19 Stand Alone Cabinet with Radio Frequency Protection www.apw.eu.com
Overview Material specification Frame: Steel 2.0 mm Panel mounting angles and reducing channels: Steel 2.0 mm Panel mount supports: Steel 1.5 mm Side panels: Steel 1.5 mm Top cover: Steel 1.2 mm Doors: Steel 1.5 mm Glass: Twin glass 3 mm thick with thin wire mesh inside VERAK EMC load capacity: 1.000 Kg Standards IEC 60297: DIN 41494: EN 60950: VDE 0100: Dimensions of mechanical structures of the 482.6 mm (19 ) series Basic specification for the 19 construction systems European safety standard for information technology equipment Installation and Set up of current systems and earthing Colour specification Standard VERAK EMC RAL 7035 Side panels RAL 7037 Top cover, front and rear doors ZINC PLATED Cabinet frame, panel mount supports and 19 panel mounting angles Dimensions Floor version Depth: 600-800 - 1000 mm Optional RAL 7016 Top cover, front and rear doors, side panels RAL 9005 Cabinet frame, panel mount supports and 19 panel mounting angles ZINC PLATED Cabinet frame, panel mount supports and 19 panel mounting angles Width: 600-800 mm 27U 37U 42U 47U
Introduction Introduction to VERAK EMC VERAK EMC is a standard range of stand alone cabinets that protects equipment from radio frequency interference enabling electronic systems to comply with the requirements for electromagnetic compatibility. VERAK EMC gives more than 80 db attenuation at 100 MHz and 40 db attenuation at 1 GHz, the highest levels available in a standard product from any manufacturer. The stainless gaskets provides for electrical continuity between panels. They self-secure into slots punched in the EMC screen, making it impossible to remove without a tool. VERAK EMC is an extremely robust cabinet: the 2 mm framework gives exceptional strength/rigidity and therefore provides for a static load capacity of 1000 kg. The sides of the knifeedges integrated in the frame are the contact faces of the EMC fingers, so that the ground integrity is maintained throughout the structure and all removable parts. The front and the rear doors are easily reversible (right or left opening) and are provided with a closing mechanism which includes a seal wedge to prevent the integrity of the sealing system. A swing handle controls a 4-point locking system with central camshaft holding the proper pressure on the fingers for continuity. VERAK EMC is available with steel or glass front or rear door. The EMC panels and the metal door have a double panel consisting of a conducting inner layer and an external painted one. The EMC glass door, in particular, is equipped with a thin metal mesh enclosed between two sheets of 3 mm glass to maintain ground continuity and to allow the visual inspection of the equipment without compromising the EMC performance. The cables can be brought into the rack from the bottom and through 10U high recessed cable entry panel, fitted above or below shortened front or rear doors. Recessed panels ensure that connectors do not protrude outside the overall footprint of the enclosure and removable flat gland plates make punching and drilling an easy job. All of these features ensure that the connectors are kept internally the overall cabinet dimensions while the flat removable cabinet bottom plates allow practicing the required holes and cable entry in a smooth way, without compromising the EMC performance. VERAK EMC cabinets can be fitted with solid top covers and plain or vented bases. The ventilated covers allow natural or forced convection cooling without reducing the enclosure s EMC performance. Other solutions are available: for example integrated forced cooling fan trays that can be mounted externally to the protected area. Standard fan tray includes 4 or 6 fans. VERAK EMC modern soft line design, slightly curved styling is equally at home in the office, the communications room or on the factory floor. Its two tone grey color scheme is neutral, blending with most modern decors, making VERAK EMC the ideal choice for both heavy industrial, electronics and telecoms applications. Key Features: VERAK EMC High RFI (Radio Frequency Interference) attenuation Ideal for telecomunication, protected datas transmition and industrial Exceptional strength allows a maximum static load capacity of 1.000 Kg Secure four point door locking system User friendly multiple entry access points (rear and bottom) 4 standard height options 27U, 37U, 42U and 47U 3 depth options: 600 mm, 800 and 1000 mm 2 width options: 600 mm and 800 mm Shielded glass door or solid steel and removable side panels Shortened steel rear door with 10U cable access panel EMC screens at top and bottom ventilated or plain Standard front and rear adjustable 19 panel mounting angles Wide range of application specific accessories Supplied fully assembled and configured with accessories Castors with 65 Kg or 115 Kg load rate as optional Additional bay version settled for bayed cabinet Designed to mount the earth continuity kit compliant to EN 60950 norms Network Rail UK VERAK EMC Certificate of Acceptance 3 www.apw.eu.com Tel: +39 011 7725024
Technical specifications Measurements in mm H CENTRE LINE FOR FEET & BOLT DOWN HOLES OPENING L F DIM WIDTH BETWEEN VERTICALS OPENING M D DIM RACK WIDTH J BOLT DOWN HOLES K FEET CENTRES E RACK DEPTH 97.9 467.0 G DIM WIDTH BETWEEN VERTICALS 4.2 STANDDARD TOP COVER 451.0 30.0 VENTED TOP COVER 465.3 A DIMENSION = B U HEIGHTS RACK WIDTH C DIMENSION = TOTAL RACK HEIGHT 20.0 GLAND PLATE OPENING 451.0 SIDE 59.7 FRONT Rack dimensions A B C D E F G H J K L M 27U x 600 x 600 1201.8 27 1311.8 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 27U x 600 x 800 1201.8 27 1311.8 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 27U x 800 x 600 1201.8 27 1311.8 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 563.8 27U x 800 x 800 1201.8 27 1311.8 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 563.8 37U x 600 x 600 1646.3 37 1756.3 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 37U x 600 x 800 1646.3 37 1756.3 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 37U x 800 x 600 1646.3 37 1756.3 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 563.8 37U x 800 x 800 1646.3 37 1756.3 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 563.8 42U x 600 x 600 1868.5 42 1978.5 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 42U x 600 x 800 1868.5 42 1978.5 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 42U x 800 x 600 1868.5 42 1978.5 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 563.8 42U x 800 x 800 1868.5 42 1978.5 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 563.8 42U x 800 x 1000 1868.5 42 1978.5 797.6 978.0 690.0 740.0 858.0 580.0 650.0 693.4 563.8 47U x 600 x 600 2090.8 47 2205.0 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 47U x 600 x 800 2090.8 47 2205.0 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 47U x 800 x 600 2090.8 47 2205.0 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 363.8 47U x 800 x 800 2090.8 47 2205.0 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 363.8
Primary Configuration Ready to use Primary cabinet builds The VERAK Primary is a ready to use configured cabinet, one order code gives you a complete Primary enclosure ideal for housing active equipment, electronics and computer servers. It can also be used as a starting base in order to create your own unique configured enclosure by adding additional accessories. 5 Contents of kit Qty Corners verticals 4 End frames 2 19 panel mounting angles 4 Reducing cable channels (only 800 mm wide) 4 Panel mount support kit of 2 2 / 3 Side panels 2 Top cover (vented or plain) 1 Top EMC screen (vented or plain) 1 EMC bottom gland plate (vented or plain) 1 Front door, metal or glass 1 Metal rear door, full height or reduced 1 10U cable entry panel 1 Set of adjustable feet 1 Dimensions upon request U Height Overall height mm Internal height mm 12U 649.2 535.0 17U 871.5 757.3 22U 1093.7 979.5 32U 1538.2 1424.0 Addition to height Ventilated top 25.8 mm Heavy duty castors 59.7 mm Adjustable feet Min. 25 Max. 60 mm VERAK PRIMARY RACK BUILD 600 mm width with shortened rear door and 10U cable entry panel VERAK PRIMARY RACK BUILD 800 mm width with complete rear door and side reducing cable channels www.apw.eu.com Tel: +39 011 7725024
Ordering information Ordering information (RAL 7035 / 7037) VERAK EMC confiturations with front metal door Height U x W x D (mm) 27 EMC 600 x 600 + panel10u shortened rear door VT589-790600 37 EMC 600 x 600 + panel10u shortened rear door VT589-790601 37 EMC 600 x 800 + panel10u shortened rear door VT589-790602 42 EMC 600 x 600 + panel10u shortened rear door VT589-790603 42 EMC 600 x 800 + panel10u shortened rear door VT589-790604 42 EMC 800 x 600 + panel10u shortened rear door VT589-790605 42 EMC 800 x 800 + panel10u shortened rear door VT589-790606 42 EMC 800 x 1000 + panel10u shortened rear door VT589-790608 Ordering information (RAL 7016 / 9005) VERAK EMC confiturations with front glass door Height U x W x D (mm) 27 EMC 600 x 800 + panel 10U shortened rear door VT589-790607 VERAK EMC 42U 600x800 open front view VERAK EMC 42U 600x800 rear view
Structural elements Frame The frame comprises of 4 verticals and 2 end frames. Glazed door The EMC glass door, in particular, is equipped with a thin metal mesh enclosed between two sheets of 3 mm glass to maintain ground continuity and to allow the visual inspection of the equipment without compromising the EMC performance. A swing handle controls a 4-point locking system with central camshaft holding the proper pressure on the fingers for continuity. The options of the keyed alike lock, manual or automatic, has to be ordered separately. Shortened steel doors and 10U cable access panel A shortened steel door needs to be ordered with the 10U cable access panel. The cable access panel is recessed by 60mm so cable connectors do not protrude out from the total dimension. The panel can be fitted above or below the door and is easily removed to facilitate the fitting of cable connectors etc. The 1.5 mm steel door comes complete with swing handle which controls a 4-point locking system. The required lock, manual/ automatic or blank needs to be ordered separately. Top / bottom plates To guarantee the EMC performance, top and bottom screeen pla tes must be fitted. Plain - This plain EMC shielding plate which can be fitted at either the top or bottom of the rack can also be utilized as a cable entry panel. Vented - The vented EMC shielding plate, fitted at both the top and bottom, allows air to flow through the rack. A top mounted fan tray can also be fitted under the top to provide a forced air cooling to dissipate the warmth generated by the equipments without interferences with the EMC performance of the cabinet. Metal doors 1.5 mm steel door is complete with swing handle which controls a 4-point locking system. The required lock manual/automatic or blank lock needs to be ordered separately. Side panels Side panels are sold in pairs and are 1.5 mm steel painted in RAL7035. The side panels are fitted using captive screws which allow the units to easily be fitted or removed. Baying bracket kit The kit consists of self-adhesive RFI contact fingers, plus 6 baying brackets. For example: if three racks are to be bayed together to make one suite of racks, one pair of side panels are required (to be used on either end of the suite) and two baying bracket kits. Side vented top cover EMC This top cover allows to create an air to flow from the top. Obviously the top and bottom screen plates must be vented as well. Fully vented top cover EMC A fully vented top is recommended when a fan tray is to be used. Obviously the top and bottom screen plates must be vented as well. Lifting eyes Lifting eyes are sold as a kit of 4. Each has a load capacity up to 320 Kg. Frame Shortned metal door plus 10U cable entry panel Metal door Glazed door Top / bottom plates Top cover Swing handles Both the metal and glass doors have a swing handle fitted as standard. Please note, the locks for the swing handle need to be ordered separately. Keyed alike lock - self locking All locks supplied operate with the same key and the door automatically locks when closed. Keyed alike lock - manual locking All locks supplied operate with the same key. To lock the door the key must be turned. Lock blank The lock blank fills the hole in the swing handle when a lock is not required. It also acts as a spring clip holding the handle into its housing. 7 www.apw.eu.com Tel: +39 011 7725024
Ordering information (some examples RAL7035/7037) Height U 27 37 37 42 W x D 600 x 600 600 x 600 600 x 800 600 x 600 Main structure Frame VT586-565089 VT586-565105 VT586-565106 VT586-565113 Top / bottom plates Top vented screen VT571-565779 VT571-565779 VT571-565780 VT571-565779 Bottom vented screen VT571-565771 VT571-565771 VT571-565772 VT571-565771 Top & bottom plain VT571-565763 VT571-565763 VT571-565764 VT571-565763 Doors w/swing handle with blank cover Glazed door full length VT571-565685 VT571-565687 VT571-565687 VT571-565688 Steel door full length on request VT571-565671 VT571-565671 VT571-565672 10U cable panel VT571-565896 VT571-565896 VT571-565896 VT571-565896 Shortened steel door VT571-565667 VT571-565669 VT571-565669 VT571-565670 For the sides Side panels VT571-565743 VT571-565751 VT571-565752 VT571-565755 EMC baying kit VT571-565875 VT571-565883 VT571-565884 VT571-565887 EMC Top covers Side vented top VT571-565651 VT571-565651 VT571-565652 VT571-565651 Fully vented top VT571-565659 VT571-565659 VT571-565660 VT571-565659 For the bottom of the rack Adjustable feet VT567-565343 VT567-565343 VT567-565343 VT567-565343 Heavy duty castors VT567-565408 VT567-565408 VT567-565408 VT567-565408 Lifting eyes VT567-565489 VT567-565489 VT567-565489 VT567-565489 100 mm plinth corners VT567-565504 VT567-565504 VT567-565504 VT567-565504 Plinth side trim kit VT802-561035 VT802-561035 VT802-561036 VT802-561035 Plinth front and rear trim kit VT802-561038 VT802-561038 VT802-561039 VT802-561038
EMC performances 9 VERAK EMC EMI tests in an anechoic chamber Attenuation over 80dB@100MHz Attenuation over 40dB@1GHz www.apw.eu.com Tel: +39 011 7725024
Handles & locks VERAK handles and locking systems The Primary configurations provide swing handle with manual locking. They are optionally available versions with or without lock. Please order the selected key lock separately Swing handle Swing handle Swing handle with numeric combination lock VT802-563495 VA554-546642 Standard solution - Swing handle with manual locking Lock Keyed alike lock - manual locking (2 keys) Keyed alike lock - self locking (2 keys) Blank cover VA802-563610 VA802-563532 VA802-563534 Swing handle with blank cover Swing handle with automatic locking Swing handle with numeric combination lock
Accessories Thermal kit* 11 600 x 600, 4 fan unit, RAL 7035 VT802-560475 600 x 800, 4 fan unit, RAL 7035 VT802-560476 800 x 600, 4 fan unit, RAL 7035 VT802-560479 800 x 800, 4 fan unit, RAL 7035 VT802-560480 600 x 600, 4 fan unit, RAL 7035 with thermostat VT806-600770 600 x 800, 4 fan unit, RAL 7035 with thermostat VT806-601170 800 x 600, 4 fan unit, RAL 7035 with thermostat on request 800 x 800, 4 fan unit, RAL 7035 with thermostat VT806-601027 600 x 600, 4 fan unit, RAL 9005 with thermostat VT806-600770_9005 600 x 800, 4 fan unit, RAL 9005 with thermostat VT806-600925 800 x 600, 4 fan unit, RAL 9005 with thermostat on request 800 x 800, 4 fan unit, RAL 9005 with thermostat VT806-600868 Thermal kit without and with thermostat *Power cord not included Power cord Cable 1,8 with socket CEE22 VA802-562463 Thermostat and wiring kit Thermostat and wiring kit Thermostat and wiring kit VK385-775843 Fixed shelves kit 19 fixed shelf (600 mm) x 256 VT802-561013 19 fixed shelf (600 mm) x 356 VT802-561014 19 fixed shelf (600 mm) x 456 VT802-561015 19 fixed shelf (600 mm) x 556 VT802-561016 19 fixed shelf max 800 x 256 VT802-561017 19 fixed shelf max 800 x 356 VT802-561018 19 fixed shelf max 800 x 456 VT802-561019 19 fixed shelf max 800 x 556 VT802-561020 Fixed shelves kit Chassis supports Light grey RAL 7035 Zinc plated conductive Chassis support 270 mm in cabinet 400 mm depth min. VT802-561009 VT802-343304 Chassis support 370 mm in cabinet 500 mm depth min. VT802-561561 VT802-343305 Chassis support 470 mm in cabinet 600 mm depth min. VT802-561010 VT802-343306 Chassis support 570 mm in cabinet 700 mm depth min. VT802-561562 VT802-343307 Chassis support 670 mm in cabinet 800 mm depth min. VT802-561011 VT802-343308 Chassis support 770 mm VT802-343186 VT802-343309 Chassis support 870 mm VT802-343187 VT802-343310 Chassis supports kit www.apw.eu.com Tel: +39 011 7725024
Accessories 19 Cantilever shelves 19 cantilever shelf (255 mm deep) VT802-562284 19 cantilever shelf (400 mm deep) VT802-562285 Keyboard shelves 19 x 400 mm keyboard shelf VT802-3635758 19 cantilever shelves 19 Sliding drawing kit 19 2U sliding drawing kit RAL 7035 VT390-787964 Heavy duty sliding shelves 19 x 630 mm heavy duty sliding shelves VT802-3635737 Keyboard shelf 19 Din bar panel kit 19 Din bar panel kit VT390-787140-B 19 Slideing drawing kit 19 Din bar panel kit Heavy duty sliding shelves
Accessories Plinth 13 Plinth Vented plinth 600 x 600 / 600 x 800 rear / front panels VT802-561038 VT806-600649 800 x 600 / 800 x 800 rear / front panels VT802-561039 VT806-601221 600 x 600 / 800 x 600 side panels VT802-561035 VT806-601222 600 x 800 / 800 x 800 side panels VT802-561036 VT806-600650 4 corners kit VT567-565504 Plinth Castors kit Heavy duty castors kit unbraked Heavy duty braked / unbraked castors kit VT567-565408 VT567-565409 Lifting eyes kit Lifting eyes kit VT567-565489 Document holder Document holder A4 size VT802-553081 Castors kit Earth continuity Earth continuity kit Earth continuity kit - supplied assembled VT802-560005 VT567-565900 Lifting eyes kit Document holder www.apw.eu.com Tel: +39 011 7725024
Power Distribution Unit Power Distribution Unit 1U 19 rackmount multistandard aluminum PDU N. sockets A Protection Cable & Plug 6 16A -- 2 mt + Schuko C06ALMST-SI2S 6 16A illuminated switch 2 mt + Schuko C06ALMST-IL2S 7 16A 2P+N MGT 2 mt + Schuko C07ALMST-MT2S 8 16A -- 2 mt + Schuko C08ALMST-SI2S 8 16A illuminated switch 2 mt + Schuko C08ALMST-IL2S Multistandard aluminum PDU 1U 19 rackmount multistandard steel PDU N. sockets A Protection Cable & Plug 6 16A -- 2 mt + Schuko K06MET-SI2S 6 16A illuminated switch 2 mt + Schuko K06MET-IL2S 6 16A 2P+N MGT 2 mt + Schuko K06MET-MT2S 8 16A -- 2 mt + Schuko K08MET-SI2S 8 16A illuminated switch 2 mt + Schuko K08MET-IL2S 9 16A 2P+N MGT 2 mt + Schuko K09MET-MT2S Multistandard steel PDU Multistandard aluminum vertical PDU N. sockets A Protection Cable & Plug 12 16A 2P+N MGT 2 mt + Schuko C12ALMST-MT2S 12 16A illuminated switch 2 mt + Schuko C12ALMST-IL2S 16 16A illuminated switch 2 mt + Schuko C16ALMST-IL2S 16 16A 2P+N MGT 2 mt + Schuko C16ALMST-MT2S Multistandard aluminum vertical PDU 1U 19 rackmount IEC C13 steel PDU N. sockets A Protection Cable & Plug 8 16A illuminated switch 2 mt + Schuko C08MET-16AC13IECIL2S 8 16A 2P+N MGT 2 mt + Schuko C08MET-16AC13IECMT2S 12 16A illuminated switch 2 mt + Schuko C12MET-16AC13IECIL2S 16 16A -- 3 mt + IEC 60309 K16MET-16AC13IECIND3MT 16 32A -- 3 mt + IEC 60309 K16MET-32AC13IECIND3MT IEC C13 8/12 sockets steel PDU IEC C13 16 sockets steel PDU
Configurations Examples 15 VERAK EMC Application: Railway Signalling VERAK EMC 12U 600 x 400 mm RAL 7032 special execution. VERAK EMC Application: Railway Signalling VERAK EMC cabinet 27U 600 x 600 mm version with double front shielded glass door and a double metal rear door VERAK EMC Application: Railway Signalling VERAK EMC cabinet 42U 800 x 1000 mm, versrsion with plinth and feed, RAL 7035. www.apw.eu.com Tel: +39 011 7725024
GOMA ELETTRONICA SpA 10146 Torino - Italy Via Carlo Capelli, 89 Tel: +39 011 7725024 Fax: +39 011 712298 www.gomaelettronica.it All trademarks are the property of their respective owners GOMA ELETTRONICA SpA MKA-CTG-EN 0517