Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl UR Robust Series Strip metl Current strip ble ow TCR, Sense to withstnd ow inductnce Resistors high Surfce Mount temperture nd high current. Designed for current sensing in power electronic systems ow Robust TCR metl nd strip Inductnce ble to withstnd high Solid metl element withstnds high current surges UR Resistnce temperture Series Rnge nd high from current. mω to 22 mω Welwyn Components RoHS complint RoHS ow TCR complint nd Inductnce AEC-Q200 Qulified AEC-Q200 Resistnce Rnge from mω to 22 mω Higher wttge devices feture PCB clernce gp to Blck RoHS cot complint mximize therml performnce A low AEC-Q200 TCR resistnce lloy plte, with tin plted connection bnds is protectively coted on the upper nd lower fces nd numericlly Electricl mrkeddt with the resistnce vlue. This prt is suitble for wve or reflow soldering. Higher wttge devices feture PCB clernce gp to mximize cot therml performnce All prts re Pb-free nd comply with EU Directive 2011/65/EU (RoHS2) A low TCR resistnce lloy plte is grooved to set the finl resistnce, the lower fces re tin plted for connections, nd it is protectively coted on the upper nd lower fces nd numericlly mrked with the resistnce Electricl vlue. This prtdt is ONY suitble for reflow soldering. Type Size Coting Dielectric Power Rting Stndrd Resistnce Vlues TCR Tolernce Ambient Withstnding @ 80 C (W) 1 (±ppm/ C) (±%) Temperture ( C) Voltge (V) URG1 /, 0.6, 0.75, 1, 2, 3, 4, 5, 6, 1206 1 UR1S 7, 8, 9, 10 None 2 URG15 /, 0.75, 1, 2, 3, 4, 5, 6, 1.5 UR15S 7, 8, 9, 10 N/A URG1 / UR1 1 11, 12,. 13, For14, vlues 15, 22including frctions 50 of milliohm the mrking is 3 or URG2 / UR2 2 6.5, 7, 8, 9, 10 URG25 / Note 1: For vlues bove 2.5 0R015 refer to our 3.5, R / RF 4, 4.5, Series 5, 5.5, 6 UR25 Note 2: Colour of coting reltes to solder process suitbility, see 1, 5 URG3 /, 0.75 100 Stndrd vlues vilble 3 (non-stndrd vlues my be vilble to order - consult fctory UR3 1, 1.5, 2, 2.5, 3 50 200-55 to +170, 0.75, 1, 1.5, 2 50 URB1 / 2.5, 3, 3.5 150 None 150 UR1 Blck 4, 4.5, 5, 5.5, Sn10Plted Finish 100 Blck 6, 6.5, 7, 7.5 Cot & Uncoted 75 URB2 / UR2 2, 0.75, 1, 1.5, 2 50 Uncoted A low TCR resistnce lloy plte is grooved to set the finl resistnce nd the lower fce only is protected with n epoxy coting. The lower fces re tin plted for connections. This prt is ONY suitble for reflow soldering. Mrking Only size prts re mrked. For vlues which re integer numbers of milliohms, the mrking is 4-chrcter IEC62 code; e.g. R002 for 2m, R010 for 10m 4-chrcter code using M to indicte the deciml point, e.g. M75 for 0.75m, 1M50 for 1.5m. Termintion Detils: Mteril Mtt tin plted finish over brrier lyer Solderbility 95% min coverge (MI-STD 202F / 208H, 235ºC 2 secs) Notes: 1. For higher resistnce vlues plese refer to RMA series. 2. Pckge sizes 1206 nd re uncoted on the top surfce nd unmrked. Performnce Dt AEC-Q200 Tble 7 Mx. (dd R0005) ref. Method Blck & Test uncoted 3 High Temp. Exposure * MI-STD-202 Method 108 1 1 4 Temperture Cycling JESD22 Method JA-104 1 6 Moisture Resistnce MI-STD-202 Method 106 1 1 7 Bised Humidity MI-STD-202 Method 103 1 1 8 Opertionl ife (Cyclic od) * MI-STD-202 Method 108 1 1 14 Vibrtion MI-STD-202 Method 204 15 Resistnce to Soldering Het * MI-STD-202 Method 210 1 16 Therml Shock * MI-STD-202 Method 107 1 18 Solderbility J-STD-002 >95% coverge 21 Bord Flex AEC-Q200-005 22 Terminl Strength AEC-Q200-006 0.25 0.25 Short Term Overlod * 5 x Pr for 5s 1 Notes: 1. Full AEC-Q200 qulifiction pplies to size. The 1206 nd sizes hve received the tests mrked *. Generl Note P TT electronics Electronics reserves the right to to mke mke chnges in product in product specifiction without without notice notice or libility. or libility. All informtion is is subject to to TT TT Electronics electronics own own dt dt nd nd is is considered ccurte ccurte t time t time of going of going to print. to print. Power de-rting grph 100% TT Electronics electronics plc plc 50% www.bitechnologies.com www.irctt.com www.welwyn-tt.com 03.14
Metl Element UR Series Mke Possible Physicl Dt Dimensions (mm) nd weight (mg) Size Coting Vlues (±0.25) W T (±0.2) D Wt (nom) 1206, 0.6, 1, 4, 5, 6 1.1 ±0.25 1.6 2, 3, 10 3.20 0.6 ±0.25 ±0.1 7, 8, 9 0.9 ±0.25 20 None, 1, 4, 5 1.84 ±0.25 2, 6, 7, 8 2.54 1.54 ±0.25 5.08 3 ±0.15 1.04 ±0.25 40 9, 10 0.6 1.29 ±0.25 2.68 ±0.25 0.75 2.48 ±0.25 1, 5, 6 3.0 1.93 ±0.25 1.5, 6.5, 7 ±0.2 1.43 ±0.25 2 3, 8-22 1.18 ±0.25 4, 4.5 2.18 ±0.25 1.4 0.75, 2.5 1.0 1 0.8 6.35 1.5 0.65 60 2, 5, 6 Blck 3 3.18 0.7 1.3 ±0.38 3.5 ±0.25 0.71 4 0.6 4.5 8 5.5, 6.5 0.47 7 0.45 10 0.8 1.9 ±0.15 Metl Strip s Surfce Mount UR Series Welwyn Components Blck cot A low TCR resistnce lloy plte, with tin plted connection bnds is protectively coted on the upper nd lower fces nd numericlly mrked with the resistnce vlue. This prt is suitble for wve or reflow soldering. cot A low TCR resistnce lloy plte is grooved to set the finl resistnce, the lower fces re tin plted for connections, nd it is protectively coted on the upper nd lower fces nd numericlly mrked with the resistnce vlue. This prt is ONY suitble for reflow soldering. Uncoted A low TCR resistnce lloy plte is grooved to set the finl resistnce nd the lower fce only is protected with n epoxy coting. The lower fces re tin plted for connections. This prt is ONY suitble for reflow soldering. Mrking Only size prts re mrked. For vlues which re integer numbers of milliohms, the mrking is 4-chrcter IEC62 code; e.g. R002 for 2m, R010 for 10m. For vlues including frctions of milliohm the mrking is 3 or 4-chrcter code using M to indicte the deciml point, e.g. M75 for 0.75m, 1M50 for 1.5m. Blck Sn Plted Finish Cot & Uncoted Termintion Detils: Mteril Mtt tin plted finish over brrier lyer Solderbility 95% min coverge (MI-STD 202F / 208H, 235ºC 2 secs) AEC-Q200 Tble 7 Test Generl Note Mx. (dd R0005) TT Electronics reserves the right to mke chnges in product specifiction without notice or libility. ref. Method All informtion is subject to TT Electronics own dt nd is considered ccurte t time of going to print. Blck & uncoted TT 3 Electronics plchigh Temp. Exposure * MI-STD-202 Method 108 1 1 4 Temperture Cycling JESD22 Method JA-104 6 Moisture Resistnce MI-STD-202 Method 106 1 1
Metl Element UR Series Electricl Connections Electricl pd lyout Connections pd lyout 2-wire pd lyout 5.4 mesurement points Mke Possible 1.2 5.4 1.0 3.45 1.5 1.2 1.0 3.45 1.5 Probe di. Probe di. 4unit: -wiremm pd lyout 2-wire pd lyout mesurement points pd lyout 2-wire pd lyout mesurement 4.32points 2-wire pd lyout 1.05 4.32 0.8 2.9 1.2 1.05 0.8 2.9 1.2 Probe di. Probe di. pd lyout 1206 2-wire pd lyout 1206 mesurement points 1206 pd lyout 1206 2-wire pd lyout 1206 mesurement points 1206 2.6 mesurement points 0.7 1.9 1.25 0.7 1.9 1.25 2.6 Probe di. Probe di. Pckge Resistnce - Blck All 2.7 2.9 3.13 2 0.75 2.93 0.94 1 2.38 2.04 1.5 1.88 3.04-2 - 3 1.63 3.54 4, 4.5 2.63 1.54 5-6 2.38 2.04 6.5, 7 1.88 3.04 8-22 1.63 3.54 Suggested Alterntive 4-Wire Design Methods Pckge 1206-1206 - Resistnce 1 1.55 5, 0.6 1.55 5 2-3 1.05 1.55 4 1, - 4 6 6 1.55 1.55 5 5 72-93, 10 1.35 1.05 0.95 1.55 10 7 9 1.05 1.35 1.55 0.95 1, 1, 4-5 2.29 2.29 0.95 0.95 2 1.99 1.55 2, 6 8 1.99 1.55 3 1.49 2.55 43-5 2.29 1.49 0.95 2.55 69-810 1.99 1.74 1.55 2.05 9-10 1.74 2.05 Note: Nominl vlues; tolernces not included Wire nd Film Technologies Division 4222 South Stples Street Corpus Christi Texs 78411 USA Telephone: 361 992 7900 Fcsimile: 361 992 3377 Website: www.irctt.com UR Issue April 2011 Sheet 3 of 6 Vis with copper trces on internl lyers. Sense trces on Solder pds beneth the chip Generl Note TT Electronics reserves the right to mke chnges in product specifiction without notice or libility. All informtion is subject to TT Electronics own dt nd is considered ccurte t time of going to print.
Metl Element UR Series Mke Possible Power Derting Curve Rted Power (%) 100 50 0 0 80 170 Ambient Temperture ( C) Note: The power derting curve is guidnce bsed on conservtive design model. The UR is solid metl lloy construction tht cn withstnd significntly greter operting tempertures thn the conservtive model permits. The protective coting will operte up to 260 C nd the lloy cn withstnd in excess of 350 C. Therefore, the system therml design will be more signifi cnt design prmeter due to the het limittions of the solder joint. Plstic tpe Specifiction Plstic Tpe Speci fiction Top Tpe ψ D0 A E B F W T Resistor Emboss Tpe P1 P2 P0 Direction of unreeling ψ D1 Type Resistnce A B W E F P 0 P 1 P 2 ΦD 0 ΦD 1 T Quntity (EA) 1206 1-10 1.90 ± 0.1 3.60 ± 0.1 8.0 ± 0.2 1.75 ± 0.1 3.5 ± 0.05 4.0 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.55 ± 0.05 1.0min. 0.87 ± 0.1 2,000 1-10 2.85 ± 0.1 5.55 ± 0.1 12.0 ± 0.2 1.75 ± 0.1 5.5 ± 0.05 4.0 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.55 ± 0.05 1.4min 0.85 ± 0.1 2,000 Blck Note: 1. 2. 3. 4. 5. 0-0.75 1.45 ± 0.2 3.40 ± 0.1 6.75 ± 0.1 12.0 ± 0.1 1.75 ± 0.1 5.5 ± 0.05 4.0 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.55 ± 0.05 1.4min 1-10 0.81 ± 0.1 0-15 3.40 ± 0.1 6.75 ± 0.1 12.0 ± 0.1 1.75 ± 0.1 5.5 ± 0.05 4.0 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.55 ± 0.05 1.4min 0.81 ± 0.1 2,000 The cumultive tolernce of 10 sprocket hole pitch is ± 0.2 mm. Crrier cmber shll not be more thn 1 mm per 100 mm through length of 250 mm. A & B mesured 0.3 mm from the bottom of the pcket. T mesured t point on the inside bottom of the pcket to the top surfce of the crrier. Pocket position reltive to sprocket hole is mesured s the true position of the pocket nd not the pocket hole. 2,000 Generl Note TT Electronics reserves the right to mke chnges in product specifiction without notice or libility. All informtion is subject to TT Electronics own dt nd is considered ccurte t time of going to print.
Metl Element UR Series Mke Possible Ordering Procedure This product hs two vlid prt numbers: Europen (Welwyn) Prt Number: UR2-R0015FT2 (, 1.5 milliohms ±1%, Pb-free) U R 2 - R 0 0 1 5 F T 2 1 2 3 4 1 2 3 4 Type Vlue Tolernce Pcking UR1S 4-6 chrcters F = ±1% T2 = Plstic tpe UR1 R = ohms J = ±5% All sizes 2000/reel UR15S UR2 UR25 UR3 USA (IRC) Prt Number: URB2R0015FFST (, 1.5 milliohms ±1%, Pb-free) U R B 2 2 5 1 2 R 0 0 1 5 F F S T 1 2 3 4 5 6 1 2 3 4 5 6 Type Size Vlue Tolernce Termintion Pcking URG1 1206 4-6 chrcters F = ±1% F = Pb-free ST = Plstic tpe URG15 R = ohms J = ±5% All sizes 2000/reel URG2 URG25 URG3 URB1 URB2 Generl Note TT Electronics reserves the right to mke chnges in product specifiction without notice or libility. All informtion is subject to TT Electronics own dt nd is considered ccurte t time of going to print.