Premium Electric Strikes Cross Reference Chart

TRINE 4800 EN-400 EN-430 EN-435 EN-800** EN-850** EN-900 EN-900W EN-950 EN-950W EN-960 3234 3234W 3258 3458~ 3478 3478RD Folger Adams 712,712-75, 732 732-75, 642CYL 652SYL 652RFL 310-4** 310-4** 310-2 310-2W 310-2 3/4 Premium Electric Strikes Cross Reference Chart H.E.S 9500*** 9600 1006J, 7501 1006KD 1006K 7483S** 7489S** 1003J-2 1003J-2 7505 5000/5200+ 501 5000/5200+ 501"A" Von Duprin 6211, 6211WF 6210 6210 6112** 6215,6226 6214, 6224 Adams Rite 7200 71R1 7340+ 7300+ RCI 2114 F4114* 2134/2334 2124 0161 2319 F4119* L6514+ L6504+ + Strike has 1 1/16" backset vs. 1" backset for 3000 Series. ~ Requires 80% less cutting of frame. Fills the frame preparation of the Adams Rite MS Locks without the need to relocate tabs for 6 5/8" or 6 7/8" electric strikes. Requires 60% less frame face cutting other than models listed. * UL 90 Minute Fire Rated ** All Stainless Steel construction *** Model 9500 has a 90-minute fire rating. The 4800 is a cross-over if fire rating is not required. NOTE: there may be variations in physical size or electrical characteristics between manufacturers. Information in the above chart based on manufacturers' catalogs and reference should be made to manufacturer's catalog for complete detail comparisons. 1440 Ferris Place, Bronx, NY 10461 P: 718.829.2332 F: 718.829.6405 customerservice@trineonline.com WWW.TRINEONLINE.COM

TABLE OF CONTENTS 4000 Series...4-5 EN Series...6-11 Features & Standards...6 Models...6-8 Accessories...9 Product Dimensions...10-11 3000 Series...12-14 Modular...12-14 Completed Strikes...15-16 Product Dimensions...16-17 Frame Preparations...18-20 Frame Prep Comparisons...21 Light Commercial 00 Series...22-23 Light Commercial 01 Series...24 1000 Series...25 Adjustable Strikes 2000 Series...25-26 Wireless...27-28 Chimes...27 Controllers & Transmitters...28 Door Alarms, Switches, Motion Alerts...29 Chimes, Bells, Buzzers...30 Transformers & Rectifiers...31 Push Buttons...32 Glossary...33 Notes Page...34 Conditions of Sale...35

4000 Series The Intelligent Strike...Built-In Electronics THE ONLY ELECTRONIC STRIKE IN THE WORLD ELECTRICAL CHARACTERISTICS 1 3/4" 3/4" VOLTAGE 12DC 24DC 12AC 16AC 24AC PULL IN / HOLD AMPS.566/.217.253/.099.509/.181.402/.149.215/.087 DUTY Intm./Cont. Intm./Cont. Intm./Cont. Intm./Cont. Intm./Cont. SOUND Electronics allow for PLUG & PLAY capability! FEATURE 4800 VS. 9600 TRINE HES Frame cutting None None Number of locking mechanisms 1 2 Number of holding points in mounting system Operating Voltage Up to 6 12 THRU 24 AC/DC (only two wires to connect) 3 12 or 24 DC (Wires must be cut and tied off for 24 DC) 9" Unique 4 Point Anchoring System Built-in surge and kickback protection Yes No - Optional Holding force 3000 + lbs. 1500 lbs. Life cycles 1,500,000+ 500,000 1/8" steel spacer plate included Yes No - Optional Field Selectable Fail Safe/Fail Secure Yes Yes Horizontal locking screws Yes Yes Non Handed Yes Yes Accommodating up to ¾" Pullman Latch Yes Yes Plug-in connectors Yes Yes BHMA Grade 1 Yes Yes THIS STRIKE IS FOR INDOOR USE ONLY *information based on manufacturer catalog 4

4000 Series The Intelligent Strike...Built-In Electronics Only 3 holes to drill for installation NO CUTTING!! Built-in electronics AUTOMATICALLY allow 12 THRU 24 AC/DC Optional four-pin Anchoring System for extra strength included One Piece Locking Mechanism One Solenoid Fail Secure/Fail Safe Field Selectable Stainless Steel Construction 1,500,000 + life cycles 3,000 + lbs. holding force 1/8" Steel Spacer included Product Application Specifications Finishes/Function Price 4800 For use in new or replacement installations in wood or metal single door frames. Use with surface mounted rim exit devices with up to 1" throw. Product Dimensions 9"x1-3/4"x3/4" Extra Steel Spacer Model 4800SS Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Satin Bronze US10/BHMA612 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $20.00 $440.00 $499.00 $499.00 $499.00 $499.00 $499.00 4800LB Optical sensor for detecting bolt engagement with the strike eliminates the need for mechanical adjustments. Product Dimensions 9"x1-3/4"x3/4" Honeywell IR optical sensor Single pole, double throw, Form "C" relay, rated at 1-amp at 12-24 AC/DC N/O and N/C relay contacts Module power source rating of 12-24VDC Current consumption is: 12V: standby 12.7 ma activate 22.8 ma 24V: standby 19.4 ma activate 34.4 ma Extra Steel Spacer Model 4800SS Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Satin Bronze US10/BHMA612 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $20.00 $515.00 $580.00 $580.00 $580.00 $580.00 $580.00 4801 For use with the Yale Squarebolt or Corbin Russwin Securebolt TM in new or replacement installations in wood or metal single door frames. Use with surface mounted rim exit devices with up to 1" throw. Product Dimensions 9"x1-3/4"x3/4" Extra Steel Spacer Model 4800SS Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Satin Bronze US10/BHMA612 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $20.00 $489.00 $565.00 $565.00 $565.00 $565.00 $565.00 5

EN SERIES SIMPLICITY AT ITS BEST! ONLY 8 PARTS Only one moving part in the locking mechanism All Stainless Steel Construction Our patented locking mechanism, gives you: - SUPERIOR STRENGTH - Over 2,000 lbs. - SUPERIOR LIFE - Over 1,000,000 Cycles - SUPERIOR APPLICATIONS - UL outdoor rating allows the strike to go where others can't... FEATURES Only one locking mechanism Fail Secure/fail safe field reversible on DC Units* Durability - 1,000,000 Life Cycles Holding Force - 2000 lbs UL Tested All Stainless Steel Construction Field Adjustable Left or Right Handing* Units install flush with face of the frame ELECTRICAL CHARACTERISTICS Voltage 12VAC 24VAC 12VDC 24VDC Current/Amps.70.37.28.15 Ohms 4.5 18.0 43.0 164.0 Sound Buzz Buzz U C L US LISTED Duty Intm Intm Intm/Cont Intm/Cont STANDARDS UL Listed 10C - Fire-rated (Class A, 3-hour, single swing door)** UL Listed 1034 - Indoor/Outdoor Burglary Resistant BHMA 156.31 2001, Grade 1 NYC MEA 79-01-E Fail Safe Requests: Add $15 to List *Except EN430 & EN435 **Except EN800 & EN 850 WIRE LEAD COLOR CODES Voltage Wire Colors 12VAC (1) Blue, (1) Orange/White 24VAC (1) Blue, (1) Black/White 12VDC (2) Orange/White 24VDC (2) Black/White LEFT HAND (LH) LEFT HAND REVERSE BEVEL (LRB) DOOR HANDING OUTSIDE RIGHT HAND (RH) HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE. OUTSIDE RIGHT HAND REVERSE BEVEL (RRB) 6 How to Order: Model - Voltage - Finish - Hand EN400-12DC - 32D - RH When Ordering Strikes: LRB=RH RRB=LH

EN SERIES Product Application Specifications Finishes Price 400 For new or replacement Face Plate 4-7/8 x Satin Stainless Steel installations in wood or 1-1/4 US32D/BHMA630 metal jambs. Use with mortise exit devices, mortise locks without dead bolts and cylindrical locksets with up to 7/8" throw, based on 1/8" door gap. Mortise Backset 1-11/16 Cavity Depth 7/8 Cavity Width 3/4 (Latch Shim Kit Provided) Cavity Height 1-1/2 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Satin Bronze US10/BHMA612 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $325.00 $355.00 $355.00 $355.00 $355.00 $355.00 430 Left Hand shown Here For new or replacement installations in metal jambs. Use with mortise lock latchbolts with up to 7/8 throw without relocating centerline. Based on 1/8" door gap. Specify Handing Face Plate 4-7/8 x 1-1/4" Cavity Centerline Offset 1" Mortise Backset 1-3/4 Cavity Depth 7/8 Cavity Width 1 (Latch Shim Kit Provided) Cavity Height 1-1/2 Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Satin Bronze US10/BHMA612 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $345.00 $375.00 $375.00 $375.00 $375.00 $375.00 435 Left Hand shown Here For new or replacement installations in metal jambs. Use with mortise lock latchbolts with up to 7/8 throw without relocating the centerline. Based on 1/8" door gap. Specify Handing Face Plate 4-7/8 x 1-1/4" Cavity Centerline Offset 3/4" Mortise Backset 1-3/4 Cavity Depth 7/8 Cavity Width 1 (Latch Shim Kit Provided) Cavity Height 1-1/2 Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Satin Bronze US10/BHMA612 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $345.00 $375.00 $375.00 $375.00 $375.00 $375.00 800 For new or replacement installations in wood or metal single door jambs. Use with surface mounted rim exit devices with up to 1 throw. 3/4" thick face plate. Face Plate 9" x 1-11/16 x 3/4 Semi-Mortise Backset 1-9/16 45 Beveled Face Plate Auxiliary Ramp 3-3/8" 1/8" Horizontal Adjustment on Mechanism 1/4" Horizontal Adjustment on Face Plate Mounting Holes Cavity Depth 1-1/8" Cavity Width 3/4 Cavity Height 1-1/2 Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Satin Bronze US10/BHMA612 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $365.00 $399.00 $399.00 $399.00 $399.00 $399.00 7

EN SERIES Product Application Specifications Finishes Price 850 For new or replacement Face Plate 9" x 1-11/16 x Satin Stainless Steel $396.00 installations in wood or 1/2 US32D/BHMA630 metal single door Semi-Mortise Backset Bright Brass $426.00 1-1/4 jambs. Use with US3/BHMA632 45 Beveled Face Plate surface mounted rim Auxiliary Ramp 3-3/8" Satin Brass $426.00 exit devices with up to 1/8" Horizontal Adjustment US4/BHMA667 1 throw. on Mechanism Satin Bronze $426.00 1/4" Horizontal Adjustment US10/BHMA612 1/2" thick face plate. on Face Plate Mounting Dark Bronze $426.00 Holes US10B/BHMA640 Cavity Depth 1-1/8" Bright Chrome Cavity Width 3/4 $426.00 Cavity Height 1-1/2 US26/BHMA651 900 900W For new or replacement installations in metal or wood (900W) jambs. Use with mortise exit devices, mortise locks without deadbolts and cylindrical locksets with up to 7/8 throw. Based on 1/8" door gap. Face Plate 9 x 1-3/8" Mortise Backset 2 Auxiliary Ramp 3-3/8" Cavity Depth 7/8 Cavity Width 3/4 (Latch Shim Kit Provided) Cavity Height 1-1/2 9" Stiffener Plate provided for laminated reinforcement Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $325.00 $350.00 $350.00 $350.00 $350.00 950 For new or replacement installations in metal or wood jambs. Use with mortise exit devices, mortise locks without deadbolts and cylindrical locksets with up to 7/8 throw. Based on 1/8" door gap. Face Plate 9 x 1-3/8" Mortise Backset 1-11/16 Auxiliary Ramp 3-3/4" Cavity Depth 7/8 Cavity Width 3/4 (Latch Shim Kit Provided) Cavity Height 1-1/2 9" Stiffener Plate provided for laminated reinforcement Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $325.00 $350.00 $350.00 $350.00 $350.00 960 For new or replacement installations in metal or wood jambs. Use with mortise exit devices, mortise locks without deadbolts and cylindrical locksets with up to 7/8 throw. Based on 1/8" door gap. Face Plate 9 x 1-3/8" Mortise Backset 2 Auxiliary Ramp 3-3/4" Cavity Depth 7/8 Cavity Width 3/4 (Latch Shim Kit Provided) Cavity Height 1-1/2 9" Stiffener Plate provided for laminated reinforcement Satin Stainless Steel US32D/BHMA630 Bright Brass US3/BHMA632 Satin Brass US4/BHMA667 Dark Bronze US10B/BHMA640 Bright Chrome US26/BHMA651 $350.00 $380.00 $380.00 $380.00 $380.00 8

EN SERIES Product Application Specifications Price EN-LB Remote Central station notification Local alarm monitoring relay Triggering video surveillance & recording systems Active Relay for trap door systems Honeywell IR optical sensor 4 sensitivity settings for various latch bolt configurations Single pole, double throw, Form "C" relay, rated at 1-amp at 12-24 AC/DC N/O and N/C relay contacts Module power source rating of 12-24VDC Current consumption is 0.034 amps at 12VDC & 0.045 amps at 24VDC FACTORY INSTALLED ADD $60.00 TO LIST PRICE TO ORDER: ADD "LB" TO MODEL ex.: 400LB-12DC-32D-LH OPTIONAL ACCESSORIES MODEL DESCRIPTION PRICE LC-100 External unit that operates on 12-24 AC/DC $32.00 input and provides inductive kickback and surge protection. MUST BE USED WITH 12DC UNITS EN-CA-12DC Interchangeable Coil Assembly $35.00 EN-CA-24DC Interchangeable Coil Assembly $35.00 EN-CA-12AC Interchangeable Coil Assembly $35.00 EN-CA-24AC Interchangeable Coil Assembly $35.00 EN-SLR-RS (1) Fail Safe Slider for 430/435 Units $30.00 TRS (2) Tamper-Resistant Torx #12-24 Screws $2.00 EN-TS Trim Skirt (Not for use with 950 &960) $18.00 BZ-12 Audible Buzzer for DC Operation $11.00 BZ-24 Audible Buzzer for DC Operation $11.00 ESK-1 EN Service Kit: $6.00 (1) Stainless Steel Latch Spring (2) PFH 12-24x1" Mounting Screws (2)PFH 6-32 x 1/8" Cover Screws (2) Wire Nut Caps (1) Assembly Pin and Instruction Sheet 9

EN SERIES CENTERLINE OFFSET OF LATCH CAVITY 1" OFFSET CENTERLINE OFFSET OF LATCH CAVITY 3/4" OFFSET

EN SERIES EN 850 1/2" 1 3/4" 1 5/8" 1 5/8" 3/4" LATCH WIDTH 3/8" 9" 3 1/2" 1 1/2" 3 1/2" 1 1/2" 9" 2 1/16" 3/4" LATCH WIDTH 1 3/8" LATCH DEPTH 8 1/4" 1 11/16" 7/8" LATCH DEPTH 1 11/16" 8 3/8" STIFFENER PLATE EN 950/950W 1 3/8" EN 960 1 5/8" 1 5/8" 3/4" LATCH WIDTH 3/4" LATCH WIDTH 3/8" 3/8" 3 3/4" 1 1/2" 9" 3 3/4" 1 1/2" 9" 1 11/16" 7/8" LATCH DEPTH 1 11/16" 8 3/8" 2" 7/8" LATCH DEPTH 1 11/16" 8 3/8" STIFFENER PLATE STIFFENER PLATE 11

3000 Series The Smallest Electric Strike in the World! ONLY 1" TOTAL BACKSET... FEATURES: GRADE 1 500,000 + life cycles 1,500 + lbs. holding force (1,200 lbs. for 334, 3234W) Dynamic Force 70 ft/lb Solid stainless steel latch and locking mechanism Accepts a bolt with a up to 5/8" throw Non-handed (except 458, 478 LO/RO) Fail secure - standard action (unlocks with power) Fail safe - "RS" (locks with power) Latch spacer increases cavity depth 1/16" STANDARDS: BHMA - A156.31, 2001 BHMA, Grade 1 - All models LC/RS except 334 & 3234W BHMA Grade 2-334 & 3234W LC Models utilize an external line conditioner (LC100) module to regulate input voltages, 12-24 AC or DC, and conditions the output for the pull-in activation period. Then reduces holding voltage output for continuous operation and reduced heat. The LC100 provides current surge (kickback) protection...$32.00 OPTIONS: Piezo Buzzer for "Standard Models" BZ-12 Audible buzzer for 12DC power...$11.00 BZ-24 Audible buzzer for 24DC power...$11.00 Piezo Buzzer for "LC Models" BZ-6 Audible buzzer for 6DC power...$12.00 VOLTAGE CURRENT/AMPS OHMS DUTY SOUND WIRE COLOR MODEL 12VDC.480 25 Intm. Blue STD. 24VDC.240 100 Intm. White STD. PULL IN/HOLD AMPS 12VDC.743/.298 13 Intm./Cont. Red LC 12VAC.715/.277 13 Intm./Cont. Red LC 24VDC.397/.170 13 Intm./Cont. Red LC 24VAC.378/.173 13 Intm./Cont. Red LC FACEPLATE MODEL - FINISH STRIKE MECHANISM HOW TO ORDER: 478-32D 3012 *Handing required for 458 and 478LO/RO Line Conditioner (LC) and Fail Safe (RS) Models: LC100 Module MODEL VOLTAGE FUNCTION DUTY LIST PRICE 3012 12DC Fail Secure Intm. $139.00 3024 24DC Fail Secure Intm. $139.00 MODEL VOLTAGE FUNCTION DUTY LIST PRICE 30LC 12-24 AC/DC Fail Secure Cont. $170.00 30RS 12-24 AC/DC Fail Safe Cont. $178.00 12

3000 Series The Smallest Electric Strike in the World! ONLY 1" TOTAL BACKSET... Product Application Specifications Finishes/Function Price 234 Smallest Electric Strike * ANSI 2 3/4" Standard 234-3 - Bright Brass $22.00 in the World * Face Plate 2-3/4" x 234-4 - Satin Brass $18.00 1-1/8" 234-10B - Dark Bronze $22.00 For new or replacement 234-26D - Satin Chrome $18.00 installations in metal frames. * Mortise Backset 1" Use with cylindrical locksets having up to 5/8" throw**, based on 1/8" door gap. * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" ** 1/16" thick shims for additional depth provided. 234X-375 Standard ANSI prep features an * ANSI 2 3/4" Standard 234X-3 - Bright Brass extended ramp to accomodate * Face Plate 2-3/4" x 1-1/8" 234X-10B - Dark Bronze additional face of Timely frames 234X-26D - Satin Chrome (or similar). Ramp is extended 3/8". * Mortise Backset 1" For new or replacement installations. Use with cylindrical locksets and deadlatches having up to 5/8" throw**, based on 1/8" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" door gap. $29.00 $29.00 $25.00 Provides a finished look for wood frames with trim. 258 80% LESS FRAME CUTTING when compared to typical 4 7/8" electric strike installations. For new or replacement installations in aluminum frames. Use with 4510, 4710 & 4750 Adams Rite dead latches. Replaces 4502 strike plate with slight frame modification. ** 1/16" thick shims for additional depth provided. * Face Plate 2-5/8" x 1-1/8" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" ** 1/16" thick shims for additional depth provided. 258-10B - Dark Bronze 258-26D - Satin Chrome $28.00 $24.00 334 For new or replacement installations in wood frames. Use with cylindrical locksets with up to 5/8" throw**, based on 1/8" door gap. * Face Plate 3-3/4" x 1-1/4" * Mortise Backset 1" * Cavity Depth 1/2" 334-3 - Bright Brass 334-4 - Satin Brass 334-26D - Satin Chrome $22.00 $18.00 $18.00 * Cavity Width 5/8" * Cavity Height 1 1/8" ** 1/16" thick shims for additional depth provided. 13

3000 Series Product Application Specifications Finishes/Function Price 458 The Smallest Electric Strike in the World! 478LO/ 478RO Right Hand shown Here ere ONLY 1" TOTAL BACKSET... 80% LESS FRAME CUTTING. Fills the frame preparation of Adams Rite MS Locks without relocating tabs for 6 5/8" or 6 7/8" electric strikes For new or replacement installations in aluminum frames. Replaces Adams Rite 4730/4501 strike plate with slight frame modification. 60% LESS FRAME CUTTING of Frame Face for ANSI 4 7/8" pre-prep frames. For new or replacement installations in wood, metal or aluminum frames. The strike opening on this face plate is offset by 3/16" the center to accomodate door sag. * Face Plate 4-5/8" x 1-9/16" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" ** 1/16" thick shims for additional depth provided. 458-10B - Dark Bronze 458-32D - Satin Stainless MUST SPECIFY LEFT OR RIGHT HAND * Face Plate 4 7/8" x 1-1/4" 478-10B - Dark Bronze * Mortise Backset 1" 478-26 - Bright Chrome 478-32D - Satin Stainless * Cavity Depth 1/2" RD option(radiused Corners) add * Cavity Width 5/8" * Cavity Height 1 1/8" MUST SPECIFY LEFT OR RIGHT HAND $41.00 $37.00 478 * ANSI A115.1 slight 478-3 - Bright Brass $45.00 frame modification 478-4 - Satin Brass $40.00 * Face Plate 4-7/8" x 1-1/4" 478-10B - Dark Bronze $40.00 $45.00 For new or replacement * Mortise Backset 1" 478-26 - Bright Chrome 478-32D - Satin Stainless $30.00 installation in wood, metal or * Cavity Depth 1/2" RD option(radiused Corners) add $ 5.00 aluminum frames. Use with * Cavity Width 5/8" cylindrical locksets having up to 5/8" throw**, based on 1/8" door gap. * Cavity Height 1 1/8" NEW: 1/8" Horizontal adjustment feature Available April 2008 60% LESS FRAME CUTTING of Frame Face for ANSI 4 7/8" pre-prep frames. ** 1/16" thick shims for additional depth provided. $40.00 $45.00 $30.00 $ 5.00 478X-375 Frame features an extended ramp to accomodate additional face of Timely frames (or similar). Ramp is extended 3/8". For new or replacement installations. Use with cylindrical locksets and deadlatches having up to 5/8" throw**, based on 1/8" door gap. Provides a finished look for wood frames with trim. ** 1/16" thick shims for additional depth provided. * ANSI A115.1 slight frame modification * Face Plate 4-7/8" x 1-1/4" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" ** 1/16" thick shims for additional depth provided. 478X-3 - Bright Brass 478X-10B - Dark Bronze 478X-32D - Satin Stainless RD option(radiused Corners) add $48.00 $42.00 $38.00 $ 5.00 14

3000 Series The Smallest Electric Strike in the World! HOW TO ORDER: Product Application Specifications Finishes/Function Price 3234 Smallest Electric Strike * Face Plate 2-3/4" x * LC Models Add $32.00 in the World Add $39.00 $166.00 3234W Model - Voltage - Finish 3234LC - 12DC - 26D For new or replacement installations in metal frames. Use with cylindrical locksets having up to 5/8" throw **, based on 1/8" door gap. For new or replacement installations in wood frames. Use with cylindrical locksets with up to 5/8" throw**, based on 1/8" door gap. 3258 80% LESS FRAME CUTTING when compared to typical 4 7/8" electric strike installations. For new or replacement installations in aluminum frames. Use with 4510, 4710 & 4750 Adams Rite dead latches. Replaces 4502 strike plate with slight frame modification. Right Hand 3458 80% LESS FRAME CUTTING. shown Here Fills the frame preparation of Adams Rite MS Locks without relocating tabs for 6 5/8" or 6 7/8" electric strikes For new or replacement installations in aluminum frames. Replaces Adams Rite 4730/4501 strike plate with slight frame modification. NEW: 1/8" Horizontal adjustment feature Available April 2008 1-1/8" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" * ANSI 2 3/4" Standard ** 1/16" thick shims for additional depth provided. * Face Plate 2-5/8" x 1-1/8" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" ** 1/16" thick shims for additional depth provided. * Face Plate 4-5/8" x 1-9/16" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" MUST SPECIFY LEFT OR RIGHT HAND ** 1/16" thick shims for additional depth provided. * RS (Fail Safe) Models * Bright Brass US3/BHMA605 * Satin Brass US4/BHMA606 * Dark Bronze US10B/BHMA640 * Satin Chrome US26D/BHMA652 * LC Models * RS (Fail Safe) Models * Satin Chrome US26D/BHMA652 * Dark Bronze US10B/BHMA640 * LC Models * RS (Fail Safe) Models * Satin Stainless Steel US32D/BHMA630 * Dark Bronze US10B/BHMA640 $162.00 $166.00 $162.00 Add $32.00 Add $39.00 $168.00 $172.00 Add $32.00 Add $39.00 $181.00 $185.00 3478 * Face Plate 4-7/8" x * LC Models Add $32.00 Add $39.00 $174.00 60% LESS FRAME CUTTING of Frame Face for ANSI 4 7/8" pre-prep frames. For new or replacement installation in wood, metal or aluminum frames. Use with cylindrical locksets having up to 5/8" throw**, based on 1/8" door gap. 15 * Face Plate 3-3/4" x 1-1/4" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" ** 1/16" thick shims for additional depth provided. 1-1/4" * Mortise Backset 1" * Cavity Depth 1/2" * Cavity Width 5/8" * Cavity Height 1 1/8" * ANSI A115.1 slight frame modification ** 1/16" thick shims for additional depth provided. *Handing required for 3458 and 3478LO/RO * LC Models * RS (Fail Safe) Models * Bright Brass US3/BHMA605 * Satin Brass US4/BHMA606 * Satin Chrome US26D/BHMA652 * RS (Fail Safe) Models * Satin Stainless Steel US32D/BHMA630 * Bright Brass US3/BHMA605 * Satin Brass US4/BHMA606 * Dark Bronze US10B/BHMA640 * Bright Chrome US26D/BHMA652 Add $32.00 Add $39.00 $166.00 $162.00 $162.00 $189.00 $184.00 $184.00 $189.00

3000 Series The Smallest Electric Strike in the World! ONLY 1" TOTAL BACKSET... FACEPLATE MODEL - FINISH STRIKE MECHANISM HOW TO ORDER: 478-32D 3012 *Handing required for 458 and 478LO/RO 234X-375 234 2 5/32" 1/8" 1 1/8" 1 1/32" 9/16" 5/8" 1/8" 1 1/32" 1 11/16" 1 1/8" 5/8" 5/8" 1 11/16" 1 9/16" 2 3/4" 1 11/16" 1 7/16" 2 3/4" 1" 2 1/8" 1" 2 1/8" 9/16" 9/16" 5/16" 5/16" 258 1/8" 1 11/16" 5/8" 334 1 1/4" 1 1/32" 3/4" 1 1/32" 1 5/16" 1 11/16" 1 1/8" 2 5/8" 1 11/16" 1 1/8" 3 3/4" 2 1/8" 3 1/8" 1" 1/4" 1" 9/16" 5/16" 9/16" 16

3000 Series The Smallest Electric Strike in the World! ONLY 1" TOTAL BACKSET... 458 478 1 15/16" 15/32" 1 1/32" 3/4" 3/4" 1 1/4" 3/4" 1 7/8" 7/64" 1 11/16" 1 1/8" 1 3/4" 4 5/8" 1 11/16" 1 1/32" 3 11/32" 4 7/8" 1" 4 1/8" 4 1/8" 1" 1/4" 3/8" 9/16" 5/8" 478X-375 1 1/4" 3/4" 478RO/LO 1 1/4" 3/4" 1 7/8" 1 1/32" 2 1/4" 1 1/32" 1 11/16" 3 11/32" 4 7/8" Center of Face Plate 1 11/16" 3/16" OFFSET 4 7/8" 1 1/8" 3 11/32" 1" 4 1/8" Center of Latch 1" 4 1/8" 3/8" 3/8" 5/8" 17 5/8" NOTE: RIGHT HAND SHOWN HERE

3000 Series The Smallest Electric Strike in the World! ONLY 1" TOTAL BACKSET... 234 Hollow Metal Frame 234 Wood Frame 1 1/8" 1 1/8" 5/8" 5/8" 1 1/2" 1 11/16" 2 1/8" 1 7/16" 2 3/4" 2 3/4" 5/8" 1 1/16" 17/32" NOTE: USE 2 INCH LONG (OR LONGER) WOOD SCREWS FOR MOUNTING 234X-375 Timely/Redi Frame 1 7/32" 234X-375 Wood Frame 1 9/32" 1 1/8" 1 19/32" 1 3/4" 1 3/4" 390 2 3/4" 1 19/32" 5/8" 2 3/4" 2 1/8" 18 5/8" 1 1/8" 1 1/16"

3000 Series The Smallest Electric Strike in the World! ONLY 1" TOTAL BACKSET... 258 Aluminum Frame 1 9/16" 334 Wood Frame 1 1/4" 7/16" 5/8" 1 1/8" 1 11/16" 3 3/4" 2 5/8" 1 1/64" 1 5/16" 1 1/16" 458 Aluminum Frame 478 Hollow Metal Frame 1 1/4" 1 9/16" 1/2" 5/8" 2 1/16" L E F T H A N D A S S H O W N 4 7/8" 3 3/8" 1 3/8" 1/8" 7/16" 4 5/8" H E R E 19

3000 Series The Smallest Electric Strike in the World! ONLY 1" TOTAL BACKSET... 478 Wood Frame 478X-375 Hollow Metal Frame 1 1/4" 1 1/4" 1 1/4" 1 1/4" 1 13/16" 1 3/4" 3 3/8" 3 3/8" 4 7/8" 1 1/4" 5/32" 9/32" 4 1/8" 4 7/8" 1 9/16" 9/16" 1 1/16" 3/4" 478X--375 Wood Frame 1 1/4" 1 1/4" 1 3/4" 4 1/8" 4 7/8" 3 3/8" 1 1/4" 15/32" 1 1/16" 20

3000 Series The Smallest Electric Strike in the World! 3234 ONLY 1" TOTAL BACKSET... ANSI SOLUTION 1 1/4" 3478 1 1/8" 1/8" 1 1/8" 1 1/2" 2 3/4" 5/8" 2-3/4" Strike Plate 3 3/8" 4 7/8" 4-7/8" Strike Plate 9/16" 1 1/4" 1 1/2" 2 3/4" 3234 Electric Strike 3 3/8" 4 7/8" 1 3/8" 3478 Electric Strike No need to remove Dust Box. 7/8" 3 3/8 " 4 7/8" Typical 4-7/8" Electric Strike 3 3/8" 7/8" 4 7/8" Typical 4-7/8" Electric Strike Must remove Dust Box. 3258 ALUMINUM SOLUTION 3458 2 5/8" 2-5/8" Strike Place 4 5/8" 4-5/8" Strike Plate 5/8" 2 1/16" 2 5/8 " 3258 Electric Strike EXISTING Tabs Used 1/2" 4 5/8" 3458 Electric Strike EXISTING Tabs Used 7/8" 1 1/4" 3 3/8 " 4 7/8" Typical 4-7/8" Electric Strike NEW Tabs Needed 7/8" 3 3/8" 6 7/8" Typical 6-7/8" Electric Strike NEW Tabs Needed BLUE = CUTTING 21

LIGHT COMMERCIAL 00 SERIES FEATURES Durability - 500,000 Life Cycles Holding Force - 1000 lbs Only 1 Moving Part in Locking Mechanism Non Handed Operation Heavy Duty Latch Spring Fail Secure-Standard Action (Unlocks with Power) ELECTRICAL CHARACTERISTICS Voltage 8-16VAC/4-6VDC 12VDC 24VAC 24VDC Amps 1.3-2.7.40 1.4.19 Ohms 1.4 30 4.7 125 Sound Buzz Buzz Duty Intm Intm/Co Intm Intm/Co Wire Color Black Red/White Red Black/White Product Application Specifications Finishes/Function Price 001 For use in new or Face Plate RS (Fail Safe) DC Add $20.00 replacement 5-7/8 x 1-1/4 Models installations in wood Mortise Backset Brass Powder $43.00 and metal jambs. 1-9/16 Coated For use with locksets Cavity Depth 1/2 Satin Chrome $49.50 having up to 5/8 Cavity Width 9/16 US26D/BHMA652 throw, based on 1/8 Cavity Height door gap. 1-1/2 002 For use in new or Face Plate RS (Fail Safe) DC replacement 7-15/16 x 1-7/16 Models installations in wood Auxiliary Ramp Aluminum Powder and metal jambs. 2-7/8 Coated Auxiliary lever rampsfor use with Mortise Backset Dark Bronze locksets which 1-9/16 Powder Coated contain dead Cavity Depth 1/2 lockinglevers. Use Cavity Width 9/16 with locksets having Cavity Height up to 5/8 throw, 1-1/2 based on 1/8 door gap. 003 For surface mount Surface Mount Fail Safe on DC installations on Case Models Add RS wood or metal jambs for in swinging 4-11/16 x 1-1/4 Gray Molded applications with Cavity Depth Cover surface mount. Use 1/2 with locksets and Cavity Width night latches having 9/16 up to 5/8 throw, based on 1/8 door Cavity Height gap. When mounted 1-1/2 on a pair of doors,strike is mounted to the inactive leaf. 004 For new or replacement installations in wood jambs. Use with locksets with individual deadbolts. Dead bolts cannot be released electrically. Use with locksets having up to 5/8 throw, based on 1/8 door gap. Face Plate 6-1/4 x 1-3/8 Deadbolt Knockouts Top & Bottom 1-11/16" x 9/16" Mortise Backset 2-3/4 Cavity Depth 1/2 Cavity Width 9/16 Cavity Height 1-1/2 Fail Safe (RS) on DC Models Brass - Powder Coated Satin Chrome US26D/BHMA652 Dark Bronze Powder Coated Add $20.00 $72.00 $78.00 Add $20.00 $78.50 Add $20.00 $82.00 $88.00 $88.00 22

LIGHT COMMERCIAL 00 SERIES Product Application Specifications Finishes/Function Price 005 For use in replacement installations in wood jambs and iron gates. Use with bored cylindrical locksets having up to 5/8 throw, based on 1/8 door gap. Face Plate 3-1/2 x 1-3/8 Mortise Backset 2-3/4 Cavity Depth 1/2 Cavity Width 9/16 Cavity Height 1-1/2 Fail Safe (RS) on DC Models Brass Powder Coated Satin Chrome US26D/BHMA652 Add $20.00 $53.00 $59.00 HD005 NEW Screwed-on Faceplate and reinforced Latch Pin provided for additional strength. For use in replacement installations in wood jambs and iron gates. Use with bored cylindrical locksets having up to 5/8 throw, based on 1/8 door gap. Face Plate 3-1/2 x 1-3/8 Mortise Backset 2-3/4 Cavity Depth 1/2 Cavity Width 9/16 Cavity Height 1-1/2 Fail Safe (RS) on DC Models Brass Powder Coated Satin Chrome US26D/BHMA652 Add $20.00 $65.00 $71.00 S005 For use in replacement installations in wood jambs and iron gates. Use with bored cylindrical locksets having up to 3/4 throw, based on 1/8" door gap. Face Plate 3-1/2 x 1-3/8 Mortise Backset 2-7/8 Cavity Depth 5/8 Cavity Width 23/32 Cavity Height 1-1/2 Fail Safe (RS) on DC Models Brass Powder Coated Satin Chrome US26D/BHMA652 Add $20.00 $64.00 $70.00 006 For surface mount installations on metal or wood jambs, for in swinging applications. Use with locksets or night latches having up to 5/8 throw, based on 1/8 door gap. When mounted on a pair or doors, strike is mounted to the inactive leaf. Case 2-1/8 x 1-3/16 Surface Mounted Die Cast Housing Cavity Depth 1/2 Cavity Width 1/2 Cavity Height 1-3/8" Fail Safe (RS) on DC Models Brass Powder Coated Add $20.00 $85.00 007 For use in new or replacement installations in wood jambs. Use with locksets having up to 3/4 throw, based on 1/8 door gap. Face Plate 4-7/8 x 1-1/4 Mortise Backset 2-7/8 Cavity Depth 5/8 Cavity Width 3/4 Cavity Height 1-1/2 Fail Safe (RS) on DC Models Brass Powder Coated Satin Chrome US26D/BHMA652 Add $20.00 $90.00 $96.00 23

LIGHT COMMERCIAL ANSI 01 SERIES FEATURES Durability - 300,000 Life Cycles Holding Force - 1200 lbs Solid Brass Locking System Cast Steel Latch Heavy Duty Latch Spring Solenoid Actuated Product Application Specifications Finishes/Function Price 012 For new or Face Plate RS (Fail Safe) Add $30.00 4-7/8 x 1-1/4 Mortise Backset $101.00 1-5/8 replacement installations in metal jambs. Use with locksets having up to 5/8 throw, based on 1/8 door gap. ELECTRICAL CHARACTERISTICS Voltage 10-16VAC 6-12VDC 24VAC 24VDC Current/Amps.60-.90.50-1.0.42.20 Ohms 10.0 10.0 47.0 119.0 Cavity Depth 9/16 Cavity Width 9/16 Cavity Height 1-1/2 Models - 24DC Brass Powder Coated Satin Chrome US26D/BHMA652 Dark Bronze US10B/BHMA640 Sound Buzz Buzz Duty Intm Intm Intm Intm/Co $103.00 $103.00 S01 For new or replacement installations in metal jambs. Use with locksets having up to 3/4 throw, based on 1/8 door gap. Face Plate 4-7/8 x 1-1/4 Mortise Backset 1-5/8 Cavity Depth 5/8 Cavity Width 3/4 Cavity Height 1-1/2 RS (Fail Safe) Models - 24DC Brass Powder Coated Satin Chrome US26D/BHMA652 Dark Bronze US10B/BHMA640 $30.00 $118.00 $122.00 $122.00 Miniature Design Die Cast Case Solid Cast Latch - Chrome Plated Non Handed Heavy Duty Latch Spring ELECTRICAL CHARACTERISTICS Voltage 10-16VAC 12VDC 24VAC 24VDC Amps.820-1.44.184.895.100 Ohms 6.8 65.0 14.0 240.0 Sound Buzz Buzz Duty Wire Color Intm Black Intm/Cont Red/White Intm Red Intm/Cont Black/White Product Application Specifications Finishes/Function Price 014 For new or replacement Face Plate 2-3/4 x 1-1/8 Brass Powder Coated $75.00 installations in metal Mortise Backset Satin Chrome $81.00 jambs. Use with 1-1/4 US26D locksets having up to Cavity Depth 1/2 5/8 throw, based on 1/8 door gap. Cavity Width 5/8 Cavity Height 1-1/8 014W For new or replacement installations in wood jambs. Use with locksets having up to 5/8 throw, based on 1/8 door gap. Face Plate 5-7/8 x 1-1/8 Mortise Backset 1-1/4 Cavity Depth 1/2 Cavity Width 5/8 Cavity Height 1-1/8 Brass Powder Coated Satin Chrome US26D $77.00 $83.00 24

ADJUSTABLE LATCH 2000 SERIES FEATURES Allows adjustment for wider latch bolts & poorly aligneddoors & locksets 1/8 Horizontal Latch Adjustment Releases Under Door Pre-Load Durability - 500,000 Life Cycles Holding Force - 900 lbs Solid Cast Latch - Chrome Plated Non Handed Operation Screw Terminals - Quick Connection Adjustable Latch + + Removable Dust Shield ELECTRICAL CHARACTERISTICS Voltage 6-14 VAC 6-14VDC 16-24VAC 16-24VDC 12VDC 24VDC Current/Amps.440-1.10.700-1.60.220-.330.320-.470.200.110 Ohms 8.5 8.5 50 50 60 220 Sound Buzz Buzz Duty Intm Intm Intm Intm Intm/Cont Intm/Cont Product Application Specifications Finishes/Function Price 2001 For use in new or replacement wood or metal jamb installations with locksets having up to 5/8 throw, based on 1/8 door gap. Face Plate 5-7/8 x 1-1/4 Narrow Style Face Plate Mortise Backset 1-9/16 Cavity Depth 9/16 Cavity Width 5/8 Cavity Height 1-11/16 Brass Powder Coated Satin Chrome US26D $77.00 $83.00 2002 For use in new or replacement Face Plate 7-15/16 x aluminum or hollow metal jamb 1-7/16 installations. Auxiliary lever ramps Auxiliary Ramp Height for use with locksets containing 2-7/8 dead-locking levers. Use with Mortise Backset 1-9/16 latch bolts having up to 5/8 throw, Cavity Depth 9/16 based on 1/8 door gap Cavity Width 5/8 Cavity Height 1-11/16 Fail Safe (RS) on DC Models Aluminum Powder Coated Dark Bronze Powder Coated Add $20.00 $93.00 $99.00 2002WR For use in new or replacement aluminum or hollow metal jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Use with locksets having up to 5/8 throw, based on 1/8 door gap. Steel Face Plate 7-15/16 x 1-7/16 Auxiliary Ramp Height 2-3/8 Mortise Backset 1-9/16 Cavity Depth 9/16 Cavity Width 5/8 Cavity Height 1-11/16 Fail Safe (RS) on DC Models Aluminum Powder Coated Dark Bronze Powder Coated Add $20.00 $ 96.00 $102.00 2007 For use in new or replacement installations in metal jambs. Fits a standard 4-7/8 ANSI prep with little jamb modification. Use with locksets having up to 5/8 throw, based on 1/8 door gap. Steel Face Plate 4-7/8 x 1-1/4 Narrow Style Face Plate Mortise Backset 1-9/16 Cavity Depth 9/16 Cavity Width 5/8 Cavity Height 1-11/16 Fail Safe (RS) on DC Models Brass Powder Coated Satin Chrome US26D Add $20.00 $ 96.00 $102.00 25

ADJUSTABLE LATCH 2000 SERIES Product 200 Application For use in new or replacement installations in metal jambs. Centerline of the latch is 3/8 below ANSI centerline for offset applications. Fits a standard 4-7/8 ANSI prep with little jamb modification. Use with locksets having up to 5/8 throw, based on 1/8 door gap. Specifications Finishes/Function Price Steel Face Plate 4-7/8 x 1-1/4 Narrow Style Face Plate Mortise Backset 1-9/16 Cavity Depth 9/16 Cavity Width 5/8 Cavity Height 1-11/16 Fail Safe (RS) On DC Models Brass - Powder Coated Bright Chrome US26 Add $20.00 $103.00 $109.00 2012 For use in new or replacement, aluminum or hollow metal jamb installations with locksets having up to 5/8 throw, based on 1/8 door gap. Steel Face Plate 4-7/8 x 1-1/4 Auxiliary Ramp 3-3/8 Mortise Backset 1-9/16 Cavity Depth 9/16 Cavity Width 5/8 Cavity Height 1-11/16 Fail Safe (RS) On DC Models Satin Brass US4 Bright Chrome US26 Satin Chrome US26D Dark Bronze US10B Add$20.00 $105.00 $112.00 $103.00 $112.00 2678 For use in new or replacement aluminum or hollow metal jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Useful when converting an MS Lock to a dead latch. Up to 5/8 throw, based on 1/8 door gap. Face Plate 6-7/8 x 1-1/4 Auxiliary Ramp 3-3/8 Mortise Backset 1-9/16 Cavity Depth 9/16 Cavity Width 5/8 Cavity Height 1-11/16 Fail Safe (RS) On DC Models Satin Aluminum US28/BHMA628 Satin Bronze US10/BHMA639 Add $20.00 $105.00 $112.00 LIGHT COMMERCIAL 2000 SERIES FEATURES Releases Under Door Pre-Load Durability - 500,000 Life Cycles Holding Force - 1000 lbs Non Handed Operation Heavy Duty Latch Spring Screw Terminals - Quick Connection ELECTRICAL CHARACTERISTICS Voltage 6-12VAC 6-12VDC 14-24VAC 14-24VDC Current/Amps.495-1.09.650-1.24.27-.48.38-.61 Ohms 5.2 5.2 37 37 Sound Buzz Buzz Duty Intm Intm Intm Intm Product Application Specifications Finishes/Function Price 1001-2 For use in new or replacement Steel Face Plate Brass - Powder $57.00 installations in wood and metal 5-7/8 x 1-1/4 Coated jambs. For use with locksets Narrow Style Face Plate Mortise Backset 1-1/2 Satin Chrome $63.00 having up to 5/8 throw, based on 1/8 door gap. Cavity Depth 9/16 US26D/BHMA652 Cavity Width 9/16 Cavity Height 1-11/16 1002-2 For use in new or replacement installations in wood and metal jambs. Auxiliary lever ramps for use with locksets which contain dead locking levers. For use with locksets having up to 5/8 throw, based on 1/8 door gap. Face Plate 7-15/16 x 1-7/16 Auxiliary Ramp 2-7/8 Height Mortise Backset 1-1/2 Cavity Depth 9/16 Cavity Width 9/16 Cavity Height 1-11/16 Aluminum - Powder Coated Dark Bronze - Powder Coated $82.00 $88.00 26

WIRELESS CHIMES Product Specifications Price 234WB STROBE CHIME See Your Door Ring!! Sound and Sight - 8 note Westminster or 2-note sound with flashing parallel light Simply plug-in - as many as desired wherever desired Volume control- adjust to desired intensity Up to 100 ft. operating range A23 battery included FCC-IC approved, UL, CSA recognized 128 selectable channels - avoid false triggering 80db at 3 feet at max setting 6 Foot-Candles strobe output $76.00 232 BATTERY OPERATED Requires 3 C batteries (not included) Opal white color Up to 100ft operating range 64 selectable security codes Field selectable 2 note or 1 note A-23 battery included FCC-IC approved $28.00 233 PLUG-IN Plugs into 120VAC outlet Opal white color 128 selectable security codes Field selectable 8 note or 2 note Up to 100 ft. operating range A-23 battery included UL recognized, FCC-IC approved $34.00 235 WIRELESS MECHANICAL TRADITIONAL TONE BAR SOUND THE EASE OF WIRELESS TECHNOLOGY Only Wireless Mechanical Door Chime on the market Up to 125 ft range 128 selectable security codes Battery operated requiring 4 C batteries (not included) Field selectable push button 2 note or 1 note A-23 battery included Low battery indicator FCC-IC approved $50.00 27

WIRELESS CONTROLLERS & TRANSMITTERS PRODUCT 017TDC-2 PRODUCT 017TDC-3 PRODUCT 018-2 N E W N E W N E W Price $ 75.00 Price $ 95.00 Price $ 33.00 Specifications Specifications Specifications 100 foot range Time Delay 5-30 Seconds One 5 amp Normally Open and Normally Closed contacts, rated at 12 thru 30 volts AC/DC Superheterodyne low radiant receiver New items will be available in May 2008 300 foot range Time Delay 5-30 Seconds Two 5 amp Normally Open and Normally Closed contacts, rated at 12 thru 30 volts AC/DC Relays can be coupled to work simultaneously or individually controlled by the 018-2's buttons. Superheterodyne low radiant receiver 6561 security codes available LED indicates operation Belt clip key ring provided Operates on 315 Mhz A-23 Battery Included FCC, ICApproved Not backward compatible with with 017TDC and 018-1 PRODUCT Price $80.00 Specifications DISCONTINUED IN 2008 Time Delay 5-30 Seconds 3 amp Normally Open and Normally Closed wet contacts, rated at 12 thru 24 volts AC/DC 1 amp Auxiliary Normally Open & Normally Closed dry contacts, rated at 6-24 volts DC Superheterodyne low radiant receiver 017TDC PRODUCT 018-1 Price DISCONTINUED IN 2008 Specifications Up to 125 foot range 6561 security codes available LED indicates operation Belt clip key ring provided Operates on 318 Mhz FCC, ICApproved $ 35.00 WIRELESS CONTROLLER KITS PRODUCT: 017-1805 017TDC/018-1 w/ additional transformer FCC/IC approved 5205 tri-volt transformer 8-16-24 AC plug-in type 017TDC receiver, 018-1 transmitter PRODUCT: 017-1808 017TDC/018-1 w/ additional transformer FCC/IC approved 5208 tranformer 12DC plug-in type 017TDC receiver, 018-1 transmitter PRODUCT: 017-1809 017TDC/018-1 w/ additional transformer FCC/IC approved 5209 tranformer 24DC plug-in type 017TDC receiver, 018-1 transmitter PRODUCT: 032 017TDC/018-1 w/ additional transformer & 3234, 2-3/4 ANSI electric strike 3234-24DC-26D electric strike 5209 plug-in type 24VDC transformer 017TDCwireless receiver, 018-1 transmitter PRODUCT: 034 017TDC/018-1 w/ additional transformer & 3478, 4-7/8 ANSI electric strike 3478-24DC-32D electric strike 5209 plug-in type 24VDC transformer 017TDCwireless receiver, 018-1 transmitter Price $131.00 $133.00 $133.00 $298.00 $310.00 28

DOOR ALARMS, SWITCHES & MOTION ALERTS Product Specifications Price 206-2 MOTION ALERT ANNUNCIATOR 215 WINDOW/DOOR ENTRY ALARM KIT Moving objects are detected by changes in reflected light Battery operated with 2 C cells (not included) Ready for mounting 3 selectable tones, 8 note melody,2 note repeated, 2 note alternating tone Off, high &low volume control switch 77db (low) and 84db (high) @ 3 ft Durable white molded plastic case3-1/6 x 4-3/8 x 2-3/8 N/O magnetic contact switch activates alarm User can set for Chime or 105db alarm sound No wiring On/Off switch (3) L1154 batteries (included) Contacts provided with mounting tape $27.00 $9.50 206-3 WIRELESS ENTRY/EXIT SIGNAL KIT 340 ELECTRIC DOOR SWITCH 1 note, 2 note or 8 note melody chime, field selectable Wireless battery-operated door contact switch A-23 battery (included) Up to 100ft range 128 selectable codes Receiver plugs into 120 VAC outlet Transmitter mounting hardware provided Adjustable volume control 74db (low) 82db (high) @ 3ft UL recognized, FCC-IC approved Face plate brass finish 4 H x 1-1/2"W Box 3 H x 1-3/8 W x 1-3/4 D Switch Rating: 120VAC, 10 Amps 250VAC, 5 Amps Field selectable N/C or N/O Stamped steel case UL, CSA listed switch & wireleads Faceplate Powder Coated Brass 4 - knockouts 7/8 $46.00 $17.50 342 ELECTRIC DOOR SWITCH NARROW STYLE Face plate brass finish 3-7/8 H x 1-1/4"W Box 2-5/8 H x 1-3/16 W x 2-1/8 D Switch Rating: 120VAC, 10 Amps 250VAC, 5 Amps Field selectable N/C or N/O Stamped steel case UL, CSA listed switch & wireleads Faceplate Powder Coated Brass 4 - knockouts 7/8 29 $17.50

DOOR CHIMES, BELLS, BUZZERS & CHIME KITS Product Specifications Price 201 CHIME KIT (1) White chime base (2) Unlighted 66W white push buttons (1) 16VAC-10VA Hardwire transformer Mounting hardware included, excluding wire Offers 2 note front door/1 note rear door ability $25.00 203 CHIME KIT 240 CHIME 296 CHIME 270 BUZZER 272 BELL 274 BELL 275 ENCLOSED BELL 276 ENCLOSED BELL & BUZZER (1) White chime base (1) Lighted 45LG push button (1) 16VAC-10VA Hardwire transformer Mounting hardware included, excluding wire Offers 2 note front door/1 note rear door ability Chime base with solid white cover Offers 2 note front door/ 1 note rear door ability Operating voltage 12-24VAC Mounting base hardware provided 80 db sound at 3 feet Outer dimension 7-1/4 x 4-3/4 x 1-7/8 Chime base with solid white cover Offers 2 note front door/1 note rear door ability Operating voltage 12-16VAC Mounting base hardware included 75db sound at 3 feet Outer dimension 1-1/8 x 4 x 2 Enclosed buzzer 92db sound at 3 feet Operating range 3-6VDC, 8-16 VAC, 1 Amp draw Bright chrome finish Includes mounting hardware 100 db sound at 3 feet Operating range 3-6VDC, 8-16 VAC, 1 Amp draw Bright chrome finish Includes mounting hardware 2-1/2" open bell 100 db sound at 3 feet Operating range 3-6VDC, 8-16 VAC, 1 Amp draw Bright chrome finish Includes mounting hardware 4" open bell 88 db at 3 feet Operating range: 3-8VDC, 1.4 Amp draw 6-8VAC, 0.7 Amp draw Gray finish Includes mounting hardware 88 db at 3 feet Operating range: 3-8VDC, 1.4 Amp draw 6-8VAC, 0.7 Amp draw Gray finish Includes mounting hardware $25.00 $28.00 $18.00 $12.00 $13.00 $16.00 $18.00 $22.00 30

LOW VOLTAGE TRANSFORMERS For electric strikes, bells, buzzers, chimes, and other low voltage devices. A complete line of U.L. listed step down transformers. Easy to install, low voltage, 120AC primary for residential, commercial and industrial uses. Transformers will safely take themselves off line when they overheat. Transformers can be either base mounted or attached to standard knockouts on boxes or cabinets (except plug-in types.) All primary leads are pre stripped for quick connection. Illustrations Illus. # Prod. Description Electrical Characterisitics Price 2 521 CLAMP ON TYPE/TRI VOLT(AC) 16VAC $15.00 Equipped with convenient screw-bracket mounting clamp for standard 1/2 knockouts 15VA 120 volt primary AC.93 AMPS 1-7/8 D x 2-3/16 H x 2-3/8 W 10oz 1 1 522 LOCKNUT TYPE (AC) 16VAC For standard 1/2 knockouts 120 volt primary AC 10VA 2-5/32 D x 2-1/2 H x 2 W 8oz.625 AMPS $13.75 3 2 2 525 CLAMP ON TYPE/TRI VOLT (AC) 8VAC 16VAC 24VAC $21.00 Equipped with convenient screw-bracket mounting clamp for standard 1/2 knockouts 10VA 10VA 20VA 120 volt primary AC 1.25 AMPS.62 AMPS.83 AMPS 2-1/4 D x 2-3/16 H x 2-5/16 W 13oz 2 598 CLAMP ON TYPE/TRI VOLT (AC) 8VAC 16VAC 24VAC $25.00 Equipped with convenient screw-bracket mounting clamp for standard 1/2 knockouts 20VA 30VA 30VA 120 volt primary AC 2.5 AMPS 1.88 AMPS 1.25 AMPS 2-15/16 D x 2-7/32 H x 2-11/32 W 1lb 6oz 2 599 CLAMP ON TYPE (AC) 24VAC Equipped with convenient screw-bracket mounting clamp for standard 1/2 knockouts 40VA 120 volt primary AC 1.65 AMPS 2-15/16 D x 2-3/16 H x 2-11/32 W 1lb 6oz 3 5201 PLUG-IN TYPE (AC) 24VAC 120 volt primary AC 2 D x 3 H x 2-1/2 W 7oz 20VA.834 AMPS $26.00 $21.00 4 3 5203 PLUG-IN TYPE (AC) 16VAC 120 volt primary AC 2 D x 3 H x 2-1/2 W 7oz 20VA 1.250AMPS 3 5204 PLUG-IN TYPE (AC) 12VAC 120 volt primary AC 2 D x 3 H x 2-1/2 W 7oz 20VA 1.667 AMPS $21.00 $21.00 4 5205 PLUG-IN TYPE /TRI VOLT (AC) 8VAC 16VAC 24VAC $27.00 120 volt primary AC 2 D x 3 H x 2-1/2 W 1lb 10VA 10VA 20VA 1.25 AMPS.62 AMPS.83 AMPS 5 5 5208 PLUG-IN TYPE (DC) 12VDC Corded output leads 120 volt primary AC 12VA 2 D x 3-1/4 H x 2-3/8 W 1lb 12oz 1.0 AMPS 5 5209 PLUG-IN TYPE (DC) 24VDC Corded output leads 120 volt primary AC 12VA 2 D x 3-1/4 H x 2-3/8 W 1lb 2oz.5 AMPS $29.00 $29.00 6 6 SR1 SILICON RECTIFIER (SR-1) 12-27VAC For converting AC voltage to DC voltage For AC power supplies up to 27 volt AC 1 amp. 1 AMP Note: DC electric strikes do not buzz, click only. Size 1 x 1/2 x 1 31 $24.00

PUSH BUTTONS LIGHTED & UN-LIGHTED (must be ordered in 10 pack quantity) Illustrations Illus. # Prod. Description Electrical Characterisitics Price 1 JRP Polished Solid Brass w/ black center for use up to 30 $5.15 1-3/4 Body Diameter 1 3 5 2 4 6 1 SRP Polished Solid Brass w/ black center for use up to 30 2-1/4 Body Diameter 2 45A Silver Rim with Pearl Center for use up to 30 5/8 Body Diameter 2 45G Gold Rim with Pearl Center for use up to 30 5/8 Body Diameter 2 45LA Silver Rim with Lighted Pearl Center for use up to 16 5/8 Body Diameter 2 45LG Gold Rim with Lighted Pearl Center for use up to 16 5/8 Body Diameter 3 65P Weatherproof Polished Solid Brass for use up to 30 2-1/2 Body Diameter *Single Pack 4 66B Black with White Bar Molded Plastic for use up to 30 2-3/4"L X 3/4"W X 5/8"H 4 66C Silver w/ White Bar Molded Plastic for use up to 30 2-3/4"L X 3/4W" X 5/8"H 4 66G Gold w/ White Bar Plated Molded Plastic for use up to 30 2-3/4"L X 3/4"W X 5/8"H 4 66W White with White Bar Molded Plastic for use up to 30 2-3/4"L X 3/4W" X 5/8"H 4 66LB Lighted Black w/ White Bar Molded Plastic for use up to 16 2-3/4"L X 3/"4W X 5/8"H 4 66LC Lighted Silver w/ White Bar Plated Molded Plastic for use up to 16 2-3/4"L X 3/4W" X 5/8"H 4 66LG Lighted Gold w/ White Bar Plated Molded Plastic for use up to 16 2-3/4"L X 3/4"W X 5/8"H 4 66LW Lighted White w/ White Bar Molded Plastic for use up to 16 2-3/4"L X 3/4"W X 5/8"H 5 71A Anodized Aluminum Housing w/ Black Bar for use up to 30 2-3/4"L X 1"W X 3/4"H 5 71G Anodized Brass Aluminum Housing w/ Black Bar for use up to 30 2-3/4"L X 1"W X 3/4"H 5 71LA Lighted Anodized Aluminum Housing w/ White Bar for use up to 16 2-3/4"L X 1"W X 3/4"H 5 71LG Lighted Anodized Brass Aluminum Housing for use up to 16 w/ White Bar 2-3/4"L X 1"W X 3/4"H 6 *91P Multi-Family, Polished Solid Brass Housing for use up to 30 4-3/4"L X 5/8"W X 3/4"H *Must be ordered in 5 pack quantity 3-Button Multi-Family, Polished Solid Brass 6 *94P for use up to 30 Housing 7"L X 5/8"W X 3/4"H *Must be ordered in 5 pack quantity 32 $5.35 $3.60 $3.60 $5.65 $5.65 $40.00 $3.60 $3.60 $3.60 $3.60 $6.40 $6.40 $6.40 $6.40 $6.35 $6.35 $7.15 $7.15 $12.85 $14.95

GLOSSARY ALTERNATING CURRENT (AC) An electric current that reverses direction in a circuit at regular intervals. CONTINUOUS DUTY A device that is designed to operate continuously without rest. CURRENT Measured flow of electrons through an electrical conductor. Normally measured in amperes. DIRECT CURRENT An electric current flowing in one direction. DOOR HANDING LEFT HAND (LH) FAIL SAFE LEFT HAND REVERSE BEVEL (LRB) A device that is normally open and locks when power is applied to the unit. Example: During a loss of power the device remains open. FAIL SECURE A device that is normally closed or locked until power is applied. Example: During a loss of power the device remains locked. FUSE A device that is placed in the path of energy that will break the circuit if the current becomes too great. This is accomplished by having a strip or metal that will melt when the current exceeds the required amount. INTERMITTENT DUTY A device that is designed to operate for a short period of time; generally less that 45 seconds. Dead Latch LOCKSET TYPES Cylindrical Lock Mortise Lock Rim Panic Exit OUTSIDE OUTSIDE Mortise Rim Panic Exit RIGHT HAND (RH) RIGHT HAND REVERSE BEVEL (RRB) HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE. NORMALLY OPEN The contacts of a switch or relay are normally open or not connected. When activated the contacts close or become connected. EXAMPLE: A switch is not depressed and the circuit is not complete. NORMALLY CLOSED The contacts of a switch or relay are normally closed or connected. When activated the contacts open or become disconnected. EXAMPLE: A switch is not depressed and the circuit is complete. OHMS The measure of resistance of an electrical device to resist the flow of energy. RECTIFIER A device that is commonly used to convert AC to DC. Commonly used to silence the audible sound that an electrical strike can make while energized on AC current. RELAY An electro-magnetic device activated by a variation in conditions in one electric circuit and controlling a larger current or actuating other devices in the same or another electric circuit. STANDARD VOLTAGE Electric door strike supplied with magnetic coils: 4-6VDC/8-16VAC. Electric door strikes supplied with a solenoid coil: 6-10VDC, 10-16VAC: other voltages available (See Electrical Characteristics Chart). TRANSFORMER A device consisting essentially of two or more coils of insulated wire that transfers alternating current by electro -magnetic induction from one winding to another at the same frequency, but usually with changed voltage & current. VOLT A unit of electric potential equal to the difference of electric potential between two points that have a resistance of one ohm and through which a current of one amperes is flowing. VOLTAGE DROP? We recommend the following wire sizes: Wire Length 12V 24V Up to 50 ft. 18 AWG 20 AWG 51-150 ft. 16 AWG 18 AWG 151-300 ft. 14 AWG 16 AWG 301-600 ft. 12 AWG 14 AWG WATT The power developed in a circuit by a current of one ampere flowing through a potential difference of one volt. 33

NOTES 34

CONDITIONS OF SALE Distributors and Other Commercial Customers Note: The following Conditions of Sale are subject to change: All Sales Transactions are subject to the latest published Conditions of Sale of the Trine Access Technology Corporation and to any Special Conditions of Sale which may be contained in applicable Trine quotations and acknowledgements. Modified product warranties are provided to consumers. 1. ACCEPTANCE, GOVERNING PROVISIONS AND CANCELLATIONS. No order for Trine Access Technology or services shall be binding upon Trine until accepted by a writing of an authorized official of Trine or by shipment or other performance of such order. Any such order shall be subject to these Conditions of Sale, and acceptance shall be expressly conditioned on assent to such Conditions, which assent shall be deemed given unless purchaser shall expressly notify Trine to the contrary prior to the earlier of any shipment or other performance of an order by Trine or within five (5) days after purchaser's receipt of any acknowledgement or confirmation of such order. Trine expressly reserves the right to reject and withdraw acceptance of any order. No order accepted by Trine may be altered or modified by purchaser unless agreed to in a writing signed by an authorized official of Trine; and no such order may be cancelled or terminated except upon payment of Trine's loss, damage and expense arising from such cancellation or termination. These Conditions of Sale may not be supplemented or modified by course of dealing, course of performance or any oral communication between the parties. No modified or other conditions will be recognized by Trine unless specifically agreed to in writing and failure of Trine to object to provisions contained in any purchase order or other communication from a purchaser (including, without limitation, penalty clauses of any kind) shall not be construed as a waiver of these Conditions nor an acceptance of any such provisions. Unless otherwise agreed in writing by a duly authorized representative of Trine, products sold hereunder are not intended for use or in connection with a nuclear facility or activity. If so used, Trine disclaims all liability for any nuclear damage, injury or contamination, and purchaser shall indemnify Trine against any such liability, whether as a result of breach of contract, warranty, tort (including negligence) or otherwise. Any contract for sale and these Conditions shall be governed by and construed according to the laws of the State of New York. Any dispute arising out of or relating to these Conditions of Sale or any matter relating hereto shall be brought in the federal or state courts sitting in or for the Bronx, New York, and the parties waive any objection they may have to the jurisdiction or subject matter of these courts. 2. QUOTATIONS AND PRICES. Written quotations are conditioned upon acceptance by purchaser within thirty (30) days from the date issued and shall be considered as offers by Trine to sell during such thirty (30) day period on these Conditions of Sale unless sooner terminated by notice. Other Trine publications are maintained as sources of general information and are not quotations or offers to sell. All clerical errors are subject to correction. MINIMUM ORDER: $75.00 Net. DROP SHIP FEE: Trine reserves the right to charge a fixed fee of $10.00 for shipping to an address other than customers. All prices are subject to change without notice. In the event of a net price change, the price of equipment on order but unshipped will be adjusted to the price in effect at the time of shipment. Downward adjustment of prices shall apply only to unshipped portions of outstanding orders. 3. PAYMENT TERMS. Unless otherwise agreed by Trine, terms of payment for Trine products to purchasers of satisfactory credit are either (1) a 1% cash discount for all invoices paid in full if the payment is received by Trine within 10 days after the date of Trine's invoice or (2) full payment to be received by Trine within 30 days after the date of Trine's invoice. Applicable terms of payment are stated in quotations or on the discount sheet for the product involved. Cash discount will apply only to the net amount of the invoice after transportation charges and taxes. A late charge of 1% per month or the maximum amount permitted by law will be applied to all past due amounts. Trine reserves the right at any time to demand full or partial payment before proceeding with a contract of sale if, in its judgment, the financial condition of purchaser shall not justify the terms of payment specified. If delivery is delayed or deferred by purchaser beyond the scheduled ate, payment shall be due in full when Trine is prepared to ship and the products may be stored at the risk and expense of purchaser. If purchaser defaults when any payment is due, then the whole contract price shall become due and payable upon demand, or Trine, at its option, without prejudice to other lawful remedies, may defer delivery or cancel the contract for sale. 4. TAXES AND OTHER CHARGES. Any manufacturer's tax, retailer's occupation tax, use tax, sales tax, excise tax (except the Federal excise tax on vehicles), duty, custom, inspection or testing fee, or other tax, fee or charge of any nature whatsoever, imposed by any governmental authority, on or measured by any transaction between Trine and purchaser, shall be paid by purchaser in addition to the prices quoted or invoiced. In the event Trine shall be required to pay any such tax, fee or charges, purchaser shall reimburse Trine therefor; or, in lieu of such payment, purchaser shall provide Trine at the time the order is submitted with an exemption certificate or other document acceptable to the authority imposing the same. Purchase orders must state the existence and amount of any such tax, fee or charge which it shall be Trine's responsibility to collect from purchaser and pay. 5. DELIVERY. Delivery of products to a carrier at any Trine facility or other shipping point shall constitute delivery to purchaser; and, regardless of freight payment, title and all risk of loss or damage in transit shall pass to purchaser at that time. Trine cannot be held responsible for breakage after having received "in good order" receipts from the transportation company. All claims for loss and damage must be made by purchaser to the carrier. Claims for shortages or other errors must be made in writing to Trine within 15 days after receipt of shipment, and failure to give such notice shall constitute unqualified acceptance and a waiver of such claims by purchaser. Unless otherwise agreed by Trine in quotations, discount schedules, catalogs or other Trine publications, all expenses of freight FOB Trine's place of shipment shall be borne by purchaser. No allowance will be made in lieu of transportation if purchaser accepts shipment at factory, warehouse, freight station, or otherwise supplies its own transportation. Method and route of shipment will be at the discretion of Trine unless purchaser shall specify otherwise, and any additional expense of the method or route of shipment specified by purchaser shall be borne by purchaser. Trine reserves the right to make delivery in installments, unless otherwise expressly stipulated in the contract for sale; and all such installments when separately invoiced shall be paid for when due per invoice, without regard to subsequent deliveries. Delay in delivery of any installment shall not relieve purchaser of its obligations to accept remaining deliveries. 6. SUBSTITUTES. Trine may furnish suitable substitutes for materials unobtainable because of priorities or regulations established by governmental authority or non-availability of materials from suppliers, and assumes no liability for deviation from published dimensions and descriptive information not essential to proper performance of the products. 7. WARRANTIES TO DISTRIBUTORS AND OTHER COMMERCIAL CUSTOMERS. Trine warrants products manufactured by it to be free from defects in materials and workmanship for a period of one (1) year from date of shipment by Trine, except for all Axion (R) labeled products which are covered for two (2) years from date of shipment by Trine. If within such period any such products shall be proved to Trine's satisfaction to be so defective, such products shall be repaired or replaced at Trine's option. This warranty shall not apply (a) to products not manufactured by Trine, (b) to products which shall have been repaired or altered by other than Trine so as, in its judgment, to affect the same adversely, or (c) to equipment which shall have been subjected to negligence, accident or damage by circumstances beyond Trine's control, or to improper operation, maintenance or storage, or to other than normal use or service. With respect to products not manufactured by Trine, the warranty obligations of Trine shall in all respect conform and be limited to the warranty actually extended to Trine by its supplier. The foregoing warranties do not cover reimbursement for transportation, removal, installation, or other expenses which may be incurred in connection with repair or replacement. Except as may be expressly provided in an authorized writing by Trine, Trine shall not be subject to any other obligations or liabilities whatsoever with respect to products manufactured by Trine or services rendered by Trine. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 8. LIMITATION OF LIABILITY. Anything to the contrary herein contained notwithstanding, TRINE ACCESS TECHNOLOGY, ITS CONTRACTORS AND SUPPLIERS OF ANY TIER SHALL NOT BE LIABLE IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE FOR ANY SPECIAL, INDIRECT, INCIDENTAL CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES WHATSOEVER. The remedies of the purchaser set forth herein are exclusive where so stated and the total cumulative liability of Trine, its contractors and suppliers of any tier, with respect to this contract or anything done in connection therewith, such as the use of any product covered by or furnished under the contract, whether in contract, in tort (including negligence or strict liability) or otherwise, shall not exceed the price of the product or part on which such liability is based. Further, any claim purchaser may have with reference to Trine products or services sold or provided hereunder shall be deemed waived by purchaser unless asserted against Trine in writing within 90 days from the date the purchaser discovered, or should have discovered, the basis for the claim. 9. RETURN OF EQUIPMENT. No products may be returned without first obtaining Trine's written permission and a returned goods authorization number. Products accepted for credit, not involving a Trine error, shall be subjected to a minimum service charge of $25.00, or a charge of 15% of invoice, whichever is greater, plus all transportation charges incurred by Trine. THE MINIMUM RESTOCKING CHARGE IS $25.00. Returned products must be securely packed to reach Trine without damage, any cost incurred by Trine to put the products in first class condition will be charged to purchaser. 10. PATENTS. As to products sold to purchaser by Trine, Trine shall defend any suit or proceeding brought against purchaser so far as based on a claim that said products constitute an infringement of any patent of the United States, if notified promptly in writing and given authority, information and assistance at Trine's expense for the defense of the same. In the event of a final award of costs and damages, Trine shall pay such award. In the event the use of said products by purchaser is enjoined in such a suit, Trine shall, at its own expense, either (a) procure for purchaser the right to continue using said products, (b) modify said equipment to render them non-infringing, (c) replace said products with non-infringing products, or (d) refund the purchase price (less depreciation) and the transportation and installation costs of said products. Trine will not be responsible for any compromise or settlement made without its written consent. The foregoing states the entire liability of Trine for patent infringement, and in no event shall Trine be liable if the infringement charge is based on the use of Trine products for a purpose other than that for which sold by Trine, any alteration to the Trine products or the use of the Trine products with any other product or service not manufactured by Trine. As to any products furnished by Trine to purchaser and manufactured in accordance with designs proposed by purchaser, purchaser shall indemnify Trine against any award made against Trine for patent, trademark, or copyright infringement. 11. PATTERNS AND TOOLS. Notice will be given if special patterns or tools are required to complete any order. Charges for such patterns or tools do not convey title thereto or the right to remove them from Trine's plant. If patterns or tools are not used for a period of two years, Trine shall have the right to scrap them without notice. 12. FORCE MAJEURE. Trine shall not be liable in damages or otherwise for delays in shipment or default in delivery for any reason of force majeure or for any cause beyond Trine's reasonable control including, but not limited to (a) an act of nature; (b) government action, war, riots, civil commotion, embargoes or martial laws, (c) Trine's inability to obtain necessary materials from its usual sources of supply, (d) shortage of labor, raw material, production or transportation facilities or other delays in transit, (e) other contingencies of manufacture or shipment. In the event of any delay in Trine's performance due in whole or in part to any cause beyond Trine's reasonable control, Trine shall have such additional time for performance as may be reasonably necessary under the circumstances. Acceptance by purchaser of any goods shall constitute a waiver by purchaser of any claim for damages on account of any delay in delivery of such goods.

1440 Ferris Place Bronx, NY 10461 P: 718.829.2332 F:718.829.6405 www.trineonline.com