& olyurethane belts Endless timing belts age 3 Open-ended timing belts Special s Endless multi-rib belts Endless flat belts 7 11 15 17 SECIAL: Special pitches, coating and back profiles custom made 19
3 Endless timing belts
RO-DRIVE U endless timing belts are manufactured by a unique thermo-set moulding process. The high-grade polyurethane gives excellent abrasion and shear resistance, combined with a variety of graded steel cords, ensuring high strength and elongation stability. The result is a timing belt with excellent dimensional stability. RO-DRIVE U moulded timing belts are manufactured to a tight tolerance range, which assures consistent and thickness. The combination of these factors results in RO-DRIVE U, performing to the highest physical and chemical levels. RO-DRIVE U endless belts are suitable for high power and precision motion control, even at high speeds. These belts have the following features: MECANICAL features - Consistent dimensional stability - Low pre-tension - Low noise - igh abrasion resistance - Low maintenance - igh flexibility - Linear speeds of up to 80 m/sec CEMICAL features - Good resistance to - Ageing - ydrolysis - UVA rays - Ozone - Working temperature range -30 o C to +80 o C (Up to +1 o C for short periods) - igh resistance to oil, fat and grease - Good resistance to most acids and alkalis RO-DRIVE U endless belts perform especially well on light, synchronised and stepped drives, in office automation and domestic appliance applications. 4
AT 5 MXL 3.2/4.8/6.4 AT /12//// // MXL AT 2 5 280 300 330 340 3 390 4 4 455 0 5 545 600 6 660 7 7 7 780 8 860 9 11 00 itch 2 5 280 300 330 340 3 390 4 4 455 0 5 545 600 6 660 7 7 7 780 8 860 9 11 00 AT 5 6/8//12/// 370 0 560 600 6 660 700 730 780 800 840 880 890 9 960 980 0 80 1 11 10 12 12 1230 1240 12 1280 1300 10 13 1360 1400 14 1480 00 1700 17 1800 1860 1940 itch 370 0 560 600 6 660 700 730 780 800 840 880 890 9 960 980 0 80 1 11 10 12 12 1230 1240 12 1280 1300 10 13 1360 1400 14 1480 00 1700 17 1800 1860 1940 80055 80057 80060 80070 80072 800 80076 80079 80080 80082 80088 80091 80092 80096 801 802 803 805 801 80114 80118 801 80130 801 80135 80140 80145 801 80155 801 80190 800 80221 806 80280 80285 80308 803 80352 80360 80395 80405 80412 804 80454 80485 itch 111.7 115.8 121.9 142.2 146.3 152.4 154.4 0.5 2.5 6.6 178.8 184.9 186.9 195.1 5.2 7.2 9.2 213.3 223.5 231.6 239.7 243.8 264.1 268.2 274.3 284.4 294.6 304.8 314.9 355.6 386.5 406.8 449.1 5.1 568.9 579.1 6.8 674.6 715.2 731.5 802.6 822.9 837.1 877.8 922.5 985.5 5.0 2.7 1 1.2 XL 6.4/7.9/9.5 XL 60 70 76 80 90 1 1 130 134 140 1 0 170 180 190 194 0 2 2 230 240 2 260 270 288 290 300 356 414 4 566 itch 152.4 177.8 193.0 3.2 228.6 4.0 269.4 304.8 330.2 340.3 355.6 381.0 406.4 431.8 457.2 482.6 492.7 8.0 533.4 558.8 584.2 609.6 635.0 660.4 685.5 731.5 736.6 762.0 904.2 51.5 1143.0 1437.6 L 12.7/19.1/.4 L 86 124 1 187 2 2 2 240 5 270 285 300 2 345 367 390 4 4 480 5 540 570 600 itch 218.6 314.3 381.0 476.2 514.4 533.4 571.5 609.6 647.7 685.8 723.9 762.0 817.9 876.3 933.4 990.6 66.8 1143.0 1219.2 1295.4 1371.6 1447.8 1524.0 19.1/.4/38.1.8/76.2 230 240 270 300 330 360 390 4 4 480 5 itch 584.2 609.6 685.8 762.0 838.2 914.4 990.6 66.8 1143.0 1219.2 1295.4 12.7 4.30 1 2.29 9.5 3.60 1 1.65.0 4.5 1 2.5 2.0 1.2 1 0.51 5.080 2. 1 1. 5 Endless timing belts
T2 - T2.5 - T5 - T T 2.5 T 5 T T 2.5 DL 1 4/6/8//12 6/8//12/// /12//// // 4/6/8//12 T 2.5 T 5 T T 2.5 DL T5 - T* available without nose T2.5DL - T5DL - TDL AT5 - AT MXL - XL - L - 1 1 1 1 1 1 145 0 177.5 180 182.5 0 230 245 265 285 290 305 317.5 330 380 4 480 0 540 600 6 6 680 700 780 880 915 9 1185 2.5 1.3 1 0.7 T 2 itch 1 145 0 177.5 180 182.5 0 230 245 265 285 290 305 317.5 330 380 4 480 0 540 600 6 6 680 700 780 880 915 9 1185 4/6/8//12 180 0 288 T 2 2 1.1 1 0.5 itch 180 0 288 1 1 5 180 185 0 2 215 2 2 245 2 5 260 270 280 295 305 330 340 3 355 365 390 400 4 4 455 460 4 480 0 5 515* 5 545 5 560 560* 5 590 6 6 630 6 660 690 7 7 765 780 815 830 840 860 885 900 940 990 1 10 10 1215 12 1280 1315 1355 1380 1580 1955 itch 1 1 5 180 185 0 2 215 2 2 245 2 5 260 270 280 295 305 330 340 3 355 365 390 400 4 4 455 460 4 480 0 5 515* 5 545 5 560 560* 5 590 6 6 630 6 660 690 7 7 765 780 815 830 840 860 885 900 940 990 1 10 10 1215 12 1280 1315 1355 1380 1580 1955 260 340 370 390 400 4 440 4 480 0 530 560 600 600* 6 630 630* 660 680 690 700 7 730 7 780 8 840 880 890 900 900* 9 9 9* 960 970 980 80 11 1140 11 12 1240 12 1300 10 13 1390 1400 14 14 1460 1560 17 1780 1880 1960 22.0 4.5 1 2.5 itch 260 340 370 390 400 4 440 4 480 0 530 560 600 600* 6 630 630* 660 680 690 700 7 730 7 780 8 840 880 890 900 900* 9 9 9* 960 970 980 80 11 1140 11 12 1240 12 1300 10 13 1390 1400 14 14 1460 1560 17 1780 1880 1960 22 itch 457,5 DL 457,5 2.5 1.3 1 0.7 T 5 DL 6/8//12/// 4 DL 460 DL 590 DL 6 DL 7 DL 815 DL 860 DL 940 DL 1 DL T 5 DL 5.0 2.2 1 1.2 T DL /12//// // 260 DL 530 DL 630 DL 660 DL 7 DL 840 DL 9 DL 980 DL 12 DL 1240 DL 12 DL 10 DL 13 DL 14 DL DL 1880 DL T 5 DL.0 itch 4 460 590 6 7 815 860 940 1 itch 260 530 630 660 7 840 9 980 12 1240 12 10 13 14 1880 5.0 4.5 2.2 1 1.2 1 2.5 6
7 Open-ended timing belts
RO-DRIVE U open-ended timing belts are manufactured in thermoplastic polyurethane that gives superior wear and abrasion resistance. Various grades of steel cords offer good running characteristics, even with high tractive loads. Manufactured to tight tolerances, RO-DRIVE U open-ended delivers reliability and excellent dimensional stability. The addition of a Nylon coating on the teeth and/or back of the belt during production, enhances the running properties for specific applications. An extra thickness of polyurethane is also possible on the back of the belt, offering extra protection against aggressive or heavy products. RO-DRIVE U open-ended timing belts offers the following features: MECANICAL features - Consistent dimensional stability - Low pre-tension - Low noise - igh abrasion resistance - Low maintenance - igh flexibility - Linear speeds up to 80 m/sec - igh precision linear positioning CEMICAL features - Good resistance to - Ageing - ydrolysis - UVA rays - Ozone - Working temperature range -30 o C to +80 o C (Up to +1 o C for short periods) - igh resistance to oil, fat and grease - Good resistance to most acids and alkalis - Compatible for fabrication with other thermoplastic materials RO-DRIVE U open-ended is available as open rolls or as endless jointed belts. OEN LENGT belts These are manufactured as continuous s with the reinforcement in a parallel configuration. Standard roll s are or metres. Other s available on request. RO-DRIVE U belts are manufactured as an open and are normally used in linear motion drives. ENDLESS JOINTED belts By jointing using the thermoplastic properties of the open belt, endless belts can be produced to any by welding. The finished joint is resistant to fatigue from flexing and tension, due to the unique symmetrical V-shaped pattern of the joint. Endless jointed belts are suitable for conveying applications, particularly when indexing and/or positive drive is required. The supplementary application of flights, profiles and coating is possible to suit specific applications. RO-DRIVE U open-ended is also available with alternative reinforcement cords such as Kevlar (K), igh Flex (F), igh erformance () and igh erformance Flex (F). 8
Open-ended timing belts STD 5M STD 8M 1 2 4 12 15 30 85 1.0 2.0 4 55 5 3.4 1 1.91 8.0 5.1 1 3.05 R5 R8 R14 15 30 15 30 85 40 55 85 115 1 5 8 14 3.8 1 2.0 5.4 1 3.2.0 1 6.0 NFB and NFT T 5 T T 6 12 1 0* 1 5 2.2 4.5 8.0 1 1.2 1 2.5 1 5.0 ATG K13 ATG K13 G K13 1 1 38.1.8 76.2 1.6.0 12.7 4.5 8.0 4.3 1 2.5 1 5.0 1 2.29 B 13 B 13 B 13 h 6.5 h 6.5 h 6.5 *Only with kevlar cords and % cords less Joined belt 9
T5 - T - T AT3 - AT5 - AT - AT 1 MTD3M MTD5M 15 MTD8M 15 30 85 MTD14M 40 55 85 115 1 3 2.2 1 1.13 5 3.6 1 2.1 8 5.6 1 3.4 14.0 1 6.1 MTD3M - MTD5M - MTD8M - MTD14M XL L X STD 5M - STD 8M 1 0. 0.31 0.37 0. 1.00 1. 2.00 0.37 0. 0. 1.00 1. 2.00 4.00 0. 0. 1.00 1. 2.00 3.00 4.00 8.00* 0. 1.00 1. 2.00 3.00 4.00 6.00 1 5.08 9.5 12.7 22.2 2.30 3.60 4.30 11.2 R5 - R8 - R14 1 1.27 AT 3 1 1.90 AT 5 1 2.29 AT 1 6.35 AT XL - L - - X 1 6 1 1 0 1 3 1.9 5 2.7 4.5 8.0 1-2 - 4 1 1.1 TG5 K6 1 1.2 TG K6 1 2.5 TG K13 1 5.0 TG K13 TG5-TG-TG-ATG-ATG-G 1 h 5 2.2 4.5 4.5 8.0 1 1.2 1 2.5 1 2.5 1 5.0 B B 6 h 4 B 6 h 4 B 13 h 6.5 B 13 h 6.5
11 Special s
RO-DRIVE U special s timing belts are manufactured in thermoplastic polyurethane with continuous spiral steel cords. RO-DRIVE U belts are truly endless, enabling them to deliver exceptional performance. They are especially suited for power transmission, conveying high loads at high speeds (up to.000 Rpm). The addition of nylon coating on the teeth improves the running properties for specific applications and reduces the noise frictional coefficient. In addition, an extra thickness of special coating is also possible on the back of the belt thus offering extra protection against aggressive or heavy products. RO-DRIVE U TIMING BELTS ARE AVAILABLE IN LENGTS FROM 1.5OO TO 22.700 mm. RO-DRIVE U special s Special constructions: - igh flex cords - (NFT) nylon fabric on the teeth (Available from 1.900 mm long) - Custom milling, grinding and drilling to specification - Additional continuous coatings on the back of the belt in: - UR 85 o ShA - Tenax o ShA - Linatex 40 o ShA - Yellow UR 60 o ShA - Grey UR 60 o ShA - Neoprene rubber 70 o ShA Other hardness'es available on request. 12
Special s T5/T5DL T/TDL T/TDL 1 1 1 5 2.2 4.5 8.0 1 1.2 1 2.5 1 5.0 AT5/AT5DL AT/ATDL AT/ATDL AVAFC - U 85 shore A, linead on back. 1 1 1 5 2.7 4.5 8.0 1 1.2 1 2.5 1 5.0 R5/R5DL R8/R8DL R14/R14DL NFT - Nylon fabric on teeth low friction and noise. 15 85 1 15 85 1 15 85 1 5 8 14 3.8 5.4.0 1 2.0 1 3. 1 6.0 XL/XLDL L/LDL /DL X/XDL 19.53 12.7 19.1.4 38.1.8 76.2 1.6 152.4 19.53 12.7 19.1.4 38.1.8 76.2 1.6 152.4 19.53 12.7 19.1.4 38.1.8 76.2 1.6 152.4 19.53 12.7 19.1.4 38.1.8 76.2 1.6 152.4 5.08 9.5 12.7 22.2 2.3 3.6 4.3 11.2 13 1 1.27 1 1.9 1 2.29 1 6.35
T5-T-T T5DL-TDL-TDL 1 1 1 AT5-AT-AT AT5DL-ATDL-ATDL 1 1 XL-L--X 1 1 XLDL-LDL-DL-XDL 1 R5-R8-R14 1 1 R5DL-R8DL-R14DL 1 MTD8M 1 1 ATG 2 ATG K13 MTD8M 1 h B 1 1 1 2 2.0 8 4.5 5.6 1 2.5 B 13 1 3.4 h 6.5 14
15 Endless multi-rib belts
ROFLEX U belts are manufactured in polyurethane with polyester high tension cords, which combine the high flexibility of flat belts with the power transmission capability of V-belts. These belts have the following features: - Dimensional stability - igh flexibility - Small pulley diameters - igh speeds - Excellent oil, water and ozone resistance The main applications are: - Food processors - Grass cutting equipment - Electrical household appliances - Washing machines - Electrical tools - Woodworking equipment - Domestic power tools ROFLEX U SE are manufactured in polyurethane with a semi-elastic tension member. They can be fitted on fixed centre drives, reducing noise and vibration. The absence of a tensioning mechanism offers additional cost savings. These belts are available in a wide variety of rib pitches and s. (see below). J Standard (inches) Standard TB2 Standard J TB2 1,3 2,0 1,2 2,0 2,34 40 o 1,6 40 o 60 o 2,5 3,5 2,2 2 271 2 278 288 304 330 345 356 360 381 392 406 431 444 457 471 483 8 558 6 660 681 711 762 864 914 953 86 11 13 12 1239 1268 1397 87 7 8 1 114 1 130 135 140 142 1 154 0 170 1 180 185 190 0 2 240 260 268 280 300 340 360 376 398 428 440 458 474 488 0 590 178 217 223 227 229 295 330 340 3 389 400 485 7 588 602 609 6 768 935 0 86 11 13 13 1240 17 1976 156 170 190 0 2 231 248 266 295 3 7 330 333 345 360 380 390 400 430 480 5 526 535 598 630 660 6 7 770 1186
17 Endless flat belts
ROFLEX U flat belts are truly endless and mandrel moulded, available in both polyurethane or chloroprene rubber, with polyester, aramid or cotton reinforcements. These belts have the following features: - igh flexibility - Small pulley diameters - Dimensional accuracy - igh speed - Energy efficient - Low noise and vibration - Low maintenance - Good chemical and ozone resistance - igh friction surface ROFLEX U flat belts are particularly suitable for both power transmission and conveying. V T 1 T 0 TENSILE REINFORCEMENT polyester fabric polyester fabric polyester fabric Installation tension x cm width (N) endless 1 300 400 Min. pulley dia. mm 6 15 Thickness mm 0.5 0.9 1.1 Standard mm 0/38 0/38 0/38 Coating material Neoprene Neoprene Neoprene Antistatic Yes Yes Yes U 0 U 2 U 8 U 1 TENSILE REINFORCEMENT polyester fabric polyester fabric polyester fabric polyester fabric Installation tension x cm width (N) endless - 2 0 1 Min. pulley dia. mm 8 4 5 12 Thickness mm 0.9 1.8 0.8 1 Standard mm 1/10 0/ 240/38 0/38 Coating material olyurethane olyurethane olyurethane olyurethane Antistatic No ossible ossible ossible U 1 U 155 S 1 TENSILE REINFORCEMENT polyester fabric polyester fabric polyester fabric Installation tension x cm width (N) endless 3 400 1 Min. pulley dia. mm 12 Thickness mm 1.5 2 1.0 Standard mm 0/38 240/38 0/38 Coating material olyurethane olyurethane Silicon Antistatic ossible ossible ossible 18
Special Any special pitches, coating and back profiles custom made 19
Other products Industrial and Agricultural Belts Through a combination of excellent raw materials and stringent quality control, ROFLEX power transmission belts are regarded as being among the best in the market. Our extensive range covers widespread applications from industrial and agricultural machinery to household equipment. Both single and double variable-speed V-belts also constitute part of the ROFLEX range. Wrapped V-belts Raw-edge V-belts Raw-edge V-belts Variable speed V-belts Joined V-belts Multiribbed belts Double V-belts Capping belts Non-Fric belts Flat belts Rubber timing belts Garden and park belts Industrial oses ROULUNDS offer a wide range of hoses and tubes with widespread applications. Through close partnership with our customers, we design special hoses and tubes according to the customers specific requirements. Marketed under the trademark, our range of industrial hoses includes: Air and water hoses Gas and welding hoses Alimentary hoses Steam hoses Radiator hoses Oil and fuel hoses ydraulic hoses Breathing hoses A/C hoses Chemical hoses Material handling hoses Air brake hoses Niche hoses Customer-designed products Industrial ulleys ROULUNDS have a wide range range of industrial pulleys, available in different diameters. Our range includes: V-belt pulleys: taper bush and solid hub Timing belt pulleys: taper bush and solid hub Special pulleys: manufactured according to drawing
Sales Offices Europe ROULUNDS RUBBER A/S estehaven 51 DK-5260 Odense S Denmark Tel. (+45) 63 11 00 Fax (+45) 66 11 23 80 E-mail: Industrial WT: indu-agri@roulunds.dk Automotive: autoam@roulunds.dk www.roulunds.com CODAN GUMMI A/S Københavnsvej 4 DK-4600 Køge Denmark Tel.: (+45) 56 64 64 64 Fax: (+45) 56 64 64 21 E-mail: ha@codan.com www.codan.com ROULUNDS CODAN (Corby) Ltd. 8 Cronin Courtyard Weldon South Industrial Estate Corby, Northamptonshire NN18 8AG UK Tel. (+44) 1 536 Fax (+44) 1 536 53 85 E-mail: info@codan.co.uk www.roulunds.co.uk ROULUNDS CODAN (France) S.A. B.. 15, Z.I. d'angean Le arc 60240 Chaumont-en-Vexin France Tel. (+33) 3 44 49 55 60 Fax (+33) 3 44 49 55 61 E-mail: rcf@roulunds.fr www.roulunds.fr ROULUNDS CODAN (Germany) Gmb Laubenhof 23 D-456 Essen Germany Tel.: (+49) 1 834 0 Fax: (+49) 1 834 15 E-mail: roulunds.codan.germany@t-online.de ROULUNDS CODAN Norge AS Strømsveien 314 N 81 Oslo Norway Tel.: (+47) 2290 65 Fax: (+47) 22 83 E-mail: firmapost@codan-gummi.no www.roulundscodan.no TIC ROULUNDS (Italia) SpA Viale delle Industrie, 9, Z.I. 3 Ronchi di Villafranca adovana (D) Italy Tel. (+39) 0 49 90 70 422 Fax (+39) 0 49 90 70 447 E-mail: Industrial WT: rg@roulunds.it Automotive: mag@roulunds.it www.tic-roulunds.com DAN-BELT S.A. Calle Agricultura 11-21 Nave 1 olígono Industrial El la 08980-Sant Feliu Llobregat, Barcelona Spain Tel.: (+34) 93 6 7300 Fax: (+34) 93 6 7048 E-mail: danbeltsa@danbeltsa.com www.danbeltsa.com Asia ROULUNDS CODAN (India) Ltd. S-23, Green ark Extension New Delhi 1 India Tel. (+91) 11 2685 8136 Fax (+91) 11 2685 8137 E-mail: roulundscodan@roulundsindia.com www.roulundsindia.com ROULUNDS KOREA Ltd. 137-52 Yusan-dong Yangsan-City, Gyeongnam Korea Tel.: (+82) 55 380 8000 Fax: (+82) 55 386 8881 E-mail: rk@roulunds.co.kr www.roulunds.co.kr Americas ROULUNDS CODAN (Mexico) S.A. De C.V. enry Ford 23 Fracc. Ind San Nicolás Tlalnepantla, Edo. De México México 54030 Tel.: (+52) 55 53 99 97 Fax: (+52) 55 53 85 E-mail: tod@roulundscodan.com.mx www.roulundscodan.com.mx 21
014-1.0 roducts are subject to alterations without prior notice and no responsibility can be accepted for printing errors