Commercial Body Fittings 8th Edition

Similar documents
Centre Pillars & Sockets Self Colour or Zinc Plated. Retainer - Medium Duty Stainless Steel. Catch Plate - Surface Mounted Stainless Steel

Commercial Body Fittings 8th Edition. Underbody Access Step Galvanized 2-Rung, Heavy Duty. Frame: L595 x W350mm

Commercial Body Fittings 8th Edition. Door Hinge Raised Blade Zinc Plated & Stainless Steel. Door Hinge Raised Blade Zinc Plated & Stainless Steel

Handle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass

DOOR MECHANISMS. Commercial Body Fittings 7th Edition

D101 D103 D105. D Fender. 'Medium D' No. RUBF8033/565 wgt. 2.35kg L565 x W86 x D76mm No. RUBF8033 wgt kg L2550 x W86 x D76mm

Door, Hatch & Interior Fittings

XP 12 PLANS AND NOMENCLATURE

Quarter-turn locks, compression latches

Door Hinge (Raised Blade) Zinc Plated or Stainless Steel. No. HNVN7314/ZP wgt. 0.88kg Zinc plated mild steel c/w 304G Stainless steel pin

METLAM PARTITION HARDWARE. Metlam Partition Hardware. > Washroom Hardware & Accessories

XP 17 PLANS AND NOMENCLATURE

T&G SPARE PARTS CATALOGUE

General Equipment Marker Boards. Air Reservoirs. Chassis Components. Content - Section 10. Chassis Components

Product catalogue. Mechanical accessories for pumps and mixers

8.0. General Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0

INSTALLATION INSTRUCTIONS

Cabinet & Drawer Hardware

New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS

PRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD

1 cam motorcycle tie-down with Built-in Soft-Loop feature. Similar to Original Cam Tie-Down. Protects chrome & paint finishes. 5 1/2 ft.

CONTENTS. Gate Latches 3 Pool Latches 6 Gate Pins 7 Gate Handles 8 Hinges 9 Sliding Gate Hardware 10 Rail Brackets 12 Fence Tops 13 Posts & Caps 15

PXLS-7910 Half Rack. Olympic bar, weight plates and spring clip collars not included.

VOLKSWAGEN AMAROK 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

M4 x 14mm (x1) Silver Phillips Head Security Screw. Bolt Through Washers (x3)

Hanging Cabinets & Accessories

PART No: 04997, & PRODUCT: Body Harness MAKE & MODEL: TOYOTA 400A/125A KLUGER INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS PART NUMBER: CHEVROLET Camaro V8-6.2L

GRADE 2 ELEVATOR BOLTS* Inch Series STEEL ZINC STAINLESS. Weight/ Boxes/ Full Case. Full Case

The tonneau KING PRODUCT RANGE

DOORS. Odyssey 4SC doors

Commercial Body Fittings 8th Edition

22378 / / DRIP STANDS. Device cart. IV Stand for general medicine

HANG- EN SLUITWERK. Speciale producten 2. Reken op ons.

Espagnolette ASSA 550

Technical manual. Bure. Walker and Stand-aid with Power Rise Function Bure Rise & Go

KISS 450 PLANS AND NOMENCLATURE

The tonneau KING PRODUCT RANGE

Edition Subject to change without notice

RRAM PS RAM PS RAM PS RAM PS RAM PS B O N D E D F L O O R S B O N D F L O O R S. Safety Without 1 Compromise

Accessories may not be exactly as shown. KINGQUAD ATV LINEUP // KingQuad 750 & 500

VOLKSWAGEN AMAROK MY17> 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

WEDICO. `çãéäéíé=háí= q~êéjqçé=péãájqê~áäéê= Art.-No. 63

Runva winch catalogue 2012

Suction Spares and Accessories 2009

LENOXZLOCKER. Lenox Z Locker - Solid Plastic. Construction - Standard Features. Sizes. Doors and Frames. Sides, Tops, Bottoms, Dividers and Shelves

Event. Road construction. Event. Mobile fence. Building construction. Civil engineering. Storage equipment. Transport equipment

2014 Catalogue PDF - Available while new website is being updated. Trailer

Duct Rodder Accessories

About.

SITE FURNITURE GUIDE 2017

SITE FURNITURE GUIDE 2017

I Z E R W A R E. Chapter Three. Marine Door Holders, Door Stays, Door Stops and Door Closers. For Swinging Doors, Weather Doors And Interior Doors.

GOLD LINE QUALITY PARTS

SCANIA. Steering and Suspension Catalogue. Edition 1

FUEL STORAGE TRAILER ACCESSORIES

PROTECTING THE TOOLS OF YOUR LIVELIHOOD

LENOXLOCKER. Lenox Locker - Solid Plastic. Construction - Standard Features

Stainless Steel Products

Important Information

Waste Bins 5 ³ ² 5.1

D40C HINGE # x Support Plate x M8 Bolt 8 x M8 Washer 6 x M6 20mm Bolts 6 x M6 Washers 19 x Screws

The tonneau KING PRODUCT RANGE

General Equipment. Content - Section 8. Grease Nipples. Grease Equipment. Garage Equipment. Coils, Plugs & Sockets. Electrical Cable.

INSTALLATION INSTRUCTIONS

COMPONENTS AND ACCESSORIES FOR VAN AND CONTAINERS

Arena 330 Shipper Common Accessories Quick Reference Guide

SECTION 18 ENCLOSURES

13: Cargo Control. 13: Cargo Control

Model KD 710 KD 712 KD 714 Spare Parts List

Slam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon

Rotary heat exchanger EURA split rotor, sizes 50 53

BG 4 (A) BG 4 (A) BULLSEYE FAIRLEAD (Small) Base 26m. Screw hole pitch 15mm. Suitable for rope up to 6mm. Manufactured from black or white nylon.

Owners & Installation Manual

2013 Road King CVO FLHRSE5 Detachable Fairing w/ Garmin Zumo 665 Installation Instructions

PVC Couplings. Brass Couplings BRASS COMPRESSION COUPLING 3 -LENGTH PVC COMPRESSION COUPLING BRASS COMPRESSION COUPLING 5 -LENGTH

MH3. Door Stops (Floor Mounts) Door Stops (Wall Mounts) Door Holders (Door Mounts)

Roller runner systems FR

STORAGE OF HAZARDOUS GOODS PRODUCT RANGE

Price list January 2017 RRP

Rittal CM Compact System Enclosures

MAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

Tusk RZR Automatic Cam Chain Tensioner

CLAMPS FOR LIFTING PURPOSES

CARGO MANAGEMENT / CARGO CONTROL

Urban Rack. Basket Racks. Hard Top Carrier. Bike Racks. Made in the USA. Stainless Steel Deck Rack. Track Mounts. Gutter Mount Adapter

Q15P. Mitsubishi MQ Triton Dual Cab

AIR PREPARATION PRODUCTS

Kuhnke Technical Data. Contact Details

Check what you have received against the component checklist and hardware above.

CAM Lock Panels. Overview and Features. Features and Benefits. CAM Type. Clear Snap Back Cov- Cap & Lanyard. Double Set Screw.

SIDEWINDER 350 INSTALLATION INSTRUCTIONS & OPERATION MANUAL NOVEMBER 2011

Edition Subject to change without notice

THE NEW TS IT RACK 8

Weld-on Hinges Weld-on Hinges

Kuhnke Technical Data. Contact Details

HARDWARE TABLE OF CONTENTS

accessories TJMNIS001 PART NO: TJMTOY003B REVMS

Check what you have received against the component checklist and hardware above.

JdB cassette. Version 1.03 Sun Protection AVZ 3J.1

Transcription:

Commercial Body Fittings 8th Edition RETAINERS Retainer Heavy Duty 97 Retainer Heavy Duty 148 No. FRET180/HKZP wgt. 0.18kg l Suits No. FRET180/SMZP Plate: L76 x W45mm Hook: L97mm No. FRET190/HKZP wgt. 0.21kg l Suits No. FRET180/SMZP Catch Plate Surface Mounted Plate: L76 x W45mm Hook: L148mm No. FRET180/SMZP wgt. 0.03kg Plate: L76 x W45mm l Suits No. FRET180/HKZP & FRET190/HKZP Retainer Medium Duty Retainer Medium Duty No. FRET138/HKSS wgt. 0.07kg l Suits No. FRET138/SMSS Plate: L57 x W57mm Hook: L95mm No. FRET138/160SS wgt. 0.08kg l Suits No. FRET138/SMSS Catch Plate Surface Mounted Plate: L57 x W57mm Hook: L160mm No. FRET138/SMSS wgt. 0.04kg Plate: L63 x W50mm l Suits No. FRET138/HKSS & FRET138/160SS Retainer Medium Duty Catch Plate Surface Mounted No. FRET150/HKSS wgt. 0.07kg l Suits No. FRET150/SMSS Plate: L64 x W40mm Hook: L90mm Plastic housing: L64 x W60mm No. FRET150/SMSS wgt. 0.08kg l Suits No. FRET150/HKSS Plate: L78 x W45mm Plastic housing: L78 x W61mm Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 169

RETAINERS Commercial Body Fittings 8th Edition Wire Type Door Retainers No. FRET2603 wgt. 0.19kg Plastic coated zinc plated wire Wire: L260 x 03mm l Spring hook: 75mm zinc plated l 2 x Retaining staples, stainless steel No. FRET2603/260SS.Plastic coated stainless steel wire wgt. 0.19kg Wire: L260 x 03mm l Spring hook: 75mm stainless steel l 2 x Retaining staples, stainless steel No. FRET2603/360 Plastic coated zinc plated wire wgt. 0.20kg Wire: L360 x 03mm l Spring hook: 75mm zinc plated l 2 x Retaining staples, stainless steel No. FRET2603/260/WAO Plastic coated zinc plated wire wgt. 0.17kg Wire: L260 x 03mm l Spring hook: 75mm zinc plated l 1 x Retaining staple, stainless steel Staple only No. FRET2603/LSSS l Base: L69 x W20mm Self-Aligning Retainer White Plastic Retainer Staple, stainless steel FEMALE 260 / 360 FRET2603/LSSS Self-Algning Retainer Steel / FEMALE No. FRET3700/FWP wgt. 0.03kg No. FRET3700/MWP No. FRET3700/WPSET l Springs: Stainless steel Female Base: L65 x W29mm Adjustable Retainer White Plastic MALE Male Base: L65 x W29mm Female & Male set 1 x Female & 1 x Male FEMALE No. FRET3700/FZP wgt. 0.08kg No. FRET3700/MZP l Springs: Stainless steel MALE Female Base: L65 x W29mm Male Base: L65 x W29mm Adjustable Retainer Black Plastic FEMALE MALE MALE No. FRET555/F No. FRET555/M No. FRET555/MFSET wgt. 0.04kg Female Base: L63 x W25mm Male Base: L67 x W29mm Female & Male set 1 x Female & 1 x Male No. FRET555/F/BLK No. FRET555/M/BLK Female Base: L63 x W25mm Male Base: L67 x W29mm No. FRET555/MFSET/BLK Female & Male set wgt. 0.04kg 1 x Female & 1 x Male 170 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603

Commercial Body Fittings 8th Edition RETAINERS Retainer Set Rubber / Retainer Retainer Plastic / Rubber No. MRF405010602 wgt. 0.14kg Size: L143mm overall l Flexible rubber strap l Bracket, cam & retaining loop: 304 Grade stainless steel Check Strap Leather No. FRET450 wgt. 0.23kg Male/Female set l Male pin: L50 x 08mm l Hole centres: 54mm l Female socket complete with rubber insert l Hole centres: 70mm l 06.5mm Countersunk fixing holes Support Stay With Safety Catch Safety catch No. FRET475 Male/Female set l Male pin: H27 x 025mm l Female socket: H33 x 040mm l Rubber with steel base l 06.5mm Fixing holes Commercial Body Fittings reserve the right to alter and amend product specifications without prior notice. All specifications, weights and dimensions printed in this catalogue are intended as a guide only Any fixings therefore should not be determined until relevant goods are received on site. No. MISC25621 wgt. 0.32kg No. MISC300 wgt. 0.11kg l Size: L205 x W42mm l Hole centres: 72mm l Supplied with 2 x staples l Other sizes available upon request l Zinc plated / gold passivated finish l Suitable for top hinged doors and hatches l Locks in extended position l Length between fixing centres: Open: 470mm Closed: 285mm Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 171

RETAINERS 25 Bonnet Fastener Small 56 Commercial Body Fittings 8th Edition Bonnet Fastener Large 114 37 No. FRET5301 Complete fastener l Bracket & catch: Zinc plated l Rubber hook Lockable Trunk Fastener 95 No. FRET5300 wgt. 0.11kg l Bracket & catch: Zinc plated l Rubber hook Trunk Fastener 78 Complete fastener 2 x fixing holes (not shown) No. FTNK6127/8 wgt. 0.09kg l 05mm Fixing holes 42 Graveley Fastener Chromium Plated No. FTNK58 wgt. 0.04kg l 04.4mm Fixing holes 34 Small Graveley Fastener Chromium Plated No. FMSC53/F No. FMSC53/P 39 Fastener Base plate: L48 x W24mm Plate L48 x W24mm Large Graveley Fastener Chromium Plated No. FMSC2936/F No. FMSC2936/P wgt. 0.01kg Rubber Tension Strap 40 Fastener Base plate: L32 x W22mm Plate L47 x W23mm Stowage Clamp 40 No. FMSC2899/F wgt. 0.09kg No. FMSC2899/P wgt. 0.03kg 50 Fastener Base plate: L40 x W25mm Plate L64 x W27mm No. FTNK8150/ZP wgt. 0.14kg l Suitable for tool / utensil storage 172 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 150

Commercial Body Fittings 8th Edition RETAINERS QF Rubber Clamps PATENT PENDING QF Clamps are manufactured from heavy-duty UV resistant rubber, which is not affected by hot or cold climates. Great for use in a wide range of applications ranging from: Emergency vehicles, Tippers, ATV's, Electrical installations, Boats plus many more. Mini QF Clamp No. FRET/QF/1632/2 wgt. 0.06kg/pair l Supplied in pairs l Holds objects from 016 032mm l 1 Pair supports 23kg's l 4 x 05mm Fixing points per clamp Original QF Clamp No. FRET/QF/2557/2 wgt. 0.12kg/pair l Supplied in pairs l Holds objects from 025 057mm l 1 Pair supports 23kg's l 1 x 05mm Fixing points per clamp Go-Between QF Clamp No. FRET/QF/4473/1 wgt. 0.12kg each l Supplied individually l Holds objects from 044 073mm l 1 Clamp support 23kg's l 2 x 06mm Fixing points per clamp Super QF Clamp No. FRET/QF/64220/1 wgt. 0.14kg each l Supplied individually l Holds objects from 064 0220mm l 1 Clamp support 23kg's, 2 Clamps support 45kg's l 3 x 05mm Fixing points per clamp No. FRET/QF/381711/1 wgt. 0.23kg/pair l Supplied in pairs l 2 x 356mm Separate straps l Holds objects from 0381 0711mm l 1 Pair support 68kg's, 2 Pairs support 130kg's l 4 x 06mm Fixing points per clamp XL QF Clamp Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 173

RETAINERS Commercial Body Fittings 8th Edition Door Retainer Handed Right Hand Left Hand 320 No. FRET25987/LH wgt. 2.46kg No. FRET25987/RH wgt. 2.46kg Left hand Right hand l Body length: 465mm l Arm length: 320mm l 4 x 08mm fixing holes l Rubber door stop Door Retainer Universal / Gold Passivate Door Retainer Universal No. FRET37500 wgt. 2.30kg Universal l Body length: 465mm l Arm length: 370mm l 4 x 06mm fixing holes l Grease nipple l Suitable for both left hand & right hand fitment 370 No. MRF405030201 wgt. 2.50kg l Body length: 465mm l Arm length: 280mm l 4 x 06mm fixing holes l Suitable for both left hand & right hand fitment Universal 280 Door Retainer Universal Black Painted Door Retainer Universal Aluminium Body No. FRET46700/BLK wgt. 2.55kg l Body length: 335mm l Arm length: 430mm l 4 x 06.5mm fixing holes l Suitable for both left hand & right hand fitment Universal Square neck for positive locking 335 No. FRET631901/ALG Universal wgt. 1.89kg l Body length: 502mm l Arm length: 310mm l 4 x 08.5mm fixing holes l Suitable for both left hand & right hand fitment l Adjustable mounting brackets Adjustable mounting bracket 360⁰ rotation 310 44 174 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603

Commercial Body Fittings 8th Edition Cable Grips RETAINERS No. AMSC272/05 wgt. 0.01kg No. AMSC272/06 wgt. 0.01kg No. AMSC272/10 wgt. 0.06kg Part No. Pin 0 (mm) No. FRET28/150ZP wgt. 0.12kg No. FRET28/255ZP wgt. 0.19kg Suits 5mm cable Suits 6mm cable Suits 10mm cable Size H x W (mm) 150mm 255mm No. FRET28/300ZP 300mm wgt. 0.21kg l Complete with staple l 06.5mm Fixing holes Wgt (kg) AMSC37/06 6mm 26 x 13 0.02 AMSC37/08 8mm 34 x 16 0.05 AMSC37/10 10mm 37 x 19 0.10 AMSC37/11 11mm 43 x 22 0.15 AMSC37/12 12mm 47 x 25 0.20 'D' Shackle screwed pin Mild Steel No. FRET28/S l Staple only Cabin Hook STAPLE ONLY Cabin Hook Galvanized Size: L43 x W42mm H W Pin 0 150/255/300 No. FRET28/150GV wgt. 0.12kg No. FRET28/255GV wgt. 0.19kg l Complete with staple l 06.5mm Fixing holes 150mm 255mm Cabin Hook 304G 150/255 150 No. FRET28/150SS 150mm wgt. 0.12kg l 304G Stainless steel l Complete with staple l 06.5mm Countersunk fixing holes l Corrosion resistant Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 175

RETAINERS Commercial Body Fittings 8th Edition Epoxy Black Powder Coated No. FHSP4507/150 wgt. 0.55kg l Hasp: L55 x W68 x D4.5mm l Staple: L65 x W54mm l 06mm Countersunk fixing holes 55 Epoxy Black Powder Coated 68 96 151 56 No. FHSP4195/150 wgt. 0.55kg 99 l Staple: L64 x W55mm l 05.8mm Countersunk fixing holes 48 Black Painted 7.9 x 7.9 Fixing holes No. FHSP4196/125 wgt. 0.24kg 120 48 l Staple: L39 x W39mm l 7.9mm Square fixing holes No. FHSP4196/S Staple only Galvanized 31 62 7.9 x 7.9 Fixing holes Staple 120 48 No. FHSP4196/125GV wgt. 0.24kg 62 l Staple: L39 x W39mm l 7.9mm Square fixing holes 31 No. FHSP617/75ZP wgt. 0.11kg No. FHSP617/115ZP wgt. 0.15kg No. FHSP617/150ZP wgt. 0.18kg No. FHSP617/S Size: L75 x D40mm Size: L115 x D40mm Size: L150 x D40mm Staple only 176 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 40 26/56 75/115/150 Staple