Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high after mounting and is just.mm (.10") wide. Highly reliable contact The contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying. Polarizing guides The header and housing have guides to prevent improper mating. This, the thinnest, 2.mm (.09") pitch connector, is.1mm (.19") in height after mounting and.mm (.10") in width. It is designed to meet the demand for the highdensity connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. Whisker prevention The contact material is treated with a reflow process, and the square post is copper-undercoated and tin/lead-plated for whisker prevention. Easy and effective crimping lthough the contact is compact, it has a long wire strip length, 2.±0.mm (.102"±.01"). This long length is very useful for automatic crimping and when crimping shielded wires. JST 2 Specifications Current rating: C, DC (WG#22) Voltage rating:v C, DC Temperature range:-2 C to + C (including temperature rise in applying electrical current) Contact resistance:initial value/10m Ω max. fter environmental testing/20m Ω max. Insulation resistance:m Ω min. Withstanding voltage:00v C/minute pplicable wire:wg #2 to #22 pplicable PC board thickness:0. to 1.mm(.01" to.0") * Contact JST for details. Standards 0Recognized E09 1Certified LR2012 2 R09 1
Contact.(.22) 2.(.112) 2.0(.01) 1.1(.09) SEH-001T-P0. SEH-00T-P0.L pplicable wire mm 2 WG # Insulation O.D. mm(in.) 0.0 to 0. 0 to 22 1.0 to 1.9(.09 to.0) 0.02 to 0.0 2 to 2 0. to 1.1(.020 to.0) reel 10,000 2.0(.09) Phosphor bronze, tin-plated 1.(.0) Note: 1. Contact JST for gold-plated contacts. 2. SEH-00T-P0.L is not TÜV approved. Housing 2.2 (.09) 2.(.09) JST 1 2 Circuit No.1 0. (.02).(.2).(.10) 0. (.02) 2 9 10 11 12 1 1 1 Dimensions mm(in.) bag EHR- 2 2.(.09).0(.2) EHR-.0(.19) 9.(.) EHR-.(.29) 12.0(.2) EHR- 10.0(.9) 1.(.1) EHR- 12.(.92) 1.0(.9) EHR- 1.0(.91) 19.(.) EHR- 1.(.9) 22.0(.) EHR- 9 20.0(.) 2.(.9) EHR-10 22.(.) 2.0(1.0) EHR-11 2.0(.9) 29.(1.11) EHR-12 2.(1.0) 2.0(1.20) EHR-1 0.0(1.11).(1.) EHR-1 2.(1.20).0(1.) EHR-1.0(1.) 9.(1.) Material Nylon, UL9V-0, natural (white) <For reference> s the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. EHR-2-oo- K black R red TR tomato red E blue Y yellow L lemon yellow M green O orange N brown PL purple PK pink H gray LE light blue FY vivid yellow 2
Shrouded header Top entry type box Side entry type.0(.2).(.10).2(.12).0(.2).(.10) ( to 1 circuits) Circuit No.1 2. 2. (.09) (.09) Side entry type.0(.1) 2. Circuit No.1 (.09) 2. (.09) 0. (.02) 2.(.09) 1.(.0) Circuit No.1 0. (.02) 0. (.02).2(.12).1(.201).0(.2).2(.20) 2.2 (.0).(.10).2(.1) 1.(.0).2 (.12).(.2) 2 9 10 11 12 1 1 1 2-EH- -EH- -EH- -EH- -EH- -EH- -EH- 9-EH- 10-EH- 11-EH- 12-EH- 1-EH- 1-EH- 1-EH- S 2-EH S -EH S -EH S -EH S -EH S -EH S -EH S 9-EH S10-EH S11-EH S12-EH S1-EH S1-EH S1-EH 2.(.09).0(.19).(.29) 10.0(.9) 12.(.92) 1.0(.91) 1.(.9) 20.0(.) 22.(.) 2.0(.9) 2.(1.0) 0.0(1.11) 2.(1.20).0(1.).(.29) 10.0(.9) 12.(.92) 1.0(.91) 1.(.9) 20.0(.) 22.(.) 2.0(.9) 2.(1.0) 0.0(1.11) 2.(1.20).0(1.).(1.) 0.0(1.) Post: rass, copper-undercoated, tin/lead plated Wafer: Nylon, UL9V-0, natural (white) Note: 1. lso available and identified as model xx-eh is a top entry type having a post extension length of.0mm(.1") 2. Top entry type headers are not TÜV approved. The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors. Top entry type Dimensions mm.(in) Top entry Side entry (2 circuits).(.10) type type <For reference> s the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. <Top entry type> ex. 2-EH--oo- K black R red E blue Y yellow M green <Side entry type> ex. S2-EH-oo- K black R red TR tomato red E blue Y yellow L lemon yellow M green O orange N brown P purple PK pink H gray LE light blue FY vivid yellow PC board layout (viewed from soldering side) and ssembly layout Top entry type Side entry type 2.±0.0 (.09±.002) 2. (.09)min. 2.2 (.0)min. 0.9 + 0 0.1 (.0 +.00 0 )dia.. (.10).(.29) 0.(.02) 2.±0.0 (.09±.002) 1.9 (.0)min.. (.2)min. 0.9 + 0 0.1 (.0 +.00 0 )dia. 10.(.0).2(.2).2 (.1) Note: 1. Tolerances are non-cumulative: ±0.0mm(±.002" ) for all centers. 2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR- are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details.
Shrouded header on radial-tape <Taping specifications conform to EIJ-RC-100 and JIS C00.> The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors. Shrouded headers on radial-tape are not TÜV approved. TS type (2 circuits).(.29) 2.(.09). (.2) [1.0(.09)] 1.(.09).(.21). (.1) 2.2(.0) 0.(.02) dia. 2 Dimensions mm(in.) box 2-EH-TS - - 1,00 -EH-TS.0(.19) 10.0(.9) 1,00 -EH-TS.(.29) 12.(.92) 00 -EH-TS 10.0(.9) 1.0(.91) 00 -EH-TS 12.(.92) 1.(.9) 00 -EH-TS 1.0(.91) 20.0(.) 00 -EH-TS 1.(.9) 22.(.) 00 Pin: rass, copper-undercoated, tin/lead-plated Wafer: Nylon, UL9V-0, natural (white) ( to circuits) <For reference> s the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 2-EH-TS-oo- K black R red E blue Y yellow M green N brown 2.(.09) 2.(.09) 0.(.02) dia.. (.1) 2.2(.0) 1.(.09) [1.0(.09)].(.2) 2.(.110).(.220) 0.(.02) dia. TV type 2.(.09) 2.(.09) 0.(.02).(.2) 2.(.110).(.220). (.1) 2.2(.0) [0.(.02) dia.] [0.(.02) dia.] Dimensions mm(in.) box -EH-TV.0(.19) 10.0(.9) 1,00 -EH-TV.(.29) 12.(.92) 00 -EH-TV 10.0(.9) 1.0(.91) 00 -EH-TV 12.(.92) 1.(.9) 00 -EH-TV 1.0(.91) 20.0(.) 00 -EH-TV 1.(.9) 22.(.) 00 Post: rass, copper-undercoated, tin/lead-plated Wafer: Nylon, UL9V-0, natural (white)
R EH CONNECTOR Taping specifications 2 and circuits: 12.(.) to circuits: 2.(1.000) 20.0(.) 9.0(.) 1.0(.09).0 (.2) 2circuits:.1(.201) to circuits:.(.12) 2circuits: 2.(.09) to circuits:.0(.19) 12.(.).0 (.1)dia. Note: Conforms to JIS C02. Packaging specifications D Distance between the end of the tape and the first connector's center line (either end) H TERMINLS & CONNECTORS Tail tape Lead tape W Package type Distance between folds ox size Flat pack (zigzag folded) 2 indexing holes per fold (0.mm/12") (1xx0mm)12."(W)x1."(D) x1.0"(h) Distance between the end of the tape and the first connector s center line (either end) 19.0mm(.0") PC board layout (viewed from soldering side) and ssembly layout 2.±0.0 (.09±.002) 2. (.09)min.. (.1) 2.2 (.0)min. 0.9 + 0 0.1 (.0 +.00 0 )dia..(.9).(.2) Note: 1. Tolerances are non-cumulative: ±0.0mm(±.002" ) for all centers. 2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR- are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details.
pplicator for the semi-automatic press P-K2N Contact Crimp applicator MKS-L(-10) Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC with safety cover without safety cover with safety cover without safety cover with safety cover SEH-001T-P0. PLMK SEH001-0 PLNC SEH001-0 PLMKLS SEH001-0 PLLSNC SEH001-0 PLSC SEH001-0 SEH-00T-P0.L PLMK SEH00-0 PLNC SEH00-0 PLSC SEH00-0