Aviation Piston Engine Lubricants
Discover our complete range of aviation lubricants and services PISTON ENGINE LUBRICANTS Non dispersive Aero 100 FRANCE: AIR 3560/D grade SAE 50 US, UK: SAE J 1966 SAE grade 50 Aero 120 US: SAE J 1966 grade SAE 60 Pure mineral oils for the lubrication of piston engines operating under average conditions. Lubrication of vintage aeroplanes (WWI and WWII warplanes). Dispersive Aero D 100 FRANCE: AIR 3570 grade SAE 50 US, UK: SAE J 1899 SAE grade 50 Aero D 120 FRANCE: AIR 3570 grade SAE 60 US, UK: SAE J 1899 SAE grade 60 Ashless dispersive monograde mineral oils for the lubrication of piston engines operating under severe and very severe conditions. Aero XPD 100 FRANCE: AIR 3570 grade SAE 50 US, UK: SAE J 1899 SAE grade 50 FAA approved AD 80-04-03R2 paragraph b.1. AVCO LYCOMING (301F) approved. Aero XPD 120 FRANCE: AIR 3570 grade SAE 60 US, UK: SAE J 1899 SAE grade 60 FAA approved AD 80-04-03R2 paragraph b.1. AVCO LYCOMING (301F) approved. Aero DM 15W-50 French Air Force approved (n 30330 STPA/MA) SAE J 1899 FAA approved AD 80-04-03R2 paragraph b.1. AVCO LYCOMING (301F) and TELEDYNE CONTINENTAL (MHS-24) approved. Aero DM 20W-60 SAE J 1899 Meets the requirements of FAA AD 80-04-03R2 paragraph b.1. from FAA Conform to 301F AVCO LYCOMING specification. New generation ashless dispersive monograde mineral lubricants, specially developed to improve antiwear and corrosion protection of your highly valued piston aviation engine. These oils already contain an anti-wear additive similar to TEXTRON Lycoming LW 16702. Ashless dispersive multigrade oils for the lubrification of piston engines operating under severe and very severe conditions. Can be used throughout the year in any climate. These oils already contain an anti-wear additive similar to TEXTRON Lycoming LW 16702. ENGINE PROTECTION LUBRICANT Aeroprotective 219 FRANCE: AIR 1503/B type A UK: DEF STAN 91-40/2 Joint Service Designation: PX-27 NATO code: C-615 Internal protective mineral oil for piston engines. HYDRAULIC FLUID Aerohydraulic 520 FRANCE: AIR 3520/B (H-520) US: MIL-PRF-5606H UK: DEF STAN 91-48/1, standard grade Joint Service Designation: OM-18 NATO Code: H-520 Mineral hydraulic oil for systems operating under: n high pressure, n low and extemely low temperatures. GREASE Aerogrease 15 FRANCE: DCSEA 382/A US: MIL-G-7711 A Amd. 1 (obsolete) UK: DEF STAN 91-12 Joint Service Designation: XG-271 NATO code: G-382 Recommended for temperatures below -20 C. Recommended for applications that may come into contact with paints, varnishes and elastomers. *performs to. TOTAL Lubrifiants reserves the right to modify the formulation of its products without prior notice in order to improve their performance or comply with changing regulations.
TOTAL Oil in Australia Who are we? TOTAL Oil Australia is the Australian lubricants division of TOTAL, a leading multinational energy company. As the fifth largest integrated oil and gas company in the world, TOTAL has more than 97,000 employees globally and a strong international presence in more than 150 countries worldwide. We pride ourselves on our innovative lubricant products which are developed in TOTAL s state-of-the-art research facilities and in close cooperation with the major equipment manufacturers of the world. About our Products: As one of the world's leading lubricant producers, TOTAL has a strong emphasis on innovation and provides substantial investment on lubricant research and development (R&D) for Aviation, Automotive and Industrial applications. Our Aviation Lubricants exceed the highest level of industry specifications and are approved by all major piston engine manufacturers. We are proud that both the world champion Red Bull and the Lotus Formula 1 racing teams rely on TOTAL lubricant technology. TOTAL and Elf lubricants are proven at the highest level of Motorsports, including Formula 1 (18+ world champion titles), WRC (over 200 WRC victories), Le Mans, Dakar Rally and Moto GP. Why choose us? As a proven leader in the lubricants market, we have the size, resources and R&D capabilities to adapt to an increasingly complex lubricants market. We are committed to supplying your aircraft with our leading technology lubricants. We are confident in delivering the performance benefits that only a global R&D effort can bring! We service the Australian market by supplying both TOTAL and Elf lubricant brands. The TOTAL and Elf brands are synonymous world-wide with cutting edge lubricant technology. TOTAL General Aviation Lubricants The fundamentals of Leading Technology, Uncompromising Safety, Protection of Complex Equipment are just a few of the parallels between the world of Formula 1 and Aviation. At TOTAL, we have over a quarter of a century of experience in General Aviation Lubricants and have lifted high performance lubrication to a new level, a level for our competitors to aspire to.
TOTAL Aero Non-dispersant oils 100 120 At TOTAL, we offer you a range of two non-dispersant mineral oils. This puts you in a position to safely comply with all engine manufacturer's publications relating to the running in of new and re-manufactured engines, or when a new or overhauled cylinder has been fitted to your engine during its service life. Manufacturers specify these non-dispersant oils under certain circumstances for good reason, which is why we ensure that we produce the correct break-in oils for you to use during this critical phase of your engine's life. These oils are also often specified in vintage engines, for use right through to time between overhaul (TBO). TOTAL Aero D Dispersant oils 100 120 When an ashless dispersant mineral monograde oil is required, TOTAL has your needs covered. We offer two grades to cover all climatic conditions and engine types. All TOTAL's Aero engine oils are blended from specially selected base oils, ensuring ultimate lead handling ability to help keep your engine s vital oil galleries clean. The Aero D range also includes other additives to help keep your engine even cleaner, especially in more severe operating conditions. TOTAL's ashless dispersant oils are formulated with anti-oxidants to help stabilize the oil in more severe operating conditions, and pour point depressants to help ensure the oil remains fluid when cold. TOTAL Aero XPD Oils 100 120 When you would like that extra protection for your engine, TOTAL has the answer. Our lubricant engineers have developed the ultimate range of ashless dispersant monograde oils for your aircraft. We cover all climatic conditions with these XPD grades, all of which include an antiwear additive that conforms to the requirements of the Lycoming service bulletin. These advanced oils also contain extra corrosion protection as well as eliminating the need to add any further bottles of expensive additive. For the ultimate in monograde protection for your valuable aircraft engine, you cannot go past the TOTAL XPD range of engineered lubricants.
TOTAL Aero DM Semi-synthetic multigrade oils 15W-50 and 20W-60 Expert Advice As with Formula 1, prompt access to informed, competent and educated advice is key. From some of the best quality advice in the industry, to our advanced range of aviation oils, TOTAL are here to help you. Just contact us. TOTAL lubricants your total solution Premium protection all-year-round comes from TOTAL, with our semi-synthetic range of piston engine lubricants. TOTAL offer these oils in two semi-synthetic grades, targeted at covering the full climatic temperature range. These ashless dispersant oils are packed full of additives including the antiwear additives necessary to meet the Lycoming service bulletin requirement. From the manufacturer of highly advanced oils used by World Champion Formula 1 teams, TOTAL's products are at the cutting edge of lubrication technology. There is a significant dual advantage in using some synthetic and some mineral base oil in an air-cooled aircraft engine lubricant. The synthetic portion of the oil provides greater oxidation resistance at high temperatures, which results in better oil and engine life. The specially selected mineral oil component ensures superb capacity to handle the lead containing combustion by-products. One of the major advantages of using a multigrade is demonstrated in the faster lubrication of the vital engine parts after start-up, while providing the same great protection of a monograde at normal operating temperatures. Trust TOTAL to satisfy your lubricant needs for protection of your valuable investment.
References & OEMs TOTAL Lubricants cooperates with equipment manufacturers to create high-technology products for optimal performance and protection of your machinery. Safety Data Sheets are available at www.totaloil.com.au A major player With our production, supply chain and commercial presence in more than 150 countries, we deliver a full range of lubricants to cover all your needs. Quality & environment 5 good reasons for TOTAL Lubricants ISO 9001 certification is the guarantee of a long-term commitment to quality. From the initial design stage, our R&D teams seek to develop products that minimise toxicity risks and environmental impact. Support & partnership Thanks to our local technical presence, we are able to provide a high level of service to optimise your TOTAL Cost of Ownership. choosing TOTAL Innovation & research TOTAL invests in biotechnologies to find the most suitable components to reach energy efficiency through formulations designed in our research centers. 2014 TOTAL Lubrifiants SA 552 006 454 RCS Nanterre. All rights reserved. Non contractual document. Credits: Paul Veronique/TOTAL, Marco Dufour/TOTAL, Jean-Michel Le Meur/DPPI Authorised TOTAL Distributor: KAIROS Oil Australia Pty Ltd PO Box 1500, Camberwell East 3126 VIC, Australia www.kairos-oil.com (03) 9996 1988 http://www.lubricants.total.com/pro/industry.html www.totaloil.com.au 1800 TOTAL OIL (1800 868 256) The right choice in lubricants