AUTHORIZED DISTRIBUTOR LIST - IF APPLICABLE RESPONDER'S NAME: Cargill, Incorporated - Deicing Technology Business Unit - AccuBrine SWIFT EVENT NUMBER: G0210-2000001031 Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will provide the required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions before any State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor location number and the vendor location number, i.e., 0000123456-001. COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET/CITY/ZIP STATE NUMBER NAME Cargill, Incorporated - Deicing Technology Business Unit 0000211244-002 24950 Country Club Blvd. Suite 450 OH 952-448-6808 Jim Anderson North Olmsted, 44070 Ironhawk Industrial Distribution 0000804269-001 2000 Auburn Drive Ste. 200 OH 216-378-7613 Pat Gavin Beachwood, OH 44122
STATE OF MINNESOTA PRICING PAGE 1 of 1 Price quote for: SALT BRINE PRODUCTION SYSTEM Vendor Name: Cargill Deicing Technology Contact Person: Jim Anderson Street Address: 967 Sunny Ridge Drive P.O. Box: City, State, Zip Carver, MN 55315 Phone #: 852-448-6808 Toll Free #: Fax #: 440-716-0550 Email Address: jim_a_anderson@cargill.com Make Model Cargill AccuBrine ABM Spec # Information Requested Answer Price for Base Unit: $54,948.00 1.0 Salt Brine Production System System Operating Voltage 220 Volts single phase @ 30 AMPS Brine Tank Holding Capacity 1200 gallon, plus a 12" x 12" Brine Tank Material Tank Wall Thickness Hopper Holding Capacity Hopper Material Hopper Wall Thickness Containment System Holding Cap. Containment System Wall Thickness Pump Capacity in GPM Electric Motor H.P. Fiberglass with ceramic coating.35" &.50" thick 5 cubic yards Fiberglass with ceramic coating.35" &.50" thick NA NA 107 GPM 3 HP Water In-feed Pipe Size Up to 2" System Production Cap. In GPH Warranty 5000 GPH 1 Year
Carver, MN 55315 952-448-6808 SALT BRINE PRODUCTION SYSTEM Cargill Deicing Technology Jim Anderson 967 Sunny Ridge Drive 440-716-0550 jim_a_anderson@cargill.com Make Model Cargill AccuBrine ABM Spec # Description QTY Price 1.0 Base Price $54,948.00-2.0 Hose Options NA 3.0 Installation & Set-up Cost 3.1 Basic installation include in Base Price to include: Place control panel and secure to floor or pad provided by customer. Connect to customer supplied 2" water supply with back flow preventer, (water supply to be within 10' of control panel). Place salt tank into position with assistance of customer. Install flex hose from control panel to salt tank (salt tank to be within 15' of control panel). Connect electrical plug into supplied outlet (requires L14-30R outlet). Install flex hose to customer supplied storage tank fitting (must be within 4' of control panel). Start up brine maker and test all functions. Train customer on all functions. Install single transducer in customer storage tank (customer to supply wiring and conduit to and from control panel to tank. No installation of through wall manifolds are included in basic installation. - 3.2 Installation of all other items not covered in item 3.1 Price Per Hour plus materials (price per person). $150.00-4.0 Additional Options. Use this section to list any additional options not listed above. 4.1 300 GPM pump kit to include: Pump with independent motor control 3 phase system. Over load protection. Starter and circuit breaker. Installation is priced per hour, see item 3.2 $6,770-4.2 In line heater option to include: In line heater. Heating elements. Control system. Requires customer to supply separate electrical hook up. Installation is priced per hour, see item 3.2. $6,360-4.3 Recycled water kit to include: 100 GPM pump. Motor starter circuitry. Three way valve. Level sensor. Hose barbs and logic control. Fittings for splitting dilute water. Installation is priced per hour, see 3.2. $5,990-4.4 2" Storage tank fitting kit to include: 2" tank flange, 2" ball valve, manifold hose barbs, clamps and gaskets. $320 4.5 3" Storage tank fitting kit to include: 3" tank flange, 3" ball valve, manifold hose barbs, clamps and gaskets. $600 5.0 Delivery Fill in starting point and cost per loaded mile. City/State/Zip Code
5.1 100 Northeast Drive, Loveland, OH 45140-7144 NO CHARGE 6.0 NEW EQUIPMENT RENTAL PROGRAM NA 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM NA 8.0 Equipment Inspection & Repair NA Total Cost -
Price quote for: SALT BRIN Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Cargill Deicing Technology Jim Anderson 967 Sunny Ridge Drive Carver, MN 55315 852-448-6808 440-716-0550 jim_a_anderson@cargill.com Make Model Spec # Information Requested Price for Base Unit: 1.0 Salt Brine Production System System Operating Voltage Brine Tank Holding Capacity Brine Tank Material Tank Wall Thickness Hopper Holding Capacity Hopper Material Hopper Wall Thickness Containment System Holding Cap. Containment System Wall Thickness Pump Capacity in GPM Electric Motor H.P. Water In-feed Pipe Size System Production Cap. In GPH Warranty
NE PRODUCTION SYSTEM Cargill AccuBrine RTF Answer $70,648.00 220 Volts single phase @ 30 AMPS 1200 gallon, plus a 12" x 12" Fiberglass with ceramic coating.35" &.50" thick 5 cubic yards Fiberglass with ceramic coating.35" &.50" thick NA NA 107 GPM 3 HP Up to 2" 5000 GPH 1 Year
SALT BRINE PRODUCTION SYSTEM Cargill Deicing Technology Jim Anderson 967 Sunny Ridge Drive Carver, MN 55315 952-448-6808 440-716-0550 jim_a_anderson@cargill.com Make Model Cargill AccuBrine RTF Spec # Description QTY Price 1.0 Base Price $70,648.00 2.0 Hose Options NA 3.0 Installation & Set-up Cost 3.1 Basic installation include in Base Price to include: Place control panel and secure to floor or pad provided by customer. Connect to customer supplied 2" water supply with back flow preventer, (water supply to be within 10' of control panel). Place salt tank into position with assistance of customer. Install flex hose from control panel to salt tank (salt tank to be within 15' of control panel). Connect electrical plug into supplied outlet (requires L14-30R outlet). Install flex hose to customer supplied storage tank fitting (must be within 4' of control panel). Start up brine maker and test all functions. Train customer on all functions. Install single transducer in customer storage tank (customer to supply wiring and conduit to and from control panel to tank. No installation of through wall manifolds are included in basic installation. 3.2 Installation of all other items not covered in item 3.1 Price Per Hour plus materials (price per person). $150.00 4.0 Additional Options. Use this section to list any additional options not listed above. 4.1 300 GPM pump kit to include: Pump with independent motor control 3 phase system. Over load protection. Starter and circuit breaker. Installation is priced per hour, see item 3.2 $6,770 4.2 In line heater option to include: In line heater. Heating elements. Control system. Requires customer to supply separate electrical hook up. Installation is priced per hour, see item 3.2. $6,360 4.3 Recycled water kit to include: 100 GPM pump. Motor starter circuitry. Three way valve. Level sensor. Hose barbs and logic control. Fittings for splitting dilute water. Installation is priced per hour, see 3.2. $5,990 4.4 2" Storage tank fitting kit to include: 2" tank flange, 2" ball valve, manifold hose barbs, clamps and gaskets. $320
4.5 3" Storage tank fitting kit to include: 3" tank flange, 3" ball valve, manifold hose barbs, clamps and gaskets. $600 5.0 Delivery Fill in starting point and cost per loaded mile. City/State/Zip Code 5.1 100 Northeast Drive, Loveland, OH 45140-7144 NO CHARGE 6.0 NEW EQUIPMENT RENTAL PROGRAM NA 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM NA 8.0 Equipment Inspection & Repair NA Total Cost
- - - - - - -
- E -
STATE OF MINNESOTA PRICING PAGE 1 of 1 Price quote for: SALT BRINE PRODUCTION SYSTEM Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Cargill Deicing Technology Jim Anderson 967 Sunny Ridge Drive Carver, MN 55315 852-448-6808 440-716-0550 jim_a_anderson@cargill.com Make Model Cargill AccuBrine ABS Spec # Information Requested Answer Price for Base Unit: $81,948.00 1.0 Salt Brine Production System System Operating Voltage 220 Volts single phase @ 30 AMPS Brine Tank Holding Capacity 1200 gallon, plus a 12" x 12" Brine Tank Material Tank Wall Thickness Hopper Holding Capacity Hopper Material Hopper Wall Thickness Containment System Holding Cap. Containment System Wall Thickness Pump Capacity in GPM Electric Motor H.P. Fiberglass with ceramic coating.35" &.50" thick 5 cubic yards Fiberglass with ceramic coating.35" &.50" thick NA NA 107 GPM 3 HP Water In-feed Pipe Size Up to 2" System Production Cap. In GPH Warranty 5000 GPH 1 Year
SALT BRINE PRODUCTION SYSTEM Cargill Deicing Technology Jim Anderson 967 Sunny Ridge Drive Carver, MN 55315 952-448-6808 440-716-0550 jim_a_anderson@cargill.com Make Cargill AccuBrine Model ABS Spec # Description QTY Price 1.0 Base Price $81,948.00-2.0 Hose Options NA 3.0 Installation & Set-up Cost 3.1 Basic installation include in Base Price to include: Place control panel and secure to floor or pad provided by customer. Connect to customer supplied 2" water supply with back flow preventer, (water supply to be within 10' of control panel). Place salt tank into position with assistance of customer. Install flex hose from control panel to salt tank (salt tank to be within 15' of control panel). Connect electrical plug into supplied outlet (requires L14-30R outlet). Install flex hose to customer supplied storage tank fitting (must be within 4' of control panel). Start up brine maker and test all functions. Train customer on all functions. Install single transducer in customer storage tank (customer to supply wiring and conduit to and from control panel to tank. No installation of through wall manifolds are included in basic installation. - 3.2 Installation of all other items not covered in item 3.1 Price Per Hour plus materials (price per person). $150.00-4.0 Additional Options. 4.1 300 GPM pump kit to include: Pump with independent motor control 3 phase system. Over load protection. Starter and circuit breaker. Installation is priced per hour, see item 3.2 $6,770-4.2 In line heater option to include: In line heater. Heating elements. Control system. Requires customer to supply separate electrical hook up. Installation is priced per hour, see item 3.2. $6,360-4.3 Recycled water kit to include: 100 GPM pump. Motor starter circuitry. Three way valve. Level sensor. Hose barbs and logic control. Fittings for splitting dilute water. Installation is priced per hour, see 3.2. $5,990-4.4 2" Storage tank fitting kit to include: 2" tank flange, 2" ball valve, manifold hose barbs, clamps and gaskets. $320 4.5 3" Storage tank fitting kit to include: 3" tank flange, 3" ball valve, manifold hose barbs, clamps and gaskets. $600 5.0 Delivery Fill in starting point and cost per loaded mile. City/State/Zip Code 5.1 100 Northeast Drive, Loveland, OH 45140-7144 NO CHARGE
6.0 NEW EQUIPMENT RENTAL PROGRAM NA 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM NA 8.0 Equipment Inspection & Repair NA Total Cost -
STATE OF MINNESOTA PRICING PAGE 1 of 1 Price quote for: SALT BRINE PRODUCTION SYSTEM Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Cargill Deicing Technology Jim Anderson 967 Sunny Ridge Drive Carver, MN 55315 852-448-6808 440-716-0550 jim_a_anderson@cargill.com Make Model Cargill AccuBrine ABS2 Spec # Information Requested Answer Price for Base Unit: $87,948.00 1.0 Salt Brine Production System System Operating Voltage 220 Volts single phase @ 30 AMPS Brine Tank Holding Capacity 1200 gallon, plus a 12" x 12" Brine Tank Material Tank Wall Thickness Hopper Holding Capacity Hopper Material Hopper Wall Thickness Containment System Holding Cap. Containment System Wall Thickness Pump Capacity in GPM Electric Motor H.P. Fiberglass with ceramic coating.35" &.50" thick 5 cubic yards Fiberglass with ceramic coating.35" &.50" thick NA NA 107 GPM 3 HP Water In-feed Pipe Size Up to 2" System Production Cap. In GPH Warranty 5000 GPH 1 Year
Price quote for: SALT BRINE PRODUCTION SYSTEM Vendor Name: Cargill Deicing Technology Contact Person Jim Anderson Street Address 967 Sunny Ridge Drive PO Box City, State, Zip Carver, MN 55315 Phone # 952-448-6808 Toll Free # Fax # 440-716-0550 Email Address jim_a_anderson@cargill.com Make Model Cargill AccuBrine ABS2 Spec # Description QTY Price 1.0 Base Price $87,948.00-2.0 Hose Options NA 3.0 Installation & Set-up Cost 3.1 Basic installation include in Base Price to include: Place control panel and secure to floor or pad provided by customer. Connect to customer supplied 2" water supply with back flow preventer, (water supply to be within 10' of control panel). Place salt tank into position with assistance of customer. Install flex hose from control panel to salt tank (salt tank to be within 15' of control panel). Connect electrical plug into supplied outlet (requires L14-30R outlet). Install flex hose to customer supplied storage tank fitting (must be within 4' of control panel). Start up brine maker and test all functions. Train customer on all functions. Install single transducer in customer storage tank (customer to supply wiring and conduit to and from control panel to tank. No installation of through wall manifolds are included in basic installation. - 3.2 Installation of all other items not covered in item 3.1 Price Per Hour plus materials (price per person). $150.00-4.0 Additional Options. Use this section to list any additional options not listed above. 4.1 300 GPM pump kit to include: Pump with independent motor control 3 phase system. Over load protection. Starter and circuit breaker. Installation is priced per hour, see item 3.2 $6,770-4.2 In line heater option to include: In line heater. Heating elements. Control system. Requires customer to supply separate electrical hook up. Installation is priced per hour, see item 3.2. $6,360-4.3 Recycled water kit to include: 100 GPM pump. Motor starter circuitry. Three way valve. Level sensor. Hose barbs and logic control. Fittings for splitting dilute water. Installation is priced per hour, see 3.2. $5,990-4.4 2" Storage tank fitting kit to include: 2" tank flange, 2" ball valve, manifold hose barbs, clamps and gaskets. $320 4.5 3" Storage tank fitting kit to include: 3" tank flange, 3" ball valve, manifold hose barbs, clamps and gaskets. $600 5.0 Delivery Fill in starting point and cost per loaded mile. City/State/Zip Code 5.1 100 Northeast Drive, Loveland, OH 45140-7144 NO CHARGE
6.0 NEW EQUIPMENT RENTAL PROGRAM NA 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM NA 8.0 Equipment Inspection & Repair NA Total Cost