Hand Valve VH Series VH0 Specifications VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa 5 to C (No freezing) 90 Not required (Use turbine oil Class ISO VG, if lubricated.) VH0 Model Series VH Port size / VH0 Number of positions (Closed center) (Exhaust center) (Position) (Closed center) (Exhaust center) VH0 VH0 Piping direction The value in brackets refers to the port size. Model Flow rate characteristic Body Panel (P) (A)/(B) (A)/(B) (R) mount mount C[dm /(s bar)] b Cv C[dm /(s bar)] b Cv VH00-0 VH0-0 VH0-0 VH-0 VH0-0 VH-0.5.5 VH0-0 VH50-0 VH-0 VH5-0 Weight (kg) 0. (Position) VH-0 VH5-0 (Closed center) VH0-0 VH0-0 (Exhaust center) VH-0 VH-0. 0.. 0. (Position) VH-0 VH-0 C VH VH VH6 696 (Closed center) (Exhaust center) (Position) /, /8 (Closed center) (Exhaust center) (Position) (Closed center) (Exhaust center) (Position) / to / (Closed center) (Exhaust center) (Position) (Closed center) /, (Exhaust center) (Position) VH00-0/0 VH0-0/0 5.(/) VH0-0/0 VH-0/0 6.(/8) VH0-0/0 VH-0/0 VH0-0/0 VH0-0/0.5(/) VH-0/0 VH-0/0 5.(/8) VH-0/0 VH-0/0 VH00-0 to 06 VH0-0 to 06.(/) 5.6(/8) VH0-0 to 06 VH-0 to 06 7.5(/) VH0-0 to 06 VH-0 to 06 8.(/) VH0-0 to 06 VH0-0 to 06.9(/).0(/8) VH-0 to 06 VH-0 to 06.6(/) VH-0 to 06 VH-0 to 06 5.(/) VH0-06/0 7(/) VH-06/0 8.8() VH-06/0 0. 0..5(/) 5.(/).5(/8) 6.(/8).(/).5(/).(/8) 5.(/8).(/).(/).8(/8) 5.6(/8).(/) 7.5(/).5(/) 8.(/).9(/).9(/).(/8).0(/8).5(/).6(/).7(/) 5.(/) 0.(/) 7(/) () 8.8() 0. 0..5(/).5(/8).(/).(/8).(/).8(/8).(/).5(/).9(/).(/8).5(/).7(/) 0.(/) ().8 9.7
Hand Valve VH Series How to Order Symbol 0 5 Symbol position method Body Panel mount Body Panel mount Body Panel mount (B) Closed center (B) (A) Exhaust center (B) (A) (A) Hand valve Body size (Base size) / base /8 base / base 6 base Piping/ Note) Piping VH VH VH VH6 VH 0 Note) For VH0, (R) port is located only on the bottom. Flow Rate Characteristics VH00 Valve output pressure MPa.0 0. 0. 0. 0. Function 0 0. 0. 0. 0. Suffix symbol Symbol Description Nil L VH00 C[dm /(s bar)].5 C[dm /(s bar)].5 Supply pressure MPa.0 Supply pressure MPa.0.0 Valve output pressure MPa 0 00 00 0 800 000 0 R Made to Order Nil Standard X6 Handle (Red) Standard Long handle Handle position 80 change 0. 0. 0. 0. 0. 0. 0. Body size VH VH VH VH6 When specifying more than one option, indicate symbols alphabetically. Note that (P) port of VH0 is located on handle side as standard. Port size (Nominal size) Symbol Port size Body size (Nominal size) VH VH VH VH6 0 0 0 06 0 / /8 / / position closed center position exhaust center position Thread type Nil Rc N NPT F G 0. 000 000 VM VMG VR VR5 VHK VH VHS VHS Handle Operation Angle and Air Flow Direction (Refer to the figures of piping direction to the right.) Flow direction (A) position position Flow Flow direction direction N (B) (A) 90 5 5 Flow direction (B) VH00 Valve output pressure MPa Flow rate (L/min (ANR)) VH0 C[dm /(s bar)].9 C[dm /(s bar)] 8.8 Supply pressure MPa.0 Supply pressure MPa.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. Valve output pressure MPa Flow rate (L/min (ANR)) 0 000 000 00 0 5 0 5 Flow rate (L/min (ANR)) Flow rate (m /min (ANR)) 697 B
VH Series Construction VH00 i r e t u o q y!0 w VH00/00 i u o y r e q!0 t w VH0 q w Component Parts No. Cover Body Description Replacement Parts Description Maintenance and repair kit Handle head assembly Handle head assembly No. 5 6 7 8 9 6 7 8 9 0 Material VH00/00/00 Zinc die-casted Aluminium die-casted Component parts Slide ring Slide ring spring O-ring Handle head Spring Pin Steel ball Handle head Spring Pin Steel ball Handle VH0 Cast iron Cast iron Standard Handle 0 Long type Red Note) Replacement parts for the VH0 series are not available. Including grease. 698 Part no. Material VH00 VH00 VH00 Resin Piano wire KT-VH-N KT-VH-N KT-VH-N NBR Zinc alloy Piano wire Structural steel 0A A A SUJ Zinc alloy Piano wire Structural steel 06A 5A 5A SUJ 0 05 0 7 05 0 05 Part No. of Lock Nut for Panel Mount Series Part no. VH00 00 VH00 8 VH00 058 Note) Not applicable to the VH0 series.
ø ø Hand Valve VH Series Dimensions VH0/-0 VH/5-0 6 9 6 9 5 x ø5.5 9 5 9 M x.5 Width across flats Thickness 6 pin height 7 N x ø5.5 9 5 9 (.5) 90 M x.5 Width across flats Thickness 6 (.5) pin height 90 5 5 x / R Panel cut dimension +0. x øa 0 (For positioning) øc 0 + B ±0. 7 VH/-0 (Bottom ported) x / ø5. VM VMG VR VR5 VHK x / VH VHS VHS Max. panel thickness D VH00 VH00 VH00 A... B 0 5 6 C 5 5 (mm) D.5 6 8 699 B
ø Hand Valve VH Series Dimensions VH0/-0 to 0 ( ): Long handle type 7 6 x ø6.6 6 (59) 97() 88.5 M0 x.5 Width across flats 50 Thickness 8 (.5) pin height 05(09) 7.5 VH/-0 to 0 (Bottom ported) x /, /8 ø 56 VM VMG VR VR5 VHK VH VHS VHS x /, /8 Refer to page 699 for the panel cut dimension. 699- B
P A R ø VH Series Dimensions VH0/-0 to 0 VH0/-06 ( ): Long handle type ( ): Long handle type 0 89 0 88 x ø6.6 8 9 (9) 97(5) ø 05.5 M50 x.5 Width across flats 6 Thickness 8 (0) 07.5 M50 x.5 Width across flats 6 Thickness 8 7 65 5 9 x ø6.5 88 (9) 97(5) (.5) pin height (.5) pin height () 67 x /, /8, / x / VH/-0 to 0 (Bottom ported) VH/-06 (Bottom ported) ø6 ø5 ø86 B x /, /8, / x / Refer to page 699 for the panel cut dimension. B 700
Hand Valve VH Series Dimensions: Body Mount VH0-06/0 5 N ø x ø 00 VM ø5 VMG VR 50 5 VR5 VHK 8 VH 5 x Rc/, 76 VHS VHS 0 70
VH Series Specific Product Precautions Be sure to read this before handling the products. Refer to back page 50 for Safety Instructions and pages to 9 for //5 Port Solenoid Valve Precautions. Warning Warning Design. Not suitable for use as a selector valve or a divider valve. The valve can malfunction due to air leakage.. Not suitable for negative pressure. The valve can malfunction due to air leakage.. Do not supply air pressure from other ports than (P) port. Air leakage may occur when the pressure is supplied from other ports. Selection. Intermediate stop When stopping the cylinder piston in the middle using the position closed center valve, it is not possible to stop it correctly and precisely as the hydraulic equipment due to the air compressibility. Do not use this valve because it has slight air leakage and can not hold a stopping position. When it is necessary to hold a stopping position, select an equipment to prevent displacement and design the circuit. Caution Warning Piping. Ensure connection so that air is supplied to the port (P) port. Air leakage may occur when the pressure is supplied from other ports. Environment. When the valve is exposed to a large amount of dust, install a silencer into the port (R). When dust enters the valve from the port (R), it may cause air leakage. Caution. Use in low temperature environments The valve can be used at a temperature down to 5 C. Take appropriate measures to avoid freezing of drainage, moisture, etc.. Operation method The valve must be switched to each position instantly and securely. Stopping the handle halfway between the extreme positions may cause malfunction.. Switch the valve by hand If a hammer or other tools are used, or it is operated mechanically through the use of a cylinder or the like, damage could result. 70
Contact our sales office for delivery dates and prices as this is a special model. Specialized Product P.G. Point to Group information Hand Valve with Lock Mechanism VH mm/ mm/ mm- m-x56 Features Provided with handle lock mechanism. Hand valve has a structure in which the handle does not move without pushing the lock lever. This prevents change-over due to accidental operation. Lock lever Handle Lock lever Port size x /, /8, / Push the lock lever and Handle operation becomes possible! * Operate the handle with the lock lever pushed. Unlocked Specifications The flow rate characteristics are the same as the standard product. Refer to the Web Catalog. Fluid Air Proof pressure.5 MPa Max. operating pressure.0 MPa Ambient temperature and operating fluid temperature 5 to C (No freezing) Operating angle 90 Caution To ensure the safest possible operation of this product, please be sure to thoroughly read the Safety Instructions in our Best Pneumatics catalog before use. 06 SMC Corporation All Rights Reserved --, SOTO-KANDA, CHIYODA-KU, TOKYO 0-00, JAPAN URL: http://www.smcworld.com SP6X-005E P: UX
Hand Valve with Lock Mechanism VHmm/mm/mm- m-x56 Specialized Product Point to Group P. G. information How to Order VH 0 0 X56 Body size / base /8 base / base Handle position Nil Symbol method Piping Piping/ VH VH VH R 0 Body Panel mount 0 -position closed center 5 5 (A) N (B) -position exhaust center 5 * For VHmm, (R) port is located on the bottom. (A) Switching method (B) (A) (B) (A) N 5 (B) Port size Symbol Port size Body size VH VH VH 0 / V V V 0 /8 V V 0 / V Thread type Nil Rc N NPT F G -position (A) 90 (B) (B) (A)
Hand Valve with Lock Mechanism VHmm/mm/mm- m-x56 Specialized Product Point to Group P. G. information Dimensions [mm] VHmm-0 (For the -position type) (6.5) (95.5) (9) DIA. 5 (P) P 6 x / 6 VHmm-0 to 0 (For the -position type) (5.5) (98.5).5 (0) ø 56 7 7 7.5 x /