INTERNATIONAL DESIGN GUIDE

INTERNTIONL DESIGN GUIDE

Contents 3 Built-In Refrigeration 30 PRO 48 Refrigeration 35 Integrated Refrigeration 44 ine Storage Features and specifications are subject to change at any time without notice. IMPORTNT NOTE: Throughout this guide, dimensions may vary by ± 3. 71 Sub-Zero arranty

BUILT-IN REFRIGERTION Built-In Refrigeration For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes the builtin line nothing short of revolutionary. KEY FETURES Three distinct design approaches: overlay, flush inset and stainless steel. andle options coordinate with handles of olf cooking products. BUILT-IN MODELS Dual refrigeration; two compressors preserve food s goodness in two sealed compartments. Energy efficient. Internal dispenser model provides ice and chilled water inside the refrigerator. Crisper and deli drawers form a lower-temperature zone for produce and meats. Flip-up grille provides easy access for quick routine maintenance. ll models are Star-K certified. ICBBI-36R ICBBI-36F ICBBI-30U ICBBI-36U ICBBI-36UFD ICBBI-36S ICBBI-42S ICBBI-42SD ICBBI-48S ICBBI-48SID ICBBI-48SD BUILT-IN PRO 48 INTEGRTED INE subzero.com 3

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overall Dimensions LL REFRIGERTOR / LL FREEZER 606 946 914 EIGT DIMENSIONS ± 13 Model ICBBI-36R and ICBBI-36F. 1873 2134 359 102 60 665 606 Overall dimensions are based on stainless steel models. For flush inset applications, add 13 to door clearance dimensions. OVER-ND-UNDER 606 762 EIGT DIMENSIONS ± 13 Model ICBBI-30U. 1289 584 308 2134 102 600 796 60 665 606 4 English

BUILT-IN REFRIGERTION Overall Dimensions OVER-ND-UNDER 606 Model ICBBI-36U. 914 EIGT DIMENSIONS ± 13 1289 584 2134 359 102 600 946 60 665 606 203 914 EIGT DIMENSIONS ± 13 60 Model ICBBI-36UFD. 1289 584 2134 606 495 102 600 665 606 BUILT-IN PRO 48 INTEGRTED INE subzero.com 5

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overall Dimensions SIDE-BY-SIDE 184 914 EIGT DIMENSIONS ± 13 Model ICBBI-36S. 1873 222 2134 102 606 565 60 665 606 191 1067 EIGT DIMENSIONS ± 13 Model ICBBI-42S and ICBBI-42SD. 1873 264 2134 102 606 668 60 665 606 6 English

BUILT-IN REFRIGERTION Overall Dimensions SIDE-BY-SIDE 213 1219 EIGT DIMENSIONS ± 13 1873 295 2134 Model ICBBI-48S, ICBBI-48SID and ICBBI-48SD. 102 606 762 60 665 606 Specifications BUILT-IN MODELS INTERIOR CPCITY LL REFRIGERTOR / LL FREEZER R (L) F (L) ICBBI-36R 613 ICBBI-36F 612 OVER-ND-UNDER R (L) F (L) ICBBI-30U 311 111 ICBBI-36U 367 143 ICBBI-36UFD 357 144 SIDE-BY-SIDE R (L) F (L) ICBBI-36S 328 225 ICBBI-42S 430 220 ICBBI-42SD 408 194 ICBBI-48S 500 264 ICBBI-48SID 491 244 ICBBI-48SD 478 244 BUILT-IN PRO 48 INTEGRTED INE subzero.com 7

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions STNDRD INSTLLTION SIDE VIE 2127 OPENING EIGT NOTE: Shaded line represents profile of unit. OPENING IDT 610 OPENING DEPT MODEL ICBBI-36R, ICBBI-36F ICBBI-30U ICBBI-36U, ICBBI-36UFD, ICBBI-36S ICBBI-42S, ICBBI-42SD ICBBI-48S, ICBBI-48SID, ICBBI-48SD TOP VIE OPENING IDT FRONT VIE 902 749 902 1054 1206 If a 2108 grille height is specified, the opening height must be decreased by 22. If a 2235 grille height is specified, the opening height must be increased by 102. If two units are installed side by side, refer to page 10 for dual standard installations. 8 English

BUILT-IN REFRIGERTION Opening Dimensions FLUS INSET INSTLLTION SIDE VIE FLUS INSET IDT 6 665 FLUS INSET DEPT 56 2134 FLUS INSET EIGT MODEL ICBBI-36R, ICBBI-36F ICBBI-30U ICBBI-36U, ICBBI-36UFD, ICBBI-36S ICBBI-42S, ICBBI-42SD ICBBI-48S, ICBBI-48SID, ICBBI-48SD 32 TOP VIE FRONT VIE *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with19 panel. 965 813 965 1118 1270 FINISED CLETS* FLUS INSET IDT 102 32 76 * TYPICL 56 Dimensions assume a 19 panel thickness. If a 2108 grille height is specified, the flush inset height must be decreased by 22. If a 2235 grille height is specified, the flush inset height must be increased by 102. If two units are installed side by side, refer to page 11 for dual flush inset installations. BUILT-IN PRO 48 INTEGRTED INE subzero.com 9

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions DUL STNDRD INSTLLTION SIDE VIE 2127 OPENING EIGT NOTE: Shaded line represents profile of unit. OPENING IDT 610 OPENING DEPT MODELS Two 762 Models 1518 762 Model and 914 Model 1670 Two 914 Models 1822 TOP VIE OPENING IDT FRONT VIE dual installation kit will be required for this installation. 10 English

BUILT-IN REFRIGERTION Opening Dimensions DUL FLUS INSET INSTLLTION SIDE VIE 6 665 FLUS INSET DEPT 56 2134 FLUS INSET EIGT *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with19 panel. FLUS INSET IDT 32 MODELS Two 762 Models 1581 762 Model and 914 Model 1734 Two 914 Models 1886 TOP VIE FLUS INSET IDT FRONT VIE FINISED CLETS* 102 32 76 * TYPICL 56 Dimensions assume a 19 panel thickness. dual installation kit will be required for this installation. BUILT-IN PRO 48 INTEGRTED INE subzero.com 11

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Electrical International models from the factory designed without a transformer require a 220-240 V C, 50/60 z electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device. The electrical supply should be located within the shaded area shown in the illustration below. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle 178 1918 FROM FLOOR RIGT SIDE OF OPENING E 152 Electrical supply location. 220-240 V C, 50/60 z 10 amp grounding-type (earthed) Plumbing For built-in models with an automatic ice maker, the water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self piercing valves. The water supply line must not interfere with installation of the anti-tip brackets. reverse osmosis system can be used provided there is constant water pressure of 2.4 8.3 bar supplied to the unit at all times. copper line is not recoended for this application. Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS ater Supply Line 6.35 OD copper line, braided stainless steel, or PEX tubing ater Pressure 2.4 8.3 bar Excess ater Line for Connection.9 m 457 RIGT SIDE OF OPENING RE EXTENDS 13 FORRD ON FLOOR ater supply location. 152 76 12 English

BUILT-IN REFRIGERTION Custom Panels For overlay and flush inset applications, custom door panels must be provided. andle hardware must also be provided for overlay and flush inset applications. Refer to panel requirements below and the charts on pages 15 18 for custom panel dimensions for your specific design application. IMPORTNT NOTE: Do not cover a glass door with a solid panel. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models. PNEL REQUIREMENTS PNEL EIGT ICBBI-36R, ICBBI-36F ll Other Models Grille Panel PNEL TICKNESS ll Panels MX 34 kg 23 kg 6 kg MIN 16 Custom Panels PNEL MOUNTING KIT Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is avail able through an authorized Sub-Zero dealer. The kit consists of mounting cleats, screws and gages used to properly position the cleats. The kit is available for all built-in models. Dual installations require two mounting kits. OVERLY PNELS Overlay panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations below. hen installing two units side by side, refer to page 10 for dual standard installations. SPCER PNEL CUSTOM PNEL BCKER PNEL TRIM 8 min 3 (OVERLY) Panel assembly cross section (overlay). CUSTOM PNEL 19 TYPICL 3 SPCER PNEL BCKER PNEL 6 Panel assembly rear view. BUILT-IN PRO 48 INTEGRTED INE subzero.com 13

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Custom Panels FLUS INSET PNELS The flush inset application is an overlay model with flush inset panels. It is not a separate model. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations for overlay panels. For flush inset panels thicker than 19, a 90 door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this guide. hen installing two units side by side, refer to page 11 for dual flush inset installations. ICE ND TER DISPENSER For models ICBBI-42SD and BI 48SD, the refrigerator door panel must include a cut-out to accoodate the external dispenser. The thickness of the panel in this area can range from 6 to a maximum of 29. Refer to the illustrations below. 16 327 160 Dispenser dimensions. 2 3 RDIUS 25 51 andle placement. NDLE GLSSELL 14 English

BUILT-IN REFRIGERTION Overlay Panel Dimensions MODEL ICBBI-36R, ICBBI-36F ICBBI-36R / ICBBI-36F ICBBI-30U / ICBBI-36U ICBBI-36UFD REFRIGERTOR / FREEZER Overlay Panel 914 1772 Spacer Panel 892 1751 Backer Panel 908 1767 GRILLE Overlay Panel 914 235 * Spacer Panel 892 211 Backer Panel 908 227 MODEL ICBBI-30U REFRIGERTOR Overlay Panel 762 1273 Spacer Panel 740 1253 Backer Panel 756 1268 FREEZER Overlay Panel 762 483 Spacer Panel 740 459 Backer Panel 756 475 GRILLE Overlay Panel 762 235 * Spacer Panel 740 211 Backer Panel 756 227 MODEL ICBBI-36U REFRIGERTOR Overlay Panel 914 1273 Spacer Panel 892 1253 Backer Panel 908 1268 FREEZER Overlay Panel 914 483 Spacer Panel 892 459 Backer Panel 908 475 GRILLE Overlay Panel 914 235 * Spacer Panel 892 211 Backer Panel 908 227 MODEL ICBBI-36UFD REFRIGERTOR (2 PNELS) Overlay Panels 454 1273 Spacer Panels 432 1253 Backer Panels 448 1268 FREEZER Overlay Panel 914 483 Spacer Panel 892 459 Backer Panel 908 475 GRILLE Overlay Panel 914 235 * Spacer Panel 892 211 Backer Panel 908 227 BUILT-IN PRO 48 INTEGRTED INE subzero.com 15

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overlay Panel Dimensions ICBBI-36S / ICBBI-42S ICBBI-48S / ICBBI-48SID B ICBBI-42SD / ICBBI-48SD MODEL ICBBI-36S REFRIGERTOR Overlay Panel 510 1772 Spacer Panel 487 1751 Backer Panel 503 1767 FREEZER Overlay Panel 398 1772 Spacer Panel 376 1751 Backer Panel 392 1767 GRILLE Overlay Panel 914 235 * Spacer Panel 892 211 Backer Panel 908 227 MODEL ICBBI-42S, ICBBI-42SD REFRIGERTOR Overlay Panel 637 1772 Spacer Panel 614 1751 Backer Panel 630 1767 FREEZER Overlay Panel 424 1772 Spacer Panel 402 1751 Backer Panel 418 1767 GRILLE Overlay Panel 1067 235 * Spacer Panel 1045 211 Backer Panel 1060 227 ICBBI-42SD Dispenser Cut-Out 149 316 B Cut-Out Location 51 732 MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD REFRIGERTOR Overlay Panel 730 1772 Spacer Panel 708 1751 Backer Panel 724 1767 FREEZER Overlay Panel 483 1772 Spacer Panel 460 1751 Backer Panel 476 1767 GRILLE Overlay Panel 1219 235 * Spacer Panel 1197 211 Backer Panel 1213 227 ICBBI-48SD Dispenser Cut-Out 149 316 B Cut-Out Location 51 732 *Panel height may be increased by 11 to hide upper main frame. Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. 16 English

BUILT-IN REFRIGERTION Flush Inset Panel Dimensions MODEL ICBBI-36R, ICBBI-36F ICBBI-36R / ICBBI-36F ICBBI-30U / ICBBI-36U ICBBI-36UFD REFRIGERTOR / FREEZER Flush Inset Panel 940 1772 Spacer Panel 892 1751 Backer Panel 908 1767 GRILLE Flush Inset Panel 940 235 Spacer Panel 892 211 Backer Panel 908 227 MODEL ICBBI-30U REFRIGERTOR Flush Inset Panel 787 1273 Spacer Panel 740 1253 Backer Panel 756 1268 FREEZER Flush Inset Panel 787 483 Spacer Panel 740 459 Backer Panel 756 475 GRILLE Flush Inset Panel 787 235 Spacer Panel 740 211 Backer Panel 756 227 MODEL ICBBI-36U REFRIGERTOR Flush Inset Panel 940 1273 Spacer Panel 892 1253 Backer Panel 908 1268 FREEZER Flush Inset Panel 940 483 Spacer Panel 892 459 Backer Panel 908 475 GRILLE Flush Inset Panel 940 235 Spacer Panel 892 211 Backer Panel 908 227 MODEL ICBBI-36UFD REFRIGERTOR (2 PNELS) Flush Inset Panels 467 1273 Spacer Panels 432 1253 Backer Panels 448 1268 FREEZER Flush Inset Panel 940 483 Spacer Panel 892 459 Backer Panel 908 475 GRILLE Flush Inset Panel 940 235 Spacer Panel 892 211 Backer Panel 908 227 BUILT-IN PRO 48 INTEGRTED INE subzero.com 17

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Flush Inset Panel Dimensions ICBBI-36S / ICBBI-42S ICBBI-48S / ICBBI-48SID MODEL ICBBI-36S REFRIGERTOR Flush Inset Panel 522 1772 Spacer Panel 487 1751 Backer Panel 503 1767 FREEZER Flush Inset Panel 411 1772 Spacer Panel 376 1751 Backer Panel 392 1767 GRILLE Flush Inset Panel 940 235 Spacer Panel 892 211 Backer Panel 908 227 MODEL ICBBI-42S, ICBBI-42SD REFRIGERTOR Flush Inset Panel 649 1772 Spacer Panel 614 1751 Backer Panel 630 1767 FREEZER Flush Inset Panel 437 1772 Spacer Panel 402 1751 Backer Panel 418 1767 GRILLE Flush Inset Panel 1092 235 Spacer Panel 1045 211 Backer Panel 1060 227 DISPENSER (ICBBI-42SD) Dispenser Cut-Out 149 316 B Cut-Out Location 51 732 ICBBI-42SD / ICBBI-48SD B MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD REFRIGERTOR Flush Inset Panel 743 1772 Spacer Panel 708 1751 Backer Panel 724 1767 FREEZER Flush Inset Panel 495 1772 Spacer Panel 460 1751 Backer Panel 476 1767 GRILLE Flush Inset Panel 1245 235 Spacer Panel 1197 211 Backer Panel 1213 227 DISPENSER (ICBBI-48SD) Cut-Out 149 316 B Cut-Out Location 51 732 Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. 18 English

BUILT-IN REFRIGERTION Flush Inset Panels PNEL OFFSETS The illustrations provide panel offsets and reveals for built-in models in a flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET LL REFRIGERTOR / LL FREEZER Door / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom OVER-ND-UNDER Door / Drawer / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom SIDE-BY-SIDE Doors (hinge) / Grille Sides Doors (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom ILLUS C D F ILLUS C D E F ILLUS B C D F TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C 8 CBINETRY GRILLE DOOR DRER Illus. E CBINETRY 13 16 3 8 13 SIDE VIE 8 2 4 8 SIDE VIE 16 DOOR 8 3 Illus. B Illus. D GRILLE DOOR Illus. F DOOR / DRER TOP VIE SIDE VIE DOOR 6 REVEL 8 4 2 8 SIDE VIE 8 13 2 BUILT-IN PRO 48 INTEGRTED INE subzero.com 19

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Dual Installation If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 51 filler strip is recoended between units. custom filler strip is required when installing two French door or side-by-side models. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. ITOUT FILLER STRIP Opposite hinges. FILLER STRIP Same side hinges. For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 15 16. Panel dimensions and offsets for dual flush inset installations are listed on the following pages. 20 English

BUILT-IN REFRIGERTION Dual Flush Inset Panel Dimensions ICBBI-36R / ICBBI-36F MODEL ICBBI-36R, ICBBI-36F REFRIGERTOR / FREEZER Flush Inset Panel 927 1772 Spacer Panel 892 1751 Backer Panel 908 1767 GRILLE Flush Inset Panel 927 235 Spacer Panel 892 211 Backer Panel 908 227 MODEL ICBBI-30U REFRIGERTOR Flush Inset Panel 775 1273 Spacer Panel 740 1253 Backer Panel 756 1268 FREEZER Flush Inset Panel 775 483 Spacer Panel 740 459 Backer Panel 756 475 GRILLE Flush Inset Panel 775 235 Spacer Panel 740 211 Backer Panel 756 227 ICBBI-30U / ICBBI-36U MODEL ICBBI-36U REFRIGERTOR Flush Inset Panel 927 1273 Spacer Panel 892 1253 Backer Panel 908 1268 FREEZER Flush Inset Panel 927 483 Spacer Panel 892 459 Backer Panel 908 475 GRILLE Flush Inset Panel 927 235 Spacer Panel 892 211 Backer Panel 908 227 Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. For dual wide grilles, refer to page 23. BUILT-IN PRO 48 INTEGRTED INE subzero.com 21

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Dual Installation DUL FLUS INSET PNEL OFFSETS The illustrations provide panel offsets and reveals for built-in models in a dual flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET LL REFRIGERTOR / LL FREEZER Door (hinge) / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom OVER-ND-UNDER Door (hinge) / Drawer / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom ILLUS B C D F ILLUS B C D E F TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C 8 CBINETRY GRILLE DOOR DRER Illus. E CBINETRY 13 16 3 8 13 SIDE VIE 8 2 4 8 SIDE VIE 16 DOOR 8 3 Illus. B Illus. D Illus. F GRILLE DOOR DOOR / DRER TOP VIE DUL TRIM SIDE VIE 6 REVEL 8 4 2 8 SIDE VIE 8 DOOR 13 2 22 English

BUILT-IN REFRIGERTION Dual Installation DUL IDE GRILLE dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. For overlay and flush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 2134 finished height. DUL IDE GRILLE OVERLY TO 762 MODELS Overlay Panel 1530 235 Spacer Panel 1508 211 Backer Panel 1524 227 762 MODEL ND 914 MODEL Overlay Panel 1683 235 Spacer Panel 1661 211 Backer Panel 1676 227 TO 914 MODELS Overlay Panel 1835 235 Spacer Panel 1813 211 Backer Panel 1829 227 DUL IDE GRILLE FLUS INSET TO 762 MODELS Flush Inset Panel 1556 235 Spacer Panel 1508 211 Backer Panel 1524 227 762 MODEL ND 914 MODEL Flush Inset Panel 1708 235 Spacer Panel 1661 211 Backer Panel 1676 227 TO 914 MODELS Flush Inset Panel 1861 235 Spacer Panel 1813 211 Backer Panel 1829 227 BUILT-IN PRO 48 INTEGRTED INE subzero.com 23

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Side Panel The custom side panels must be a minimum of 610 deep and 13 thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below. hen installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer. 610 ROUT TO 3 48 25 108 ROUT TO 5 (OVER-ND-UNDER MODELS) OPTIONL TOE KICK CUT-OUT 102 Side panel dimensions. FRONT OF SIDE PNEL 146 521 67 2134 25 3 13 MIN FRME Routing detail. 48 SIDE PNEL ROUTING Standard andles Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. Refer to the chart below for standard handle lengths for built-in models. NDLE LENGT BUILT-IN TUBULR PRO Full Door 1622 1147 Over-and-Under Door 1124 952 762 Drawer 633 447 914 Drawer 770 600 1067 Drawer 922 753 24 English

BUILT-IN REFRIGERTION Overlay and Flush Inset Panels FULL-SCLE TEMPLTE Overlay and flush inset panels must be a minimum of 16 thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. 25 Overlay and flush inset panel thickness. 6 BCKER PNEL DOOR 51 DEPT OF TUBULR ND PRO NDLES 76 32 PNEL 25 PNEL 19 PNEL 3 SPCER PNEL BUILT-IN PRO 48 INTEGRTED INE subzero.com 25

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Overlay pplication FULL-SCLE TEMPLTE 0 6 13 19 25 32 38 44 51 57 63 70 76 83 89 606 TO RER OF UNIT 25 TICK PNEL 19 TICK OVERLY PNEL (TYPICL) 6 BCKER PNEL OVERLL IDT OF UNIT 0 SCLE 25 90 door opening (top view). 26 English

BUILT-IN REFRIGERTION Flush Inset pplication FULL-SCLE TEMPLTE For panels thicker than 19, a 90 door stop may be required to prevent interference with adjacent cabinets. 25 TICK PNEL 19 TICK FLUS INSET PNEL (TYPICL) 6 BCKER PNEL 610 TO BCK LL 56 SSUMES 19 FLUS INSET PNEL TICKNESS 32 0 SCLE 25 BUILT-IN PRO 48 INTEGRTED INE 110 door opening (top view). subzero.com 27

BUILT-IN REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN PPROX PROFILE OF STINLESS STEEL RPPED DOOR ND NDLE Dual Standard Installation FULL-SCLE TEMPLTE Typical overlay or stainless steel dual installation with filler strip at maximum 110 door opening. Panel thickness may require a 90 door stop. 0 SCLE 25 FILLER STRIP 32 DOOR CLOSED DOOR OPEN 110 Dual standard installation (top view). 28 English

BUILT-IN REFRIGERTION PROFILE OF 19 FLUS INSET PNEL ND TUBULR NDLE Dual Flush Inset Installation FULL-SCLE TEMPLTE Typical flush inset dual installation with filler strip at maximum 110 door opening. Panel thickness may require a 90 door stop. 0 SCLE 25 FILLER STRIP 38 13 DOOR CLOSED DOOR OPEN 110 BUILT-IN PRO 48 INTEGRTED INE Dual flush inset installation (top view). subzero.com 29

PRO 48 REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN PRO 48 Refrigeration Freshness finds unmistakable expression in the Sub-Zero PRO 48. 363 kg monument to food preservation equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in or freestanding. PRO 48 MODELS ICB648PRO ICB648PROG KEY FETURES Can be used freestanding or installed as a standard or flush built-in application. Stainless steel interior as well as exterior. andles coordinate with handles of olf ranges. Dual refrigeration system enhanced with triple evaporators allow independent control of storage conditions in refrigerator cabinet and drawer compartments. Slide-out stainless steel bins fit neatly under refrigerator glass shelves. Exterior temperature display. Flip-up grille provides easy access for quick routine maintenance. Star-K certified. 30 English

PRO 48 REFRIGERTION Overall Dimensions PRO 48 MODELS 1219 EIGT DIMENSIONS ± 13 368 Models ICB648PRO and ICB648PROG. 1070 775 533 2134 60 102 606 781 657 767 SPECIFICTIONS INTERIOR CPCITY R (L) F (L) ICB648PRO, ICB648PROG 521 331 BUILT-IN PRO 48 INTEGRTED INE subzero.com 31

PRO 48 REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions STNDRD ND FLUS INSTLLTION SIDE VIE OPENING EIGT TOP VIE OPENING IDT FRONT VIE OPENING DIMENSIONS INSTLLTION D Standard 1206 2127 610 Flush 1219 2137 660 D OPENING DEPT For standard built-in installations, the face frame of the unit will extend 51 beyond cabinetry. For flush installations, the front of the face frame will be flush with surrounding cabinetry. 32 English

PRO 48 REFRIGERTION Electrical International models from the factory designed without a transformer require a 220-240 V C, 50/60 z electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device. The electrical supply should be located within the shaded area shown in the illustration below. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle 178 1918 FROM FLOOR RIGT SIDE OF OPENING E 152 Electrical supply location. 220-240 V C, 50/60 z 1 amp grounding-type (earthed) Plumbing The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self piercing valves. The water supply line must not interfere with installation of the anti-tip bracket. reverse osmosis system can be used provided there is constant water pressure of 2.4 8.3 bar supplied to the unit at all times. copper line is not recoended for this application. Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS ater Supply 6.35 OD copper line, braided stainless steel, or PEX tubing ater Pressure 2.4 8.3 bar Excess ater Line for Connection.9 m 76 RIGT SIDE OF OPENING 152 132 RE EXTENDS 13 FORRD ON FLOOR ater supply location. BUILT-IN PRO 48 INTEGRTED INE subzero.com 33

PRO 48 REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Standard andles Refer to the chart below for standard handle lengths for PRO 48 models. NDLE LENGT PRO 48 TUBULR PRO Door N 703 Refrigerator Drawer N 506 Freezer Drawer N 294 34 English

INTEGRTED REFRIGERTION Integrated Refrigeration ith custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen. INTEGRTED MODELS ICBIC-18FI ICBID-30RP ICBID-30CI ICBIC-24R ICBIC-24FI ICBID-36CI ICBIC-30RID ICBIC-30FI KEY FETURES Custom front panels and hardware allow for infinite design options. Point-of-use refrigeration that can be placed anywhere in the home. Dual refrigeration; two compressors preserve food s goodness in self-contained compartments. Energy efficient. ll models rated + or higher. Star-K certified. ICBIC-36RID ICBIT-30RID ICBIT-30CIID ICBIT-36CIID BUILT-IN PRO 48 INTEGRTED INE subzero.com 35

INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Specifications INTERIOR CPCITY COLUMN R (L) F (L) ICBIC-18FI 230 ICBIC-24R 352 ICBIC-24FI 338 ICBIC-30RID 475 ICBIC-30FI 415 ICBIC-36RID 590 TLL R (L) F (L) ICBIT-30RID 397 ICBIT-30CIID 295 95 ICBIT-36CIID 359 130 DRER R (L) F (L) ICBID-30RP 138 ICBID-30CI 58 39 ICBID-36CI 72 49 IMPORTNT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. Overall Dimensions COLUMN 2134 * *2121 MIN TO 2146 MX COLUMN 45 114 1765 B 610 92 MODEL B ICBIC-18FI 457 64 419 ICBIC-24R, ICBIC-24FI 610 102 572 ICBIC-30RID, ICBIC-30FI 762 143 724 ICBIC-36RID 914 184 876 36 English

INTEGRTED REFRIGERTION Overall Dimensions TLL 2134 * 467 TLL *2121 MIN TO 2146 MX 45 114 1140 338 268 10 10 B 610 92 MODEL B ICBIT-30RID, ICBIT-30CIID 762 143 724 ICBIT-36CIID 914 184 876 DRER 467 338 876 * 268 DRER *864 MIN TO 889 MX MODEL ICBID-30RP, ICBID-30CI ICBID-36CI 6 10 610 92 762 914 BUILT-IN PRO 48 INTEGRTED INE subzero.com 37

INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions INTEGRTED MODELS SIDE VIE OPENING EIGT 635 OPENING DEPT OPENING IDT NOTE: 89 finished returns will be visible and should be finished to match cabinetry. 89 FINISED RETURN 19 TYPICL FRMELESS CBINETRY 89 FINISED RETURN TOP VIE FRONT VIE FILLER FRMED CBINETRY OPENING DIMENSIONS COLUMN ICBIC-18FI 457 2134 ICBIC-24R, ICBIC-24FI 610 2134 ICBIC-30RID, ICBIC-30FI 762 2134 ICBIC-36RID 914 2134 TLL ICBIT-30RID, ICBIT-30CIID 762 2134 ICBIT-36CIID 914 2134 DRER ICBID-30RP, ICBID-30CI 762 876 ICBID-36CI 914 876 The depth of each integrated model is 610. llow for panel thickness when planning the finished opening depth. minimum 89 finished return is required on all sides of the opening. Framed cabinets will require additional finished filler material behind the face frame for a proper installation. Refer to the illustration. DUL INSTLLTION hen installing two units side by side in a dual installation, the opening width is the width of the two units added together. dual installation kit will be required for this installation. If a dual installation kit is not specified, a minimum 51 filler strip is required between units. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. 38 English

INTEGRTED REFRIGERTION Electrical The electrical supply must be located within the shaded area shown in the illustration and chart below. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle 220-240 V C, 50/60 z 10 amp grounding-type (earthed) ELECTRICL SUPPLY LOCTION IDT 457 Model 152 610 Model 241 762 Model 318 914 Model 394 114 6 LEFT SIDE OF OPENING E FLOOR Electrical supply location. 108 Plumbing The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self piercing valves. The water supply line must not interfere with installation of the anti-tip bracket. reverse osmosis system can be used provided there is constant water pressure of 2.4 8.3 bar supplied to the unit at all times. copper line is not recoended for this application. Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS ater Supply Line 6.35 OD copper line, braided stainless steel, or PEX tubing ater Pressure 2.4 8.3 bar Excess ater Line for Connection.9 m TER SUPPLY LOCTION IDT 457 Model 76 610 Model 140 762 Model 152 914 Model 229 76 RIGT SIDE OF OPENING 152 RE EXTENDS 13 FORRD ON FLOOR ater supply location. BUILT-IN PRO 48 INTEGRTED INE subzero.com 39

INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Custom Panels For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. The thickness of the custom panel can vary. minimum 16 thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 610. llow for panel thickness when planning the finished opening depth. Refer to the full-scale template on page 43. CUTION s reveals between cabinetry and the unit decrease, severe finger pinching can occur while door is closing. Finish all sides of custom panels. They will be visible when the door/drawer is open. D-style handles are recoended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. PNEL REQUIREMENTS COLUMN MX EIGT 457 Model 20 kg 610 Model 27 kg 762 / 914 Model 34 kg TLL (DOOR) MX EIGT 762 Model 22 kg 914 Model 27 kg DRER Drawer Panel PNEL TICKNESS ll Panels MX EIGT 7 kg MINIMUM 16 TYPICL PNEL DIMENSIONS 2029 Typical panel dimensions are based on a 2134 finished height for column and tall models and 876 for drawer models, with a 102 toe kick and 3 reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths. PNEL IDT MODEL 457 Model 451 610 Model 603 762 Model 756 914 Model 908 DUL INSTLLTION For dual installations, refer to the illustration for panel heights and the chart below for panel widths. 1254 345 424 Column Tall Drawer PNEL IDT MODEL 457 Model 452 610 Model 605 762 Model 757 914 Model 910 40 English

INTEGRTED REFRIGERTION Custom Panels DOOR PNEL EIGT The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. 2134 3 45 DOOR PNEL INGE Upper valance (column and tall) side view. DECORTIVE VLNCE CNNOT EXTEND BEYOND TIS PLNE 610 TO BCK OF UNIT TOE KICK CLERNCE The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 51 to 98 require a reduced toe kick accessory available through an authorized Sub-Zero dealer. 51 * TO 152 FROM FLOOR INGE DOOR PNEL *51 to 98 requires sales accessory. Toe kick side view. VENTED LOUVERS 610 TO BCK OF UNIT 29 MX TOE KICK DJUSTMENT DECORTIVE TOE KICK CNNOT EXTEND BEYOND TIS PLNE BUILT-IN PRO 48 INTEGRTED INE subzero.com 41

INTEGRTED REFRIGERTION INE INTEGRTED PRO 48 BUILT-IN Standard andles Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. Refer to the chart below for standard handle lengths for integrated models. NDLE LENGT INTEGRTED TUBULR PRO Column Door 1273 1229 Tall Door 845 800 762 Drawer 692 648 914 Drawer 845 800 42 English

INTEGRTED REFRIGERTION 0 POTENTIL INTERFERENCE DJCENT CBINETRY SCLE 3 REVEL 25 19 PNEL POTENTIL INTERFERENCE DOOR OPEN MXIMUM 105 Maximum Door Opening FULL-SCLE TEMPLTE s the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by utilizing the 90 door stop. DOOR CLOSED 19 PNEL BUILT-IN PRO 48 INTEGRTED INE Maximum door opening (top view). subzero.com 43

INE STORGE INE INTEGRTED PRO 48 BUILT-IN ine Storage ine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired Sub-Zero helps make a wine collection an element of beauty in the home. INE STORGE MODELS ICB424G ICB424FSG KEY FETURES Integrated, overlay, flush inset and stainless steel design options. Full-view glass door standard on all models. Discreet interior lighting with illuminated display rack for prized bottles of wine. Two independent storage zones maintain temperature, humidity and UV protection. Full extension, cherrywood-faced wine racks for easy access. ine racks accoodate 750 ml bottles, half-bottles and magnums. Inventory system helps organize wine collection. Freestanding model ICB424FSG does not require panels or surrounding cabinetry. Model ICBI-30R features two refrigerator storage drawers. ICBI-18 ICBI-24 ICBI-30 ICBI-30R ICBS-30 44 English

INE STORGE Overall Dimensions MODEL ICB424G 606 610 SPECIFICTIONS 864 645 102 44 STORGE CPCITY BOTTLES (750 ML) ICB424G 46 ICB424FSG 46 MODEL ICB424FSG 616 625 868 645 102 44 Freestanding model ICB424FSG has a finished stainless steel exterior and handles. Overall dimensions are based on the stainless steel model. Refer to page 65 for door clearance information. BUILT-IN PRO 48 INTEGRTED INE subzero.com 45

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions MODEL ICB424G SIDE VIE OPENING IDT MODEL ICB424G 876 OPENING EIGT 610 OPENING DEPT TOP VIE OPENING IDT FRONT VIE 610 46 English

INE STORGE Overall Dimensions COLUMN 2134 * *2121 MIN TO 2146 MX COLUMN 45 114 1765 B 610 92 MODEL B ICBI-18 457 64 419 ICBI-24 610 102 572 ICBI-30 762 143 724 TLL 2134 * 451 TLL *2121 MIN TO 2146 MX 45 114 1140 338 268 10 10 B 610 92 MODEL B ICBI-30R 762 143 724 IMPORTNT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. BUILT-IN PRO 48 INTEGRTED INE subzero.com 47

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Specifications INTERIOR CPCITY COLUMN BOTTLES (750 ML) ICBI-18 59 ICBI-24 102 ICBI-30 146 TLL R (L) BOTTLES (750 ML) ICBI-30R 113 86 48 English

INE STORGE Opening Dimensions INTEGRTED INE STORGE SIDE VIE OPENING EIGT 635 OPENING DEPT OPENING IDT NOTE: 89 finished returns will be visible and should be finished to match cabinetry. 89 FINISED RETURN 19 TYPICL FRMELESS CBINETRY 89 FINISED RETURN TOP VIE FRONT VIE FILLER FRMED CBINETRY OPENING DIMENSIONS COLUMN ICBI-18 457 2134 ICBI-24 610 2134 ICBI-30 762 2134 TLL ICBI-30R 762 2134 The depth of each integrated (ICBI) model is 610. llow for panel thickness when planning the finished opening depth. minimum 89 finished return is required on all sides of the opening. Framed cabinets will require additional finished filler material behind the face frame for a proper installation. Refer to the illustration. DUL INSTLLTION The unit can be installed next to an integrated refrigeration model or another integrated wine storage model in a dual installation. hen installing two units side by side, the opening width is the width of the two units added together. dual installation kit will be required for this installation. If a dual installation kit is not specified, a minimum 51 filler strip is required between units. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. BUILT-IN PRO 48 INTEGRTED INE subzero.com 49

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Overall Dimensions MODEL ICBS-30 606 796 762 EIGT DIMENSIONS ± 13 1873 432 2134 102 60 665 606 SPECIFICTIONS STORGE CPCITY BOTTLES (750 ML) ICBS-30 147 Overall dimensions are based on the stainless steel model. For flush inset applications, add 13 to door clearance dimensions. Opening Dimensions MODEL ICBS-30 STNDRD INSTLLTION SIDE VIE OPENING IDT MODEL ICBS-30 2127 OPENING EIGT 610 OPENING DEPT NOTE: Shaded line represents profile of unit. TOP VIE OPENING IDT FRONT VIE 749 If a 2108 grille height is specified, the opening height must be decreased by 22. If a 2235 grille height is specified, the opening height must be increased by 102. If two units are installed side by side, refer to page 52 for dual standard installations. 50 English

INE STORGE Opening Dimensions MODEL ICBS-30 FLUS INSET INSTLLTION SIDE VIE FLUS INSET IDT MODEL ICBS-30 665 FLUS INSET DEPT 56 6 2134 FLUS INSET EIGT 32 TOP VIE FRONT VIE FINISED CLETS* FLUS INSET IDT *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 19 panel. 813 102 32 76 * TYPICL 56 Dimensions assume a 19 panel thickness. If a 2108 grille height is specified, the flush inset height must be decreased by 22. If a 2235 grille height is specified, the flush inset height must be increased by 102. If two units are installed side by side, refer to page 53 for dual flush inset installations. BUILT-IN PRO 48 INTEGRTED INE subzero.com 51

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Opening Dimensions MODEL ICBS-30 DUL STNDRD INSTLLTION SIDE VIE 2127 OPENING EIGT NOTE: Shaded line represents profile of unit. OPENING IDT MODELS ICBS-30 and 762 Built-In ICBS-30 and 914 Built-In 610 OPENING DEPT 1518 1670 TOP VIE OPENING IDT FRONT VIE dual installation kit will be required for this installation. 52 English

INE STORGE Opening Dimensions MODEL ICBS-30 DUL FLUS INSET INSTLLTION SIDE VIE 6 665 FLUS INSET DEPT 56 2134 FLUS INSET EIGT *76 typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with19 panel. FLUS INSET IDT MODELS ICBS-30 and 762 Built-In ICBS-30 and 914 Built-In 32 TOP VIE FLUS INSET IDT 1581 1734 FRONT VIE FINISED CLETS* 102 32 76 * TYPICL 56 Dimensions assume a 19 panel thickness. dual installation kit will be required for this installation. BUILT-IN PRO 48 INTEGRTED INE subzero.com 53

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Electrical The electrical supply must be located within the shaded area shown in the illustration for your specific model. For integrated (ICBI) models, also refer to the chart. separate circuit, servicing only this appliance is required. ground fault circuit interrupter (GFCI) is not recoended and may cause interruption of operation. If the unit will be connected to a home security system, allow 914 of excess wiring for proper connection. Installation must comply with all applicable electrical codes. ELECTRICL REQUIREMENTS Power Supply Circuit Breaker Receptacle 51 LEFT SIDE OF OPENING 394 E FLOOR Model ICB424G. 76 220-240 V C, 50/60 z 10 amp grounding-type (earthed) 178 1918 FROM FLOOR RIGT SIDE OF OPENING Model ICBS-30. E 152 ELECTRICL SUPPLY LOCTION MODEL ICBI-18 ICBI-24 ICBI-30, ICBI 30R 114 6 LEFT SIDE OF OPENING E FLOOR 108 Integrated (ICBI) models. 152 241 318 54 English

INE STORGE Custom Panels For overlay, integrated and flush inset applications, custom door panels must be provided. andle hardware must also be provided for overlay, integrated and flush inset applications. Refer to panel requirements and custom panel dimensions charts for your specific model and design application. Do not install a solid panel on a glass door unit. solid door is available as a sales accessory (except model ICBS-30) and must be installed if a solid panel is being specified. Service may be required to install the door. Contact an authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models. Model ICB424FSG has a finished stainless steel exterior that is designed to be used in a freestanding application. Custom Panels ICB424G For model ICB424G, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes. Refer to the charts for panel requirements and dimensions. PNEL REQUIREMENTS PNEL EIGT ICB424G PNEL TICKNESS ICB424G OVERLY PNEL DIMENSIONS ICB424G MX 5 kg MIN 16 PNEL DIMENSIONS MODEL ICB424G 603 764 STILES / RILS (MIN) ICB424G DOOR CLERNCE 57 Model ICB424G can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit 6 beyond the front surface of adjacent cabinetry to prevent interference when the door is opened to 145. Refer to the fullscale template on page 65. BUILT-IN PRO 48 INTEGRTED INE subzero.com 55

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels Integrated Models For integrated (ICBI) models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. Do not install a solid panel on the glass door unit. solid door is available as a sales accessory through an authorized Sub-Zero dealer. The thickness of the custom panel can vary. minimum 16 thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 610. llow for panel thickness when planning the finished opening depth. Refer to the full-scale template on page 43. CUTION s reveals between cabinetry and the unit decrease, severe finger pinching can occur while door is closing. Finish all sides of custom panels. They will be visible when the door/drawer is open. D-style handles are recoended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. PNEL REQUIREMENTS STILES / RILS Stiles Top Rail Bottom Rail Bottom Rail (ICBI-30R) PNEL EIGT Door Frame Door Frame (ICBI-30R) Drawer Panel PNEL TICKNESS ll Panels IDT 83 197 241 114 MX 16 kg 11 kg 7 kg MIN 16 TYPICL PNEL DIMENSIONS Column 2029 Tall 1254 345 424 Typical panel dimensions are based on a 2134 finished height, 102 toe kick and 3 reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths. PNEL IDT MODEL ICBI-18 ICBI-24 ICBI-30, ICBI-30R DUL INSTLLTION For dual installations, refer to the illustration for panel heights and the chart below for panel widths. PNEL IDT MODEL ICBI-18 ICBI-24 ICBI-30, ICBI-30R 451 603 756 452 605 757 56 English

INE STORGE Custom Panels Integrated Models DOOR PNEL EIGT The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. 2134 3 45 DOOR PNEL INGE Upper valance side view. DECORTIVE VLNCE CNNOT EXTEND BEYOND TIS PLNE 610 TO BCK OF UNIT TOE KICK CLERNCE The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 51 to 98 require a reduced toe kick accessory available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. 51 * TO 152 FROM FLOOR INGE DOOR PNEL *51 to 98 requires sales accessory. Toe kick side view. VENTED LOUVERS 610 TO BCK OF UNIT 29 MX TOE KICK DJUSTMENT DECORTIVE TOE KICK CNNOT EXTEND BEYOND TIS PLNE BUILT-IN PRO 48 INTEGRTED INE subzero.com 57

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels ICBS-30 OVERLY PNELS Overlay panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations below. PNEL REQUIREMENTS PNEL EIGT Door Grille PNEL TICKNESS Overlay SPCER PNEL CUSTOM PNEL BCKER PNEL TRIM DOOR FRME 8 min 3 GLSS Panel assembly cross section (overlay). CUSTOM PNEL 19 TYPICL 3 MX 34 kg 6 kg MIN 16 SPCER PNEL BCKER PNEL 6 Panel assembly rear view. OVERLY PNEL DIMENSIONS ICBS-30 OVERLY PNELS DOOR Overlay Panel 762 1772 Spacer Panel 740 1751 Backer Panel 756 1767 STILES / RILS Minimum 83 GRILLE Overlay Panel 762 235 * Spacer Panel 740 211 Backer Panel 756 227 *Panel height may be increased by 11 to hide upper main frame. Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. 58 English

INE STORGE Custom Panels ICBS-30 FLUS INSET PNELS The flush inset application is an overlay model with flush inset panels. It is not a separate model. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 19 custom panel, a 3 spacer panel and a 6 backer panel. Refer to the illustrations for overlay panels on the previous page. For flush inset panels thicker than 19, a 90 door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale template on page 68. PNEL REQUIREMENTS PNEL EIGT Door Grille PNEL TICKNESS Flush Inset MX 34 kg 6 kg MIN 16 FLUS INSET PNEL DIMENSIONS ICBS-30 FLUS INSET PNELS DOOR Flush Inset Panel 787 1772 Spacer Panel 740 1751 Backer Panel 756 1767 STILES / RILS Minimum 95 GRILLE Flush Inset Panel 787 235 Spacer Panel 740 211 Backer Panel 756 227 Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. BUILT-IN PRO 48 INTEGRTED INE subzero.com 59

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels ICBS-30 FLUS INSET PNEL OFFSETS The illustrations provide panel offsets and reveals for model ICBS-30 in a flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET FLUS INSET Door / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom ILLUS B C D TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C GRILLE DOOR 8 CBINETRY 13 16 8 4 2 8 SIDE VIE 13 Illus. B Illus. D CBINETRY GRILLE DOOR / DRER SIDE VIE 3 8 13 SIDE VIE 8 2 60 English

INE STORGE Custom Panels ICBS-30 DUL INSTLLTIONS If two models ICBS-30 or a model ICBS-30 and built-in unit are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 51 filler strip is recoended between units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. For dual standard installations, panel dimensions are the same as for single installations. Panel dimensions and offsets for dual flush inset installations are listed on the following pages. ITOUT FILLER STRIP Opposite hinges. FILLER STRIP Same side hinges. DUL FLUS INSET PNEL DIMENSIONS ICBS-30 MODEL ICBS-30 DOOR Flush Inset Panel 775 1772 Spacer Panel 740 1751 Backer Panel 756 1767 STILES / RILS Minimum 95 GRILLE Flush Inset Panel 775 235 Spacer Panel 740 211 Backer Panel 756 227 Grille panel dimensions are for standard 2134 overall unit height. For 2108 height, subtract 25 from grille panel height dimensions and for 2235 height, add 102. specific panel grille must be ordered for a 2108 or 2235 overall unit height. BUILT-IN PRO 48 INTEGRTED INE subzero.com 61

INE STORGE INE INTEGRTED PRO 48 BUILT-IN Custom Panels ICBS-30 DUL FLUS INSET PNEL OFFSETS The illustrations provide panel offsets and reveals for model ICBS-30 in a dual flush inset application. Refer to the chart below for reference to the illustrations. PNEL OFFSET DUL FLUS INSET Door (hinge) / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom ILLUS B C D E TOP VIE DOOR / DRER / GRILLE BCKER SPCER FLUS INSET PNEL Illus. Illus. C Illus. E 8 CBINETRY GRILLE DOOR / DRER SIDE VIE CBINETRY 13 16 3 8 13 SIDE VIE 8 2 DOOR 8 3 Illus. B Illus. D GRILLE DOOR TOP VIE DUL TRIM 6 REVEL 8 4 2 8 SIDE VIE DOOR 13 62 English