Atlas Copco Light Compaction and Concrete Equipment Compaction efficiency, optimum vibrations and better surfaces all are important

Atlas Copco Light Compaction and Concrete Equipment Compaction efficiency, optimum vibrations and better surfaces all are important

L I G H T C O M P A C T I O N E Q U I P M E N T Walk Behind Rollers Atlas Copco double drum rollers are designed for optimum results on granular soil, asphalt and wet sand. They are well suited for smaller jobs in confined areas. LP 6500 I electric start LP 8504 850 Operating mass kg 676 1675 Centrifugal force kn 20 65 Operating speed m/min 60/38 20.5/20.3 forward/ reverse Drum width mm 650 850 Amplitude mm 0.45 1.1 Frequency Hz 61 32 Engine Lombardini Hatz 15LD440 2G40 Rated power kw 5.6 12.5 H/A vibrations, 2 m/s 4.0 standard handle Part number 3382 00 0082 3382 0000 80 Forward Soil & Asphalt Plates Do it all backfilling, block paving and asphalt surfacing. Hook on the water tank for asphalt or a kit for block paving and you are all set for every type of compaction work. Options: Water sprinkling kit, Block paving kit and Transportation wheel. LF 100 Petrol LF 100 Diesel LF 160 Diesel Operating mass kg 95 104 162 Centrifugal force kn 17 17 25.4 Speed m/min 25 25 20 Plate with/ mm 500 500 500 diameter** Amplitude mm 0.9 0.9 1.27 Frequency Hz 95 95 85 Engine Honda Hatz Greaves GX 160 1B20 1520 Rated power kw 4.1 2.5 3.3 Vibration reduced Standard handle Part number 3382 0000 28 3382 0000 30 3382 0001 32 Rammers Simplicity and outstanding compaction performance In deep compaction, our rammers are eager to take on challenges even in the toughest conditions. Cohesive soil and narrow spaces are no match for these hard-hitting machines with all-round capabilities for applications such as repair jobs, trenches or foundations. LT 6004 LT 800 Operating mass kg 75 85 Force/blow kn 14.8 21.4 Speed m/min 15-18 21.4 Plate with mm 280 330 Amplitude mm 66-75 75-85 Frequency Hz 12 12 Engine Honda GX 100 Hatz 1B20 Rated power kw 2.2 3.4 H/A vibrations 2 m/s 4.9 12.6 Part number 3382 0000 02 3382 0000 51 Forward & Reversible Plates Long-term investment in efficiency Our high speed and high compaction efficiency reversible plates are popular and economical alternatives or complements to rollers for the compaction of soil in confined areas. A top-quality steel bottom plate, compaction indicator and vibrationreducing enable you to get the job done in the best possible way. LG 160 LG 200 LG 400 electric start Operating mass kg 174 231 436 Centrifugal force kn 28 36 52 Speed m/min 22 25 25 Plate width mm 450 500 650 Amplitude mm 1.4 1.9 1.8 Frequency Hz 80 65 60 Engine Hatz Hatz Lombardini 1B20 1B20 15LD440 Rated power kw 2.8 3.1 6.2 H/A vibrations 2 m/s 2.4 3.5 2.1 Part number 3382 0000 12 3382 0000 66 3382 0000 09

C O N C R E T E E Q U I P M E N T ( V I B R A T I O N ) Electronic Poker - The Smart Series Start work straight away Thanks to the built-in frequency converter, all you need to start working is a regular wall socket with the appropriate voltage. Electric Pokers - The AX and Vibrastar Series AX Series There's AX poker for almost any application. From high to low slump concrete, from thin beams to extensive foundations. AX POKERS AX36 AX40 AX48 AX56 AX65 AX90 Tube diameter(mm) 36 40 48 56 65 90 Tube length (mm) 322 320 350 380 410 566 Tube weight (kg) 2.1 2.1 4.1 5.1 7.7 18 Ampere at 42 V (A) 6.2 4,5 10 11.7 19 21 E series Frequency (vpm) 12 000 6 000 Cable length (m) 10 Hose length (m) 5 Voltage (V) 42V-3-200 Hz Part number 4812050827 4812050828 4812050829 4812050830 4812050831 4812050879 Vibrastar Series The electric motor is very efficient owing to its newly developed stator and rotor. Hand/arm vibration is also reduced thanks to the new design. Low voltage reduces the risk of electric shock. Table for low to medium slump concrete. ELECTRONIC POKERS 40 48 56 65 E40* E48* E56* SMART/ SMART-E Tube diameter (mm) 40 48 56 65 40 48 56 Tube length (mm) 320 350 380 410 320 350 380 Hose length (mm) 5 0.5 Cable length (mm) 15 15 Frequency (vpm) 12000 Primary voltage(v) ±10% 230 V-1-50 / 60 Hz 230V-1-50 / 60 Hz Converter dimensions 300 x 100 x 80 LxWxH (mm) VIBRASTAR 40 50 60 Tube diameter (mm) 40 48 60 Tube length (mm) 255 284 330 Tube weight (kg) 1.84 3.06 5.1 Ampere at 42V (A) 4 8 11 Frequency (vpm) 12 000 Cable length (m) 10 Hose length (m) 5 Voltage (V) 42V-3-200 Hz Part number 4812 0508 49 4812 0508 50 4812 0508 51 Part number 4812050852 4812050853 4812050854 4812050855 4812050863 4812050864 4812050865 *With reduced vibration handle

Power to the poker Let the power of the electric poker follow you wherever the jobs take you. Electric frequency converters and engine driven generators have several advantages compared to drive units for mechanical pokers. To begin with they can supply several pokers with power simultaneously. The electric rotary frequency converters come with 1, 2 or 4 outlets and our generators are available with 2, 3 or 4 outlets. Robust construction featuring side panels for concrete splash protection prolong lifetime. Frequency Converters FREQUENCY CONVERTERS CF 11 CF 25 CF 67 Power (kva) 1.8 1.8 4.7 Intensity at 42V - (A) 11 25 67 Number of phases 1 1 & 3 3 (primary voltage) Number of outlets 1 2 4 Weight (kg) 18 31 72 Protection index IP55 Transport wheels - optional standard Part number 230V-1-50Hz 4812050395 4812050394 400V-3-50Hz 4812050393 4812051051 440V-3-50Hz CI4P 4812051054 ** Voltage working range of CF25T & CF67T is from 380 V to 440V Generators GENERATOR Options for making hard work easier with AX Poker There will always be situations that call for individual solutions. The options available to our standard pokers solve many of these challenges. Elastomer end-caps To avoid imparting excessive vibration to the formwork or reinforcement and to reduce risk of reinforcement collapse. AVAILABLE FOR TUBE DIAMETER Ergonomic Handle For easy use and less vibration on hand AVAILABLE FOR TUBE DIAMETER High amplitude 36 mm 40 mm 48 mm 48 mm 65 mm 40 mm 48 mm 56 mm For low slump concrete. Massive centrifugal fore and amplitude combined with rapid acceleration give high efficiency and great results. AVAILABLE FOR TUBE DIAMETER 40 mm 48 mm 56 mm 65 mm Rigid cane Helps you guide the poker trough the reinforcements and reduces the risk of getting stuck. Especially applications such as walls, columns or foundations. AVAILABLE FOR TUBE DIAMETER Hose length CFG 25 CFD 33 CFG 67 CFD 67 Engine type-4-stroke & manual start Honda Lombardini Honda Lombardini GX 270 15 LD 225 GX 160 15 LD 225 Fuel Petrol Diesel Petrol Diesel Fuel tank litres 3,1 3 5,3 4,3 Max power Hp 4,8 4,8 8,4 7,5 at 3,600 rpm Rated speed rpm 3000 Output rated power kva 1,8 2 4,7 4,6 Numbers of outlets 2 3 4 4 Rated amperage A 25 33 67 65 Rated output voltage V-Hz 42V-3-200Hz Weights kg 45 68 85 95 Noise level (Lw) db(a) 93 104 96 107 Wheels Optional Optional yes yes Voltmeter yes Part number 4812 0514 70 4812 0514 71 4812 0514 72 4812 0514 73 36mm 40 mm 48 mm 56 mm Standard hose length is 5 meters. Many of our pokers can be customized with up to 12 meters hose length. AVAILABLE FOR TUBE DIAMETER 28 mm 36 mm 40 mm 48 mm 56 mm 65 mm 90 mm

C O N C R E T E E Q U I P M E N T ( V I B R A T I O N ) High Frequency Pokers AME 600 - small but vibrant AME 600 POKER HEADS (HIGH FREQUENCY) AME 1500 - a versatile poker AME 1500 AME 1500 POKER HEADS AME600 DRIVE UNITS DOUBLE INSULATED, SPLASH TIGHT AME600 Voltage V-Hz 230V-1-50/60Hz Power W 600 Frequency rpm 3,000 Weight Kg 1.9 Part number 4812 0508 72 HA 25/1 HA 25/2 HA 25/3 HA 35/1 HA 35/2 HA 35/3 HA 45/1 HA 45/2 Tube diameter mm 25 35 45 Tube length mm 295 330 375 Flexible shaft m 1 2 3 1 2 3 1 2 Total weight kg 2.8 4.1 5.4 4.4 6 7.6 5.8 7.4 Frequency vpm 12,000 Vibration value m/s2 1.7 Part number 4812 0512 50 4812 0512 51 4812 0512 52 4812 0512 53 4812 0512 54 4812 0512 55 4812 0512 56 4812 0512 57 DRIVE UNITS ELECTRIC Voltage V-Hz 230V-1-50/60 Power w 1500 Frequency rpm 12,000 Weight Kg 5 Part number 4812 0508 69 AT POKERS AT 29 AT 39 AT 49 AT 59 Tube diameter (mm) 29 39 49 59 Tube length (mm) 332 315 311 306 Tube weight (kg) 1.3 2.1 2.7 3.9 Speed (rpm) 12 000 Part number 4812050805 4812050806 4812050807 4812050808 Mechanical Pokers (Pendulum Type) Reinforced material in pokers and hoses plus top class components ensure long life of products. DRIVE UNITS Power (kw) 3.0 3.2 1.3 1.1 Speed (rpm) 2 900 2 900 2 850 2 850 Part number 9740036920 4700368606 - - 230V-1-50 Hz - - 9740036919-440V-3-50 Hz - - - 9740036935 Couplings 9740036918 9718CR1327 9740036921 Frame with accessories 9718CR1325 9718CR1328 9718CR1326 BEST SELLING ELECTRIC DIESEL PETROL SINGLE PHASE THREE PHASE AA Poker FLEXIBLE SHAFTS SUPERFLEX 10 SUPERFLEX 15 SUPERFLEX 20 SUPERFLEX 30 SUPERFLEX 10 Length (m) 1.0 1.5 2.0 3.0 4.0 Part number 4812050813 4812050814 4812050815 4812050816 4812050817

Pneumatic Pokers - The AY Series HIGH FREQUENCY POKER AZ POKERS AZ26 AZ36 AZ46 AZ56 Tube diameter (mm) 25 35 45 55 Tube length (mm) 295 330 375 390 Tube weight (kg) 0.5 1.8 1.9 2.0 Frequency (vpm) 12 000 11 300 Part number 4812 0508 09 4812 0508 10 4812 0508 11 4812 0508 12 HIGH FREQUENCY POKER AA POKERS AA27 AA37 AA47 AA67 AA77 Tube diameter (mm) 25 39 49 63 75 Tube length (mm) 335 385 448 480 500 Tube weight (kg) 0.9 2.1 4.0 6.8 9.0 Frequency (vpm) 12,000 12,000 11,200 10,500 9,200 2 Vibration value (m/s ) 2.46 1.56 3.52 2.66 3.16 Part number 4812 0508 00 4812 0508 01 4812 0508 02 4812 0508 03 4812 0508 04 Clean and cool in all sizes Powered by compressed air, the pneumatic poker is an economical alternative, especially if an air compressor is already at the work site. Few moving parts mean long service life and low hand/arm vibration. Highly resistant tubes ensure long life. Lubricator is available as an option. PNEUMATIC POKERS AY POKERS AY27 AY37 AY47 AY57 AY67 AY77 AY87 AY107 AY157 26 36 47 56 67 77 87 108 155 Tube diameter (mm) Tube length (mm) 254 267 316 344 365 398 410 415 430 Tube weight (kg) 0.7 1.5 2.8 4.5 7.9 8.9 9.7 17.7 28 Frequency (vpm) 12 000 Air consumption 0.36 0.46 0.7 1 1 1.3 1.6 1.9 2.7 3 (m /mn) Hose length (m) 2 2 2 2 2 2 1,5 1.5 0.8 Part number 4812050818 4812050819 4812050820 4812050821 4812050822 4812050823 4812050824 4812050825 4812050826 2 mtr hose Applications CONCRETE TYPES Electric/ Electronic Mechanical Pneumatic VIBRASTAR AX SMART AA AZ AT HA AY Low slump - ü ü þ - - - ü Medium Slump ü ü ü ü ü þ þ ü High Slump ü ü ü ü ü ü ü ü - Unsuitable þ Less suitable ü Suitable

C O N C R E T E E Q U I P M E N T ( E X T E R N A L V I B R A T I O N S ) EP Pneumatic Vibrators Noise reduced efficiency Suitable for all concrete mixes on civil engineering sites and in precast factories. A single moving part improves the possibilities for seamless operation. No periodic maintenance required. The integrated noise reducer makes these vibrators very quiet. Available with quick-release brackets. The assurance of good external vibrations To meet your external vibration requirements, Atlas Copco offers a wide range of vibrators - from high speed pneumatic to normal frequency electric - all with adjustable centrifugal force, In addition to reliable equipment, we also provide our customers with more than 50 years of experience from this field. HIGH SPEED PNEUMATIC VIBRATORS NORMAL SPEED ELECTRIC VIBRATORS EP121B EP271B EP371B EP601B Speed (rpm) 9 000 9 350 9 350 8 800 Max. centrifugal force (N) 8 100 10 350 26 800 31 500 Air consumption (l/min) 1200 1400 Weight (kg) 9.5 10 16.5 18 Bracket attachment VT2 VT2 VT4 VT4 Part number 4812050986 4812050987 4812050988 4812050989 Bracket 4700102569 4700102569 4700101970 4700101970 ER Electric Vibrators (3000 rpm) ER105 ER205 ER305 ER405 ER505 ER605 ER705 Speed (rpm) 3 000 Max. centrifugal force (N) 500 1 400 3 000 6 000 8 000 12 000 16 000 Intensity at 400V (A) 0.09 0.18 0.4 1.09 1.3 1.9 2.5 Weight (kg) 2.7 4.3 11 20 22 44.6 46.8 Part number 4812050910 4812050920 4812050930 4812050940 4812050950 4812050960 4812050970 Bracket 4700185771 4700485771

ER Electric Vibrators Flexibility and performance Good concrete vibration and excellent results thanks to flexible, high centrifugal force. In order to increase flexibility and cost effectiveness, ER207B, ER407B and ER507B vibrators are mounted on quick release brackets for easy portability, thus fewer units are required. Highquality components and materials help you keep life cycle and maintenance costs down. HIGH SPEED ELECTRIC VIBRATORS ER207B ER407B ER507B Speed (rpm) 6000 Max. centrifugal force (N) 7 400 11 000 16 000 Voltage (Hz) 42V-3-200 Intensity (A) 12.5 16.5 23.5 Weight (kg) 10.5 15.5 23.2 Bracket attachment VT2 VT4 VT4 Part number 4812 0509 80 4812 0509 81 4812 0509 82 Bracket 4700 1025 69 4700 1019 70 4700 1019 70

C O N C R E T E E Q U I P M E N T ( S U R F A C I N G ) Modular Screeds Effective on big jobs With big challenges ahead, such as runways and bridges that need compaction, leveling and finishing, the BT90 is an extremely effective partner. BT90 MODULAR DRIVE SECTIONS DRIVE SECTION Electric DRIVE SECTION Petrol Length mm 720 Width mm 535 620 Height mm 980 Frequency rpm 2,865 2,900 Input kw 3 5.5 Powered by 400V-3-50 Hz Honda GX 270 Part number 4812 0509 95 4812 0509 96 BT90 MODULAR SCREED SECTIONS SCREED SCREED SCREED SECTIONS SECTIONS SECTIONS 1 m section 2 m section 3 m section Length mm 1,095 2,095 3,095 Width mm 420 Height mm 376 Part number 4812 0509 97 4812 0509 99 4812 0510 01 Electric/Petrol BT90 ACCESSORIES 0.5 M EXTENSION OUTRIGGER (with rollers) Length mm 500 Width mm 420 300 Height mm 421 300 Part number 4812 0510 03 4812 0510 49

Double Beam Screeds Powerful in-depth action, lightweight aluminium design for ease of handling and excellent balance for level surfaces. Walk Behind Screeds The easy way to a smooth surface Finishing Beam Walk behind screeds provide one of the most convenient ways to treat wet concrete surfaces. VIBRATING UNITS BE20 BE200 BE30 Type Electric Petrol Input Voltage / 400V-3-50 Hz Honda GX 120 Engine Type 4-stroke Power input kw 0.45 2.3 (3.5 hp) (output power) Weight kg 19 35 Suitable for screed BD32-BD62 BD520-BD800 BD32-BD720 Part number 4812 0508 96 4812 0508 97 4812 0510 04 BD DOUBLE VIBRATING SCREEDS BD32 BD42 BD52 BD62 BD520 BD620 BD720 BD800 Height of mm 100 150 Profile Width mm 300 between profiles Length m 3.2 4.2 5.2 6.2 5.2 6.2 7.2 8.0 Part 4812050899 4812050900 4812050901 4812050902 4812050903 4812050904 4812050905 4812050906 number ACCESSORIES OUTRIGGER OUTRIGGER WITH SKATE SKATE FOR BD LIFTING DEVICE (Complete set (Complete set SCREEDS for one side) for one side) Type U 2 U 3 SKT SKT Suitable for screed All BD screeds All BD screeds BD32 - BD62 BD520 - BD942 Part number 4700 0211 45 4700 0112 24 4700 8005 15 4700 0223 64 BV30 WALK BEHIND VIBRATING SCREED BV30 Weight, drive unit kg 13.5 Vibrating unit* 4-stroke Honda GX35 Power kw (hp) 1.2 (1.6) at 7,000 rpm Vibration frequency Hz up to 166 Centrifugal force N max 3,460 Part number without blade 4812 0510 05 BV30 SCREED BLADE 1.8 m 2.4 m 3.0 m 3.6 m 4.2 m Working m 1.82 2.44 3.5 3.66 4.26 width Weight kg 6.5 8 9.6 11.2 12.8 Part D604 0329 58 D604 0329 59 D604 0329 18 D604 0329 60 D604 0329 61 number BV WALK BEHIND VIBRATING AND NON- VIBRATING SCREEDS BV20E BV20G BV20H Electric Petrol Manual Working width m 2.0 Weight operating kg 18 14.8 7.4 Length handle m 1.8+1.8 Energy Electric Petrol Manual Motor 230V-1-50 4-stroke - Honda GX25 Power kw 0.27 0.72 (1.0) - (hp) at 7,000 rpm Vibration Hz 166 up to 166 - frequency Centrifugal force N 2,000 max 1,100 - Part number 4812 0511 49 4812 0511 51 4812 0511 54

C O N C R E T E E Q U I P M E N T ( S U R F A C E F I N I S H I N G ) Ride-on Trowels Reliability and power for big jobs For the biggest jobs and highest demands we recommend the Ride-On Trowels. Its reliability, power and responsiveness are much appreciated features among larger contractors. Robust design, powerful engine and heavy duty gearbox generates trust. Accessories available (optional) floating blades, combination blades, smoothing disk (clip-on), smoothing disk (securing catch), lifting sling and transport wheels (dolly jacks). RIDE-ON TROWELS BG740 BG910 BG920 Steering control Mechanical Hydraulic Operating weight kg 333 475 658 Troweling path width mm (in) 1,880 (74 ) 2,336 (97,5 ) 2,336 (95 ) Rotor diameter mm (in) 914 (36 ) 1,168 (46 ) 1,168 (46 ) Maximum rotor speed rpm <145 <140 Number of blade arms 2 x 4 2 x 5 (non overlapping) (non overlapping) Engine 4-stroke Honda Bridge & Stratton Kubota GX690 Vanguard Turbo Charged Power kw (hp) 18 (24) 26 (35) 33 (44) Fuel Petrol Diesel Fuel tank capacity l 23 Cruise control no yes Dimensions (L x W x H) mm 1,980 x 1,040 x 1,350 2,540 x 1,280 x 1,470 2,540 x 1,280 x 1,510 Seat vibration overall 2 m/s 2.76 1.4 0.96 Hand vibration maximum 2 m/s 3 4.8 5.53 Sound power level, guaranteed db(a) 86.8 103 83.2 Part number 3382 0001 52 3382 0001 53 3382 0001 54

*QuickStop is a unique feature that stops rotation immediately. Edger Trowels Easy handling in confined spaces Small jobs can be as challenging as big ones. Our BG240 trowel was developed to assist you in those confined, hard-to-work-in areas. It is perfect for those hard to reach places close to the wall or other obstacles. Accessories available (optional) floating disc, trowel blade and transportation wheel. Power Trowels Power and safety High Capacity trowels with 900 to 1200 mm trowel Diameter. All controls are easily reached from adjustable handle, which is designed to increase stability for better. A simple but effective belt clutch system enables variable speed, which means troweling can start earlier. Accessories (optional) :Floating Disc, Trowel Blade, Protection ring etc. Electrical Combi Trowels 2-in-1 capacity Two interchangeable protection rings - 850 and 1020 mm with steel wire netting for optimum visibility together with spring lock blade fastening make switching machine trowel diameters between 850, 915 and 1,020 mm quick & easy. Accessories available (optional) floating disc, trowel blade and protection ring. BG240 TROWELS BG POWER TROWELS BG COMBI POWER TROWELS BG240 (P) BG240 (E) BG 370 BG 470 BG COMBI Protection ring diameter mm 615 950 1200 850 / 1,020 Operating weight kg 59 88/89 105 88 / 90 Blade diameter mm 600 900 1140 850 / 915*/ 980* Floating Disc diameter mm 610 945-865 / 965* / 1,015* Floating blade diameter mm - 645 1160 - Blade speed rpm 40-115 120 40-115 60/ 120 Number of blades 4 4 4 Type of handle Short foldable Short Long Long Pitch control Quick-Pitch Twist-Pitch Twist-Pitch Engine Honda Gx120 (4-stroke) 230V-1-50 / 60Hz Honda GX160 (4-Stroke) Honda GX270 (4-Stroke) 400V-3-50 Power kw (hp) 2.9 (4.0) 1.5 (input) 4.1 (5.5) 6.6 (9.0) 1.6/ 2.4 (Low speed/ High speed) Fuel Petrol - Petrol - Fuel tank capacity l 2.5-3.1 5.3 - Lifting hook Standard Standard Standard Transport wheels Accessory Accessory Standard Blade arm type Bolt-on Quick release, Bolt-on Bolt-on Quick release, Bolt-on Model code H4-S-QP E-S-QP H5-S-TP H9-L-TP E-L-TP Sound power, guaranteed L db(a) - - - - 94 wa Sound pressure at operators ear LpAdB(A) - - - - 77 Part number 3382 0001 00 3382 0001 02 3382 0001 03 3382 0001 10 3382 0001 08 (850 mm protection ring) (5.5 hp) (5.5 hp) 3382 0001 09 (1020 mm protection ring)

C O N C R E T E E Q U I P M E N T Clean Straight Cuts Straight cuts, no fuss. The OrkaTM is the very best of operator friendly floor saws: All major controls such as the on/off switch, throttle control and indepth control are placed together. The handle is height-adjustable and reversible for easy storage. ORKA CONCRETE & ASPHALT FLOOR SAWS DIAMOND DISKS FOR FLOOR SAWS ORKA ORKA 350/450 350/450D Standard disk size mm 350 or 450 Max. cutting depth mm 175 Engine Honda GX390 QXC4 Lombardini 15 LD 350 Fuel Petrol Diesel Power kw (hp) 9.6 (13) 5.1 (7) Water tank capacity l 30 Weight kg 98 108 Part number 4812 0510 07 4812 0510 08 350F 350C 350A 450F 450C 450A Blade Diameter mm 350 450 Pcs/ pack 5 1 Blade Type For fresh concrete For old concrete For asphalt For fresh concrete For old concrete For asphalt Part number 4700 3685 94 4700 3685 93 4700 3685 92 4700 3685 95 4700 3685 87 4700 3685 88 Self-sharpening wave design of the diamond segment. Optimized cut, increased cutting power, less stress on the floor saw. Screed Rails The fast screeding solution increase efficiency with leave-in-place screed rail and stopper, skates and track rails. Creating even surfaces has never been easier. Faster setup, lower labor and production costs, stronger joints, reduced need for floor sawing the advantages compared to traditional methods of concreting floors are many. The Screed has a metal leave-in-place rail and stopper with a removable plastic strip on top for the screed to slide on. The plastic strip can be left in place or replaced by a different joint material. Cost effective Lower labor costs and no unnecessary work With Screed rail you can assemble the form immediately prior to concreting, saving both time and money by reducing production and labor costs. Screed rail is an easier way to level concrete floors with less filling work. Flexible Suitable for all beddings The whole system is lightweight, easy to transport, convenient to use and comes in sizes to cover most floor Simplicity Skates eliminate the need for rails types. Plastic adjusting screws make it easy to level the rails. When a certain distance between the reinforcement and the top surface is needed, the user-friendly skates are a smart option. The reusable track rail is yet another practical alternative for use in combination with outriggers for screeds and beams. Re-usable Track rails for use outside the form Outrigger Can be mounted and used with elevated track rails

SUSTAINABLE PRODUCTIVITY An investment in quality is an investment in sustainability and reliability. Intelligent engineering, top quality materials, first-class components and modern engines with low fuel consumption and emissions contribute to long lasting machines with high trade-in values. To keep things that way, and to maximize your uptime, we provide reliable service whenever and wherever you need it. At the end of the day, you get the job done with good results. Atlas Copco s goal is to help you reduce maintenance, increase efficiency and keep life cycle costs down. DYNAPAC TECHNOLOGY All Atlas Copco compaction equipment is based on Dynapac Technology. This marque of excellence provides exceptional end results based on experience, engineering expertise and on numerous successful innovations. After more than 75 years at the forefront of compaction and asphalt technology, Dynapac remains a famous brand in road construction. The Atlas Copco range of light compaction equipment is based on this heritage. LIGHT COMPACTION RANGE AND CONCRETE EQUIPMENT BRANCH ADDRESS CODE PHONE FAX NORTH ZONE Unitech Business Park, Tower 'A', First Floor, Block F, Sector-41, GURGAON 122 001 (0124) 3027920 3027924 SCO 811, 1st Floor, NAC, Manimajra, CHANDIGARH 161 101. (0172) 3934922 3934911 WEST ZONE Mahatma Gandhi Memorial Building, 2nd Floor, Netaji Subhash Road, MUMBAI 400 002 (022) 32544556 22819946 406, Baleshwar Avenue, Opp. Rajpath Club, Sarkej-Gandhinagar Highway, AHMEHABAD 380 015 (079) 26872892 26872547 2nd Floor, Tellus Technologies Pvt. Ltd. 209/1B/1A, Range Hill Road, PUNE 411 020 (020) 30257116 30257117 3rd Floor, Gupta Towers, Opp. Science College Ground, Civil Lines, NAGPUR 440 001 (0712) 3258155 6617972 EAST ZONE Trinity Plaza, 2nd Floor, West Wing, 84/1 A, Topsia Road (South), KOLKATA 700 046 (033) 22851041 22851043 SOUTH ZONE 136, Arcot Road, West Wing Shyamala Towers, 8th Floor, Saligramam,CHENNAI 600 093 ( 044) 39156021 39156022 1/A, 5th Foor, Kushal Garden C Block, Peenya Industrial Area, Phase II,BANGALORE 560 058 ( 080) 39280191 39220042 6/2, Kongu Complex, Sankari Road, TIRUCHENGODE 637 211 ( 4288) 254575 254575 CENTRAL ZONE 6-3-1191-1196, Brij Tarang Greenlands, Begumpet, HYDERABAD 500 01 6 (040) 39188727 23417923 We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines. The above information is a general description only, is not guaranteed and contains no warranties of any kind. Atlas Copco Construction Technique Atlas Copco (India) Ltd. Sveanagar, Dapodi, Pune 411012 Phone: (020) 3985 2100, Fax: (020) 3985 2070 Reach us @ 1800 200 0030 www.atlascopco.com