Products Our product lines consist of several families of solenoid and pneumatic pinch valves, electronic controller boards, valve manifolds, and other accessories. Engineering Design Services Need help with certain design aspects of a project or a complete system? Then let our team of experienced engineers be a resource for you. We offer electrical, mechanical and software engineering support to cover project conceptualization, specification scoping, proof-of-concept modeling, prototyping, validation and verification. Our Engineering Software Competencies AutoCAD SolidWorks Autodesk Inventor LabView 35 years of successful engineering design experience specializing in fluid control Internal prototype modeling capabilities Utilization of current engineering design software Contract Manufacturing Are you in need of outsourcing the manufacturing of your subassemblies or complete systems? We offer small to full scale quality-controlled production capabilities. Our ISO 9001 certified quality manufacturing, Lean, Six Sigma and Class 100,000 clean room facilities can provide you with an efficient extension of your production needs. We work closely with your quality and purchasing departments to support your documentation, audits, lot traceability, forecasting, planning, procurement and inventory management.
Intelivalve Solenoid Pinch Valves The Intelivalve solenoid pinch valve product line delivers leading edge performance, reliability and value. Using a proprietary pinch valve design, these units employ patent-pending optics, software, and electromechanics to provide the greatest benefits including linear force output, low power consumption, state sensing, tube detection, self-monitoring diagnostics and safety. Designed for flexibility, each model allows the customer to choose their own tubing or cassette interface materials. Simply select your tubing or interfaces within published guidelines, connect and let the Intelivalve do the work it s that simple! Each unit is supplied with a controller that uses adaptive pulse width modulation for low power consumption/management as well as state sensing, and tube detection. In addition, the Intelivalve solenoid pinch valves are the quietest pinch valves on the market. To meet the needs of today s medical devices, the Intelivalve product line is the ideal solution that is specifically designed to maintain sterile fluid paths in medical or bioprocessing applications where sterility is vitally important. Easy snap in tube loading/unloading Electrically-isolated, vibration dampening panel mount Features/Benefits Compact design with user selectable tubing (up to 75 Shore A) Panel mount ready with snap in tubing slot or cassette interface Low power operation averaging 1-3 watts per hold cycle Quiet electronic noise dampening operation for patient treatment environments Compact footprint with quick connector Unassisted valve open state that supports easy loading Electrically isolated, vibration damping panel mounting seal Internal splash seals for wash down procedures Valve state and tube detection sensing Self-monitoring cycle usage and failure data logging Offered in 3 material formats: Anodized Aluminum, 316L SS and Delrin RoHS, FCC Part 15B and CE certified Warranted for 2 years or 2 million cycles MTBF Built in optical sensor that enables pulse and hold, state sensing, electronic noise dampening and cycle monitoring/diagnostic feedback *Intelivalve pinch valves are sold with a proprietary Acrosense FCP-A controller and standard 1 meter cable set.
Cutting Edge Valve Technology Intelivalve Model: 2100 2200 2300 2400 Physical Dimensions (W x L) 2.2 x 3.5 inches 56 x 89 mm 2.2 x 5.0 inches 56 x 127 mm 2.2 x 5.0 inches 56 x 127 mm 2.5 x 6.6 inches 64 x 168 mm Approximate Weight 265 grams 420 grams 420 grams 875 grams Supported Tubing OD 0.063-0.125 inches 1.6 3.2 mm 0.125 0.187 inches 3.2 4.7 mm 0.187-0.250 inches 4.7 6.4 mm 0.250-0.437 inches 6.4 11.1 mm Maximum Support Tubing Durometer Up to 75 Shore A Maximum Supported Inline Pressure 30 psi or 2 Bar Default Valve State Normally - Closed Available Head Materials Anodized Aluminum, 316L Stainless Steel or Delrin Minimum Operational Input 12V DC 12V DC 12V DC 24V DC Voltage Maximum Operating Voltage 42V DC 42V DC 42V DC 42V DC Standby Current at Minimum Voltage 75mA Peak Pull-In Current Per Valve at Recommended Voltage 2.5A 3.5A 3.5A 3.7A Steady State Hold-In Current Per Valve at Minimum Voltage 200mA 200mA 200mA 250mA Minimum Trigger Signal Voltage 2V DC Maximum Trigger Signal Voltage 42V DC
Traditional Solenoid Pinch Valves In addition to our Intelivalve products, we also offer a product line of simple and affordable solenoid pinch valves. For applications where state sensing, tube detection or noise control are not needed, chose from either snap in tubing or cassette mount valve head formats that operate with simplicity and reliability. All units are panel mount ready and come with splash seals for protection from direct liquid exposure. An optional 900R solenoid driver/controller can be purchased that uses pulse and hold methods for power efficiency and to minimize heat generation. Features/Benefits Compact design with user selectable tubing (up to 60 Shore A) or cassette interface Easy installation - panel mount ready with snap in tubing slot Internal splash seals for wash down procedures Optional manual override on certain models Unassisted valve open state that supports easy loading Warranted for 1 year or 1 million cycles MTBF Panel mount ready flange Internal and external splash seals for valve protection Easy access snap in tubing area with manual override for quick loading and unloading
Simple and Affordable Model #: 904 955 958 960 Recommended Power Supply Operating Input Pulse Power Operating Input Hold Power Operating Input Trigger Voltage 24V DC x 3A (for use with 900R controller add secondary 2-10V DC or 24V DC signal trigger) Between 7 70 Watts dependent on tubing and pressure Between 4 7 Watts dependent on tubing and pressure 2 10V DC Snap In Tube Loading Slot No cassette Yes snap in tube slot Yes snap in tube slot No cassette Supported Tubing OD Maximum Media Pressure Maximum Tubing Durometer Mounting Orientation 0.125-0.250 inches 3.2-6.4 mm 0.125-0.187 inches 3.2-4.7 mm 15 psi or 1 Bar 0.250-0.375 inches 6.4-9.5 mm Up to 60 Durometer - Shore A Panel 0.250-0.375 inches 6.4-9.5 mm Plunger Face Geometry Flat Flat Flat V-Shaped Ridge Manual Tubing Override No Yes Yes No Protective Seals Panel Internal Splash and Panel Panel Default Valve State Normally Closed
Pneumatic Pinch Valves When working with harder or larger diameter tubing that requires stronger pinch forces, our pneumatic product line offers a great match. Designed for GMP biopharmaceutical processing and industrial applications where sterility and wash down procedures are needed, these compact robust units offer highly reliable performance. Designed for disposable tubing, each model contains a snap-in tube loading slot and is panel or base mount ready. Units can also be configured with optional state sensors, controllers, or setup in normally-open or normally-closed default states. Optional safety caps on larger models are also available to ensure finger crushing safety. Features/Benefits Compact design with user selectable tubing (up to 75 Shore A) Base or Panel mount ready with snap in tubing slot Optional valve state detection sensors Optional 3 or 4-way controllers for pressure venting between states Panel splash seals for wash down procedures Manual overrides on certain models Offered in Black Anodized Aluminum or 316L SS Warranted for 2 years Quick access snap-in tubing design for loading and unloading Base mounting option Rounded plunger head that supports larger tubing and stronger pinch forces
Strong and Robust Model #: 932 933 934 935 Input Operating Pressure Range 30-125 psig 45-125 psig 65-125 psig 65-125 psig Build-In Tube Loading Slot Supported Tube OD Max. Tube Durometer Mounting Orientation 0.125-0.250 inches 3.2-6.4 mm 0.250-0.375 inches 6.4-9.5 mm Yes Up to 80 Shore A Panel or Base 0.500-0.750 inches 12.7-19.2 mm 0.75-1.00 inches 19.1-35.4 mm Plunger Face Geometry U-Shape Ridge Flat U-Shape Ridge U-Shape Ridge Manual Tubing Override Yes Yes No No Default Valve Position Protective Seals Available as normally opened or closed Optional Safety Covers No No Yes Yes Controller Voltage Options Offered Materials Panel 24V DC, 110V AC, 220V AC CE Marked Black Anodized Aluminum or 316 Stainless Steel
Acrosense Fluid Control Platform The Acrosense FCP product line consists of a variety of electronic control boards, each designed to control and network common fluidic components that are commonly in medical device and bioprocessing systems. Components such as motors, pumps, electric valves or actuators, sensors and power supplies controlled and networked together to build an integrated fluidic control system. Each board configuration supports stand alone or networked operation making it a flexible and scalable platform. So if you re faced with designing and building a fluid system, take a look at the Acrosense FCP offerings to see how it can offer a quick and efficient platform for bringing your concepts to reality. Acrosense Solenoid Valve Controller Used for controlling solenoid pinch valve or actuators. Capable of operating 2 or 3 units per board (dependent on version) and scalable up to 50 networked boards and 150 units per system and supports full network compatibility with other FCP boards. Compact footprint and compliant with RoHS, CE and FCC. Acrosense Motor/Pump Controller Used for controlling a variety of motor types including brushed, brushless or stepper. Also can be used for controlling a variety of pump types including peristaltic, gear, diaphragm, centrifugal and membrane. Acrosense Sensor Controller Used for controlling a variety of sensors and encoders including pressure, flow, temperature, load-cell, oxygen, blood and bubble detection.