Validation of a FAST Model of the Statoil- Hywind Demo Floating Wind Turbine

Similar documents
DeepWind-from idea to 5 MW concept

Hywind Scotland status and plans

Real-time hybrid testing of a braceless semisubmersible

Development of a 12MW Floating Offshore Wind Turbine

Session 5 Wind Turbine Scaling and Control W. E. Leithead

1 st DeepWind 5 MW baseline design

ATLAS Principle to Product

Gearbox Fault Detection

Optimum combined pitch and trailing edge flap control

Control of Wind Turbines: A data-driven approach

The X-Rotor Offshore Wind Turbine Concept

Aero-Elastic Optimization of a 10 MW Wind Turbine

Floating Foundations: Opening Up Deeper Waters In the U.S.

EP4-Platform: E-126 EP4 / E-141 EP4. Arno Hildebrand, Programm Manager EP4 ENERCON Research & Development

EMS ELONGATION MEASUREMENT SYSTEM. Strain measurement system for wind turbines optimizing the control & condition monitoring

Within the 300 GW total, the Energy Department estimates that 54 GW will be required from offshore wind to feed the large coastal demand centers.

Multi Rotor Solution for Large Scale Offshore Wind Power

Rotor imbalance cancellation

Development of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems

Development of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics.

Hva er utsiktene for flytende vindturbiner til havs? Klimafrokost, Bergen 15/ Simen Moxnes, Statoil. Statoil ASA

Siemens Cold Climate Strategy

The Effects of Damage and Uncertainty on the Aeroelastic / Aeroservoelastic Behavior and Safety of Composite Aircraft

TetraSpar. Industrialized Floating Foundation

Effects of Large Bending Deflections on Blade Flutter Limits. UpWind Deliverable D2.3. Bjarne Skovmose Kallesøe Morten Hartvig Hansen.

Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA)

T701 (240 VAC, 1-phase, 60 Hz)

Ingenuity for Life Wind Power Morten Pilgaard Rasmussen. Restricted Siemens AG 2016

Wind Turbine Generator System. General Specification for HQ2000

Shock tube based dynamic calibration of pressure sensors

Transmitted by the expert from Germany

LA10 (480 VAC, 3-phase, 60 Hz)

Y. Lemmens, T. Benoit, J. de Boer, T. Olbrechts LMS, A Siemens Business. Real-time Mechanism and System Simulation To Support Flight Simulators

Flight Test Evaluation of C-130H Aircraft Performance with NP2000 Propellers

CHAPTER 4 : RESISTANCE TO PROGRESS OF A VEHICLE - MEASUREMENT METHOD ON THE ROAD - SIMULATION ON A CHASSIS DYNAMOMETER

Aeroelastic Load Simulations and Aerodynamic and Structural Modeling Effects

Multi-axial fatigue life assessment of high speed car body based on PDMR method

Reliable and Application specific. Slewing Drives for Wind Turbines

Design and Calculation of Fast-Running Shunting Locomotives

Dynamic Behavior Analysis of Hydraulic Power Steering Systems

How Multibody-System Simulation Models can Support the Design of Wind Turbines

Alfonso PORCEL, Olivier MACCHI - PSA Peugeot Citroen, France

Drivetrain Simulation and Load Determination using SIMPACK

SWCC Summary Report. Eveready Diversified Products (Pty) Ltd T/A Kestrel Renewable Energy. Certification Number: SWCC (240 VAC, 1-phase, 60 Hz)

Approach for determining WLTPbased targets for the EU CO 2 Regulation for Light Duty Vehicles

INTERNATIONAL STANDARD

The Effects of Damage and Uncertainty on the Aeroelastic / Aeroservoelastic Behavior and Safety of Composite Aircraft. JAMS Meeting, May

The Role of Structural/Foundation Damping in Offshore Wind Turbine Dynamics

ASTM B117 Testing Quality Control

Initial Design of a 12 MW Floating Offshore Wind turbine

Vehicle functional design from PSA in-house software to AMESim standard library with increased modularity

PROTEST -Procedures for Testing and Measuring Wind Energy Systems Drive train case study

Modification of IPG Driver for Road Robustness Applications

FRONTAL OFF SET COLLISION

PV Grid Integration Research in the U.S.

Identification of tyre lateral force characteristic from handling data and functional suspension model

Setting up a prototype measurement campaign for mechanical components

ME 466 PERFORMANCE OF ROAD VEHICLES 2016 Spring Homework 3 Assigned on Due date:

Effectiveness of ECP Brakes in Reducing the Risks Associated with HHFT Trains

Standard Uncertainty in AEP (kwh)

APPENDIX J V90 3.0MW Turbine Specifications

Virtual Testing for Automotive Components and its Integration into the OEM s Product Creation Process. Dr. Gerald Seider Dr.

Estimation of Unmeasured DOF s on a Scaled Model of a Blade Structure

AXLE HOUSING AND UNITIZE BEARING PACK SET MODAL CHARACTERISATION

Tension and Compression Load Cell Model 8435

Mathematical Modelling and Simulation Of Semi- Active Suspension System For An 8 8 Armoured Wheeled Vehicle With 11 DOF

ENERCON GmbH ENERCON E-66. page 1 of 6. Design. Dreekamp 5 Tel.: / Aurich Fax: / Design

V MW An efficient way to more power

MODELING SUSPENSION DAMPER MODULES USING LS-DYNA

Load Reduction of Floating Wind Turbines using Tuned Mass Dampers

A numerical DP module For design and operations

(2014) 2014), 1-6. ISBN

PRECISION BELLOWS COUPLINGS

Embedded Torque Estimator for Diesel Engine Control Application

Theory of Machines II EngM323 Laboratory User's manual Version I

Wind Blade Failure Identification and Prevention

SeaGen-S 2MW. Proven and commercially viable tidal energy generation

Load Cell for Manually Operated Presses Model 8451

Exploit of Shipping Auxiliary Swing Test Platform Jia WANG 1, a, Dao-hua LU 1 and Song-lian XIE 1

OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018

Modeling of 17-DOF Tractor Semi- Trailer Vehicle

Design and Calibration of the Jaguar XK Adaptive Cruise Control System. Tim Jagger MathWorks International Automotive Conference 2006

BLADEcontrol Greater output less risk

What is model validation? Overview about DynoTRAIN WP5. O. Polach Final Meeting Frankfurt am Main, September 27, 2013

Vehicle Turn Simulation Using FE Tire model

Designing for Reliability and Robustness with MATLAB

Helicopter Noise and Vibration (EU Project "HELINOVI")

S&C: Understanding Root Causes & Assessing Effective Remedies C4R Final Dissemination Event, Paris 15 th March 2017

EFFECT OF SURFACE ROUGHNESS ON PERFORMANCE OF WIND TURBINE

Renewable Energy Systems

V MW & 2.0 MW Built on experience

SHORT PAPER PCB OBLIQUE COLLISIONS ENGINEERING EQUATIONS, INPUT DATA AND MARC 1 APPLICATIONS. Dennis F. Andrews, Franco Gamero, Rudy Limpert

SPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?

Offshore Application of the Flywheel Energy Storage. Final report

Hywind Experience from offshore operation. Classification: Internal

Verifying the accuracy of involute gear measuring machines R.C. Frazer and J. Hu Design Unit, Stephenson Building, University ofnewcastle upon Tyne,

Full Vehicle Durability Prediction Using Co-simulation Between Implicit & Explicit Finite Element Solvers

Adelaide Wind Power Project Turbine T05 (AD117) IEC Edition 3.0 Measurement Report

Thrust Area 6: Ocean Energy Buoy Array for Ocean Wave Power Generation. Executive Summary

Job Sheet 2 Aerodynamics Power Control

Transcription:

Validation of a FAST Model of the Statoil- Hywind Demo Floating Wind Turbine EERA DeepWind 2016 20-22 January, 2016 Frederick Driscoll, NREL Jason Jonkman, NREL Amy Robertson, NREL Senu Sirnivas, NREL Bjørn Skaare, Statoil Finn Gunnar Nielsen, Statoil NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

Project Overview & Objectives FAST is DOE/NREL s premier open-source wind turbine multi-physics engineering tool: Turbine capability validated for land-based applications FOWT capability verified in IEA Wind OC3 & OC4 projects FOWT capability validated against model-scale wave-tank data This presentation uses Hywind Demo field data to validate & assess accuracy of FAST under realistic full-scale open-ocean conditions EERA DeepWind 2016 2 National Renewable Energy Laboratory

EERA DeepWind 2016 3 National Renewable Energy Laboratory Project Methodology Gather Field Test Data Gather System Design Information Evaluate Datasets & Select Validation Cases Develop FAST model Calibrate & Verify Model Simulate Turbine Response Under Similar Conditions to Field Test Validate Model Against Field Data

EERA DeepWind 2016 4 National Renewable Energy Laboratory Field Data Gather Field Test Data Gather System Design Information Evaluate Datasets & Select Validation Cases Develop FAST model Calibrate & Verify Model Simulate Turbine Response Under Similar Conditions to Field Test Validate Model Against Field Data

EERA DeepWind 2016 5 National Renewable Energy Laboratory Field Data Datasets Used for Validation: Statoil provided 8 time series w/ turbine operating (nothing parked/idling), each 30-60-min long, in roughly stationary environmental conditions Case no. Duration (min) Mean wind speed (m/s) Wind direction (coming from) (deg) Significant wave height (m) Peakspectral wave period (s) Peakshape parameter (-) Wave propagation direction (deg) Mean current speed (m/s) Current direction (deg) Turbine status 1 60 4.7 151 0.88 7.0 2.2 4 0.40 138 Producing power 2 60 9.1 36 1.3 6.9 1 144 0.31 68 Producing power 3 60 9.7 15 1.4 8.6 2 146 0.32 316 Producing power 4 35 12.8 227 3.3 9.7 1.1 25 0.29 50 Producing power 5 35 13.4 252 5.2 10.3 1.74 79 0.52 89 Producing power 6 35 17.5 147 4.0 10.0 1.2 355 0.43 337 Producing power 7 35 18.3 165 2.0 6.8 2.2 353 0.38 316 Producing power 8 35 21.7 152 2.3 7.1 2 358 0.30 336 Producing power

Field Data Measurements: Metocean Turbine Tower Platform Wind speed & direction Current speed & direction profiles Wave height & direction spectral moments Generator speed LSS moments & torque Blade pitch Blade root moments Nacelle yaw Export power Accelerations @ tower top Bending moments @ stations along tower 6 DOF motion Geodetic position Data QA (in addition to previous QA by Statoil): Reviewed each measurement for continuity/gaps, noise, spikes, strange values/obvious errors, range/thresholds, etc. Spot-checked measured values against specifications/expected values Verified sample rates for consistency & against specifications Cross-compared similar measurements & performed correlation tests Several channels were rejected, but majority of data was good Measurement calibrations & uncertainties not provided (limits extent of validation possible) EERA DeepWind 2016 6 National Renewable Energy Laboratory

EERA DeepWind 2016 7 National Renewable Energy Laboratory Model Data Gather Field Test Data Gather System Design Information Evaluate Datasets & Select Validation Cases Develop FAST model Calibrate & Verify Model Simulate Turbine Response Under Similar Conditions to Field Test Validate Model Against Field Data

Model Data Simplifications/Differences FAST model built by data provided by Siemens & Statoil Rotor Diameter = 82.4 m 220 m 65 m 110 100 m 17 m 8.3 m Blades simplified as straight beams Moorings simplified as uniform catenaries w/ equivalent mass/stiffness Linear yaw stiffness used to approximate restoring of mooring delta Approximate offshore controller mimics 2-layer Siemens-Statoil controller deployed in field No nacelle-yaw control Wind time series accurate @ hub-height; other points in field derived (TurbSim) Unidirectional wave time series developed from limited wave statistics EERA DeepWind 2016 8 National Renewable Energy Laboratory

EERA DeepWind 2016 9 National Renewable Energy Laboratory Calibration & Verification Gather Field Test Data Gather System Design Information Evaluate Datasets & Select Validation Cases Develop FAST model Calibrate & Verify Model Simulate Turbine Response Under Similar Conditions to Field Test Validate Model Against Field Data

EERA DeepWind 2016 10 National Renewable Energy Laboratory Calibration Methodology Parameter Change Rationale Blade mass Scaled to match total mass Simplified beam model Tower mass Scaled to match total mass Simplified beam model Mooring Scaled to match surge/sway Simplified mooring mass/length natural frequencies model & provided mooring details were Yaw spring Spar vertical CG Selected to match yaw natural frequency Shifted to match pith/roll natural frequencies approximate Simplified mooring model & provided mooring details were approximate CG not provided

EERA DeepWind 2016 11 National Renewable Energy Laboratory Calibration Results Masses & Inertias (Normalized) Parameter Specified Simulated Blade Mass 1 1 Blade CoG 1 1.007 Second Mass Moment 1 0.9954 Tower-top Mass 1 1.0002 Tower Mass 1 0.993 Blade & Tower Frequencies (Normalized, Fixed/Nonspinning) Parameter Specified Simulated Flap Blade Mode 1 1 1.008 Flap Blade Mode 2 1 1.03 Edge Blade Mode 1 1 1.006 Tower Mode 1 1 0.91 Tower Mode 2 1 0.99 Spar Natural Periods (with Nonoperating Turbine) Parameter Measured (s) Simulated (s) Surge 125.0 120.0 Sway 125.0 119.5 Heave 27.5 27.8 Roll 23.9 25.6 Pitch 23.9 25.1 Yaw 6.2 7.36

Verification Power Curve & Rotor Speed Excellent agreement between fixed & floating model Good agreement between Siemens simulated land-based power curve Power Rotor Speed Simulated - FAST Fixed Simulated - FAST Floating Simulated - Siemens Wind Speed Fixed FAST model uses Siemens land-based controller Floating FAST model uses approximate offshore controller EERA DeepWind 2016 12 National Renewable Energy Laboratory

EERA DeepWind 2016 13 National Renewable Energy Laboratory Validation Gather Field Test Data Gather System Design Information Evaluate Datasets & Select Validation Cases Develop FAST model Calibrate & Verify Model Simulate Turbine Response Under Similar Conditions to Field Test Validate Model Against Field Data

Validation Control Excellent agreement between measured & simulated blade pitch: In response to rapid changes to wind speed @ different mean wind speeds Even though wave time series differ The use of TurbSim to reproduce measured wind time series @ hub height & statistically equivalent wind field allowed comparison of time series Being able to do same for waves would be useful Measured Simulated Avg Wind Speed 21.7 m/s Blade Pitch Bld Pitch Avg Wind Speed 17.5 m/s Avg Wind Speed 13.4 m/s Wind Speed 5-Min Averages EERA DeepWind 2016 14 National Renewable Energy Laboratory Time

Validation Drivetrain Excellent agreement in power & torque above rated Model slightly over-predicts power & torque below rated, expected because: Simplifications in blade model Use of approximate controller Use of nacelle-based wind measurements Power LSS Torque Measured Simulated Wind Speed No scale factors were provided to convert measured strain to torque; a scale factor & offset (to remove signal bias) were chosen to fit measured torque with simulated values EERA DeepWind 2016 15 National Renewable Energy Laboratory

Validation Blade Loads Mean flap moments agree well Mean edge moments agree up until rated power, but diverge when blade is pitched: Var Edge Mom Var Flap Mom Flap moment >> edge moment & difference may be due to slight misalignment of strain gauges from principle edge & flap axes Wind Speed Measured Simulated No scaling factors were provided; a scale factor & offset were chosen to fit measured & simulated 5-min average variance & mean Only a comparison of general response can be made, not a direct comparisons of signal magnitude EERA DeepWind 2016 16 National Renewable Energy Laboratory Edge Mom Flap Mom Wind Speed Measured Simulated

Validation Platform Response @ H s = 4 m, T p = 10 s Surge [m 2 /Hz] 10 0 Measured Simulated 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 Roll [deg 2 /Hz] 10 0 Measured Simulated 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 Sway [m 2 /Hz] 10 0 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 Pitch [deg 2 /Hz] 10 0 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 Heave [m 2 /Hz] 10 0 10-2 10-4 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 Freq [Hz] Good agreement in surge, sway, heave, roll & pitch over all frequencies within wave-band More variation outside wave-band & in yaw response, likely caused by: Mooring simplification Spread seas Different wind variation across disk 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 EERA DeepWind 2016 17 National Renewable Energy Laboratory Yaw [deg 2 /Hz] Roll [deg 2 /Hz] Pitch [deg 2 /Hz] 10 0 10 0 10-2 10 0 10-2 Freq [Hz] Measured Simulated 0 0.01 0.02 0.03 0.04 0.05 0.06 0 0.01 0.02 0.03 0.04 0.05 0.06

Conclusions & Outlook Good agreement found between measured & simulated responses Validation presents solid first step in checking FAST accuracy to model coupled FOWT response under realistic open-ocean conditions Next steps could involve: Improvement of blade (BeamDyn) & mooring models (MoorDyn) Measured wave time series Measurement uncertainty quantification & model sensitivity analysis Analysis of additional cases, including parked/idling under extreme conditions EERA DeepWind 2016 18 National Renewable Energy Laboratory

Carpe Ventum! Jason Jonkman, Ph.D. +1 (303) 384 7026 jason.jonkman@nrel.gov NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.