight: 0.19 lb Sample size: 0.25" x 0.50" max. Miniature Component Grip This slender grip is ideal for testing small and hard-to-reach parts, such as electronic mechanical components. Use this grip with test stands and force gauges to create complete testing systems. G1003 Miniature component grip Capacity: 30 lb Size: 0.5"L x 0.5"W x 1.7"H Weight: 0.06 lb Sample size: 0.07" max. Film and Paper Grips These peel testing grips are designed for gripping film, paper, labels, packaging, and other thin materials. Adjustable serrated interlocking jaws effectively grip the samples for up to 100 lb of force. The grips are available in four sizes: 1", 3", 5", and 7". Use them with a force gauge and a test stand to create a complete peel testing system. G1008 Size: 1.18"W x 1.25"D x 2.6"L Weight: 0.31 lb Sample size: 1" wide
G1015-1 G1015-2 G1015-3 Size: 1.85"D x 3"H x 3"W Weight: 0.57 lb Sample size: 3" wide Size: 1.85"D x 3"H x 5"W Weight: 0.67 lb Sample size: 5" wide Size: 1.85"D x 3"H x 7"W Weight: 0.77 lb Sample size: 7" wide Compression Plates These aluminum compression plates are ideal for testing springs, foams, and other materials. The plates attach directly to force gauges and test stands. G1009 G1009-1 Compression plate, 2" dia. Size: 2"D x 0.5"H Weight: 0.08 lb Compression plate, 3" dia. Capacity: 500 lb Size: 3"D x 0.75"H Weight: 0.27 lb Thread: 5/16-18 UNC Pin vise, (Jacobs chuck), 0.062"-0.375" dia. This grip is suitable for holding round samples such as wire or tubing up to 0.375" dia. It can mount to any force gauge or test stand. Includes key.
G1010 Pin vise Capacity: 30 lb Size: 1.38"D x 2.33"H Weight: 0.35 lb Sample size: 0.062"-0.375" dia. Rubber Tip This attachment is designed to simulate a finger for testing pushbuttons, membrane switches, etc. Use this grip with a force gauge and test stand to create a complete compression testing system. G1011 Rubber tip Capacity: 50 lb Size: 0.97"L x 0.5"D Weight: 0.01 lb Wedge Grip This heavy duty self-tightening grip with a capacity of 1200 lb (5.3 kn) is ideal for a range of tensile testing requirements. The serrated steel jaws are easily opened with an ergonomic spring loaded knob and rack and pinion type mechanism. The jaws ride on rollers instead of sliding along the surface of the housing, as with conventional wedge grips. This unique design prevents jamming and improves gripping characteristics. Use this grip with a test stand and force gauge to create a complete testing system. G1061 Wire terminal grip 1200 lb [5.3 kn] capacity Unique jam-free design Fully enclosed Hardened, serrated steel jaws Thru slot for samples of unlimited width Ergonomic handle Weight: 0.80 lb [0.36 kg] Jaw material / hardness: 416 SS / 43 RC
Parallel Jaw Grip This grip is ideal for general pull testing applications. Manually tightened serrated jaws may be individually adjusted for samples up to 0.25" thick. Use this grip with a force gauge and test stand to create a complete testing system. G1013 Parallel jaw grip Size: 1.25"L x 1.75"W x 2.25"H Weight: 0.65 lb Sample size: 0.25 Jacobs Chucks for STH Torque Sensors These chucks mount directly to Series STH torque sensors for various torque measurement applications. Select a size appropriate for your sample. G1016-1 G1016-2 G1016-3 Jacobs chuck for STH, 0.028"-0.250" dia. Jacobs chuck for STH, 0.062"-0.375" dia. Jacobs chuck for STH, 0.078"-0.500" dia. Bit Holder for STH Torque Sensors Holds 1/4" hex tool bits for torque measurement applications. For use with Series STH torque sensors. G1017 Bit holder for STH Bit holder for STH in Size: 2.38"L x 1.4"D Weight: 0.11 lb Thread: N/A Sample size: 1/4" hex tool bits
Swivel Adapters Use these adapters between any grip and force gauge to provide a swiveling action for proper sample alignment. G1018-1 G1018-2 Swivel adapter Size: 1.9"L x 0.8"D Weight: 0.12 lb Swivel adapter Capacity: 500 lb Size: 1.9"L x 0.8"D Weight: 0.27 lb Thread: 5/16-18 UNC Ergonomic Padded Attachments These ergonomic padded attachments are designed for testing muscle strength and other job task requirements. They attach directly to force gauges. G1019 Padded attachment, square Size: 1"W x 1"D x 1"H Weight: 0.31 lb Thread: 5/16-18 UNC & #10-32 UNF G1020 Padded attachment, rectangular Size: 4"W x 1"D x 1"H Weight: 0.15 lb Thread: 5/16-18 UNC & #10-32 UNF G1021 Padded attachment, curved Size: 4"W x 1"D x 1.4"H Weight: 0.2 lb Thread: 5/16-18 UNC & #10-32 UNF