Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C Liquid temperature during operation: C Density: 998. kg/m³ Technical: Actual calculated flow: Resulting head of the pump: Primary shaft seal: Approvals on nameplate: Curve tolerance: Materials: Pump housing: Impeller: Bush material: 17.1 m³/h 78.1 m HQQE CE,TR ISO99:1 3B Cast iron EN-JL13 ASTM A8-3 B Stainless steel DIN W.-Nr. 1.31 AISI 3 NONE Installation: Maximum ambient temperature: C Max pressure at stated temp: 1 bar / 1 C 1 bar / - C Flange standard: DIN Pipe connection: DN 5 Pressure rating: PN 1 Flange size for motor: FF5 Electrical data: Motor type: IE Efficiency class: Rated power - P: 13SC IE3 5.5 kw Printed from Grundfos Product Centre [18.5.] 1
Position Qty. Description Power (P) required by pump: 5.5 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-15D V Rated current: 11 A Starting current: 18-118 % Cos phi - power factor:.87-.8 Rated speed: 9-9 rpm Efficiency: IE3 89,% Motor efficiency at full load: 89. % Motor efficiency at 3/ load: 9. % Motor efficiency at 1/ load: 89. % Number of poles: Enclosure class (IEC 3-5): 55 Dust/Jetting Insulation class (IEC 85): F Others: Minimum efficiency index, MEI :.7 Net weight: 9 kg Gross weight: 11 kg Shipping volume:.3 m³ Date: 3/3/17 Printed from Grundfos Product Centre [18.5.]
On request CR 15-7 A-F-A-E-HQQE 5 Hz Date: 3/3/17 H [m] 1 CR 15-7, 3* V, 5Hz Q = 17.1 m³/h H = 78.1 m n = 933 rpm Pumped liquid = Water Liquid temperature during operation = C Density = 998. kg/m³ eta [%] 9 8 7 5 1 8 3 1 Eta pump = 71.7 % Eta pump+motor =. % 8 1 1 1 1 18 Q [m³/h] P [kw] 7 1 NPSH [m] P1 1 5 P 1 8 3 1 P1 = 5.8 kw P = 5.95 kw NPSH = 1. m Printed from Grundfos Product Centre [18.5.] 3
x ø13.5 3 5 ø5 15 G ø18.1 1/ 3 13 17 13 Description Value General information: Product name: CR 15-7 A-F-A-E-HQQE Product No: On request EAN number: On request Technical: Actual calculated flow: 17.1 m³/h Resulting head of the pump: 78.1 m Head max: 98.5 m Stages: 7 Impellers: 7 Primary shaft seal: HQQE Approvals on nameplate: CE,TR Curve tolerance: ISO99:1 3B Pump version: A Model: A Materials: Pump housing: Cast iron EN-JL13 ASTM A8-3 B Impeller: Stainless steel DIN W.-Nr. 1.31 AISI 3 Material code: A Code for rubber: E Bush material: NONE Installation: Maximum ambient temperature: C Max pressure at stated temp: 1 bar / 1 C 1 bar / - C Flange standard: DIN Pipe connection: DN 5 Pressure rating: PN 1 Flange size for motor: FF5 Connect code: F Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C Liquid temperature during operation: C Density: 998. kg/m³ Electrical data: Motor type: 13SC IE Efficiency class: IE3 Rated power - P: 5.5 kw Power (P) required by pump: 5.5 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-15D V Rated current: 11 A Starting current: 18-118 % Cos phi - power factor:.87-.8 Rated speed: 9-9 rpm Efficiency: IE3 89,% Motor efficiency at full load: 89. % Motor efficiency at 3/ load: 9. % Motor efficiency at 1/ load: 89. % Number of poles: Enclosure class (IEC 3-5): 55 Dust/Jetting Insulation class (IEC 85): F Motor protec: PTC Date: 3/3/17 391 77 H [m] 1 9 8 7 5 3 CR 15-7, 3* V, 5Hz Q = 17.1 m³/h H = 78.1 m n = 933 rpm Pumped liquid = Water Liquid temperature during operation = C Density = 998. kg/m³ 1 Eta pump = 71.7 % Eta pump+motor =. % 5 1 15 Q [m³/h] P [kw] 9 5 3 1 13 13 17 3 TO AMPLIFIER RELAY TO AMPLIFIER RELAY +T L1 L 3 ø18.1 +T +T +T L1 L L3 +T +T L3 ø5 15 5 IEC TP11 THERMALLY PROTECTED WHEN THE THERMISTORS ARE ø15 CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY ø15 x ø13.5 THERMISTORS PTC ACCORDING TO DIN 8 P1 P P1 = 5.8 kw P = 5.95 kw NPSH = 1. m 8 eta [%] 1 1 1 8 NPSH [m] Printed from Grundfos Product Centre [18.5.]
Description Value Motor No: 85U1717 Others: Minimum efficiency index, MEI :.7 Net weight: 9 kg Gross weight: 11 kg Shipping volume:.3 m³ Date: 3/3/17 Printed from Grundfos Product Centre [18.5.] 5
On request CR 15-7 A-F-A-E-HQQE 5 Hz Date: 3/3/17 cos phi eta CR15-7 + 13SC 5.5 kw 3* V, 5 Hz I [A] cos phi eta.8 1 I. 1. 8. P = 5.95 kw cos phi =.8 Eta = 89.9 % I = 9.75 A..5 1. 1.5..5 3. 3.5..5 5. 5.5..5 7. P [kw] n P1 [rpm] 3 P1 [kw] 3 n 8 P1 = 5.8 kw n = 933 rpm Printed from Grundfos Product Centre [18.5.]
On request CR 15-7 A-F-A-E-HQQE 5 Hz Date: 3/3/17 13 391 3 77 ø18.1 9 ø15 ø15 13 17 3 15 5 ø5 x ø13.5 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos Product Centre [18.5.] 7
On request CR 15-7 A-F-A-E-HQQE 5 Hz Date: 3/3/17 +T +T +T TO AMPLIFIER RELAY +T TO AMPLIFIER RELAY L1 L L3 +T +T L1 L L3 IEC TP11 THERMALLY PROTECTED WHEN THE THERMISTORS ARE CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY THERMISTORS PTC ACCORDING TO DIN 8 Note! All units are in [mm] unless others are stated. Printed from Grundfos Product Centre [18.5.] 8