ID Chair Concept Antonio Citterio, 2010/2012 ID Chair Concept Vitra deelops new solutions for the changing work enironment and has experimented with materials and technologies for the past fifty years with the aim of creating better office chairs. The ID Chair Concept is a collection of office swiel chairs that puts all this experience and expertise into practice for the benefit of companies and the people who work for them. The office chair is by far the most important piece of furniture for office workers, as it has a decisie influence on productiity, health and well-being in the workplace. Since indiiduals spend countless hours sitting at work, they not only expect 'their' chair to keep them healthy and fit, but also to help define their personal sphere within the space of the office. The increasingly dierse expectations of employees run counter to the interests of companies: facility managers and procurement teams aim to rationalise purchasing, serice and maintenance with standardised chairs. It is not possible for a single office chair to satisfy these conflicting demands. Antonio Citterio, a master of systems, recognised the need for a unified range of ersatile models in his collaboratie work with Vitra. The ID Chair Concept was deeloped to meet the multifarious requirements functional, economic and aesthetic of both employees and companies in today s office world. 1 ID Chair Concept 2-3 Countless options 4-8 ID Chair, backrest 9-11 FlowMotion mechanism 12 ProMatic mechanism Antonio Citterio The architect and designer Antonio Citterio, who lies and works in Milan, has collaborated with Vitra since 1988. Together they hae produced a series of office chairs and arious office systems, as well as products for the Vitra Home Collection. The Citterio Collection is constantly being expanded. 13 Armrests 14-15 Coer fabrics 16-17 Sustainable quality 18 Modular components 19-22 ID Air 23-26 ID Mesh 27-30 ID Soft 31-34 ID Trim 35-38 ID Trim L info@itra.com EN 2014 www.itra.com/idchair 1
COUNTLESS OPTIONS Different ID Chair models in subdued shades of light grey. Leather and fabric coers in earthy colours. ID Chairs with a classic look in dark tones. 2 info@itra.com EN www.itra.com/idchair
COUNTLESS OPTIONS ID Air with fresh colours on the seat cushions. ID Mesh with netweae backrests and seat upholstery in muted hues. Twill wool fabric gies ID Trim and ID Trim L an elegant appearance. info@itra.com EN www.itra.com/idchair 3
ID CHAIR CONCEPT Components of the modular ID Chair system The ID Chair Concept offers countless customisation options to suit indiidual users. Choices between the precisely adjustable FlowMotion mechanism or the ProMatic mechanism with automatic weight adjustment, arious types of backrests, bases and armrests as well as many different colours and upholstery coers make it possible for eery indiidual user and eery company to find their 'own' ID Chair. Despite the many possible combinations, it always remains essentially the same chair bringing adantages both in terms of acquisition and maintenance. The office swiel chair range is made up of many components to satisfy a wide spectrum of requirements with respect to aesthetics, materials, purpose and price. Choosing the right ID Chair begins with the following selection of basic models: ID Air with perforated plastic backrest ID Mesh with padded mesh backrest ID Soft with classic upholstered backrest ID Trim with narrow backrest ID Trim L with high backrest 4 info@itra.com EN www.itra.com/idchair
ID AIR BACKREST ID Air backrest with zones of arying flexibility ID Air represents simplicity in design without relinquishing comfort. The one-piece plastic backrest of ID Air is manufactured in a patented process. The pattern of strategically placed perforations and the high-tech plastic material create fi rmer zones to proide support and more pliant zones to grant freedom of moement. The fl exibility of the backrest and effectie air circulation are complemented by soft seat upholstery to ensure a high degree of comfort. Thanks to the easy-to-clean material, the backrest is also aailable in light colours, allowing high-contrast combinations with seat coers in a different shade. ID SOFT BACKREST Soft seat padding ensures superb comfort With its pleasantly padded backrest, ID Soft presents clean lines and geometric forms, which gie it an understated, sleek appearance. Thanks to its reductie aesthetic, ID Soft harmonises perfectly with a wide range of different architectural enironments. The backrest is height-adjustable and proides excellent support for the upper shoulder region. The support in the lumbar zone can be precisely adjusted to preent the pelis from tilting backwards. info@itra.com EN www.itra.com/idchair5
ID TRIM AND ID TRIM L ID Trim coneys a sense of classic elegance and quality craftsmanship. The self-supporting backrest construction consists of a fabric or leather coer stretched across the frame. The multi-chamber padding creates an upholstered effect with comfortable support. Supportie lumbar zone The interplay of the polyamide frame with the multi-chamber padding gies the backrest its three-dimensional range of moement. It adapts to the contours of the sitter's body and distributes arying degrees of fl exibility and support to the correct zones (3-zone comfort). 1. Support in the lumbar zone: integrated lumbar cushion with optional height adjustment for effectie support of the lower back. The lumbar cushion transitions smoothly into the fl exible middle zone. 2. Flexibility in the thoracic zone: reliees strain in the muscles and spinal discs and maintains the head and shoulders in an upright position. 3. Support in the shoulder zone: keeps the neck from hyperextending so the neck muscles stay relaxed. The neck region remains in its natural position, which helps to preent tension and strain. 6 info@itra.com EN www.itra.com/idchair
ID TRIM AND ID TRIM L ID Trim L proides additional support for the neck region and can also be used as an executie chair thanks to its high backrest. ID Trim and ID Trim L can be equipped with a clothes hanger info@itra.com EN www.itra.com/idchair7
ID MESH BACKREST ID Mesh with headrest and clothes hanger Three-dimensional Diamond Mesh coer fabric ID Mesh embodies technical transparency and lightness: fitted oer a slender frame, the innoatie spacer fabric has the translucent airiness of a net yet it's as soft as a slim cushion. This structure not only proides a comfortable upholstered effect, but also ensures pleasant entilation. The backrest consists of just two plastic parts: the frame and the adjustable lumbar support. This construction proides support in the lumbar region and flexibility for the upper back. ID Mesh can be outfitted with a clothes hanger and a headrest. 8 info@itra.com EN www.itra.com/idchair
FLOWMOTION MECHANISM Human beings hae a natural urge to moe een while seated. Ideally, an office swiel chair should not only offer freedom of moement but also encourage dynamic sitting habits. With this in mind, Vitra deeloped the FlowMotion mechanism. This patented mechanical unit supports the sitter across the full range of moement - the first to do so not merely when the user leans back but also when the seat is tilted forward. Nearly all functions can be adjusted while sitting in the chair, and just a few quick turns of an adjustment screw enable precision tuning from minimum to maximum resistance. Een if the settings are not optimally adjusted on occasion, the chair still retains its ergonomic properties. The functional features of the compact and robust FlowMotion mechanism come in four different combinations: with forward tilt and seat depth adjustment with forward tilt, without seat depth adjustment without forward tilt, with seat depth adjustment without forward tilt and without seat depth adjustment Seat height Backrest support Seat depth Forward tilt locking mechanism (horizontal) Backrest locking mechanism (upright) info@itra.com EN www.itra.com/idchair 9
USEFUL FACTS ABOUT THE FLOWMOTION MECHANISM The harmonious range of motion enabled by the FlowMotion mechanism encourages the user to deelop dynamic sitting habits. The adjustment options for the backrest resistance and the forward tilt function allow the user to assume any position between the maximally reclined lounging angle and the forward-tilted sitting posture, exploiting the full range of moement without physical exertion. The sitter enjoys unlimited freedom of moement but is supported by the chair at all times. Benefits of actie sitting: promotes spinal health by enhancing the supply of nutrients to ertebral discs. keeps the muscles supplied with oxygen, which helps to preent tension and strain. actiates circulation and supports inner organ function. This enhances the ability to concentrate and helps reliee physical tension and stress. The FlowMotion mechanism offers forward tilt adjusted to the user's weight. The ID Chair proides support in any position. Moement actiates the muscles and reliees pressure on the spinal discs. 10 info@itra.com EN www.itra.com/idchair
A study conducted by the Institute for Biomechanics at the Swiss Federal Institute of Technology Zurich (ETH) demonstrated that the chair's range of moement is fully utilised. This is an indication that the chair enables dynamic sitting. The forward tilt function gies users the same kind of experience as sitting on an exercise ball. EMG measurements hae shown that using the weightdependent forward tilt position increases muscle actiity in the stomach and back, which stabilises the lumbar ertebrae. Upright MRI, Zurich EMG (electromyography) MRI measurements hae proen that the forward tilt function triggers moement in all segments of the lower spine. This reliees pressure and enhances diffusion of nutrients to the ertebral discs. The actie preention of health problems can be reinforced by dynamic sitting, with the forward tilt position haing an especially positie effect. info@itra.com EN www.itra.com/idchair 11
PROMATIC MECHANISM The ProMatic mechanism was deeloped to satisfy the requirements of touchdown workstations, conference and meeting areas as well as workspaces where there is a desire for chairs with a minimal number of adjustment settings. Office life increasingly reoles around interaction and communication. Employees must be able to work with others in an interdisciplinary fashion, sharing knowledge and soling problems as a team. Work, conference and meeting functions oerlap and intermingle with eer greater frequency. Office furnishings need to respond to changing requirements with flexible, no-fuss solutions. These needs led to the deelopment of the ProMatic mechanism. Alongside the FlowMotion mechanism, it adds another functional feature to ID Chair's kit of modular options. It automatically adjusts to the user's weight - only the seat height needs to be set. Quick and simple handling saes time and preents users from making incorrect adjustments. Seat height Forward tilt locking mechanism (horizontal) Backrest locking mechanism (upright) 12 info@itra.com EN www.itra.com/idchair
ARMRESTS 3D ARMRESTS The 3D armrests feature adjustable height, width and depth and a 360 swiel function. The comfortable, soft armrest pads preent pressure points from forming. 2D ARMRESTS The 2D armrests are adjustable in height and width. The comfortable, soft armrest pads preent pressure points from forming. HEIGHT-ADJUSTABLE RING ARMRESTS The height-adjustable ring armrests in polished die-cast aluminium are ideally suited for conference enues. FIXED RING ARMRESTS The fixed ring armrests in polished die-cast aluminium proide an elegant, minimalist solution for conference settings. info@itra.com EN www.itra.com/idchair 13
COVER FABRICS Diamond Mesh 100% polyester 600 g/m² Diamond Mesh is a technical spacer fabric with a striking appearance and pleasant feel. It consists of polyester yarns interwoen into a honeycomb structure, which enhances thermal comfort for sitters. Diamond Mesh is robust and antistatic. Aailable in 9 colours. Silk Mesh Colour nero: 67% polyester, 33% polyamide other colours: 100% polyester 300 g/m² Silk Mesh is a technical spacer fabric with an elegant look and soft feel. It consists of polyester yarns that form a finely woen surface. Silk Mesh is easy to care for, durable, antistatic and breathable. Aailable in 9 colours. Plano 100% polyester 230 g/m² Plano is a robust and ersatile fabric suited to a wide range of applications, making it an ideal choice for office enironments. Due to the flat texture of the polyester weae, Plano has an understated appearance that is compatible with countless products. Aailable in 21 colours. Leather 1.1-1.3 mm thick, pigmented leather The standard grade leather used by Vitra is a robust leather, dyed-through, pigmented and embossed with an een grain pattern. It is highly durable and easy to maintain. Aailable in 7 colours. 14 info@itra.com EN www.itra.com/idchair
COVER FABRICS Twill 70% new wool, 30% polyamide Twill 325 g/m² The high percentage of natural fibres gies Twill ery pleasant tactile qualities and an initing, elegant appearance. Twill is extremely durable and has excellent abrasion resistance (min. 100,000 Martindale cycles, DIN EN ISO 12947-2). Aailable in 7 colours. CARE INSTRUCTIONS Vacuuming is sufficient for the remoal of dust and lint from upholstery fabrics. For the treatment of spots on coer fabrics and plastic surfaces, we recommend the use of a soft, damp cloth and a mild, neutral cleaning agent. Polished aluminium can be wiped with a normal glass cleaner and dried with a clean cloth. For the care of leather coers, please consult the instructions in the leather brochure included with the product. Further maintenance information can be proided by your Vitra sales representatie; the remoal of difficult stains should always be entrusted to an expert cleaning company. We recommend the use of enironmentally friendly cleaning agents as well as regular care of your furnishings and the prompt treatment of spots and stains. Before using a detergent or other cleaning agent, it is adisable to test it on a concealed area. Clima Seat The ID Chair with a Silk Mesh seat coer is optionally aailable with Clima Seat enhancement. The patented Clima Seat is a breathable fleece layer beneath the seat coer. It accelerates the eaporation of moisture on the seat and ensures comfort een during prolonged periods of sitting. By combining the excellent wicking properties of the Clima Seat with the breathability and other adantages of Silk Mesh, an extraordinary improement in oerall comfort can be achieed. info@itra.com EN www.itra.com/idchair 15
SUSTAINABLE QUALITY Vitra Test Centre All Vitra office chairs are subjected to rigorous testing, based on the parameters of 15 years of use, at the company's own Test Centre. Vitra carries out tests that go far beyond standard requirements, with an inspection catalogue comprised of the world's toughest tests (simulation of worst-case usage). Oer the years, Vitra has deeloped additional tests of its own that are not found in any official catalogue of standards. Blue Angel The ID Chair Concept bears the 'Blue Angel' enironmental label for low-emission upholstered furniture, which certifies that the manufacturing methods and materials of the product comply with guidelines for enironmental protection and consumer safety. The Blue Angel (1978) is one of the oldest enironmental labels. Greenguard The GREENGUARD label for indoor air quality (2001) recognises products that contribute to the creation of healthier indoor enironments. GS With the GS seal for tested safety, a state-authorised inspection institute certifies the suitability and safety of the construction and monitors production at regular interals. Ergonomics Approed The LGA certificate 'Ergonomics Approed' confirms the fulfilment of ergonomic requirements and testing criteria that exceed the minimum legal regulations for office swiel chairs. Bifma ID Chair fulfils the ANSI/BIFMA standard X5.1-2011, thus meeting the stringent safety requirements for the US market. 16 info@itra.com EN www.itra.com/idchair
GREEN USER AGREEMENT The long life of the ID Chair not only has a positie impact on the enironment, but is also of economic benefit to the customer. This is why Vitra goes beyond the legally mandated warranty to offer its project customers the Green User Agreement. Thanks to this sustainable serice agreement, companies are able to calculate the total cost of ownership for the entire lifespan of the product - i.e. all costs associated with usage as well as the purchase price. Year 1 The customer pledges to use and maintain the product in a proper manner. In return, Vitra agrees to replace ID Chairs free of charge in the case of manufacturing or material defects and to exchange worn parts. Year 5 Fie years after signing the Green User Agreement, a serice check is performed on the ID Chairs at the customer s premises. This extends the agreement for another fie years. Year 10 The next serice check is conducted. The Green User Agreement is extended by another fie years. Year 15 ID Chairs can now be returned to Vitra for professional recycling. The construction of ID Chairs uses the smallest possible number of components, and its constituent materials are easy to separate for subsequent recycling. The chairs are up to 95% recyclable and consist of up to 48% recycled materials. They hae been awarded the 'Blue Angel' seal for low-emission upholstered furniture and GREENGUARD certification for indoor air quality. All ID Chairs share the same technical platform, which greatly facilitates maintenance and sericing. Parts subject to wear are simple to replace, the backrest and seat can be disassembled without the need for special tools, and the seat coers are easy to remoe. info@itra.com EN www.itra.com/idchair 17
MODULAR SYSTEM Armrests 1. 3D armrests 2. 2D armrests 3. Ring armrests (height-adjustable) 4. Ring armrests (non-adjustable) Accessories 1. Headrest (for ID Mesh) 2. Clothes hanger (for ID Mesh) 3. Clothes hanger (for ID Trim and ID Trim L) 1 3 2 4 3 5 2 4 1 3 2 Mechanical unit a) FlowMotion without forward tilt, without seat depth adjustment b) FlowMotion with forward tilt, without seat depth adjustment c) FlowMotion without forward tilt, with seat depth adjustment d) FlowMotion with forward tilt, with seat depth adjustment e) ProMatic 1 1 2 Backrest 1. ID Air 2. ID Mesh 3. ID Soft 4. ID Trim 5. ID Trim L 3 Bases 1. Fie-star base, polished aluminium 2. Fie-star base, plastic in basic dark 3. Four-star base, polished aluminium (only with ProMatic) 18 info@itra.com EN www.itra.com/idchair
ID Air Antonio Citterio, 2012 ID Air with fixed ring armrests and back in basic dark ID Air with 2D armrests and back in soft light ID Air with fixed ring armrests and back in soft grey Office swiel chair with 2D or 3D armrests according to EN 1335, Ergonomic Seal of Approal. Mechanical unit: FlowMotion mechanism with or without synchronized forward tilt (can be disengaged), with or without seat depth adjustment. Indiidual adjustment of backrest resistance and forward tilt. Backrest: perforated plastic backrest in polypropylene (basic dark, soft grey or soft light). Armrests : Height and width-adjustable 2D armrests or height, width and depth-adjustable, 360 swiel 3D armrests. Armrest supports of polished aluminum. Armrest sleees of polyamide in basic dark or soft grey to match the frame color. The polyamide armrests with polyurethane padding come in two color options: basic dark on a basic dark frame, or dim grey on a soft grey frame. Also aailable are height-adjustable or fixed-height ring armrests of polished die-cast aluminum for the conference area. The ersion with height-adjustable ring armrests features polyamide armrest supports in basic dark or soft grey to match the frame color. Seat: polyurethane foam upholstery. Seat coers in fabric or in 3D spacer fabric. Base: fie-star base in polyamide (basic dark) or polished die-cast aluminum with double casters (Ø 2½") or glides. Optional: Silk Mesh seat coers are aailable with patented Clima Seat enhancement at additional cost for een longer sitting comfort. Upholstery: COM must be approed by customer serice before order acceptance, COM must be foam backed, see Annex. info@itra.com EN www.itra.com/idchair 19
DIMENSIONS (in accordance with EN 1335-1) 970-1085 38¼ -42¾ 500 19¾ 500-820 19¼ -32¼ 550 21¾ ID Air without armrests 970-1085 38¼ -42¾ 700-750 27½ -29½ 195-295 7 3 /4-11½ 500-820 19¼ -32¼ 550 21¾ ID Air with 2D armrests 970-1085 38¼ -42¾ 700-940 27½ -37 195-295 7 3 /4-11½ 500-820 19¼ -32¼ 550 21¾ ID Air with 3D armrests 970-1085 38¼ -42¾ 590 23¼ 190-255 7½ -10 500-820 19¼ -32¼ 550 21¾ 970-1085 38-42¾ 590 23 190-255 7½ -10 500-820 19¾ -32¾ 385 15 995 39¼ 590 23 190-255 7½ -10 445 17½ 500-820 19¾ -32¾ 430 17 380 15 ID Air with height-adjustable ring armrests 590 23¼ 500-820 19¾ -32¾ 590 23 500-820 19¾ -32¾ 590 23 500-820 19¾ -32¾ 430 17 970-1085 38-42¾ 220 8½ 550 21¾ 970-1085 38-42¾ 220 8½ 1000 39¼ 220 8½ 445 17½ 385 15 ID Air with fixed ring armrests H D I J Explanation Erklärungen of measurements Massangaben nach EN 1335-1 C B A A Seat Sitz height* belastet mit 64 kg D D Top Oberkante edge of backrest Rückenlehne E F B B Seat Sitztiefe depth aboe über seat Sitz surface* (belastet mit 64 kg) A C Sitzbreite E Armlehnenhöhe über Sitz C Seat width E Armrest height aboe seat surface* (belastet mit 64 kg) G *measured with 64 kg load F Höhe Height des of Rückenlehnenschildes (rear panel) backrest G Grösste Maximum Ausladung base radius des Untergestells H Total height H I Gesamthöhe Width of upper part I J Breite Depth Oberteil of upper part J Tiefe Oberteil 20 info@itra.com EN www.itra.com/idchair
SURFACES AND COLOURS 70 stone 71 maue grey 58 khaki 77 brick 57 dark blue 79 ice grey 80 coffee 84 poppy red/ champagne 67 cognac 86 dark blue/brown 82 grey/stone 85 yellow/mustard 72 poppy red 21 dim grey 54 brown 92 grey 68 aocado 07 orange 83 ice grey/brown 69 dark grey 66 nero Plano 24 soft grey 71 maue grey 01 light grey 79 ice grey 21 dimgrey 02 cognac 05 brown 68 aocado 67 asphalt 03 blue-grey 06 dark grey 77 brick 54 brown 66 nero 04 ink blue 07 black Silk Mesh Twill 30 basic dark 52 soft light 30 basic dark 03 aluminium polished 53 soft grey 53 soft grey 01 basic dark Backrest colour ID Air Frame Base info@itra.com EN www.itra.com/idchair 21
Article no. 09139108 22 Vitra is represented worldwide. Your local Vitra partner can be found at: www.itra.com. www.itra.com/idchair
ID Mesh Antonio Citterio, 2010 ID Mesh with headrest ID Mesh with 2D armrests ID Mesh with height-adjustable ring armrests Mechanical unit: FlowMotion mechanism with or without synchronized forward tilt (can be disengaged), with or without seat depth adjustment. Indiidual adjustment of backrest resistance and forward tilt. Backrest: backrest frame of polyamide in basic dark or soft grey with remoable, height-adjustable lumbar support. Backrest coer in the three-dimensional fabric Diamond Mesh in net look or Silk Mesh in closed look. With Silk Mesh in soft grey, aocado and ice grey, the back is soft grey. With Silk Mesh in brown, nero and asphalt, the back is nero. With Silk Mesh in maue grey, brick and dim grey, the back matches the frame color (soft grey or nero). Armrests : Height and width-adjustable 2D armrests or height, width and depth-adjustable, 360 swiel 3D armrests. Armrest supports of polished aluminum. Armrest sleees of polyamide in basic dark or soft grey to match the frame color. The polyamide armrests with polyurethane padding come in two color options: basic dark on a basic dark frame, or dim grey on a soft grey frame. Also aailable are height-adjustable or fixed-height ring armrests of polished die-cast aluminum for the conference area. The ersion with height-adjustable ring armrests features polyamide armrest supports in basic dark or soft grey to match the frame color. Seat: polyurethane foam upholstery. Seat coer in Plano or Twill fabric fabric or threedimensional Silk Mesh fabric. Base: fie-star base in polyamide (basic dark) or polished die-cast aluminum with double casters (Ø 2½ ) or glides. Accessories: a height and angle adjustable headrest of polyamide in basic dark or soft grey can be added at any time. With soft polyurethane padding in basic dark (with headrest in basic dark) or dim grey (with headrest in soft grey). A clothes hanger of polyamide in basic dark or soft grey is also aailable for later addition. Headrest and clothes hanger can be used separately or in combination. Upholstery: COM must be approed by customer serice before order acceptance, COM must be foam backed, see Annex. info@itra.com EN www.itra.com/idchair 23
DIMENSIONS (in accordance with EN 1335-1) 500 19¾ 500 19¾ 565-790 565-790 22¼ -31 22¼ -31 400-450 15¾ -17¾ 970-1095 38¼ -43 970-1095 38¼ -43 ID Mesh without armrests 700-750 700-750 27½ -29½ 27½ -29½ 565-790 565-790 22¼ -31 22¼ -31 400-450 15¾ -17¾ 970-1095 38¼ -43 970-1095 38¼ -43 195-295 7¾ -11¼ 400-520 195-295 15¾ -20½ 7¾ -11¼ 700-750 700-750 27½ -29½ 27½ -29½ 565-790 565-790 22¼ -31 22¼ -31 400-450 15¾ -17¾ 970-1095 38¼ -43 970-1095 38¼ -43 195-295 7¾ -11¼ 195-295 7¾ -11¼ ID Mesh with 2D armrests ID Mesh with 3D armrests 590 23¼ 565-790 22¼ -31 590 23¼ 565-790 22¼ -31 970-1095 38¼ -43 190-255 7½ -10 970-1095 38¼ -43 190-255 7½ -10 ID Mesh with height-adjustable ring armrests 590 23¼ 565-790 22¼ -31 590 23¼ 590 23¼ 565-790 22¼ -31 590 23¼ 605-760 23¾ -30 430 17 970-1095 38¼ -43 220 8½ 970-1095 38¼ -43 970-1095 38¼ -43 220 8½ 220 8½ 1000 39½ 220 8½ 445 17½ 380 15 ID Mesh with fixed ring armrests 1200-1325 47¼ -52¼ 590 23¼ 190-255 5½ -10 650-860 25½ -33¾ 400-520 7-9 275-320 10¾ -12½ 210 8 1 /4 320 12 1 /2 200-235 7 3 /4 170-320 6 3 /4-12 1 /2 435 17 1 /4 105 4 1 /4 140 5 1 /2 105 4 1 /4 ID Mesh with headrest and clothes hanger ID Mesh headrest ID Mesh clothes hanger H D I J Explanation Erklärungen of measurements Massangaben nach EN 1335-1 C B A A Seat Sitz height* belastet mit 64 kg D D Top Oberkante edge of backrest Rückenlehne E F B B Seat Sitztiefe depth aboe über seat Sitz surface* (belastet mit 64 kg) A C Sitzbreite E Armlehnenhöhe über Sitz C Seat width E Armrest height aboe seat surface* (belastet mit 64 kg) G *measured with 64 kg load F Höhe Height des of Rückenlehnenschildes (rear panel) backrest G Grösste Maximum Ausladung base radius des Untergestells H Total height H I Gesamthöhe Width of upper part I J Breite Depth Oberteil of upper part J Tiefe Oberteil 24 info@itra.com EN www.itra.com/idchair
SURFACES AND COLOURS 70 stone 71 maue grey 58 khaki 77 brick 57 dark blue 79 ice grey 80 coffee 84 poppy red/ champagne 67 cognac 86 dark blue/brown 82 grey/stone 85 yellow/mustard 72 poppy red 21 dim grey 54 brown 92 grey 68 aocado 07 orange 83 ice grey/brown 69 dark grey 66 nero Plano (seat only) 24 soft grey 68 aocado 21 dim grey / like frame colour 67 asphalt / nero 79 ice grey 77 brick 24 soft grey / soft grey 68 aocado / like frame colour 71 maue grey 67 asphalt 54 brown / nero 71 maue grey / soft grey 21 dim grey 54 brown 66 nero 66 nero / nero 77 brick / like frame colour 79 ice grey / soft grey Diamond Mesh Silk Mesh / rear side of back 01 light grey 02 cognac 05 brown 03 blue-grey 06 dark grey 30 basic dark 03 aluminium polished 04 ink blue 07 black 53 soft grey 01 basic dark Twill (seat only) Frame Base info@itra.com EN www.itra.com/idchair 25
Article no. 09139108 26 Vitra is represented worldwide. Your local Vitra partner can be found at: www.itra.com. www.itra.com/idchair
ID Soft Antonio Citterio, 2010 ID Soft with 3D armrests ID Soft with 2D armrests ID Soft with height-adjustable ring armrests Mechanical unit: FlowMotion mechanism with or without synchronized forward tilt (can be disengaged), with or without seat depth adjustment. Indiidual adjustment of backrest resistance and forward tilt. Backrest: Height adjustable polyamide backrest in basic dark or soft grey with poly-urethane foam upholstery and coer in Plano or Twill fabric or three-dimensional Silk Mesh fabric. Armrests : Height and width-adjustable 2D armrests or height, width and depth-adjustable, 360 swiel 3D armrests. Armrest supports of polished aluminum. Armrest sleees of polyamide in basic dark or soft grey to match the frame color. The polyamide armrests with polyurethane padding come in two color options: basic dark on a basic dark frame, or dim grey on a soft grey frame. Also aailable are height-adjustable or fixed-height ring armrests of polished die-cast aluminum for the conference area. The ersion with height-adjustable ring armrests features polyamide armrest supports in basic dark or soft grey to match the frame color Seat: polyurethane foam upholstery. Seat supports in basic dark polyamide for mechanism without height adjustable seat depth or sandblasted aluminum for mechanism with adjustable height and seat depth. Seat coer matches back coer in Plano or Twill fabric or in three dimensional Silk Mesh fabric. Base: fie-star base in polyamide (basic dark) or polished die-cast aluminum with double casters (Ø 2½ ) or glides. Upholstery: COM must be approed by customer serice before order acceptance, COM must be foam backed, see Annex. info@itra.com EN www.itra.com/idchair 27
DIMENSIONS (in accordance with EN 1335-1) 920-1100 36¼ -43¼ 510-570 20-22½ 500 16¾ 520-760 20½ -30 400-520 15 3 /4-20 1 /2 530-585 21-23 ID Soft without armrests 700-750 27½ -29½ 920-1100 36¼ -43¼ 510-570 20-22½ 195-295 7 3 /4-11½ 520-760 20½ -30 530-585 21-23 ID Soft with 2D armrests 700-940 27½ -37 920-1100 36¼ -43¼ 510-570 20-22½ 195-295 7 3 /4-11½ 520-760 20½ -30 530-585 21-23 ID Soft with 3D armrests 920-1100 36¼ -43¼ 510-570 20-22½ 590 23¼ 590 23¼ 920-1100 36¼ -43¼ 510-570 20-22½ 190-255 7½ -10 190-255 7½ -10 520-760 20½ -30 530-585 21-23 590 23¼ 590 23¼ 920-1100 36¼ -43¼ 510-570 20-22½ 920-1100 36¼ -43¼ 510-570 20-22½ 190-255 7½ -10 400-520 190-255 15¾ -20½ 7½ -10 520-760 20½ -30 530-585 21-23 590 23¼ 590 23¼ 950-1005 37½ 510-570 20-22½ 950-1005 37½ 510-570 20-22½ 190-255 7½ -10 560-730 560-730 22-28¾ 22-28¾ 430 17 430 17 450 190-255 17¾ 7½ -10 450 17¾ 530-585 21-23 530-585 21-23 380 15 380 15 ID Soft with height-adjustable ring armrests 920-1100 36¼ -43¼ 510-570 20-22½ 590 23¼ 220 8½ 520-760 20½ -30 530-585 21-23 920-1100 36¼ -43¼ 510-570 20-22½ 920-1100 36¼ -43¼ 510-570 20-22½ 590 23¼ 590 23¼ 220 8½ 520-760 520-760 20½ -30 20½ -30 400-450 15¾ -17¾ 220 8½ 530-585 21-23 530-585 21-23 950-1005 37½ 510-570 20-22½ 590 23¼ 220 8½ 560-730 22-28¾ 430 17 450 17¾ 380 15 530-585 21-23 ID Soft with fixed ring armrests H D I J Explanation Erklärungen of measurements Massangaben nach EN 1335-1 C B A A Seat Sitz height* belastet mit 64 kg D D Top Oberkante edge of backrest Rückenlehne E F B B Seat Sitztiefe depth aboe über seat Sitz surface* (belastet mit 64 kg) A C Sitzbreite E Armlehnenhöhe über Sitz C Seat width E Armrest height aboe seat surface* (belastet mit 64 kg) G *measured with 64 kg load F Höhe Height des of Rückenlehnenschildes (rear panel) backrest G Grösste Maximum Ausladung base radius des Untergestells H Total height H I Gesamthöhe Width of upper part I J Breite Depth Oberteil of upper part J Tiefe Oberteil 28 info@itra.com EN www.itra.com/idchair
SURFACES AND COLOURS 70 stone 71 maue grey 58 khaki 77 brick 57 dark blue 79 ice grey 80 coffee 84 poppy red/ champagne 67 cognac 86 dark blue/brown 82 grey/stone 85 yellow/mustard 72 poppy red 21 dim grey 54 brown 92 grey 68 aocado 07 orange 83 ice grey/brown 69 dark grey 66 nero Plano 24 soft grey 71 maue grey 01 light grey 79 ice grey 21 dimgrey 02 cognac 05 brown 68 aocado 67 asphalt 03 blue-grey 06 dark grey 77 brick 54 brown 66 nero 04 ink blue 07 black Silk Mesh Twill 30 basic dark 03 aluminium polished 53 soft grey 01 basic dark Frame Base info@itra.com EN www.itra.com/idchair 29
Article no. 09139108 30 Vitra is represented worldwide. Your local Vitra partner can be found at: www.itra.com. www.itra.com/idchair
ID Trim Antonio Citterio, 2010 ID Trim with four-star base and fixed ring armrests ID Trim with 3D armrests ID Trim with 3D armrests Mechanical unit: FlowMotion mechanism with or without synchronized forward tilt (can be disengaged), with or without seat depth adjustment. Indiidual adjustment of backrest resistance and forward tilt Backrest: polyamide frame in basic dark or soft grey. Optionally with height adjustable lumbar support. Leather, Plano fabric or Twill fabric coer. Armrests : Height and width-adjustable 2D armrests or height, width and depth-adjustable, 360 swiel 3D armrests. Armrest supports of polished aluminum. Armrest sleees of polyamide in basic dark or soft grey to match the frame color. The polyamide armrests with polyurethane padding come in two color options: basic dark on a basic dark frame, or dim grey on a soft grey frame. Also aailable are height-adjustable or fixed-height ring armrests of polished die-cast aluminum for the conference area. The ersion with height-adjustable ring armrests features polyamide armrest supports in basic dark or soft grey to match the frame color. Seat: polyurethane foam upholstery. Seat supports in basic dark polyamide for mechanism without height adjustable seat depth or sandblasted aluminum for mechanism with adjustable height and seat depth. Seat coer that matches the back coer in Plano fabric, Twill fabric or leather. Leather coers are not recommended for chairs with forward tilt because the user may slip out of the seat. Base: fie-star base in polyamide (basic dark) or polished die-cast aluminum with double casters (Ø 2½ ) or glides. Accessories: on request and for an extra charge, ID Trim is aailable with a coat hanger in basic dark or soft grey. Upholstery: COM must be approed by customer serice before order acceptance, see Annex. info@itra.com EN www.itra.com/idchair 31
DIMENSIONS (in accordance with EN 1335-1) 500 19¾ 500 19¾ 660-795 660-795 26-31¼ 26-31¼ 400-450 15¾ -17¾ 990-1100 39-43¼ 990-1100 39-43¼ 600 23½ 600 23½ ID Trim without armrests 700-750 700-750 27½ -29½ 27½ -29½ 660-795 660-795 26-31¼ 26-31¼ 400-450 400-450 15 3 /4-1715 3 /4 3 /4-17 3 /4 700-940 27½ -37 660-795 26-31¼ 400-450 15 3 /4-17 3 /4 990-1100 39-43¼ 990-1100 39-43¼ 195-295 7 3 /4-11½ 400-520 15 3 /4-20 1 /2 195-295 7 3 /4-11½ 400-520 15 3 /4-20 1 /2 600 23½ 600 23½ 990-1100 39-43¼ 195-295 7 3 /4-11½ 195-295 7 3 /4-11½ 600 23½ ID Trim with 2D armrests ID Trim with 3D armrests 990-1100 39-43¼ 590 23¼ 190-255 7½ -10 660-795 26-31¼ 400-450 15 3 /4-17 3 /4 600 23½ 990-1100 39-43¼ 590 23¼ 990-1100 39-43¼ 590 23¼ 190-225 7½ -10 400-520 15 3 /4-20 1 /2 190-225 7½ -10 660-795 26-31¼ 400-450 15 3 /4-17 3 /4 400-520 15 3 /4-20 1 /2 600 23½ 1020 40¼ 590 23¼ 190-255 7½ -25½ 700-765 26-30¼ 400-450 15 3 /4-17 3 /4 450 17¾ 380 15 600 23½ ID Trim with height-adjustable ring armrests 590 23¼ 660-795 26-31¼ 590 23¼ 660-795 26-31¼ 590 23¼ 700-765 27½ -30 430 17 990-1100 39-43¼ 220 8½ 600 23½ 990-1100 39-43¼ 220 8½ 600 23½ 1020 40¼ 220 8½ 450 17¾ 380 15 600 23½ ID Trim with fixed ring armrests 700-940 700-940 27½ -37 27½ -37 520-830 520-830 20½ -32 20½ -32 3 /4 3 /4 400-450 400-450 15 3 /4-17 3 /4 15 3 /4-17 3 /4 990-1100 39-43¼ 990-1100 39-43¼ 150-250 6-9¾ 400-520 15 3 /4-20 1 /2 150-250 6-9¾ 400-520 15 3 /4-20 1 /2 600 23½ 600 23½ 380 15 380 15 435 19 80 3 ID Trim with clothes hanger ID Trim clothes hanger H D I J Explanation Erklärungen of measurements Massangaben nach EN 1335-1 C B A A Seat Sitz height* belastet mit 64 kg D D Top Oberkante edge of backrest Rückenlehne E F B B Seat Sitztiefe depth aboe über seat Sitz surface* (belastet mit 64 kg) A C Sitzbreite E Armlehnenhöhe über Sitz C Seat width E Armrest height aboe seat surface* (belastet mit 64 kg) G *measured with 64 kg load F Höhe Height des of Rückenlehnenschildes (rear panel) backrest G Grösste Maximum Ausladung base radius des Untergestells H Total height H I Gesamthöhe Width of upper part I J Breite Depth Oberteil of upper part J Tiefe Oberteil 32 info@itra.com EN www.itra.com/idchair
SURFACES AND COLOURS 70 stone 71 maue grey 58 khaki 77 brick 57 dark blue 79 ice grey 80 coffee 84 poppy red/ champagne 67 cognac 86 dark blue/brown 82 grey/stone 85 yellow/mustard 72 poppy red 21 dim grey 54 brown 92 grey 68 aocado 07 orange 83 ice grey/brown 69 dark grey 66 nero Plano 72 snow 01 light grey 71 sand 67 asphalt 02 cognac 05 brown 69 marron 66 nero 03 blue-grey 06 dark grey 30 basic dark 03 aluminium polished 68 chocolate 70 red 04 ink blue 07 black 53 soft grey 01 basic dark Leather Twill Frame Base info@itra.com EN www.itra.com/idchair 33
Article no. 09139108 34 Vitra is represented worldwide. Your local Vitra partner can be found at: www.itra.com. www.itra.com/idchair
ID Trim L Antonio Citterio, 2010 ID Trim L with four-star base and fixed ring armrests ID Trim L with 3D armrests ID Trim L with 2D armrests and clothes hanger Mechanical unit: FlowMotion mechanism with or without synchronized forward tilt (can be disengaged), with or without seat depth adjustment. Indiidual adjustment of backrest resistance and forward tilt Backrest: polyamide frame in basic dark or soft grey. Optionally with height adjustable lumbar support. Leather, Plano fabric or Twill fabric coer. Armrests : Height and width-adjustable 2D armrests or height, width and depth-adjustable, 360 swiel 3D armrests. Armrest supports of polished aluminum. Armrest sleees of polyamide in basic dark or soft grey to match the frame color. The polyamide armrests with polyurethane padding come in two color options: basic dark on a basic dark frame, or dim grey on a soft grey frame. Also aailable are height-adjustable or fixed-height ring armrests of polished die-cast aluminum for the conference area. The ersion with height-adjustable ring armrests features polyamide armrest supports in basic dark or soft grey to match the frame color. Seat: polyurethane foam upholstery. Seat supports in basic dark polyamide for mechanism without height adjustable seat depth or sandblasted aluminum for mechanism with adjustable height and seat depth. Seat coer that matches the back coer in Plano fabric, Twill fabric or leather. Leather coers are not recommended for chairs with forward tilt because the user may slip out of the seat. Base: fie-star base in polyamide (basic dark) or polished die-cast aluminum with double casters (Ø 2½ ) or glides. Accessories: on request and for an extra charge, ID Trim is aailable with a coat hanger in basic dark or soft grey. Upholstery: COM must be approed by customer serice before order acceptance, see Annex. info@itra.com EN www.itra.com/idchair 35
DIMENSIONS (in accordance with EN 1335-1) 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 500 19¾ 500 19¾ 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 540-900 540-900 21¼ -35½ 21¼ -35½ 400-450 15¾ -17¾ 820-870 32¼ -34¼ 820-870 32¼ -34¼ ID Trim L without armrests 700-940 27½ -37 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 195-295 7 3 /4-11½ 540-900 21 1 /4-35 1 /2 400-450 15 3 /4-17 3 /4 820-870 32¼ -34¼ 700-940 27½ -37 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 195-295 7 3 /4-11½ 540-900 21 1 /4-35 1 /2 400-450 15 3 /4-17 3 /4 820-870 32¼ -34¼ ID Trim L with 2D armrests ID Trim L with 3D armrests 590 23¼ 590 23¼ 540-900 540-900 21¼ -35½ 21¼ -35½ 400-450 15¾ -17¾ 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 190-255 7½ -10 400-520 190-255 15¾ -20½ 7½ -10 820-870 32¼ -34¼ 820-870 32¼ -34¼ 590 23¼ 590 23¼ 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 190-255 7½ -10 400-520 190-255 15¾ -20½ 7½ -10 540-900 21¼ -35½ 820-870 32¼ -34¼ ID Trim L with height-adjustable ring armrests 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 590 23¼ 220 8½ 4 540-900 21¼ -35½ 820-870 32¼ -34¼ 1215-1385 47¾ -54½ 770-820 30¼ -32¼ 590 23¼ 220 8½ 540-900 21¼ -35½ 820-870 32¼ -34¼ 1245-1295 49-51 770-820 30¼ -32¼ 590 23¼ 220 8½ 580-870 22¾ -34¼ 430 17 450 17¾ 380 15 820-870 32¼ -34¼ ID Trim L with fixed armrests 700-940 27½ -37 1215-1385 47 3 /4-54 1 /2 770-820 30¼ -32¼ 150-250 6-9¾ 520-830 20½ -32 3 /4 400-450 15 3 /4-17 3 /4 380 15 820-870 32¼ -34¼ 435 19 80 3 ID Trim L with clothes hanger ID Trim clothes hanger H D I J Explanation Erklärungen of measurements Massangaben nach EN 1335-1 C B A A Seat Sitz height* belastet mit 64 kg D D Top Oberkante edge of backrest Rückenlehne E F B B Seat Sitztiefe depth aboe über seat Sitz surface* (belastet mit 64 kg) A C Sitzbreite E Armlehnenhöhe über Sitz C Seat width E Armrest height aboe seat surface* (belastet mit 64 kg) G *measured with 64 kg load F Höhe Height des of Rückenlehnenschildes (rear panel) backrest G Grösste Maximum Ausladung base radius des Untergestells H Total height H I Gesamthöhe Width of upper part I J Breite Depth Oberteil of upper part J Tiefe Oberteil 36 info@itra.com EN www.itra.com/idchair
SURFACES AND COLOURS 70 stone 71 maue grey 58 khaki 77 brick 57 dark blue 79 ice grey 80 coffee 84 poppy red/ champagne 67 cognac 86 dark blue/brown 82 grey/stone 85 yellow/mustard 72 poppy red 21 dim grey 54 brown 92 grey 68 aocado 07 orange 83 ice grey/brown 69 dark grey 66 nero Plano 72 snow 01 light grey 71 sand 67 asphalt 02 cognac 05 brown 69 marron 66 nero 03 blue-grey 06 dark grey 21 dim grey 68 chocolate 70 red 04 ink blue 07 black 66 nero Leather Twill Headrest, leather (with fabric coer) 30 basic dark 03 aluminium polished 53 soft grey 01 basic dark Frame Base info@itra.com EN www.itra.com/idchair 37
www.itra.com/idchair 38
www.itra.com/idchair 39
www.itra.com/idchair 40