MISCELLNEOUS INDEX 08/01/11 PGE DTE SERIES DESCRIPTION M-1 08/01/11 Miscellaneous Index M-2 04/16/96 M01 Tooling all M-3 04/16/96 M02 Scrap Chute Hook and Retainer racket M-4 01/03/95 M03 Scrap Chute Chain Hooks M-5 01/03/95 M04, M05 & M15 Scrap Chute Retainer rackets M-6 01/03/95 M06 & M16 Scrap Chute Storage/Hinge rackets M-7 01/03/95 M07 Scrap Chute Hinge & Pins M-8 12/15/00 M08 & M09 Rectangular Key M-9 12/15/00 M Stop locks M- 08/23/06 Discontinued Flange Stripper with Coil Spring M-11 12/15/00 M12 Flange Stripper with Gas Spring M-12 08/23/06 Discontinued Flange Stripper ssembly M-13 12/15/00 M13 Flange Stripper sm - Locating Cone Unit M-14 08/23/06 Discontinued Flange Stripper sm - Guide Shaft M-15 08/23/06 Discontinued Flange Stripper sm - ushing lock M-16 08/23/06 Discontinued Flange Stripper sm - Retainer & Guide lock M-17 /19/01 M17 Stock Crowder M-18 08/01/11 Discontinued lank Support M-19 /07/05 M190001 Scrap Flipper M-20 08/23/06 M200001 Scrap Chute racket M-21 06/07/07 M2075-21 18 MM lank Sensor (M21 Series) M-22 09/16/08 M22 SERIES Flange Stipper ir ctivated M-23 /20/ M23 Lift Rail ssembly M-24 /20/ M23 Lift Rail Cable Stud & Mounting Plate M- /20/ M23 Lift Rail Cable Stud Mounting racket & umper Plate M-26 /20/ M23 Lift Rail Shock bsorber M-27 08/01/11 M27 lank Support 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M-1
TOOLING LL (M01 SERIES) GLOL STNDRD COMPONENTS 04/16/96 0.005 -- Ø12 ±0.011 Ø6 m6 Ø12 12 ±0.005 22 M011222 NOTES & SPECIFICTIONS: Material, hardened steel 1997 uto/steel Partnership This document is Uncontrolled when printed. M 2
SCRP CHUTE HOOK ND RETINER RCKET (M02 SERIES) GLOL STNDRD COMPONENTS 04/16/96 27 23 6 95 11 73 12 24 FOR M S.H.C.S. (2) HOLES SCRP CHUTE RETINER RCKET M020001 30 6R 6 35 48 2 2 3 SCRP CHUTE HOOK M020002 1997 uto/steel Partnership This document is Uncontrolled when printed. M 3
SCRP CHUTE CHIN HOOKS (M03 SERIES) GLOL STNDRD COMPONENTS 01/03/95 45 28 6.35 R 5 65 FOR M S.H.C.S. (2) HOLES 12.5 VERTICL CHIN HOOK M030001 4.7 6.35 45 28 FOR M S.H.C.S. (2) HOLES 35 R 5 45 4.7 HORIZONTL CHIN HOOK M030002 1997 uto/steel Partnership This document is Uncontrolled when printed. M 4
SCRP CHUTE RETINER RCKETS GLOL STNDRD COMPONENTS (M04, M05 & M15 SERIES) 01/03/95 28.5 15 11 DI. (2) HOLES ROUND MECHNICL TUING 5/8" O.D. x 7/16" I.D. 15 37 57 60 4.7 STU RETINER RCKET M040001 57 37 11 DI. (2) HOLES 28.5 57 37 9.5 11 DI. (2) HOLES 28.5 76 40 8 ROUND MECHNICL TUING 5/8" O.D. x 7/16" I.D. 65 24 8 ROUND MECHNICL 15 TUING 5/8" O.D. x 7/16" I.D. STEEL NGLE (5" x 3" x 3/8") "" 15 "" (140 MIN., IN INCREMENTS OF ) 38 9.5 9.5 VERTICL RETINER RCKET M0060 60 M0070 70 M0080 80 M0090 90 M00 0 M01 1 M0120 120 M0130 130 9.5 VERTICL EXTD. RETINER RCKET M1XXX XXX = LENGTH EX: M1140 = 140 LENGTH 1997 uto/steel Partnership This document is Uncontrolled when printed. M 5
SCRP CHUTE STORGE/ HINGE RCKETS GLOL STNDRD COMPONENTS (M06 & M16 SERIES) 01/03/95 11 DI. (2) HOLES ROUND MECHNICL TUING 5/8" O.D. x 7/16" I.D. 57 37 63 11 DI. (2) HOLES ROUND MECHNICL TUING 5/8" O.D. x 7/16" I.D. 9.5 76 40 3 57 37 24 63 65 3 15 STEEL NGLE (5" x 3" x.38") "" 15 "" (140 MIN., IN INCREMENTS OF ) 9.5 38 9.5 HORIZONTL STORGE OR HINGE RCKET M060060 60 M060070 70 M060080 80 M060090 90 M0600 0 M0601 1 M060120 120 M060130 130 9.5 HORIZONTL EXTENDED STORGE OR HINGE RCKET M160XXX XXX = LENGTH EX: M160140 = 140 LENGTH 1997 uto/steel Partnership This document is Uncontrolled when printed. M 6
SCRP CHUTE HINGE & PINS GLOL STNDRD COMPONENTS (M07 SERIES) 01/03/95 144 35 74 4.7 55 4.7 35 4 35 5R 40 MUST E 40 IN LINE ROUND MECHNICL TUING 5/8" O.D. x 7/16" I.D. DUL HINGE M070001 3.5 DRILL, (2) HOLES (FOR 3.2 X 22 LONG COTTER PIN) SUPPLIED WITH HINGE PIN 63 ROUND MECHNICL TUING 5/8" O.D. x 7/16" I.D. HINGE OR PIN GUIDE Ø9.5 M070002 5 5 HINGE PIN 165 M070003 75 9.5 TO SUIT R STORGE PIN M070004 5 3.5 DRILL HOLE (FOR 3.2 X 22 LONG COTTER PIN) 1997 uto/steel Partnership This document is Uncontrolled when printed. M 7
KEY - RECTNGULR (M08 & M09 SERIES) GLOL STNDRD COMPONENTS 12/15/00 HED HEIGHT +0.4 STYLE L H M082008 M082205 M082208 M0822 M082405 M082408 M0824 M0805 M0808 M08 M0830 M0832 L ± 0.3 80 80 0 80 0 80 0 0 0 (h9) X H 20 X 20 22 X 14 X 20 X 30 X 30 32 X SOCKET HED CP SCR. REQ'D M8 X M8 X 20 M X M X 30 STYLE L H M092008 M092012 M093205 M093208 M0932 L ± 0.3 80 1 80 0 (h9) X H 20 X 12 32 X 18 SOCKET HED CP SCR. REQ'D M X 30 MTERIL: STEEL MIN 340 MPa REK LL CORNERS 1997 uto/steel Partnership This document is Uncontrolled when printed. M 8
STOP LOCKS (M SERIES) GLOL STNDRD COMPONENTS 12/15/00 PERMNENTLY MRK PRT NUMER ND MNUFCTURER S RND ON SIDE OF STOP LOCK, NOT ON FLT. ± 2.0 O MIN FLT PROVIDED FOR CONSTRUCTION SOURCE TO DIE STMP DIE DETIL NO. 6mm WIDE X 1.mm ±0.0 DEEP SLOT IN STOP LOCKS ONLY. 1.5 X 45 C 1.6 E ± 0.1 D 1.6 Ø ØC ØD ØE M0403 M0605 M06 M0805 M05 40 30 18 11.0 20 60 20 13.5 20 60 0 20 13.5 24 80 20 13.5 20 0 20 13.5 20 MTERIL: STEEL 1997 uto/steel Partnership This document is Uncontrolled when printed. M 9
FLNGE STRIPPER WITH COIL SPRING (M11 SERIES) G L O L S T N D R D C O M P O N E N T S 08/23/06 O11 HOLE FREE LENGTH 230 30 PRELOD ±0.2 26 8 36.5 O9 (6 HOLES) 215 0 ±0.2 40 32 18 O45 60 DISCONTINUED MX TRVEL 149 SOLID HEIGHT 120 20 13 51 TRVEL 297N 30 900N N THEOR. SIGHT CHECK FOR MXIMUM STROKE 60 TRVEL 1 38 ±0.2 76 IDENTIFICTION 0 MII0000 IR VENT IDENTIFICTION: ECH PRT MUST E PERMNENTLY MRKED WITH THE FULL ORDERING NUMER ND MNUFCTURER S RND. 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M
FLNGE STRIPPER WITH GS SPRING (M12 SERIES) GLOL STNDRD COMPONENTS 12/15/00 O11 HOLE 60 ±0.2 26 8 36.5 32 40 30 18 O9 (6 HOLES) SIGHT CHECK FOR MXIMUM STROKE 20 215 0 ±0.2 O45 60 TRVEL 1 13 38 ±0.2 76 0 MI20000 IDENTIFICTION IR VENT CUTION: USE SELF-CONTINED NITROGEN SPRING WITH MX. 20 R FILLING PRESSURE IDENTIFICTION: ECH PRT MUST E PERMNENTLY MRKED WITH THE FULL ORDERING NUMER ND MNUFCTURER S RND. 1997 uto/steel Partnership This document is Uncontrolled when printed. M 11
FLNGE STRIPPER SSEMLY (M13 SERIES) G L O L S T N D R D C O M P O N E N T S 08/23/06 65 32 G6 O12 30 15 20 30 MI30000 SEE FOLLOWING PGES FOR DETILS 32 60 FOR M SOC. HD. SCR. 60 (4) HOLES 120 90 80 12 60 +0.00 0.05 75 1 FOR M12 SOC. HD. SCR. (2) HOLES FLNGE STRIPPER SSEMLY CONSISTS OF: DISCONTINUED C LOCTING CONE UNIT M1300 GUIDE SHFT M130020 USHING LOCK M130030 D RETINER ND GUIDE LOCK M130040 E 55 USHING G6171 30 D 12.5 E C 35 60 96 48 G6 O12 (2) HOLES TRVEL + 5mm TRVEL O SECTION 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M 12
FLNGE STRIPPER SSEMLY LOCTING CONE UNIT (M13 SERIES) GLOL STNDRD COMPONENTS 12/15/00 6.3 12 35 Ø45 Ø 90 6.3 11mm DRILL THRU FOR 12mm DOWEL 30 ±1 55 ±0.08 65 90 ±1 / / 0.02 SSEMLED LOCTING CONE UNIT SSEMLY MI30011 MI300 LOCTING CONE CONSISTS OF: UPPER CONE M130011 LOWER CONE M130012 Ø20 Ø14 90 6.3 MTERIL: STEEL FLME HRDEN CROSS-HTCHED RES RC. 56 60 16 30 17.5 6.3 Ø30 Ø MI30012 1997 uto/steel Partnership This document is Uncontrolled when printed. M 13
FLNGE STRIPPER SSEMLY GUIDE SHFT (M13 SERIES) G L O L S T N D R D C O M P O N E N T S 08/23/06 M12 x DEEP ND DIMENSIONS TO E SPECIFIED T TIME OF PURCHSE 30 DISCONTINUED 45 MTERIL: STEEL 5 Ø30 h6 MI30020 XXXXXXXX FLME HRDEN OTTOM RC 56-60 Ø g6 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M 14
FLNGE STRIPPER SSEMLY USHING LOCK (M13 SERIES) G L O L S T N D R D C O M P O N E N T S 08/23/06 M X DEEP (2) PLCES FOR 12mm DOWEL (2) HOLES 120 60 DISCONTINUED DRILL & C'ORE FOR M12 SOC. HD. SCR. (2) HOLES Ø63 30 H7 60 95 12 12 35 75 60 60 +0.00 0.05 MI30030 1 MTERIL: STEEL 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M 15
FLNGE STRIPPER SSEMLY RETINER ND GUIDE LOCK (M13 SERIES) G L O L S T N D R D C O M P O N E N T S 08/23/06 DRILL ND C'ORE FOR M SOC. HD. SCR. (2) PLCES R 38 80 40 40 DISCONTINUED 18 20 20 30 30 MI30040 15.5 18 RETINER & GUIDE LOCK MTERIL: STEEL 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M 16
STOCK CROWDER (M17 SERIES) GLOL STNDRD COMPONENTS /19/01 23 20 "L" 78 REF 630516 CLEVIS 2.00 0006 CYLINDER 317.5 50 RCKET 37.5 20 263 224 175 88 127 44 M170230 M170280 M170330 M170380 L 230 280 330 380 1997 uto/steel Partnership This document is Uncontrolled when printed. M 17
LNK SUPPORT (M18 Series) 08/01/11 36 R 15 76 24 38 15 82 30 4 TYP 20 76 FOR M12mm SOCKET HED CP SCREW 21 REF. DISCONTINUE SPCER TO SUIT M181205 M1811 M183817 1 5 381 115 178 1997 uto/steel Partnership This document is Uncontrolled when printed. M-18
SCRP FLIPPER M190001 /07/05 13.5mm HOLE 2 PLCES 82 6 MIN. 45 12 SE-18 CF 9mm HOLE 8 PLCES 70 TYP MX HEIGHT 457 LTER T DIE CONSTRUCTION SOURCE Ø5. SPRING STEEL 76 12.5 0 (1) M8 CSTLE NUT (1) M8 X 30mm LONG HEX HED OLT (2) F620818 WSHERS (1) COTTER PIN 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M-19
SCRP CHUTE RCKET M200001 G L O L S T N D R D C O M P O N E N T S 08/23/06 *MTERIL: ngle Iron - 8 x x 0 x 30 SCRP CHUTE Ø 11 (3) 30 Ø Ø x 75 DOWEL PIN (3) CHOICES FOR PIN PLCEMENT M 90 65 40 Ø11 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M 20
18MM LNK SENSOR (M21 SERIES) 06/07/07 40 C E NT C E NT. 60 C E NT. 80 40 R 5.5 TYP R 5.5 TYP 35 85 30 40 37 o R 12 Ø 18mm SENSOR NOT SUPPLIED DIM. 8 2 2 2 FSTENERS M x 30 S OC K E T HE D C P S C R E W S F0112 M S E LOC K WS HE R S M S E F LT WS HE R S C ODE M2075 M20 M21 DIM 75 0 1 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M-21
FLNGE STRIPPER IR CTIVTED G L O L S T NDRD COMPO NENT S (M22 SERIES) 09/16/08 140 0 Ø11 THRU (4) PLCES CYLINDER STROKE LIFTER TRVEL L 0 80 40 65 1 130 M220807 M2209 M221615 M222019 80 0 160 200 70 90 1 190 344 364 424 464 20 M12 TP (4) PLCES 60 FOR Ø12 DOWEL (2) PLCES 40 70 LIFTER TRVEL 16 74 140 1 + CYLINDER STROKE Ø49 L IR CYLINDER Ø30 1997 uto/steel Partnership www.naamsstandards.org This document is Uncontrolled when printed. M 22
LIFT RIL SSEMLY (M23 SERIES) /20/ LIFT RIL (REF. ONLY) CLE STUD MOUNTING RCKET D MOUNTING PLTE C E CSTLE NUT CLE STUD SHOCK SORER (ORDER SEPRTELY) (SEE PGE M-26) F JM NUT UMPER PLTE COTTER PIN G M230001 - WITH UNCOTED FSTENERS M230002 - WITH COTED FSTENERS DET. QUN. NME / SPECIFICTION PGE REF. 2 CLE STUD M2300 M-24 1 UMPER PLTE M230011 M- C 1 MOUNTING PLTE M230012 M-24 D 1 CLE STUD MOUNTING RCKET M230013 M- E 4 CSTLE NUT F922430 (UNCOTED) --- F922430 (COTED) F 4 JM NUT F472243 (UNCOTED) F-17 F472243 (COTED) G 4 COTTER PIN F930 --- 1997 uto/steel Partnership This document is Uncontrolled when printed. M-23
LIFTER RIL CLE STUD & MOUNTING PLTE /20/ 559 +12.0-0.0 89 +3-0 180 180 6 X 37 IWRC 89 +3-0 M24 x 3 THREDS Ø.0 ROD +0.0-0.3 Ø.0 ROD +0.0-0.3 M24 x 3 THREDS CLE STUD M2300 M16 x 2-6H (4) PLCES Ø 115 THROUGH 0 20 33 1 217 230 0 0 17.5 55.63 82.5 111. 147.5 165 Ø 17.5 THROUGH (4) PLCES 111. 55.63 3 x 45 (4) PLCES Ø THROUGH (4) PLCES +0.5-0 MOUNTING PLTE M230012 1997 uto/steel Partnership This document is Uncontrolled when printed. M-24
LIFT RIL CLE STUD MOUNTING RCKET & UMPER PLTE /20/ 0 127 +0-7 0 76 +4-0 12 +1-0 184 33 Ø 26 THROUGH HOLE (2 PLCES) CLE STUD MOUNTING RCKET M230013 0 Ø26 THROUGH (2) PLCES 0 45 65 90 33 217 0 +1-0 UMPER PLTE M230011 1997 uto/steel Partnership This document is Uncontrolled when printed. M-
LIFTER RIL SHOCK SORER (M230021) /20/ Shock absorber unit to be supplied with mount attached. Energy dissipation 3520 N-m/cycle minimum. 70 111.3 55.7 140 111.3 140 Ø 17 ±0.5 C MX. DIM. 114.3 88.1 C.4 MIN. DIM. 8 70 19.1 312.7 +3.3-0.0.8 STROKE SHOCK SORER 1997 uto/steel Partnership This document is Uncontrolled when printed. M-26
LNK SUPPORT (M27 SERIES) 08/01/11 R R6.75 TYP 15 76 38 24 15 TYP 14 36 76 54 82 30 21 REF. 70 NOTES ND SPECIFICTIONS: MTERIL: STEEL (mm) (mm) M271205 1 M2711 5 115 M273817 381 178 1997 uto/steel Partnership This document is Uncontrolled when printed. M-27