ILLUSTRATED S LIST MODEL NUMBER ST 0P PRODUCT NUMBER 9 9 0-0 MFG. ID. NUMBER 99000 - Rev.
REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 0 9 9 0.09.009-F NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION -0 GEARBOX AUGER 0-0 IMPELLER STEEL -0 PULLEY IMPELLER SCREW ON 0 9-0 CHUTE DISCHARGE BASE 0-9 BRACKET CORNER DISCHARGE BASE -0 BOLT SHEAR /-0 0 0-00 NUT NYLOCK /-0 9-0 NUT FLANGE NYLOCK /- - BLK 9 9-0 BOLT CARRIAGE WAFER HEAD /- X / BLK 0 0-0 BRACKET BELT KEEPER LOWER 9-0 BRACKET INTERFACE 9-9 BEARING BALL - SCREW HEX HEAD /- X / 9- NUT FLANGE NYLOCK /- 9-0 WASHER IMPELLER PULLEY.00D X.ID X.0THK 0-0 SCREW HEX HEAD /- X. NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 X X DESCRIPTION -0 AUGER HOUSING 0 - SCRAPER BAR 0-0 CARRIAGE BOLT /- X. GR - NUT /- 0.09.0-B DESCRIPTION - AUGER ASSEMBLY 0 LH - AUGER ASSEMBLY 0 RH 0.09.0-B 0.09.09-A DESCRIPTION 9-99 TOOL CLEANOUT 0-00 CLIP CLEANOUT TOOL 9-9 SCREW HEX WASHER - X / NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION -0 PLASTIC RETAINER - AUGER BALL BEARING 9 9-0 SCREW HI-LO /- X.00 - BLK 0- SCREW /-0 X. 0 0-00 NUT /-0 0.09.0-B DESCRIPTION -0 SKID SHOW UHMW 0 9-0 BOLT CARR BLK /- X. 0-0 NUT HEX /- LRG FLG 0..00-D NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION -0 CONSOLE BASE MULTICONT GRAY-MS9 0 0-0 SWITCH GRIP HEATED BLACK 0 0-0 SCREW TA SEMI GIMLE /- 0 X. 9-0 SCREW HEX WASHER HI-LO - X.0 0.0.00-A DESCRIPTION 9-0 HUSQVARNA CONSOLE COVER ASM 9-9 SCREW HI-LO - X / 9-0 CLIP PANEL -0 LIGHT ASM LED HUSQ RH -0 LIGHT ASM LED HUSQ LH -0 WIRE HARNESS LIGHT & GRIP -0 WIRE HARNESS LIGHT JUMPER 0.0.00-C NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION 0-0 LEVER CONTROL DSSST OPP MPP 0-0 CONTROL UNIT ASM LEVER PIVOT 9 0-0 SCREW HEXHD 0- X.0 - GROOVED PIN 00 00- E-RING EXTERNAL 0.0.00-C DESCRIPTION 9-0 LEVER CONTROL SPEED/DEFL -0 LEVER CONTROL CHUTE ROT 9-0 BOLT SHOULDER /-0 9-0 SPRING COMPRESSION 9-0 NUT FL LOCK /-0-0 BRACE SUPPORT SPEED 0-0 WASHER. X. X.09 NYLON / 0.0.00-C DESCRIPTION -0 GRIP HANDLE HEATED -0 SCREW PAN HD TORX /-0 X. 0.0.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 0 9 0 * * * * * DESCRIPTION 0- CHUTE WELDMENT - DEFLECTOR WELDMENT 0- DEFLECTOR SEAL - POP RIVET 0- CHUTE SNOW SHIELD - SHIELD STRAP RETAINER 9-0 CABLE ASM DEFLECTOR - BOWDEN 9-0 PIN CLEVIS / X. 9 0-0 PIN CLEVIS / X. 0-0 HAIRPIN RETAINER * -0 DEFLECTOR SPRING * -0 SHOULDER BOLT /-0 X. * 9-0 NUT /-0 * 0-0 CARRIAGE BOLT /- X. * 9 0-00 NUT /- NOTE: ALL ITEMS MARKED WITH AN * ARE PRO- VIDED IN THE BAG OF ITEMS SHIPPED LOOSE WITH THE PRODUCT 0..00-D NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION 0-0 CABLE INTERLOCK - PIN GROOVED 00 00- E-RING -0 SPRING RETURN 9 9-9 CLIP CABLE BLACK 0.0.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm 9
REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 9 0.0.009-C DESCRIPTION -0 CABLE CONTROL DRIVE -0 CABLE CONTROL AUGER -0 CABLE CONTROL SPEED -0 BOLT SHOULDER / 9 9-9 CLIP CABLE - FASTENER PUSH.0 9-0 PIN CLEVIS / -0 HAIRPIN 9 0-0 PIN CLEVIS / NOTE: All component dimensions given in U.S. inches. inch =. mm 0
REPAIR S CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 0.0.00-D DESCRIPTION 0-0 CABLE ROTATOR ASM 9-0 PIN CLEVIS / X / 0 0- PIN CLEVIS / X / -0 HAIRPIN SOFT ZINC -0 CLIP CONDUIT DOUBLE -0 WASHER 0-0 PIN CLEVIS / X NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S HANDLES SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION -0 UPPER HANDLE 9 9- HANDLE KNOB STD BLACK 90-0 BOLT /- X. CON- CAVE HEAD 0.0.00-E DESCRIPTION -0 LOWER TUBE 00 0- SCREW HEX WASH HD /- X. 0-0 CHUTE ROTATOR SUPPORT ASM 00 0-0 BOLT HEX /- 0.0.00-D NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S DRIVE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 0.0.00-A DESCRIPTION 9-9 WASHER.00-0 BUSHING HEX SHAFT 0-0 GEAR 9T DRIVEN 00 00- RETAINING RING 0-0 AXLE SHAFT SPLIT - RETAINER SPRING ZINC - RIVET RD HD DRILLED / DIA 0-0 AXLE SLEEVE NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S DRIVE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 0 0 0 0 9 9 0.0.00-C NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S DRIVE SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION 99-0 NUT HEX FLANGE LK /- 9-0 SWING PLATE FRICTION PULL 0-0 ROD TIP PLATE -0 SPACER DRIVE 9 - LATCH SPRING 00 00-0 E-RING RETAINER -0 FRICTION DISC COMBO PULLEY -0 BRACKET YOKE WELDMENT 9-0 SPRING TORSION DRIVE 0-0 EXTENSION SPRING 9-0 NUT HEX FLANGE LOCK /- 0-0 BEARING 9/ I.D. -RSNR 0-0 RETAINER RING -RSNR 0-0 WASHER FLAT.9 I.D. X.0 X GA 0-0 PAWL ASM RH 0 0-0 GEAR ASM PLANETARY 0-0 WASHER FLAT. I.D. X.00 X GA - TRUNNION BEARING ASM 9 09 09-0 HUB RUBBER WHEEL 0 0-0 BOLT CARRIAGE /- X. 09 0-0 PLATE RUBBER WHEEL 09-0 RING RUBBER WHEEL -0 E-RING 0-0 ROD PAWL 00 00- E-RING 0-0 SHAFT REDUCTION PWR STR - NUT HEX FLANGE LK /- 0-0 PAWL ASM LH NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 0.0.00-C DESCRIPTION - - 0-0 COMPLETE LCT ENGINE PWHK0DE 0 9-0 FRAME 0-0 ENGINE BOLT /- X.0 DOGPOINT 0 9-0 FRAME COVER -0 SHIFTER BRACKET 0 0-0 SCREW HEX WASHER /-0 X / 0 0-0 WIREFORM SUPPORT CABLE - BOLT HEXHD WASHER /- X. -0 BOLT HEXHD WASHER /- X.00 DESCRIPTION 0-0 LARGE MOUNTING PLATE 0.0.00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 0 0 9 9 0 0.0.00-K DESCRIPTION -0 BELT KEEPER BRACKET 9 - WASHER / X / X GA 0 0 0-00 LOCK WASHER / SPLIT HVY 0- CAPSCREW HEXHD /- X. GR 0 0-00 NUT NYLOCK /- UNC 0 9-9 WASHER FLAT. X.00 X.09-0 PULLEY IDLER.0 WITH SPACER -0 IDLER ARM WELDMENT DRIVE 9 0 0-0 RETURN SPRING IDLER ARM DRIVE 0 0- BOLT HEXHD /- X. DESCRIPTION -0 SHOULDER BOLT /- X. 9-0 PULLEY ASM ENGINE 9- BOLT HEXHD /- GR 0-0 RETURN SPRING IDLER ARM 0- BOLT HEXHD /- X. 0-0 IDLER ARM -0 IDLER BUSHING PIVOT 0 90-0 AUGER BELT HI CRANK 9 99-0 DRIVE BELT HI CRANK 0 0-0 PULLEY IDLER.0 FLANGE- LESS WITH SPACER NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION 0-0 BELT COVER HI CRANK 0-0 CABLE GUIDE 9-0 BOLT HEX WSH THDRL /-0 X 0- PALNUT / IN 0.0.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S WHEELS SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION - WHEEL X.0 NPS LH.00 K - WHEEL X.0 NPS RH.00 K 0..00-B NOTE: All component dimensions given in U.S. inches. inch =. mm 9
REPAIR S BAG OF S SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 9 0 0..00-E DESCRIPTION -0 BOLT /- 0 X. 0 0-00 NUT NYLOCK /-0 9- WRENCH -0 BOLT SHOULDER 9-0 NUT HEX FL /-0 CTR 9 0-0 NUT NYLOCK /- 90-0 BOLT /- X. CONCAVE 9 9- KNOB /- TWO WING 9 0-0 BOLT /- X. 0 9 0-00 NUT SERR FL LOCK /- -0 SPRING DEFLECT CHUTE 9-0 KNOB SOFT TOUCH SLOTTED 9-0 SUPPORT ROTATION CABLE - - 0-0 KIT REPLACEMENT BAG OF S 0..009-B DESCRIPTION 0-9 SAFETY IGNITION KIT NOTE: All component dimensions given in U.S. inches. inch =. mm 0
REPAIR S DECALS SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION 0- DECAL AUGER 9 9- DECAL CHUTE 9 9- DECAL AUGER SAFETY 0- DECAL BELT GUIDE 0..00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S DECALS SNOW THROWER - MODEL ST 0P (99000), PRODUCT 9 9 0-0 DESCRIPTION 9 9- DECAL, AUGER 9 9- DECAL, DANGER, DEFLECTOR 0- DECAL, DANGER 0- DECAL, BELT GUARD - - - OPERATOR S MANUAL, ENGLISH - - - OPERATOR S MANUAL, FRENCH - - - OPERATOR S MANUAL, SPANISH NOTE: All component dimensions given in U.S. inches. inch =. mm
ENGINE, LCT COMPLETE ENGINE-00 9/cc Snow Engines 9999 Options 0 * *Included with part # * 0 0 9 9 9 9 9 0 DECALS 9 0 0 Carburetor Repair Kit 0 9 ILLUSTRATION FOR REFERENCE PURPOSES ONLY 9 9 0 DESCRIPTION 9- CYLINDER HEAD ASSEMBLY - 9CC (INCL. GASKET) 9- PUSH ROD & PLATE KIT (9CC) (INCL. VALVE COVER GSKT) 9-0 VALVE COVER (9/CC) (INCL. GASKET) -0 CYLINDER ASSEMBLY-SNOW 9- PISTON & ROD ASSEMBLY (9CC) -0 CONNECTING ROD ASSEMBLY (9CC) 9- CAMSHAFT - MCR (9CC) -9 FLYWHEEL - ELECTRIC START (-CHARGING MAGNETS) (9CC) DESCRIPTION 9 9- COOLLNG FAN - FLYWHEEL (PLASTIC - 9CC) 0-0 CRANKSHAFT (# ED 9CC SNOW) -0 MUFFLER ASSEMBLY-SNOW -9 FUEL TANK (9CC-SNOW) (.L BLACK W/PLASTIC CAP) 9- FUEL TANK ON/OFF VALVE - GEN II SNOW 9- FUEL TANK CAP - BLACK PLASTIC (VENTED) (SAME AS SKSN00.) -0 CARBURETOR (L) 9CC SNOW) (W/GSKTS & SPACER) -9 IGNITION COIL (CDI) (9- CC) (HI-TEMP) NOTE: All component dimensions given in U.S. inches. inch =. mm
ENGINE, LCT COMPLETE ENGINE-00 DESCRIPTION 0 9- SPARK PLUG (SAME AS SK00.) 9- ON/OFF SWITCH - ROCKER (SAME AS SKSN00.) 9- SHIELD - FLYWHEEL (CC SNOW) - FUEL HOSE KIT (9MM) -9 SPEED CONTROL BRACKET (FIXED) 9-9 GOVERNOR GEAR ASSEMBLY 9- GOVERNOR ARM & LINK KIT (9CC SNOW) 9-0 GOVERNOR ARM PADDLE 9- RECOIL STARTER - BLACK 9CC SNOW 9 9- STARTER CUP - 9CC SNOW 0-0 BLOWER HOUSING - BLACK ES (9CC SNOW) 9- CRANKCASE COVER ASSY (HOFT & -LOW FILLS) 9- OIL SEAL KIT (9CC) -0 ELECTRIC STARTER SWITCH BOX BRACKET - 9CC SNOW 9- SPARK PLUG BOOT - WITH METAL SHIELD (SNOW) 9-0 0V ELECTRIC STARTER (9CC) 9- ENGINE GASKET KIT (9CC) - SMALL BLACK OIL DIPSTICK (PLASTIC) 9- ROCKER ARM KIT (9/CC)(INCL. GASKET) 9 9- CHOKE CONTROL KNOB (GEN II RED) 0 9- NON-REMOVABLE PLASTIC PLUG (9/CC) 9- CDI BOX BRACKET-SNOW 0-0 BREATHER TUBE (9/CC) 9-0 HIGH OIL-FILL TUBE & CAP (NO DIPSTICK) 9- WIRE HARNESS (CC SNOW) 9-9 OIL DRAIN PLUG W/WASHER (9/CC) 0 9-0 HEATER BOX KIT (9CC SNOW) DESCRIPTION 9- SHIELD - CYLINDER (9/CC SNOW) 9- PRIMER BULB WITH HOSE- SNOW (SAME AS SKSN00.) 9- SAFETY SWITCH W/S (SAME AS SKSN00.) 0-9 SET - RED () (SNOW) 99-0 OIL DRAIN TUBE-SNOW (9/CC) 9- CARBURETOR VAPOR SHIELD - CC SNOW - CE COMPLLANT MUFFLER SHIELD (9CC) 9- SHIELD - GOVERNOR LINKAGE -SNOW 9 9- FUEL TANK SKIRT (9CC SNOW) 0-9 CHARGING COIL (0-WATT AC) (9/CC) - FUEL CONTROL KNOB (GEN II SNOW - RED) -99 STARTER GRIP-SNOW (DELUXE) 9-0 TAPPET KIT (9/CC) (SET OF ) 9-0 CARBURETOR MTG STUD KIT () (9CC SNOW) 0 0-0 CARBURETOR REPAIR KIT (9/CC) - RECOIL BOLT KIT (INCL. () MTG BOLTS) 9-0 WOODRUFF FLYWHEEL (-PACK) (XXMM) 0 0-0 CARBURETOR SPACER (9CC) -0 FUEL TANK STRAINER -0 CYLINDER HEAD BOLT KIT () (9-CC) -0 CC COVER BOLT KIT () (9CC) -0 MUFFLER MTG STUD KIT () 9-0 IDLE SPEED CONTROL KNOB 9999-0 HIGH ALTITUDE JET (>,000 FEET)(9CC L CARBURETOR) NOTE: All component dimensions given in U.S. inches. inch =. mm
.. AP/TH