NO. S 70-1 "ISHII" PORTABLE PRO ACE CLINKER CUTTER NO. AWE-630XA The machine comes with JW aluminum curved handle, thick base sponges, long aluminum sliding extension side arm, 200mm protractor gauge and 22X titanium coated bearing cutting wheel. AWE-630XA rotary bearing wheel 070-01-AWE630XA 630 5 ~ 16 1 4 26 NO. S 70-2 "ISHII" DELUXE BIG CLINKER CUTTER NO. JP-640W / JP-710 JP-640W (To replace old model JP-630S / JP-680N) JP-710 This model comes with JP aluminum curved handle, spring base system and 22X titanium coated bearing cutting wheel. 070-02-JP640 640 3 ~ 18 1 2 21.9 070-02-JP710 710 3 ~ 18 1 2 24 NO. S 70-2 "ISHII" SUPER CLINKER CUTTER NO. PRO-620TX1 New PRO-620TX1 blue in colour, comes with aluminum die casting base, 8mm thickness base pads, special hard steel solid rails, 200mm aluminum protractor, 280mm long side extension arm and 22X titanium coated bearing cutting wheel. PRO-620TX1 070-02-PRO620TX1 620 5 ~ 16 1 2 19 NO. S 70-3 "ISHII" CLINKER CUTTER NO. JW-480XE This model comes with modified base, JW ACE aluminum curved handle, long pipe rails and 22X titanium coated bearing cutting wheel. JW-480XE (To replace old model JW-460X) 070-03-JW480 480 3 ~ 16 1 3 19 NO. S 70-4 "ISHII" CLINKER CUTTER NO. JP-470S This model comes with 140mm long two padded spring base plates, big cushion wheel storage grip and 22X titanium coated bearing cutting wheel. JP-470S (To replace old model JP-470) 070-04-JP470 470 3 ~ 16 1 4 32 157
NO. S 70-5 "ISHII" TILE CUTTER NO. EA-350 Economic type tile cutter with aluminum handle and solid rails without bearing. EA-350 (To replace old model M-5000S) c/w No. 622TC TiN coated wheel, blue painted body 070-05-EA350 350 4 ~ 12 1 6 26 NO. S 70-7 "ISHII" BIG JET TURBO TILE CUTTER NO. JH-650S / JH-720S Comes with an improved handle and breaking system. 120mm wide zinc alloy breaker foot, 22X titanium coated bearing cutting wheel and big cushion grip with wheel storage. JH-650S (To replace old model JT-660) JH-720S (To replace old model JT-730) carbide rotary bearing wheel, red painted body 070-07-JH650 650 6 ~ 18 1 2 24.5 070-07-JH720 720 6 ~ 18 1 2 25.5 NO. S 70-8 "ISHII" PREMIUM JET TURBO TILE CUTTER NO. AH-870S / AH-1040S / AH-1240S Comes with aluminium extruded base, spring base system and arms. Improved handle and breaking system. 120mm wide zinc alloy breaking foot, 22X titanium coated bearing cutting wheel and a big cushion grip with wheel storage. AH-870S (To replace old model AT-880) AH-1040S (To replace old model AT-1050) AH-1240S (To replace old model AT-1250) carbide rotary bearing wheel 070-08-AH0870 870 6 ~ 18 1 2 30.5 070-08-AH1040 1040 6 ~ 18 1 2 35 070-08-AH1240 1240 6 ~ 18 1 2 38 NO. S 70-9 "ISHII" PRO SLIM FLAT RAIL TILE CUTTER NO. SF-810XA With new heavy duty steel made base and thick base sponges, flat shaped steel chrome plated rail (1000x50x9mm), straight long steel handle with high tech improved bearing sliding system and 22X titanium coated bearing cutting wheel. SF-810XA carbide rotary bearing wheel 070-09-SF810XA 810 2 ~ 20 1 2 22.5 NO. S 70-10 "ISHII" PRO SLIM JET TURBO TILE CUTTER NO. SH-840XA With new heavy duty steel made base and thick base sponges, 300mm wide protractor gauge, long aluminum extension side arms and 22X titanium coated bearing cutting wheel. SH-840XA carbide rotary bearing wheel 070-10-SH840XA 810 2 ~ 18 1 2 22 158
NO. S 70-14 ISHII PRO GT ELECTRIC TILE CUTTING MACHINE NO. GT-510 / GT-710 / GT-1020 Portable and reliable tile cutter. Can adjust to 45. Comes with 125mm wet and turbo diamond blade for faster cutting. (Wet cutting is recommended) Item No. Cutting Max Cutting Dimension(mm) Wt Price Lgth(mm) Thickness(mm) L x W x H (kg) (set) 070-14-GT0510 510 20 83x49x46 cm 19.5 070-14-GT0710 710 20 103x49x46 cm 24 070-14-GT1020 1020 20 134x49x46 cm 29.5 GT-510 GT-710 GT-1020 Tile Cutting Machine Specification Model No. GT-510 GT-710 GT-1020 Cutting Length : 510 mm 710 mm 1020 mm Cutting Thickness : 20 mm 20 mm 20 mm Cutting Thickness at 45 : 13 mm 13 mm 13 mm Overall Length : 800 mm 1020 mm 1320 mm Width : 460 mm 460 mm 460 mm Height : 430 mm 430 mm 430 mm Net Weight : 18.0 kgs 22 kgs 27 kgs Gross Weight : 19.5 kgs 24 kgs 29.5 kgs Blade Specification Blade : 125mm x 1.4mm x 22mm Blade Type : Continuous Rim Voltage : 220V / 50Hz, 115V / 60Hz Speed : 11,000 rpm/min, 9,000 rpm/min Power : 840W NO. S 70-14 "ISHII" COMPACT WET TILE CUTTING MACHINE NO. JS-410A Complete with wet diamond cutting wheel of diameter 180mm x 1.8mm thickness x 22mm hole. Item No. Cutting Max Cutting Dimension(mm) Wt Price Lgth(mm) Thickness(mm) L x W x H (kg) (set) 070-14-JS410A 410 30 420x410x300 13 JS-410A NO. S 70-19 "ISHII" BLOCK CUTTING MACHINE NO. IZ-33 Can cut all kinds of bricks. Special hard steel blade with 4 different changeable edge. Cutting Cutting Dimension Item No. Length Thickness Pressure L x W x H Wt Price (mm) (mm) (ton) (mm) (kg) (set) 070-19-IZ33 330 10-120 10 930x280x580 40 070-19-IZ33B Blade for IZ-33 Cutting Machine (2-pc set) IZ-33 158A
NO. S 70-20 "ISHII" TILE CUTTER SPARE WHEEL "ISHII" tile cutting wheels are made of Toshiba Tungaloy tungsten carbide to ensure sharp cutting and long durability. No. 215 Tungsten Carbide Rotary Bearing Wheel O.D. : 21.5mm No. 622TC Titanium Coated Wheel Without Bearing O.D. : 21.5mm No. 22X Titanium Coated Tungsten Carbide Rotary Bearing Wheel O.D. : 22mm Screw for No. 215 Wheel Item No. For Model Packing Price (pcs/box) (pc) Spare Wheel for Tile Cutter 070-20-215 K-1040DX, K-1041DX 12 070-20-22X AH-870S, AH-1040S, AH-1240S, 12 AWE-630A, JH-470S, JH-650S, JH-720S, JP-450X, JP-470S, JP-630S, JP-640W, JP-710, JW-460X, K-1040JPS SF-810XA, SH-840XA 070-20-622TC EA-350, K-1039TS, M-5000SA 12 Miscelleaneous 070-20X-215SN Screw for No. 215 wheel 070-20X-22XSN Screw with nut & washer for No. 22X wheel 070-20X-22XWH Wheel holder for No. 22X wheel (JP Series) 070-20X-22XWH01 Wheel holder for No. 22X wheel (AH / JH Series) Wheel holder for AH / JH Tile Cutter No. 22X wheel Wheel holder for JP Tile Cutter No. 22X wheel 159
NO. S 70-21~23 "ISHII" TILE CUTTER SPARE PARTS Laser guide On / Off Switch Parallel Adjusting Screw Vertical Adjusting Screw Scale & guide handle press bearing rubber stopper end post ball bearing assembly pipe rail scale guide s crew Breaker foot Height adjustment screw & wing nut rubber mat scale w/ protractor press holder bolt breaker foot cutting wheel stainless steel center holder clamp lever Scale guide screw Clamp lever Item No. Spare Parts for Tile Cutter Colour Length Price S 70-21 Scale & Guide (Gauge) ** G2 Gauge - Blue (old colour) ** G3 Gauge - Gold (old colour) ** BF04 Breaker Foot - Orange (old colour) 160 Of Parts Of Parts (pc) 070-21-G3 For AWE-630XA, JP-470S, JP-640W, JP-710, JW-460X, PRO-620TX1 Grey 200mm (Old Mdl JP-450X, K-1040JPS, K-1041DX) Tile Cutter 070-21-G4 For JH-650S, JH-720S, SF-810XA, SH-840XA (Old Mdl JT-660, JT-730) Tile Cutter Red 300mm 070-21-G5 For AH-870S, AH-1040S, AH-1240S (Old Mdl AT-880, AT-1050, AT-1250) White 200mm Tile Cutter (** originally come with 500mm guide but can also use 200mm guide ) 070-21-G5L For AH-870S, AH-1040S, AH-1240S (Old Mdl AT-880N, AT-1050N, AT-1250N) Chrome 500mm Tile Cutter S 70-22 Breaker Foot (Moving Fulcrum) 070-22-BF03 For JP-470S, JP-640W, JP-710, SF-810XA, SH-840XA Blue 90mm (Old Mdl JP-470, JP-470PE, JP-680) Tile Cutter - same as BF5 but in different colour 070-22-BF03A For AH & JH Series, JP-630S (Old Mdl JP-680N) Tile Cutter, Red 120mm can also fit on JP-470 070-22-BF04 For AT & JT-660, JT-730 Series Tile Cutter Grey 120mm 070-22-BF05 For JP-450X, SF-810XA, SH-840XA (Old Mdl K-1040DX, K-1040JPS & K-1041DX) Brown 90mm Tile Cutter - same as BF3 but in different colour 070-22-BF05B For AWE-630XA, JW-460X (Old Mdl K-1040JW) Tile Cutter Brown 90mm 070-22-BF07 For AP Series Tile Cutter (w/o rubber pad ) Blue 120mm 070-22-BF08 For AW Series Tile Cutter, can also fit on JT-660, JT-730 & AT Series Blue 120mm but w/o rubber pad S 70-23 Miscelleaneous 070-23-AN Adjustable Nut 070-23-CL Clamp Lever for Gauge 070-23-GB Gauge Bolt (for all tile cutter except new AH Series) 070-23-GBB Gauge Bolt Type B for JW460X gauge 070-23-GSB Gauge Screw with washer (Black) Black 070-23-GSO Gauge Screw with washer (Orange) Orange 070-23-HAS Cutting Height Adjustment Screw 070-23-LCZN Laser Guide L-CZN for JH / AH, JP / JW / MX tile cutter (w/o battery) 070-23-PR Pipe Rail (hollow) for K-1040DX 070-23-RP Rubber Pad for AT / JT tile cutter 15.70 17.30 36.30 12.20 12.20 12.20 0.85 4.00 4.60 4.60 1.10 1.10 6.60 26.50 1.60 / 16.50 / 18.20 / 38.20 / 12.80 / 12.80 / 12.80 / 0.90 / 4.20 / 5.10 / 5.10 / 1.15 / 1.15 / 7.00 / 29.20 14.00 / 14.70 per pair / 1.70
NO. S 71-3 "ISHII" SIDE NIPPER NO. N-1054 (550A) N-1054 Tungsten carbide-tipped side nipper. The cutting angle is designed to maintain perfect 90 degrees vertical to the surface of tile. Item No. Length Packing (pcs) Price (mm) Box / Ctn (pc) 071-03-N1054 200 6 60 NO. S 71-4 "ISHII" GT NIPPER NO. N-1057 Extra-superior quality drop-forged nipper with tungsten carbide tip. N-1057 Item No. Length Packing (pcs) Price (mm) Box / Ctn (pc) 071-04-N1057 210 6 60 NO. S 71-5 "ISHII" TILE NIPPER NO. N-1060 Newly designed tungsten carbide-tipped tile nipper. N-1060 Item No. Length Packing (pcs) Price (mm) Box / Ctn (pc) 071-05-N1060 205 6 60 NO. S 71-7 "ISHII" TILE GROUT SAW GS-PRO ABS hard plastic and soft grip handle with ideal shape. 50mm straight carbide grit-edge blade. Easily stripes, clean and removes old grout for floor and wall tiles. One extra blade in handle storage compartment. GS-PRO Item No. Length Blade Lgth Packing (pcs) Price (mm) (mm) Box / Ctn (pc) 071-07-GS 210 50 6 180 071-07-GSB Blade for Grout Saw GS-PRO Harden flexible steel plate w/comfortable soft rubber tube covered steel neck shaft Light weight & comfortable contoured wooden handle NO. S 71-9 "ISHII" RUBBER POINTED TROWEL O-3004 Pointed front for grouting internal wall or floor corners. Item No. Length Packing Price (mm) (pcs/box) (pc) 071-09-3004 210 6 O-3004 Durable rubber base with thin covers for tough wet use 161