TECHNICAL GUIDE AFFINITY TM SERIES SPLIT-SYSTEM HEAT PUMPS 16 SEER R-410A 1 PHASE 2 THRU 5 NOMINAL TONS S: YZF024 THRU 060 Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at www.upgnet.com and www.york.com Additional rating information can be found at www.ahridirectory.org WARRANTY SUMMARY* Extended 10-Years limited parts warranty. Extended Lifetime limited compressor warranty. Extended parts and compressor warranties require online registration within 90 days of purchase for replacement or closing for new home construction. * Does not apply to R-22 models, 3-Phase models, or internet sales. See Limited Warranty certificate in User's Information Manual for details. 632151-YTG-E-0812 DESCRIPTION The 16 SEER Series unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions. FEATURES Superior Coil Protection - A stamped, decorative metal coil guard protects the tube-in-fin coil from debris and other damaging material. Protected Compressor - The compressor is safeguarded against abnormal pressures and temperatures by an internal pressure relief valve, an internal temperature sensor, and factory high and low pressure system controls. A factory installed liquid line filter-drier further protects the compressor against moisture and debris. Environmentally Friendly Refrigerant - The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion. Durable Finish - An automotive quality finish provides the ultimate protection from harmful UV rays and rust creep, ensuring a long-lasting, high quality appearance. A powder-paint topcoat is applied over a baked-on primer using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater durability than conventional powder-coat finishes. Hot Heat Pump - An optional mode that slows the indoor fan for higher register air temperatures and premium comfort. QuietDrive System - Features combination of swept-wing fan, composite base pan, isolated compressor compartment, and single-stage compressor to reduce overall sound to a mere whisper. The 5-ton system utilizes a two-stage compressor. Low RPM Fan Motor - Helps to reduce airflow noise. Swept Wing Fan - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisperquiet operation by allowing air to flow smoothly and efficiently across the fan tips. Composite Base Pan - The strong and durable composite base pan provides added strength while resisting rust and corrosion, as well as reducing sound and vibration. Isolated Compressor Compartment - A molded composite bulkhead isolates the refrigeration components and the compressor from the rest of the unit, reducing sound and vibration. Lower Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment that allows easy access to control components, along with angled service valves to reduce overall installation time and cost. Factory charged for a 15 foot lineset. Factory Installed Filter-Drier - A factory installed, solid core liquid line filter-drier removes harmful debris and moisture from the system. Easy Service Access - A full end, full service access panel with handle makes for easy entry to internal components. Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat. Complete System Control - These heat pumps utilize the unique York Guard VI microprocessor defrost control system to provide optimal comfort as well as monitor the overall system for reliable operation. In the event improper operating conditions occur (high temperature and/or high pressure), the system will automatically shut the system down to extend the life of the heat pump. The defrost control features an internal memory to aid the technician in troubleshooting, reducing service time and cost. Premium System Warranty* - Limited lifetime compressor warranty when registered online within 90 days of installation. Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
Physical and Electrical Data Model YZF02413(C) YZF03013(C) YZF03613(C) YZF04214(C) YZF04813(C) YZF06013(C) Unit Supply Voltage 208-230V, 1 60Hz Normal Voltage Range 1 187 to 252 Minimum Circuit Ampacity 17.5 17.3 22.6 23.7 26.9 33.8 Max. Overcurrent Device Amps 2 30 30 35 40 45 50 Min. Overcurrent Device Amps 3 20 20 25 25 30 35 Compressor Type Scroll Scroll Scroll Scroll Scroll 2-Stage Scroll Rated Load 13.4 12.8 17 17.9 20.5 26 Compressor Amps Locked Rotor 58.3 64 77 112 115 118 Crankcase Heater No No No No No No Factory External Discharge Muffler Yes Yes Yes Yes Yes Yes Factory External Check Valve No No No No No No HS Kit Required with TXV 4 No No No No No No Fan Motor Amps Rated Load 0.7 1.3 1.3 1.3 1.3 1.3 Fan Diameter Inches 24 24 24 24 24 24 Rated HP 1/8 1/4 1/4 1/4 1/4 1/4 Fan Motor Nominal RPM 1075 850 850 850 850 850 Nominal CFM 2750 3800 3800 3800 3400 3700 Face Area Sq. Ft. 20.6 23.6 23.6 23.6 23.6 23.6 Coil Rows Deep 1 1 1 1 2 2 Fins / Inch 22 22 22 22 22 14 Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 7/8 7/8 1-1/8 Unit Charge (Lbs. - Oz.) 5 9-3 9-13 10-10 11-7 14-5 14-11 Charge Per Foot, Oz. 0.68 0.68 0.68 0.70 0.70 0.76 Operating Weight Lbs. 199 228 230 237 283 298 1. Rated in accordance with AHRI Standard 110-2012, utilization range A. 2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection. 3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection. 4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model. 5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value. Unit Model Dimensions (Inches) Refrigerant Connection Service Valve Size A B C Liquid Vapor 024 40 37 31 030 40 42-1/4 34 3/4 A 036 40 42-1/4 34 042 40 42-1/4 34 048 40 42-1/4 34 3/8 7/8 060 40 42-1/4 34 7/8* VAPOR LIQUID 2-3/8 3-1/8 6-1/2 C B * Adapter fitting required for 1-1/8 line set. Overall height is from bottom of base pan to top of fan guard. Overall length and width include screw heads. 2 Johnson Controls Unitary Products
System Charge for Various Matched Systems 632151-YTG-E-0812 Outdoor Unit YZF02413(C) YZF03013(C) YZF03613(C) YZF04214(C) YZF04813(C) YZF06013(C) Required TXV 1,2 4N1 4H1 4H1 4J1 4J1 4K1 Indoor Unit 3,4,5 Additional Charge, Oz AHE24B TXV + 0 AHE30B TXV + 0 AHE36C TXV + 0 AHE42D TXV + 0 AHE48D TXV + 20 TXV + 0 AHE60D TXV + 5 TXV + 0 TXV + 0 AHR24B TXV + 0 AHR36B TXV + 0 AHR42C TXV + 0 AHR60D TXV + 0 TXV + 0 AHV24B TXV + 0 AHV30B TXV + 0 AHV36C TXV + 12 TXV + 0 AHV42D TXV + 0 AHV48D TXV + 20 TXV + 0 AHV60D TXV + 5 TXV + 0 TXV + 0 AV*36 TXV + 12 TXV + 0 AV*48 TXV + 20 TXV + 0 FC/MC/PC32 TXV + 0 FC/MC/PC35 TXV + 0 FC/MC/PC37 TXV + 12 TXV + 0 FC/MC/PC43 TXV + 12 TXV + 0 FC/MC/PC48 TXV + 0 FC/MC/PC60 TXV + 20 TXV + 0 FC/PC62 TXV + 5 TXV + 0 TXV + 0 TXV + 8 TXV + 8 UC48 TXV + 15 UC60 TXV + 31 TXV + 2 Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil only matches, please see the COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils table. FOOTNOTES: 1. For applications requiring a TXV use S1-1TVM*** series kit. 2. A TXV kit must be used with these indoor units to obtain system performance. 3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224. 4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications. 5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches. Note: If a TXV is factory installed on the coil, it must be replaced with the listed TXV. PROCEDURES: 1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing. 2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table. 3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table. 4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length. 5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit + charge adder for line set. Johnson Controls Unitary Products 3
COOLING CAPACITY - With Air Handler Coils UNIT YZF02413(C) YZF03013(C) YZF03613(C) YZF04214(C) YZF04813(C) For notes, see Page 5. AIR HANDLER WIDTH COIL 1 STAGE RATED CFM 16 SEER HP WITH AIR HANDLERS TOTAL COOLING NET MBH SENS. SEER AHE24B 17.5 795 23.8 18.0 12.50 AHE30B 17.5 795 23.8 18.0 12.50 AHR24B 17.5-740 23.2 16.8 13.35 11.50 AHV24B 17.5-710 22.8 16.7 15.0 12.50 AHV30B 17.5-775 23.0 17.3 15.0 12.50 AHV36C 21.0-760 23.8 17.6 16.0 13.00 AV*36 21.0 725 23.8 17.4 16.00 13.00 MV12B 17.5 FC/MC35B 800 23.6 17.8 12.50 MV12B 17.5 FC/MC43B 800 24.0 18.6 16.00 13.00 MX12B 17.5 FC/MC35B 815 24.0 18.2 12.50 MX12B 17.5 FC/MC43B 735 23.8 17.6 12.50 AHE36C 21.0 1000 29.0 22.0 16.00 13.00 AHR36B 17.5-1060 28.4 21.8 13.35 11.50 AHV36C 21.0 895 28.2 20.0 12.50 AV*36 21.0 895 28.2 26.2 15.75 13.00 MV12B 17.5 FC/MC43B 1000 28.8 21.8 16.00 13.00 MV16C 21.0 FC/MC43C 1000 28.8 22.0 16.00 13.00 MX12B 17.5 FC/MC43B 1095 29.2 23.0 16.00 13.00 MX16C 21.5 FC/MC43B 970 28.0 21.8 12.50 AHE42D 21.0 1180 34.8 26.0 12.50 AHE48D 24.5 1195 35.4 26.6 12.50 AHR42C 21.0-1230 34.6 28.2 13.35 11.50 AHV42D 24.5 1180 35.4 27.0 12.50 AHV48D 24.5 1155 35.2 26.6 12.50 AV*48 24.5 1220 35.2 26.6 12.50 MV12D 24.5 FC/MC48D 1160 34.8 26.0 12.50 MV12D 24.5 FC/MC60D 1135 34.6 25.6 12.50 MV16C 21.0 FC/MC48C 1200 34.6 25.8 12.50 MX12D 24.5 FC/MC48D 1225 35.2 26.6 12.50 MX12D 24.5 FC/MC60D 1275 35.2 27.0 12.50 MX16C 21.0 FC/MC48C 1150 35.0 25.8 12.50 AHE48D 24.5-1200 39.5 28.0 12.50 AHE60D 24.5-1385 40.0 29.2 12.50 AHR60D 24.5-1350 39.0 28.2 13.25 11.35 AHV48D 24.5-1155 39.5 27.6 12.50 AHV60D 24.5-1340 39.5 28.6 14.50 12.00 AV*48 24.5-1220 40.0 28.8 12.50 MV16C 21.0 FC60C 1200 39.5 28.2 12.50 MV20D 24.5 FC/MC60D 1300 40.0 29.4 12.50 MV20D 24.5 1400 40.0 28.6 14.50 12.00 MX16C 21.0 FC60C 1150 39.5 28.4 12.50 MX20D 24.5 FC/MC60D 1295 40.5 29.6 12.50 MX20D 24.5 1470 40.5 30.2 12.50 AHE60D 24.5 1565 46.5 34.8 12.50 AHR60D 24.5-1620 46.0 42.5 13.35 11.50 AHV60D 24.5 1570 46.5 34.6 12.50 MV20D 24.5 1630 46.5 34.8 12.50 MV20D 24.5 1630 48.0 36.8 12.50 MX20D 24.5 1605 47.0 35.4 12.50 MX20D 24.5 1605 48.0 36.8 12.50 EER 4 Johnson Controls Unitary Products
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. = Not applicable. MA Modular Air Handlers use Coil Only Ratings. 1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. 632151-YTG-E-0812 COOLING CAPACITY - With Air Handler Coils (Continued) UNIT AIR HANDLER COIL 1 COOLING RATED NET MBH WIDTH STAGE SEER EER CFM TOTAL SENS. 16 SEER HP WITH AIR HANDLERS AHE60D 24.5 1 1160 47.0 30.4 2 1835 56.5 40.5 11.60 AHV60D 24.5 1 1090 45.5 30.2 20.65 15.35 2 1635 54.5 39.0 11.65 YZF06013(C) MV20D 24.5 1 1075 46.5 29.8 20.80 2 1630 56.0 39.0 11.80 MV20D 24.5 1 1075 48.0 31.2 21.60 2 1630 57.5 40.5 12.00 MX20D 24.5 1 1390 49.0 33.0 2 1795 56.5 40.5 11.85 MX20D 24.5 1 1390 50.5 34.4 2 1795 58.5 42.0 12.15 Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240. Cooling MBH based on 80 F entering air temperature, 50% RH (Relative Humidity), and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 F outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period. COOLING CAPACITY - With Upflow, Downflow, & Horizontal Furnaces and Coils (Coil Only Ratings) COIL COOLING UNIT CFM RANGE STAGE RATED NET MBH WIDTH (MIN.-MAX.) SEER 1 EER CFM TOTAL SENS. 16 SEER HP COIL ONLY RATINGS FC/MC/PC32 14.5 600-1000 800 23.2 17.2 13.35 11.50 YZF02413(C) FC/MC/PC35 17.5,21.0 600-1000 800 23.2 17.2 13.35 11.50 FC/MC/PC37 14.5 600-1000 800 23.6 17.5 13.35 11.50 FC/MC/PC43 17.5,21.0 600-1000 800 23.6 17.5 13.35 11.50 YZF03013(C) FC/MC/PC37 14.5 800-1200 1000 28.4 21.4 14.00 12.00 FC/MC/PC43 17.5,21.0 800-1200 1000 28.4 21.4 14.00 12.00 FC/MC/PC48 21.0,24.5 1000-1400 1200 34.4 25.6 13.35 11.50 YZF03613(C) FC/MC/PC60 21.0,24.5 1000-1400 1200 34.0 25.4 13.35 11.50 UC48 21.0,24.5 1000-1400 1200 34.4 25.6 13.25 11.35 UC60 21.0,24.5 1000-1400 1200 34.0 25.2 13.25 11.35 FC/MC/PC60 21.0.0,24.5.5 1200-1600 1200 38.5 27.0 13.25 11.35 YZF04214(C) FC/MC62 24.5.5 1200-1600 1400 39.0 28.0 13.00 11.00 UC60 21.0,24.5 1200-1600 1200 38.5 27.4 13.25 11.35 YZF04813(C) FC/MC62 24.5 1400-1800 1600 46.0 34.4 13.35 11.50 24.5 1400-1800 1600 47.0 35.6 13.35 11.50 YZF06013(C) FC/MC62 24.5 1150-1550 1 1350 48.0 31.8 1600-2000 2 1800 55.5 39.5 11.10 24.5 1150-1550 1 1350 49.5 33.2 1600-2000 2 1800 57.5 41.5 11.40 Johnson Controls Unitary Products 5
COOLING CAPACITY - With High Efficiency Motor Furnaces UNIT YZF02413(C) YZF03013(C) For notes, see Page 8. FURNACE WIDTH COIL 1 RATED CFM COOLING NET MBH TOTAL SENS. SEER 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 T*(8,L)V*A12 14.5 FC/MC/PC32A 755 23.4 17.3 12.50 T*(8,L)V*A12 14.5 FC/MC/PC37A 765 23.8 17.7 12.50 T*(8,L)V*B12 17.5 FC/MC/PC35B 785 23.6 17.6 12.50 T*(8,L)V*B12 17.5 FC/MC/PC43B 790 24.0 18.0 12.50 T*(8,L)V*C16 21.0 FC/MC/PC35C 775 23.6 17.6 12.50 T*(8,L)V*C16 21.0 FC/MC/PC43C 770 24.0 17.8 16.00 13.00 T*(8,L)V*C20 21.0 FC/MC/PC35C 755 23.6 17.4 12.50 T*(8,L)V*C20 21.0 FC/MC/PC43C 740 23.8 17.5 12.50 T*(8,L)X*A12 14.5 FC/MC/PC32A 800 23.8 17.9 12.50 T*(8,L)X*A12 14.5 FC/MC/PC37A 840 24.0 18.7 16.00 13.00 T*(8,L)X*B12 17.5 FC/MC/PC35B 850 24.0 18.2 12.50 T*(8,L)X*B12 17.5 FC/MC/PC43B 865 24.0 18.7 16.00 13.00 T*(8,L)X*C16 21.0 FC/MC/PC35C 865 24.0 18.2 12.50 T*(8,L)X*C16 21.0 FC/MC/PC43C 855 24.0 18.7 16.00 13.00 T*(8,L)X*C20 21.0 FC/MC/PC35C 885 24.0 18.1 12.50 T*(8,L)X*C20 21.0 FC/MC/PC43C 815 24.0 18.6 16.00 13.00 T*9(C,V)*B12 17.5 FC/MC/PC35B 815 23.8 18.0 12.50 T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 18.5 12.50 T*9(C,V)*C16 21.0 FC/MC/PC35C 900 24.0 18.8 12.50 T*9(C,V)*C16 21.0 FC/MC/PC43C 810 24.0 18.6 16.00 13.00 T*9(C,V)*C20 21.0 FC/MC/PC35C 755 23.6 17.4 12.50 T*9(C,V)*C20 21.0 FC/MC/PC43C 890 24.0 19.1 16.00 13.00 T*9V*A10 14.5 FC/MC/PC32A 785 23.4 17.3 14.00 12.00 T*9V*A10 14.5 FC/MC/PC37A 790 23.6 17.7 14.00 12.00 T*9X*A10 14.5 FC/MC/PC32A 745 23.2 17.0 14.55 12.00 T*9X*A10 14.5 FC/MC/PC37A 740 23.4 17.2 14.75 12.00 T*9X*B12 17.5 FC/MC/PC35B 785 23.8 17.7 12.50 T*9X*B12 17.5 FC/MC/PC43B 800 24.0 18.7 16.00 13.00 T*9X*C16 21.0 FC/MC/PC35C 765 23.6 17.5 12.50 T*9X*C16 21.0 FC/MC/PC43C 785 24.0 18.0 16.00 13.00 T*9X*C20 21.0 FC/MC/PC35C 825 24.0 18.1 12.50 T*9X*C20 21.0 FC/MC/PC43C 790 24.0 18.1 16.00 13.00 Y*(8,L)C*A12 14.5 FC/MC/PC32A 755 23.4 17.3 12.50 Y*(8,L)C*A12 14.5 FC/MC/PC37A 765 23.8 17.7 12.50 Y*(8,L)C*B12 17.5 FC/MC/PC35B 785 23.6 17.6 12.50 Y*(8,L)C*B12 17.5 FC/MC/PC43B 790 24.0 18.0 12.50 Y*(8,L)C*C16 21.0 FC/MC/PC35C 775 23.6 17.6 12.50 Y*(8,L)C*C16 21.0 FC/MC/PC43C 770 24.0 17.8 16.00 13.00 Y*(8,L)C*C20 21.0 FC/MC/PC35C 755 23.6 17.4 12.50 Y*(8,L)C*C20 21.0 FC/MC/PC43C 740 23.8 17.5 12.50 Y*9C*B12 17.5 FC/MC/PC35B 815 23.8 18.0 12.50 Y*9C*B12 17.5 FC/MC/PC43B 800 24.0 18.5 12.50 Y*9C*C16 21.0 FC/MC/PC35C 900 24.0 18.8 12.50 Y*9C*C16 21.0 FC/MC/PC43C 810 24.0 18.6 16.00 13.00 Y*9C*C20 21.0 FC/MC/PC35C 755 23.6 17.4 12.50 Y*9C*C20 21.0 FC/MC/PC43C 890 24.0 19.1 16.00 13.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 950 28.4 21.2 12.50 T*(8,L)V*B12 17.5 FC/MC/PC43B 1045 28.8 22.2 12.50 T*(8,L)V*C16 21.0 FC/MC/PC43C 1035 29.0 22.4 12.50 T*(8,L)V*C20 21.0 FC/MC/PC43C 1025 29.2 22.4 12.50 T*(8,L)X*A12 14.5 FC/MC/PC37A 1090 29.2 23.0 12.50 T*(8,L)X*B12 17.5 FC/MC/PC43B 1090 29.2 23.0 12.50 T*(8,L)X*C16 21.0 FC/MC/PC43C 955 28.8 21.6 12.50 T*(8,L)X*C20 21.0 FC/MC/PC43C 870 28.2 20.6 12.50 T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 28.8 22.0 12.50 EER 6 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT COIL WIDTH 1 RATED CFM YZF03013(C) YZF03613(C) YZF04214(C) For notes, see Page 8. COOLING NET MBH TOTAL SENS. 632151-YTG-E-0812 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 28.8 22.2 12.50 T*9(C,V)*C20 21.0 FC/MC/PC43C 995 28.8 21.8 12.50 T*9X*B12 17.5 FC/MC/PC43B 1095 29.4 23.0 12.50 T*9X*C16 21.0 FC/MC/PC43C 1055 29.4 23.0 12.50 Y*(8,L)C*A12 14.5 FC/MC/PC37A 950 28.4 21.2 12.50 Y*(8,L)C*B12 17.5 FC/MC/PC43B 1045 28.8 22.2 12.50 Y*(8,L)C*C16 21.0 FC/MC/PC43C 1035 29.0 22.4 12.50 Y*(8,L)C*C20 21.0 FC/MC/PC43C 1025 29.2 22.4 12.50 Y*9C*B12 17.5 FC/MC/PC43B 1035 28.8 22.0 12.50 Y*9C*C16 21.0 FC/MC/PC43C 1030 28.8 22.2 12.50 Y*9C*C20 21.0 FC/MC/PC43C 995 28.8 21.8 12.50 T*(8,L)V*C16 21.0 FC/MC/PC48C 1195 34.6 25.8 12.50 T*(8,L)V*C16 21.0 FC/PC60C 1185 34.8 25.6 12.50 T*(8,L)V*C16 21.0 UC48C 1210 34.6 26.0 12.50 T*(8,L)V*C16 21.0 1195 34.4 25.6 12.50 T*(8,L)V*C20 21.0 FC/MC/PC48C 1150 34.6 25.8 12.50 T*(8,L)V*C20 21.0 FC/PC60C 1215 35.0 26.4 12.50 T*(8,L)V*C20 21.0 UC48C 1155 34.6 26.0 12.50 T*(8,L)V*C20 21.0 1215 34.4 25.6 12.50 T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 34.8 26.0 12.50 T*(8,L)X*C16 21.0 FC/PC60C 1190 34.8 25.8 12.50 T*(8,L)X*C16 21.0 UC48C 1185 34.8 26.2 12.50 T*(8,L)X*C16 21.0 1190 34.6 25.8 12.50 T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 35.4 27.0 12.50 T*(8,L)X*C20 21.0 FC/PC60C 1275 35.4 27.2 12.50 T*(8,L)X*C20 21.0 UC48C 1270 35.0 26.8 12.50 T*(8,L)X*C20 21.0 1275 34.8 26.6 12.50 T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 35.0 26.6 12.50 T*9(C,V)*D20 24.5 FC/MC/PC60D 1225 35.0 26.4 12.50 T*9X*C16 21.0 FC/MC/PC48C 1280 35.2 27.0 12.50 T*9X*C16 21.0 FC/PC60C 1315 35.4 27.4 12.50 T*9X*C16 21.0 UC48C 1280 34.8 26.8 12.50 T*9X*C16 21.0 1300 34.8 26.8 12.50 T*9X*C20 21.0 FC/MC/PC48C 1205 34.6 25.8 12.50 T*9X*C20 21.0 FC/PC60C 1240 35.2 26.8 12.50 T*9X*C20 21.0 UC48C 1205 34.6 26.0 12.50 T*9X*C20 21.0 1240 34.4 25.6 12.50 T*9X*D20 24.5 FC/MC/PC48D 1240 35.2 26.8 12.50 T*9X*D20 24.5 FC/MC/PC60D 1310 35.6 27.6 12.50 T*9X*D20 24.5 UC48D 1240 34.6 26.0 12.50 T*9X*D20 24.5 UC60D 1310 35.0 27.0 12.50 Y*(8,L)C*C16 21.0 FC/MC/PC48C 1195 34.6 25.8 12.50 Y*(8,L)C*C16 21.0 FC/PC60C 1185 34.8 25.6 12.50 Y*(8,L)C*C16 21.0 UC48C 1210 34.6 26.0 12.50 Y*(8,L)C*C16 21.0 1195 34.4 25.6 12.50 Y*(8,L)C*C20 21.0 FC/MC/PC48C 1150 34.6 25.8 12.50 Y*(8,L)C*C20 21.0 FC/PC60C 1215 35.0 26.4 12.50 Y*(8,L)C*C20 21.0 UC48C 1155 34.6 26.0 12.50 Y*(8,L)C*C20 21.0 1215 34.4 25.6 12.50 Y*9C*D20 24.5 FC/MC/PC48D 1240 35.0 26.6 12.50 Y*9C*D20 24.5 FC/MC/PC60D 1225 35.0 26.4 12.50 T*(8,L)V*C16 21.0 1420 40.0 29.2 14.50 12.00 T*(8,L)V*C16 21.0 FC/PC60C 1185 39.0 27.6 12.50 T*(8,L)V*C16 21.0 1195 39.0 27.8 12.50 T*(8,L)V*C20 21.0 1365 39.5 28.4 14.50 12.00 T*(8,L)V*C20 21.0 FC/PC60C 1215 39.5 28.4 12.50 Johnson Controls Unitary Products 7 SEER EER
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT COIL WIDTH 1 RATED CFM YZF04214(C) YZF04813(C) 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 T*(8,L)V*C20 21.0 1215 39.0 27.8 12.50 T*(8,L)X*C16 21.0 1360 40.0 28.6 12.50 T*(8,L)X*C16 21.0 FC/PC60C 1190 39.5 27.6 12.50 T*(8,L)X*C16 21.0 1190 39.5 28.0 12.50 T*(8,L)X*C20 21.0 1485 40.5 30.2 12.50 T*(8,L)X*C20 21.0 FC/PC60C 1275 40.0 29.2 12.50 T*(8,L)X*C20 21.0 1275 40.0 28.8 12.50 T*9(C,V)*C16 21.0 1445 39.5 29.0 14.00 11.65 T*9(C,V)*C16 21.0 FC/PC60C 1235 40.0 28.6 14.50 12.00 T*9(C,V)*C16 21.0 1235 39.0 27.6 14.50 12.10 T*9(C,V)*C20 21.0 1445 40.0 29.4 14.00 11.65 T*9(C,V)*C20 21.0 FC/PC60C 1330 40.5 29.6 14.50 12.00 T*9(C,V)*C20 21.0 1330 39.5 29.0 14.50 12.00 T*9(C,V)*D20 24.0 FC/MC/PC60D 1225 39.5 28.4 12.50 T*9(C,V)*D20 24.0 1455 40.0 29.6 14.50 12.00 T*9(C,V)*D20 24.0 UC60D 1225 39.0 27.8 14.50 12.00 T*9X*C16 21.0 1460 40.0 29.8 14.50 12.00 T*9X*C16 21.0 FC/PC60C 1315 40.5 29.6 12.50 T*9X*C16 21.0 1315 39.5 29.0 12.50 T*9X*C20 21.0 1460 40.5 29.8 14.50 12.00 T*9X*C20 21.0 FC/PC60C 1240 40.0 28.8 12.50 T*9X*C20 21.0 1240 39.0 27.8 12.50 T*9X*D20 24.0 FC/MC/PC60D 1310 40.5 29.8 12.50 T*9X*D20 24.0 1425 40.0 29.4 14.50 12.00 T*9X*D20 24.0 UC60D 1310 40.0 29.2 12.50 Y*(8,L)C*C16 21.0 1420 40.0 29.2 14.50 12.00 Y*(8,L)C*C16 21.0 FC/PC60C 1185 39.0 27.6 12.50 Y*(8,L)C*C16 21.0 1195 39.0 27.8 12.50 Y*(8,L)C*C20 21.0 1365 39.5 28.4 14.50 12.00 Y*(8,L)C*C20 21.0 FC/PC60C 1215 39.5 28.4 12.50 Y*(8,L)C*C20 21.0 1215 39.0 27.8 12.50 Y*9C*C16 21.0 1445 39.5 29.0 14.00 11.65 Y*9C*C16 21.0 FC/PC60C 1235 40.0 28.6 14.50 12.00 Y*9C*C16 21.0 1235 39.0 27.6 14.50 12.10 Y*9C*C20 21.0 1445 40.0 29.4 14.00 11.65 Y*9C*C20 21.0 FC/PC60C 1330 40.5 29.6 14.50 12.00 Y*9C*C20 21.0 1330 39.5 29.0 14.50 12.00 Y*9C*D20 24.0 FC/MC/PC60D 1225 39.5 28.4 12.50 Y*9C*D20 24.0 1455 40.0 29.6 14.50 12.00 Y*9C*D20 24.0 UC60D 1225 39.0 27.8 14.50 12.00 T*(8,L)V*C16 21.0 1635 47.5 36.6 12.50 T*(8,L)V*C20 21.0 1630 47.5 36.6 12.50 T*(8,L)X*C16 21.0 1610 48.0 36.6 12.50 T*(8,L)X*C20 21.0 1665 47.0 35.8 12.50 T*(8,L)X*C20 21.0 1665 48.0 36.8 12.50 T*9(C,V)*C16 21.0 1590 47.5 36.4 12.50 T*9X*C16 21.0 1550 47.5 36.6 12.50 T*9X*C20 21.0 1595 46.5 34.8 12.50 T*9X*C20 21.0 1595 48.0 36.8 12.50 T*9X*D20 24.5 1610 47.5 36.6 12.50 Y*(8,L)C*C16 21.0 1635 47.5 36.6 12.50 Y*(8,L)C*C20 21.0 1630 47.5 36.6 12.50 Y*9C*C16 21.0 1590 47.5 36.4 12.50 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. COOLING NET MBH TOTAL SENS. SEER EER 8 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces UNIT YZF06013(C) FURNACE COIL WIDTH 1 STAGE RATED CFM 16 SEER HP WITH HIGH EFFICIENCY FURNACES 2 T*(8,L)V*C16 21.0 T*(8,L)V*C20 21.0 T*(8,L)V*C16 21.0 T*(8,L)V*C20 21.0 T*(8,L)X*C16 21.0 T*(8,L)X*C16 21.0 T*(8,L)X*C20 21.0 T*9(C,V)*C16 21.0 T*9(C,V)*C20 21.0 T*9(C,V)*D20 24.5 T*9(C,V)*C16 21.0 T*9(C,V)*C20 21.0 T*9(C,V)*D20 24.5 T*9X*C16 21.0 T*9X*C16 21.0 T*9X*C20 21.0 T*9X*C20 21.0 T*9X*D20 24.5 T*9X*D20 24.5 Y*(8,L)C*C16 21.0 Y*(8,L)C*C20 21.0 Y*(8,L)C*C16 21.0 Y*(8,L)C*C20 21.0 Y*9C*C16 21.0 Y*9C*C20 21.0 Y*9C*D20 24.5 Y*9C*C16 21.0 Y*9C*C20 21.0 Y*9C*D20 24.5 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. COOLING NET MBH TOTAL SENS. 632151-YTG-E-0812 Johnson Controls Unitary Products 9 SEER EER 1 1025 46.5 29.8 20.80 2 1635 55.5 38.5 11.45 1 1060 46.5 29.8 20.80 2 1620 55.5 39.0 11.60 1 1025 48.0 31.2 21.60 2 1635 57.0 40.0 11.75 1 1060 48.0 31.2 21.60 2 1630 57.0 40.0 11.85 1 1115 46.5 29.8 20.80 2 1610 55.5 39.0 11.65 1 1115 48.0 31.2 21.60 2 1610 57.0 40.0 11.90 1 835 45.0 28.0 20.35 2 1665 57.5 40.5 12.00 1 1040 46.5 29.8 20.80 2 1590 55.5 38.5 11.40 1 1040 46.5 29.8 20.80 2 1655 55.0 38.5 11.25 1 1085 46.5 29.8 20.80 2 1630 55.5 38.5 11.35 1 1040 48.0 31.2 21.60 2 1590 57.0 40.0 11.70 1 1040 48.0 31.2 21.60 2 1655 56.5 40.0 11.50 1 1085 48.0 31.2 21.60 2 1630 57.0 40.0 11.65 1 1085 48.0 31.2 21.60 2 1550 57.0 40.0 11.85 1 1085 46.5 29.8 20.80 2 1550 55.5 39.0 11.60 1 1220 47.5 31.2 20.35 2 1595 55.5 38.5 11.70 1 1220 49.5 32.6 21.10 2 1595 57.0 40.0 12.00 1 1240 48.0 31.4 20.50 2 1610 55.0 38.5 11.50 1 1240 49.5 32.8 21.25 2 1610 57.0 40.0 11.85 1 1025 46.5 29.8 20.80 2 1635 55.5 38.5 11.45 1 1060 46.5 29.8 20.80 2 1620 55.5 39.0 11.60 1 1025 48.0 31.2 21.60 2 1635 57.0 40.0 11.75 1 1060 48.0 31.2 21.60 2 1630 57.0 40.0 11.85 1 1040 46.5 29.8 20.80 2 1590 55.5 38.5 11.40 1 1040 46.5 29.8 20.80 2 1655 55.0 38.5 11.25 1 1085 46.5 29.8 20.80 2 1630 55.5 38.5 11.35 1 1040 48.0 31.2 21.60 2 1590 57.0 40.0 11.70 1 1040 48.0 31.2 21.60 2 1655 56.5 40.0 11.50 1 1085 48.0 31.2 21.60 2 1630 57.0 40.0 11.65
\ HEATING CAPACITY - With Air Handler Coils UNIT YZF02413(C) YZF03013(C) YZF03613(C) For notes, see Page 11. AIR HANDLER COIL 1 RATED CFM HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 16 SEER HP WITH AIR HANDLERS AHE24B 795 23.8 3.88 1.80 15.1 2.56 1.73 8.50 515* 23.4 3.63 1.92 15.1 2.56 1.73 8.40 AHE30B 795 23.8 3.88 1.80 15.1 2.56 1.73 8.50 515* 23.4 3.63 1.92 15.1 2.56 1.73 8.40 AHR24B 740 24.2 3.64 1.95 15.1 2.40 1.84 7.85 AHV24B 710 24.0 3.70 1.90 15.2 2.44 1.83 9.00 470* 23.8 3.54 1.97 14.6 2.38 1.80 8.50 AHV30B 775 24.0 3.78 1.86 15.3 2.50 1.79 9.00 500* 24.0 3.74 1.88 14.8 2.52 1.72 8.50 AHV36C 760 24.0 4.08 1.72 15.3 2.70 1.66 9.00 485* 24.0 3.80 1.85 14.8 2.56 1.69 8.50 AV*36 725 23.8 3.92 1.78 14.8 2.66 1.63 9.00 630* 23.8 3.74 1.86 14.6 2.52 1.70 8.85 MV12B FC/MC35B 800 24.0 3.82 1.84 15.0 2.54 1.73 8.50 600* 23.8 3.54 1.97 14.6 2.38 1.80 8.50 MV12B FC/MC43B 800 24.0 4.02 1.76 14.9 2.70 1.62 9.00 600* 23.8 3.62 1.93 14.6 2.44 1.75 8.55 MX12B FC/MC35B 815 23.8 3.92 1.78 14.8 2.60 1.67 9.00 660* 23.8 3.70 1.88 14.5 2.48 1.71 8.95 MX12B FC/MC43B 735 23.8 3.90 1.79 14.8 2.64 1.64 9.00 620* 23.8 3.68 1.89 14.5 2.48 1.71 8.90 AHE36C 1000 29.4 4.02 2.14 19.0 2.78 2.00 9.00 600* 29.1 3.73 2.28 19.0 2.78 2.00 8.80 AHR36B 1060 30.0 4.00 2.17 19.9 2.78 2.00 9.15 AHV36C 895 29.6 3.88 2.24 19.1 2.72 2.06 9.00 640* 28.8 3.68 2.29 18.8 2.54 2.17 9.00 AV*36 960 29.4 4.02 2.14 18.9 2.80 1.98 9.00 725* 28.9 3.75 2.26 18.9 2.80 1.98 9.00 MV12B FC/MC43B 1000 29.6 3.88 2.24 19.1 2.72 2.06 9.00 800* 29.0 3.72 2.28 18.8 2.54 2.17 9.00 MV16C FC/MC43C 1000 29.6 3.96 2.19 19.0 2.76 2.02 9.00 MX12B FC/MC43B 1095 29.8 4.04 2.16 19.1 2.78 2.01 9.00 620* 29.1 3.73 2.28 19.0 2.78 2.00 8.80 MX16C FC/MC43C 970 28.8 3.76 2.24 18.8 2.66 2.07 9.00 AHE42D 1180 35.6 3.98 2.62 23.2 2.78 2.45 9.00 685* 35.0 3.40 3.29 23.2 2.80 2.43 8.80 AHE48D 1195 35.0 3.90 2.62 23.2 2.76 2.45 9.00 AHR42C 1230 37.0 3.78 2.87 24.0 2.64 2.66 7.85 AHV42D 1180 36.0 3.68 2.87 23.6 2.50 2.77 9.00 790* 35.8 3.66 2.87 22.8 2.72 2.46 8.50 AHV48D 1155 36.0 3.62 2.91 23.6 2.44 2.83 9.00 835* 35.6 3.64 2.87 22.6 2.66 2.49 8.50 AV*48 1220 36.0 4.20 2.55 23.2 2.92 2.33 9.00 960* 36.0 3.40 3.19 23.2 2.92 2.33 9.00 MV12D FC/MC48D 1160 36.0 3.98 2.65 23.2 2.80 2.43 9.00 1000* 36.0 3.40 3.29 23.2 2.80 2.43 9.00 MV12D FC/MC60D 1135 36.0 4.10 2.60 23.2 2.86 2.38 9.00 1000* 36.0 3.40 3.24 23.2 2.86 2.38 9.00 MV16C FC/MC48C 1200 36.0 3.92 2.71 23.4 2.76 2.48 9.00 1000* 36.0 3.40 3.35 23.4 2.76 2.48 9.00 MX12D FC/MC48D 1225 35.6 3.96 2.63 23.2 2.80 2.43 9.00 850* 35.0 3.40 3.29 23.2 2.80 2.43 8.80 MX12D FC/MC60D 1275 35.6 4.20 2.48 23.2 2.88 2.36 9.00 850* 35.0 3.40 3.29 23.2 2.80 2.43 8.80 MX16C FC/MC48C 1150 35.8 3.96 2.65 23.0 2.80 2.41 9.00 995* 35.6 3.62 2.88 22.8 2.70 2.47 8.95 10 Johnson Controls Unitary Products
HEATING CAPACITY - With Air Handler Coils (Continued) UNIT AIR HANDLER COIL 1 HEATING 2 RATED 47 F 17 F HSPF CFM MBH COP KW MBH COP KW STD 16 SEER HP WITH AIR HANDLERS AHE48D 1200 40.5 3.88 3.06 25.6 2.68 2.80 8.50 1000* 39.5 3.98 2.91 25.8 2.86 2.64 9.20 AHE60D 1385 40.0 4.12 2.84 25.4 2.76 2.70 9.00 1150* 39.5 3.98 2.91 25.4 2.76 2.70 8.98 AHR60D 1350 41.0 3.94 3.05 26.2 2.66 2.89 7.80 AHV48D 1155 40.5 3.84 3.09 25.6 2.66 2.82 8.50 875* 39.5 3.90 2.97 26.0 2.74 2.78 9.00 AHV60D 1340 40.0 4.04 2.90 25.6 2.74 2.74 8.50 955* 39.5 3.98 2.91 25.4 2.76 2.70 9.00 AV*48 1220 41.0 4.12 2.92 25.6 2.82 2.66 9.00 YZF04214(C) 1200 41.0 4.08 2.94 25.6 2.80 2.68 8.50 MV16C FC60C 1000* 40.0 3.84 3.05 25.4 2.74 2.72 8.98 MV20D FC/MC60D 1300 41.0 4.16 2.89 25.6 2.84 2.64 8.50 MV20D 1400 40.5 4.10 2.89 25.6 2.76 2.72 8.50 1300* 40.0 4.12 2.84 25.4 2.70 2.76 8.98 MX16C FC60C 1150 40.5 4.12 2.88 25.4 2.82 2.64 9.00 995* 40.0 3.90 3.01 25.2 2.76 2.68 8.98 MX20D FC/MC60D 1295 41.0 4.24 2.83 25.4 2.88 2.58 9.00 MX20D 1470 40.0 4.24 2.76 25.4 2.84 2.62 9.00 1260* 39.5 4.12 2.81 25.4 2.72 2.74 8.98 AHE60D 1565 47.0 3.80 3.62 33.4 2.70 3.62 9.00 1160* 46.8 3.33 4.30 33.4 2.72 3.60 8.80 AHR60D 1620 51.0 3.64 4.11 34.2 2.60 3.85 7.85 AHV60D 1570 48.0 3.74 3.76 33.8 2.66 3.72 9.00 1000* 48.0 3.34 4.21 32.0 2.52 3.72 8.50 1630 48.0 3.78 3.91 33.6 2.70 3.65 9.00 MV20D YZF04813(C) 1000* 48.0 3.29 4.38 33.6 2.70 3.65 9.00 MV20D 1630 48.0 3.94 3.79 34.0 2.78 3.58 9.00 1000* 48.0 3.45 4.26 34.0 2.78 3.58 9.00 MX20D 1605 47.0 3.86 3.57 33.2 2.76 3.52 9.00 1260* 46.9 3.56 4.03 32.4 2.62 3.62 8.80 MX20D 1605 47.0 3.98 3.46 33.6 2.82 3.49 9.00 1260* 46.9 3.66 3.92 32.6 2.72 3.51 8.85 1. Rated CFM same as for cooling. 2. Heating MBH based on AHRI standards of 70 F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. * Notates Hot Heat Pump performance. These ratings are not AHRI Listed. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. MA Modular Air Handlers use Coil Only Ratings. Johnson Controls Unitary Products 11
HEATING CAPACITY - With Air Handler Coils UNIT AIR HANDLER COIL 1 HEATING 2 RATED NET MBH STAGE HSPF COP @ 47 CFM 47 OD 17 OD 16 SEER HP WITH AIR HANDLERS 1 1160 42.5 3.46 AHE60D 2 1835 58.0 39.0 9.00 3.80 2 1160* 57.0 38.5 8.60 3.28 1 1090 41.5 3.30 AHV60D 2 1635 59.5 38.0 8.95 3.60 2 1090* 57.5 37.0 8.70 3.46 1 1075 41.5 3.42 MV20D 2 1630 58.0 38.0 9.00 3.72 YZF06013(C) 2 1075* 57.5 38.5 9.00 3.24 1 1075 42.0 3.52 MV20D 2 1630 58.0 38.0 9.00 3.82 2 1075* 58.0 38.5 9.00 3.32 1 1390 43.0 3.62 MX20D 2 1795 58.0 38.5 9.00 3.80 2 1390* 57.0 38.5 8.60 3.52 1 1390 44.0 3.72 MX20D 2 1795 58.0 39.0 9.00 3.94 2 1390* 57.0 39.0 8.60 3.62 1. Rated CFM same as for cooling. 2. Heating MBH based on AHRI standards of 70 F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. * Notates Hot Heat Pump performance. These ratings are not AHRI Listed. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. MA Modular Air Handlers use Coil Only Ratings. HEATING CAPACITY - With Upflow, Downflow, & Horizontal Furnaces and Coils (Coil Only Ratings) UNIT COIL 1 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 16 SEER HP COIL ONLY RATINGS FC/MC/PC32 23.6 3.56 1.94 15.6 2.38 1.92 7.80 YZF02413(C) FC/MC/PC35 23.6 3.56 1.94 15.6 2.38 1.92 7.80 FC/MC/PC37 23.6 3.70 1.87 15.5 2.50 1.82 7.80 FC/MC/PC43 23.6 3.70 1.87 15.5 2.50 1.82 7.80 YZF03013(C) FC/MC/PC37 29.6 3.74 2.32 19.7 2.62 2.20 8.20 FC/MC/PC43 29.6 3.74 2.32 19.7 2.62 2.20 8.20 FC/MC/PC48 35.6 3.70 2.82 24.0 2.62 2.68 7.80 YZF03613(C) FC/MC/PC60 35.6 3.86 2.70 23.8 2.72 2.56 7.80 UC48 36.0 3.86 2.82 24.0 2.68 2.62 7.80 UC60 36.0 3.84 2.84 23.4 2.60 2.64 7.80 FC/MC/PC60 41.0 3.70 3.25 26.4 2.52 3.07 7.80 YZF04214(C) FC/MC62 41.0 3.88 3.10 26.4 2.62 2.95 7.80 UC60 41.5 3.80 3.20 26.0 2.60 2.93 7.80 YZF04813(C) FC/MC62 47.0 3.64 3.78 34.2 2.60 3.85 7.80 47.0 3.76 3.66 34.8 2.66 3.83 7.80 1. Rated CFM same as for cooling. 2. Heating MBH based on ARI standards of 70 F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. 12 Johnson Controls Unitary Products
HEATING CAPACITY - With Upflow, Downflow, & Horizontal Furnaces and Coils (Coil Only Ratings) UNIT COIL 1 HEATING 2 RATED NET MBH STAGE HSPF COP @ 47 CFM 47 OD 17 OD 16 SEER HP COIL ONLY RATINGS 1 1350 43.5 3.42 FC/MC62 2 1800 58 39.0 9.0 3.66 YZF06013(C) 2 1350* 57 38.5 8.6 3.36 1 1350 44 3.52 2 1800 58 39.0 9.0 3.76 2 1350* 57 38.5 8.6 3.44 1. Rated CFM same as for cooling. 2. Heating MBH based on AHRI standards of 70 DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. * Notates Hot Heat Pump performance. These ratings are not AHRI Listed. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. MA Modular Air Handlers use coil only ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. HEATING CAPACITY - With High Efficiency Motor Furnaces UNIT FURNACE COIL 1 HEATING 2 RATED 47 F 17 F HSPF CFM MBH COP KW MBH COP KW STD 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 T*(8,L)V*A12 FC/MC/PC32A 755 24.0 3.76 1.87 15.1 2.52 1.76 8.50 590* 23.8 3.51 1.96 15.1 2.52 1.76 8.50 T*(8,L)V*A12 FC/MC/PC37A 765 24.0 3.90 1.80 15.0 2.62 1.68 8.50 585* 23.8 3.65 1.89 15.0 2.62 1.68 8.50 T*(8,L)V*B12 FC/MC/PC35B 785 24.0 3.80 1.85 15.1 2.52 1.76 8.50 515* 23.8 3.55 1.94 15.1 2.52 1.76 8.50 T*(8,L)V*B12 FC/MC/PC43B 790 24.0 3.92 1.79 15.0 2.64 1.66 9.00 515* 23.8 3.67 1.88 15.0 2.64 1.66 9.00 T*(8,L)V*C16 FC/MC/PC35C 775 23.8 3.80 1.84 15.0 2.54 1.73 8.50 T*(8,L)V*C16 FC/MC/PC43C 770 24.0 3.92 1.79 14.9 2.64 1.65 9.00 645* 23.8 3.67 1.88 14.9 2.64 1.65 9.00 T*(8,L)V*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50 T*(8,L)V*C20 FC/MC/PC43C 740 23.8 3.88 1.80 14.9 2.62 1.67 9.00 T*(8,L)X*A12 FC/MC/PC32A 800 23.8 3.92 1.78 14.9 2.60 1.68 8.50 530* 23.3 3.67 1.87 14.9 2.60 1.68 8.50 YZF02413(C) T*(8,L)X*A12 FC/MC/PC37A 840 24.0 4.08 1.72 14.8 2.74 1.58 9.00 640* 23.8 3.83 1.81 14.8 2.74 1.58 9.00 T*(8,L)X*B12 FC/MC/PC35B 850 24.0 3.98 1.77 14.9 2.62 1.67 8.50 675* 23.8 3.73 1.86 14.9 2.62 1.67 8.50 T*(8,L)X*B12 FC/MC/PC43B 865 24.0 4.10 1.72 14.8 2.74 1.58 9.00 700* 23.8 3.85 1.81 14.8 2.74 1.58 9.00 T*(8,L)X*C16 FC/MC/PC35C 865 24.0 3.98 1.77 14.9 2.62 1.67 8.50 625* 23.8 3.73 1.86 14.9 2.62 1.67 8.50 T*(8,L)X*C16 FC/MC/PC43C 855 24.0 4.10 1.72 14.8 2.74 1.58 9.00 655* 23.8 3.85 1.81 14.8 2.74 1.58 9.00 T*(8,L)X*C20 FC/MC/PC35C 885 24.0 3.92 1.79 15.0 2.60 1.69 8.50 T*(8,L)X*C20 FC/MC/PC43C 815 24.0 4.06 1.73 14.9 2.72 1.61 9.00 T*9(C,V)*B12 FC/MC/PC35B 815 24.0 3.86 1.84 15.1 2.56 1.73 8.50 550* 23.8 3.61 1.93 15.1 2.56 1.73 8.50 T*9(C,V)*B12 FC/MC/PC43B 800 24.0 3.98 1.78 15.0 2.66 1.65 8.50 550* 23.8 3.73 1.87 15.0 2.66 1.65 8.50 T*9(C,V)*C16 FC/MC/PC35C 900 24.0 3.92 1.81 15.1 2.56 1.73 8.50 645* 23.8 3.67 1.90 15.1 2.56 1.73 8.50 T*9(C,V)*C16 FC/MC/PC43C 810 24.0 4.02 1.76 14.9 2.68 1.63 9.00 For notes, see Page 18. Johnson Controls Unitary Products 13
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT YZF02413(C) YZF03013(C) For notes, see Page 18. FURNACE COIL 1 RATED CFM HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 T*9(C,V)*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50 T*9(C,V)*C20 FC/MC/PC43C 890 24.0 4.04 1.77 15.0 2.66 1.65 9.00 T*9V*A10 FC/MC/PC32A 785 24.0 3.72 1.91 15.2 2.46 1.81 8.20 580* 23.8 3.52 1.98 14.6 2.36 1.81 8.15 T*9V*A10 FC/MC/PC37A 790 24.0 3.82 1.87 15.3 2.52 1.78 8.20 570* 23.8 3.52 1.98 14.6 2.38 1.80 8.15 T*9X*A10 FC/MC/PC32A 745 24.0 3.72 1.89 15.1 2.46 1.80 8.40 585* 23.8 3.52 1.98 14.6 2.38 1.80 8.35 T*9X*A10 FC/MC/PC37A 740 24.0 3.80 1.87 15.1 2.52 1.76 8.45 580* 23.8 3.62 1.93 14.6 2.42 1.77 8.40 T*9X*B12 FC/MC/PC35B 785 23.8 3.84 1.82 15.0 2.56 1.72 8.50 620* 23.6 3.59 1.91 15.0 2.56 1.72 8.45 T*9X*B12 FC/MC/PC43B 800 24.0 4.02 1.75 15.0 2.66 1.65 9.00 645* 23.6 3.59 1.91 15.0 2.56 1.72 8.80 T*9X*C16 FC/MC/PC35C 765 23.8 3.80 1.84 15.0 2.54 1.73 8.50 610* 23.3 3.55 1.93 15.0 2.54 1.73 8.50 T*9X*C16 FC/MC/PC43C 785 24.0 4.02 1.75 15.0 2.66 1.65 9.00 T*9X*C20 FC/MC/PC35C 825 24.0 3.94 1.78 15.0 2.60 1.69 8.50 T*9X*C20 FC/MC/PC43C 790 24.0 4.00 1.76 15.1 2.64 1.68 9.00 Y*(8,L)C*A12 FC/MC/PC32A 755 24.0 3.76 1.87 15.1 2.52 1.76 8.50 590* 23.8 3.51 1.96 15.1 2.52 1.76 8.50 Y*(8,L)C*A12 FC/MC/PC37A 765 24.0 3.90 1.80 15.0 2.62 1.68 8.50 585* 23.8 3.65 1.89 15.0 2.62 1.68 8.50 Y*(8,L)C*B12 FC/MC/PC35B 785 24.0 3.80 1.85 15.1 2.52 1.76 8.50 515* 23.8 3.55 1.94 15.1 2.52 1.76 8.50 Y*(8,L)C*B12 FC/MC/PC43B 790 24.0 3.92 1.79 15.0 2.64 1.66 9.00 515* 23.8 3.67 1.88 15.0 2.64 1.66 9.00 Y*(8,L)C*C16 FC/MC/PC35C 775 23.8 3.80 1.84 15.0 2.54 1.73 8.50 Y*(8,L)C*C16 FC/MC/PC43C 770 24.0 3.92 1.79 14.9 2.64 1.65 9.00 645* 23.8 3.67 1.88 14.9 2.64 1.65 9.00 Y*(8,L)C*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50 Y*(8,L)C*C20 FC/MC/PC43C 740 23.8 3.88 1.80 14.9 2.62 1.67 9.00 Y*9C*B12 FC/MC/PC35B 815 24.0 3.86 1.84 15.1 2.56 1.73 8.50 550* 23.8 3.61 1.93 15.1 2.56 1.73 8.50 Y*9C*B12 FC/MC/PC43B 800 24.0 3.98 1.78 15.0 2.66 1.65 8.50 550* 23.8 3.73 1.87 15.0 2.66 1.65 8.50 Y*9C*C16 FC/MC/PC35C 900 24.0 3.92 1.81 15.1 2.56 1.73 8.50 645* 23.8 3.67 1.90 15.1 2.56 1.73 8.50 Y*9C*C16 FC/MC/PC43C 810 24.0 4.02 1.76 14.9 2.68 1.63 9.00 Y*9C*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50 Y*9C*C20 FC/MC/PC43C 890 24.0 4.04 1.77 15.0 2.66 1.65 9.00 T*(8,L)V*A12 FC/MC/PC37A 950 29.6 3.86 2.25 19.2 2.70 2.08 9.00 630* 29.1 3.59 2.36 19.2 2.70 2.08 9.00 T*(8,L)V*B12 FC/MC/PC43B 1045 29.8 3.92 2.23 19.2 2.74 2.05 9.00 715* 29.3 3.65 2.34 19.2 2.74 2.05 9.00 T*(8,L)V*C16 FC/MC/PC43C 1035 29.6 4.00 2.17 19.0 2.78 2.00 9.00 695* 29.1 3.73 2.28 19.0 2.78 2.00 9.00 T*(8,L)V*C20 FC/MC/PC43C 1025 29.4 4.04 2.13 18.9 2.80 1.98 9.00 690* 28.9 3.77 2.25 18.9 2.80 1.98 9.00 T*(8,L)X*A12 FC/MC/PC37A 1090 30.0 4.06 2.17 19.2 2.80 2.01 9.00 605* 29.5 3.79 2.28 19.2 2.80 2.01 9.00 T*(8,L)X*B12 FC/MC/PC43B 1090 30.0 4.06 2.17 19.2 2.80 2.01 9.00 660* 29.5 3.79 2.28 19.2 2.80 2.01 9.00 T*(8,L)X*C16 FC/MC/PC43C 955 29.4 3.96 2.18 18.9 2.78 1.99 9.00 710* 28.9 3.69 2.29 18.9 2.78 1.99 9.00 14 Johnson Controls Unitary Products
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT YZF03013(C) YZF03613(C) For notes, see Page 18. FURNACE T*(8,L)X*C20 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C20 T*9X*B12 T*9X*C16 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*B12 Y*9C*C16 Y*9C*C20 T*(8,L)V*C16 T*(8,L)V*C20 T*9(C,V)*D20 T*(8,L)V*C16 T*(8,L)V*C20 T*9(C,V)*D20 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C16 COIL 1 FC/MC/PC43C FC/MC/PC43B FC/MC/PC43C FC/MC/PC43C FC/MC/PC43B FC/MC/PC43C FC/MC/PC37A FC/MC/PC43B FC/MC/PC43C FC/MC/PC43C FC/MC/PC43B FC/MC/PC43C FC/MC/PC43C FC/MC/PC48C FC/MC/PC48C FC/MC/PC48D FC/PC60C FC/PC60C FC/MC/PC60D UC48C UC48C FC/MC/PC48C FC/PC60C UC48C RATED CFM 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 870 29.0 3.86 2.20 18.8 2.76 2.00 9.00 780* 28.5 3.59 2.31 18.8 2.76 2.00 9.00 1035 30.0 3.88 2.27 19.3 2.70 2.09 9.00 670* 29.5 3.61 2.38 19.3 2.70 2.09 9.00 1030 29.8 3.92 2.23 19.2 2.74 2.05 9.00 680* 29.3 3.65 2.34 19.2 2.74 2.05 9.00 995 29.6 3.94 2.20 19.1 2.74 2.04 9.00 675* 29.1 3.67 2.31 19.1 2.74 2.04 9.00 1095 29.8 4.08 2.14 19.2 2.80 2.01 9.00 775* 29.3 3.81 2.25 19.2 2.80 2.01 9.00 1055 29.8 4.10 2.13 19.1 2.82 1.98 9.00 695* 29.3 3.83 2.24 19.1 2.82 1.98 9.00 950 29.6 3.86 2.25 19.2 2.70 2.08 9.00 630* 29.1 3.59 2.36 19.2 2.70 2.08 9.00 1045 29.8 3.92 2.23 19.2 2.74 2.05 9.00 715* 29.3 3.65 2.34 19.2 2.74 2.05 9.00 1035 29.6 4.00 2.17 19.0 2.78 2.00 9.00 695* 29.1 3.73 2.28 19.0 2.78 2.00 9.00 1025 29.4 4.04 2.13 18.9 2.80 1.98 9.00 690* 28.9 3.77 2.25 18.9 2.80 1.98 9.00 1035 30.0 3.88 2.27 19.3 2.70 2.09 9.00 670* 29.5 3.61 2.38 19.3 2.70 2.09 9.00 1030 29.8 3.92 2.23 19.2 2.74 2.05 9.00 680* 29.3 3.65 2.34 19.2 2.74 2.05 9.00 995 29.6 3.94 2.20 19.1 2.74 2.04 9.00 675* 29.1 3.67 2.31 19.1 2.74 2.04 9.00 1195 36.0 3.90 2.72 23.4 2.74 2.50 9.00 1000* 36.0 3.30 3.36 23.4 2.74 2.50 9.00 1150 36.0 3.92 2.71 23.4 2.76 2.48 9.00 1000* 36.0 3.32 3.35 23.4 2.76 2.48 9.00 1240 36.0 3.96 2.69 23.4 2.76 2.48 9.00 1000* 36.0 3.36 3.33 23.4 2.76 2.48 9.00 1185 36.0 4.12 2.59 23.2 2.88 2.36 9.00 1000* 36.0 3.52 3.23 23.2 2.88 2.36 9.00 1215 36.0 4.14 2.59 23.2 2.88 2.36 9.00 1000* 36.0 3.54 3.23 23.2 2.88 2.36 9.00 1225 36.0 4.12 2.62 23.4 2.86 2.40 9.00 1000* 36.0 3.52 3.26 23.4 2.86 2.40 9.00 1210 36.0 4.06 2.63 23.4 2.84 2.41 9.00 1000* 36.0 3.46 3.27 23.4 2.84 2.41 9.00 1155 36.0 4.10 2.60 23.2 2.86 2.38 9.00 1000* 36.0 3.50 3.24 23.2 2.86 2.38 9.00 1195 36.0 4.08 2.61 23.0 2.82 2.39 9.00 1000* 36.0 3.48 3.25 23.0 2.82 2.39 9.00 1215 36.0 4.06 2.63 23.0 2.82 2.39 9.00 1000* 36.0 3.46 3.27 23.0 2.82 2.39 9.00 1185 36.0 3.98 2.65 23.2 2.80 2.43 9.00 1000* 36.0 3.38 3.29 23.2 2.80 2.43 9.00 1190 36.0 4.16 2.55 23.0 2.92 2.31 9.00 1000* 36.0 3.56 3.19 23.0 2.92 2.31 9.00 1185 36.0 4.16 2.55 23.0 2.90 2.32 9.00 1000* 36.0 3.56 3.19 23.0 2.90 2.32 9.00 1190 36.0 4.16 2.55 22.8 2.86 2.34 9.00 1000* 36.0 3.56 3.19 22.8 2.86 2.34 9.00 Johnson Controls Unitary Products 15
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT YZF03613(C) YZF04214(C) For notes, see Page 18. FURNACE COIL 1 RATED CFM HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 T*(8,L)X*C20 FC/MC/PC48C 1270 36.0 4.04 2.63 23.4 2.82 2.43 9.00 1000* 36.0 3.44 3.27 23.4 2.82 2.43 9.00 T*(8,L)X*C20 FC/PC60C 1275 36.6 4.22 2.54 23.2 2.92 2.33 9.00 1000* 36.0 3.62 3.18 23.2 2.92 2.33 9.00 T*(8,L)X*C20 UC48C 1270 36.0 4.16 2.56 23.2 2.90 2.34 9.00 1000* 36.0 3.56 3.20 23.2 2.90 2.34 9.00 T*(8,L)X*C20 1275 36.0 4.16 2.56 23.0 2.86 2.36 9.00 1000* 36.0 3.56 3.20 23.0 2.86 2.36 9.00 T*9X*C16 FC/MC/PC48C 1280 36.0 3.98 2.68 23.4 2.78 2.47 9.00 1000* 36.0 3.38 3.32 23.4 2.78 2.47 9.00 T*9X*C16 FC/PC60C 1315 36.0 4.20 2.57 23.2 2.86 2.38 9.00 1000* 36.0 3.60 3.21 23.2 2.86 2.38 9.00 T*9X*C16 UC48C 1280 36.0 4.10 2.62 23.4 2.86 2.40 9.00 1000* 36.0 3.50 3.26 23.4 2.86 2.40 9.00 T*9X*C16 1300 36.0 4.14 2.59 23.0 2.84 2.37 9.00 1000* 36.0 3.54 3.23 23.0 2.84 2.37 9.00 T*9X*C20 FC/MC/PC48C 1205 36.0 3.92 2.71 23.4 2.74 2.50 9.00 1000* 36.0 3.32 3.35 23.4 2.74 2.50 9.00 T*9X*C20 FC/PC60C 1240 36.0 4.18 2.57 23.2 2.90 2.34 9.00 1000* 36.0 3.58 3.21 23.2 2.90 2.34 9.00 T*9X*C20 UC48C 1205 36.0 4.08 2.61 23.2 2.86 2.38 9.00 1000* 36.0 3.48 3.25 23.2 2.86 2.38 9.00 T*9X*C20 1240 36.0 4.08 2.61 23.0 2.82 2.39 9.00 1000* 36.0 3.48 3.25 23.0 2.82 2.39 9.00 T*9X*D20 FC/MC/PC48D 1240 36.0 4.02 2.65 23.4 2.80 2.45 9.00 1000* 36.0 3.42 3.29 23.4 2.80 2.45 9.00 T*9X*D20 FC/MC/PC60D 1310 36.0 4.28 2.51 23.0 2.92 2.31 9.00 1000* 36.0 3.68 3.15 23.0 2.92 2.31 9.00 T*9X*D20 UC48D 1240 36.0 4.10 2.60 23.2 2.86 2.38 9.00 1000* 36.0 3.50 3.24 23.2 2.86 2.38 9.00 T*9X*D20 UC60D 1310 36.0 4.22 2.53 23.0 2.88 2.34 9.00 1000* 36.0 3.62 3.17 23.0 2.88 2.34 9.00 Y*(8,L)C*C16 FC/MC/PC48C 1195 36.0 3.90 2.72 23.4 2.74 2.50 9.00 1000* 36.0 3.30 3.36 23.4 2.74 2.50 9.00 Y*(8,L)C*C16 FC/PC60C 1185 36.0 4.12 2.59 23.2 2.88 2.36 9.00 1000* 36.0 3.52 3.23 23.2 2.88 2.36 9.00 Y*(8,L)C*C16 UC48C 1210 36.0 4.06 2.63 23.4 2.84 2.41 9.00 1000* 36.0 3.46 3.27 23.4 2.84 2.41 9.00 Y*(8,L)C*C16 1195 36.0 4.08 2.61 23.0 2.82 2.39 9.00 1000* 36.0 3.48 3.25 23.0 2.82 2.39 9.00 Y*(8,L)C*C20 FC/MC/PC48C 1150 36.0 3.92 2.71 23.4 2.76 2.48 9.00 1000* 36.0 3.32 3.35 23.4 2.76 2.48 9.00 Y*(8,L)C*C20 FC/PC60C 1215 36.0 4.14 2.59 23.2 2.88 2.36 9.00 1000* 36.0 3.54 3.23 23.2 2.88 2.36 9.00 Y*(8,L)C*C20 UC48C 1155 36.0 4.10 2.60 23.2 2.86 2.38 9.00 1000* 36.0 3.50 3.24 23.2 2.86 2.38 9.00 Y*(8,L)C*C20 1215 36.0 4.06 2.63 23.0 2.82 2.39 9.00 1000* 36.0 3.46 3.27 23.0 2.82 2.39 9.00 Y*9C*D20 FC/MC/PC48D 1240 36.0 3.96 2.69 23.4 2.76 2.48 9.00 1000* 36.0 3.36 3.33 23.4 2.76 2.48 9.00 Y*9C*D20 FC/MC/PC60D 1225 36.0 4.12 2.62 23.4 2.86 2.40 9.00 1000* 36.0 3.52 3.26 23.4 2.86 2.40 9.00 T*(8,L)V*C16 1420 41.0 4.08 2.94 25.8 2.72 2.78 8.50 T*(8,L)V*C16 FC/PC60C 1185 40.5 3.82 3.11 25.6 2.64 2.84 8.50 1050* 40.0 3.92 2.99 25.4 2.78 2.68 8.98 16 Johnson Controls Unitary Products
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT YZF04214(C) For notes, see Page 18. FURNACE COIL 1 RATED CFM HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 T*(8,L)V*C16 1195 41.0 4.00 3.00 25.4 2.72 2.74 8.50 1050* 40.0 3.92 2.99 25.4 2.78 2.68 8.98 T*(8,L)V*C20 1365 40.5 4.06 2.92 25.8 2.74 2.76 8.50 T*(8,L)V*C20 FC/PC60C 1215 41.0 4.08 2.94 25.8 2.80 2.70 8.50 970* 40.0 3.86 3.04 25.2 2.74 2.69 8.98 T*(8,L)V*C20 1215 41.0 4.00 3.00 25.4 2.72 2.74 8.50 970* 40.0 3.86 3.04 25.2 2.74 2.69 8.98 T*(8,L)X*C16 1360 40.5 4.14 2.87 25.6 2.78 2.70 9.00 T*(8,L)X*C16 FC/PC60C 1190 40.5 3.86 3.07 25.4 2.66 2.80 8.50 1115* 40.5 4.00 2.97 25.4 2.80 2.66 8.98 T*(8,L)X*C16 1190 40.5 4.06 2.92 25.2 2.78 2.66 9.00 1115* 39.5 3.88 2.78 24.9 2.88 2.60 8.50 T*(8,L)X*C20 1485 40.5 4.22 2.81 25.6 2.80 2.68 9.00 T*(8,L)X*C20 FC/PC60C 1275 41.0 4.16 2.89 25.6 2.82 2.66 8.50 895* 39.5 3.74 3.09 25.0 2.72 2.69 8.98 T*(8,L)X*C20 1275 40.5 4.08 2.91 25.2 2.76 2.68 8.50 895* 40.0 3.90 2.80 25.3 2.88 2.60 8.50 T*9(C,V)*C16 1445 41.0 4.00 3.00 26.2 2.68 2.86 8.20 T*9(C,V)*C16 FC/PC60C 1235 41.0 4.02 2.99 26.0 2.74 2.78 8.20 1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48 T*9(C,V)*C16 1235 41.0 3.90 3.08 25.6 2.68 2.80 8.20 1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48 T*9(C,V)*C20 1445 41.0 4.06 2.96 26.0 2.72 2.80 8.20 T*9(C,V)*C20 FC/PC60C 1330 41.5 4.08 2.98 26.0 2.76 2.76 8.20 980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48 T*9(C,V)*C20 1330 41.5 4.02 3.02 25.6 2.70 2.78 8.20 980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48 T*9(C,V)*D20 FC/MC/PC60D 1225 41.0 4.06 2.96 25.8 2.78 2.72 8.50 1075* 40.0 3.94 2.97 25.4 2.76 2.70 8.98 T*9(C,V)*D20 1455 41.0 4.08 2.94 25.8 2.74 2.76 8.20 1235* 40.0 3.96 2.96 25.6 2.74 2.74 8.48 T*9(C,V)*D20 UC60D 1225 41.0 3.96 3.03 25.6 2.70 2.78 8.20 1075* 40.0 3.94 2.97 25.4 2.76 2.70 8.98 T*9X*C16 1460 40.5 4.14 2.87 25.8 2.76 2.74 8.50 T*9X*C16 FC/PC60C 1315 41.0 4.16 2.89 25.8 2.82 2.68 8.50 1080* 40.0 3.96 2.96 25.4 2.78 2.68 8.98 T*9X*C16 1315 41.0 4.08 2.94 25.4 2.76 2.70 8.50 1080* 40.0 3.78 2.80 25.1 2.86 2.64 8.20 T*9X*C20 1460 40.5 4.18 2.84 25.6 2.80 2.68 8.50 T*9X*C20 FC/PC60C 1240 41.0 4.12 2.92 25.6 2.80 2.68 8.50 905* 39.5 3.74 3.09 25.2 2.72 2.71 8.98 T*9X*C20 1240 41.0 4.00 3.00 25.4 2.74 2.72 8.50 905* 40.0 3.82 2.86 25.1 2.84 2.66 8.50 T*9X*D20 FC/MC/PC60D 1310 41.0 4.20 2.86 25.6 2.86 2.62 9.00 945* 39.5 3.84 3.01 25.2 2.76 2.68 8.98 T*9X*D20 1425 40.5 4.18 2.84 25.6 2.78 2.70 8.50 1225* 39.5 4.00 2.89 25.6 2.78 2.70 8.98 T*9X*D20 UC60D 1310 41.0 4.14 2.90 25.2 2.80 2.64 8.50 945* 40.0 3.94 2.76 25.1 2.90 2.59 8.50 Y*(8,L)C*C16 1420 41.0 4.08 2.94 25.8 2.72 2.78 8.50 Y*(8,L)C*C16 FC/PC60C 1185 40.5 3.82 3.11 25.6 2.64 2.84 8.50 1050* 40.0 3.92 2.99 25.4 2.78 2.68 8.98 Y*(8,L)C*C16 1195 41.0 4.00 3.00 25.4 2.72 2.74 8.50 1050* 40.0 3.76 2.86 25.1 2.84 2.66 8.20 Johnson Controls Unitary Products 17
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT YZF04214(C) YZF04813(C) FURNACE COIL 1 HEATING 2 RATED 47 F 17 F HSPF CFM MBH COP KW MBH COP KW STD 16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 Y*(8,L)C*C20 1365 40.5 4.06 2.92 25.8 2.74 2.76 8.50 Y*(8,L)C*C20 FC/PC60C 1215 41.0 4.08 2.94 25.8 2.80 2.70 8.50 970* 40.0 3.86 3.04 25.2 2.74 2.69 8.98 Y*(8,L)C*C20 1215 41.0 4.00 3.00 25.4 2.72 2.74 8.50 970* 40.0 3.80 2.86 25.1 2.84 2.66 8.20 Y*9C*C16 1445 41.0 4.00 3.00 26.2 2.68 2.86 8.20 Y*9C*C16 FC/PC60C 1235 41.0 4.02 2.99 26.0 2.74 2.78 8.20 1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48 Y*9C*C16 1235 41.0 3.90 3.08 25.6 2.68 2.80 8.20 1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48 Y*9C*C20 1445 41.0 4.06 2.96 26.0 2.72 2.80 8.20 Y*9C*C20 FC/PC60C 1330 41.5 4.08 2.98 26.0 2.76 2.76 8.20 980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48 Y*9C*C20 UC60 1330 41.5 4.02 3.02 25.6 2.70 2.78 8.20 980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48 Y*9C*D20 FC/MC/PC60D 1225 41.0 4.06 2.96 25.8 2.78 2.72 8.50 1075* 40.0 3.94 2.97 25.4 2.76 2.70 8.98 Y*9C*D20 1455 41.0 4.08 2.94 25.8 2.74 2.76 8.20 1235* 40.0 3.96 2.96 25.6 2.74 2.74 8.98 Y*9C*D20 1225 41.0 3.96 3.03 25.6 2.70 2.78 8.20 1235* 40.0 3.74 2.89 25.3 2.82 2.68 8.50 T*(8,L)V*C16 1635 48.0 3.86 3.87 34.4 2.72 3.71 9.00 1000* 48.0 3.37 4.33 34.4 2.72 3.71 9.00 T*(8,L)V*C20 1630 48.0 3.88 3.85 34.2 2.74 3.66 9.00 1000* 48.0 3.39 4.31 34.2 2.74 3.66 9.00 T*(8,L)X*C16 1610 48.0 3.90 3.83 34.2 2.76 3.63 9.00 1000* 48.0 3.41 4.29 34.2 2.76 3.63 9.00 T*(8,L)X*C20 1665 48.0 3.84 3.89 33.8 2.70 3.67 9.00 1200* 48.0 3.43 4.29 33.8 2.70 3.67 9.00 T*(8,L)X*C20 1665 48.0 3.92 3.81 34.0 2.76 3.61 9.00 1200* 48.0 3.51 4.21 34.0 2.76 3.61 9.00 T*9(C,V)*C16 1590 48.0 3.84 3.93 34.4 2.72 3.71 9.00 1000* 48.0 3.35 4.39 34.4 2.72 3.71 9.00 T*9X*C20 1595 48.0 3.76 3.94 33.6 2.68 3.67 9.00 1200* 48.0 3.35 4.34 33.6 2.68 3.67 9.00 T*9X*C16 1550 48.0 3.88 3.85 34.2 2.74 3.66 9.00 1000* 48.0 3.39 4.31 34.2 2.74 3.66 9.00 T*9X*C20 1595 48.0 3.92 3.81 34.0 2.76 3.61 9.00 1200* 48.0 3.51 4.21 34.0 2.76 3.61 9.00 T*9X*D20 1610 48.0 3.88 3.85 34.2 2.74 3.66 9.00 1200* 48.0 3.47 4.25 34.2 2.74 3.66 9.00 Y*(8,L)C*C16 1635 48.0 3.86 3.87 34.4 2.72 3.71 9.00 1000* 48.0 3.37 4.33 34.4 2.72 3.71 9.00 Y*(8,L)C*C20 1630 48.0 3.88 3.85 34.2 2.74 3.66 9.00 1000* 48.0 3.39 4.31 34.2 2.74 3.66 9.00 Y*9C*C16 1590 48.0 3.84 3.93 34.4 2.72 3.71 9.00 1000* 48.0 3.35 4.39 34.4 2.72 3.71 9.00 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. Heating MBH based on AHRI standards of 70 F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. 3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. * Notates Hot Heat Pump performance. These ratings are not AHRI Listed. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. 18 Johnson Controls Unitary Products