eft Hand Door H ight Hand everse H ight Hand Door H eft Hand everse H ight Hand Door H eft Hand everse H egular rm ee Page Top Jamb ee Page 5 Parallel rm ee Pages & Instructions CUTION n Incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These installation instructions should be followed to avoid the possibility of misapplication or CUTION misadjustment. "D" suffix (Delayed ction) and "M" suffix (Metal Cover) are optional features. NOTE: For special applications a separate door and frame preparation template is packed with these instructions. Use this instruction sheet for installation sequence and closer adjustments only. Doors should be hung on ball bearing or antifriction hinges. Door must swing freely. separate door stop is recoended. Door and frame must be properly reinforced. djust closing time speed between and 7 seconds from 90 to 0. Greater closing times may be required for elderly or handicapped. These door closers should NOT be installed on the exposed side (weather side) of exterior doors. 7700/770 eries Non Hold Open Models 7700 J7700 J7700 P7700 J770 egular rm ee Page Top Jamb ee Page 5 ight Hand Door H eft Hand everse H Parallel rm ee Pages & eft Hand Door H ight Hand everse H eft Hand Door H ight Hand everse H Metal Wood elf Drilling crews Wood and Metal (Optional) leeve Nut and olt #7 1/0 /16" Pilot Hole equired For Wood drill /16" hole for Wood drill 7/ Machine crews #7 Drill, 1/0 Tap Drill 9/ thru from Closer ide /8 Drill other side Thru olt and Groet Nut Drill 9/ thru from Closer ide /8 Drill other ide Cover crews hoe and djusting od hoe D Option Closer (5 Valves) Tube Plastic Cover (tandard) Cover crews Forearm crew rm ssembly For P7500 arm installations only tandard Closer ( Valves) Closer ssembly Power djustment Nut Metal Cover (Optional) Main rm and lide Unit ssembly Main rm crew Plate crews No. 1618 offit Plate Copyright 001, 01 Yale ecurity Inc., an Group company. ll rights reserved. 1 80977110100 (01)
7700/770 eries Non Hold Open Door Closers egular rm Parts 1 Mark and Drill Holes 55/8 (1) 1/ (.5) / (19) Covers Optional equence /8 (60.) C Hinge or Pivot (101.6) 6/ (171.5) /8 (111.1) 1/8 (1.) 11/8 (9) / (19) 11/ (8) F atch D Y 90 E C Install closer with power adjustment nut toward lock edge of door. Valves UP for right hand door Valves DOWN for left hand door. Opening To 100 101 to 10 11 to 150 151 to 180 Dimension 75/8 65/8 5/8 1/8 Power djustment (If Necessary) 19 168 117 105 6 ackcheck 7 Optional Cover 8 pring Power djustment Nut with the proper preload spring is not preloaded. DO NOT use a power drill or driver to turn adjustment nut. This will damage closer and void warranty. ight Hand hown Inches () 7786 ackplate Mounting Hole Only /D valve tandard Closer 5 valve Delayed ction Closer Don't completely close valve () Copyright 001, 01 Yale ecurity Inc., an Group company. ll rights reserved. 80977110100 (01)
7700/770 eries Non Hold Open Door Closers Parallel rm Parts 1 Cover Mark and Drill Holes 1/ (1) Optional /8 (10) (50.8) / (69.9) 7/16 (11.1) equence ee teps 10 for details. E D C G C Hinge or Pivot 1/ (101.6) 1/ (.9) / (10.7) (6) 1/ 5/16 (6) (7.9) 11/8 (9) /8 (60.) Close Valves 11/ F eft Hand hown Inches () Door/Wall/Hardware/Jamb * conditions permitting Opening To 100 101 to 10 11 to 150 151 to 180 6/ (171.5) Dimension 8/ 71/ 61/ 51/ 7788 Dropplate Mounting Hole Only Install Closer and racket 5 Preload Closer 6 18 159 1 Dimension 91/ 7/ 6/ 5/ 5 197 171 16 tandard Place rm on pindle atch o ta te Delayed ction emove rm from pindle Copyright 001, 01 Yale ecurity Inc., an Group company. ll rights reserved. 80977110100 (01)
7700/770 eries Non Hold Open Door Closers Parallel rm ight Hand Door or eft Hand Door Y Y Flat 7 Flat Open Valves Delayed ction Don't remove valves atch tandard 8 ssemble rm 9 rm crew 10 11/ (8) Power djustment (If Necessary) pring Power djustment Nut 11 with the proper preload spring is not preloaded. DO NOT use a power drill or driver to turn adjustment nut. This will damage closer and void warranty. /D valve tandard Closer 1 valve Delayed ction Closer atch 1 ackcheck 1 Optional Cover 15 () Don't completely close valve Copyright 001, 01 Yale ecurity Inc., an Group company. ll rights reserved. 80977110100 (01)
Y 7700/770 eries Non Hold Open Door Closers Top Jamb rm Parts 1 Mark and Drill Holes /8 (60.) (101.6) 6/ (171.5) /8 (111.1) 1/8 (1.) / (19) Covers Optional equence atch () C D Install closer with power adjustment nut toward lock edge of door. Valves UP for left hand door Valves DOWN for right hand door. E 90 6 F ackcheck () * /8 (10) C Hinge or Pivot eft Hand hown Inches () 7786 ackplate Mounting Hole Only Power djustment (If Necessary) pring Power djustment Nut 55/8 (1) * lways use frame or transom rabbet as reference plane, not bottom of stop. with the proper preload spring is not preloaded. DO NOT use a power drill or driver to turn adjustment nut. This will damage closer and void warranty. 7 1/ (.5) 5 Optional Cover () *15/8 (1) Opening To 100 101 to 10 11 to 150 151 to 180 * 11/8 (9) Dimension 75/8 65/8 5/8 1/8 /D valve tandard Closer 19 168 117 105 valve Delayed ction Closer 8 Don't completely close valve Copyright 001, 01 Yale ecurity Inc., an Group company. ll rights reserved. 5 80977110100 (01)
7700/770 eries djustments atch () ackcheck () /D valve tandard Closer (hown) valve Delayed ction Closer 70 (Use 1/8" Hex Wrench for these djustments) 10 COED Delayed ction /D valve (Note Delayed ction closers contain 5 valves) Power djustment rm Placement in hoe /D Valve (Use 1/8 Hex Wrench for this djustment) pring Power djustment Nut with the proper preload spring is not preloaded. DO NOT use a power drill or driver to turn adjustment nut. This will damage closer and void warranty. 71/ % stronger or or 71/ % weaker Copyright 001, 01 Yale ecurity Inc., an Group company. ll rights reserved. 6 000 Highway 7 East Monroe, NC 811 Tel: (877) 9755 Fax: (800)80965 www.nortondoorcontrols.com 80977110100 (01)