Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent LED light elements achieve flexible yet precise illumination with artistic results. The extruded aluminum housing creates a clean 1/2 slot that can be run up, around and across walls and ceilings. The Tracking Magnet is available in recessed, surface, or pendant mounted applications, making it an option in even the most varied of job conditions. Vertical and horizontal corners complete the system. The Tracking Magnet is perfect for retail displays where frequent changes are typical and absolute performance is required. Lamps Spot Tracking Magnet 50: LED 4.2W, 410lm, K, 4.2W, 440lm, K, Spot Tracking Magnet : LED 9.6W, 850lm, K, 9.6W, 0lm, K, Spot Tracking Magnet 120: LED 12.5W, 1060lm, k, 12.5 W, 985lm, K, Anthony Spot Track: LED 17W, 1870lm, K, 17W, 1785lm, K, WALLEE Spot 9W, 0lm, K, 9W, 820lm, K, Light Strip: LED 2.7W, 230lm, K, 5.4W, 460lm, K, 8.1W, 685lm, K, 10.8W, 915lm, K, 13.5W, 1145lm, K, 2.7W, 230lm, K, 5.4W, 460lm, K, 8.1W, 685lm, K, 10.8W, 915lm, K, 13.5W, 1145lm, K, Notes The 120 spot tracking light module is offered with a spot and a flood lens. All available accessories for the spot modules come with the product. Fixture heads all rotate 360 and tilt from nadir. Listings: UL Listed, IP 20 dry rated only, Class 2. Warranty Construction Luminaire and profiles are made of extruded aluminum. Profiles can field cut. Electrical 24V electrical system. Powered by remote listed Class 2 power supply. System is limited to a maximum power current of 4A. After every 96W make a new connection with a connection feed profile. Wattage per linear foot is dependent upon quantity and type of light modules used, total max possible per linear foot is 34W. EC to supply site cabling from driver to track location. Specify one connection cable per driver. Spot modules on board dimming. Not available on Light Strips. Wall switch dimming not available. Surface Profile Electromechanical track for surface-mounting. Linear tracks available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. Both versions available in lengths from 1m to 2m. Covers included with the power feed profiles. Attachment accessories included with all products. corners available in the same plane (symmetrical element for left and right corner) and symmetrical internal corners in a different plane. For connection to the driver. Photometrics For current IES files please visit architectural.flosusa.com 2 years from date of sale. Page 1 of 7
Luminaries Spot Tracking Magnet 50 Spot Tracking Magnet Spot Tracking Magnet 120 Anthony Spot Track Wallee Light Strip Accent LED spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets. Built-in dimming knob dims fixture from 20-100%. Dimming not available on Light Strips. All available accessories ship with the product. Profiles The extruded aluminum housing creates a clean 1/2 slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete the system. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until after installation. Length Part Number Feed Unit Profile Part Number Intermediate Profile 1.7 [44 mm] 39.4 (1m) 59 (1.5m) 06.1500 06.1501 06.1505 06.1506 05= Chrome 78.74 (2m) 06.1502 06.1507 14 = Black 0.6 [15,2 mm] Both profile types can be cut to different lengths in field. 0.7 [18 mm] Corners Horizontal corners available for turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces. Corner can be used for feeding by removing cover plate. No wire provided for feeding. Horizontal Corner 06.1510 14 = Black Inside Corner 06.1512 14 = Black Page 2 of 7
Ceiling Kits For installation on ACT or wood ceiling. Consult factory for other ceiling types. Fixed Ceiling Kits (2 units) 08.8866.14 FIXED CEILING KIT [2 PER 500mm] Adjustable Ceiling Kits (2 units) 08.8867.14 ADJUSTABLE CEILING KIT [2 PER] M6 THREADED ROD (BY OTHERS) 0.6 Drivers LED Driver- 96W Optronic 24V Driver, no dimming wire configuration Splice Box LED96W24V-Non-Dim SP-24V-96W-Non-Dim 13 [347mm] 2.2 [59mm] 1.7 [46mm] End Caps End caps come with feed profiles. These should only be ordered separately if the installation is exclusively composed of intermediate elements. Part Number 08.88.40A 08.88.14A 14 = Black Page 3 of 7
Spot Tracking Magnet 50 ø 2.3 [58 mm] 2.0 [50 mm] º 3.1 [78 mm] 5.0 [128 mm] 2.3 [58 mm] 440 193 4,2 21º 03.6440 14 = Black. Dimmable on board 410 186 4,2 21º 03.6441 14 = Black. Dimmable on board Spot Tracking Magnet ø 1.4 [35 mm] 4.7 [119 mm] 2.6 [66 mm] 3.5 [ mm] º 4.8 [121 mm] 0 586 9,6 25º 03.6410 14 = Black A Dimmable on board 850 545 9,6 25º 03.6411 14 = Black. Dimmable on board Page 4 of 7
Spot Tracking Magnet 120 ø 1.8 [46 mm] 2.6 [66 mm] 4.7 [119 mm] [153 mm] 6.0 º 4.7 [119 mm] Initial Lumen Initial Lumen Watts Beam Spread Part Number 814 25º 03.6412 1060 12,5 14 = Black A Dimmable on board 671 33º 03.6425 767 985 12,5 442 24º 33º 03.6413 03.6424 14 = Black. Dimmable on board Anthony Spot Track 7.3 [185 mm] º ø 4.3 [110 mm] 4.6 [117mm] 2.2 [55 mm] ø 3.0 [76 mm] 1563 20º 03.6400 1870 1491 17 34º 03.6402 14 = Black A Dimmable on board 1445 47º 03.6404 1492 20º 03.6401 1785 1423 17 34º 03.6403 14 = Black A Dimmable on board 1379 47º 03.6405 Page 5 of 7
Wallee [12 mm] [ mm] [242 mm] [12 mm] [220 mm] 820 453 9 96 º 03.64. Dimmable on board 14 = Black 0 453 9 96 º 03.6491 14 = Black. Dimmable on board Light Strip 6 [15 mm] 1 [25 mm] SEE TABLE Length Initial Lumen Delivered Lumen Watts Part Number Dimmable 11.8 (300 mm) 230 107 2.7 03.6370.14 03.6360.14 23.6 (600 mm) 460 214 5.4 03.6371.14 03.6361.14 35.4 (0 mm) 685 321 8.1 03.6372.14 03.6362.14 47.2 (1200 mm) 915 428 10.8 03.6373.14 03.6363.14 59 (1500 mm) 1145 535 13.5 03.6374.14 03.6364.14 Page 6 of 7
How to Specify A. Select and position corners 1. Horizontal - Connect sections on flat surfaces (º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270 corner) B. Fill lengths between corners with Linear Housings 3, 6 or 9 sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together. C. Drivers Quantity of drivers determined by total wattage or light elements in section (total maximum possible per linear foot is 34W). Maximum driver distance is 15. Locate drivers nearby. D. Select Spot heads Linear strips are available in five nominal lenghts: 1, 2, 3, 4 and 5. Individual units can be adjusted from 20-100% with on board switch. Visit FLOS Worldwide YouTube channel for installation videos Page 7 of 7