General Price List Main effective MAY 13, General Price List. Main

Similar documents
Fire Protection Price List

Fire Protection Price List. Piping. Systems. Solutions A FP.

Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)

REQUEST PUBLICATION 18.11

24.01 Pipe Preparation Tool Specifications

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

08.08 Vic-Check Valves

Style 99 Roust-A-Bout Couplings

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

I-100 FIELD INSTALLATION HANDBOOK. For IPS and Metric Carbon Steel, Stainless Steel, and Aluminum Products

Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS

SEE VICTAULIC PUBLICATION FOR DETAILS

Series 709 Butterfly Valves (175 psi/1270 kpa)

Revit Complete Lookup Tables -.CSV s & TXT s Revised date: AGS Aluminum AWWA

Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Style Flange Adapter

Series W709 AGS Butterfly Valves (175 psi/1270 kpa)

Series 706 Butterfly Valves (300 PSI/2065 kpa)

STAINLESS STEEL SYSTEMS

FIG Gruvlok Flange Adapter

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa)

Victaulic Specification Power Industry

Size Inches UL ULC FM. Pipe Sch.

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications

The applicable material specifications for ductile iron and rubber gaskets apply:

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications

I-300 FIELD INSTALLATION HANDBOOK. AWWA Products GASKET INFORMATION PIPE PREPARATION PRODUCT INSTALLATION PRODUCT DATA

EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly

Pressfit System for Carbon Steel Pipe

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings

GRUVLOK FITTINGS FOR GROOVED-END PIPE

INTRODUCTION. General Notes

Mechanical Piping Products

B U I L D I N G C O N N E C T I O N S T H AT L A S T

Victaulic General Catalog. General Catalog g-103. g-103. Updated 6/2009

GROOVED FITTINGS FOR COPPER TUBING

Series 758 FireLock Actuated System Valve

FIG Gruvlok Flanges

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Series 756 FireLock Dry System Check Valve

From the world s leader in mechanical piping systems... The complete system for stainless steel piping.

Return not FoR ReSale Next Page

Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap

Lenntech Tel Fax

FireLock NXT Deluge Valve. With Deluge Trim Grooved x Grooved. System No. Submitted By Spec Sect Para Location Date Approved Date

Series 769 FireLock NXT Deluge Valve

Typical Specifications Grooved Piping Method

Model 7706 Reducing Coupling. Deg. Axial Displacement

08.20 VIC -300 MasterSeal Butterfly Valves

CAST IRON FITTINGS STANDARD

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

Ford Service Saddles and Tapping Sleeves

Advantages of Grooved Fittings

VICTAULIC Shouldered Solutions

Mechanical Piping.

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

11.02 Mechanical-T Bolted Branch Outlets

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle

30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim

Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.

UNITED BRAND FITTINGS

SECTIO N 15 Phone: (866) Fax: (888)

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services

Ford Service Saddles and Tapping Sleeves

SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY

GENERAL-SERVICE COMPRESSED-AIR PIPING SECTION GENERAL-SERVICE COMPRESSED-AIR PIPING PART 1 - GENERAL

TRUSTED FOR 150 YEARS

THE FIBERBOND FITTINGS GUIDE

Series 751 FireLock European Alarm Check Valve Stations

MARINE INDUSTRY PRODUCT CATALOG. G-108 updated 1/2015

UNITED BRAND FITTINGS

Section 8 AMERICAN. Flanged Pipe

UNITED BRAND FITTINGS

FIRE PROTECTION PRODUCTS

FILTERS, STRAINERS AND VALVES PRODUCT GUIDE

B NPT. Dimensions Inches/millimeters

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts

LATEST ARRIVALS CATALOGUE STOCK

NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.

Vic -300 Butterfly Valves

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in.

SERIES 20HV FITTINGS GUIDE

We Are the Worldwide Provider for All Your Valve and Fitting Needs

Certa-Lok YelomineTM

Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW

VICTAULIC INSTALLATION-READY TECHNOLOGY UP TO 10 TIMES FASTER TO INSTALL THAN OTHER JOINING METHODS. Patented

We Are the Worldwide Provider for All Your Valve and Fitting Needs

Ford Fabricated Steel Products

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.

Transcription:

General Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully searchable product and project databases Free product submittals Free product literature Piping software demos and modules Information on new product innovations Support services, and more... VICTAULIC UNITED STATES CENTRAL AND SOUTH AMERICA P.O. Box 31 Easton, PA 18044-0031 USA P.O. Box 31 Easton, PA 18044-0031 P.O. Box 31 Easton, PA 18044-0031 USA 4901 Kesslersville Road Easton, PA 18040 USA 4901 Kesslersville Road Easton, PA 18040 USA 4901 Kesslersville Road Easton, PA 18040 USA 1 800 PICK VIC 1 800 742 5842 1 610 559 3300 1 610 250 8817 (fax) pickvic@victaulic.com 1 610 559 3300 1 610 250 8817 (fax) pickvic@victaulic.com 1 610 559 3300 1 610 559 3608 (fax) vical@victaulic.com Updated 5/2013 1616 rev Y Victaulic is a registered trademark of Victaulic Company. 2013 Victaulic Company. All rights reserved. General Price List 2013 Main WORLD HEADQUARTERS 2013-Main effective MAY 13, 2013

Index Style 107H QuickVic Rigid Coupling for Steel Style 07 Zero-Flex Rigid Coupling Style W07 AGS Rigid Coupling Style 177 QuickVic Flexible Coupling for Steel Style 77 Standard Coupling Style W77 AGS Flexible Coupling Style 75 Flexible Coupling Style 750 Reducing Coupling Style 741 Vic-Flange Adapter Style W741 AGS Vic-Flange Adapter Style 743 Vic-Flange Adapter Style 72 Outlet Coupling SECTION 1 Couplings and Fittings Styles 791 and 792 Vic-Boltless Coupling Style 78 Snap-Joint Coupling Style HP-70 Rigid Coupling Style HP-70ES High Pressure EndSeal Coupling Style 307 AWWA to IPS Transition Coupling Style 171 Composite Flexible Coupling IPS Grooved End Fittings AGS (Advanced Groove System) Grooved End Fittings Extra Heavy ES EndSeal Fittings Style 47 Clearflow Dielectic Waterway Carbon Steel (IPS) to Copper (CTS) Transition Fitting Style 47-GG Carbon Steel (IPS) to Copper (CTS) Transition Fitting SECTION 2 Hole Cut Products Style 920/920N Mechanical-T Outlet Vic -Tap II Hot Tap Style 920/920N Mechanical-T Cross Style 923 Vic-Let Strapless Outlet Style 924 Vic-O-Well Thermometer Outlet SECTION 3 Valves and Specialties Series 761 Vic-300 MasterSeal Butterfly Valve Series W761 Vic-300 (300 psi) AGS Butterfly Valve Series 706 (300 psi) Large Diameter High Pressure Butterfly Valve Series 700 Butterfly Valve Series 721 Grooved End Ball Valve Series 726 Vic-Ball Valve Series 722 Threaded Ball Valve Series 712 Swinger Check Valve Series 713 High Pressure Swinger Check Valve Series 716H/716 Vic-Check Valve Series 779 Venturi Check Valve Series W715 AGS Check Valve Series 377 Balancing Plug Valve Series 318 Sump Ejector Kit Series 731-D Suction Diffuser Series W731-D AGS Suction Diffuser Series 730 Vic-Strainer Tee Type Strainer Series W730 AGS Vic-Strainer Tee Type Series 732 Vic-Strainer Wye Type Strainer Series W732 AGS Wye-Type Strainer Style 150 Mover Expansion Joint SECTION 4 Hydronic Balancing Products TA Series 786 Manual Balancing Valve STAS Solder End TA Series 787 Manual Balancing Valve STAD NPT (Fem.) End Series 78K Manual Balancing Valve STADK Balancing Valve TA Series 788 Manual Balancing Valve STAF Flanged End TA Series 789 Manual Balancing Valve STAG Grooved End Insulation and Drain Kits Spare Parts Series 76T Automatic Balancing Valve Fem x Fem Threaded Series 76B Automatic Balancing Valve Fem x Fem Threaded with Ball Valve Kit Series 76K Automatic Balancing Valve Male x Fem Threaded Series 76V Automatic Balancing Valve Male x Fem Threaded with Ball Valve Kit Automatic Balancing Valve Accessories Automatic Balancing Valve Cartridges TA Series 793 Differential Pressure Controller TA Series 794 Differential Pressure Controller Differential Pressure Controller Accessories Series 799/79V/79A/79B KOIL-KIT Coil Pack TA Series 736 TA Link Differential Pressure Sensor Index 1

Index Index Universal Gauge Meter Conversion Kit TA Series 73M TA CMI TA Series 734 Scope Balancing Instrument SECTION 5 Plain End Products Style 99 Roust-A-Bout Coupling Adapter Nipples Plain End Fittings SECTION 6 Vic-Press System for Schedule 10S Stainless Steel Pipe Vic-Press Press System for Schedule 10S, Type 304 Stainless Steel Piping Vic-Press Press System for Schedule 10S, Type 316 Stainless Steel Piping SECTION 7 HDPE Products Style 995 HDPE Coupling Style 994 HDPE Flange Adapter Style 997 HDPE-to-Steel Transition Coupling SECTION 8 Copper Connection Style 607 QuickVic Rigid Coupling for Copper Style 622 Copper Mechanical-T Bolted Branch Outlet Style 622 Copper Mechanical-T Cross Style 641 Copper Flange Adapter Grooved End Copper Fittings Series 608 Copper Butterfly Valve SECTION 9 Aluminum Products Style 77A Flexible Coupling for Aluminum Pipe Style 78A Snap-Joint Coupling for Aluminum Pipe Grooved End Aluminum Fittings SECTION 10 Stainless Steel Products Style 89 Ductile Iron Coupling for Stainless Steel Pipe Style W89 AGS Rigid Coupling Style 489 Rigid Stainless Steel Coupling CF8M Style 489DX Rigid Stainless Steel Coupling CE8MN Style 475 Flexible Stainless Steel Coupling CF8M Style 475DX Flexible Stainless Steel Coupling CE8MN Style 77DX Flexible Stainless Steel Coupling CE8MN Style 77S Flexible Stainless Steel Coupling Style 441 Stainless Steel Vic-Flange Adapter No. 45S Stainless Steel Flange Adapter (Van Stone Type) Standard Schedule 10S Type 304L and Type 316L Stainless Steel Fittings Standard Schedule 40S Type 304L and Type 316L Stainless Steel Fittings Series 763 Stainless Steel Butterfly Valve Series 726S Stainless Steel Grooved End Ball Valve Series 712S Stainless Steel Check Valve SECTION 11 Large Diameter AGS Vic-Ring Systems Style W07 AGS Rigid Coupling for AGS Vic-Ring System Style W77 AGS Flexible Coupling for AGS Vic-Ring System SECTION 12 Pipe Preparation Tools VE12 Groove-In-Place VE26 S/C/SS/P Groove-In-Place VE26/VE46 Power Drive Kit VE46/P Groove-In-Place VE226 B/S/M/C/BSS/MSS/P Portable Groover VE226 Power Drive Kit VE106 Groove-N-Go VE272SFS Field Roll Grooving Tool VE270FSD Field Roll Grooving Tool VE416FSD/417FSD Field Roll Grooving Tool VE416FS Field Roll Grooving Tool VE450FSD Field/Shop Roll Grooving Tool VE268 Shop Fabrication Grooving Tool VE414MC Shop Fabrication Grooving Tool VE460 Shop Fabrication Grooving Tool VPD752 Victaulic Power Drive VAPS 112 Pipe Stand VAPS 224 Pipe Stand VAPS 1672 Pipe Stand VE436MC Quick Change Slide Conversion Kit VG28GD Gear Drive Cut Grooving Tool VG824 Cut Grooving Tool VG412 Orbital Grooving Tool VG Cut Grooving Tool Power Mule External Power Source PT-100 Go/No-Go Grooved Pipe Diameter Tape 2

Index PT-102 AGS Go/No-Go Grooved Pipe Diameter Tape Tool Carry Bag VPG26 Cut Grooving Tool for Plastic Pipe VPG824 Cut Grooving Tool for Plastic Pipe VHCT 900 Hole Cutting Tool HCT908 Hole Cutting Tool Vic-Tap II Hot Tap PFT510 Vic-Press Tool for Schedule 10S Stainless Steel Pipe VCT1 Cut Off Tool - Manual VCT2 Cut Off Tool - Automatic Index NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts. Submitted By: Date: Approved By: Date: 3

Table of Contents TABLE OF CONTENTS GENERAL Table of Contents...4 Gasket Selection Guide...8 SECTION 1 Couplings and Fittings Style 107H QuickVic Rigid Coupling for Steel...12 Style 07 Zero-Flex Rigid Coupling...12 Style W07 AGS Rigid Coupling...13 Style 177 QuickVic Flexible Coupling for Steel...14 Style 77 Standard Flexible Coupling...15 Style W77 AGS Flexible Coupling...17 Style 75 Flexible Coupling...18 Style 750 Reducing Coupling...19 Style 741 Vic-Flange Adapter...20 Style W741 AGS Vic-Flange Adapter...20 Style 743 Vic-Flange Adapter...21 Style 72 Outlet Coupling...22 Style 791 and 792 Vic-Boltless Coupling...23 Style 791 Locking Pins...23 Style 78 Snap-Joint Coupling...23 Style HP-70 Rigid Coupling...24 Style HP-70ES Coupling with ES Gasket... 24 Style 307 Transition Coupling...25 Style 171 Composite Flexible Coupling...25 Lubricant...26 Gaskets...26 Flange Parts Styles 741, W741, 743 and 441...28 Flange Gaskets Styles 741, W741, 743 and 441...29 Style 72 Outlet Coupling Gaskets...30 Metal Liners Styles 77, 75 and 78 Couplings...30 Plated Trackhead Bolts and Nuts...31 Installation-Ready Bolts and Nuts...31 Go-No-Go Tape...31 Elbows No. 10 90...32 No. 11 45...32 No. W10 AGS 90...32 No. W11 AGS 45...32 No. 12 22Z\x...33 No. 13 11Z\v...33 No. W12 AGS 22Z\x...33 No. W13 AGS 11Z\v...33 No. 100 and No. 110 1Z\x D Long Radius Elbows...34 No. W100 and W110 1Z\x D AGS Long Radius Elbow...34 No. R-10G and No. R-10F Reducing Base Support Elbow...35 No. 10-DR Drain Elbow... 35 No. 20 Tee...36 No. 29M Tee with Threaded Branch...36 No. W20 AGS Tee...36 No. 35 Cross...................................... 37 No. 33 True Y...37 No. W35 AGS Cross...37 No. W33 AGS True Y...37 No(s). 40, 42, and 43 Adapter Nipples...38 No(s). W42, W43 and W49 AGS Adapter Nipples...38 No. 80 Female Threaded Adapter... 39 No(s). 18 and 19 Adapter Elbows...39 No. 25 Grooved Reducing Tee... 40 No. W25 AGS Grooved Reducing Tee...42 No. 29T Threaded Reducing Tee... 45 No. 50 Concentrc Reducers... 46 No. 51 Eccentric Reducers... 46 No. W50 AGS Concentric Reducers... 47 No. W51 AGS Eccentric Reducers... 47 No.(s) 53, 54 and 55 Swaged Nipples...50 No. 52 Reducer Threaded Small End...51 No. 30 Lateral... 52 No. W30 AGS Lateral...52 No. 60 Cap...53 No. W60 AGS Cap...53 No. 30R Reducing Lateral... 54 No. W30R AGS Reducing Lateral...55 No. 32 Tee Wye...56 No. 61 Bull Plug...56 No. 48 Hose Nipples... 57 No(s). 41, 45 and 46 Flanged Adapter Nipples...57 No. W45R AGS Flanged Adapter Nipple...58 3D Cast Bends for Abrasive Services.................... 58 Long Radius Bend 3D...59 Long Radius Bends 5D...60 Long Radius Bends 6D...61 Extra Heavy ES Fittings... 62 Style 47 Clearflow Dielectric Waterway Carbon Steel (IPS) to Copper (CTS) Transition Fitting... 63 Style 47-GG Carbon Steel (IPS) to Copper (CTS) Transition Fitting...63 SECTION 2 Hole Cut Products Styles 920/920N Female Threaded Mechanical-T Outlet...66 Styles 920/920N Grooved Mechanical-T Outlet...67 Vic-Tap II Hot Tap...68 Styles 920/920N Mechanical-T Cross...69 Style 923 Vic-Let Strapless Outlet...72 Style 924 Vic-O-Well One Nut Thermometer Well...72 SECTION 3 Valves and Specialties Series 761 Vic-300 MasterSeal Butterfly Valve...74 Series W761 Vic-300 (14 24 ) 300 psi AGS Butterfly Valve. 76 Series W709 AGS Butterfly Valve...76 Series 706 (14 24 ) 300 psi Butterfly Valve...77 Series 700 Butterfly Valve...78 Series 721 Grooved End Ball Valve...78 Series 726 Grooved End Ball Valve...79 Series 722 Threaded Brass Ball Valve...80 Series 712 Swinger Check Valve...80 Series 713 High Pressure Swinger Check Valve...80 4

Table of Contents Series 716H/716 Vic-Check Valve...81 Series 779 Venturi Check Valve...82 Series W715 AGS Vic-Check Valve...82 Series 377 Balancing Plug Valve...83 Series 318 Sump Ejector Kit...83 Series 731-D Suction Diffuser...84 Series W731-D AGS Suction Diffuser...84 Series 730 Vic-Strainer Tee Type Strainer...85 Series W730 AGS Vic-Strainer Tee Type Strainer...85 Series 732 Vic-Strainer Wye Type Strainer...85 Series W732 AGS Vic-Strainer Wye Type Strainer...86 Style 150 Mover Expansion Joint...86 SECTION 4 Hydronic Balancing Products Manual Balancing Valves TA Series 786 STAS...88 TA Series 787 STAD...88 Series 78K STADK...88 TA Series 788 STAF...89 TA Series 789 STAG...89 TA Series 786 and 787 Insulation Kits...89 TA Series 788 and 789 Insulation Kits...90 TA Series 786 Drain Kit...90 Spare Parts...90 Automatic Balancing Valves Series 76T...91 Series 76B...91 Series 76K...91 Series 76V...91 Automatic Balancing Valve Cartridges...93 Series 799/79V, KOIL-KIT Coil Pack... 94 Differential Pressure Controllers TA Series 793 Differential Pressure Controller...103 TA Series 794 Differential Pressure Controller...103 TA Series 793 Insulation Kits...103 TA Differential Pressure Controller Accessories...104 Balancing Instruments TA Series 736 TA Link Differential Pressure Sensor...105 Universal Gauge Meter Conversion Kit...105 Series 73M TA CMI...105 TA Series 734 Scope Balancing Instrument...106 SECTION 5 Plain End Couplings and Fittings Style 99 Roust-A-Bout Coupling...108 Gaskets for Style 99 Couplings...108 Plated Trackhead Bolts and Nuts...109 No(s). 40-P, 42-P and 43-P Adapter Nipples... 109 Plain End Fittings No. 10-P 90 Elbow...110 No. 11-P 45 Elbow...110 No. 20-P Tee...110 No. 61-P Bull Plug...110 No. 33-P Wye...111 No. 30-P Lateral...111 No. 35-P Cross... 111 No. 53-P Swaged Nipples... 112 No. 25-P Reducing Tee... 112 SECTION 6 Vic-Press System for Schedule 10S Stainless Steel Pipe Vic-Press 304 Seal Selection...114 Style P500 Loose Seals...115 Style P597 Standard Coupling...115 Style P596 Male Adapter Threaded... 115 Series P569 Type 316 Stainless Steel Ball Valve...116 Series P589 Brass Body Ball Valve...116 Style P586 90 Elbow Short Tangent... 116 Style P542 90 Street Elbow...117 Style P591 45 Elbow...117 Style P543 45 Street Elbow...117 Style P592 Tee...118 Style P593 Tee Reducing Branch...118 Style P588 Tee Reducing Branch Threaded... 118 Style P594 Concentric Reducer...119 Style P595 Flange Adapter...119 Style P565 Flange Adapter...119 Style P587 Transition Nipple...119 Style P584 Threaded Union....................... 120 Style P599 Female Adapter Threaded... 120 Style P561 Adapter...120 Style P540 End Cap...120 PFT510 Vic-Press Tool...121 Vic-Press 316 Seal Selection...122 Style P500 Loose Seals...123 Style P507 Standard Coupling...123 Style P576 Male Adapter Threaded... 123 Style P508 Slip Coupling...123 Series P569 Stainless Steel Ball Valve...124 Series P569 Repair Kits...124 Series P589 Brass Body Ball Valve...124 Style P568 90 Elbow Short Tangent... 125 Style P562 90 Street Elbow...125 Style P571 45 Elbow...125 Style P563 45 Street Elbow...126 Style P572 Tee...126 Style P573 Tee Reducing Branch...126 Style P578 Tee Reducing Branch Threaded... 127 Style P574 Concentric Reducer...127 Style P575 Flange Adapter...127 Style P566 Flange Adapter...128 Style P577 Adapter Nipple...128 Style P585 Threaded Union...128 Style P579 Female Adapter Threaded... 129 TABLE OF CONTENTS 5

Table of Contents TABLE OF CONTENTS Style P560 End Cap...129 PFT510 Vic-Press Tool...129 SECTION 8 HDPE Products Style 995 HDPE Coupling...132 Style 994 Flange Adapter for HDPE Pipe...133 Style 997 HDPE-to-Steel Transition Coupling...133 SECTION 9 Copper Connection Products Style 607 QuickVic Rigid Coupling for Copper...136 Style 622 Copper Mechanical-T Bolted Branch Outlet...136 Style 622 Copper Mechanical-T Cross...137 Style 641 Copper Vic-Flange Adapter...137 No. 610 90 Elbow...138 No. 611 45 Elbow...138 No. 620 Tee...138 No. 660 Cap... 138 Reducers No. 650 Concentric Reducer Groove x Groove... 138 No. 652 Concentric Reducer Grooved x Cup... 139 No. 625 Reducing Tee Grooved x Groove... 139 No. 626 Reducing Tee Grooved x Cup...140 Series 608 Copper Connection Butterfly Valve...141 Series 608 Accessories...141 SECTION 11 - Aluminum Products Aluminum Couplings...144 Aluminum Fittings...144 SECTION 12 - Stainless Steel Products Ductile Iron Couplings for Stainless Steel Pipe Style 89 Rigid Coupling...146 Style W89 AGS Rgid Coupling...146 Stainless Steel and Duplex Couplings Style 489 Rigid Coupling...147 Style 489DX Duplex Rigid Coupling...147 Style 475 Flexible Coupling...148 Style 475DX Duplex Flexible Coupling...148 Style 77DX Duplex Flexible Coupling...148 Style 77S Flexible Coupling...149 Stainless Steel Flange Adapters Style 441 Vic-Flange Adapter...149 No. 445F and No. 445R Stainless Steel Flange Adapter Nipples...149 Schedule 10S Stainless Steel Fittings No. 410 SS 90 Elbow...150 No. 411 SS 45 Elbow...150 No. 412 SS 22Z\x Elbow... 150 No. 413 SS 11Z\v Elbow...150 Tees...151 Reducing Tee...152 No. 430 SS 45 Lateral...153 No. 433 SS True Y, No. 435 SS Cross...153 No(s). 442 SS and 443 SS Adapter Nipples...153 Concentric Reducer...154 Eccentric Reducer...155 No. 460 SS Cap...155 Schedule 40S Stainless Steel Fittings No. 410H SS 90 Elbow...156 No. 411H SS 45 Elbow...156 No. 412 SS 22Z\x Elbow... 156 No. 413 SS 11Z\v Elbow...156 No. 420H SS Tee...157 No. 425H SS Reducing Tee...157 No. 430H SS 45 Lateral...158 No. 433H SS True Y...158 No. 435H SS Cross... 158 No(s). 440H SS, 442H SS and 443H SS Adapter Nipples...158 No. 450H SS Concentric Reducer... 159 No. 451H SS Eccentric Reducer... 159 No. 60 SS Cap...160 Stainless Steel Valves Series 763 Butterfly Valve...161 Series 726-S Ball Valve...162 Series 712-S Check Valve...162 SECTION 13 - Large Diameter AGS Vic-Ring Products Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings...164 Style W07 AGS Rigid Coupling for AGS Vic-Ring System...165 Style W77 AGS Flexible Coupling for AGS Vic-Ring System..166 SECTION 14 Vic-Easy Roll Grooving Tools Vic-Easy Roll Grooving Tools Field Portable VE12...168 VE26 S/C/SS/P...168 VE26/VE46 Power Drive Kit...168 VE46/P...169 VE226 B/S/M/C/BSS/MSS/P...169 VE226 Power Drive Kit...170 Vic-Easy Roll Grooving Tools Field Fabrication VE106 Groove-N-Go...171 VE272SFS...172 VE270FSD...173 VE416FSD...174 VE416FS...176 VE450FSD...178 Vic-Easy Roll Grooving Tools Shop Fabrication VE268...179 VE414MC...180 VE460...182 Victaulic Fabrication Cell...184 Vic-Easy Tool Accessories VPD752 Power Drive...185 VAPS112 Pipe Stand...185 VAPS224 Pipe Stand...185 VAPS1672 Pipe Stand...186 VE436MC Quick Change Slide Conversion Kit...186 6

Table of Contents Cut Grooving Tools VG28GD...187 VG824...188 VG412...189 VG Vic-Groover...190 Pipe Preparation Tool Accessories Power Mule...192 PT-100-A Go/No-Go Pipe Tape...192 PT-102 AGS Go/No-Go Pipe Tape...193 Tool Carry Bag...193 Vic-Adjustable Cut Groovers for PVC Plastic Pipe VPG26...194 VPG824...194 Hole Cutting Tools VHCT900...195 HCT908...195 Accessories...195 Vic-Tap II Hot Tap...196 Vic-Press Tool PFT510...196 Pipe Cut-Off Tools VCT1 Manual...197 VCT2 Automatic... 197 Accessories...197 Terms and Conditions of Tool Rental...199 Terms and Conditions of Tool Sale...120 GENERAL INFORMATION Terms and Conditions of Sale...Inside Back Cover Warranty...Inside Back Cover Victaulic Contact Information... Back Cover TABLE OF CONTENTS 7

Gaskets Gasket Selection Guide Refer to publication 05.01 for more information. Gasket Selection Guide Standard Gaskets IPS GRADE IMPORTANT PLEASE READ BEFORE ORDERING. Gasket selection must always be specified on your order. TEMP. RANGE COMPOUND COLOR CODE E 30 F to +230 F EPDM Green Stripe EHP 30 F to +250 F EPDM Red and Green Stripe T 20 F to +180 F Nitrile Orange Stripe EW 30 F to + 230 F EPDM Green W Ambient EPDM E2 Double Green Stripe GENERAL SERVICE RECOMMENDATIONS Recommended for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/NSF 61 for cold +86 F/+30 C and hot +180 F/+82 C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Recommended for hot water service within the specified temperature range. UL classified in accordance with ANSI/NSF 61 for cold +86 F/+30 C and hot +180 F/+82 C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Recommended for petroleum products, hydrocarbons, air with oil vapors, vegetable and mineral oils within the specified temperature range; not recommended for hot dry air over +140 F/+60 C and water over +150 F/+66 C. NOT RECOMMENDED FOR HOT WATER SERVICES. Recommended for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. WRAS-approved material to BS 6920 for cold and hot potable water service up to +149 F/+65 C. NOT RECOMMENDED FOR PETROLEUM SERVICES. UL Classified in accordance with ANSI/NSF 61 for cold +86 F/+30 C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Special Gaskets IPS GRADE TEMP. RANGE COMPOUND M2 40 F to +160 F Epichloro hydrin COLOR CODE White Stripe V 30 F to +180 F Neoprene Yellow Stripe O +20 F to +300 F Fluoro Blue elastomer Stripe 30 F to +350 F Silicone L A +20 F to +180 F White Nitrile T EndSeal HMT (Standard or EndSeal) 20 F to +150 F 20 F to +180 F Nitrile High Modulus Nitrile Red Gasket White Gasket No External Identification Orange and Silver Stripe GENERAL SERVICE RECOMMENDATIONS Specially compounded to provide superior service for common aromatic fuels at low temperatures. Also suitable for certain ambient temperature water services. Recommended for hot lubricating oils and certain chemicals. Good oxidation resistance. Will not support combustion. Recommended for many oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons to +300 F/+149 C. NOT RECOMMENDED FOR HOT WATER SERVICES. Recommended for dry heat, air without hydrocarbons to +350 F/+177 C and certain chemical services. No carbon black content. May be used for food. Meets FDA requirements. Conforms to CFR Title 21 Part 177.2600. Not recommended for hot water services over +150 F/+66 C or for hot, dry air over +140 F/+60 C. NOT RECOMMENDED FOR HOT WATER SERVICES. Specially compounded with excellent oil resistance and a high modulus for resistance to extrusion. Temperature Range 20 F/ 29 C to +150 F/+66 C. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recommended for hot water services over +150 F/+66 C or for hot, dry air over +140 F/+60 C. For maximum gasket life under pressure extremes, temperature should be limited to +120 F/+49 C. Specially compounded with excellent oil resistance and a high modulus for resistance to extrusion. Temperature range is 20 F to +180 F/ 29 C to +82 C. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recommended for hot water services over +150 F/+66 C or for hot, dry air over +140 F/+60 C. For maximum gasket life under pressure extremes, the temperature should be limited to +120 F/+49 C. 8

Gaskets Special Gaskets AWWA and Transition Coupling GRADE S 20 F M 20 F TEMP. RANGE COMPOUND COLOR CODE to +180 F Nitrile Orange Stripe to +200 F Halogenated Butyl Brown Stripe GENERAL SERVICE RECOMMENDATIONS Specially compounded to conform to ductile pipe surfaces. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; not recommended for hot dry air over +140 F and water over +150 F. NOT RECOMMENDED FOR HOT WATER SERVICES. Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Readily conforms to ductile pipe surfaces. UL classified in accordance with ANSI/NSF 61 for cold +86 F/+30 C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Gasket Selection Guide 9

10

SECTION 1 Couplings and Fittings Couplings and Fittings 11

Style 107H QuickVic Rigid Coupling for Steel Style 07 Zero-Flex Rigid Coupling Grooved IPS Pipe Couplings Grooved IPS Pipe Couplings QuickVic Rigid Coupling for Steel Style 107H Refer to publication 06.21 Style 107H Grade EHP Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With Grade EHP or T Gasket Outside Dia. Painted Galv. SPARE PARTS Grade EHP Gasket 2 2.375 2.1 $63.00 $80.00 $49.50 2Z\x 2.875 2.5 72.50 91.50 54.00 3 3.500 3.1 83.50 107.00 61.50 4 4.500 3.9 117.00 151.00 82.50 5 5.563 5.1 151.00 196.50 117.50 6 6.625 6.8 198.50 258.00 138.50 8 8.625 10.5 313.00 407.50 201.50 NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing. Section 1 Grooved IPS Pipe Couplings Zero-Flex Rigid Coupling Style 07 (with Style 77 gasket) Refer to publication 06.02 Style 07 Grade E or T Gasket or Flushseal Gasket PIPE Apprx. Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket COUPLING COMPLETE with FlushSeal E or T Gasket SPARE PARTS Plated Bolt & Nut Nom. Outside Dia.. Painted Galv. Painted Galv. No. * 1 1.315 1.6 $58.00 $73.00 $82.50 $98.00 2 C\, x 2 1Z\v 1.660 1.7 58.00 73.00 82.50 98.00 2 C\, x 2 1Z\x 1.900 1.9 58.00 73.00 82.50 98.00 2 C\, x 2 2 2.375 2.2 73.50 92.50 97.00 116.50 2 Z\x x 2Z\x 2Z\x 2.875 2.6 84.00 106.50 117.00 137.00 2 Z\x x 2C\v 3 3.500 3.0 97.50 124.50 123.50 151.50 2 Z\x x 2Z\x 4 4.500 4.8 136.00 175.50 172.50 213.00 2 Z\x x 2C\v 5 5.563 6.7 175.50 229.00 273.50 482.00 2 B\, x 3Z\v 6 6.625 8.3 232.00 300.50 322.50 394.50 2 B\, x 3Z\v 8 8.625 15.1 365.50 475.00 426.00 533.00 2 C\v x 4Z\v 10 10.750 23.5 528.50 705.50 635.50 807.50 2 M\, x 6Z\x 12 12.750 28.2 590.50 791.00 723.00 929.50 2 M\, x 6Z\x * Number of bolts equals number of segments supplied. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. 12

Style W07 AGS Rigid Coupling Grooved IPS Pipe Couplings Zero-Flex Rigid Coupling Style 07 (with Style 77 gasket) Refer to publication 06.02 Style 07 Silicone Grade L Gasket or Fluoroelastomer Grade O Gasket COUPLING COMPLETE With Silicone Grade L Gasket COUPLING COMPLETE With Fluoroelastomer Grade O Gasket PIPE Wgt. Ea. SPARE PARTS Plated Bolt & Nut Nom. Outside Dia.. Painted Galv. Painted Galv. No. * 1 1.315 1.6 $133.50 $148.00 $381.50 $396.50 2 C\, x 2 1Z\v 1.660 1.7 133.50 148.00 364.00 380.50 2 C\, x 2 1Z\x 1.900 1.9 179.50 193.50 382.00 397.00 2 C\, x 2 2 2.375 2.2 141.00 159.00 363.00 381.00 2 Z\x x 2Z\x 2Z\x 2.875 2.6 161.00 183.00 408.50 429.50 2 Z\x x 2C\v 3 3.500 3.0 180.50 207.00 456.50 483.50 2 Z\x x 2Z\x 4 4.500 5.3 268.50 307.00 747.50 785.00 2 Z\x x 2C\v 5 5.563 6.7 483.50 532.50 814.50 865.00 2 B\, x 3Z\v 6 6.625 8.3 568.00 631.50 1024.00 1088.50 2 B\, x 3Z\v 8 8.625 15.1 710.00 811.50 1244.00 1345.50 2 C\v x 4Z\v 10 10.750 23.5 957.50 1135.00 1571.50 1747.50 2 M\, x 6Z\x 12 12.750 28.2 1099.00 1299.50 2175.50 2376.00 2 M\, x 6Z\x * Number of bolts equals number of segments supplied. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. NOTE: For 14-24 Style 07 couplings contact your local Victaulic sales representative. Rigid Coupling AGS Style W07 Refer to publication 20.02 14 24 26 48 AGS Style W07 Grade E or T FlushSeal Gasket Wgt. Ea COUPLING COMPLETE With FlushSeal E or T Gasket PIPE SPARE PARTS Plated Bolt & Nut Nom. Outside Dia.. Painted Galv. No. 14 14.000 48.9 $642.50 $824.00 2 1 x 5Z\x 16 16.000 60.8 836.50 1067.50 2 1 x 5Z\x 18 18.000 71.2 966.50 1252.00 2 1 x 5Z\x 20 20.000 81.7 1321.00 1655.00 2 1Z\, x 5Z\x 22 22.000 116.0 1531.00 2038.00 2 1Z\, x 5Z\x 24 24.000 116.2 1693.00 2145.00 2 1Z\, x 5Z\x 26 26.000 205.0 + + 4 1C\, x 6 28 28.000 220.0 + + 4 1C\, x 6 30 30.000 227.0 + + 4 1Z\v x 7 32 32.000 242.0 + + 4 1Z\v x 7 34 34.000 255.0 + + 4 1Z\v x 7 36 36.000 268.0 + + 4 1Z\v x 7 38 38.000 340.0 + + 4 1Z\x x 7 40 40.000 340.0 + + 4 1Z\x x 7 42 42.000 360.0 + + 4 1Z\x x 7 44 44.000 390.0 + + 4 1Z\x x 7 46 46.000 415.0 + + 4 1Z\x x 7 48 48.000 425.0 + + 4 1Z\x x 7 + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Section 1 Grooved IPS Pipe Couplings 13

Style 177 QuickVic Flexible Coupling for Steel Grooved IPS Pipe Couplings Section 1 Grooved IPS Pipe Couplings Rigid Coupling AGS Style W07 Refer to publication 20.02 14 24 26 48 QuickVic Flexible Coupling for Steel Style 177 Refer to publication 06.20 AGS Style W07 Silicone Grade L FlushSeal Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With FlushSeal Silicone Grade L Gasket Outside Dia. Painted Galv. No. SPARE PARTS Plated Bolt & Nut 14 14.000 48.9 $1611.00 $1792.50 2 1 x 5Z\x 16 16.000 60.8 1772.50 2003.00 2 1 x 5Z\x 18 18.000 71.2 1949.50 2234.50 2 1 x 5Z\x 20 20.000 81.7 2259.50 2593.50 2 1Z\, x 5Z\x 22 22.000 116.0 + + 2 1Z\, x 5Z\x 24 24.000 116.2 2461.50 2912.50 2 1Z\, x 5Z\x 26 26.000 205.0 + + 4 1C\, x 6 28 28.000 220.0 + + 4 1C\, x 6 30 30.000 227.0 + + 4 1Z\v x 7 32 32.000 242.0 + + 4 1Z\v x 7 34 34.000 255.0 + + 4 1Z\v x 7 36 36.000 268.0 + + 4 1Z\v x 7 38 38.000 340.0 + + 4 1Z\x x 7 40 40.000 340.0 + + 4 1Z\x x 7 42 42.000 360.0 + + 4 1Z\x x 7 44 44.000 390.0 + + 4 1Z\x x 7 46 46.000 415.0 + + 4 1Z\x x 7 48 48.000 425.0 + + 4 1Z\x x 7 + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Style 177 Grade EHP or T Gasket Wgt. Ea. COUPLING COMPLETE With Grade EHP or T Gasket PIPE SPARE PARTS Nom. Outside Grade EHP or T Dia. Painted Galv. Gasket 2 2.375 2.0 $63.50 $84.00 $49.50 2Z\x 2.875 2.4 74.00 103.50 54.00 3 3.500 3.1 82.50 114.00 61.50 4 4.500 3.7 118.50 167.50 82.50 5 5.563 4.8 179.50 258.00 117.50 6 6.625 6.3 212.50 304.50 138.50 8 8.625 10.5 345.00 513.00 201.50 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing. 14

Style 77 Standard Flexible Coupling Grooved IPS Pipe Couplings Standard Coupling Style 77 Refer to publication 06.04 C\v 12 14 24 Style 77 Grade E or T Gasket or FlushSeal Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket COUPLING COMPLETE With FlushSeal E or T Gasket Outside Dia. Painted Galv. Painted Galv. No.* SPARE PARTS Plated Bolt & Nut C\v 1.050 1.1 $41.50 $55.50 $65.00 $80.00 2 C\, x 2 1 1.315 1.2 41.50 55.50 65.00 80.00 2 C\, x 2 1Z\v 1.660 2.0 54.50 73.00 80.00 99.00 2 Z\x x 2Z\x 1Z\x 1.900 2.1 59.50 77.50 83.50 103.50 2 Z\x x 2Z\x 2 2.375 2.6 63.50 84.00 87.50 109.50 2 Z\x x 2Z\x 2Z\x 2.875 3.1 74.00 103.50 106.50 135.50 2 Z\x x 2C\v 3 3.500 3.7 82.50 114.00 110.00 142.50 2 Z\x x 2C\v 3Z\x 4.000 5.6 117.50 165.50 158.50 208.00 2 B\, x 3Z\v 4 4.500 6.7 118.50 167.50 159.00 208.00 2 B\, x 3Z\v 5 5.563 10.5 179.50 258.00 277.50 360.50 2 C\v x 4Z\v 6 6.625 12.0 212.50 304.50 308.00 404.00 2 C\v x 4Z\v 8 8.625 20.8 345.00 513.00 415.50 569.50 2 M\, x 5 10 10.750 31.1 562.00 805.50 667.00 896.50 2 1 x 6 12 12.750 27.8 639.00 915.00 783.00 1031.00 2 1 x 6Z\x 14 14.000 39.2 914.00 1261.00 1021.00 1352.00 2 1 x 3Z\x 16 16.000 45.0 1198.00 1624.50 1345.00 1780.00 2 1 x 3Z\x 18 18.000 64.1 1402.00 1942.50 1579.00 2131.00 2 1Z\, x 4 20 20.000 74.8 2203.50 2966.00 2476.00 3447.00 2 1Z\, x 4 22 22.000 82.6 2204.00 2959.50 2 1Z\, x 4 24 24.000 89.6 2415.00 3243.00 2787.00 3635.50 2 1Z\, x 4 28 I.D.** 35.500 95.0 + + + + 4 1 x 5Z\x 30 I.D.** 37.880 127.2 + + + + 4 1 x 5Z\x * Number of bolts equals number of segments supplied. NOTE: 14 24 for cut groove original groove systems only. For 14 60 roll groove systems Victaulic offers the Style W77 coupling. + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. ** Requires Vic-Ring for assembly. For cut groove systems only. For roll groove systems please see AGS Style W77. Section 1 Grooved IPS Pipe Couplings 15

Grooved IPS Pipe Couplings Standard Coupling Style 77 Refer to publication 06.04 Style 77 Silicone Grade L Gasket or Fluoroelastomer Grade O Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With Silicone Grade L Gasket COUPLING COMPLETE With Fluoroelastomer Grade O Gasket Outside Dia. Painted Galv. Painted Galv. No.* SPARE PARTS Plated Bolt & Nut C\v 1.050 1.1 $116.00 $129.50 $356.50 $372.00 2 C\, x 2 1 1.315 1.2 116.00 129.50 356.50 372.00 2 C\, x 2 1Z\v 1.660 2.0 172.50 190.00 353.50 372.50 2 C\, x 2 1Z\x 1.900 2.1 182.00 199.50 376.50 395.00 2 Z\x x 2Z\x 2 2.375 2.6 126.00 146.50 316.00 336.50 2 Z\x x 2Z\x 2Z\x 2.875 3.1 146.50 174.50 356.50 386.50 2 Z\x x 2C\v 3 3.500 3.7 159.50 191.00 396.50 428.50 2 Z\x x 2C\v 3Z\x 4.000 5.6 + + 408.50 491.00 2 B\, x 3Z\v 4 4.500 6.7 239.00 287.00 649.50 697.00 2 B\, x 3Z\v 5 5.563 10.5 452.50 529.50 736.50 816.00 2 C\v x 4Z\v 6 6.625 12.0 511.50 603.00 903.50 995.00 2 C\v x 4Z\v 8 8.625 20.8 659.00 824.50 1116.50 1283.00 2 M\, x 5 10 10.750 31.1 981.00 1224.00 1580.50 1824.50 2 1 x 6 12 12.750 27.8 1136.50 1412.50 2188.50 2463.00 2 1 x 6Z\x Section 1 Grooved IPS Pipe Couplings * Number of bolts equals number of segments supplied. + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. NOTE: 14 60 standard for this size range is the W77 AGS flexible coupling. 16

Style W77 AGS Flexible Coupling Grooved IPS Pipe Couplings Flexible Coupling AGS Style W77 Refer to publication 20.03 14 24 26 60 AGS Style W77 Grade E or T FlushSeal Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With FlushSeal E or T Gasket Outside Dia. Painted Galv. No. * SPARE PARTS Plated Bolt & Nut 14 14.000 47.5 $661.50 $914.50 2 1 x 5Z\x 16 16.000 57.8 868.00 1178.00 2 1 x 5Z\x 18 18.000 65.0 1016.00 1408.50 2 1 x 5Z\x 20 20.000 82.3 1356.50 1819.50 2 1Z\, x 5Z\x 22 22.000 107.0 1578.00 2085.50 2 1Z\, x 5Z\x 24 24.000 106.8 1750.50 2350.50 2 1Z\, x 5Z\x 26 26.000 205.0 + + 4 1Z\, x 6 28 28.000 220.0 + + 4 1Z\, x 6 30 30.000 227.0 + + 4 1Z\v x 7 32 32.000 242.0 + + 4 1Z\v x 7 34 34.000 255.0 + + 4 1Z\v x 7 36 36.000 268.0 + + 4 1Z\v x 7 38 38.000 340.0 + + 4 1Z\x x 7 40 40.000 340.0 + + 4 1Z\x x 7 42 42.000 360.0 + + 4 1Z\x x 7 44 44.000 390.0 + + 4 1Z\x x 7 46 46.000 415.0 + + 4 1Z\x x 7 48 48.000 425.0 + + 4 1Z\x x 7 54 54.000 648.0 + + 4 1Z\x x 7 56 56.000 676.0 + + 4 1Z\x x 7 60 60.000 720.0 + + 4 1Z\x x 7 + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. NOTE: 14 60 standard for this size range is the W77 AGS flexible coupling. Section 1 Grooved IPS Pipe Couplings 17

Style 75 Flexible Coupling Grooved IPS Pipe Couplings Section 1 Grooved IPS Pipe Couplings Flexible Coupling AGS Style W77 Refer to publication 20.03 14 24 26 60 Flexible Coupling Style 75 Refer to publication 06.05 AGS Style W77 Silicone Grade L FlushSeal Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With FlushSeal Silicone Grade L Gasket Outside Dia. Painted Galv. No. SPARE PARTS Plated Bolt & Nut 14 14.000 47.5 $1630.50 $1883.00 2 1 x 5Z\x 16 16.000 57.8 1804.50 2113.00 2 1 x 5Z\x 18 18.000 65.0 1998.50 2323.00 2 1 x 5Z\x 20 20.000 82.3 2295.50 2759.00 2 1Z\, x 5Z\x 22 22.000 107.0 + + 2 1Z\, x 5Z\x 24 24.000 106.8 2566.00 3119.00 2 1Z\, x 5Z\x 26 26.000 205.0 + + 4 1Z\, x 6 28 28.000 220.0 + + 4 1Z\, x 6 30 30.000 227.0 + + 4 1Z\v x 7 32 32.000 242.0 + + 4 1Z\v x 7 34 34.000 255.0 + + 4 1Z\v x 7 36 36.000 268.0 + + 4 1Z\v x 7 38 38.000 340.0 + + 4 1Z\x x 7 40 40.000 340.0 + + 4 1Z\x x 7 42 42.000 360.0 + + 4 1Z\x x 7 44 44.000 390.0 + + 4 1Z\x x 7 46 46.000 415.0 + + 4 1Z\x x 7 48 48.000 425.0 + + 4 1Z\x x 7 54 54.000 648.0 + + 4 1Z\x x 7 56 56.000 676.0 + + 4 1Z\x x 7 60 60.000 720.0 + + 4 1Z\x x 7 + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Styles 75 Grade E or T Gasket or FlushSeal Gasket PIPE Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket COUPLING COMPLETE With FlushSeal E or T Gasket SPARE PARTS Plated Bolt & Nut Nom. Outside Dia. Painted Galv. Painted Galv. 1 1.315 1.3 $42.00 $52.50 $67.00 $78.50 C\, x 2 1Z\v 1.660 1.4 43.00 55.50 70.00 83.50 C\, x 2 1Z\x 1.900 1.5 52.50 65.00 76.50 91.50 C\, x 2 2 2.375 1.8 63.50 84.00 78.50 94.00 C\, x 2 2Z\x 2.875 1.9 74.00 103.50 94.00 110.50 C\, x 2 3 3.500 2.9 82.50 114.00 99.50 119.50 Z\x x 2C\v 4 4.500 4.1 118.50 167.50 141.50 173.50 Z\x x 2C\v 5 5.563 5.8 179.50 258.00 241.50 287.50 B\, x 3Z\v 6 6.625 7.0 212.50 304.50 266.50 323.50 B\, x 3Z\v 8 8.625 12.9 345.00 513.00 443.50 531.50 C\v x 4Z\v Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. 18

Style 750 Reducing Coupling Grooved IPS Pipe Couplings Flexible Coupling Style 75 Refer to publication 06.05 Style 75 Silicone Grade L Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With Silicone Grade L Gasket Outside Dia. Painted Galv. SPARE PARTS Plated Bolt & Nut 1 1.315 1.3 $110.50 $125.50 C\, x 2 1Z\v 1.660 1.4 161.50 174.00 C\, x 2 1Z\x 1.900 1.5 175.50 188.00 C\, x 2 2 2.375 1.7 117.00 130.00 C\, x 2 2Z\x 2.875 1.9 133.50 148.50 C\, x 2 3 3.500 2.9 148.00 167.50 Z\x x 2C\v 3Z\x 4.000 2.9 + + Z\x x 2C\v 4 4.500 4.1 222.00 250.50 Z\x x 2C\v 5 5.563 5.8 416.50 457.50 B\, x 3Z\v 6 6.625 7.0 472.00 522.00 B\, x 3Z\v 8 8.625 12.9 582.50 669.50 C\v x 4Z\v + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Reducing Coupling Style 750 Refer to publication 06.08 Style 750 Grade E or T Gasket Aprx Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket PIPE SPARE PARTS Nominal Plated Bolt & Nut Painted Galv. 2 x 1 2.0 $104.50 $125.50 C\, x 2 1Z\x 2.0 84.50 102.00 C\, x 2 2Z\x x 2 2.9 109.50 137.00 C\, x 2 3 x 2 4.6 124.50 157.00 Z\x x 2C\v 2Z\x 4.1 108.00 137.00 Z\x x 2C\v 4 x 2 8.8 196.50 247.50 B\, x 3Z\v 2Z\x 8.3 176.50 232.00 B\, x 3Z\v 3 6.4 165.50 213.50 B\, x 3Z\v 5 x 4 10.8 222.00 291.00 C\v x 4Z\v 6 x 4 16.1 334.00 421.00 C\v x 4Z\v 5 12.6 293.00 379.50 C\v x 4Z\v 8 x 6 22.3 500.00 632.00 M\, x 5 10 x 8 32.0 640.50 811.50 1 x 6 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. Support rings required on vertical installations. Please specify on order. NOTE: See Spare Parts Section for spare part prices. Section 1 Grooved IPS Pipe Couplings 19

Style 741 Vic-Flange Adapter Style W741 AGS Vic-Flange Adapter Grooved IPS Pipe Couplings Vic-Flange Adapters Style 741 Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges. Refer to publication 06.06 Style 741 Grade E or T Gasket PIPE Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket Nom. Outside Dia. Painted Galv. STYLE 741 Hinged 2 2.375 3.1 $248.50 $300.50 2Z\x 2.875 4.8 308.50 379.50 3 3.500 5.3 333.00 412.00 4 4.500 7.4 444.50 550.50 5 5.563 8.6 516.00 638.50 6 6.625 9.9 562.50 700.00 8 8.625 16.2 635.50 814.50 10 10.750 24.2 1004.00 1276.50 12 12.750 46.8 1313.50 1687.50 The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL. flanges. Flanged Adapter Nipples are also available in C\v and larger sizes in ANSI CL. 125, CL. 150, CL 300 and other ANSI ratings - quoted on application. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. Section 1 Grooved IPS Pipe Couplings Vic-Flange Adapters Style W741 Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges. Refer to publication 20.04 Style W741 Grade E, T or L Gasket PIPE Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket COUPLING COMPLETE With Grade L Gasket Nom. Outside Dia. Painted Galv. 14 14.000 70.0 $2568.50 $3160.00 + 16 16.000 88.0 2981.00 3694.50 + 18 18.000 101.0 3669.00 4675.50 + 20 20.000 115.0 4414.00 5648.00 + 24 24.000 160.0 5648.00 7286.50 + + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. The AGS Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL. flanges. NOTE: See Spare Parts Section for spare part prices. 20

Style 743 Vic-Flange Adapter Grooved IPS Pipe Couplings Vic-Flange Grooved Flange Adapters Style 743 Grooved Pipe Adapters to ANSI Class 300 Flanges (with Style 741 gasket) Refer to publication 06.06 Style 743 Grade E or T Gasket PIPE Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket Nominal Outside Diameter Painted Galv. 2 2.375 4.8 $310.50 $364.50 2Z\x 2.875 7.4 359.50 429.50 3 3.500 9.1 491.50 582.50 4 4.500 15.3 653.50 792.00 5 5.563 17.7 743.50 898.50 6 6.625 23.4 864.50 1059.00 8 8.625 34.3 991.50 1249.50 10 10.750 48.3 1578.00 1961.50 12 12.750 70.5 1684.50 2173.50 Utilizes standard ANSI 300 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI class 300 flanges. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. Vic-Flange Adapter Notes Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is otherwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices. Typical applications where a Victaulic flange washer should be used are: 1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket. 2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter. 3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange. 4. When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g., a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter. 5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above. Section 1 Grooved IPS Pipe Couplings 21

Style 72 Outlet Coupling Grooved IPS Pipe Couplings Section 1 Grooved IPS Pipe Couplings Outlet Coupling Style 72 Refer to publication 06.10 Style 72 Grade E or T Gasket - For Style 72 gaskets see below. Nominal OUTLET COUPLING COMPLETE with Grade E or T Gasket SPARE PARTS Run x Branch Aprx Wgt. Ea. Painted Female Thd. Branch Galv. Plated Bolt & Nut 1Z\x x Z\x 1.4 $111.50 $132.00 C\, x 2 C\v 2.8 111.50 132.00 C\, x 2 1 2.8 111.50 132.00 C\, x 2 2 x Z\x 3.5 114.00 140.50 C\, x 2 C\v 2.5 114.00 140.50 C\, x 2 1 3.2 114.00 140.50 C\, x 2 2Z\x x Z\x 4.5 175.50 216.00 Z\x x 2C\v C\v 4.6 175.50 216.00 Z\x x 2C\v 1 6.0 175.50 216.00 Z\x x 2C\v 1Z\v 5.0 197.50 250.50 B\, x 3Z\v 1Z\x 5.0 223.50 279.50 B\, x 3Z\v 3 x C\v 4.5 169.00 205.50 Z\x x 2C\v 1 8.9 223.50 279.50 B\, x 3Z\v 1Z\v 8.5 256.00 352.50 B\, x 3Z\v 1Z\x 8.5 256.00 352.50 B\, x 3Z\v 4 x C\v 6.3 247.50 308.00 Z\x x 2C\v 1 6.5 247.50 308.00 Z\x x 2C\v 1Z\x 11.6 351.50 447.50 B\, x 3Z\v 2 14.6 351.50 447.50 B\, x 3Z\v 6 x 1 19.3 496.00 644.50 C\v x 4Z\v 1Z\x 19.3 496.00 644.50 C\v x 4Z\v 2 19.5 496.00 644.50 C\v x 4Z\v Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. 22

Style 791 and 792 Vic-Boltless Coupling Style 791 Locking Pins Style 78 Snap-Joint Coupling Grooved IPS Pipe Couplings Vic-Boltless Coupling * Styles 791 Coupling and 792 Assembly Tool Refer to publication 06.11 Style 791 Grade E or T Gasket PIPE Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket Nom. Outside Dia. Painted Galv. 2 2.375 1.8 $104.00 + 2Z\x 2.875 2.7 130.00 + 3 3.500 2.6 130.00 + 4 4.500 4.8 142.50 + 6 6.625 6.3 198.00 + 8 8.625 12.0 309.50 + * Coupling complete includes one-piece hinged housing, gasket (specify choice on order) and locking pin only. Assembly Tool required for assembly (purchased separately). + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. Style 792 Removable Assembly Tool One size fits all sizes Style 791 Couplings $139.50 Locking Pins^ Style 791 ^ Victaulic locking pins must be used to assemble Style 791 couplings. Use of other objects are strictly prohibited. Snap-Joint Coupling Style 78 (with Style 77 gasket) Refer to publication 06.09 Style 791 SPARE PARTS Nom. Pipe Locking Pin Price Per Piece 2 B\zn x 2 $5.50 2Z\x C\, x 2 5.50 3 C\, x 2 5.50 4 M\zn x 2Z\, 6.00 6 Z\x x 2C\zn 6.50 8 Z\x x 2M\zn 7.00 Style 78 Grade E or T Gasket or FlushSeal Gasket PIPE Wgt. Ea. COUPLING COMPLETE With Grade E or T Gasket COUPLING COMPLETE With FlushSeal Grade E or T Gasket Nom. Outside Dia. Painted Galv. Painted Galv. 1 (a) 1.315 0.8 $99.00 $115.00 $104.50 $123.50 1Z\v (a) 1.660 1.1 116.50 139.50 127.00 152.00 1Z\x (a) 1.900 1.7 111.50 133.00 117.00 138.50 2 (c) 2.375 1.7 107.00 117.00 112.00 133.00 2Z\x (c) 2.875 2.5 117.50 140.50 145.00 173.50 3 (c) 3.500 2.8 137.00 168.50 164.00 199.00 4 (c) 4.500 5.5 175.50 225.50 216.00 268.50 5 (c) 5.563 9.8 356.50 437.00 439.50 537.00 6 (c) 6.625 10.7 374.00 472.50 467.50 569.50 8 (c) 8.625 15.3 573.00 717.50 649.00 800.00 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. (a) Available with steel toggle locking assembly only. (c) Available with cast handle only. NOTE: See Spare Parts Section for spare part prices. Section 1 Grooved IPS Pipe Couplings 23

Style HP-70 Rigid Coupling Style HP-70ES Coupling with ES Gasket Grooved IPS Pipe Couplings Rigid Coupling Style HP-70 (with Style 77 Gasket) Refer to publication 06.12 Style HP-70 Grade E or T Gasket Wgt. Ea. COUPLING COMPLETE with E or T Gasket PIPE SPARE PARTS Plated Bolt & Nut Outside Nom. Dia. Painted Galv. 2 2.375 3.2 $76.50 $103.50 B\, x 2C\v 2Z\x 2.875 4.0 87.50 117.50 B\, x 3Z\x 3 3.500 4.4 97.50 132.00 B\, x 3Z\x 4 4.500 7.5 141.50 201.50 C\v x 4Z\v 6 6.625 16.0 254.50 366.50 M\, x 5Z\x 8 8.625 26.3 407.50 585.00 1 x 5Z\x 10 10.750 32.8 752.50 1029.50 1 x 6Z\x 12 12.750 42.1 1095.50 1466.00 1 x 6Z\x 14 14.000 64.0 1307.00 1837.50 1Z\v x 4Z\x 16 16.000 72.0 1592.00 2196.00 1Z\v x 4Z\x Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Section 1 Grooved IPS Pipe Couplings EndSeal Coupling Style HP-70ES With ES Gasket Refer to publication 06.13 Style HP-70ES ES Gasket PIPE Wgt. Ea. COUPLING COMPLETE With ES Gasket ES Gasket Only Plated Bolt & Nut Nom. Outside Dia. Painted Galv. 2 2.375 3.2 $103.00 $130.50 $59.00 B\, x 2C\v 2Z\x 2.875 4.0 119.50 155.00 73.50 B\, x 3Z\x 3 3.500 4.6 133.50 175.50 80.00 B\, x 3Z\x 4 4.500 8.2 188.00 254.00 102.50 C\v x 4Z\v 6 6.625 16.4 324.50 434.50 146.00 M\, x 5Z\x 8 8.625 26.0 500.50 676.00 196.50 1 x 5Z\x 10 10.750 37.2 937.00 1241.00 319.00 1 x 6Z\x 12 12.750 42.0 1183.50 1673.50 364.00 1 x 6Z\x + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. For use with cement-lined and plastic-coated pipe where protection at pipe ends is desired. When EndSeal Couplings (Style HP-70ES) are used, special pipe grooving dimensions are required. See publication 25.02 for details. Fittings for use with EndSeal Couplings are of special dimensions and should be specified as EndSeal Fittings when ordering. 24

Style 307 Transition Coupling Grooved IPS Pipe Couplings Transition Coupling (AWWA to IPS) Style 307 Refer to publication 23.03 Style 307 Grade M or S FlushSeal Gasket Nom. PIPE Mating Pipe O.D. IPS Steel Wgt. Ea. COUPLING COMPLETE With Grade M or S FlushSeal Gasket AWWA Ductile Painted Galv. Grade M or S FlushSeal Gasket Only Price Ea. SPARE PARTS Bolt & Nut 3 3.500 3.960 6.0 $226.50 $303.50 $96.00 Z\x x 2C\v 4 4.500 4.800 8.0 259.00 356.50 100.00 Z\x x 3Z\v 6 6.625 6.900 9.0 315.50 429.00 108.00 B\, x 3Z\v 8 8.625 9.050 18.0 392.50 583.50 119.50 C\v x 5 10 10.750 11.100 22.0 504.00 742.00 209.00 M\, x 6Z\x 12 12.750 13.200 31.1 669.50 999.00 216.50 M\, x 6Z\x Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. Composite Flexible Coupling Style 171 Refer to publication 06.22. Style 171 Grade E2 EPDM Gasket Nom. PIPE Wgt. Ea. COUPLING COMPLETE With Grade E2 EPDM Gasket SPARE PARTS Outside Dia. E2 EPDM Gasket 1Z\x 1.900 0.8 $34.00 $19.50 2 2.375 0.9 38.50 21.00 2Z\x 2.875 1.0 48.50 26.00 3 3.500 1.6 62.50 32.50 4 4.500 1.6 92.00 42.00 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Section 1 Grooved IPS Pipe Couplings 25

Lubricant Gaskets Spare Parts Lubricant LUBRICANT PACK With 12 Tubes 4Z\x oz. Each $313.00 CONTAINER One Quart Container 136.50 To ensure easy assembly and service of all your Victaulic installations, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold. NOTE: Victaulic lubricant is not recommended for use with HDPE pipe. LUBRICANT USAGE GUIDE of Gasket Number of Gaskets of Gasket Number of Gaskets of Gasket Number of Gaskets Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart 2 55 400 8 13 100 16 6 45 3 36 270 10 11 80 18 5 35 4 26 200 12 8 60 20 4 30 6 17 125 14 7 50 24 3 20 NOTE: Victaulic lubricant is not recommended for use with HDPE pipe. Section 1 Spare Parts Gaskets For Gasket Selection Guide, See Page 9 Gaskets for Styles 07, HP-70, 75, 77, 78, 791, 997, 775, 475, 489 and 89 Couplings Nom. Standard Gaskets Special Gaskets Grade E EPDM or Grade T Nitrile FlushSeal Grade E or T Grade O Fluoroelastomer Grade V Black Neoprene FlushSeal Grade A White Nitrile FlushSeal Grade O Fluoroelastomer C\v $30.50 $57.00 $356.50 + $96.00 $391.00 1 30.50 57.00 356.50 + 96.00 391.00 1Z\v 32.00 60.50 341.50 + 152.50 818.00 1Z\x 34.00 61.50 360.50 + 124.50 496.00 2 34.00 62.50 295.00 + 154.50 360.50 2Z\x 40.00 76.50 333.50 + 158.50 + 3 43.00 76.50 368.50 + 239.50 + 3Z\x 54.00 99.00 + 4 54.00 102.50 603.50 + 244.50 + 4Z\x 69.50 5 69.50 180.50 647.00 + 246.50 + 6 75.00 185.00 792.50 + 248.50 998.50 8 102.50 191.50 907.50 + 298.50 1605.00 10 128.50 246.50 1181.50 + 411.50 1734.50 12 149.50 293.50 1749.50 + 586.00 2045.50 13Z\x + 14 228.00 339.00 + + + + 16 314.50 469.00 + + + + 18 377.50 564.50 + + + + 20 580.50 867.50 + + + + 22 + + + + 24 804.00 1196.00 + + + + + Quoted on application. Contact Victaulic for pricing and availability. 26

Spare Parts For Style W07/W77 AGS Gaskets Nom. FlushSeal Grade E or T Gasket Grade L Silicone Gasket 14 $218.00 $1281.50 16 300.50 1377.50 18 362.00 1440.00 20 555.00 1585.50 24 769.50 1613.50 26 967.50 + 28 1034.50 + 30 1101.50 + 32 1168.00 + 34 + + 36 1297.50 + 40 1433.00 + 42 1499.50 + 44 + + 46 1607.00 + 48 1677.00 + 54 + + 56 + + 60 + + + Quoted on application. Contact Victaulic for pricing and availability. NOTE: Prices shown for 26 48 painted are for the Grade E EPDM gasket only. For pricing on Grade T nitrile gaskets contact Victaulic. Silicone Gaskets for Styles 07, HP-70, 75, 77, 78, 791, 997, 77S, 475, 489 and 89 Couplings Nom. Grade L Silicone FlushSeal Grade L Silicone C\v $107.00 + 1 107.00 $126.50 1Z\v 153.50 412.50 1Z\x 160.50 238.50 2 99.00 147.50 2Z\x 115.00 171.00 3 124.00 185.00 3Z\x + 4 180.00 267.00 4Z\x + + 5 353.50 528.50 6 387.50 579.00 8 432.50 646.00 10 562.00 842.50 12 664.00 993.00 13Z\x + 14 1014.50 1520.00 16 + + 18 + + 20 + + 24 + + Section 1 Spare Parts + Quoted on application. Contact Victaulic for pricing and availability. 27

Flange Parts Styles 741, W741, 743 and 441 Spare Parts Style 750 Gaskets NOTE: For pricing couplings complete with any special gaskets, contact Victaulic. Gasket recommendations can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for recommendations when a question arises. Standard E or T Gaskets for Style 750 Nom. Run x Brch. Grade E or T 2 x 1 $32.00 1Z\x 32.00 2Z\x x 2 41.50 3 x 2 47.00 2Z\x 47.00 4 x 2 54.50 2Z\x 55.00 3 57.00 5 x 4 66.50 6 x 4 75.50 5 82.50 8 x 6 91.50 10 x 8 110.00 Section 1 Spare Parts Flange Parts For Styles 741, W741, 743 & 441 Vic-Flange Adapters For Styles 741, W741, 743 & 441 Vic-Flange Adapters Flange BOLT AND NUT FLANGE WASHERS Qty. Per Set Price Per Set Plated Style 741 ANSI Plated Style 743 2 4 B\, x 3 + $88.00 + 2Z\x 4 B\, x 3 + 92.50 + 3 4 B\, x 3 + 108.50 + 4 8 B\, x 3 + 125.50 + 5 8 C\v x 3Z\x + 152.50 + 6 8 C\v x 3Z\x + 174.00 + 8 8 C\v x 3Z\x + 219.50 + 10 12 M\, x 4 + 304.00 + 12 12 M\, x 4 + 444.50 + 14 * 12 1 x 4Z\x + 484.50 16 * 16 1 x 4Z\x + 860.50 18 * 16 1Z\, x 4C\v + 917.00 20 * 20 1Z\, x 5Z\v + + 24 * 20 1Z\v x 5C\v + + + Quoted on application. Contact Victaulic for pricing and availability. * Flange parts supplied for Style W741 AGS Flange 28

Flange Gaskets Styles 741, W741, 743 and 441 Spare Parts Flange Gaskets For Style 741, W741, 743 & 441 Vic-Flange Adapters For Style 741, W741, 743 & 441 Vic-Flange Adapters Flange Standard Gaskets Style 741/743 Grade E or T Gasket Only Style 741/743 Grade L Silicone Special Gaskets Style 741 Grade O Fluoroelastomer 2 $27.50 + + 2Z\x 32.50 + + 3 35.00 + + 4 45.50 + + 5 54.50 + + 6 61.50 + + 8 82.50 + + 10 104.50 + + 12 122.00 + + 14 * 150.50 + 16 * 167.00 + 18 * 243.50 + 20 * 263.00 + 24 * 292.00 + * Flange gaskets supplied for Style W741 AGS Flange + Quoted on application. Contact Victaulic for pricing and availability. Section 1 Spare Parts 29

Style 72 Outlet Coupling Gaskets Metal Liners Styles 77, 75 and 78 Couplings Spare Parts Style 72 Gaskets NOTE: For pricing couplings complete with any special gaskets, contact Victaulic. Gasket recommendations can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for recommendations when a question arises. Standard E or T Gasket for Style 72 Nom. Run x Brch. Style 72 1Z\x x Z\x $53.50 C\v 53.50 1 53.50 2 x Z\x 54.00 C\v 54.00 1 54.00 2Z\x x Z\x 110.50 C\v 110.50 1 110.50 1Z\v 124.00 1Z\x 124.00 Nom. Run x Brch. Style 72 3 x C\v $90.00 1 127.50 1Z\v 127.50 1Z\x 127.50 4 x C\v 127.50 1 127.50 1Z\v + 1Z\x 198.50 2 198.50 6 x 1 259.00 1Z\x 259.00 2 259.00 + Quoted on application. Contact Victaulic for pricing and availability. M-2 Gaskets Section 1 Spare Parts Nominal Grade M-2 Gaskets 1Z\x + 2 + 2Z\x + 3 + 4 + 6 + 8 + + Quoted on application. Contact Victaulic for pricing and availability. Metal Liners Styles 77, 75 and 78 Couplings (Type 304 Stainless Steel) Styles 77, 75 and 78 Couplings Nom. 2 + 2Z\x + 3 + 4 + 5 + 6 + 8 + 10 + Nom. 12 + 14 + 16 + 18 + 20 + 24 + 28 + 30 + + Quoted on application. Contact Victaulic for pricing and availability. 30

Plated Trackhead Bolts and Nuts Installation-Ready Bolts and Nuts Go-No-Go Tape Spare Parts Plated Trackhead Bolts and Nuts Plated Trackhead Bolts and Nuts Bolt and Nut C\, x 2 $15.50 Z\x x 2Z\x 16.00 2C\v 16.00 3 16.00 3Z\v 16.00 B\, x 2C\v 19.00 3Z\v 19.00 3Z\x 20.50 4 25.50 5 32.00 C\v x 4Z\v 22.50 5 30.00 M\, x 5 39.50 5Z\x 45.50 6Z\x 49.50 Bolt and Nut 1 x 3Z\x $43.00 5 40.00 5Z\x 49.50 6 49.50 6Z\x 52.50 1Z\, x 4 67.00 5Z\x 67.00 1Z\v x 3Z\x 67.00 5Z\x 195.50 1C\, x 5C\v 228.00 1Z\x x 4Z\x 216.50 5C\v 244.00 1C\v x 6 427.00 1M\, x 6 565.00 Installation-Ready Bolts and Nuts Nylon Coated Bolts and Nuts for Styles 107H, 177 and 607 Installation-Ready Couplings Bolt and Nut C\, x 2Z\x $27.50 Z\x x 3 25.50 B\, x 3Z\v 30.50 4 37.50 Section 1 Spare Parts Go-No-Go Tape Tool Model Part Number Purchase Price PT-100-A/PT-101 Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $62.00 Box of 6 RW75-100-KIT 340.00 * Each box contains 6 Go-No-Go Tapes. # Tool discount applies. 31

Elbows No. 10 90, No. 11 45 No. W10 AGS 90, No. W11 AGS 45 Grooved IPS Pipe Fittings Grooved IPS Pipe Fittings Elbows Refer to publication 07.01 No. 10 No. 11 Elbows 90 Elbow or 45 Elbow Nom. 90 Elbow No. 10 45 Elbow No. 11 Wgt. Ea.. C - E Painted Galv. Wgt. Ea.. C - E Painted Galv. C\v 0.5 2.25 $140.50 $148.00 0.5 1.50 $140.50 $148.00 1 0.6 2.25 75.00 99.50 0.6 1.75 75.00 94.50 1Z\v 1.0 2.75 75.00 99.50 0.9 1.75 75.00 94.50 1Z\x 1.2 2.75 75.00 99.50 0.9 1.75 75.00 94.50 2 1.8 3.25 75.00 99.50 1.3 2.00 75.00 94.50 2Z\x 3.2 3.75 75.00 99.50 2.2 2.25 75.00 94.50 3 4.5 4.25 132.50 165.50 3.1 2.50 132.50 156.00 3Z\x 5.6 4.50 153.00 203.00 3.95 2.75 153.00 203.00 4 13.3 5.00 144.00 201.50 5.6 3.00 144.00 187.00 4Z\x 10 (sw) 5.25 + + 6.0 (sw) 3.13 + + 5 11.7 5.50 343.50 444.00 8.3 3.25 343.50 425.50 6 17.2 6.50 403.50 534.00 10.8 3.50 403.50 509.00 8 29.9 7.75 839.50 1106.50 20.4 4.25 839.50 1053.50 10 63.3 9.00 1469.50 1902.50 37.5 4.75 1469.50 1603.00 12 74.0 10.00 2352.00 3034.50 66.7 5.25 2352.00 2740.50 Section 1 Grooved IPS Pipe Fittings AGS Elbows Refer to publication 20.05 VICTAULIC No.W10 No. W10 VICTAULIC No.W11 No. W11 + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. AGS Elbows 90 Elbow or 45 Elbow Nom. 90 Elbow No. W10 45 Elbow No. W11 Wgt. Ea. C - E Painted Galv. Wgt. Ea. C - E Painted Galv. 14 150.8 14.00 $2152.00 $2792.00 63.0 5.80 $1611.00 $2083.50 16 184.3 16.00 2794.00 3614.00 93.8 6.63 1813.50 2251.50 18 272.3 18.00 3546.00 4419.50 129.0 7.46 2125.50 2605.50 20 312.0 20.00 4674.50 5799.50 165.3 8.28 2792.00 3432.00 24 559.8 24.00 6768.50 8425.50 264.5 9.94 4287.50 5225.00 26 586.0 26.00 + + 278.0 10.80 + + 28 680.0 28.00 + + 325.0 11.60 + + 30 887.0 30.00 + + 420.0 12.40 + + 32 1012.0 32.00 + + 483.0 13.25 + + 36 1283.0 36.00 + + 617.0 14.91 + + 40 1907.0 40.00 + + 915.0 16.57 + + 42 2169.0 42.00 + + 1042.0 17.93 + + 46 1527.0 (sw) 46.00 + + 761.0 (sw) 19.10 + + 48 1661.0 (sw) 48.00 + + 828.0 (sw) 19.90 + + 54 2094.0 (sw) 54.00 + + 1042.0 (sw) 22.40 + + 56 2252.0 (sw) 56.00 + + 1120.0 (sw) 23.20 + + 60 2583.0 (sw) 60.00 + + 1285.0 (sw) 24.90 + + NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. + Quoted on application. Contact Victaulic for pricing and availability. 32

No. 12 22Z\x, No. 13 11Z\v No. W12 AGS 22Z\x, No. W13 AGS 11Z\v Grooved IPS Pipe Fittings Elbows Refer to publication 07.01 No. 12 Standard & Gooseneck No. 13 Elbows 22Z\x Elbow or 11Z\v Elbow Nom. 22Z\x Elbow No. 12 11Z\v Elbow No. 13 Wgt. Ea. C - E Painted Galv. Wgt. Ea. C - E Painted Galv. 1 0.6 3.25 $473.00 $489.00 0.3 (sw) 1.38 $188.50 + 1Z\v 0.8 1.75 82.00 103.50 0.5 1.38 82.00 $103.50 1Z\x 0.8 1.75 82.00 103.50 0.5 1.38 82.00 103.50 2 1.4 3.75 82.00 103.50 1.0 1.38 188.50 220.00 2Z\x 1.5 4.00 82.00 103.50 1.5 1.50 188.50 220.00 3 3.1 4.50 117.50 147.50 2.1 1.50 117.50 146.50 3Z\x 4.0 (sw) 2.50 275.00 368.00 2.7 (sw) 1.75 275.00 324.50 4 5.6 2.88 155.50 201.50 3.6 1.75 144.00 191.00 5 7.8 (sw) 2.88 476.00 574.00 5.0 (sw) 2.00 476.00 560.00 6 12.2 6.25 435.50 554.50 7.0 2.00 435.50 526.00 8 20.0 7.75 907.50 1127.00 10.1 2.00 775.00 921.50 10 30.0 4.38 1197.00 1554.50 11.8 2.13 1117.50 1334.00 12 40.0 4.88 1617.50 2006.00 29.3 2.25 1617.50 1959.00 + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. Gooseneck design. AGS Elbows Refer to publication 20.05 No. W12 No. W13 AGS Elbows 22Z\x Elbow or 11Z\v Elbow Nom. 22Z\x Elbow No. W12 11Z\v Elbow No. W13 Wgt. Ea. C - E Painted Galv. Wgt. Ea. C - E Painted Galv. 14 46.0 5.00 $1273.50 $1686.00 32.0 3.50 $1152.00 $1445.50 16 58.0 5.00 1527.00 2138.50 42.0 4.00 1418.50 1891.00 18 65.0 5.50 1849.00 2624.00 53.2 4.50 1717.50 2328.00 20 78.6 6.00 2321.50 3648.00 65.0 5.00 2102.00 2912.50 24 140.0 7.00 3961.00 4581.00 60.0 6.00 3668.00 3700.50 26 122.0 6.80 + + 92.0 5.00 + + 28 136.0 7.00 + + 104.0 5.30 + + 30 151.0 7.30 + + 112.0 5.30 + + 32 167.0 7.50 + + 124.0 5.50 + + 36 194.0 7.80 + + 140.0 5.50 + + 40 322.0 8.80 + + 234.0 6.30 + + 42 348.0 9.00 + + 246.0 6.30 + + 46 392.0 9.30 + + 280.0 6.50 + + 48 420.0 9.50 + + 303.0 6.80 + + 54 592.0 12.00 + + 437.0 8.80 + + 56 627.0 12.30 + + 465.0 9.00 + + 60 698.0 12.80 + + 512.0 9.30 + + NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. + Quoted on application. Contact Victaulic for pricing and availability. Section 1 Grooved IPS Pipe Fittings 33

No. 100 and No. 110 1Z\x D Long Radius Elbows No. W100 and W110 1Z\x D AGS Long Radius Elbow Grooved IPS Pipe Fittings Long Radius 1Z\x D Elbows Refer to publication 07.01 No. 100 Long Radius 90 Long Radius Elbow or 45 Long Radius Elbow Nom. 90 Long Rad. Elbow No. 100 * 45 Long Rad. Elbow No. 110 * Wgt. Ea. C - E Painted Galv. Wgt. Ea. C - E Painted Galv. 2 2.5 4.38 $170.00 $223.00 1.8 2.75 $147.50 $187.00 2Z\x 4.1 5.13 213.00 244.50 2.8 3.13 472.00 531.00 3 6.0 5.88 170.00 223.00 4.9 3.38 147.50 187.00 4 12.3 7.50 253.00 338.50 7.3 4.00 179.50 238.50 5 (s) 18.2 9.25 1284.00 1471.00 14.8 4.88 1192.50 1308.50 6 30.4 10.75 735.00 965.00 17.4 5.50 527.00 675.50 8 66.0 14.25 1756.00 2245.00 36.0 7.25 916.00 1191.00 10 107.0 15.00 3502.00 4221.00 57.0 6.25 2626.50 2995.50 12 156.0 18.00 3538.00 4695.50 90.0 7.50 3041.50 3734.00 No. 110 (s) steel. Victaulic fittings are made of ductile iron, except those marked (s) * See pages 59 61 for long radius 3-D, 5-D and 6-D bends. Section 1 Grooved IPS Pipe Fittings AGS Long Radius 1Z\x D Elbows Refer to publication 20.05 VICTAULIC No.W100 No. W100 VICTAULIC No.W110 No. W110 AGS Long Radius 90 Long Radius Elbow or 45 Long Radius Elbow Nom. 90 Long Rad. Elbow No. W100 45 Long Rad. Elbow No. W110 Wgt. Ea. C - E Painted Galv. Wgt. Ea. C - E Painted Galv. 14 154.0 21.00 $2869.00 $3722.50 77.0 8.75 $2148.50 $2750.00 16 201.0 24.00 3725.00 4817.50 100.0 10.00 2417.50 3001.00 18 256.0 27.00 4728.00 5892.50 128.0 11.25 2834.00 3474.00 20 317.0 30.00 6231.50 7732.50 158.0 12.50 3722.50 4575.50 24 458.0 36.00 9024.00 11233.50 229.0 15.00 5654.00 6966.00 26 877.0 39.00 + + 421.0 16.00 + + 28 1019.0 42.00 + + 491.0 17.30 + + 30 1268.0 45.00 + + 612.0 18.50 + + 32 1517.0 48.00 + + 733.0 19.80 + + 36 1925.0 54.00 + + 935.0 22.30 + + 40 2883.0 60.00 + + 1397.0 24.90 + + 42 3260.0 63.00 + + 1583.0 26.00 + + 46 3260.0 (sw) 69.00 + + 1210.0 (sw) 286.00 + + 48 2471.0 (sw) 72.00 + + 1314.0 (sw) 296.00 + + 54 3120.0 (sw) 81.00 + + 1648.0 (sw) 336.00 + + 56 3355.0 (sw) 84.00 + + 1769.0 (sw) 346.00 + + 60 3850.0 (sw) 90.00 + + 2023.0 (sw) 376.00 + + NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. + Quoted on application. Contact Victaulic for pricing and availability. 34

No. R-10G and No. R-10F Reducing Base Support Elbow No. 10-DR Drain Elbow Grooved IPS Pipe Fittings Reducing Base Support Elbows Refer to publication 07.01 Reducing Base Support Elbows Grooved X Grooved or Grooved X Flanged Nom. Grooved x Grooved No. R-10G Grooved x Flanged No. R-10F Inlet x Outlet Wgt. Each Wgt. Each Painted Galv. Painted Galv. 6 x 4 19.0 $1223.00 $1434.50 33.0 $1357.50 + 6 x 5 23.0 1384.50 + 38.0 1537.00 + 8 x 6 33.0 1858.00 2192.00 51.0 2063.50 + 10 x 8 61.0 2678.50 3191.00 88.0 2975.50 + No. R-10G Grooved x Grooved + Quoted on application. Contact Victaulic for pricing and availability. No. R-10F Grooved x Flanged Drain Elbow No. 10-DR Refer to publication 10.05 USA Request Victaulic publication 10.01 for details. Drain Elbow Nom. Aprx Wgt. Ea. Painted Galv. 2Z\x 5.2 $175.50 $225.50 3 5.3 224.00 267.50 4 8.8 227.50 309.00 6 18.7 399.00 568.00 Section 1 Grooved IPS Pipe Fittings 35

No. 20 Tee, No. 29M Tee with Threaded Branch No. W20 AGS Tee Grooved IPS Pipe Fittings Tees Tees Standard Tee or Tee with Threaded Branch Refer to publication 07.01 Nom. Wgt. Ea. Tee No. 20 Tee with Male Threaded Branch No. 29M No. 20 No. 29M Painted Galv. Painted Galv. C\v 0.6 $151.00 $163.00 + + 1 1.0 116.50 152.00 1Z\v 1.5 116.50 152.00 $243.50 $286.00 1Z\x 2.0 116.50 152.00 379.50 447.00 2 3.0 116.50 152.00 243.50 286.00 2Z\x 4.3 116.50 152.00 3 6.8 159.50 218.00 3Z\x 7.9 (sw) 647.00 + + + 4 11.9 242.50 329.50 503.50 692.50 4Z\x 15.0 (sw) + + 5 17.8 565.50 717.50 1447.00 + 6 25.7 653.00 891.00 1292.00 1520.50 8 47.6 1430.50 1877.00 + + 10 73.0 2859.50 3701.50 + + 12 99.0 3985.00 5090.00 + + + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. Section 1 Grooved IPS Pipe Fittings AGS Tees Refer to publication 20.05 VICTAULIC No.W20 No. W20 AGS Standard Tee Nom. Aprx Wgt. Ea. Tee - No. W20 Painted Galv. 14 102.0 $2880.50 $3587.00 16 123.5 3253.00 4131.50 18 281.0 4066.00 5242.50 20 350.0 5826.00 7386.00 24 503.7 8882.00 11520.00 26 634.0 + + 28 741.0 + + 30 855.0 + + 32 1190.0 + + 36 1608.0 + + 38 1496.0 + + 40 1968.0 + + 42 2891.0 + + 46 2620.0 + + 48 3805.0 + + 54 3656.0 + + 56 3961.0 + + 60 4325.0 + + (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. + Quoted on application. Contact Victaulic for pricing and availability. 36

No. 35 Cross, No. 33 True Y No. W35 AGS Cross, No. W33 AGS True Y Grooved IPS Pipe Fittings Cross and Wye Refer to publication 07.01 No. 35 No. 33 Cross and Wye Steel Cross or Steel 90 True Y Nom. Aprx Wgt. Ea. Steel Cross (sw) No. 35 Steel 90 True Y (sw) No. 33 Aprx Wgt. Ea. Painted Galv. Painted Galv. C\v 0.9 + + 1 1.3 $280.50 $323.50 1.1 $430.00 + 1Z\v 2.1 337.50 392.50 1.5 430.00 + 1Z\x 2.5 363.00 421.50 1.8 430.00 $511.50 2 3.8 (d) 207.50 247.00 2.5 430.00 511.50 2Z\x 6.1 (d) 207.50 247.00 4.3 430.00 511.50 3 10.5 (d) 369.00 452.00 6.1 514.00 611.00 3Z\x 11.5 742.00 884.50 9.6 + + 4 15.8 (d) 612.00 753.00 10.0 673.00 809.00 4Z\x 18.5 + + 5 20.0 1247.50 1503.50 15.0 963.00 1156.50 6 28.0 1601.00 1943.50 22.3 1189.00 1448.00 8 48.0 2109.50 2609.50 36.0 1712.50 2104.50 10 121.5 3460.50 4280.50 69.9 2843.50 3483.50 12 110.0 4993.50 6221.00 80.0 3140.50 3973.00 + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. AGS Cross and Wye Refer to publication 20.05 No. W35 VICTAULIC No.W35 VICTAULIC No.W33 AGS Cross and Wye Steel Cross or Steel 90 True Y Steel Cross (sw) No. W35 Steel 90 True Y (sw) No. W33 Nom. Wgt. Ea. Wgt. Ea. Painted Galv. Painted Galv. 14 168.0 $3741.50 $5120.00 114.0 $2585.50 $3227.00 16 216.0 5394.50 6227.00 144.0 3593.50 4291.00 18 278.0 6580.00 7604.00 185.0 4190.00 5115.50 20 348.0 7853.00 11290.50 216.0 5606.50 6938.50 24 488.0 11408.50 15922.50 343.0 9997.50 10535.00 NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. Section 1 Grooved IPS Pipe Fittings No. W33 37

No(s). 40, 42, and 43 Adapter Nipples No(s). W42, W43 and W49 AGS Adapter Nipples Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings Adapter Nipples Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x Grooved Refer to publication 07.01 No. 40 No. 42 No. 43 AGS Adapter Nipples Same prices apply for: No. W42 AGS Grooved x Beveled No. W43 AGS Grooved x AGS Grooved No. W49 AGS Grooved x Original Grooved Refer to publication 20.05 No. W42 No. W43 No. W49 Adapter Nipples Grooved X Threaded, Grooved X Beveled, or Grooved X Grooved Nom. Price Per Length 3 4 6 8 10 12 C\v $45.50 $45.50 + + + + 1 45.50 45.50 $71.50 + + + 1Z\v 45.50 45.50 71.50 + + + 1Z\x 45.50 45.50 71.50 $83.00 $95.00 $109.00 2 45.50 45.50 71.50 83.00 95.00 109.00 2Z\x 52.50 52.50 95.50 95.50 111.50 127.00 3 63.50 63.50 103.00 124.00 145.00 165.00 4 104.00 104.00* 104.00 171.00 201.50 232.00 5 215.00* 215.00* 215.00 299.00 369.00 424.50 6 275.50 275.50* 275.50* 356.00 413.50 469.50 8 309.00* 309.00* 309.00* 410.50 563.50 633.00 10 399.00* 399.00* 401.50* 432.50 667.00 793.00 12 542.00* 542.00* 542.00* 542.00 844.00 1005.50 NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items. Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6 and smaller are made from Schedule 40 pipe; for nominal sizes 8 and larger, from Schedule 30 pipe. NOTE: For Pump Package Nipples with 1 Z\x hole cut to receive Style 923 Vic-Let or Style 924 Vic-O-Well add $106.50 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-cancellable and nonreturnable. * These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved. Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application. GALVANIZED AND EXTRA HEAVY ARE NON-CANCELLABLE AND NON-RETURNABLE ITEMS. Contact Victaulic for pricing on seamless adapter nipples. + Quoted on application. Contact Victaulic for pricing and availability. AGS Adapter Nipples No. W42 AGS Grooved X Beveled, No. W43 AGS Grooved X AGS Grooved, or No. W49 AGS Grooved X Original Grooved Nom. Length * Wgt. Ea. 14 8 36.0 $667.50 16 8 42.0 762.50 18 8 47.0 1040.50 20 8 52.0 1170.50 24 8 63.0 1302.00 26 12 104.0 + 28 12 112.0 + 30 12 120.0 + 32 12 128.0 + 36 12 190.0 + 40 12 211.0 + 42 12 222.0 + 46 12 243.0 + 48 12 254.0 + NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items. + Quoted on application. Contact Victaulic for pricing and availability. Please specify nipple style number when ordering. Unless otherwise specified, Adapter Nipples are constructed using standard wall pipe. * Other lengths available. Contact Victaulic for details. NOTE: For original roll grooved 14 24 adapters please contact your local Victaulic sales representative. 38

No. 80 Female Threaded Adapter No(s). 18 and 19 Adapter Elbows Grooved IPS Pipe Fittings Female Threaded Adapter Refer to publication 07.01 No. 80 Female Threaded Adapter Nom. Wgt. Each No. 80 Painted Galv. C\v 1.0 $387.50 $429.00 1 1.0 415.00 445.50 1Z\v 1.5 219.00 245.50 1Z\x 1.5 284.00 302.50 2 1.4 134.00 157.00 2Z\x 1.5 134.00 157.00 3 2.9 155.50 190.00 4 4.5 238.00 298.50 Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. Adapter Elbows Refer to publication 07.01 No. 18 No. 19 Adapter Elbows 90 Adapter Elbow or 45 Adapter Elbow Nom. 90 Adapter Elbow No. 18 45 Adapter Elbow No. 19 Wgt. Ea. Wgt. Ea. Painted Galv. Painted Galv. C\v 0.5 $193.50 $205.50 0.5 $196.50 $208.00 1 0.5 129.50 160.50 0.6 1Z\v 0.9 145.00 160.50 0.6 1Z\x 1.1 184.50 214.00 0.9 213.00 227.50 2 2.5 129.50 160.50 1.9 2Z\x 3.0 224.50 245.50 2.3 219.00 226.50 3 5.8 208.00 255.00 5.0 374.00 401.00 6 17.6 644.00 814.50 12.7 783.50 870.50 Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. Section 1 Grooved IPS Pipe Fittings 39

No. 25 Grooved Reducing Tee Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings Reducing Tee Refer to publication 07.01 No. 25 Reducing Tee Reducing Tee No. 25 Wgt. Each Run x Branch Painted Galv. 1 x 1 x C\v 1.0 $198.50 $233.00 1Z\v x 1Z\v x 1 1.3 205.00 233.00 1Z\x x 1Z\x x C\v 1.5 207.50 + 1 1.5 285.00 293.50 1Z\v 1.7 216.00 239.00 2 x 2 x C\v (d) 2.5 268.50 316.50 1 (d) 2.7 245.50 287.50 1Z\v 1.8 306.00 322.00 1Z\x (d) 3.0 245.50 292.00 2Z\x x 2Z\x x C\v 3.9 331.00 359.00 1 (d) 3.8 245.50 287.50 1Z\v 4.2 369.50 435.50 1Z\x (d) 3.9 245.50 292.00 2 (d) 4.5 245.50 292.00 3 x 3 x C\v (d) 5.7 382.00 398.00 1 (d) 6.1 216.50 276.50 1Z\v 8.0 304.00 402.00 1Z\x (d) 6.5 216.50 279.50 2 (d) 6.2 216.50 279.50 2Z\x (d) 6.4 216.50 279.50 4 x 4 x C\v (d) 8.0 487.50 521.50 1 (d) 7.8 292.00 364.50 1Z\v 9.6 574.00 668.50 1Z\x (d) 10.2 292.00 364.50 2 (d) 11.2 292.00 383.00 2Z\x (d) 11.4 292.00 383.00 3 (d) 11.6 292.00 383.00 5 x 5 x 1 14.0 642.50 791.50 1Z\x 14.3 816.50 884.50 2 14.5 707.50 874.00 2Z\x (d) 15.2 576.50 725.50 3 (d) 16.6 576.50 725.50 4 (d) 16.7 623.50 788.00 6 x 6 x 1 23.0 775.00 951.00 1Z\x 24.0 801.00 1097.00 2 (d) 21.6 686.50 901.50 2Z\x (d) 21.4 686.50 901.50 3 (d) 26.5 686.50 901.50 4 (d) 25.0 686.50 901.50 5 (d) 23.2 686.50 907.50 8 x 8 x 1Z\x 33.0 989.50 1204.50 2 33.5 989.50 1249.50 2Z\x 39.0 989.50 1249.50 3 33.6 1066.00 1274.00 + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. 40

Grooved IPS Pipe Fittings Reducing Tee No. 25 Wgt. Each Run x Branch Painted Galv. 8 x 8 x 4 (d) 41.8 $1430.50 $1848.00 5 34.0 1430.50 1860.50 6 (d) 42.3 1430.50 1868.50 10 x 10 x 1Z\x 62.0 2347.50 3143.50 2 62.0 1659.00 2518.50 2Z\x 62.4 1659.00 2091.50 3 60.0 1659.00 2640.00 4 61.0 1734.50 2217.00 5 52.0 1773.00 2263.00 6 59.0 1773.00 2878.50 8 64.7 1805.50 2892.50 12 x 12 x 1 77.0 2233.50 + 2 80.0 3357.50 4058.50 2Z\x 78.0 2233.50 + 3 82.0 2233.50 2883.00 4 80.0 2393.00 3366.00 5 75.0 2530.00 3286.00 6 75.0 2560.50 3756.00 8 80.0 2631.50 3979.50 10 84.0 2754.50 4283.00 + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. Section 1 Grooved IPS Pipe Fittings 41

No. W25 AGS Grooved Reducing Tee Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings AGS Reducing Tee Refer to publication 20.05 VICTAULIC No.W25 AGS Reducing Tee * AGS Reducing Tee No. W25 Wgt. Each Run x Branch Painted Galv. 14 x 14 x 6 142.0 $1809.00 $2320.00 8 143.0 1853.00 2358.50 No. W25 10 144.0 1960.00 2498.50 12 147.0 2097.50 2686.50 16 x 16 x 6 176.0 2236.00 2890.00 8 185.0 2356.00 2986.00 10 195.0 2545.50 3225.00 12 204.0 2596.50 3298.50 14 210.0 3040.50 3781.00 18 x 18 x 8 231.0 3002.00 3971.00 10 244.0 3115.50 4012.50 12 254.0 3115.50 4051.50 14 262.0 3605.00 4635.00 16 269.0 3934.50 4969.50 20 x 20 x 8 282.0 3929.50 5217.50 10 295.0 3982.50 5278.50 12 308.0 4455.50 5689.50 14 316.0 4799.00 6109.00 16 329.0 5148.00 6525.50 18 342.0 5661.00 7157.50 24 x 24 x 8 381.0 5963.50 8641.00 10 394.0 6257.50 7864.50 12 409.0 6433.50 9051.00 14 419.0 7176.50 9838.50 16 433.0 7337.50 10059.50 18 453.0 7473.50 10266.50 20 473.0 8113.50 11896.50 26 x 26 x 14 536.0 + + 16 545.0 + + 18 562.0 + + 20 582.0 + + 22 600.0 + + 24 617.0 + + 28 x 28 x 14 605.0 + + 16 624.0 + + 18 644.0 + + 20 665.0 + + 22 685.0 + + 24 705.0 + + 26 717.0 + + 30 x 30 x 14 689.0 + + 16 707.0 + + 18 728.0 + + 20 750.0 + + 22 774.0 + + 24 796.0 + + 26 820.0 + + 28 838.0 + + + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. * Victaulic fittings listed are made of segmentally welded steel. 42

Grooved IPS Pipe Fittings AGS Reducing Tee Refer to publication 20.05 VICTAULIC No.W25 AGS Reducing Tee * AGS Reducing Tee No. W25 Run x Branch Wgt. Each Painted Galv. 32 x 32 x 16 1183.0 + + 18 1209.0 + + No. W25 20 1239.0 + + 22 1272.0 + + 24 1303.0 + + 26 1334.0 + + 28 1358.0 + + 30 1385.0 + + 36 x 36 x 18 1360.0 + + 20 1369.0 + + 22 1371.0 + + 24 1418.0 + + 26 1442.0 + + 28 1477.0 + + 30 1510.0 + + 32 1543.0 + + 38 x 38 x 18 1262.0 + + 20 1278.0 + + 22 1292.0 + + 24 1314.0 + + 26 1340.0 + + 28 1367.0 + + 30 1393.0 + + 32 1420.0 + + 36 1473.0 + + 40 x 40 x 20 1475.0 + + 22 1505.0 + + 24 1543.0 + + 26 1594.0 + + 28 1631.0 + + 30 1682.0 + + 32 1768.0 + + 36 1852.0 + + 38 1929.0 + + 42 x 42 x 20 1875.0 + + 22 1940.0 + + 24 2017.0 + + 26 2105.0 + + 28 2105.0 + + 30 2202.0 + + 32 2202.0 + + 36 2304.0 + + 38 1375.0 + + 40 1761.0 + + Section 1 Grooved IPS Pipe Fittings + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. * Victaulic fittings listed are made of segmentally welded steel. 43

Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings AGS Reducing Tee Refer to publication 20.05 VICTAULIC No.W25 AGS Reducing Tee * AGS Reducing Tee No. W25 Run x Branch Wgt. Each Painted Galv. 46 x 46 x 22 1843.0 + + 24 1865.0 + + No. W25 26 1880.0 + + 28 1900.0 + + 30 1927.0 + + 32 1953.0 + + 36 2006.0 + + 38 2033.0 + + 40 2059.0 + + 42 2086.0 + + 48 x 48 x 24 2503.0 + + 26 2525.0 + + 28 2540.0 + + 30 2579.0 + + 32 2579.0 + + 36 2652.0 + + 38 2729.0 + + 40 2804.0 + + 42 2804.0 + + 46 2881.0 + + 54 x 54 x 26 2805.0 + + 28 2805.0 + + 30 2821.0 + + 32 2835.0 + + 36 2853.0 + + 38 2879.0 + + 40 2906.0 + + 42 2932.0 + + 46 2985.0 + + 48 3012.0 + + 56 x 56 x 28 3059.0 + + 30 3075.0 + + 32 3087.0 + + 36 3111.0 + + 38 3137.0 + + 40 3164.0 + + 42 3190.0 + + 46 3243.0 + + 48 3269.0 + + 54 3349.0 + + 60 x 60 x 30 3269.0 + + 32 3380.0 + + 36 3345.0 + + 38 3386.0 + + 40 3420.0 + + 42 3459.0 + + 46 3512.0 + + 48 3538.0 + + 54 3618.0 + + 56 3644.0 + + + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. * Victaulic fittings listed are made of segmentally welded steel. 44

No. 29T Threaded Reducing Tee Grooved IPS Pipe Fittings Reducing Tee with Threaded Branch Refer to publication 07.01 No. 29T Reducing Tee with Threaded Branch * Reducing Tee No. 29T with Threaded Branch Run x Branch Wgt. Each Painted Galv. 2 x 2 x C\v (d) 2.5 $284.50 $334.00 1 (d) 2.7 259.00 304.00 1Z\v 2.9 436.00 466.00 1Z\x (d) 3.0 259.00 308.00 2Z\x x 2Z\x x C\v 3.5 509.00 525.00 1 (d) 3.8 259.00 304.00 1Z\v 3.8 566.00 582.00 1Z\x (d) 3.9 259.00 308.00 2 4.5 259.00 310.50 3 x 3 x C\v 5.9 475.50 504.50 1 (d) 6.1 259.00 324.00 1Z\v 6.3 639.00 679.50 1Z\x (d) 6.5 259.00 326.00 2 (d) 6.2 259.00 326.00 2Z\x (d) 6.4 624.50 676.00 4 x 4 x C\v 7.2 689.50 849.00 1 (d) 7.8 324.00 399.00 1Z\v 8.5 665.50 717.00 1Z\x (d) 9.2 324.00 406.00 2 (d) 11.2 324.00 406.00 2Z\x (d) 11.4 324.00 417.50 3 (d) 11.6 324.00 419.00 5 x 5 x 2 14.5 693.00 755.00 2Z\x (d) 15.2 623.00 789.00 3 16.6 576.50 725.50 4 16.7 623.00 849.00 6 x 6 x 1 23.0 945.50 1099.00 1Z\x 25.0 836.50 1052.00 2 (d) 21.6 808.50 1007.00 2Z\x (d) 21.4 808.50 1007.00 3 (d) 26.5 808.50 1007.00 4 (d) 25.0 1022.00 1099.00 5 23.2 808.50 1007.00 8 x 8 x 2 33.5 989.50 1365.00 3 33.6 1365.00 1770.00 4 (d) 41.8 1430.50 1848.00 5 34.0 1430.50 1859.50 6 (d) 42.3 1582.00 2173.50 10 x 10 x 2 62.0 1658.50 2423.00 3 60.0 1658.50 2057.50 4 61.0 1734.50 2217.00 5 52.0 1525.00 2263.00 6 59.0 1773.00 2293.00 8 64.7 2391.50 2673.00 12 x 12 x 3 80.0 2233.50 2883.50 4 82.0 2393.00 3073.50 5 75.0 2530.00 3286.00 6 75.0 2560.50 3316.50 8 80.0 2632.00 3393.50 10 84.0 2754.50 3398.50 Section 1 Grooved IPS Pipe Fittings (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. 45

No. 50 Concentrc Reducers, No. 51 Eccentric Reducers Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings Reducers Refer to publication 07.01 No. 50 No. 51 Reducers Concentric or Eccentric Concentric Reducer No. 50 Eccentric Reducer No. 51 Wgt. Ea. Wgt. Ea. Painted Galv. Painted Galv. 1Z\v x C\v 1.9 $337.50 $369.50 3.2 + + 1 1.9 353.00 388.50 3.2 + + 1Z\x x C\v 1.4 397.50 429.50 4.5 + + 1 0.8 (d) 88.00 103.00 4.5 $372.50 $436.00 1Z\v 1.0 (d) 88.00 103.00 4.5 364.00 + 2 x C\v 0.9 (d) 88.00 103.00 2.0 410.50 + 1 0.7 (d) 88.00 103.00 2.3 410.50 460.50 1Z\v 1.2 (d) 95.50 112.50 4.6 448.50 + 1Z\x 1.0 (d) 88.00 103.00 4.6 91.50 108.50 2Z\x x C\v 1.3 692.00 746.00 3.3 1039.00 1171.00 1 3.3 119.00 137.50 3.5 967.50 1071.50 1Z\v 3.3 (d) 88.00 103.00 3.5 97.50 113.00 1Z\x 3.6 (d) 88.00 103.00 3.7 447.50 511.50 2 3.9 (d) 88.00 103.00 4.3 (d) 183.00 248.50 3 x C\v 1.5 695.50 778.00 4.8 + + 1 1.3 (d) 95.50 117.00 4.8 1038.50 1142.50 1Z\v 3.0 153.50 177.00 4.8 940.00 + 1Z\x 5.1 (d) 105.50 128.50 5.1 516.50 604.00 2 1.6 (d) 77.50 94.50 6.0 (d) 208.50 285.00 2Z\x 1.6 (d) 105.50 127.50 7.0 (d) 208.50 292.00 3Z\x x 3 2.0 (d) 112.00 135.50 7.0 1140.50 + 4 x 1 2.4 (d) 116.50 142.50 6.5 2102.00 + 1Z\v 4.6 889.50 996.50 1Z\x 6.9 (d) 160.50 212.00 8.1 1271.50 1373.00 2 2.4 (d) 103.00 126.50 8.0 (d) 254.50 355.00 2Z\x 2.7 (d) 127.50 155.00 7.6 (d) 254.50 355.00 3 2.5 (d) 127.50 155.00 7.8 (d) 254.50 355.00 3Z\x 2.9 (d) 127.50 155.00 8.0 1779.50 + 5 x 2 9.0 1251.50 1382.00 5.2 1402.00 + 2Z\x 11.0 259.00 316.00 10.8 1195.00 + 3 4.9 (d) 147.50 183.00 11.1 1155.00 1287.00 4 4.3 (d) 176.00 220.00 12.0 (d) 346.00 487.50 6 x 1 5.0 (d) 233.00 290.50 14.5 2177.00 2364.00 1Z\x 5.5 + + + + + 2 6.6 (d) 233.00 290.50 14.5 1986.00 2162.50 2Z\x 14.2 (d) 259.00 318.50 14.2 2364.00 2574.00 3 6.4 (d) 233.00 290.50 15.0 (d) 459.00 644.00 4 6.5 (d) 204.00 263.50 17.0 (d) 402.50 591.00 5 6.4 (d) 300.50 373.00 17.0 (d) 482.50 684.00 8 x 3 9.3 (d) 415.00 516.50 22.0 2306.50 2512.00 4 10.4 (d) 415.00 519.50 23.0 2017.00 2301.00 5 11.6 (d) 415.00 523.00 23.0 2017.00 2301.00 6 11.9 (d) 526.50 659.50 24.0 (d) 812.00 1105.50 10 x 4 19.7 (d) 945.00 1163.50 32.0 3561.00 4270.50 5 36.3 2079.50 2372.50 34.0 3354.00 3947.50 6 20.0 (d) 1033.50 1288.50 36.9 2530.00 2999.00 8 22.1 (d) 1033.50 1310.50 40.3 2142.00 2663.50 12 x 4 44.0 4524.50 5385.00 48.0 3740.00 + 6 24.6 (d) 1232.50 1523.50 50.0 3379.50 4070.00 8 52.0 (d) 1849.00 2183.50 53.5 3293.50 3941.00 10 38.0 (d) 1849.00 2289.00 57.0 2949.00 3497.00 + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. 46

No. W50 AGS Concentric Reducers, No. W51 AGS Eccentric Reducers Grooved IPS Pipe Fittings AGS Reducers Refer to publication 20.05 VICTAULIC No.W50 No. W50 VICTAULIC No.W51 No. W51 AGS Reducers Concentric or Eccentric AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51 Wgt. Ea. Wgt. Ea. Painted Galv. Painted Galv. 14 x 6 56.0 $4761.00 $5160.50 60.0 $5814.00 $6919.50 8 58.6 2698.50 2985.50 60.0 4402.50 5023.50 10 * 60.4 2358.50 2631.50 60.4 4027.00 4404.00 12 * 63.4 2581.50 2911.00 63.4 3911.00 4278.00 16 x 8 71.6 3865.50 4215.00 73.0 6421.50 + 10 73.8 3714.00 4215.00 73.0 5933.00 + 12 * 75.6 3764.00 4239.00 75.6 5835.50 6382.50 14 * 77.5 3764.00 4291.00 77.5 5711.50 6907.00 18 x 10 85.0 5154.50 6670.50 91.0 8070.00 + 12 88.1 5293.00 6909.00 91.0 7578.00 8714.50 14 * 90.9 4285.50 5399.50 90.9 6885.50 8327.00 16 * 94.0 4285.50 5399.50 94.0 6885.50 8688.50 20 x 12 130.0 5767.00 6989.50 130.0 7866.00 + 14 134.0 5790.50 7003.00 134.0 8082.50 + 16 * 138.0 4660.50 5743.00 138.0 7805.00 9439.50 18 * 142.0 4486.50 7689.00 142.0 7805.00 9850.00 24 x 10 145.0 + + + + 12 150.0 + + + + 14 161.0 + + 148.0 13118.50 + 16 159.0 11068.00 16037.00 159.0 13118.50 + 18 * 163.0 10590.00 12783.00 163.0 12373.50 14588.00 20 * 167.0 8521.50 10725.50 167.0 12521.00 15463.50 26 x 14 167.0 + + 159.0 + + 16 173.0 + + 167.0 + + 18 179.0 + + 175.0 + + 20 185.0 + + 183.0 + + 22 192.0 + + 191.0 + + 24 199.0 + + 199.0 + + 28 x 14 180.0 + + 167.0 + + 16 185.0 + + 175.0 + + 18 190.0 + + 183.0 + + 20 196.0 + + 191.0 + + 22 202.0 + + 199.0 + + 24 208.0 + + 207.0 + + 26 216.0 + + 215.0 + + 30 x 14 192.0 + + 175.0 + + 16 197.0 + + 183.0 + + 18 202.0 + + 191.0 + + 20 207.0 + + 199.0 + + 22 213.0 + + 207.0 + + 24 218.0 + + 215.0 + + 26 225.0 + + 223.0 + + 28 232.0 + + 232.0 + + Section 1 Grooved IPS Pipe Fittings + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. * Single and double reduction concentric and eccentric reducers 14-24 are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements. 47

Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings AGS Reducers Refer to publication 20.05 VICTAULIC No.W50 No. W50 VICTAULIC No.W51 No. W51 AGS Reducers Concentric or Eccentric AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51 Wgt. Ea. Wgt. Ea. Painted Galv. Painted Galv. 32 x 16 320.0 + + 282.0 + + 18 325.0 + + 292.0 + + 20 330.0 + + 303.0 + + 22 336.0 + + 314.0 + + 24 342.0 + + 324.0 + + 26 348.0 + + 335.0 + + 28 355.0 + + 346.0 + + 30 363.0 + + 356.0 + + 40 x 20 365.0 + + 316.0 + + 22 369.0 + + 326.0 + + 24 373.0 + + 337.0 + + 26 377.0 + + 346.0 + + 28 382.0 + + 357.0 + + 30 387.0 + + 367.0 + + 32 393.0 + + 378.0 + + 36 407.0 + + 399.0 + + 42 x 20 386.0 + + 327.0 + + 22 390.0 + + 337.0 + + 24 393.0 + + 348.0 + + 26 397.0 + + 359.0 + + 28 401.0 + + 369.0 + + 30 405.0 + + 378.0 + + 32 409.0 + + 389.0 + + 36 421.0 + + 410.0 + + 40 438.0 + + 432.0 + + 46 x 22 479.0 + + 419.0 + + 24 485.0 + + 431.0 + + 26 490.0 + + 444.0 + + 28 496.0 + + 456.0 + + 30 502.0 + + 469.0 + + 32 508.0 + + 481.0 + + 36 523.0 + + 504.0 + + 38 531.0 + + 516.0 + + 40 540.0 + + 529.0 + + 42 550.0 + + 542.0 + + + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. * Single and double reduction concentric and eccentric reducers 14-24 are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements. 48

Grooved IPS Pipe Fittings AGS Reducers Refer to publication 20.05 VICTAULIC No.W50 No. W50 VICTAULIC No.W51 No. W51 AGS Reducers Concentric or Eccentric AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51 Wgt. Ea. Wgt. Ea. Painted Galv. Painted Galv. 48 x 24 507.0 + + 444.0 + + 26 513.0 + + 456.0 + + 28 518.0 + + 467.0 + + 30 523.0 + + 481.0 + + 32 529.0 + + 494.0 + + 36 541.0 + + 516.0 + + 38 548.0 + + 529.0 + + 40 557.0 + + 542.0 + + 42 565.0 + + 554.0 + + 46 586.0 + + 579.0 + + 54 x 28 1015.0 + + 974.0 + + 30 1035.0 + + 998.0 + + 32 1054.0 + + 1022.0 + + 36 1095.0 + + 1070.0 + + 38 1116.0 + + 1095.0 + + 40 1138.0 + + 1119.0 + + 42 1158.0 + + 1143.0 + + 46 1202.0 + + 1191.0 + + 48 1224.0 + + 1215.0 + + 56 x 28 1081.0 + + 1035.0 + + 30 1101.0 + + 1060.0 + + 32 1122.0 + + 1085.0 + + 36 1164.0 + + 1135.0 + + 38 1185.0 + + 1160.0 + + 40 1207.0 + + 1186.0 + + 42 1228.0 + + 1211.0 + + 46 1273.0 + + 1261.0 + + 48 1296.0 + + 1286.0 + + 54 1368.0 + + 1361.0 + + 60 x 30 1241.0 + + 1190.0 + + 32 1263.0 + + 1217.0 + + 36 1307.0 + + 1270.0 + + 38 1330.0 + + 1297.0 + + 40 1353.0 + + 1324.0 + + 42 1376.0 + + 1351.0 + + 46 1423.0 + + 1404.0 + + 48 1447.0 + + 1431.0 + + 54 1521.0 + + 1512.0 + + 56 1547.0 + + 1538.0 + + + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. * Single and double reduction concentric and eccentric reducers 14-24 are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements. Section 1 Grooved IPS Pipe Fittings 49

No.(s) 53, 54 and 55 Swaged Nipples Grooved IPS Pipe Fittings Swaged Nipples Refer to publication 07.01 No. 53 Grooved x Grooved No. 54 Grooved x Threaded No. 55 Threaded x Grooved Swaged Nipples Steel Swaged Nipples Nominal Wgt. Ea. No. 53, 54, 55 Plated 2 x 1 2.0 $325.50 1Z\v 2.0 325.50 1Z\x 2.0 325.50 2Z\x x 1 3.0 700.50 1Z\v 3.0 700.50 1Z\x 3.0 700.50 2 3.0 622.50 3 x 1 4.5 781.00 1Z\v 4.5 781.00 1Z\x 4.5 781.00 2 4.5 656.00 2Z\x 4.6 656.00 3Z\x x 3 6.8 1500.00 4 x 1 7.5 1110.00 1Z\v 7.5 1110.00 1Z\x 7.5 851.00 2 7.5 851.00 Steel Swaged Nipples Nominal Wgt. Ea. No. 53, 54, 55 Plated 4 x 2Z\x 7.5 $975.00 3 7.5 975.00 3Z\x 7.5 1255.00 5 x 2 11.5 1380.00 3 11.5 1380.00 4 11.5 1380.00 6 x 1 17.0 2752.00 1Z\v 17.0 2752.00 1Z\x 17.2 2752.00 2 17.4 2251.00 2Z\x 17.4 2251.00 3 17.4 2251.00 4 17.5 1348.00 5 17.5 1348.00 8 x 6 20.0 2568.00 Section 1 Grooved IPS Pipe Fittings 50

No. 52 Reducer Threaded Small End Grooved IPS Pipe Fittings Reducer Male Threaded Small End Refer to publication 07.01 No. 52 Reducer Male Threaded Small End Nominal Wgt. Ea. Inlet x Outlet Painted Galv. 1Z\x x 1 0.8 $91.50 $112.00 1Z\v 0.8 95.50 112.50 2 x C\v 0.9 91.50 112.00 1 0.7 91.50 112.00 1Z\v 1.2 91.50 112.00 1Z\x 1.0 91.50 112.00 2Z\x x 1 1.0 123.50 142.00 1Z\v 1.2 129.50 159.50 1Z\x 1.3 135.50 159.50 2 1.4 91.50 112.00 3 x C\v (s) 1.2 655.00 697.00 1 1.3 99.50 119.50 1Z\x 1.5 112.00 134.00 2 1.5 112.00 134.00 2Z\x 1.7 135.50 159.50 4 x 1 2.3 128.00 155.00 1Z\x (s) 2.5 299.50 391.50 2 2.6 136.50 163.00 2Z\x 2.6 137.00 168.00 3 2.5 167.50 198.00 5 x 4 (s) 4.5 948.50 1032.00 6 x 1 5.5 259.00 318.50 2 5.7 259.00 318.50 2Z\x 5.8 259.00 318.50 3 5.8 259.00 318.50 4 (s) 6.5 1557.50 1725.50 5 (s) 17.5 + + (s) steel. Victaulic fittings are made of ductile iron, except those marked (s) + Quoted on application. Contact Victaulic for pricing and availability. Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. Section 1 Grooved IPS Pipe Fittings 51

No. 30 Lateral No. W30 AGS Lateral Grooved IPS Pipe Fittings Lateral Refer to publication 07.01 No. 30 Lateral Nom. 45 Lateral No. 30 Wgt. Ea. Painted C\v 1.0 + + 1 1.7 + + 1Z\v 2.5 (d) $448.00 + 1Z\x 3.5 + + 2 4.6 (d) 448.00 $548.50 2Z\x 9.0 448.00 548.50 3 11.7 (d) 494.50 623.50 3Z\x 17.8 + + 4 22.2 (d) 761.50 948.50 5 21.8 1112.00 1396.00 6 43.6 1790.50 2150.50 8 72.0 2576.50 3122.50 10 105.0 3500.50 4061.00 12 165.0 4231.50 5362.00 Galv. + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. Section 1 Grooved IPS Pipe Fittings AGS Lateral Refer to publication 20.05 VICTAULIC No.W30 No. W30 AGS Lateral * Nom. AGS 45 Lateral No. W30 Wgt. Ea. Painted Galv. 14 276.0 $4229.50 $5426.50 16 344.2 5283.00 6785.50 18 429.0 5905.50 7676.50 20 500.0 8957.00 11350.00 24 715.0 13917.50 16217.00 NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. * Victaulic fittings listed are made of segmentally welded steel. 52

No. 60 Cap No. W60 AGS Cap Grooved IPS Pipe Fittings Cap Refer to publication 07.01 No. 60 Cap Nom. Cap No. 60 Wgt. Ea. Painted C\v 0.2 $152.50 $165.50 1 0.3 63.50 76.00 1Z\v 0.3 63.50 76.00 1Z\x 0.5 63.50 76.00 2 0.6 63.50 76.00 2Z\x 1.0 63.50 76.00 3 1.4 63.50 76.00 3Z\x 2.5 68.50 89.50 4 2.5 68.50 89.50 5 4.6 159.50 213.50 6 6.0 159.00 213.50 8 13.1 303.50 402.00 10 21.0 615.00 801.00 12 35.6 1005.50 1280.00 Galv. Caps are malleable/ductile iron. NOTE: Caps are available with taps. Contact Victaulic for pricing and availability. All tapped caps are non-cancellable and nonreturnable. AGS Cap Refer to publication 20.05 VICTAULIC No.W60 No. W60 AGS Cap Nom. AGS Cap No. W60 Wgt. Ea. Painted Galv. 14 33.2 $1479.00 $1692.50 16 41.2 1673.50 1998.50 18 54.6 1937.00 2289.00 20 67.5 2200.00 2627.50 24 96.0 2995.50 3464.00 26 144.0 + + 28 166.0 + + 30 187.0 + + 32 209.0 + + 36 253.0 + + 40 391.0 + + 42 420.0 + + 46 532.0 + + 48 613.0 + + 54 785.0 + + 56 875.0 + + 60 977.0 + + Section 1 Grooved IPS Pipe Fittings NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. NOTE: Caps are available with taps. Contact Victaulic for pricing and availability. All tapped caps are non-cancellable and nonreturnable. 53

No. 30R Reducing Lateral Grooved IPS Pipe Fittings Reducing Laterals Refer to publication 07.01 No. 30R Reducing Laterals Nominal Reducing Laterals No. 30R Wgt. Each Painted 3 x 3 x 2 9.8 $388.00 $484.50 2Z\x 9.8 388.00 + 4 x 4 x 2 10.0 761.50 907.50 Galv. 2Z\x 10.0 761.50 939.00 3 18.3 761.50 947.00 5 x 5 x 2 24.0 1112.00 + 3 27.0 1112.00 1379.00 4 26.5 1112.00 1401.00 6 x 6 x 3 37.0 1435.50 1796.00 4 36.5 1435.50 1808.00 5 44.7 1435.50 1828.00 8 x 8 x 4 62.0 2071.00 2629.00 5 75.5 2071.00 2652.50 6 82.0 2071.00 2684.50 10 x 10 x 4 104.8 2266.50 2977.50 5 99.0 + 3176.50 6 105.8 2486.00 3176.50 8 118.0 2532.00 3380.00 12 x 12 x 5 122.0 2938.50 + 6 137.0 2938.50 3931.50 8 147.0 2976.00 4020.50 10 167.0 3015.50 4152.00 Section 1 Grooved IPS Pipe Fittings + Quoted on application. Contact Victaulic for pricing and availability. All No. 30R fittings are segmentally welded steel. 54

No. W30R AGS Reducing Lateral Grooved IPS Pipe Fittings AGS Reducing Laterals Refer to publication 20.05 No. W30R AGS Reducing Laterals Nominal AGS Reducing Lateral No. W30R Wgt. Each Painted 14 x 14 x 4 162.4 $1868.00 $2810.50 Galv. 6 167.6 2005.50 2999.00 8 173.5 2157.00 3392.50 10 181.0 2734.00 3582.50 12 189.2 2775.00 3976.50 16 x 16 x 6 206.7 2907.00 4136.50 8 213.1 3074.00 4947.50 10 221.1 3587.50 4895.50 12 229.9 3739.00 5250.50 14 230.9 3739.00 5250.50 18 x 18 x 6 253.1 3739.00 5250.50 8 259.9 3739.00 5250.50 10 285.0 + + 12 277.6 4155.50 5874.50 14 278.7 4974.50 6469.50 16 284.3 5595.50 7228.00 20 x 20 x 12 330.0 5347.50 7636.50 14 331.2 5512.50 7870.00 16 337.2 6502.50 9038.50 24 x 24 x 16 448.5 12343.00 15894.00 18 515.0 + + 20 461.8 13427.00 16419.50 + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. All No. W30R fittings are segmentally welded steel. Section 1 Grooved IPS Pipe Fittings 55

No. 32 Tee Wye No. 61 Bull Plug Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings Tee Wyes Refer to publication 07.01 No. 32 Bull Plugs Refer to publication 07.01 No. 61 Tee Wyes Nominal Tee Wye No. 32 Wgt. Each Painted 2 x 2 x 2 6.4 $779.50 $928.50 2Z\x x 2Z\x x 2Z\x 11.5 779.50 928.50 3 x 3 x 3 14.3 893.50 1078.50 3Z\x x 3Z\x x 3Z\x 22.9 + + 4 x 4 x 3 23.0 1077.00 1303.00 Galv. 4 26.0 1240.50 1508.50 5 x 5 x 3 29.0 1558.00 1826.50 4 36.7 1796.00 2005.50 5 48.0 2639.00 3223.50 6 x 6 x 3 37.3 1276.50 1647.50 4 46.3 1555.50 1944.00 5 55.0 + + 6 60.5 2366.00 2926.00 8 x 8 x 3 76.0 1520.00 2207.50 4 76.4 1810.50 2495.50 5 85.6 2396.50 3152.50 6 112.0 2613.50 3418.00 8 127.1 3601.00 4566.00 10 x 10 x 3 96.0 2016.00 2795.00 4 97.4 2211.00 3036.00 5 115.1 + 3703.50 6 133.1 2932.50 3890.50 8 156.0 3804.50 4894.50 10 190.0 4969.00 6371.00 12 x 12 x 12 240.0 6851.00 8699.00 + Quoted on application. Contact Victaulic for pricing and availability. All No. 32 fittings are segmentally welded steel. Electroplated Steel Bull Plugs Electroplated Nom. Steel Bull Plug No. 61 Wgt. Ea. 2 2.0 $228.00 2Z\x 3.0 228.00 3 4.5 333.50 4 7.5 429.50 5 12.0 935.50 6 17.0 1008.50 Other sizes available upon request. Contact Victaulic for details. 56

No. 48 Hose Nipples No(s). 41, 45 and 46 Flanged Adapter Nipples Grooved IPS Pipe Fittings Hose Nipples Refer to publication 07.01 No. 48 Steel Hose Nipples Nom. Length Steel Hose Nipple No. 48 End to End Wgt. Ea. Painted C\v 3.25 0.3 $148.50 $177.50 1 3.25 0.4 148.50 + 1Z\v 3.63 0.6 148.50 + 1Z\x 4.00 0.8 148.50 177.50 2 4.63 1.1 148.50 177.50 2Z\x 5.50 2.0 148.50 177.50 3 6.00 3.2 215.00 258.50 4 7.25 4.9 372.50 448.00 5 9.75 8.0 562.50 + 6 10.12 14.3 668.00 + 8 12.50 24.7 1387.50 + 10 14.00 40.1 1363.00 + 12 16.00 62.0 + + Galv. + Quoted on application. Contact Victaulic for pricing and availability. Flanged Adapter Nipples Refer to publication 07.01 No. 41 Nos. 45 & 46 Flanged Adapter Nipples 125 lb, 150 lb, or 300 lb * x Length No. 41 125 lb No. 45 150 lb No. 46 300 lb Black Galv. Black Galv. Black Galv. 1 x 3 + + + + + + 1Z\v x 4 + + + + + + 1Z\x x 4 $368.50 $797.00 $316.50 $498.50 $364.00 + 2 x 4 316.50 472.50 316.50 498.50 388.50 $457.00 2Z\x x 4 395.00 607.00 632.00 744.50 388.50 457.00 3 x 4 508.00 769.00 647.00 769.00 539.00 682.00 3Z\x x 4 + + + + + + 4 x 6 738.00 1153.00 737.50 1075.00 1015.00 1160.50 5 x 6 1201.00 + 1021.00 1414.00 1039.00 + 6 x 6 1297.50 2343.00 1039.00 1433.50 1039.00 1569.00 8 x 6 1852.00 4079.50 1286.00 1914.50 2125.00 2527.00 10 x 8 2932.50 7342.50 1942.50 2912.00 2633.00 + 12 x 8 4793.50 10535.00 2659.50 3839.50 3952.50 6959.50 + Quoted on application. Contact Victaulic for pricing and availability. * Raised face flanges are standard; flat flanges are quoted on application. Section 1 Grooved IPS Pipe Fittings 57

No. W45R AGS Flanged Adapter Nipple 3D Cast Bends for Abrasive Services Grooved IPS Pipe Fittings Section 1 Grooved IPS Pipe Fittings AGS Flanged Adapter Nipple Refer to publication 20.05 No. W45R 3D Cast Bends For abrasive services Refer to publication 07.01 AGS Flanged Adapter Nipples ANSI 150 x Length Wgt. Ea. AGS Flanged Adapter Nipple No. W45RR * Painted 14 x 8 122.0 $3994.00 $4442.50 16 x 8 136.0 4759.50 5525.50 18 x 8 168.0 5269.00 5736.00 20 x 8 208.0 5527.00 5980.50 24 x 8 274.0 5787.00 6226.00 26 x 12 254.0 + + 28 x 12 262.0 + + 30 x 12 270.0 + + 32 x 12 278.0 + + 36 x 12 340.0 + + 40 x 12 361.0 + + 42 x 12 372.0 + + 46 x 12 393.0 + + 48 x 12 404.0 + + 54 x 16 372.0 + + 56 x 16 393.0 + + 60 x 16 404.0 + + NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls. * Raised face flanges are standard; flat flanges are quoted on application. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: For original roll grooved 14 24 fittings please contact your local Victaulic sales representative. 3D Cast Bends 90 Bend or 45 Bend Fitting 90 Bend 45 Bend Wgt. Ea. Center to End Wgt. Ea. Center to End 2 5.0 10.00 $1229.00 4.7 6.50 $1167.00 3 16.0 13.00 1498.00 10.4 7.75 1408.50 4 22.5 16.00 1672.00 17.2 9.00 1549.00 6 70.0 24.00 2205.00 45.0 13.50 1998.00 Galv. 90 3D Cast Bend 45 3D Cast Bend 58

Long Radius Bend 3D Grooved IPS Pipe Fittings 3D Long Radius Steel Bends Refer to publication 07.02 No. 100-3D 90 Bend 3D Long Radius Bends 90 Bend, 60 Bend, or 45 Bend Nom. Wgt. Ea. 90 Bend No. 100-3D Wgt. Ea. 60 Bend No. 14-3D Wgt. Ea. 45 Bend No. 110-3D 2 5.3 $1229.00 4.3 $1189.00 3.9 $1167.00 2Z\x 9.5 1313.00 7.7 1245.00 6.7 1234.50 3 14.0 1498.00 11.0 1425.50 9.5 1408.50 4 24.1 1672.00 18.5 1627.00 15.7 1549.00 5 40.9 1879.00 31.3 1823.50 26.5 1718.00 6 63.7 2205.00 48.8 2031.50 41.3 1998.00 8 127.8 2895.00 97.9 2553.00 82.9 2485.50 10 226.4 3674.00 173.4 3237.00 146.9 2917.00 12 332.7 4667.00 254.8 3859.50 215.9 3702.00 14 427.3 5673.50 327.3 4714.50 277.3 4238.00 16 560.1 6879.00 429.0 5736.00 363.5 5167.50 18 710.7 9508.50 544.4 8038.00 461.3 7309.00 20 879.3 11466.00 673.5 9358.50 570.7 8503.50 24 1270.3 16035.50 973.0 13107.50 824.4 11374.50 No. 14-3D 60 Bend No. 110-3D 45 Bend Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic. For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. No. 15-3D 30 Bend No. 12-3D 22Z\x Bend No. 13-3D 11Z\v Bend 3D Long Radius Bends 30 Bend, 22Z\x Bend, or 11Z\v Bend Nom. 30 Bend No. 15-3D Wgt. Ea. 22Z\x Bend No. 12-3D Wgt. Ea. 11Z\v Bend No. 13-3D Wgt. Ea. 2 3.4 $1145.00 3.2 $1134.50 2.8 $1122.00 2Z\x 5.8 1217.50 5.3 1213.00 4.6 1201.00 3 7.3 1392.00 7.3 1380.50 6.2 1369.50 4 12.8 1527.00 11.4 1514.50 9.3 1498.50 5 21.8 1689.50 19.4 1672.00 15.8 1649.50 6 33.9 1863.00 30.1 1846.00 24.6 1818.00 8 68.0 2267.00 60.5 2233.00 49.3 2031.50 10 120.5 2597.50 107.2 2564.00 87.3 2311.50 12 177.0 3293.50 157.5 3215.00 128.3 2850.50 14 227.3 3761.00 202.3 + 164.8 3233.00 16 297.9 4594.00 265.2 4473.00 216.0 3962.00 18 378.1 6568.50 336.5 6023.50 274.1 5386.00 20 467.8 7252.00 416.3 7016.50 339.2 6281.50 24 675.7 9651.50 601.4 9319.00 490.0 8291.00 Section 1 Grooved IPS Pipe Fittings + Quoted on application. Contact Victaulic for pricing and availability. Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic. For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. 59

Long Radius Bends 5D Grooved IPS Pipe Fittings 5D Long Radius Steel Bends Refer to publication 07.02 No. 100-5D 90 Bend 5D Long Radius Bends 90 Bend, 60 Bend, or 45 Bend Nom. Wgt. Ea. 90 Bend No. 100-5D Wgt. Ea. 60 Bend No. 14-5D Wgt. Ea. 45 Bend No. 110-5D 2 7.2 $1319.00 5.6 $1251.50 4.8 $1201.00 2Z\x 13.3 1358.00 10.2 1313.00 8.6 1257.50 3 19.9 1599.00 15.0 1504.00 12.5 1476.00 4 35.4 1801.00 26.0 1672.00 21.3 1639.00 5 60.0 2121.00 44.1 1958.00 36.1 1835.00 6 93.5 2440.50 68.6 2205.00 56.2 2048.00 8 187.6 3377.50 137.7 2816.50 112.8 2693.00 10 332.4 4662.00 244.1 3697.00 199.9 3315.50 12 488.4 5912.00 358.6 4931.00 293.7 4196.00 14 627.4 7413.00 460.7 5966.00 377.3 5110.50 16 822.2 8917.50 603.8 7200.00 494.5 6190.50 18 1043.4 12333.00 766.2 9801.00 627.6 8538.00 20 1290.9 14635.00 947.9 11334.00 776.4 9887.00 24 1864.8 20680.00 1369.3 16208.50 1121.6 13699.50 No. 14-5D 60 Bend No. 110-5D 45 Bend For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. 5D Long Radius Bends 30 Bend, 22Z\x Bend, or 11Z\v Bend Section 1 Grooved IPS Pipe Fittings No. 15-5D 30 Bend No. 12-5D 22Z\x Bend No. 13-5D 11Z\v Bend Nom. 30 Bend No. 15-5D Wgt. Ea. 22Z\x Bend No. 12-5D Wgt. Ea. 11Z\v Bend No. 13-5D Wgt. Ea. 2 4.0 $1167.00 3.6 $1156.50 3.0 $1128.50 2Z\x 7.0 1234.50 6.2 1223.50 5.0 1206.50 3 10.0 1408.50 8.8 1397.50 6.9 1374.50 4 16.6 1605.50 14.3 1532.00 10.7 1504.00 5 28.1 1796.00 24.1 1694.50 18.2 1661.50 6 43.8 1998.00 37.6 1868.50 28.3 1829.00 8 87.9 2434.50 75.4 2244.00 56.8 2188.50 10 155.8 2929.00 133.7 2838.50 100.6 2536.50 12 228.9 3708.00 196.4 3337.50 147.8 2911.50 14 627.0 4525.00 252.3 4100.00 189.8 3589.00 16 385.3 5167.50 330.7 4984.50 248.8 4060.00 18 489.0 7280.50 419.7 6644.00 315.7 5874.00 20 605.0 8434.50 519.2 7711.00 390.6 6425.00 24 873.9 11735.50 750.1 10214.50 564.3 8463.00 For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. 60

Long Radius Bends 6D Grooved IPS Pipe Fittings 6D Long Radius Steel Bends Refer to publication 07.02 No. 100-6D 90 Bend 6D Long Radius Bends 90 Bend, 60 Bend, or 45 Bend Nom. 90 Bend No. 100-6D Wgt. Ea. 60 Bend No. 14-6D Wgt. Ea. 45 Bend No. 110-6D Wgt. Ea. 2 8.2 $1353.00 6.3 $1274.00 5.3 $1217.50 2Z\x 15.2 1414.50 11.4 1330.00 9.5 1302.00 3 22.9 1627.00 17.0 1521.00 14.0 1493.00 4 41.1 1891.50 29.8 1756.50 24.1 1655.00 5 69.6 2166.00 50.5 1986.00 40.9 1857.50 6 108.4 2631.50 78.6 2238.50 63.7 2176.50 8 217.5 3669.00 157.7 3063.50 127.8 2755.00 10 385.4 5065.50 279.4 4027.50 226.4 3612.50 12 566.2 6663.50 410.5 5351.00 332.7 4571.00 14 727.4 8296.50 527.4 6465.50 427.3 5552.50 16 953.3 10271.50 691.1 7786.00 560.1 6706.50 18 1209.7 13601.00 877.1 10891.50 710.1 9175.50 20 1496.6 16076.00 1085.1 12563.00 879.3 11006.50 24 2162.0 23131.00 1567.5 17844.00 1270.3 15197.50 No. 14-6D 60 Bend No. 110-6D 45 Bend + Quoted on application. Contact Victaulic for pricing and availability. For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. No. 15-6D 30 Bend No. 12-6D 22Z\x Bend No. 13-6D 11Z\v Bend 6D Long Radius Bends 30 Bend, 22Z\x Bend, or 11Z\v Bend Nom. 30 Bend No. 15-6D Wgt. Ea. 22Z\x Bend No. 12-6D Wgt. Ea. 11Z\v Bend No. 13-6D Wgt. Ea. 2 4.3 $1178.50 3.9 $1162.50 3.2 $1134.50 2Z\x 7.7 1241.00 6.7 1229.50 5.3 1206.50 3 11.0 1419.50 9.5 1402.50 7.3 1380.50 4 18.5 1616.00 15.7 1543.00 11.4 1509.50 5 31.3 1807.00 26.5 1705.50 19.4 1666.50 6 48.8 2014.00 41.3 1986.00 30.1 1840.50 8 97.9 2458.00 82.9 2418.50 60.5 2199.50 10 173.4 3197.50 146.9 2883.50 107.2 2547.00 12 254.8 3792.50 215.9 3652.00 157.5 3192.00 14 327.3 4634.00 277.3 + 202.3 3629.50 16 429.0 5621.50 363.5 5081.00 265.2 4427.50 18 544.4 7814.50 461.3 7143.00 336.5 5943.00 20 673.5 9054.50 570.7 8274.00 416.3 6902.00 24 973.0 12551.00 824.4 10960.50 601.4 9112.00 Section 1 Grooved IPS Pipe Fittings + Quoted on application. Contact Victaulic for pricing and availability. For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. 61

Extra Heavy ES Fittings Grooved IPS Pipe Fittings Extra Heavy ES Endseal Fittings Elbows and Tees Refer to publication 07.03 No. 62 No. 63 Elbows and Tees 90 Elbow, 45 Elbow, or Tee Nominal Pipe 90 Elbow No. 62 45 Elbow No. 63 Tee No. 64 Actual Painted Painted Painted 2 (d) 2.375 $326.00 $426.00 $543.00 2Z\x 2.875 452.00 426.00 685.00 3 (d) 3.500 326.00 426.00 736.00 4 (d) 4.500 457.00 565.00 840.50 6 6.625 1673.50 909.50 1770.50 + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. For sizes to 12, contact Victaulic. Steel Full Flow Elbows available with longer center to end dimensions. Contact Victaulic for details. No. 64 Section 1 Grooved IPS Pipe Fittings 62

Style 47 Clearflow Dielectric Waterway Style 47-GG IPS to CTS Transition Fitting Grooved IPS Pipe Fittings Clearflow * Dielectric Waterway Carbon Steel (IPS) to Copper (CTS) Transition Fitting Style 47 Refer to publication 09.07 Grooved x Threaded Threaded x Threaded Style 47 Carbon Steel (IPS) to copper (cts) Transition Fitting Grooved x Threaded or Threaded x Threaded PIPE End to End Price Number of Pieces Wgt. per Box Nominal Outside Diameter per Unit per Box Grooved x Threaded 1 1.315 4 $56.50 25 9.0 1Z\v 1.660 4 75.00 10 6.0 1Z\x 1.900 4 88.00 10 8.0 2 2.375 4 89.50 10 10.0 2Z\x 2.875 6 121.00 6 10.0 3 3.500 6 218.00 6 12.0 4 4.500 6 292.00 6 27.0 Threaded x Threaded Z\x 0.657 3 $31.00 25 5.0 C\v 1.050 3 31.00 25 6.0 1 1.315 4 46.00 25 12.0 1Z\v 1.660 4 65.50 10 6.0 1Z\x 1.900 4 78.50 10 8.0 2 2.375 4 89.50 10 10.0 2Z\x 2.875 6 121.00 6 10.0 3 3.500 6 218.00 6 12.0 4 4.500 6 292.00 6 27.0 * ClearFlow is a registered trademark of Perfection Corp. Carbon Steel (IPS) to Copper (CTS) Transition Fitting Style 47-GG Refer to publication 09.12 Style 47-GG Carbon Steel (IPS) to Copper (CTS) Transition Fitting PIPE End to End Price Outside Diameter Steel (IPS) Copper (CTS) Number of Pieces Wgt. per Box Nominal Per Unit per Box 2 2.375 2.125 4.19 $152.00 10 18.0 2Z\x 2.875 2.625 6.19 170.00 6 34.0 3 3.500 3.125 6.19 261.50 6 28.0 4 4.500 4.125 6.19 524.00 6 36.0 5 5.563 5.125 6.19 585.00 1 8.0 6 6.625 6.125 6.19 724.50 1 12.0 8 8.625 8.125 6.19 873.50 1 16.0 Section 1 Grooved IPS Pipe Fittings 2 3 Grooved x Grooved 4 8 Grooved x Grooved 63

64

SECTION 2 Hole Cut Products Hole Cut Products 65

Styles 920/920N Female Threaded Mechanical-T Outlet Hole Cut Products Mechanical-T Outlet Styles 920 and 920N Refer to publication 11.02 Style 920 Female Style 920 Female Threaded Branch Run x Brch. Style Number Wgt. Ea. Complete Mechanical-T Female Threaded Branch Painted Galv. Bolts & Nuts Spare Parts Standard Grade E or T Gaskets 2 x Z\x 920N 3.1 $70.00 $88.50 Z\x x 2C\v $14.50 C\v 920N 3.1 70.00 88.50 Z\x x 2C\v 14.50 1 920N 3.0 70.00 88.50 Z\x x 2C\v 14.50 1Z\v 920N 3.5 81.00 101.00 Z\x x 2C\v 16.50 1Z\x 920N 3.6 81.00 101.00 Z\x x 2C\v 16.50 2Z\x x Z\x 920N 3.0 70.00 88.50 Z\x x 2C\v 14.50 C\v 920N 3.0 70.00 88.50 Z\x x 2C\v 14.50 1 920N 2.9 70.00 88.50 Z\x x 2C\v 14.50 1Z\v 920N 3.5 99.00 120.50 Z\x x 3Z\v 16.50 1Z\x 920N 3.6 99.00 120.50 Z\x x 3 16.50 3 x Z\x 920N 3.4 81.00 99.00 Z\x x 2C\v 14.50 C\v 920N 3.4 81.00 99.00 Z\x x 2C\v 14.50 1 920N 3.3 81.00 99.00 Z\x x 2C\v 14.50 1Z\v 920N 3.8 102.50 128.50 Z\x x 2C\v 16.50 1Z\x 920N 4.1 102.50 128.50 Z\x x 2C\v 16.50 2 920N 4.9 118.00 147.00 Z\x x 3Z\v 16.50 4 x Z\x 920N 3.7 102.00 122.00 Z\x x 2C\v 14.50 C\v 920N 3.7 102.00 122.00 Z\x x 2C\v 14.50 1 920N 3.6 102.00 122.00 Z\x x 2C\v 14.50 1Z\v 920N 4.0 119.50 141.00 Z\x x 2C\v 16.50 1Z\x 920N 4.2 124.50 156.50 Z\x x 2C\v 16.50 2 920N 5.0 124.50 158.00 Z\x x 2C\v 16.50 2Z\x 920 5.8 130.00 168.50 1 x 2C\v 19.00 3 920 8.4 138.50 177.50 1 x 3Z\v 21.00 5 x 1Z\x 920 7.7 152.00 192.50 B\, x 4C\v 16.50 2 920 8.2 152.00 192.50 B\, x 4C\v 16.50 2Z\x 920 8.3 160.50 204.50 B\, x 4C\v 19.00 3 920 8.4 170.50 219.50 B\, x 4C\v 21.00 6 x 1Z\v 920N Z\x x 2C\v 16.50 1Z\x 920N 5.1 156.00 199.50 Z\x x 2C\v 16.50 2 920N 5.6 156.00 199.50 Z\x x 2C\v 16.50 2Z\x 920 7.6 168.00 217.00 B\, x 4C\v 19.00 3 920 8.4 178.00 229.50 B\, x 4C\v 21.00 4 920 10.1 197.50 257.50 B\, x 4C\v 28.00 8 x 2 920 11.6 272.50 344.00 C\v x 4Z\v 20.00 2Z\x 920 11.6 272.50 344.00 C\v x 4Z\v 20.00 3 920 12.6 287.50 364.50 C\v x 4Z\v 21.00 4 920 15.3 296.00 382.50 C\v x 4Z\v 28.00 Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information. Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details. Requires Z\x x 3Z\v bolts when used in cross configuration. Section 2 Hole Cut Products 66

Styles 920/920N Grooved Mechanical-T Outlet Hole Cut Products Mechanical-T Outlet Styles 920/920N Refer to publication 11.02 Style 920 Grooved Style 920 Grooved Branch Run x Brch. Style Number Wgt. Ea. Complete Mechanical-T Grooved Branch Painted Galv. Bolts & Nuts Spare Parts Standard Grade E or T Gaskets 2 x 1 920N $14.50 1Z\v 920N 3.5 $81.00 $101.00 Z\x x 2C\v 16.50 1Z\x 920N 3.2 81.00 101.00 Z\x x 2C\v 16.50 2Z\x x 1 920N 14.50 1Z\v 920N 3.2 99.00 120.50 Z\x x 3Z\v 16.50 1Z\x 920N 3.3 99.00 120.50 Z\x x 3 16.50 3 x 1 920N 14.50 1Z\v 920N 3.7 102.50 128.50 Z\x x 2C\v 16.50 1Z\x 920N 3.8 102.50 128.50 Z\x x 2C\v 16.50 2 920N 4.6 118.00 147.00 Z\x x 3Z\v 16.50 3Z\x x 2 920N 5.0 460.50 575.00 Z\x x 2C\v 16.50 4 x 1 920N 14.50 1Z\v 920N 3.6 119.50 141.00 Z\x x 2C\v 16.50 1Z\x 920N 3.9 124.50 156.50 Z\x x 2C\v 16.50 2 920N 4.6 124.50 158.00 Z\x x 2C\v 16.50 2Z\x 920 5.0 130.00 168.50 Z\x x 2C\v 19.00 3 920 6.4 138.50 177.50 Z\x x 3Z\v 21.00 5 x 1Z\x 920 7.6 152.00 + B\, x 4C\v 16.50 2 920 8.0 152.00 192.50 B\, x 4C\v 16.50 2Z\x 920 7.9 160.50 + B\, x 4C\v 19.00 3 920 8.8 170.50 219.50 B\, x 4C\v 21.00 6 x 1Z\v 920N 4.8 156.00 199.50 Z\x x 2C\v 16.50 1Z\x 920N 5.1 156.00 199.50 Z\x x 2C\v 16.50 2 920N 5.6 156.00 199.50 Z\x x 2C\v 16.50 2Z\x 920 8.3 170.50 217.00 B\, x 4C\v 19.00 3 920 9.9 178.00 229.50 B\, x 4C\v 21.00 4 920 10.1 197.50 257.50 B\, x 4C\v 28.00 8 x 2 920 11.4 272.50 + C\v x 4Z\v + 2Z\x 920 11.6 272.50 344.00 C\v x 4Z\v 20.00 3 920 11.6 287.50 364.50 C\v x 4Z\v 21.00 4 920 12.5 296.00 382.50 C\v x 4Z\v 28.00 Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information. + Quoted on application. Contact Victaulic for pricing and availability. Requires Z\x x 3Z\v bolts when used in cross configuration. Section 2 Hole Cut Products 67

Vic-Tap II Hot Tap Hole Cut Products Vic-Tap II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi. Part A Includes drill guide base with extended shaft, arbor, pilot drill, 2C\, hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II. Part B Includes drill motor with ground fault interrupt and clip-on feed wheel assembly. Part C Vic-Tap II with 2Z\x full port ball valve factory mounted. Available in sizes 4 x 2Z\x, 5 x 2Z\x, 6 x 2Z\x, and 8 x 2Z\x. Available for purchase only (parts not sold separately). * Parts A & B can be purchased separately. Tool Model Part Number Shipping Weight Rental Per Month List Price Vic-Tap II - Parts A and B only R-000-902-VT2 70 $3838.50 $8470.00 Part A only R-100-902-VT2 5777.50 Part B only R-300-901-VT1 5787.50 Part C 4 x 2Z\x / 114.3 x 73.0 mm R-016-931-010 1697.50 5 x 2Z\x / 141.3 x 73.0 mm R-020-931-010 1697.50 6 x 2Z\x / 168.3 x 73.0 mm R-024-931-010 1697.50 8 x 2Z\x / 219.1 x 73.0 mm R-032-931-010 1773.00 NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $605.50. Part. No. N-E15-000-004. Section 2 Hole Cut Products 68

Styles 920/920N Mechanical-T Cross Hole Cut Products Mechanical-T Cross Style 920/920N * Refer to publication 11.03 The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order. Styles 920/920N Mechanical-T Cross Nominal Run x Branch A Style COMPLETE MECHANICAL-T CROSS with E or T Gasket B Number Painted Galv. 2 x 2 x Z\x x Z\x 920N $111.00 $142.00 Z\x x C\v 920N 127.00 163.00 Z\x x 1 920N 111.00 142.00 Z\x x 1Z\v 920N 127.00 163.00 Z\x x 1Z\x 920N 127.00 163.00 C\v x C\v 920N 111.00 163.00 C\v x 1 920N 111.00 142.00 C\v x 1Z\v 920N 127.00 163.00 C\v x 1Z\x 920N 127.00 163.00 1 x 1 920N 111.00 142.00 1 x 1Z\v 920N 127.00 163.00 1 x 1Z\x 920N 127.00 163.00 1Z\v x 1Z\v 920N 127.00 163.00 1Z\x x 1Z\v 920N 127.00 163.00 1Z\x x 1Z\x 920N 127.00 163.00 2Z\x x 2Z\x x Z\x x Z\x 920N 111.00 142.00 Z\x x C\v 920N 111.00 142.00 Z\x x 1 920N 111.00 142.00 Z\x x 1Z\v 920N 152.50 197.00 Z\x x 1Z\x 920N 152.50 210.50 C\v x C\v 920N 111.00 142.00 C\v x 1 920N 111.00 142.00 C\v x 1Z\v 920N 152.50 197.00 C\v x 1Z\x 920N 152.50 210.50 1 x 1 920N 111.00 142.00 1 x 1Z\v 920N 152.50 197.00 1 x 1Z\x 920N 152.50 197.00 1Z\v x 1Z\v 920N 152.50 197.00 1Z\x x 1Z\v 920N 152.50 197.00 1Z\x x 1Z\x 920N 152.50 163.00 3 x 3 x Z\x x Z\x 920N 124.50 160.50 Z\x x C\v 920N 124.50 160.50 Z\x x 1 920N 152.50 190.50 Z\x x 1Z\v 920N 152.50 190.50 Z\x x 1Z\x 920N 152.50 190.50 Z\x x 2 920N 176.50 218.50 * Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details. Requires Z\x x 3Z\v bolts when used in cross configuration. Section 2 Hole Cut Products 69

Hole Cut Products Nominal Run x Branch A B Style COMPLETE MECHANICAL-T CROSS with E or T Gasket Number Painted Galv. 3 x 3 x C\v x C\v 920N $124.50 $160.50 C\v x 1 920N 152.50 190.50 C\v x 1Z\v 920N 152.50 190.50 C\v x 1Z\x 920N 152.50 190.50 C\v x 2 920N 176.50 218.50 1 x 1 920N 124.50 160.50 1 x 1Z\v 920N 152.50 152.50 1 x 1Z\x 920N 152.50 190.50 1 x 2 920N 176.50 218.50 1Z\v x 1Z\v 920N 152.50 190.50 1Z\x x 1Z\v 920N 152.50 190.50 1Z\x x 1Z\x 920N 152.50 190.50 2 x 1Z\v 920N 176.50 198.50 2 x 1Z\x 920N 176.50 218.50 2 x 2 920N 176.50 218.50 4 x 4 x Z\x x Z\x 920N 152.50 198.00 Z\x x C\v 920N 152.50 198.00 Z\x x 1 920N 152.50 198.00 Z\x x 1Z\v 920N 185.00 232.50 Z\x x 1Z\x 920N 185.00 232.50 Z\x x 2 920N 198.00 234.00 C\v x C\v 920N 152.50 198.00 C\v x 1 920N 152.50 198.00 C\v x 1Z\v 920N 185.00 232.50 C\v x 1Z\x 920N 185.00 232.50 C\v x 2 920N 198.00 234.00 1 x 1 920N 152.50 198.00 1 x 1Z\v 920N 169.50 234.00 1 x 1Z\x 920N 198.00 232.50 1 x 2 920N 198.00 234.00 1Z\v x 1Z\v 920N 185.00 232.50 1Z\x x 1Z\v 920N 185.00 232.50 1Z\x x 1Z\x 920N 185.00 232.50 2 x 1Z\v 920N 198.00 234.00 2 x 1Z\x 920N 198.00 234.00 2 x 2 920N 198.00 234.00 2Z\x x 2Z\x 920 198.00 252.00 3 x 2Z\x 920 206.50 267.00 3 x 3 920 206.50 267.00 * Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details. Requires Z\x x 3Z\v bolts when used in cross configuration. Section 2 Hole Cut Products 70

Hole Cut Products Nominal Run x Branch A B Style COMPLETE MECHANICAL-T CROSS with E or T Gasket Number Painted Galv. 5 x 5 x 1Z\x x 1Z\x 920 $226.50 $287.50 2 x 1Z\x 920 238.50 287.50 2 x 2 920 226.50 287.50 2Z\x x 1Z\x 920 238.50 304.50 2Z\x x 2 920 238.50 304.50 2Z\x x 2Z\x 920 238.50 304.50 3 x 1Z\x 920 255.50 328.00 3 x 2 920 255.50 328.00 3 x 2Z\x 920 255.50 328.00 3 x 3 920 255.50 328.00 6 x 6 x 1Z\v x 1Z\v 920N 232.00 298.50 1Z\x x 1Z\v 920N 232.00 298.50 1Z\x x 1Z\x 920N 232.00 298.50 2 x 1Z\x 920N 232.00 298.50 2 x 2 920N 242.00 322.50 2Z\x x 2Z\x 920 249.00 322.50 3 x 2Z\x 920 266.00 341.50 3 x 3 920 266.00 341.50 4 x 2Z\x 920 294.50 382.50 4 x 3 920 294.50 382.50 4 x 4 920 294.50 382.50 8 x 8 x 2 x 2 920 407.50 514.50 2Z\x x 2 920 407.50 514.50 2Z\x x 2Z\x 920 407.50 514.50 3 x 2Z\x 920 429.00 545.50 3 x 3 920 429.00 545.50 4 x 2Z\x 920 443.50 573.00 4 x 3 920 443.50 573.00 4 x 4 920 443.50 573.00 * Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. Available grooved only. Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details. Requires Z\x x 3Z\v bolts when used in cross configuration. Section 2 Hole Cut Products 71

Style 923 Vic-Let Strapless Outlet Style 924 Vic-O-Well One Nut Thermometer Well Hole Cut Products Vic-Let Strapless Outlet Style 923 Refer to publication 11.05 Vic-Let Strapless Outlet With Grade E Gasket Nominal Wgt. Per Unit VIC-LET COMPLETE With E or T Gasket * Price Per Unit 4 8 x Z\x NPT IPS 2.28 $173.50 4 8 x C\v NPT IPS 2.28 185.50 10 and larger x Z\x NPT IPS 2.16 173.50 10 and larger x C\v NPT IPS 2.16 185.50 * Available with Grade T Gasket. Contact Victaulic for details. 4 8 10 Up Vic-O-Well Thermometer Outlet Style 924 Refer to publication 11.06 Vic-O-Well Thermometer Outlet With Grade E Gasket Nominal Wgt. Per Unit VIC-O-WELL COMPLETE * With E Gasket Price Per Unit 4 8 for 6 Stem # 3.78 $261.50 10 Flat for 6 Stem # 3.78 261.50 * Available with Grade T Gasket. Contact Victaulic for details. # Vic-O-Well is internally threaded to 1Z\v - 18 NEF 2B. 4 8 Section 2 Hole Cut Products 10 up 72

SECTION 3 Valves and Specialties Valves and Specialties 73

Series 761 Vic-300 MasterSeal Butterfly Valve Grooved IPS Pipe Valves Grooved IPS Valves Section 3 Grooved IPS Valves Vic-300 MasterSeal Butterfly Valve Series 761 Gear Operator 10-Position Handle with Memory Stop Ordering Information Product, body material and disc/stem are standard as listed below. Please specify size, seat, and operator when ordering. Please see the next page for numbering chart information. For power actuation, contact Victaulic for your nearest authorized valve actuation center. Refer to publication 08.20. Bare Valves (Ductile Iron Electroless Nickel Coated Disc) 2 (020) 2Z\x (024) 3 (030) V - XXX - 76-1 - S - E - 0 $463.00 $604.00 $637.50 $791.50 $1526.50 $1598.50 $2128.50 $3009.50 $3412.50 PRICE OF VALVE COMPLETE WITH OPERATOR DUCTILE IRON 10-POSITION OPERATOR E or T Seat 10-Position Handle with Memory Stop $612.50 $754.50 $787.50 $940.00 $1675.50 $1769.50 $2301.00 $3778.00 $4179.50 10-Position Handle with Memory Stop O 875.50 1014.50 1125.50 1255.50 2408.50 2467.50 3170.50 POA POA 10-Position - Tamper Proof with E or T Seat 705.00 847.50 879.50 1033.50 1768.50 1862.00 2392.50 N/A N/A STAINLESS STEEL TRIM 10-POSITION OPERATOR E or T Seat 10-Position Handle with Memory Stop $1062.50 $1109.50 $1196.50 $1436.50 $2894.00 $3094.00 $4583.50 $7655.00 $8787.00 10-Position Handle with Memory Stop O 1304.00 1483.50 1941.50 2172.00 4063.00 4349.50 5117.50 POA POA 10-Position - Tamper Proof with E or T Seat 1270.00 1338.50 1366.00 1456.00 2640.50 2866.50 4753.00 N/A N/A ALUMINUM BRONZE TRIM 10-POSITION OPERATOR E or T Seat 10-Position Handle with Memory Stop $889.50 $1028.00 $1278.00 $1338.50 $2441.00 $2889.00 N/A N/A N/A 10-Position Handle with Memory Stop O POA POA POA POA POA POA N/A N/A N/A 10-Position - Tamper Proof with E or T Seat POA POA POA POA POA POA N/A N/A N/A 4 (040) 5 (050) N/A - Not available. POA - Priced on application. 6 (060) 8 (080) 10 (100) 12 (120) 74

Grooved IPS Pipe Valves Bare Valves (Ductile Iron Electroless Nickel Coated Disc) 2 (020) 2Z\x (024) 3 (030) 4 (040) 5 (050) 6 (060) ALUMINUM GEAR OPERATOR WITH DUCTILE IRON DISC Gear Operator with E or T Seat $1119.50 $1260.50 $1293.00 $1447.00 $2182.00 $2254.00 $2786.00 $3694.50 $4096.50 Gear Operator with O Seat 1184.00 1320.50 1379.50 1562.00 2330.00 2857.50 3784.50 4923.50 5495.50 Gear Operator with Memory Stop E or T 1254.50 1396.00 1428.00 1582.00 2317.00 2423.50 2953.50 3933.00 4334.50 Gear Operator with Chain Wheel E or T 1617.50 1758.50 1791.50 1945.00 2680.00 2751.50 3282.50 4154.50 4557.50 Gear Operator with Memory Stop & Chain 1751.50 1893.50 1926.00 2078.50 2815.00 2919.50 3451.50 4392.50 4795.00 Wheel E or T Gear Operator with AWWA 2 Square Operator Nut POA POA POA POA POA POA POA POA POA ALUMINUM GEAR OPERATOR WITH STAINLESS STEEL TRIM Gear Operator with E or T Seat $1508.50 $1707.00 $1711.00 $2011.00 $3270.00 $3546.00 $4917.50 $7258.50 $8212.50 Gear Operator with O Seat 1726.50 1900.00 1985.00 2157.50 3372.50 4474.50 5935.00 7517.50 8643.00 ALUMINUM GEAR OPERATOR WITH ALUMINUM BRONZE TRIM Gear Operator with E or T Seat POA POA POA POA POA POA N/A N/A N/A Gear Operator with O Seat POA POA POA POA POA POA N/A N/A N/A KITS (Kit prices do not include valve) Spare Handwheel $45.50 $45.50 $45.50 $45.50 $91.50 $91.50 $91.50 $81.00 $81.00 Memory Stop (for Gear Operator) 141.00 141.00 141.00 141.00 175.50 175.50 175.50 267.50 267.50 CONVERSION KITS (Conversion Kit prices do not include valve) Gear Operator $823.50 $823.50 $823.50 $823.50 $823.50 $823.50 $823.50 $927.00 $927.00 10-Position Handle with Memory Stop 190.50 190.50 190.50 217.00 217.00 217.00 217.00 1060.50 1060.50 10-Position Tamper Proof 304.00 304.00 304.00 330.50 330.50 330.50 330.50 N/A N/A 8 (080) 10 (100) 12 (120) Section 3 Grooved IPS Valves N/A - Not available. POA - Priced on application. V - 040-76 1 S E - 0 Type In./mm Code Series Body Material Disc/Stem Seat Operator V 2/50 020 76 -Iron/IPS 1 - Ductile Iron S - Ductile Iron/416SS E - EPDM 0 - Bare 2½/65 024 B - Aluminum Bronze/ T - Lubricated 2-10-Position handle with memory stop 76.1 mm 761 416SS Nitrile 3 - Gear operator 3/80 030 V - Thermal Barrier O - Fluoroelastomer 4 - Lever lock with tamper resistant 4/100 040 X - CF8M/416SS device (8"/200 mm) 108.0 mm 108 5 - Gear operator with memory stop 5/125 050 9 - Special * 9 - Special* 6 - Gear operator with chain wheel 133.0 mm 133 7 - Gear operator with memory stop and 139.7 mm 139 chain wheel 6/150 060 8 - Gear operator with AWWA 2" square 159.0 mm 159 oper. nut 165.1 mm 165 8/200 080 9 - Special* 10/250 100 12/300 120 NOTES: * Details required with order 75

Series W761 Vic-300 (14 24 ) 300 psi AGS Butterfly Valve Series W709 AGS Butterfly Valve Grooved IPS Pipe Valves Section 3 Grooved IPS Valves AGS Vic-300 300 psi Butterfly Valve Series W761 Refer to publication 20.06 AGS Series Vic-300 Butterfly Valve Actual Code AGS Series Vic-300 Bare Valve With E or T Weight Each AGS Series Vic-300 With Gear Operator With E or T AGS Series Vic- 300 With Gear Operator With O Weight Each 1182-00 1182-20 1132-20 14 140 125.0 $5265.50 156.0 $6191.00 $7055.00 16 160 153.0 7383.50 201.0 8469.00 10050.50 18 180 199.0 9233.50 217.7 10423.50 12989.50 20 200 285.0 12686.50 384.2 14104.50 17576.50 24 240 451.0 16394.00 605.0 17961.00 23766.50 Actual Gear Operator Options Code Series Vic-300 With Gear Oper. and Memory Stop with E or T 1582-21 Series Vic-300 With Gear Oper. and Chainwheel with E or T 1582-22 14 140 $7121.50 $9056.50 16 160 9399.00 11334.50 18 180 11353.00 13289.00 20 200 15034.50 16970.00 24 240 18891.50 20826.50 Memory Stop and Chainwheel available. Contact Victaulic for pricing and availability 2 nut, in lieu of handwheel, available at no additional charge. Specify clearly on order. Must be ordered at time of purchase. This option is not designed for field installation. Galvanized chain @ $12.00 per foot. AGS Butterfly Valve Series W709 Refer to publication 20.07 Series W709 150 psi Weight Each Series W709 with Gear Operator Actual 26 859.8 + 28 1024.9 + 30 1300.4 + 32 1608.9 + 36 2159.9 + 40 3151.7 + 42 3438.2 + 46 4430.0 + 48 4749.6 + + Quoted on application. Contact Victaulic for pricing and availability. 76

Series 706 (14 24 ) 300 psi Butterfly Valve Grooved IPS Pipe Valves 300-psi Butterfly Valve Series 706 Series 706 300 psi Series 706 300-psi Butterfly Valve Actual Weight Each Series 706 Bare Valve With E or T Series 706 Bare Valve With O Weight Each Series 706 With Gear Operator With E or T Series 706 With Gear Operator With O Code 3182-00 3132-00 3182-20 3132-20 14 140 125.0 $10673.00 $12873.50 152.0 $11255.50 $13239.50 16 160 153.0 14338.00 17810.00 187.0 16272.00 20391.50 18 180 199.0 17274.00 20053.00 257.0 20018.00 22550.00 20 200 285.0 21771.00 26237.00 355.0 24652.50 28880.50 24 240 451.0 31279.50 35533.00 522.0 32994.00 38068.50 Actual Gear Operator Options Code Memory Stop Chain Wheel 14 140 + $3409.00 16 160 + 3409.00 18 180 + 3409.00 20 200 + 3409.00 24 240 + 3409.00 Memory Stop and Chainwheel available. Contact Victaulic for pricing and availability + Quoted on application. Contact Victaulic for pricing and availability. 2 nut, in lieu of handwheel, available at no additional charge. Specify clearly on order. Must be ordered at time of purchase. This option is not designed for field installation. Galvanized chain @ $12.00 per foot. Important: Series 706 valves must not be used with AGS products. Series W761 Vic-300 AGS butterfly valves and Series W709 butterfly valves must be used on Advanced Groove System (AGS) piping systems. V - 180-1 5 8 2-20 Section 3 Grooved IPS Valves Type V Act. In./mm 14/350 16/400 18/450 20/500 24/600 *Details required Code 140 160 180 200 240 Pressure Rating 3-300 psi (3) Body 5 - PPS Coated Iron 9 - Special* Closure Coupling Gasket Grade Bracket Accessories* 3 - Iron disc w/fluoroelastomer Seat/ Stainless Steel stems - "O" 7 - Iron disc w/nitrile Seat/Stainless Steel stems - T" 8 - Iron disc w/epdm Seat/Stainless Steel stems - "E" 9 - Special* 0 - No Bracket 2 - Standard 9 - Special* 00 - Bare 20 - Gear operator 21 - Gear operator with memory stop 22 - Gear operator with chain wheel 23 - Gear operator with AWWA square operating nut 24 - Gear operator with memory stop and chain wheel 29 - Non-std. gear operator* 9 - Special* 77

Series 700 Butterfly Valve Series 721 Grooved End Ball Valve Grooved IPS Pipe Valves Section 3 Grooved IPS Valves Butterfly Valve Series 700 Refer to publication 08.05 Series 700 200 psi Nominal Wgt. Each Valve with Two Position Padlockable Handle Standard Trim Stainless Steel Trim 1Z\x 2.8 $537.00 $681.00 2 3.3 537.00 681.00 2Z\x 6.4 682.50 826.50 3 6.8 771.00 915.00 4 12.1 847.50 993.00 5 26.1 1615.50 6 32.5 1709.50 1854.00 Series 700 valves furnished with rubber lined painted steel body, painted ductile housing and aluminum-bronze disc. Grade T Nitrile and Grade E EPDM liners are available. Refer to Valve Figure Number Chart below. V - 020-2 A A A - 1O Nom. Type In./mm Code V 1½/40 014 2/50 2½/65 3/80 4/100 5/125 6/150 020 024 030 040 050 060 NOTE: * Details required Pressure Rating Seat/Liner Disc & Trim Body Style Operator A - Standard 2-200 psi A - Grade E (EPDM) rubber-lined steel B - Grade T (Nitrile) rubber-lined steel 9 - Special* A - Al-Bronze B - Stainless steel C - Chrome plated Al-Bronze 10 - Two Position Lever Handle Grooved End Ball Valve Series 721 Refer to publication 08.14 Series 721 Grooved End Ball Valve Nominal Weight Each Valve Complete With 2-Position Handle 4 32.4 $2063.00 6 75.0 6329.00 B - 040-8 6 6 6-15 Act. Type In./mm Code B 4/100 040 6/150 060 Pressure Rating Body Ball & Stem Seat Operator 6 - Reinforced TFE 15-2 Position handle 8-800 psi/ 5515 kpa 1 - Iron 6 - Carbon steel, chrome plate 78

Series 726 Grooved End Ball Valve Grooved IPS Pipe Valves Grooved End Ball Valve Series 726 Refer to publication 08.23 1Z\x 3 Series 726 Carbon Steel or Stainless Steel Trim Nominal Weight Each Valve Complete With Handle & Tamper Resistant Lock/Seal Option WITH CARBON STEEL CHROME PLATED TRIM Valve * Complete With Gear Operator 1000 psi 1166-15 1166-20 1Z\x 4.4 $299.50 $796.00 2 6.5 332.00 1115.50 2Z\x 10.4 724.00 1464.50 3 14.9 1170.00 2074.50 800 psi 8166-15 8166-20 4 41.5 1810.00 2643.00 6 78.5 5554.50 6235.00 WITH STAINLESS STEEL TRIM 1000 psi 1126-15 1126-20 1Z\x 4.8 316.00 815.50 2 7.5 512.00 1642.00 2Z\x 11.6 1294.50 2069.00 3 17.2 1665.00 2640.50 800 psi 8126-15 8126-20 4 45.0 2267.00 3208.50 6 82.0 6103.50 7107.50 Section 3 Grooved IPS Valves 4 6 Series 726 valves are available with electric, pneumatic, and hydraulic actuators or chain wheels. Contact authorized valve automation centers (VAC) for details. * Valve with gear operator requires additional lead time. Contact Victaulic for details. When ordered separately, handles and locking device kits are non-cancellable and non-returnable. B - 020-1 1 6 6-16 Act. Type In./mm Code B 1½/40 014 2/50 2½/65 3/80 4/100 6/150 020 024 030 040 060 Pressure Rating Body Ball & Stem Seat Operator 1-1,000 psi 8-800 psi3 1 - Iron2 9 - Special1 NOTES: (1) Details required. (2) All Iron Body valves are NACE compliant. (3) Pressure rating applicable to 4 and 6" sizes only. * For Stainless Steel Series 726S, please see publication 17.22. 2-316 Stainless Steel 6 - Chrome Plated Carbon Steel 9 - Special1 6 - Reinforced PTFE 9 - Special1 00 - Bare 16-2-Position Handle with Tamperproof Locking Device 19 - Locking Device - Without Handle 20 - Gear Operator 21 - Gear Operator with Memory 22 - Gear Operator with Chain Wheel 23 - Gear Operator with AWWA Square Nut 29 - Non-standard Gear Operator1 79

Series 722 Threaded Brass Ball Valve Series 712 Swinger Check Valve Series 713 High Pressure Swinger Check Valve Grooved IPS Pipe Valves Section 3 Grooved IPS Valves Ball Valve Series 722 (Threaded) 600 psi (WOG) Refer to publication 08.15 Series 722 Ball Valve Nominal Wgt. Each Z\v 0.2 $49.00 Z\x 0.4 68.50 C\v 0.7 68.50 1 1.0 91.50 1Z\v 1.5 145.50 1Z\x 2.1 179.50 2 2.4 239.00 UL Listed, FM Approved in Z\x and larger sizes. Check Valve 300 psi Series 712 Refer to publication 08.11 Series 712 Grade E or T or Grade O With Ductile Iron Body Wgt. Ea. Grade E or T Grade O Fluoroelastomer 2 11.6 $439.50 $991.00 2Z\x 18.0 724.00 1062.00 3 22,5 841.50 1128.00 4 38.0 1196.50 1516.50 Series 712 Disc Kit Disc Kit Grade E or T Grade O 2 $208.50 $453.50 2Z\x 331.00 498.50 3 385.00 522.00 4 546.00 735.50 High Pressure Check Valve 1000 psi Series 713 Refer to publication 08.11 Series 713 Grade E or T With Ductile Iron Body Weight Each Grade E or T 2 12.0 $1201.00 80

Series 716H/716 Vic-Check Valve Grooved IPS Pipe Valves Vic-Check Check Valve Series 716H/716 Refer to publication 08.08 2 3 Series 716H Series 716H/716 Vic-Check Check Valve Nominal Weight Each E or T O 2 10.7 $547.50 $776.00 2Z\x 3.6 571.00 799.00 3 4.5 674.50 851.50 4 16.0 712.50 1196.50 5 20.0 1184.50 1715.50 6 28.0 1404.00 1945.00 8 40.0 1918.00 2295.00 10 100.0 5133.50 6753.00 12 140.0 6083.00 8109.50 For Series 716 sizes 4 12 only Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery. Valves come standard untapped optional two Z\x NPT drain holes. One hole on each side of seat also available as an option. Section 3 Grooved IPS Valves 4 12 Series 716 81

Series 779 Venturi Check Valve Series W715 AGS Vic-Check Valve Grooved IPS Pipe Valves Section 3 Grooved IPS Valves Venturi Check Valve Series 779 Refer to publication 08.10 Series 779 Venturi Check Valve Nominal Weight Each Valve * Complete Flow Measuring Kit ONLY 4 16.0 $1057.00 $395.50 5 20.0 1528.50 395.50 6 28.0 1748.50 395.50 8 40.0 2262.50 395.50 10 100.0 5452.50 395.50 12 140.0 6401.50 395.50 * Valve complete includes Venturi Check valve, drilled, tapped and plugged with Flow Measuring Kit enclosed (field assembly required). Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnect for meter connection and flow chart tag to affix to the valve. NOTE: Valve comes with two Z\, NPT drain holes and plug, one hole on each side of valve. C - 040-1 4 1 0-02 Act. Type In./mm Code C 2½/65 7 024 76.1 mm 3/80 7 4/100 5/125 139.7 mm 6/150 165.1 mm 8/200 10/250 12/300 076 030 040 050 139 060 165 080 100 120 Body Material Disc Seat Agency Accessories 1 - D.I. 3 - Coated D.I.* 9 - Special* 1 - All-Bronze with EPDM¹ 2 - All-Bronze with Nitrile 1 3 - All-Bronze with Viton 1 4 - D.I. with EPDM Encapsulation 3 5 - D.I. with Nitrile Encapsulation 3 6 - D.I. with Fluoroelastomer Encapsulation 3 9 - Special* NOTES: * Details must be provided with order 1-2½"/65 mm, 76.1 mm and 3"/80 mm sizes only 3 - s 4 12"/100 300 mm only 4 - This code is for Series 779 valves only (Example: C-060-1410-02) 5 - s 4 12"/100 300 mm only 6 - Includes two ½" taps on bottom of valve one each upstream and downstream of disc 7 - Limitations: 76.1 mm and 3"/80 mm sizes are not available in Series 779 configurations ** - 4"/100 mm and larger are always nickel 1 - Nickel ** 2 - PPS coated D.I. 1 0 - None 00 - None 02 - Flow Measuring Kit (Series 779) 4,5 05 - ½" Taps with Plugs for Drains 5,6 06-2" Drain Tap with ¼" Taps on Bottom of Valve 25 - Flow Measuring Kit with Drains Dual Disc Vic-Check Valve AGS Series W715 Refer to publication 20.08 AGS Series W715 Vic-Check Check Valve Nominal Weight Each Grade E 14 140.0 $6189.50 16 160.0 8436.00 18 180.0 11136.00 20 200.0 14638.50 24 240.0 18456.50 82

Series 377 Vic-Plug Balancing Valve Series 318 Sump Ejector Kit Grooved IPS Pipe Valves Balancing Plug Valve Series 377 (AWWA Dimensions) Use with Style 307 Transition coupling for IPS pipe. Refer to publication 08.12 Series 377 Balancing Plug Valve Nominal With Lever Operator With Gear Operator Wgt. Each Wgt. Each 3 47.0 $1415.50 39.0 $2682.50 4 54.0 1740.50 46.0 2783.00 6 89.0 2670.00 90.0 3750.00 8 (100 175 psi) 140.0 5775.50 10 218.0 7276.00 12 308.0 11096.00 Available standard with EPDM (Grade E ) or Nitrile (Grade T ). Specify choice on order. Coated plug, welded nickel seat and lever or gear operator complete with memory stop. Section 3 Grooved IPS Valves P - 080-2 1 1 1-81 Nom. In./mm Code Type P 3/80 030 4/100 040 6/150 060 8/200 080 10/250 100 12/300 120 Pressure Rating Body Material Plug Coating Seat Operator 1 - Iron 1 - Nickel 2-175 psi 9 - Special (1) 9 - Special (1) (1) Details must be supplied with order. (2) Details of operator must be supplied with order. (3) 3, 4, and 6"/80, 100 and 150 mm only. 1 - Nitrile - T 2 - EPDM - E 3- Fluoroelastomer - O 9 - Special (1) 9 - Special (1) 00 - Bare 11 - Std. Handle with memory stop (3) 81 - Gear operator with memory stop 82 - Gear operator with memory stop and chainwheel 89 - Special gear operator (2) Sump Ejector Kit Series 318 Refer to publication 23.12 Wgt. Assembled 3 91.4 $3421.50 4 128.8 3898.50 6 221.4 5471.00 Series 318 - Sump Ejector Kit * consists of the following components: Quantity Component 1 Series 365 Vic-Plug Valve 1 Series 317 AWWA Check Valve 2 Style 307 Transition Coupling 1 Style 31 AWWA Coupling * Kits are supplied unassembled. Arm and Spring Kit standard. 83

Series 731-D Suction Diffuser Series W731-D AGS Suction Diffuser Grooved IPS Pipe Accessories Section 3 Grooved IPS Valves Suction Diffuser Series 731-D Refer to publication 09.20 Series 731-D Suction Diffuser Grvd. End Inlet x Vic- Flange Adapter Outlet Nominal Wgt Each Centerline of Inlet Pipe to Flange Face 3 x 2 20.1 6.30 $2765.00 2Z\x 26.0 6.30 1988.00 3 27.7 6.30 2015.00 4 x 2Z\x 29.7 7.40 2184.00 3 31.6 7.40 2355.50 4 34.6 7.40 2729.00 5 x 2Z\x 46.2 8.40 3273.50 3 46.2 8.40 3820.00 4 49.4 8.40 3042.00 5 52.3 8.40 3195.00 6 x 4 64.0 9.00 3243.00 5 67.3 9.00 3878.00 6 70.3 9.00 4027.00 8 x 5 98.5 10.20 4130.50 6 102.1 10.20 4355.00 8 110.7 10.20 7494.00 10 x 6 150.6 12.40 7780.00 8 159.9 12.40 8455.00 10 172.0 12.40 10187.50 12 x 8 245.4 15.43 10667.00 10 260.3 15.43 12059.00 12 273.2 15.43 16771.50 Start up baskets are available for pricing contact Victaulic. Suction Diffuser AGS Series W731-D Refer to publication 20.20 AGS Series W731-D Suction Diffuser Grvd. End Inlet x Vic- Flange Adapter Outlet Nominal Wgt Each Centerline of Inlet Pipe to Flange Face 14 x 10 328.9 16.1 $13972.00 12 345.8 16.1 15608.00 14 367.6 16.1 18953.50 16 x 12 464.5 19.6 20721.50 14 489.9 19.6 19507.00 16 514.2 19.6 20721.50 18 x 14 788.6 21.7 29242.00 16 812.9 21.7 29841.00 18 828.3 21.7 28129.00 20 x 16 955.0 24.4 39685.50 18 970.5 24.4 40058.00 20 1019.0 24.4 38672.00 24 x 18 1255.8 26.4 59472.50 20 1337.4 26.4 62744.50 24 1401.3 26.4 63174.00 Start up baskets are available for pricing contact Victaulic. 84

Series 730 Vic-Strainer Tee Type Strainer Series W730 AGS Vic-Strainer Tee Type Strainer Series 732 Vic-Strainer Wye Type Strainer Grooved IPS Pipe Accessories Tee-Type Strainer Series 730 Refer to publication 09.02 Series 730 Tee Type Strainer Nominal Weight Each Standard Basket Only Fine Mesh Basket Only Standard * Galvanized 1Z\x 7.0 $1050.50 $1165.00 + + 2 8.0 1344.00 1576.00 $924.50 + 2Z\x 9.0 1412.50 1664.50 964.50 + 3 21.0 1585.00 1897.50 1005.00 + 4 20.5 1793.50 2198.50 872.00 + 5 31.0 2598.00 3111.00 931.00 + 6 44.0 2819.00 3437.50 949.00 + 8 90.6 4321.00 5305.50 1049.00 + 10 136.0 6344.00 7831.50 2477.50 + 12 197.0 8167.00 10056.50 2972.00 + + Quoted on application. Contact Victaulic for pricing and availability. * Vic-Strainer Series 730 standard components include ductile iron body, access cap and coupling (with Grade E EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series 730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. Contact Victaulic for application and pricing information. 12 mesh screens standard for 1Z\x 3 ; 6 mesh for 4 16, and 4 mesh for 18 30. NOTE: Series 730 Vic-Strainers in sizes 14 24 have a standard groove for retrofit only and must not be used with Advanced Groove System (AGS) products. Contact Victaulic for pricing and availability. Section 3 Grooved IPS Accessories Tee-Type Strainer AGS Series W730 Refer to publication 20.11 AGS Series W730 Tee-Type Strainer Nominal Weight Each Standard * Standard Basket Only Fine Mesh Basket Only 14 300.0 $25575.50 + + 16 350.0 31787.00 + + 18 400.0 41807.50 + + 20 565.0 53876.50 + + 24 830.0 66098.00 + + + Quoted on application. Contact Victaulic for pricing and availability. * Vic-Strainer Series W730 AGS standard components include ductile iron body, access cap and coupling (with Grade E EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series W730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. Contact Victaulic for application and pricing information. 6 mesh screens standard for 14 16, and 4 mesh for 18 24. Grooved End Vic-Strainer Series 732 Refer to publication 09.03 Series 732 Grooved End Vic-Strainer Nominal Weight Each Standard Basket Only Fine Perforated Basket Only Standard * Galvanized 2 10.0 $1361.00 $1521.50 $994.00 + 2Z\x 14.0 1430.00 1619.00 1036.50 + 3 20.0 1606.00 1846.00 900.50 + 4 32.0 1817.00 2148.00 937.00 + 5 50.0 2630.00 3133.00 1001.00 + 6 72.0 2854.50 3513.50 1021.00 + 8 125.0 4375.50 5476.00 1122.00 + 10 205.0 7032.00 8826.50 2663.00 + 12 280.0 12281.00 14925.00 3194.50 + + Quoted on application. Contact Victaulic for pricing and availability. * Vic-Strainer Series 732 standard components include ductile iron body, access cap and coupling (with Grade E EPDM or Nitrile Grade T gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series 732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. Contact Victaulic for application and pricing information. Standard stainless metal baskets are offered for the following sizes: 0.062 diameter holes for 2 3 sizes; 0.125 diameter holes for 4 12 sizes. 85

Series W732 AGS Vic-Strainer Wye Type Strainer Style 150 Mover Expansion Joint Grooved IPS Pipe Accessories Section 3 Grooved IPS Accessories Wye Type Vic-Strainer Series W732 Refer to publication 20.19 Series W732 Wye Type Vic-Strainer Nominal Weight Each Standard * Standard Basket Only Fine Perforated Basket Only 14 425.0 $27070.50 $9045.50 + 16 600.0 33644.00 11242.50 + 18 800.0 42352.50 14651.50 + + Quoted on application. Contact Victaulic for pricing and availability. * Vic-Strainer Series W732 standard components include ductile iron body, access cap and coupling (with Grade E EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series W732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. Contact Victaulic for application and pricing information. Standard stainless steel baskets are offered for the following sizes: 0.156 /4 mm diameter for holes 14 18 /350 450 mm sizes. Mover Expansion Joint Style 150 Refer to publication 09.04 Style 150 Mover Expansion Joint Maximum Available Expansion Grooved and Plain End E or T Weight Each Painted Galv. 2 15.9 3 $1694.50 $1996.00 3 25.6 3 1947.00 2293.50 4 39.6 3 2565.50 3021.00 5 55.0 3 3261.00 3909.00 6 75.0 3 3987.00 4696.50 Victaulic Style 150 Expansion Joints are supplied fully assembled, with a Grade E gasket for water services up to +230 F. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout Style 99 couplings, or with grooved ends for installation using Victaulic Coupling Style 77, 75, HP-70 or 07 Zero- Flex couplings. NOTE: Style 155 Expansion Joints in sizes C\v 24 are available. Style 155 Expansion Joints are non-cancellable and non-returnable. Contact Victaulic for details. 86

SECTION 4 Hydronic Balancing Products Hydronic Balancing Products 87

Balancing Valves TA Series 786 STAS TA Series 787 STAD Series 78K STADK Hydronic Balancing Products Manual Balancing Valves TA Series 786 Solder End (300 psi) Refer to publication 08.16 TA Series 786 STAS Nominal Victaulic Part Code Tour & Andersson Code List Price Z\x V-004-786-CBV 52-167-914 $84.00 C\v V-006-786-CBV 52-167-920 89.00 1 V-010-786-CBV 52-167-925 119.00 1Z\v V-012-786-CBV 52-167-932 183.00 1Z\x V-014-786-CBV 52-167-940 211.00 2 V-020-786-CBV 52-167-950 317.00 Section 4 Hydronic Balancing Products TA Series 787 NPT (Fem.) End (300 psi) Refer to publication 08.16 Series 78K FPT End x MPT Union (400 psi) Refer to publication 08.16 TA Series 787 STAD Nominal Victaulic Part Code Tour & Andersson Code List Price Z\x V-004-787-CBV 52-167-514 $82.00 C\v V-006-787-CBV 52-167-520 90.00 1 V-010-787-CBV 52-167-525 121.00 1Z\v V-012-787-CBV 52-167-532 185.00 1Z\x V-014-787-CBV 52-167-540 214.00 2 V-020-787-CBV 52-167-550 320.00 Note: 1Z\x and 2 sizes available with fluoroelastomer gasket, contact Victaulic for pricing and availability. Series 78K STADK with Union Connection Nominal MPT Union x FPT Valve Victaulic Part Code Z\x x Z\x V-004-78K-CBV $127.00 C\v V-X87-78K-CBV 137.00 C\v x C\v V-006-78K-CBV 137.00 1 V-A61-78K-CBV 173.00 1 x 1 V-010-78K-CBV 173.00 1Z\v V-Z90-78K-CBV 225.00 1Z\v x 1Z\v V-012-78K-CBV 225.00 1Z\x V-Z91-78K-CBV 309.00 1Z\x x 1Z\x V-014-78K-CBV 309.00 2 V-J86-78K-CBV 388.00 2 x 2 V-020-78K-CBV 388.00 Optional tailpieces must be ordered for double or triple reductions. If needed, specify tailpiece option when ordering. 88

TA Series 788 STAF TA Series 789 STAG TA Series 786 and 787 Insulation Kits Hydronic Balancing Products TA Series 788 Flanged End (250 psi) Class 150 design Refer to publication 08.16 TA Series 788 STAF Nominal Victaulic Part Code Tour & Andersson Code List Price 2Z\x V-024-788-CBV 52-167-965 $794.50 3 V-030-788-CBV 52-167-980 1214.00 4 V-040-788-CBV 52-167-990 1673.00 5 V-050-788-CBV 52-167-991 2993.50 6 V-060-788-CBV 52-167-992 3826.50 8 V-080-788-CBV 52-167-993 8269.50 10 V-100-788-CBV 52-167-994 10741.00 12 V-120-788-CBV 52-167-995 22488.50 14 V-140-788-CBV 52-182-996 24404.00 16 V-160-788-CBV 52-182-997 26708.50 TA Series 789 Grooved End (350 psi) Refer to publication 08.16 TA Series 786 and 787 Insulation Kits Refer to publication 08.16 TA Series 789 STAG Nominal Victaulic Part Code Tour & Andersson Code List Price 2Z\x V-024-789-CBV 52-167-073 $687.00 3 V-030-789-CBV 52-167-089 1068.50 4 V-040-789-CBV 52-167-114 1477.00 5 V-050-789-CBV 52-167-141 2672.50 6 V-060-789-CBV 52-167-168 3580.00 8 V-080-789-CBV 52-167-219 7627.00 10 V-100-789-CBV 52-167-273 10007.50 12 V-120-789-CBV 52-167-324 21746.00 Note: 2Z\x, 3, 4, 6, 8 10 and 12 sizes available with fluoroelastomer gasket, contact Victaulic for pricing and availability. TA Series 786 & 787 Insulation Kits Nominal Victaulic Part Code List Price Z\x and C\v K-004-784-INS $24.00 1 K-010-784-INS 26.50 1Z\v K-012-784-INS 30.00 1Z\x K-014-784-INS 32.50 2 K-020-784-INS 39.50 Section 4 Hydronic Balancing Products 89

TA Series 788 and 789 Insulation Kits TA Series 786 Drain Kit Spare Parts Hydronic Balancing Products TA Series 788 and 789 Insulation Kits Refer to publication 08.16 TA Series 788 and 789 Insulation Kits Nominal Victaulic Part Code Tour & Andersson Code List Price 2Z\x K-024-784-INS 52-189-865 $447.00 3 K-030-784-INS 52-189-880 497.50 4 K-040-784-INS 52-189-890 553.00 5 K-050-784-INS 52-189-891 617.50 6 K-060-784-INS 52-189-892 762.00 Kit 786 * Drain Kit Refer to publication 08.16 TA Series 786 Drain Kit Victaulic Part Code Tour & Andersson Code List Price K-000-786-CBV 52-167-997 $26.00 * For use with TA Series 786 and 787 valves only. Section 4 Hydronic Balancing Products Spare Parts Refer to publication 08.16 Z\x 2 Replacement Probe Port Tour & Andersson Spare Parts Nominal Victaulic Part Code Tour & Andersson Code List Price Replacement Probe Port Set Z\x 2 K-000-740-003 52-179-810 $75.50 2Z\x 12 K-000-740-002 52-179-811 84.00 Extended (2C\,) Port Set 2Z\x 12 K-000-740-001 52-179-812 114.00 Handwheel - Plastic Z\x 2 P-004-784-001 52-186-009 36.50 2Z\x 6 P-024-784-001 52-186-098 118.00 Handwheel - Aluminum 8 12 P-080-784-001 52-186-098 821.50 Measuring Probes Z\x 12 P-000-738-100 307-635-62 188.00 Probes for Series 738 Differential Gauge Meter Without Valve K-000-740-005 52-179-006 85.50 2Z\x 12 Replacement Probe Port Extended Probe Port 0 0 STAD 2 ½ Plastic Handwheel Aluminum Handwheel 90

Automatic Balancing Valves Series 76T Series 76B Series 76K Series 76V Hydronic Balancing Products Automatic Balancing Valves Victaulic automatic balancing valves are available as an alternative to manual balancing valves when ordering a Victaulic Koil-Kit Coil Pack. Contact Victaulic for details. Series 76T Female x Female Threaded Refer to publication 08.34 Series 76T Nominal Approx. Wgt. Ea. Victaulic Part Code List Price Z\x 1.3 V-004-76T-0 $141.00 C\v 1.3 V-006-76T-0 143.00 1 1.5 V-010-76T-0 158.00 1 * 3.4 V-010-76T-H 303.00 1Z\v 3.4 V-012-76T-0 303.00 1Z\x 3.4 V-014-76T-0 303.00 2 3.7 V-020-76T-0 330.00 * High Flow Series 76B Female x Female Threaded with a Ball Valve Kit Refer to publication 08.34 Series 76K Male x Female Threaded Refer to publication 08.34 Series 76B * High Flow Series 76K * High Flow Nominal Approx. Wgt. Ea. Victaulic Part Code List Price Z\x 1.7 V-004-76B-0 $229.00 C\v 2.1 V-006-76B-0 233.00 1 2.6 V-010-76B-0 271.00 1 * 4.6 V-010-76B-H 416.00 1Z\v 5.1 V-012-76B-0 470.00 1Z\x 2.8 V-014-76B-0 504.00 2 6.6 V-020-76B-0 590.00 Nominal Approx. Wgt. Ea. Victaulic Part Code List Price Z\x 1.5 V-004-76K-0 $194.00 C\v 2.0 V-006-76K-0 198.00 1 3.5 V-010-76K-0 220.00 1 * 5.4 V-010-76K-H 364.00 1Z\v 5.4 V-012-76K-0 356.00 1Z\x 5.5 V-014-76K-0 416.00 2 5.9 V-020-76K-0 419.00 Section 4 Hydronic Balancing Products Series 76V Male x Female Threaded with a Ball Valve Kit Refer to publication 08.34 Series 76V * High Flow Nominal Approx. Wgt. Ea. Victaulic Part Code List Price Z\x 1.9 V-004-76V-0 $282.00 C\v 2.8 V-006-76V-0 287.00 1 4.7 V-010-76V-0 333.00 1 * 6.6 V-010-76V-H 467.00 1Z\v 7.2 V-012-76V-0 523.00 1Z\x 7.9 V-014-76V-0 617.00 2 8.8 V-020-76V-0 680.00 91

Hydronic Balancing Products Adders for Series 76 Sweat Adapter Refer to publication 08.34 Series 76 Sweat Adapter Adder Nominal List Price Z\x $163.00 C\v 165.00 1 180.00 1 * 325.00 1Z\v 325.00 1Z\x 325.00 2 352.00 * High Flow Accessories Refer to publication 08.34 Series 76 Accessories PT Ports Length Victaulic Price Part Code Each 2 P-000-76T-2XT $38.00 4 P-000-76T-4XT 43.00 Section 4 Hydronic Balancing Products 2 PT Port 92

Balancing Valve Cartridges Hydronic Balancing Products Automatic Balancing Valve Cartridges Refer to publication 08.34 Flow gpm min P psi Low Pressure No. Max P 43.5 psi Victaulic Code Price Each Cartridge Type 10 High Pressure No. Max P 87 psi Victaulic Code Price Each 0.11 1.02 1A $53.00 0.15 1.02 1B 53.00 0.20 1.02 1C 53.00 0.24 1.02 1D 53.00 AD $76.00 0.33 1.16 1E 53.00 AE 76.00 0.39 1.31 1F 53.00 AF 76.00 0.46 1.45 1G 53.00 AG 76.00 0.50 1.45 1H 53.00 AH 76.00 0.57 1.60 1I 53.00 AI 76.00 0.68 1.60 1J 53.00 AJ 76.00 0.77 1.74 1K 53.00 AK 76.00 0.90 1.74 1L 53.00 AL 76.00 1.06 1.74 1M 53.00 AM 76.00 1.23 1.74 1N 53.00 AN 76.00 1.41 1.89 1O 53.00 AO 76.00 1.54 1.89 1P 53.00 AP 76.00 1.76 1.89 1Q 53.00 AQ 76.00 2.10 2.03 1R 53.00 AR 76.00 2.40 2.03 1S 53.00 AS 76.00 Cartridge Type 11 2.71 2.03 1T $53.00 AT $76.00 2.95 2.03 1U 53.00 AU 76.00 3.24 2.03 1V 53.00 AV 76.00 3.52 2.32 1W 53.00 AW 76.00 3.83 2.76 1X 53.00 AX 76.00 4.12 3.05 1Y 53.00 AY 76.00 Cartridge Type 20 4.49 3.19 2A $53.00 BA $76.00 4.76 3.19 2B 53.00 BB 76.00 5.26 3.19 2C 53.00 BC 76.00 5.88 3.34 2D 53.00 BD 76.00 6.53 3.34 2E 53.00 BE 76.00 6.96 3.34 2F 53.00 BF 76.00 7.81 3.48 2G 53.00 BG 76.00 8.07 3.48 2H 53.00 BH 76.00 9.16 3.63 2I 53.00 BI 76.00 9.91 3.77 2J 53.00 BJ 76.00 10.21 3.92 2K 53.00 BK 76.00 10.78 4.06 2L 53.00 BL 76.00 Flow gpm min P psi Low Pressure No. Max P 43.5 psi Victaulic Code Price Each Cartridge Type 30 High Pressure No. Max P 87 psi Victaulic Code Price Each 2.97 1.74 3A $118.00 CA $164.00 3.79 1.74 3B 118.00 CB 164.00 4.49 1.74 3C 118.00 CC 164.00 5.00 1.74 3D 118.00 CD 164.00 5.24 1.74 3E 118.00 CE 164.00 5.60 1.89 3F 118.00 CF 164.00 5.94 1.89 3G 118.00 CG 164.00 6.54 1.89 3H 118.00 CH 164.00 6.90 2.03 3I 118.00 CI 164.00 7.18 2.03 3J 118.00 CJ 164.00 7.99 2.03 3K 118.00 CK 164.00 8.81 2.18 3L 118.00 CL 164.00 9.00 2.32 3M 118.00 CM 164.00 9.56 2.32 3N 118.00 CN 164.00 10.00 2.47 3O 118.00 CO 164.00 10.48 2.47 3P 118.00 CP 164.00 11.00 2.61 3Q 118.00 CQ 164.00 11.62 2.61 3R 118.00 CR 164.00 12.64 2.76 3S 118.00 CS 164.00 14.05 3.05 3T 118.00 CT 164.00 15.00 3.19 3U 118.00 CU 164.00 15.35 3.19 3V 118.00 CV 164.00 Cartridge Type 40 16.00 2.90 4A $118.00 DA $164.00 16.20 3.05 4B 118.00 DB 164.00 18.00 3.05 4C 118.00 DC 164.00 19.00 3.05 4D 118.00 DD 164.00 20.00 3.19 4E 118.00 DE 164.00 21.00 3.19 4F 118.00 DF 164.00 22.00 3.34 4G 118.00 DG 164.00 24.00 3.48 4H 118.00 DH 164.00 26.00 3.63 4I 118.00 DI 164.00 28.00 3.77 4J 118.00 DJ 164.00 30.00 3.92 4K 118.00 DK 164.00 32.00 4.06 4L 118.00 DL 164.00 34.00 4.35 4M 118.00 DM 164.00 36.00 4.50 4N 118.00 DN 164.00 38.00 4.79 4O 118.00 DO 164.00 40.00 4.93 4P 118.00 DP 164.00 42.00 5.11 4Q 118.00 DQ 164.00 44.00 5.51 4R 118.00 DR 164.00 46.00 5.80 4S 118.00 DS 164.00 48.00 6.09 4T 118.00 DT 164.00 50.00 6.38 4U 118.00 DU 164.00 Section 4 Hydronic Balancing Products 93

Series 799/79V, KOIL-KIT Coil Pack Hydronic Balancing Products KOIL-KIT Coil Pack Distributor Order Form (b) Series 799/79V/79A/79B ATC Balancing Valve RETURN ATC Coil Hose (2) Series 78U Balancing Valve COIL Coil Hose (2) Series 78U RETURN COIL Coil Hose (3) for Bypass Bypass Valve SUPPLY Coil Hose (1) Supply Valve Coil Hose (1) Series 78Y with Bypass Tee OR Series 78T with Bypass Tee SUPPLY Series 799/79V Series 79A/79B with Bypass Options Section 4 Hydronic Balancing Products To calculate a price and create a configuration number for the KOIL-KIT Coil Pack or KOIL-KIT Coil Pack with ATC Valve, use the following charts and a copy of the KOIL-KIT Coil Pack Contractor Order Form (a), use literature code SF-33, (supplied by requesting contractor). 1. Select the size required from the top row of each section. 2. In each box, circle the price and configuration number related to the size and end configuration. Fill in the price and configuration number in the designated area labeled Price and Configuration Number located at the far right of each box. If you do not wish to purchase a certain product, use the part code for None. Coil hoses can be provided as connected or unconnected. Be sure to select the corresponding price and configuration number. 3. Add the price of each option to calculate your total price. If ordering a KOIL-KIT Coil Pack with ATC Valve, an additional list price charge of $75 will be added to the order. (When selecting a Victaulic KOIL-KIT Coil Pack with ATC valve, the outlet of the Series 78U and the inlet of the Series 78K must meet the connection requirements of the ATC valve, otherwise Victaulic will not pre-connect the ATC valve and final assembly will be required in the field.) 4. If ordering a KOIL-KIT with bypass options, an additional list price charge will be applied to your order. Charges vary by drain valve inlet size: Z\x $36.00; C\v $51.00; 1 $82.00; 1Z\v $224.00; 1Z\x $224.00; 2 $321.00 5. Fill in the configuration number for each of your selected products in corresponding Boxes 1 through 5 on the last page of this form. If you do not wish to purchase a certain product, use the configuration number for None. Be sure to use the corresponding row when entering the completed configuration number. 6. Once completed, submit your order to Victaulic Customer Care via fax. United States and Latin America (fax) 888-265-2018 The following items must be included or your order will not be processed: 1) All pages of the Distributor Order Form (b) 2) A copy of the Contractor Order Form (a) found on. (Use literature code SF-33) 3) Your purchase order 4) Bag and Tag information sheet (required if applicable) Victaulic automatic balancing valves are available as an alternative to manual balancing valves when ordering a Victaulic Koil-Kit Coil Pack. Contact Victaulic for details. 94

Hydronic Balancing Products End Config. Inlet x Outlet Series 78Y Fem. Thread x Fem. Union (Std.) Fem. Thread x Sweat Union Fem. Thread x Male Union Sweat x Fem. Union Sweat x Sweat Union (Std.) Sweat x Male Union Series 78T Fem. Thread x Fem. Union (Std.) Fem. Thread x Sweat Union Fem. Thread x Male Union Sweat x Fem. Union Drain Valve Options (Choose Series 78Y, 78T, 722 or None) Z\x x Z\x C\v x Z\x C\v x C\v 1 x Z\x 1 x C\v 1 x 1 1Z\v x C\v 1Z\v x 1 1Z\v x 1Z\v 1Z\x x 1 1Z\x x 1Z\v 1Z\x x 1Z\x 2 x 1Z\v 2 x 1Z\x 2 x 2 $131 $137 $137 $215 $215 $215 $248 $248 $248 $386 $386 $386 $454 $454 $454 YAFAF YBFAF YBFBF YCFAF YCFBF YCFCF YDFBF YDFCF YDFDF YEFCF YEFDF YEFEF YFFDF YFFEF YFFFF $152 $158 $158 $236 $236 $236 $270 $270 $270 $407 $407 $407 $475 $475 $475 Enter Selected Price/ Configuration Number Below YAFAS YBFAS YBFBS YCFAS YCFBS YCFCS YDFBS YDFCS YDFDS YEFCS YEFDS YEFES YFFDS YFFES YFFFS Price $152 $158 $158 $236 $236 $236 $270 $270 $270 $407 $407 $407 $475 $475 $475 YAFAM YBFAM YBFBM YCFAM YCFBM YCFCM YDFBM YDFCM YDFDM YEFCM YEFDM YEFEM YFFDM YFFEM YFFFM $ $152 $158 $158 $236 $236 $236 $270 $270 $270 $407 $407 $407 $475 $475 $475 Configuration YASAF YBSAF YBSBF YCSAF YCSBF YCSCF YDSBF YDSCF YDSDF YESCF YESDF YESEF YFSDF YFSEF YFSFF Number $131 $137 $137 $215 $215 $215 $248 $248 $248 $386 $386 $386 $454 $454 $454 YASAS YBSAS YBSBS YCSAS YCSBS YCSCS YDSBS YDSCS YDSDS YESCS YESDS YESES YFSDS YFSES YFSFS $152 $158 $158 $236 $236 $236 $270 $270 $270 $407 $407 $407 $475 $475 $475 YASAM YBSAM YBSBM YCSAM YCSBM YCSCM YDSBM YDSCM YDSDM YESCM YESDM YESEM YFSDM YFSEM YFSFM $106 $110 $110 $172 $172 $172 $199 $199 $199 $309 $309 $309 $363 $363 $363 TAFAF TBFAF TBFBF TCFAF TCFBF TCFCF TDFBF TDFCF TDFDF TEFCF TEFDF TEFEF TFFDF TFFEF TFFFF $127 $131 $131 $194 $194 $194 $220 $220 $220 $330 $330 $330 $385 $385 $385 TAFAS TBFAS TBFBS TCFAS TCFBS TCFCS TDFBS TDFCS TDFDS TEFCS TEFDS TEFES TFFDS TFFES TFFFS Price $127 $131 $131 $194 $194 $194 $220 $220 $220 $330 $330 $330 $385 $385 $385 TAFAM TBFAM TBFBM TCFAM TCFBM TCFCM TDFBM TDFCM TDFDM TEFCM TEFDM TEFEM TFFDM TFFEM TFFFM $ $127 $131 $131 $194 $194 $194 $220 $220 $220 $330 $330 $330 $385 $385 $385 TASAF TBSAF TBSBF TCSAF TCSBF TCSCF TDSBF TDSCF TDSDF TESCF TESDF TESEF TFSDF TFSEF TFSFF Box 1 OR Configuration Number Sweat x $106 $110 $110 $172 $172 $172 $199 $199 $199 $309 $309 $309 $363 $363 $363 Sweat Union (Std.) TASAS TBSAS TBSBS TCSAS TCSBS TCSCS TDSBS TDSCS TDSDS TESCS TESDS TESES TFSDS TFSES TFSFS Sweat x $127 $131 $131 $194 $194 $194 $220 $220 $220 $330 $330 $330 $385 $385 $385 Male Union TASAM TBSAM TBSBM TCSAM TCSBM TCSCM TDSBM TDSCM TDSDM TESCM TESDM TESEM TFSDM TFSEM TFSFM Series 722 Ball Valve OR Fem. Thread $74 $99 $99 $120 $120 $120 $206 $206 $206 $246 $246 $246 $332 $332 $332 x Male Union BAFAM BBFAM BBFBM BCFAM BCFBM BCFCM BDFBM BDFCM BDFDM BEFCM BEFDM BEFEM BFFDM BFFEM BFFFM Price Fem. Thread $74 $99 $99 $120 $120 $120 $206 $206 $206 $246 $246 $246 $332 $332 $332 x Fem. Union BAFAD BBFAD BBFBD BCFAD BCFBD BCFCD BDFBD BDFCD BDFDD BEFCD BEFDD BEFED BFFDD BFFED BFFFD $ Sweat x $91 $117 $117 $142 $142 $142 $228 $228 $228 $268 $268 $268 $354 $354 $354 Male Union BASAM BBSAM BBSBM BCSAM BCSBM BCSCM BDSBM BDSCM BDSDM BESCM BESDM BESEM BFSDM BFSEM BFSFM Configuration Number $91 $117 $117 $142 $142 $142 $228 $228 $228 $268 $268 $268 $354 $354 $354 Sweat x Fem. Union BASAD BBSAD BBSBD BCSAD BCSBD BCSCD BDSBD BDSCD BDSDD BESCD BESDD BESED BFSDD BFSED BFSFD Fem. Thread $68 $69 $92 $146 $180 $240 x Fem. Thread BAFAF BBFBF BCFCF BDFDF BEFEF BFFFF NONE OR $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 Price $ XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX Configuration Number Section 4 Hydronic Balancing Products 95

Hydronic Balancing Products Hose Options (Choose Supply Hose 1 and 2 or None) + Section 4 Hydronic Balancing Products End Config. Inlet x Outlet Male x Female Union Swivel (Connected) Male x Female Union Swivel (Connected) Male x Female Union Swivel (Connected) Male x Male Union Swivel (Connected) Male x Male Union Swivel (Connected) Male x Male Union Swivel (Connected) Male x Female Union Swivel (Unconnected) Male x Female Union Swivel (Unconnected) Male x Female Union Swivel (Unconnected) Male x Male Union Swivel (Unconnected) Male x Male Union Swivel (Unconnected) Male x Male Union Swivel (Unconnected) NONE Length 12 24 36 12 24 36 12 24 36 12 24 36 Z\x x Z\x C\v x C\v 1 x 1 1Z\v x 1Z\v 1Z\x x 1Z\x 2 x 2 $45 $78 $128 $172 $293 $544 Box 3 and 4 AA BA CA DA EA FA Price $52 $85 $132 $230 $303 $554 $ AB BB CB DB EB FB Configuration Number $60 $101 $158 $244 $393 $646 AC BC CC DC EC FC $52 $82 $118 $169 $322 $562 AD BD CD DD ED FD Price $56 $85 $132 $242 $323 $572 $ AE BE CE DE EE FE Configuration Number $60 $101 $158 $256 $399 $655 AF BF CF DF EF FF $33 $65 $117 $161 $280 $531 1A 2A 3A 4A 5A 6A Price $40 $72 $120 $218 $292 $543 $ 1B 2B 3B 4B 5B 6B Configuration Number $47 $88 $144 $233 $381 $633 1C 2C 3C 4C 5C 6C $38 $70 $# $158 $310 $549 1D 2D 3D 4D 5D 6D Price $43 $72 $120 $230 $311 $561 $ 1E 2E 3E 4E 5E 6E Configuration Number $47 $88 $144 $243 $388 $642 1F 2F 3F 4F 5F 6F $0 $0 $0 $0 $0 $0 00 00 00 00 00 00 OR Price $ Configuration Number 96

Hydronic Balancing Products End Config. Inlet x Outlet Series 78U Fem. x Fem. Union Fem. x Sweat Union Fem. x Male Union (Std.) Sweat x Fem. Union Sweat x Sweat Union Sweat x Male Union (Std.) NONE Union Port Fitting (Choose Series 78U or None) + Z\x x Z\x C\v x Z\x C\v x C\v 1 x Z\x 1 x C\v 1 x 1 1Z\v x Z\x 1Z\v x C\v 1Z\v x 1 1Z\v x 1Z\v 1Z\x x C\v 1Z\x x 1 1Z\x x 1Z\v 1Z\x x 1Z\x 2 x 1 2 x 1Z\v 2 x 1Z\x 2 x 2 $64 $68 $68 $88 $88 $88 $115 $115 $115 $127 $127 $127 $188 $188 $188 AFAF BFAF BFBF CFAF CFBF CFCF DFBF DFCF DFDF EFCF EFDF EFEF FFDF FFEF FFFF $64 $68 $68 $88 $88 $88 $115 $115 $115 $127 $127 $127 $188 $188 $188 AFAS BFAS BFBS CFAS CFBS CFCS DFBS DFCS DFDS EFCS EFDS EFES FFDS FFES FFFS Price $43 $47 $47 $67 $67 $67 $94 $94 $94 $94 $106 $106 $106 $106 $167 $167 $167 $167 AFAM BFAM BFBM CFAM CFBM CFCM DFAM DFBM DFCM DFDM EFBM EFCM EFDM EFEM FFCM FFDM FFEM FFFM $ $64 $68 $68 $88 $88 $88 $115 $115 $115 $127 $127 $127 $188 $188 $188 Configuration ASAF BSAF BSBF CSAF CSBF CSCF DSBF DSCF DSDF ESCF ESDF ESEF FSDF FSEF FSFF Number $64 $68 $68 $88 $88 $88 $115 $115 $115 $127 $127 $127 $188 $188 $188 ASAS BSAS BSBS CSAS CSBS CSCS DSBS DSCS DSDS ESCS ESDS ESES FSDS FSES FSFS $43 $47 $47 $67 $67 $67 $94 $94 $94 $94 $106 $106 $106 $106 $167 $167 $167 $167 ASAM BSAM BSBM CSAM CSBM CSCM DSAM DSBM DSCM DSDM ESBM ESCM ESDM ESEM FSCM FSDM FSEM FSFM $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Box 5 OR Price $ Configuration Number Section 4 Hydronic Balancing Products 97

Hydronic Balancing Products Section 4 Hydronic Balancing Products End Config. Inlet x Outlet TA Series 78K Male Union x Female (Std.) Male Union x Sweat Female Union x Female (Std.) Female Union x Sweat TA Series 787 Balancing Valve Options (Choose Series 78K or 786, 787, 722 or None) + Z\x x Z\x Z\x x C\v Z\x x 1 Z\x x 1Z\v C\v x C\v C\v x 1 C\v x 1Z\v C\v x 1Z\x 1 x 1 1 x 1Z\v 1 x 1Z\x 1 x 2 1Z\v x 1Z\v 1Z\v x 1Z\x 1Z\v x 2 1Z\x x 1Z\x 1Z\x x 2 2 x 2 $127 $137 $173 $225 $137 $173 $225 $309 $173 $225 $309 $388 $225 $309 $388 $309 $388 $388 MAMAF MAMBF MAMCF MAMDF MBMBF MBMCF MBMDF MBMEF MCMCF MCMDF MCMEF MCMFF MDMDF MDMEF MDMFF MEMEF MEMFF MFMFF Price $148 $158 $195 $247 $158 $195 $247 $331 $195 $247 $331 $410 $247 $331 $410 $331 $410 $410 MAMAS MAMBS MAMCS MAMDS MBMBS MBMCS MBMDS MBMES MCMCS MCMDS MCMES MCMFS MDMDS MDMES MDMFS MEMES MEMFS MFMFS $ $127 $137 $173 $137 $173 $225 $309 $173 $225 $309 $225 $309 $388 $309 $388 $388 Configuration Number MADAF MADBF MADCF MBDBF MBDCF MBDDF MBDEF MCDCF MCDDF MCDEF MDDDF MDDEF MDDFF MEDEF MEDFF MFDFF $148 $158 $195 $158 $195 $247 $331 $195 $247 $331 $247 $331 $410 $331 $410 $410 MADAS MADBS MADCS MBDBS MBDCS MBDDS MBDES MCDCS MCDDS MCDES MDDDS MDDES MDDFS MEDES MEDFS MFDFS OR Price $82 $90 $121 $185 $214 $320 $ Female x Female Configuration MAFAF MBFBF MCFCF MDFDF MEFEF MFFFF Number TA Series 786 OR Price $84 $89 $119 $183 $211 $317 $ Sweat x Sweat Configuration MASAS MBSBS MCSCS MDSDS MESES MFSFS Number Series 722 Ball Valve OR Male Union $74 $99 $120 $206 $99 $120 $206 $246 $120 $206 $246 $332 $206 $246 $332 $246 $332 $332 x Fem. (Std.) BAMAF BAMBF BAMCF BAMDF BBMBF BBMCF BBMDF BBMEF BCMCF BCMDF BCMEF BCMFF BDMDF BDMEF BDMFF BEMEF BEMFF BFMFF Price Male Union $91 $117 $142 $228 $117 $142 $228 $268 $142 $228 $268 $354 $228 $268 $354 $268 $354 $354 x Sweat BAMAS BAMBS BAMCS BAMDS BBMBS BBMCS BBMDS BBMES BCMCS BCMDS BCMES BCMFS BDMDS BDMES BDMFS BEMES BEMFS BFMFS $ Fem. Union x Fem. (Std.) Fem. Union x Sweat Fem. Thread x Fem. Thread NONE $74 $99 $120 $99 $120 $206 $246 $120 $206 $246 $206 $246 $332 $246 $332 $332 Configuration BADAF BADBF BADCF BBDBF BBDCF BBDDF BBDEF BCDCF BCDDF BCDEF BDDDF BDDEF BDDFF BEDEF BEDFF BFDFF Number $91 $117 $142 $117 $0 $228 $268 $142 $228 $268 $228 $268 $354 $268 $354 $354 BADAS BADBS BADCS BBDBS BBDCS BBDDS BBDES BCDCS BCDDS BCDES BDDDS BDDES BDDFS BEDES BEDFS BFDFS $68 $69 $92 $146 $180 $240 BAFAF BBFBF BCFCF BDFDF BEFEF BFFFF $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX Box 7 OR Price $ Configuration Number 98

Hydronic Balancing Products Extra Options No EXTRA Options Needed Add a second Drain Valve identical to first Automatic Air Vent Manual Air Vent Drain Valve (Choose Series 78Y or 78T or None) EXTRA OPTIONS + End Config. Inlet x Outlet Price/Configuration Number Box 2 Add a second Drain Valve with different options than first Customer specific option(s) $0 0 Locate price on Drain Valve chart 2 Price + $ A $27.00 M Locate price on Drain Valve chart X + Y Configuration Number + Quoted on application. Contact Victaulic for pricing and availability. Union Port Fitting (Choose 78U or None) EXTRA OPTIONS + End Config. Inlet x Outlet Price/Configuration Number Box 6 $0 No EXTRA Options Needed 0 Locate price on Union Port Fitting chart Add a second Union Port Fitting identical to first 2 + Automatic Air Vent A Price $35.50 Drain Valve and PT Port D $ $35.50 Configuration Drain Valve with Manual Air Vent Number E + Drain Valve with Automatic Air Vent F Add a second Union Port Fitting with different options than Locate price on Union Port Fitting chart first X + Customer specific option(s) Y Section 4 Hydronic Balancing Products + Quoted on application. Contact Victaulic for pricing and availability. 99

Hydronic Balancing Products Extra Options Balancing Valve (78K, 786, 787) EXTRA OPTIONS + No EXTRA Options Needed Add a second Balancing Valve identical to first Connect Balancing Valve to Union Port Fitting End Config. Inlet x Outlet Price/Configuration Number Box 8 Connect to Union Port Fitting, enlarge after Balancing Valve Enlargement after Balancing Valve Drain Kit Add a second Balancing Valve with different options than first Customer specific option(s) + Quoted on application. Contact Victaulic for pricing and availability. $0 0 Locate price in Balancing Valve chart 2 $12.00 Price C + $ D + E Configuration Number $35.50 F Locate price in Balancing Valve chart X + Y Section 4 Hydronic Balancing Products All Ports EXTRA OPTIONS + End Config. Inlet x Outlet Price/Configuration Number Box 9 $0 Price No EXTRA Options Needed 0 $70.50 $ 2-inch Extensions 2 Configuration Number $102.00 4-inch Extensions 4 + Customer specific option(s) Y + Quoted on application. Contact Victaulic for pricing and availability. General EXTRA OPTIONS + End Config. Inlet x Outlet Price/Configuration Number Box 10 $0 Price No EXTRA Options Needed 0 $ + Configuration Customer specific option(s) Number Y + Quoted on application. Contact Victaulic for pricing and availability. 100

Hydronic Balancing Products KOIL-KIT Drain Valve Coil Hose Option Union Port Fitting Balancing Valve Bypass Kit Additions Total List Price * Series No. 78Y/78T/ 722 78Y/78T/ 722 Options Hose 1 Hose 2 78U 78U Options 78K/ 786/787/ 722 78K/ 786/787/ 722 Options All Ports Options General Options K9 XXXXX X XX XX XXXX X XXXXX X X X KV Not Applicable (with ATC Valve) XXXXX X XX XX XXXX X XXXXX X X X KB (Bypass) XXXXX X XX XX XXXX X XXXXX X X X XXXXX XX KA (Bypass with XXXXX X XX XX XXXX X XXXXX X X X XXXXX XX ATC Valve) Bypass Valve Bypass Hose $ Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8 Box 9 Box 10 Box 11 Box 12 Box 13 * If ordering a KOIL-KIT Coil Pack with ATC Valve, an additional list price charge of $79.50 will be added to the order. When selecting a Victaulic KOIL-KIT Coil Pack with ATC valve, the outlet of the Series 78U and the inlet of the Series 78K must meet the connection requirements of the ATC valve, otherwise Victaulic will not pre-connect the ATC valve and final assembly will be required in the field. BYPASS OPTION ADDER (Based off drain valve inlet choice): Z\x $36.00; C\v $51.00; 1 $77.00; 1Z\v $224.00; 1Z\x $224.00; 2 $321.00 KOIL-KIT Configuration Example Series 79A with ATC and Bypass Option 78Y C\v x Z\x Fem. x Fem. Z\x x 24 Male x Male Connected 78U Z\x x Z\x Fem. x Male Drain Valve with PT Port 78K Z\x x C\v Male x Fem. 78Y C\v x Z\x Fem. x Male Z\x x Z\x Male x Male Connected 78Y/78T Manual Air 2 No Options Vent Drain Kit Extension Options KA YBFAF M AE AE AFAM D MAMBF F 2 0 YBFAM AD $51.00 + $79.50 137.00 27.00 56.00 56.00 43.00 35.50 126.00 35.50 70.50 0 158.00 52.00 * The list price charge for adding bypass options varies based on the nominal size of the drain valve selected. In this instance, a C\v 78Y was selected, therefore the added charge is $51.00 List price charge of $79.50; added when including an ATC valve with your KOIL-KIT coil pack order. TOTAL PRICE $927.00 Section 4 Hydronic Balancing Products 101

Hydronic Balancing Products Section 4 Hydronic Balancing Products Commonly Ordered Koil-Kit Configurations Series No 78Y/78T/ 722 78Y/78T/ 722 Options Hose 1 Hose 2 78U 78U Options 78K/ 786/787/ 722 78K/ 786/787/ 722 Options All Ports Options General Options KX XXXX X XX XX XXXX X XXXXX X X X XXXXX XX K9 YBSBS 0 0 0 BSAM 0 MAMAF 0 0 0 NO ATC 78Y C\v swt x swt 78U C\v x Z\x swt x male union 78K Z\x male union x fem K9 YAFAF 0 1A 1A AFAM 0 MAMAF 0 0 0 NO ATC 78Y Z\x fem x fem Z\x x 12 male union x fem swivel (unconnected) Z\x x 12 male union x fem swivel (unconnected) 78U Z\x fem x male union 78k Z\x male union x fem K9 YASAS 0 0 0 ASAM 0 MAMAS 0 0 0 NO ATC 78Y Z\x swt x swt 78U swt x male union 78K Z\x male union x swt K9 YBSBS 0 0 0 BSAM 0 MAMBF 0 0 0 NO ATC 78Y C\v swt x swt 78U C\v x Z\x swt x male union 78K Z\x x C\v male union x fem K9 YBSBS 0 0 0 BSAM 0 MAMBS 0 0 0 NO ATC 78Y C\v swt x swt 78U C\v x Z\x swt x male union 78K Z\x x C\v male union x swt K9 YBSBF 0 0 0 BFAM 0 MAMAF 0 0 0 NO ATC 78Y C\v swt x fem 78U C\v x Z\x fem x male union 78K Z\x male union x female K9 YAFAF 0 0 0 AFAM 0 MAMAF 0 0 0 NO ATC 78Y C\v fem x fem 78U Z\x fem x male union 78K Z\x male union x fem K9 YBSBF 0 2D 2D BFAM 0 MAMAF 0 0 0 NO ATC 78Y C\v swt x swt C\v x 12 male union x male swivel (unconnected) C\v x 12 male union x male swivel (unconnected) 78U C\v x Z\x fem x male union 78K Z\x male union x fem K9 YBFBF 0 0 0 BFAM 0 MAMAF 0 0 0 NO ATC 78Y C\v fem x fem 78U C\v x Z\x fem x male union 78K Z\x male union x fem K9 YCSCS 0 0 0 CSAM 0 MAMBF 0 0 0 NO ATC 78Y 1 swt x swt 78U 1 x Z\x swt x male union 78K Z\x x C\v male union x fem Bypass Valve Bypass Hose LIST PRICE $311 $367 $322 $321 $342 $332 $301 $472 $311 $419 Victaulic automatic balancing valves are available as an alternative to manual balancing valves when ordering a Victaulic Koil-Kit Coil Pack. Contact Victaulic for details. 102

Differential Pressure Controllers TA Series 793 Differential Pressure Controller TA Series 794 Differential Pressure Controller TA Series 793 Insulation Kits Hydronic Balancing Products Differential Pressure Controllers TA Series 793 Differential Pressure Controller Threaded End Refer to publication 08.29 TA Series 793 Differential Pressure Controller (1.45-8.70 psi) Differential Pressure Range Nominal Actual Outside Diameter Approx. Wgt. Ea.. Differential Pressure Range psi Series 793 (Threaded) Victaulic Part Number Tour & Andersson Code Z\x 0.840 2.4 1.45 8.70 V-004-793-CBV 52 266-015 $412.50 C\v 1.050 2.6 1.45 8.70 V-006-793-CBV 52 266-020 418.50 1 1.315 2.9 1.45 8.70 V-010-793-CBV 52 266-025 425.00 1Z\v 1.660 5.7 2.90 11.6 V-012-793-CBV 52 266-032 551.00 1Z\x 1.900 6.4 2.90 11.6 V-014-793-CBV 52 266-040 637.00 2 2.375 7.7 2.90 11.6 V-020-793-CBV 52 266-050 757.50 TA Series 794 Differential Pressure Controller Flanged End (Class 150, ASME/ANSI B16.42) Refer to publication 08.29 TA Series 794 Differential Pressure Controller (2.9 11.6 psi) Differential Pressure Range Nominal Actual Outside Diameter Approx. Wgt. Ea.. Differential Pressure Range psi Series 794 (Flanged) Victaulic Part Number Tour & Andersson Code 2Z\x 2.875 46.3 2.9 11.6 V-024-794-116 52 266-065 $3062.00 3 3.500 52.9 2.9 11.6 V-030-794-116 52 266-080 3230.00 4 4.500 72.8 2.9 11.6 V-040-794-116 52 266-090 4334.50 TA Series 794 Differential Pressure Controller (5.8 23.2) psi Differential Pressure Range Nominal Actual Outside Diameter Approx. Wgt. Ea.. Differential Pressure Range psi Series 794 (Flanged) Victaulic Part Number Tour & Andersson Code 2Z\x 2.875 46.3 5.8 23.2 V-024-794-223 52-266-165 $3298.50 3 3.500 52.9 5.8 23.2 V-030-794-223 52-266-180 3532.50 4 4.500 72.8 5.8 23.2 V-040-794-223 52-266-190 4734.50 Section 4 Hydronic Balancing Products TA Series 793 Insulation Kits Refer to publication 08.29 TA Series 793 Insulation Kits Series 793 Insulation Kit Nominal Victaulic Part Number Tour & Andersson Code Z\x 1 P-006-793-INS 52 265-225 $104.50 1Z\v 2 P-012-793-INS 52 265-250 123.50 103

TA Differential Pressure Controller Accessories Hydronic Balancing Products Accessories Refer to publication 08.29 Capillary Tube Capillary Extension Kit TA Differential Pressure Controller Accessories Nominal Description Victaulic Part Code Capillary Pipe and Extension Kit Tour & Andersson Code List Price Capillary Tube P-000-793-001 $96.00 Capillary Extension Kit K-002-793-001 298.00 Setting Tool 3 TA Series 793 P-004-793-KEY 52-265-305 718.00 5 TA Series 794 P-030-794-KEY 52-265-304 704.50 Handwheels Z\x 1 TA Series 793 P-004-793-HDW 189.00 1Z\v 2 TA Series 794 P-012-793-HDW 189.00 Setting Tool TA Series 793 Plastic Z\x 1 TA Series 794 Plastic 1Z\v 2 Section 4 Hydronic Balancing Products 104

Balancing Instruments TA Series 736 TA Link Differential Pressure Sensor Universal Gauge Meter Conversion Kit Series 73M TA CMI Hydronic Balancing Products Instruments TA Series 736 TA Link Differential Pressure Sensor Refer to publication 08.16 TA Series 736 TA Link Differential Pressure Sensor Range psi Victaulic Part Code Tour & Andersson Code List Price 0 6 V-000-736-000 52-010-004 $4024.50 0 15 V-000-736-001 52-010-010 4024.50 Universal Gauge Meter Conversion Kit TA Series 73M TA CMI Refer to publication 08.16 Universal Gauge Meter Conversion Kit Victaulic Part Code Tour & Andersson Code List Price K-000-738-100 $537.00 The Series 738 D.G.M. reads differential pressure in inches of water. The gauge is calibrated from 0 135 in. of H 2 O. The meter comes with a conversion kit. The kit includes 2 probes, necessary fittings, flow wheel and instruction sheet. TA CMI is a computer programmed measuring instrument. It is a hand-held instrument for measuring differential pressure, temperature and flow through balancing valves in hydronic systems. It consists of a sensor unit and an instrument unit that has been programmed with TA valve characteristics, which makes it possible to take a direct reading of flow differential pressures. TA Series 73M TA CMI Victaulic Part Code Tour & Andersson Code List Price V-000-73M-000 52-198-550 $7177.00 Section 4 Hydronic Balancing Products 105

TA Series 734 Scope Balancing Instrument Hydronic Balancing Products TA Series 734 Scope Balancing Instrument Refer to publication 08.16 TA Series 734 Scope Balancing Instrument Victaulic Part Code Tour & Andersson Code List Price V-000-734-000 52-199-014 $18544.00 Section 4 Hydronic Balancing Products 106

SECTION 5 Plain End Couplings and Fittings Plain End Couplings and Fittings 107

Style 99 Roust-A-Bout Coupling Gaskets for Style 99 Couplings Products for Plain End IPS Steel Pipe Products for Plain End IPS Steel Pipe Roust-A-Bout Coupling Style 99 Refer to publication 14.02 Style 99 Grade E or T Gasket Nominal PIPE Outside Diameter Wgt. Ea.. COUPLING COMPLETE With Grade E or T Gasket Painted Galv. Plated Bolt & Nut 1 1.315 1.7 $159.00 $205.50 C\, x 2 1Z\x 1.900 3.6 159.00 205.50 Z\x x 2Z\x 2 2.375 5.3 159.00 205.50 B\, x 3Z\v 2Z\x 2.875 5.7 159.00 205.50 B\, x 3Z\v 3 3.500 8.7 232.50 304.00 C\v x 4Z\v 3Z\x 4.000 10.6 268.50 356.00 C\v x 4Z\v 4 4.500 12.8 268.50 356.50 C\v x 4Z\v 5 5.563 17.3 382.50 508.00 M\, x 5 6 6.625 23.2 466.50 633.00 1 x 6 8 8.625 37.2 823.00 1101.00 M\, x 5 10 10.750 48.2 1068.50 1434.50 M\, x 5 12 12.750 60.0 1341.00 1849.50 1 x 6Z\x 14 14.000 89.0 1841.00 2390.00 1 x 6Z\x 16 16.000 105.0 2519.00 3215.50 1 x 6Z\x 18 18.000 122.4 3360.50 4361.50 1 x 6Z\x Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Section 5 Products for plain End IPS Steel Pipe Gaskets for Style 99 Couplings Nominal Standard Gaskets Standard Grade E or T Grade L Silicone Grade A White Nitrile Grade O Fluoroelastomer 1 * $30.50 $107.00 $96.00 1Z\x * 34.00 160.50 124.50 $360.50 2 42.50 222.50 286.00 422.00 2Z\x 45.50 261.50 287.50 817.50 3 49.50 355.00 911.00 632.50 3Z\x 71.50 + + + 4 71.50 543.00 1210.50 666.00 5 84.50 792.00 1277.00 1428.00 6 103.00 1068.50 1313.00 1971.00 8 134.00 1031.00 + 2727.50 10 172.00 1598.00 + + 12 209.00 1672.00 + + 14 318.00 16 376.50 18 602.00 + Quoted on application. Contact Victaulic for pricing and availability. * Style 77 gasket. 108

Plated Trackhead Bolts and Nuts No(s). 40-P, 42-P and 43-P Adapter Nipples Products for Plain End IPS Steel Pipe Plated Trackhead Bolts and Nuts Plated Trackhead Bolts and Nuts Bolt and Nut C\, x 2 $15.50 Z\x x 2Z\x 16.00 2C\v 16.00 3 16.00 3Z\v 16.00 B\, x 2C\v 19.00 3Z\v 19.00 3Z\x 20.50 4 25.50 5 32.00 Bolt and Nut C\v x 4Z\v $22.50 5 30.00 M\, x 5 39.50 5Z\x 45.50 6Z\x 49.50 1 x 3Z\x 43.00 5 40.00 5Z\x 49.50 6 49.50 6Z\x 52.50 Adapter Nipples Refer to publication 14.04 No. 40-P No. 42-P No. 43-P Adapter Nipples Plain to Threaded, Plain to Beveled, or Plain to Grooved PIPE End to End Wgt. Each No. 40-P Plain to Threaded Steel No. 42-P Plain to Beveled Steel No. 43-P Plain to Grooved Steel Black 1 3 0.9 $45.50 1Z\x 4 0.9 45.50 2 4 1.2 45.50 2Z\x 4 1.9 52.50 3 4 2.5 63.50 4 6 5.4 104.00 6 * 6 9.5 275.50 * This size is available only in No. 42 grooved x beveled and No. 43 grooved x grooved. Section 5 Products for plain End IPS Steel Pipe 109

Plain End Fittings No. 10-P 90 Elbow, No. 11-P 45 Elbow No. 20-P Tee, No. 61-P Bull Plug Products for Plain End IPS Steel Pipe Plain End Fittings Refer to publication 14.04 No. 10-P No. 11-P Plain End Fittings 90 Elbow or 45 Elbow Nominal Weight Each 90 Elbow No. 10-P 45 Elbow No. 11-P Weight Each Painted Galv. Painted Galv. 1 0.6 (d) $263.50 $292.00 0.6 (d) $157.00 $180.50 1Z\x 1.4 312.00 341.50 1.0 234.50 281.00 2 2.9 464.50 512.00 1.4 492.50 605.50 2Z\x 3.9 543.50 604.00 2.3 492.50 605.50 3 6.2 564.00 631.00 4.3 564.00 635.50 3Z\x 7.0 + + 5.5 + + 4 9.9 639.00 703.00 7.0 588.00 651.00 5 20.4 734.50 1473.50 18.0 734.50 864.50 6 20.4 (d) 928.50 1130.00 11.9 (d) 841.50 988.00 8 42.0 1744.00 1971.50 28.5 986.50 1393.00 10 50.0 2220.50 2485.00 41.0 1019.00 1274.00 12 156.0 2470.50 3801.50 57.8 1842.50 2169.50 + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. Plain End Fittings Tee or Bull Plug No. 20-P No. 61-P Nominal Tee No. 20-P Bull Plug No. 61-P Weight Each Painted Galv. Weight Each Electroplated 1 1.0 $294.50 $346.50 0.7 + 1Z\x 1.7 (d) 379.00 435.50 1.2 $265.50 2 3.0 379.00 425.00 2.0 265.50 2Z\x 6.8 494.00 560.00 3.0 265.50 3 9.0 759.50 867.50 4.5 387.50 3Z\x 12.5 + + 6.0 + 4 11.9 1087.50 1360.00 7.5 500.00 5 17.1 1487.50 + 11.5 878.50 6 29.5 (d) 1294.50 1486.00 17.0 1172.00 8 71.5 1866.00 + 29.0 2200.50 10 116.0 + + 48.0 + 12 120.0 3419.50 + 60.0 5908.00 + Quoted on application. Contact Victaulic for pricing and availability. (d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron. Section 5 Products for plain End IPS Steel Pipe 110

No. 33-P Wye, No. 30-P Lateral No. 35-P Cross Products for Plain End IPS Steel Pipe Plain End Fittings Refer to publication 14.04 No. 33-P No. 30-P Plain End Fittings Wye or Lateral Nominal Weight Each Wye No. 33-P Lateral No. 30-P Weight Each Painted Galv. Painted Galv. 1 1.1 + + 3.5 + + 1Z\x 1.8 + + 3.5 $448.00 $527.00 2 2.9 + + 5.1 512.00 622.00 2Z\x 9.0 + + 9.3 589.00 693.00 3 8.5 + + 12.8 699.50 822.00 3Z\x 10.0 + + 20.0 + + 4 14.0 + + 19.0 963.00 1078.50 5 21.6 + + 30.0 1634.00 1940.00 6 31.2 + + 43.3 1685.50 2045.50 8 36.0 + + 92.0 2828.50 3330.50 10 52.0 + + 106.0 2828.00 4946.50 12 81.2 + + 167.0 5398.00 6943.00 + Quoted on application, other sizes available. Plain End Fittings Cross No. 35-P Nominal Cross No. 35-P Weight Each Painted Galv. 1 1.7 + + 1Z\x 3.5 + + 2 5.2 + + 2Z\x 5.4 + + 3 8.5 + + 3Z\x 9.0 + + 4 10.8 + + 5 20.0 + + 6 30.0 + + 8 66.4 + + 10 103.0 + + 12 158.0 + + + Quoted on application, other sizes available. Section 5 Products for plain End IPS Steel Pipe 111

No. 53-P Swaged Nipples No. 25-P Reducing Tee Products for Plain End IPS Steel Pipe Swaged Nipples No. 53-P Refer to publication 14.04 No. 53-P No. 53-P Swaged Nipples Nominal Wgt. Each Electroplated 1Z\x x 1 1.2 + 2 x 1 2.0 + 1Z\x 2.0 + 2Z\x x 1 3.0 + 1Z\x 3.0 + 2 3.0 + 3 x 1 4.5 + 1Z\x 4.5 + 2 4.5 + 2Z\x 4.5 + 3Z\x x 3 6.8 + 4 x 1 7.5 + 1Z\x 7.5 + 2 7.5 + 2Z\x 7.5 + 3 7.5 + 3Z\x 7.5 + 5 x 2 11.5 + 3 11.5 + 4 11.5 + Nominal Wgt. Each Electroplated 6 x 1 17.0 + 1Z\x 16.0 + 2 16.0 + 2Z\x 17.0 + 3 17.0 + 3Z\x 17.0 + 4 17.0 + 5 17.5 + 8 x 3 29.0 + 4 29.0 + 5 29.0 + 6 29.0 + 10 x 3 1.2 + 4 2.0 + 6 2.0 + 8 3.0 + 12 x 6 3.0 + 8 3.0 + 10 4.5 + + Quoted on application, other sizes available. Section 5 Products for plain End IPS Steel Pipe Reducing Tees No. 25-P Refer to publication 14.04 No. 25-P No. 25-P Reducing Tee Nominal Run x Branch Wgt. Each Reducing Tee No. 25-P Painted Galv. 1Z\x x 1Z\x x 1 2.2 + + 2 x 2 x 1 2.9 + + 1Z\x 3.1 + + 3 x 3 x 1 6.7 + + 1Z\x 6.9 $324.00 $399.00 2 7.1 + 755.00 4 x 4 x 1 10.9 + + 1Z\x 11.1 + + 2 11.3 469.50 + 2Z\x 11.6 483.50 + 3 11.9 483.50 + 6 x 6 x 2 24.7 + + 3 25.4 + + 4 26.2 + 1059.00 8 x 8 x 2 42.0 + + 3 44.0 + + 4 46.0 935.50 + 5 48.0 + + 6 50.0 1096.00 + 10 x 10 x 4 74.0 + + 6 78.0 + + 8 86.0 + + 12 x 12 x 6 112.0 + + 8 118.0 + + 10 130.0 + + + Quoted on application. Contact Victaulic for pricing and availability. 112

SECTION 6 Vic-Press System, for Schedule 10S Stainless Steel Pipe Vic-Press System for Schedule 10S Stainless Steel Pipe 113

Vic-Press 304 Seal Selection Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe Vic-Press System for Type 304 Schedule 10S Stainless Steel Pipe Section 6 Vic-Press for Schedule 10S The Victaulic Vic-Press System for joining Schedule 10S Type 304 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x 2 /15 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press Schedule 10S products are designed for pressure service up to 500 psi/3450 kpa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimensioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service. The Vic-Press Schedule 10S System requires no flame or arc as with welding, and no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling or fitting is pressed onto the pipe in seconds. The Vic-Press Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9. Vic-Press Schedule 10S Type 304 couplings and fittings are ANSI/NSF 61 Annex G Certified for cold (+86 F/+30 C) and hot (+180 F/+82 C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kpa service for above ground sprinkler systems. Seal Selection (Unless specified otherwise, Grade H seals will be supplied) GRADE TEMP. RANGE COMPOUND H 20 F E 30 F O +20 F to +210 F HNBR Orange Two Stripes to +250 F EPDM Green Stripe to +300 F COLOR CODE STANDARD SEAL * GENERAL SERVICE RECOMMENDATIONS Recommended for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, engine oil, transmission oil. ANSI/NSF 61 Certified for potable water up to +180 F/+82 C. OPTIONAL SEALS Contact Victaulic for delivery time Fluoroelastomer Blue Stripe Recommended for hot water service, dilute acids, oil-free air, chemical services. Not recommended for petroleum services. Not recommended for steam services. ANSI/NSF Certified for potable water up to +180 F/+82 C. Recommended for oxidizing acids. petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons. Not recommended for steam services. * Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations. WARNING Before attempting to install any Vic-Press Schedule 10S System products, carefully read and fully understand the Vic-Press Schedule 10S Products Installation Instructions (I-P500) and the operating and maintenance manual supplied with the tool. Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure. 114

Style P500 Loose Seals Style P597 Standard Coupling Style P596 Male Adapter Threaded Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe Style P500 Loose Seals Refer to publication 18.12 Style P597 Standard Coupling (P X P) Refer to publication 18.12 Style P500 Spare Parts Loose Seals Nominal Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x $6.00 $18.50 C\v 6.50 21.00 1 8.00 24.00 1Z\x 11.00 49.00 2 15.00 65.00 Specify choice clearly on order. Style P597 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.2 $43.50 $59.50 C\v 0.3 47.50 66.50 1 0.5 54.00 133.00 1Z\x 0.7 73.00 124.00 2 1.0 96.00 163.00 Specify choice clearly on order. Section 6 Vic-Press for Schedule 10S Style P596 Male Adapter Threaded (P X M) Refer to publication 18.12 Style P596 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x x Z\x 0.3 $79.50 $87.50 C\v x Z\x 0.4 82.50 90.50 C\v 0.4 82.50 92.00 1 0.5 95.50 107.50 1 x C\v 0.5 98.00 107.50 1 0.6 98.00 133.00 1Z\x x C\v 0.8 183.00 192.50 1Z\x 1.0 164.00 218.00 2 x 2 1.4 202.00 247.00 Specify choice clearly on order. 115

Series P569 Type 316 Stainless Steel Ball Valve Series P589 Brass Body Ball Valve Style P586 90 Elbow Short Tangent Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe Series P569 For Series P569 pricing, please refer to Series P569 in the Type 316 section. Section 6 Vic-Press for Schedule 10S Type 316 Stainless Steel Ball Valve with Locking Handle Refer to publication 18.12 P x P P x G G x G Series P589 Vic-Press Schedule 10S System Brass Body Ball Valve Stainless Steel Vic-Press Type 304 Schedule 10S Ends Refer to publication 18.12 Series P589 Vic-Press Schedule 10S Ends With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each End to End Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 1.0 9.03 $259.50 $275.50 C\v 1.6 9.12 285.50 304.50 1 2.8 10.11 342.00 366.00 1Z\x 4.7 11.18 479.50 549.50 2 6.9 12.69 587.00 677.00 Specify choice clearly on order. Style P586 90 Elbow Short Tangent (P X P) Refer to publication 18.12 Style P586 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.3 $81.50 $97.50 C\v 0.4 92.00 111.00 1 0.8 109.00 133.00 1Z\x 1.4 216.00 286.00 2 2.0 276.50 366.50 Specify choice clearly on order. 116

Style P542 90 Street Elbow Style P591 45 Elbow Style P543 45 Street Elbow Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe Style P542 90 Street Elbow (P X T) Refer to publication 18.12 Style P591 45 Elbow (P X P) Refer to publication 18.12 Style P542 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.3 $81.50 $89.50 C\v 0.4 92.00 101.50 1 0.7 109.00 121.00 1Z\x 1.4 216.00 162.00 2 2.0 276.50 321.00 Specify choice clearly on order. Style P591 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.2 $72.50 $88.50 C\v 0.4 80.00 99.00 1 0.8 95.50 133.00 1Z\x 1.7 188.00 258.00 2 2.5 241.00 331.00 Specify choice clearly on order. Section 6 Vic-Press for Schedule 10S Style P543 45 Street Elbow (P X T) Refer to publication 18.12 Style P543 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.2 $72.50 $80.50 C\v 0.4 80.00 89.50 1 0.8 95.50 107.50 1Z\x 1.7 188.00 162.00 2 2.5 241.00 286.00 Specify choice clearly on order. 117

Style P592 Tee Style P593 Tee Reducing Branch Style P588 Tee Reducing Branch Threaded Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe Section 6 Vic-Press for Schedule 10S Style P592 Tee (P X P X P) Refer to publication 18.12 Style P593 Tee Reducing Branch (P X P X P) Refer to publication 18.12 Style P592 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.4 $148.50 $172.50 C\v 0.5 164.00 192.50 1 0.9 175.50 131.00 1Z\x 1.5 224.50 329.50 2 2.1 280.00 415.00 Specify choice clearly on order. Style P593 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal C\v x C\v x Z\x 0.5 $165.50 $192.50 1 x 1 x Z\x 0.8 171.00 203.00 C\v 0.8 174.50 208.00 1Z\x x 1Z\x x Z\x 1.2 206.00 284.00 C\v 1.3 208.00 287.50 1 1.4 209.00 291.00 2 x 2 x Z\x 1.7 268.50 366.50 C\v 1.7 272.50 372.00 1 1.8 280.50 382.50 1Z\x 2.0 309.00 434.00 Specify choice clearly on order. Style P588 Tee Reducing Branch Threaded (P X P X F) Refer to publication 18.12 Style P588 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x x Z\x x Z\x 0.4 $224.50 $240.50 C\v x C\v x Z\x 0.5 243.00 262.00 C\v 0.6 246.00 265.00 1 x 1 x Z\x 0.9 247.50 271.50 C\v 0.9 248.50 272.50 1 1.1 269.50 131.00 1Z\x x 1Z\x x Z\x 1.4 280.50 350.50 C\v 1.5 283.50 353.50 1 1.5 309.50 379.50 2 x 2 x Z\x 1.7 319.50 409.50 C\v 1.7 323.00 413.00 1 2.0 346.00 436.00 Specify choice clearly on order. 118

Style P594 Concentric Reducer Style P595 Flange Adapter Style P565 Flange Adapter Style P587 Transition Nipple Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe Style P594 Concentric Reducer (P X P) Refer to publication 18.12 Style P594 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal C\v x Z\x 0.5 $134.50 $152.00 1 x Z\x 0.6 181.00 201.00 C\v 0.7 143.50 165.00 1Z\x x Z\x 0.9 254.00 297.00 C\v 1.0 238.50 283.00 1 1.1 132.50 179.50 2 x Z\x 1.2 472.00 525.00 C\v 1.3 212.50 267.00 1 1.4 164.00 221.00 1Z\x 1.6 164.00 244.00 Specify choice clearly on order. Section 6 Vic-Press for Schedule 10S Style P595 Flange Adapter (P X L) Refer to publication 18.12 Style P595 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 2.2 $607.50 $615.50 C\v 2.3 625.00 634.50 1 2.8 634.50 133.00 1Z\x 3.6 773.50 808.50 2 5.8 861.00 906.00 Specify choice clearly on order. Style P565 Flange Adapter (Van Stone type) (P X L) Refer to publication 18.12 Style P565 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 2.4 $212.00 $220.00 C\v 2.5 212.00 221.50 1 3.0 285.50 185.00 1Z\x 4.1 314.50 349.50 2 6.8 337.50 382.50 Specify choice clearly on order. Style P587 Transition Nipple (T X G) Refer to publication 18.12 Style P587 Nominal Weight Each Unit End to End Price Each C\v 0.3 4 $111.50 1 0.5 4 115.00 1Z\x 0.7 4 144.00 2 0.9 4 151.50 Specify choice clearly on order. 119

Style P584 Threaded Union Style P599 Female Adapter Threaded Style P561 Adapter Style P540 End Cap Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe Section 6 Vic-Press for Schedule 10S Style P584 Threaded Union ** (P X P) Refer to publication 18.12 Style P584 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 3.0 $499.00 $515.00 C\v 3.7 566.00 585.00 1 4.3 689.00 713.00 1Z\x 6.0 1178.00 1248.00 2 6.8 1453.00 1543.00 ** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For standard ductile iron couplings, stainless steel couplings and gaskets refer to Main Price List. Specify choice clearly on order. Style P599 Female Adapter Threaded (P X F) Refer to publication 18.12 Style P599 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x x Z\x 0.3 $96.50 $104.50 C\v x Z\x 0.3 97.00 106.50 C\v 0.4 99.50 109.00 1 x Z\x 0.7 105.00 117.00 C\v 0.6 111.50 123.50 1 0.6 119.00 131.00 1Z\x x 1 1.0 188.00 223.00 1Z\x 1.0 236.00 271.00 2 x 1Z\x 1.3 233.00 278.00 2 1.2 256.50 301.50 Specify choice clearly on order. Style P561 Weld Adapter (P X T) Refer to publication 18.12 Style P561 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.3 $79.50 $79.50 C\v 0.4 60.00 91.00 1 0.6 98.00 110.00 1Z\x 0.9 171.00 206.00 2 1.4 202.00 247.00 Specify choice clearly on order. Style P540 End Cap Refer to publication 18.12 Style P540 Nominal Weight Each Price Each Z\x 0.1 $102.00 C\v 0.1 113.50 1 0.3 121.00 1Z\x 0.4 154.50 2 0.5 192.50 120

PFT510 Vic-Press Tool Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe PFT510 Vic-Press 10S Tool The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 12 Pipe Preparation Tools for prices and where to call for purchase informaiton. NOTE: Victaulic Tool Discount will apply. PFT510 Tool Section 6 Vic-Press for Schedule 10S 121

Vic-Press 316 Seal Selection Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Vic-Press System for Type 316 Schedule 10S Stainless Steel Pipe Section 6 Vic-Press for Schedule 10S The Victaulic Vic-Press System for joining Schedule 10S Type 316 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x 2 /15 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press Schedule 10S products are designed for pressure service up to 500 psi/3450 kpa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimensioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service. The Vic-Press Schedule 10S System eliminates the need for flame as in welding, no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling is pressed onto the pipe and fitting in seconds. The Vic-Press Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9. Vic-Press Type 316 couplings and fittings are recommended for varying concentrations of hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, as well as automotive fluids such as engine oil and transmission fluid within the temperature range of 20 F to +210 F/ 29 C to +98 C. UL Classified in accordance with ANSI/NSF 61 Annex G for cold (+86 F/+30 C) and hot (+180 F/+82 C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kpa service for above ground sprinkler systems. Seal Selection (Unless specified otherwise Grade H seals will be supplied) GRADE TEMP. RANGE COMPOUND H 20 F E 30 F O +20 F to +210 F HNBR Orange Two Stripes to +250 F EPDM Green Stripe to +300 F COLOR CODE STANDARD SEAL * GENERAL SERVICE RECOMMENDATIONS Recommended for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, engine oil, transmission oil. ANSI/NSF 61 Certified for potable water up to +180 F/+82 C. OPTIONAL SEALS Contact Victaulic for delivery time Fluoroelastomer Blue Stripe Recommended for hot water service, dilute acids, oil-free air, chemical services. Not recommended for petroleum services. Not recommended for steam services. ANSI/NSF Certified for potable water up to +180 F/+82 C. Recommended for oxidizing acids. petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons. Not recommended for steam services. * Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations. WARNING Before attempting to install any Vic-Press Schedule 10S System products, carefully read and fully understand the Vic-Press Schedule 10S Products Installation Instructions (I-P500) and the operating and maintenance manual supplied with the tool. Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure. 122

Style P500 Loose Seals Style P507 Standard Coupling Style P576 Male Adapter Threaded Style P508 Slip Coupling Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Style P500 Loose Seals Refer to publication 18.11 Style P507 Standard Coupling (P X P) Refer to publication 18.11 Style P500 Spare Parts Loose Seals Nominal Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x $6.00 $18.50 C\v 6.50 21.00 1 8.00 24.00 1Z\x 11.00 49.00 2 15.00 65.00 Specify choice clearly on order. Style P507 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.2 $48.50 $59.00 C\v 0.3 55.00 74.00 1 0.5 62.00 86.00 1Z\x 0.7 85.50 131.00 2 1.0 125.00 215.00 Specify choice clearly on order. Section 6 Vic-Press for Schedule 10S Style P576 Male Adapter Threaded (P X M) Refer to publication 18.11 Style P576 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x x Z\x 0.3 $82.00 $90.00 C\v x Z\x 0.4 85.50 95.00 C\v 0.4 85.50 94.50 1 0.5 98.50 108.00 1 x C\v 0.5 101.00 113.00 1 0.6 101.00 113.00 1Z\x x C\v 0.8 185.00 220.00 1Z\x 1.0 210.00 245.00 2 x 2 1.4 272.50 317.50 Specify choice clearly on order. Style P508 Slip Coupling (P X P) Refer to publication 18.11 Style P508 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.3 $57.00 $73.00 C\v 0.4 62.00 81.00 1 0.7 71.00 95.00 1Z\x 1.1 92.00 162.00 2 1.6 117.50 207.50 Specify choice clearly on order. 123

Series P569 Stainless Steel Ball Valve Series P569 Repair Kits Series P589 Brass Body Ball Valve Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Section 6 Vic-Press for Schedule 10S Series P569 Type 316 Stainless Steel Ball Valve with Locking Handle Refer to publication 18.11 P x P P x G G x G Series P569 Vic-Press Schedule 10S X Vic-Press Schedule 10S (P x P) Nominal Weight Each End to End Standard Grade H HNBR or Grade E EPDM Seal Vic-Press x Vic-Press (P X P) Optional Grade O Fluoroelastomer Seal Z\x 1.5 8.26 $358.00 $374.00 C\v 2.4 8.36 416.00 435.00 1 3.6 8.77 500.50 524.50 1Z\x 6.9 9.76 777.00 847.00 2 9.5 9.83 1042.00 + Series P569 Vic-Press Schedule 10S x Grooved (P x G) Nominal Weight Each End to End Standard Grade H HNBR or Grade E EPDM Seal Vic-Press x Grooved (P X G) Optional Grade O Fluoroelastomer Seal C\v 2.4 8.54 $416.00 $435.00 1 3.6 8.75 500.50 524.50 1Z\x 6.9 10.9 777.00 847.00 2 9.5 12.11 1042.00 + Series P569 Grooved x Grooved (G x G) Nominal Weight Each End to End Grooved x Grooved (G X G) C\v 2.4 8.44 $361.50 1 3.6 8.76 438.50 1Z\x 6.9 10.32 692.00 2 9.5 10.92 917.50 + Quoted on application. Contact Victaulic for pricing and availability. Series P569 Repair Kits Refer to publication 18.11 Series P569 Repair Kits Nominal Repair Kit Type 316 Stainless Steel Ball Stem Z\x $42.00 $62.50 + C\v 43.00 60.00 + 1 54.50 75.00 + 1Z\x 114.00 162.50 + 2 170.50 277.00 + + Quoted on application. Contact Victaulic for pricing and availability. Series P589 Vic-Press Schedule 10S System Brass Body Ball Valve Stainless Steel Vic-Press Type 316 Schedule 10S Ends Refer to publication 18.11 Series P589 Vic-Press Schedule 10S Ends With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each End to End Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 1.0 9.03 $265.00 $281.00 C\v 1.6 9.12 290.50 309.50 1 2.8 10.11 348.50 372.50 1Z\x 4.7 11.18 572.00 642.00 2 6.9 12.69 729.00 819.00 Specify choice clearly on order. 124

Style P568 90 Elbow Short Tangent Style P562 90 Street Elbow Style P571 45 Elbow Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Style P568 90 Elbow Short Tangent (P X P) Refer to publication 18.11 Style P568 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each lbs Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.3 $156.50 $172.50 C\v 0.4 176.50 212.00 1 0.8 198.00 238.00 1Z\x 1.4 267.50 321.00 2 2.0 367.50 441.00 Specify choice clearly on order. Section 6 Vic-Press for Schedule 10S Style P562 90 Street Elbow (P X T) Refer to publication 18.11 Style P562 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each lbs Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.3 $156.50 $164.50 C\v 0.4 176.50 186.00 1 0.7 198.00 110.00 1Z\x 1.4 267.50 206.00 2 2.0 367.50 412.50 Specify choice clearly on order. Style P571 45 Elbow (P X P) Refer to publication 18.11 Style P571 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each lbs Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.2 $143.50 $159.50 C\v 0.4 154.50 173.50 1 0.8 173.00 197.00 1Z\x 1.7 232.50 302.50 2 2.5 319.00 409.00 Specify choice clearly on order. 125

Style P563 45 Street Elbow Style P572 Tee Style P573 Tee Reducing Branch Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Section 6 Vic-Press for Schedule 10S Style P563 45 Street Elbow (P X T) Refer to publication 18.11 Style P563 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each lbs Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.2 $143.50 $151.50 C\v 0.4 154.50 164.00 1 0.8 173.00 185.00 1Z\x 1.7 232.50 267.50 2 2.5 319.00 364.00 Specify choice clearly on order. Style P572 Tee (P X P X P) Refer to publication 18.11 Style P572 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 0.4 $338.50 $362.50 C\v 0.5 366.00 394.50 1 0.9 384.00 420.00 1Z\x 1.5 452.50 557.50 2 2.1 558.00 693.00 Specify choice clearly on order. Style P573 Tee Reducing Branch (P X P X P) Refer to publication 18.11 Style P573 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal C\v x C\v x Z\x 0.5 $386.50 $413.50 1 x 1 x Z\x 0.8 420.00 452.00 C\v 0.8 437.00 470.50 1Z\x x 1Z\x x Z\x 1.2 617.00 695.00 C\v 1.3 622.50 702.00 1 1.4 637.50 719.50 2 x 2 x Z\x 1.7 721.50 819.50 C\v 1.7 743.50 843.00 1 1.8 828.00 930.00 1Z\x 2.0 850.00 975.00 Specify choice clearly on order. 126

Style P578 Tee Reducing Branch Threaded Style P574 Concentric Reducer Style P575 Flange Adapter Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Style P578 Tee Reducing Branch Threaded (P X P X F) Refer to publication 18.11 Style P578 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x x Z\x x Z\x 0.4 $471.50 $487.00 C\v x C\v x Z\x 0.5 523.00 542.00 C\v 0.6 536.50 555.50 1 x 1 x Z\x 0.9 573.00 597.00 C\v 0.9 583.50 607.50 1 1.1 627.50 651.50 1Z\x x 1Z\x x Z\x 1.4 685.50 755.50 C\v 1.5 710.00 780.00 1 1.5 738.50 808.50 2 x 2 x Z\x 1.7 756.00 846.00 C\v 1.7 783.50 873.50 1 2.0 830.50 920.50 Specify choice clearly on order. Section 6 Vic-Press for Schedule 10S Style P574 Concentric Reducer (P X P) Refer to publication 18.11 Style P574 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal C\v x Z\x 0.5 $157.50 $175.00 1 x Z\x 0.6 201.00 221.00 C\v 0.7 148.50 170.00 1Z\x x Z\x 0.9 298.00 341.00 C\v 1.0 195.50 240.00 1 1.1 137.50 184.50 2 x Z\x 1.2 516.00 569.00 C\v 1.3 225.00 279.50 1 1.4 169.00 226.00 1Z\x 1.6 169.00 249.00 Specify choice clearly on order. Style P575 Flange Adapter (P X L) Refer to publication 18.11 Style P575 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 2.2 $616.00 $624.00 C\v 2.3 627.50 637.00 1 2.8 642.50 654.50 1Z\x 3.6 779.00 814.00 2 5.8 865.50 910.50 Specify choice clearly on order. 127

Style P566 Flange Adapter Style P577 Adapter Nipple Style P585 Threaded Union Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Section 6 Vic-Press for Schedule 10S Style P566 Flange Adapter (Van Stone type) (P X L) Refer to publication 18.11 Style P566 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 2.4 $212.00 $220.00 C\v 2.5 212.00 221.00 1 3.0 285.50 297.00 1Z\x 4.1 314.50 349.50 2 6.8 337.50 382.50 Specify choice clearly on order. Style P577 Adapter Nipple (T X G) Refer to publication 18.11 Style P577 Nominal Weight Each Price Each C\v 0.3 $114.50 1 0.5 119.00 1Z\x 0.7 149.00 2 0.9 155.00 Style P585 Threaded Union ** (P X P) Refer to publication 18.11 Style P585 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x 3.0 $510.00 $526.00 C\v 3.7 588.00 607.00 1 4.3 718.50 742.50 1Z\x 6.0 1189.00 1259.00 2 6.8 1570.50 1660.50 ** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For standard ductile iron couplings, stainless steel couplings and gaskets refer to Main Price List. Specify choice clearly on order. 128

Style P579 Female Adapter Threaded Style P560 End Cap PFT510 Vic-Press Tool Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe Style P579 Female Adapter Threaded (P X F) Refer to publication 18.11 Style P579 With Standard Grade H HNBR Seal or Optional Grade E Seal Nominal Weight Each Standard Grade H HNBR or Grade E EPDM Seal Optional Grade O Fluoroelastomer Seal Z\x x Z\x 0.3 $108.50 $116.50 C\v x Z\x 0.3 113.00 122.50 C\v 0.4 115.00 124.50 1 x Z\x 0.7 120.50 132.50 C\v 0.6 127.50 139.50 1 0.6 134.50 651.50 1Z\x x 1 1.0 225.00 260.00 1Z\v 0.8 225.00 260.00 1Z\x 1.0 282.00 317.00 2 x 1Z\v 1.1 279.50 324.50 1Z\x 1.3 279.50 324.50 2 1.2 306.50 351.50 Specify choice clearly on order. Section 6 Vic-Press for Schedule 10S P560 End Cap Refer to publication 18.11 Style P560 End Cap Nominal Weight Each Price Each Z\x 0.1 $233.50 C\v 0.1 252.00 1 0.3 265.00 1Z\x 0.4 312.00 2 0.5 384.50 PFT510 Vic-Press 10S Tool The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 12 Pipe Preparation Tools for prices and where to call for purchase informaiton. NOTE: Victaulic Tool Discount will apply. PFT510 Tool 129

130

SECTION 8 HDPE Products HDPE Products 131

Style 995 HDPE Coupling Products for HDPE Plastic Pipe Products for Plain End HDPE Plastic Pipe (See Section 2 - for Style 920/920N Mechanical-T Outlets.) HDPE Coupling * Style 995N Refer to publication 19.02 Style 995 Grade E or T Gasket Nominal PIPE Outside Diameter Weight Each COUPLING COMPLETE With Grade E or T Gasket Painted Plated Grade E or T Gasket Only Plated Bolt & Nut 2 2.375 3.5 $402.00 $484.00 $42.50 Z\x x 3 3 3.500 7.7 479.00 568.50 49.50 Z\x x 3Z\v 4 4.500 11.6 526.50 + 71.50 Z\x x 3Z\v 5 5.563 15.0 627.00 + 84.50 B\, x 4 6 6.625 16.4 732.00 872.50 103.00 B\, x 4 8 8.625 24.9 858.00 1034.00 134.00 B\, x 4Z\v 10 10.750 37.4 986.50 1234.50 172.00 C\v x 6Z\v 12 12.750 47.8 1136.50 1427.00 209.00 M\, x 6Z\x 14 14.000 81.0 3212.50 + 318.00 1 x 7 # 16 16.000 100.0 4286.50 + 376.50 1 x 7 # 18 18.000 127.0 5252.50 + 394.50 1 x 7 # 20 20.000 142.0 7132.00 + 426.50 1 x 7 # Section 7 Products for Plain End HDPE Plastic Pipe + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. * Coupling for High Density Polyethylene Pipe. Style 99 gaskets fit Style 995 couplings up to 12. NOTE: See Spare Parts Section for spare part prices. Style 995 HDPE Coupling Kits Includes Plated Bolt and Nut, hardened washer and instruction sheet 2 $83.50 3 83.50 4 83.50 5 88.00 6 88.00 8 88.00 10 91.50 12 + + Quoted on application. Contact Victaulic for pricing and availability. 132

Style 994 Flange Adapter for HDPE Pipe Style 997 HDPE-to-Steel Transition Coupling Style 171 Composite Flexible Coupling Products for HDPE Plastic Pipe Flange Adapter for HDPE Pipe Style 994 Refer to publication 19.04 Style 994 Grade E or T Gasket Nominal PIPE Outside Diameter HDPE FLANGE COMPLETE With Grade E or T Gasket Grade E or T Gasket Weight Each 4 4.500 12.5 $614.50 $149.50 6 6.625 17.3 864.00 152.50 8 8.625 30.8 1011.50 156.00 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. HDPE Flange has ductile iron housing. Standard flange bolts, for ANSI Class 125 or 150 mating flanges must be supplied by the installer. Transition Coupling (HDPE to steel) Style 997 Refer to publication 19.03 Style 997 Grade E or T Gasket Nominal PIPE Weight Each COUPLING COMPLETE With Grade E or T Gasket Painted Plated Grade E EPDM or Grade T Nitrile Plated Bolt & Nut Outside Diameter Gasket Only 2 2.375 3.0 $433.00 $479.00 $34.00 C\, x 2 3 3.500 6.6 507.00 587.50 43.00 Z\x x 2C\v 4 4.500 8.7 592.00 694.50 54.00 Z\x x 2C\v 5 5.563 11.5 677.50 + 69.50 B\, x 3Z\v 6 6.625 14.8 813.00 977.00 75.00 B\, x 3Z\v 8 8.625 21.7 935.50 1164.50 102.50 B\, x 3Z\v 10 10.750 34.3 1290.50 + 128.50 M\, x 5Z\x 12 12.750 37.5 1475.50 + 149.50 M\, x 5Z\x + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. Style 77 gaskets fit Style 997 couplings. Section 7 Products for Plain End HDPE Plastic Pipe 133

134

SECTION 9 Copper Connection Products Copper Products 135

Style 607 QuickVic Rigid Coupling for Copper Style 622 Copper Mechanical-T Bolted Branch Outlet Copper Connection for Grooved Copper Tubing The Copper Connection Grooved Piping System Gasket Selection Please see Gasket Selection Guide or publication 05.01 for available gasket compounds and service recommendations. QuickVic Rigid Coupling for Copper Style 607 Refer to publication 22.13 Style 607 Grade EHP Gasket PIPE Approximate Weight Each COUPLING COMPLETE With EHP Gasket SPARE PARTS Nominal EHP Gasket 2 1.9 $49.50 $40.50 2Z\x 2.1 56.00 44.00 3 3.0 62.50 46.50 4 3.3 94.00 68.00 5 5.5 159.00 112.50 6 5.8 209.50 147.50 8 7.7 325.00 230.00 NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing. Copper Mechanical-T Bolted Branch Outlet Style 622 Refer to publication 22.12 Style 622 Grade E EPDM Gasket Run x Branch Approximate Weight Each COMPLETE MECHANICAL-T With Grade E Gasket Nominal 2Z\x x C\v 3.1 $189.50 1 3.2 216.50 1Z\x 4.1 267.50 3 x C\v 3.4 211.00 1 3.6 225.50 1Z\x 4.5 281.00 4 x C\v 3.3 238.50 1 4.0 252.00 1Z\x 5.0 305.00 Section 8 Copper Connection Grooved Piping System 136

Style 622 Copper Mechanical-T Cross Style 641 Copper Vic-Flange Adapter Copper Connection for Grooved Copper Tubing Copper Mechanical-T Cross Style 622 Refer to publication 22.12 Style 622 Grade E EPDM Gasket Run x Branch Approximate Weight Each COMPLETE MECHANICAL-T With Grade E Gasket Nominal 2Z\x x C\v 4.2 $347.00 1 4.4 411.50 1Z\x 6.2 529.00 3 x C\v 4.4 368.50 1 4.8 426.50 1Z\x 6.6 555.00 4 x C\v 4.5 447.00 1 5.4 475.50 1Z\x 7.4 590.00 Copper Connection Vic-Flange Adapters Style 641 To connect grooved copper to flanged equipment Refer to publication 22.03 Style 641 Grade E or T Gasket Nominal PIPE Outside Diameter VIC-FLANGE ADAPTER COMPLETE With Grade E Gasket Weight Each Painted Gasket SPARE PARTS Vic-Flange Washers 2 2.125 3.8 $380.00 $32.50 $51.50 2Z\x 2.625 4.7 395.50 36.50 55.50 3 3.125 5.4 414.50 39.50 60.00 4 4.125 7.7 454.50 49.50 94.50 5 5.125 9.3 611.00 60.50 103.00 6 6.125 10.3 665.00 69.50 117.00 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. Vic-Flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Vic-Flange adapter is otherwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a phenolic (Type F) Flange Washer be inserted between the Vic-Flange adapter and the mating flange to provide the necessary sealing surface. Typical applications where a Vic-Flange Washer should be used are: 1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange and then the flange washer is inserted between the Vic-Flange adapter and the flange gasket. 2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Vic-Flange adapter. 3. When mating to a rubber faced flange: the flange washer is placed between the Vic-Flange adapters and the rubber faced flange. 4. When mating C.I. flanges to IPS flanges: the flange washer is placed between the two Vic-Flange adapters. If one flange is not a Vic-Flange adapter (e.g., flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Vic-Flange adapter. 5. When mating to components (valves, strainer, etc.) where the component flange face has an insert: follow the same arrangement as in #1 above. Section 8 Copper Connection Grooved Piping System 137

No. 610 90 Elbow, No. 611 45 Elbow No. 620 Tee, No. 660 Cap Reducers No. 650 Concentric Reducer Groove x Groove Copper Connection for Grooved Copper Tubing Copper Connection Fittings Refer to publication 22.04 No. 610 No. 611 Copper Fittings 90 Elbow or 45 Elbow Nominal Weight Each 90 ELBOW No. 610 Weight Each 45 ELBOW No. 611 2 0.9 $87.50 0.8 $87.50 2Z\x 1.3 94.50 1.1 94.50 3 4.1 133.00 1.6 133.00 4 6.7 306.00 3.4 306.00 5 15.0 869.00 10.0 869.00 6 20.0 1387.00 13.0 1387.00 8 26.0 2605.00 15.6 2605.00 Copper Connection Fittings Refer to publication 22.04 No. 620 No. 660 Copper Fittings Tee or Cap Nominal Weight Each TEE No. 620 Weight Each CAP No. 660 2 1.1 $144.00 1.2 $60.50 2Z\x 1.8 153.00 1.4 89.50 3 3.2 227.50 1.4 111.50 4 6.1 500.00 2.4 167.50 5 18.5 1399.50 3.5 188.50 6 25.5 1729.50 4.2 342.00 8 45.0 3089.00 Section 8 Copper Connection Grooved Piping System Copper Connection Concentric Reducer No. 650 Refer to publication 22.04 No. 650 Grooved X Groove Nominal Weight Each End to End No. 650 Grooved x Grooved 2Z\x x 2 1.00 3.13 $126.00 3 x 2 0.95 3.38 126.00 2Z\x 1.03 3.13 126.00 4 x 2 1.65 3.88 258.00 2Z\x 1.95 3.63 258.00 3 2.02 3.38 258.00 5 x 3 6.30 3.88 726.50 4 6.30 3.38 726.50 6 x 3 6.40 4.38 786.50 4 6.50 3.88 786.50 5 6.70 3.38 786.50 8 x 6 10.00 5.00 1380.50 138

No. 652 Concentric Reducer Grooved x Cup No. 625 Reducing Tee Grooved x Groove Copper Connection for Grooved Copper Tubing Copper Connection Concentric Reducer No. 652 Refer to publication 22.04 No. 652 Grooved X Cup Nominal Weight Each End to End Cup No. 652 Grooved x Cup 2 x 1 0.50 2.70 0.91 $104.00 1Z\v 0.45 3.00 0.97 104.00 1Z\x 0.45 2.94 1.09 104.00 2Z\x x 1 0.78 3.25 0.91 127.50 1Z\v 0.60 3.52 0.97 127.50 1Z\x 0.65 3.45 1.09 127.50 2 0.65 3.30 1.34 127.50 3 x 1Z\x 1.06 3.68 1.09 158.50 2 0.99 4.10 1.34 158.50 4 x 2 1.95 4.75 1.34 294.50 Copper Connection Reducing Tee No. 625 Refer to publication 22.04 No. 625 Grooved X Groove Nominal Weight Each No.625 Grooved x Grooved 2Z\x x 2 1.58 $228.00 3 x 2 2.14 293.50 2Z\x 2.43 387.50 4 x 2 5.25 657.00 2Z\x 5.75 657.00 3 6.25 657.00 5 x 3 5.41 2006.00 4 8.75 2006.00 6 x 2Z\x 6.66 2449.50 3 8.12 2449.50 4 9.75 2449.50 5 11.25 2449.50 Dielectric Waterway Transition Fittings For copper tube CTS to carbon steel IPS Connections. See page Section 1 Grooved IPS Pipe Fittings. Section 8 Copper Connection Grooved Piping System 139

No. 626 Reducing Tee Grooved x Cup Copper Connection for Grooved Copper Tubing Copper Connection Reducing Tee No. 626 Refer to publication 22.04 No. 626 Grooved X Cup Nominal Weight Each No. 626 Grooved x Grooved x Cup 2 x C\v 0.75 $184.50 1 0.81 184.50 1Z\v 0.85 184.50 1Z\x 0.87 184.50 2Z\x x C\v 1.00 234.50 1 1.17 229.00 1Z\v 1.23 229.00 1Z\x 1.32 229.00 3 x C\v 1.40 423.50 1 1.45 423.50 1Z\v 1.74 423.50 1Z\x 1.74 423.50 4 x C\v 2.75 501.00 1 2.86 657.00 1Z\v 3.03 657.00 1Z\x 3.16 657.00 Section 8 Copper Connection Grooved Piping System 140

Series 608 Copper Connection Butterfly Valve Copper Connection for Grooved Copper Tubing Copper Connection Butterfly Valves Series 608 EPDM (Grade E) Disc (Fig. V - _ -362 _ - ) Cast Bronze Body Refer to publication 22.05 Series 608 Bare Valve, Two Position Detent, Lever Operator, or Gear Operator Copper Bare Valve Two Position Detent Lever Operator Gear Operator Actual Code (3622-00) (362-15) (3622-11) (3622-20) 2Z\x 024 $762.00 $842.00 $938.00 $1536.00 3 030 852.50 999.00 1030.50 1627.00 4 040 1128.00 1303.00 1901.50 6 060 1595.00 1771.50 2368.50 See valve numbering chart for reference. Valve Options When ordered separately from the valve, these items are provided as a kit. Series 608 Valve Options Actual Copper Bracket Insulation [mm] Code (3 3 - ) 2Z\x 024 $98.00 3 030 98.00 4 040 101.00 6 060 123.50 See valve numbering chart for reference. Series 608 Gear Operator Section 8 Copper Connection Grooved Piping System 141

Series 608 Accessories Copper Connection for Grooved Copper Tubing Handwheels for Gear Operators Fits Vic-300 MasterSeal, Series 700, 726 and 608 Gear Operators Vic-300 MasterSeal and Series 608 Valve Handwheel Diameter 1Z\x - 4 4 $45.50 5 5 90.50 Operator Options When ordered separately from the valve, these items are provided as a kit. Series 608 Operator Options Actual Copper Chain Wheel Memory Stop Weight Each Code (3 _ - 22) (3 _ - 21) 2Z\x 024 $516.50 + 3.5 3 030 516.50 + 3.5 4 040 516.50 + 3.5 6 060 516.50 + 5.0 See valve numbering chart for reference. + Quoted on application. Contact Victaulic for pricing and availability. Galvanized chain @ $12.00 per foot. Gear Operators available with both memory stop and chain wheel - add both adders (1 _ - 24). V - 040-3 6 6 6-11 Type In./mm Code V 2½/63.5 024 3/76.1 030 4/101.6 040 6/152.4 060 Pressure Rating Body Disc/Trim Bracket Operator 3-300 psi 6 - Bronze (w/copper connection grooves) NOTES: (2) Used with 2 position detent handle only * Details required 9 - Special* 1 - Buna/Bronze- T 2 - EPDM/Bronze- E 9 - Special* 0 - No Bracket (2) 2 - Standard 3 - Standard with Insulation 9 - Special* 00 -Bare 11 - Lever handle with memory stop 15-2 position detent handle (sizes 2½ & 3"/63.5 & 76.1 mm only) 20 - Gear Operator 21 - Gear Operator with memory stop 22 - Gear Operator with chainwheel 23 - Gear Operator with AWWA square oper. nut 24 - Gear Operator with memory stop and chainwheel 29 - Non-std. gear operator* Section 8 Copper Connection Grooved Piping System 142

SECTION 11 - Aluminum Products Aluminum Products 143

Aluminum Couplings Aluminum Fittings Products for Grooved Aluminum Pipe Section 9 Products for Grooved Aluminum Pipe Aluminum Coupling Styles 77A and 78A Style 77A Aluminum couplings and fittings available. Refer to publication 21.01 for Style 77A Coupling, publication 21.02 for Style 78A Coupling, or publication 21.03 for Aluminum Fitting technical information. Contact Victaulic for product availability and pricing. Style 78A Aluminum Fittings No. 10A Elbow No. 20A Tee 144

SECTION 12 - Stainless Steel Products Stainless Steel Products 145

Ductile Iron Couplings for Stainless Steel Pipe Style 89 Rigid Coupling Style W89 AGS Rgid Coupling Products for Grooved Stainless Steel Pipe Ductile Iron Galvanized Coupling for Stainless Steel Applications Please see Gasket Selection Guide or publication 05.01 for available gasket compounds and service recommendations. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Rigid Coupling Style 89 Refer to publication 17.24 Rigid Coupling (For Stainless Steel Pipe) Style W89 Refer to publication 20.15 Style 89 Grade E or T Gasket Nominal PIPE Outside Dia. Wgt. Ea. PLATED BOLT & NUT COUPLING COMPLETE Galvanized With Grade E or T Gasket COUPLING COMPLETE Galvanized With Grade E or T FlushSeal Gasket No. 2 2.375 3.3 $63.50 $88.00 2 B\, x 2C\v 2Z\x 2.875 4.0 75.00 106.50 2 B\, x 3Z\x 3 3.500 4.6 84.00 112.00 2 B\, x 3Z\x 4 4.500 8.2 117.50 159.50 2 C\v x 4Z\v 5 6.625 16.0 201.50 295.00 2 M\, x 5Z\x 6 6.625 16.0 201.50 295.00 2 M\, x 5Z\x 8 8.625 26.3 323.50 401.00 2 1 x 5Z\x 10 10.750 32.8 568.00 668.00 2 1 x 6Z\x 12 12.750 42.1 659.50 783.50 2 1 x 6Z\x Note: Painted Style 89 couplings available upon request. Contact our Engineered Product Group for details. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. AGS Style W89 Grade E or T FlushSeal Gasket PIPE Wgt.Ea. PLATED BOLT & NUT Nominal Outside Dia. COUPLING COMPLETE Galvanized With Grade E or T FlushSeal Gasket COUPLING COMPLETE Galvanized With Grade L FlushSeal Gasket No. 14 14.000 69.0 $827.50 $1856.50 2 1Z\, x 5Z\x 16 16.000 83.0 1079.00 2122.50 2 1Z\, x 5Z\x 18 18.000 95.0 1248.50 2291.50 2 1Z\, x 5Z\x 20 20.000 110.0 1483.50 2481.00 2 1Z\, x 5Z\x 24 24.000 190.0 2190.50 3007.00 2 1Z\, x 5Z\x Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. RWX Rolls for AGS Lightwall Stainless Steel Pipe Tool Model VE416FS VE416FSD VE414MC Part Number Pipe Range Purchase List Price Each Set * RWX1416016 14-16 $3610.00 * Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. 146

Stainless Steel Couplings Style 489 Rigid Coupling Style 489DX Duplex Rigid Coupling Products for Grooved Stainless Steel Pipe Stainless Steel and Duplex Couplings NOTE: For 1/2 2 stainless steel pipe refer to Section 6 Vic-Press System for Schedule 10S Stainless Steel Pipe Rigid Coupling Style 489 CF8M Refer to publication 17.25 1Z\x 4 6 12 Duplex Rigid Coupling Style 489DX CE8MN Refer to publication 17.33 Style 489 Grade EW or T Gasket PIPE Weight Ea. Nominal Outside Dia. COUPLING COMPLETE With Grade EW or T Gasket COUPLING COMPLETE With Grade E or T FlushSeal Gasket No. STAINLESS STEEL BOLT & NUT 1Z\x 1.900 1.6 $209.50 $237.00 2 C\, x 2Z\x $74.50 2 2.375 1.6 234.50 273.00 2 C\, x 2Z\x 74.50 2Z\x 2.875 1.9 257.50 292.00 2 C\, x 2Z\x 74.50 3 3.500 2.8 287.50 320.50 2 Z\x x 2C\v 105.50 4 4.500 4.0 362.00 410.00 2 Z\x x 2C\v 105.50 6 6.625 14.5 837.00 909.00 2 M\, x 5Z\x 234.50 8 8.625 22.8 1744.50 1834.50 2 1 x 5Z\x 307.50 10 10.750 28.4 2055.50 2171.00 2 1 x 6Z\x 305.00 12 12.750 36.6 2893.50 3034.00 2 1 x 6Z\x 305.00 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. Style 489DX Grade EW or E Gasket or FlushSeal Gasket PIPE Weight Ea. COUPLING COMPLETE With Grade EW or T Gasket COUPLING COMPLETE With Grade E or T FlushSeal Gasket STAINLESS STEEL BOLTS, SILICON BRONZE NUTS, STAINLESS STEEL WASHERS Nominal Outside Dia. No. 2 2.375 3.0 $277.00 $331.00 2 C\, x 2Z\x $74.50 2Z\x 2.875 3.9 303.00 351.50 2 C\, x 2Z\x 74.50 3 3.500 4.6 339.50 383.50 2 Z\x x 2C\v 105.50 4 4.500 8.5 427.50 493.00 2 Z\x x 2C\v 105.50 6 6.625 15.5 1026.00 1127.50 2 M\, x 5Z\x 234.50 8 8.625 24.0 2061.00 2172.00 2 1 x 5Z\x 307.50 10 10.750 33.0 2427.50 2572.00 2 1 x 6Z\x 305.00 12 12.750 40.0 3417.00 3591.50 2 1 x 6Z\x 305.00 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 147

Style 475 Flexible Coupling Style 475DX Flexible Coupling Duplex Stainless Steel Coupling Style 77DX Duplex Flexible Coupling Products for Grooved Stainless Steel Pipe Flexible Coupling Style 475 CF8M (Formerly named Style 471) Refer to publication 17.14 Style 475 Grade EW or T Gasket or FlushSeal Gasket Nominal Weight Each COUPLING COMPLETE With Grade EW or T Gasket COUPLING COMPLETE With Grade E or T FlushSeal Gasket No. STAINLESS STEEL BOLT & NUT 1 1.6 $161.00 $191.50 2 C\, x 2 $74.50 1Z\v 2.4 188.00 214.00 2 C\, x 2 74.50 1Z\x 2.6 209.50 236.50 2 C\, x 2 74.50 2 1.7 234.50 273.00 2 C\, x 2 74.50 2Z\x 1.9 257.50 292.00 2 C\, x 2 74.50 3 2.8 287.50 320.50 2 Z\x x 2C\v 105.50 4 4.0 362.00 410.00 2 Z\x x 2C\v 105.50 Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Duplex Flexible Coupling Style 475DX CE8MN Refer to publication 17.34 Flexible Coupling Style 77DX CE8MN Refer to publication 17.20 Style 475DX Grade EW or E Gasket or FlushSeal Gasket Nominal Weight Each STAINLESS STEEL BOLT & NUT COUPLING COUPLING COMPLETE With Grade EW Gasket COMPLETE With Grade E FlushSeal Gasket No. 1 1.3 $190.00 $235.00 2 C\, x 2 $74.50 1Z\v 1.4 + 258.50 2 C\, x 2 74.50 1Z\x 1.5 247.50 284.50 2 C\, x 2 74.50 2 1.7 277.00 331.00 2 C\, x 2 74.50 2Z\x 1.9 304.00 351.50 2 C\, x 2 74.50 3 2.9 339.50 383.50 2 Z\x x 2C\v 105.50 4 4.2 427.50 493.00 2 Z\x x 2C\v 105.50 + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Style 77DX Grade EW, E or T Gasket or FlushSeal Gasket Pipe Wgt. Each Spare Parts COUPLING STAINLESS STEEL BOLTS, SILICON COUPLING COMPLETE With Grade COMPLETE With Grade EW or T BRONZE NUTS, STAINLESS STEEL WASHERS Nom. Outside Diameter EW or T Gasket FlushSeal Gasket No. C\v 1.050 1.2 $328.00 + 2 C\, x 2 $74.50 1 1.315 1.8 344.50 $371.00 2 C\, x 2 74.50 1Z\v 1.660 2.0 383.50 412.50 2 C\, x 2 74.50 1Z\x 1.900 2.3 366.00 359.00 2 C\, x 2 74.50 2 2.375 3.0 445.50 472.50 2 C\, x 2 74.50 2Z\x 2.875 3.1 455.00 491.00 2 C\, x 2 74.50 3 3.500 4.7 483.50 516.50 2 Z\x x 2C\v 105.50 4 4.500 6.8 718.50 765.00 2 B\, x 3Z\x 105.50 6 6.625 8.5 1196.00 1302.00 2 C\v x 4Z\v 149.50 Coupling less gasket is additional. Contact Victaulic for details. NOTE: This product is supplied standard in CE8MN Duplex Stainless Steel. Reference submittal 17.20 for details. All other sizes are supplied in Type 316 Stainless Steel, see chart below. + Quoted on application. Contact Victaulic for pricing and availability. 148

Style 77S Flexible Coupling Stainless Steel Flange Adapters Style 441 Vic-Flange Adapter No. 445F and No. 445R Stainless Steel Flange Adapter Nipples Products for Grooved Stainless Steel Pipe Flexible Coupling Style 77S Refer to publication 17.03 Style 77S Grade EW or T Gasket or FlushSeal Grade E, EW or T Gasket Nominal PIPE Outside Diameter Wgt. Each COUPLING COMPLETE With Grade EW or T Gasket COUPLING COMPLETE With Grade E or T FlushSeal Gasket No. STAINLESS STEEL BOLT & NUT 8 8.625 23.5 $2480.50 $2574.00 2 M\, x 5 $234.50 10 10.750 33.0 2909.50 3030.00 2 1 x 6 246.50 12 12.750 35.0 4001.50 4148.00 2 1 x 6Z\x 305.00 14 14.000 37.0 4392.00 4502.50 2 1 x 6Z\x 327.50 16 16.000 53.0 6625.50 6778.00 4 1 x 5Z\x + 18 18.000 62.0 6688.00 7052.50 4 1 x 5Z\x + + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Stainless Steel Vic-Flange Adapter Style 441 Refer to publication 17.27 Stainless Steel Flange Adapter Nipples No. 445F and No. 445R Refer to publication 17.27 No. 445F ANSI B16.5 Class 150 Flat Face No. 445R ANSI B16.5 Class 150 Raised Face Style 441 Stainless Steel Vic-Flange Adapters PIPE For spare parts see page 22. Weight Each 2 3.0 $232.00 2Z\x 4.3 279.50 3 4.8 307.50 4 6.9 403.50 6 9.5 508.00 No. 445F and No. 445R Stainless Steel Flange Adapter Nominal End to End Weight Each No 445F No. 445R Type 304L Type 316L Type 304L Type 316L 1Z\v 4.00 3.3 + + 1Z\x 4.00 3.9 + + 2 4.00 6.2 + + $624.00 $673.50 2Z\x 4.00 9.9 + + 931.00 1005.00 3 4.00 11.4 + + 961.50 1038.00 4 6.00 18.4 + + 1344.00 1451.00 5 6.00 21.3 + + + + 6 6.00 27.5 + + 1809.00 1935.00 8 6.00 41.3 + + 2470.50 2961.00 10 8.00 59.8 + + 3178.00 3695.00 12 8.00 88.2 + + 5581.00 7115.50 + Quoted on application. Contact Victaulic for pricing and availability. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 149

Schedule 10S Stainless Steel Fittings No. 410 SS 90 Elbow, No. 411 SS 45 Elbow No. 412 SS 22Z\x Elbow, No. 413 SS 11Z\v Elbow ANSI Sch. 10S Stainless Steel Fittings Standard Schedule 10S, Type 304L and Type 316L Stainless Steel Fittings Stainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Elbows Refer to publication 17.16 No. 410 SS No. 411 SS Elbows Refer to publication 17.16 No. 412 SS No. 413 SS Elbows 90 Elbow or 45 Elbow Nominal 90 Elbow No. 410 SS 45 Elbow No. 411 SS Weight Each Center to End Weight Each Center to End Type 304L Type 316L Type 304L Type 316L 1 0.7 2.88 $131.50 0.6 2.00 $119.00 1Z\v 1.0 3.13 133.50 0.8 2.00 120.00 1Z\x 1.4 3.50 134.00 1.0 2.13 122.50 2 2.2 4.50 150.50 1.6 2.75 134.00 2Z\x 3.3 5.00 204.00 2.2 2.88 177.00 3 2.6 4.50 $197.00 244.50 1.3 2.00 $181.50 225.00 4 4.7 6.00 281.00 350.00 2.3 2.50 259.50 322.50 6 11.0 9.00 740.50 924.00 5.5 3.75 489.00 610.50 8 21.2 12.00 1287.00 1606.50 11.0 5.00 836.00 1045.00 10 36.6 15.00 2540.00 3174.00 18.5 6.25 1955.50 2287.00 12 56.9 18.00 3981.00 4974.50 28.4 7.50 2698.50 3373.00 Note: 1 2Z\x available as Type 316 stainless only. Elbows 22Z\x Elbow or 11Z\v Elbow Nominal 22Z\x Elbow No. 412 SS 11Z\v Elbow No. 413 SS Weight Each Center to End Weight Each Center to End Type 304L Type 316L Type 304L Type 316L C\v 1.63 + + 1.38 + + 1 0.5 1.63 + + 0.2 1.38 + + 1Z\v 0.6 1.75 + + 0.4 1.38 + + 1Z\x 0.6 1.75 + + 0.4 1.38 + + 2 1.0 1.88 + + 0.7 1.38 + + 2Z\x 1.4 2.00 + + 0.7 1.50 + + 3 1.7 2.25 + + 1.2 1.50 + + 4 2.8 2.88 + + 1.8 1.75 + + 6 5.8 3.18 + + 3.4 2.00 + + 8 9.2 3.88 + + 4.6 2.00 + + 10 13.6 4.38 + + 5.3 2.13 + + 12 19.2 4.88 + + 14.1 2.25 + + + Quoted on application. Contact Victaulic for pricing and availability. Fittings are segmentally welded stainless steel. 150

Tees ANSI Sch. 10S Stainless Steel Fittings Tees Refer to publication 17.16 No. 420 SS & No. 20 SS Tees Nominal Style Weight Each Center to End Number Type 304L Type 316L 1 No. 20 SS 0.7 2.25 $392.50 $409.00 1Z\v No. 20 SS 1.5 3.13 461.00 + 1Z\x No. 420 SS 2.2 3.38 382.50 2 No. 420 SS 2.4 2.75 400.00 2Z\x No. 420 SS 3.7 3.13 487.00 3 No. 420 SS 3.1 3.75 505.50 631.00 4 No. 420 SS 4.9 4.50 540.50 676.00 6 No. 420 SS 11.7 5.88 1052.00 1475.50 8 No. 420 SS 20.4 7.75 1553.50 2743.00 10 No. 420 SS 34.4 8.88 3038.00 7006.50 12 No. 420 SS 52.4 10.38 4578.00 8932.00 + Quoted on application. Contact Victaulic for pricing and availability. No. 20 SS Tees are Schedule 10S, Type 304L or 316L stainless steel from A403CR/S9. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 151

Reducing Tee ANSI Sch. 10S Stainless Steel Fittings Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Reducing Tee Schedule 10S 304/316 Segmentally welded not a CR class fitting. Refer to publication 17.16 No. 25 SS SSW & No. 425 SS Reducing Tees Nominal Style Weight Each Center to End Run Center to End Branch Number Type 304L Type 316L 1Z\x x 1Z\x x C\v No. 25 SS-SW 1.3 2.75 2.75 $338.00 $492.50 1 No. 25 SS-SW 1.4 2.75 2.75 345.00 423.50 1Z\v No. 25 SS-SW 1.5 2.75 2.75 352.50 433.50 2 x 2 x C\v No. 25 SS-SW 2.0 3.25 3.25 363.00 446.50 1 No. 25 SS-SW 2.1 3.25 3.25 371.50 438.00 1Z\v No. 25 SS-SW 2.3 3.25 3.25 417.50 568.50 1Z\x No. 425 SS 2.4 2.75 2.75 472.00 568.50 2Z\x x 2Z\x x C\v No. 25 SS-SW 2.8 3.75 3.75 429.00 + 1 No. 25 SS-SW 3.0 3.75 3.75 473.00 581.00 1Z\x No. 25 SS-SW 3.5 3.75 3.75 534.00 583.50 2 No. 425 SS 3.5 3.07 3.07 574.50 3 x 3 x C\v No. 25 SS-SW 4.0 4.25 4.25 426.00 511.00 1 No. 25 SS-SW 4.1 4.25 4.25 473.50 543.00 1Z\v No. 25 SS-SW 4.2 4.25 4.25 561.00 668.50 1Z\x No. 25 SS-SW 4.3 4.25 4.25 583.50 701.50 2 No. 425 SS 3.1 3.75 3.23 625.00 + 2Z\x No. 425 SS 3.1 3.75 3.23 602.00 749.50 4 x 4 x 1 No. 25 SS-SW 5.0 5.00 5.00 + + 1Z\v No. 25 SS-SW 5.3 5.00 5.00 + + 1Z\x No. 25 SS-SW 5.6 5.00 5.00 + + 2 No. 25 SS-SW 4.4 4.47 3.82 708.00 847.00 2Z\x No. 425 SS 4.9 4.47 3.82 + 906.50 3 No. 425 SS 4.9 4.47 3.88 831.00 1037.00 6 x 6 x 2 No. 25 SS-SW 11.6 6.50 6.50 + 1768.50 2Z\x No. 425 SS 12.1 6.50 6.50 + + 3 No. 425 SS 8.8 5.91 4.88 1071.50 1337.50 4 No. 425 SS 9.5 5.91 5.12 1328.50 1585.50 8 x 8 x 2Z\x No. 25 SS-SW 17.5 7.75 7.75 + + 3 No. 25 SS-SW 18.0 7.75 7.75 + + 4 No. 425 SS 18.1 7.79 6.31 3129.50 3735.50 6 No. 425 SS 18.5 7.79 6.62 4102.00 5029.00 10 x 10 x 3 No. 25 SS-SW 29.0 9.00 9.00 + + 4 No. 25 SS-SW 30.0 9.00 9.00 + 3003.00 6 No. 425 SS 28.2 8.89 7.70 5005.00 6380.00 8 No. 425 SS 31.3 8.89 8.59 5049.00 6435.50 12 x 12 x 6 No. 25 SS-SW 43.0 10.00 10.00 + + 8 No. 425 SS 40.1 10.39 9.51 7214.00 9004.00 10 No. 425 SS 47.6 10.39 9.89 8623.00 10761.00 Other sizes available upon request. Contact Victaulic for details. + Quoted on application. Contact Victaulic for pricing and availability. 152

No. 430 SS 45 Lateral, No. 433 SS True Y, No. 435 SS Cross No(s). 442 SS and 443 SS Adapter Nipples ANSI Sch. 10S Stainless Steel Fittings 45 Lateral, True Wye and Cross Refer to publication 17.16 No. 430 SS No. 433 SS No. 430 SS 45 Lateral, No. 433 SS True Wye and No. 435 SS Cross Nominal 45 Lateral No. 430 SS True Wye No. 433 SS Cross No. 435 SS Weight Each Weight Each Weight Each Type 304L Type 316L Type 304L Type 316L Type 304L Type 316L C\v 0.8 + + 0.6 + + 0.7 + + 1 1.4 + + 0.9 + + 1.1 + + 1Z\v 1.9 + + 1.2 + + 1.6 + + 1Z\x 2.6 + + 1.4 + + 1.9 + + 2 3.3 + + 1.8 + + 2.7 + + 2Z\x 5.3 + + 2.5 + + 3.6 + + 3 6.5 + + 3.4 + + 5.8 + + 4 11.2 + + 5.1 + + 8.0 + + 6 20.9 + + 10.7 + + 13.4 + + 8 33.1 + + 16.6 + + 22.1 + + 10 47.5 + + 31.6 + + 54.9 + + 12 79.2 + + 38.4 + + 52.8 + + + Quoted on application. Contact Victaulic for pricing and availability. No. 435 SS Adapter Nipples Same prices apply for: No. 442 SS Grooved x Beveled No. 443 SS Grooved x Grooved Refer to publication 17.16 No. 442 SS Grv. x Bev. No. 443 SS Grv. x Grv. Adapter Nipples Grooved X Beveled or Grooved X Grooved Nom. Length Wgt. Ea. Type 304L Type 316L C\v 3.00 0.2 + + 1 3.00 0.3 + + 1Z\v 4.00 0.6 + + 1Z\x 4.00 0.7 + + 2 4.00 0.8 + + 2Z\x 4.00 1.1 + + 3 4.00 1.2 + + 4 6.00 2.8 + + 6 6.00 4.6 + + 8 6.00 6.5 + + 10 8.00 12.2 + + 12 8.00 15.8 + + + Quoted on application. Contact Victaulic for pricing and availability. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 153

Concentric Reducer ANSI Sch. 10S Stainless Steel Fittings Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Concentric Reducers Schedule 10S 304/316 Refer to publication 17.16 No. 50 SSLT & No. 450 SS Concentric Reducers Nominal Style Weight Each End to End Number Type 304L Type 316L 1Z\x x C\v No. 50 SSLT 1.3 3.75 $314.50 $674.00 1 No. 50 SSLT 1.4 3.75 244.00 284.00 1Z\v No. 50 SSLT 1.5 3.75 271.00 295.50 2 x C\v No. 50 SSLT 2.0 3.75 358.50 498.50 1 No. 50 SSLT 2.1 3.75 197.50 233.50 1Z\v No. 50 SSLT 2.3 3.75 548.50 693.50 1Z\x No. 450 SS 1.3 5.00 268.50 2Z\x x 1 No. 50 SSLT 3.0 5.00 716.00 830.00 1Z\v No. 50 SSLT 2.8 5.00 530.50 568.00 2 No. 450 SS 1.7 5.00 337.00 3 x 1 No. 50 SSLT 4.0 5.00 565.50 737.50 1Z\v No. 50 SSLT 4.1 5.00 813.00 + 1Z\x No. 50 SSLT 4.2 5.00 553.50 660.00 2 No. 450 SS 1.6 5.00 176.50 260.50 2Z\x No. 450 SS 1.5 5.00 144.50 179.50 4 x 2 No. 450 SS 3.9 5.00 235.00 411.00 2Z\x No. 50 SSLT 5.8 5.00 322.50 606.50 3 No. 450 SS 2.0 5.00 167.00 208.50 6 x 2Z\x No. 50 SSLT 6.8 15.00 2707.50 3422.00 3 No. 450 SS 4.0 5.50 540.50 674.50 4 No. 450 SS 4.2 5.50 411.00 512.00 8 x 4 No. 450 SS 5.3 6.00 1970.00 2462.00 6 No. 450 SS 7.0 6.00 1033.50 1290.00 10 x 6 No. 450 SS 8.8 7.00 2439.50 3049.50 8 No. 450 SS 11.5 7.00 2725.50 3406.50 12 x 8 No. 450 SS 13.2 8.00 3713.00 4640.00 10 No. 450 SS 17.0 8.00 3412.00 4263.50 (sw) Segmentally welded, not CR class fitting. Exception is 8 x 4 reducers which are CR class. + Quoted on application. Contact Victaulic for pricing and availability. 154

Eccentric Reducer No. 460 SS Cap ANSI Sch. 10S Stainless Steel Fittings Eccentric Reducers Schedule 10S 304/316 Refer to publication 17.04 No. 51 SSLT Cap Type 304/316 Refer to publication 17.16 No. 460 SS Eccentric Reducers Nominal Weight Each End to End Type 304L Type 316L 1Z\x x C\v 1.3 3.75 $1292.50 + 1 1.4 3.75 532.50 $612.50 1Z\x 1.5 3.75 + + 2 x C\v 2.0 3.75 + + 1 2.1 3.75 962.50 1067.00 1Z\v 2.3 3.75 1147.50 1224.50 1Z\x 2.5 3.75 605.00 693.50 2Z\x x 1 2.8 5.00 + 1Z\x 3.0 5.00 897.50 2 3.5 5.00 736.00 897.50 3 x 1 4.0 5.00 + + 1Z\v 4.1 5.00 + + 1Z\x 4.2 5.00 + + 2 4.3 5.00 744.50 810.50 2Z\x 4.5 5.00 757.00 869.00 4 x 2 4.8 5.00 1992.50 2889.00 2Z\x 5.8 5.00 928.50 1577.00 3 5.9 5.00 1547.00 1931.00 6 x 2Z\x 6.8 9.00 2707.50 + 3 6.9 9.00 4471.00 + 4 7.0 9.00 1632.00 2387.50 Other sizes available upon request. Contact Victaulic for details. + Quoted on application. Contact Victaulic for pricing and availability. Cap Nominal No. 460 SS Weight Each Thickness T Type 304L Type 316L C\v 0.1 0.75 + $125.50 1 0.2 0.75 + 125.50 1Z\v 0.3 0.75 + 132.50 1Z\x 0.4 0.75 + 138.00 2 0.6 1.13 + 190.00 2Z\x 0.9 1.13 + 197.50 3 1.1 1.00 + 356.00 4 * 1.8 1.13 + 454.00 6 * 4.0 1.75 + 542.50 8 * 7.0 2.25 + 1278.00 10 * 17.8 2.75 + 1673.50 12 * 26.7 3.25 + 1947.50 + Quoted on application. Contact Victaulic for pricing and availability. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 155

Schedule 10S Stainless Steel Fittings No. 410H SS 90 Elbow, No. 411H SS 45 Elbow No. 412 SS 22Z\x Elbow, No. 413 SS 11Z\v Elbow ANSI Sch. 40S Stainless Steel Fittings Standard Schedule 40S, Type 304L and Type 316L Stainless Steel Fittings Stainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery. Elbows Refer to publication 17.16 No. 410H SS No. 411H SS Elbows 90 Elbow or 45 Elbow Nominal 90 Elbow No. 410H-SS 45 Elbow No. 411H-SS Weight Each Center to End Weight Each Center to End Type 304L Type 316L Type 304L Type 316L 1 0.7 2.88 $421.00 $526.00 0.6 2.25 $399.50 $500.00 1Z\v 1.3 3.25 427.50 534.00 0.9 2.38 406.50 507.50 1Z\x 1.4 3.63 429.00 536.00 1.1 2.50 408.00 510.00 2 2.5 4.38 751.50 939.00 2.4 2.75 742.50 928.00 2Z\x 3.8 5.13 853.50 1067.00 2.8 3.13 835.50 1044.00 3 5.4 5.88 1013.00 1266.00 4.1 3.38 938.00 1173.00 4 12.0 7.50 1297.00 1622.00 4.8 4.00 1155.00 1443.50 6 29.3 10.75 2380.00 2975.00 17.0 5.50 1876.00 2345.00 8 59.0 14.25 3678.50 4598.00 34.0 7.25 2896.00 3620.50 10 99.0 17.25 6255.00 7818.50 58.3 8.50 4400.50 5406.00 12 142.0 20.50 8482.50 10602.50 85.0 10.00 4354.00 5443.00 Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Elbows Refer to publication 17.16 No. 412H SS No. 413H SS Elbows 22Z\x Elbow or 11Z\v Elbow Nominal 22Z\x Elbow No. 412H-SS 11Z\v Elbow No. 413H-SS Weight Each Center to End Weight Each Center to End Type 304L Type 316L Type 304L Type 316L C\v - 1.63 + + - 1.38 + + 1 0.6 1.63 + + 0.3 1.38 + + 1Z\v 0.8 1.75 + + 0.5 1.38 + + 1Z\x 0.8 1.75 + + 0.5 1.38 + + 2 1.4 1.88 + + 1.0 1.38 + + 2Z\x 2.3 2.00 + + 1.1 1.50 + + 3 3.1 2.25 + + 2.1 1.50 + + 4 5.6 2.88 + + 3.6 1.75 + + 6 12.2 3.18 + + 7.0 2.00 + + 8 20.0 3.88 + + 10.1 2.00 + + 10 30.0 4.38 + + 11.8 2.13 + + 12 40.0 4.88 + + 29.3 2.25 + + + Quoted on application. Contact Victaulic for pricing and availability. Fittings are segmentally welded stainless steel. 156

No. 420H SS Tee No. 425H SS Reducing Tee ANSI Sch. 40S Stainless Steel Fittings Tee Refer to publication 17.16 No. 420H SS No. 420H SS Tee Nominal Weight Each Center to End Type 304L Type 316L 1 0.9 2.25 $1051.50 $1314.50 1Z\v 1.5 2.75 1067.00 1334.00 1Z\x 1.7 2.75 1082.50 1353.50 2 2.5 3.25 1206.00 1508.00 2Z\x 4.7 3.75 1268.00 1585.00 3 7.0 4.25 1453.50 1817.00 4 13.0 5.00 2133.50 2667.00 6 26.4 6.50 3679.50 4599.00 8 46.1 7.75 4020.00 5024.00 10 71.5 9.00 9319.00 11648.50 12 100.0 10.00 11879.50 14849.50 Reducing Tee Refer to publication 17.16 No. 425H SS No. 425H SS Reducing Tee Nominal Weight Each Center to End Run Type 304L Type 316L 2 x 2 x 1 2.5 3.25 $1485.50 $1857.00 1Z\v 2.8 3.25 1669.50 2086.50 1Z\x 3.2 3.25 1886.50 2358.00 2Z\x x 2Z\x x 1Z\x 4.4 3.75 2135.50 2669.50 2 4.5 3.50 2380.50 2975.50 3 x 3 x 1Z\x 4.5 4.25 2334.00 2917.50 2 5.2 4.25 2498.50 2975.50 2Z\x 5.6 4.25 2697.00 3371.00 4 x 4 x 2 10.2 5.00 2832.00 3540.00 2Z\x 10.5 5.00 3030.00 3787.50 3 11.6 5.00 3323.50 4154.50 6 x 6 x 2 22.0 6.50 3 22.4 6.50 3863.00 4829.00 4 22.8 6.50 3985.00 4981.50 8 x 8 x 3 35.0 7.75 4 39.3 7.75 5603.50 7004.00 6 45.0 7.75 7543.50 9429.50 10 x 10 x 4 63.0 9.00 6 68.3 9.00 9569.50 11962.50 8 71.0 9.00 9653.50 12067.00 12 x 12 x 6 73.0 10.00 8 75.0 10.00 13506.50 16883.00 10 77.0 10.00 16142.00 20177.00 Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 157

No. 430H SS 45 Lateral, No. 433H SS True Y, No. 435H SS Cross No(s). 440H SS, 442H SS, and 443H SS Adapter Nipples ANSI Sch. 40S Stainless Steel Fittings 45 Lateral, True Wye and Cross Refer to publication 17.16 No. 430H SS No. 433H SS No. 430H SS 45 Lateral, No. 433H SS True Wye and No. 435H SS Cross Nominal 45 Lateral No. 430H SS True Wye No. 433H SS Cross No. 435H SS Weight Each Weight Each Weight Each Type 304L Type 316L Type 304L Type 316L Type 304L Type 316L C\v 1.0 + + 0.7 + + 0.9 + + 1 1.7 + + 1.1 + + 1.3 + + 1Z\v 2.5 + + 1.5 + + 2.1 + + 1Z\x 3.5 + + 1.8 + + 2.5 + + 2 4.6 + + 2.5 + + 3.8 + + 2Z\x 9.0 + + 4.3 + + 6.1 + + 3 11.7 + + 6.1 + + 10.5 + + 4 22.2 + + 10.0 + + 15.8 + + 6 43.6 + + 22.3 + + 28.0 + + 8 72.0 + + 36.0 + + 48.0 + + 10 105.0 + + 69.9 + + 121.5 + + 12 165.0 + + 80.0 + + 110.0 + + + Quoted on application. Contact Victaulic for pricing and availability. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE No. 435H SS Adapter Nipples Same prices apply for: No. 440H SS Grooved x Threaded No. 442H SS Grooved x Beveled No. 443H SS Grooved x Grooved Refer to publication 17.16 No. 440H SS No. 442H SS Adapter Nipples Grooved X Threaded, Grooved X Beveled, or Grooved X Grooved Nom. Length Wgt. Ea. Type 304L Type 316L C\v 3.00 0.3 + + 1 3.00 0.4 + + 1Z\v 4.00 0.8 + + 1Z\x 4.00 0.9 + + 2 4.00 1.2 + + 2Z\x 4.00 1.9 + + 3 4.00 2.5 + + 4 6.00 5.5 + + 6 6.00 9.5 + + 8 6.00 14.2 + + 10 8.00 27.0 + + 12 8.00 33.0 + + + Quoted on application. Contact Victaulic for pricing and availability. No. 443H SS 158

No. 450H SS Concentric Reducer No. 451H SS Eccentric Reducer ANSI Sch. 40S Stainless Steel Fittings Concentric Reducer Refer to publication 17.16 No. 450H SS Eccentric Reducer Refer to publication 17.16 No. 451H SS Concentric Reducer Nominal Weight Each End to End Type 304L Type 316L 2 x 1 2.1 9.00 + + 1Z\v 2.4 9.00 + + 1Z\x 2.5 9.00 $660.00 $825.00 2Z\x x 1 3.2 9.50 + + 1Z\x 3.4 9.50 + + 2 4.0 9.50 826.00 1032.50 3 x 1Z\x 3.6 9.50 + + 2 4.8 9.50 898.00 1122.50 2Z\x 5.5 9.50 898.00 1122.50 4 x 2 6.8 10.00 + + 2Z\x 7.5 10.00 1315.00 1644.00 3 8.6 10.00 909.00 1136.50 6 x 3 15.0 11.50 1315.00 1644.00 4 16.0 11.50 1690.00 2112.50 8 x 4 24.0 12.00 2124.00 2655.00 6 26.0 12.00 2521.00 3151.50 10 x 6 40.0 13.00 3697.00 4621.50 8 43.0 13.00 4244.00 5305.00 12 x 8 52.5 14.00 6147.00 7684.00 10 57.0 14.00 6508.00 8135.00 + Quoted on application. Contact Victaulic for pricing and availability. Eccentric Reducer Nominal Weight Each End to End Type 304L Type 316L 2 x 1 2.1 9.00 + + 1Z\v 2.4 9.00 + + 1Z\x 2.5 9.00 $1894.00 $2367.50 2Z\x x 1 3.2 9.50 + + 1Z\x 3.6 9.50 + + 2 4.0 9.50 3202.00 4002.50 3 x 1Z\x 3.6 9.50 + + 2 4.8 9.50 3124.00 3905.00 2Z\x 5.5 9.50 3233.00 4041.50 4 x 2 6.8 10.00 + + 2Z\x 7.5 10.00 4426.00 5532.50 3 8.6 10.00 5626.00 7032.50 6 x 3 15.0 11.50 6227.00 7784.00 4 16.0 11.50 6443.00 8054.00 8 x 4 24.0 12.00 8908.00 11135.00 6 26.0 12.00 10859.00 13574.00 10 x 6 40.0 13.00 10220.00 12775.00 8 43.0 13.00 10994.00 13742.50 12 x 8 52.5 14.00 11771.00 14714.00 10 57.0 14.00 12561.00 15701.50 + Quoted on application. Contact Victaulic for pricing and availability. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 159

No. 60 SS Cap ANSI Sch. 40S Stainless Steel Fittings Cap No. 60 SS Refer to publication 17.16 No. 60 SS Cap Nominal Weight Each Thickness T Type 304L Type 316L C\v 0.2 0.91 $161.50 $186.50 1 0.3 0.91 161.50 186.50 1Z\v 0.6 0.94 172.00 197.50 1Z\x 0.7 0.94 179.00 206.00 2 1.2 0.94 246.00 283.00 2Z\x 1.7 0.97 256.50 294.00 3 2.6 0.97 460.00 + 4 4.6 1.03 589.50 + 6 10.1 1.03 702.50 + 8 21.8 1.31 1658.00 + 10 34 1.31 2280.00 + 12 47.9 1.31 2875.00 + + Quoted on application. Contact Victaulic for pricing and availability. Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE 160

Stainless Steel Valves Series 763 Butterfly Valve Products for IPS Stainless Steel Pipe Stainless Steel Valves for Grooved IPS SS Pipe Series 763 Butterfly Valve Refer to publication 17.23 Ordering Information Product, pressure rating, body material and disc/stem are standard as listed below. Please specify size, seat, and operator when ordering. Seat option adders (Grade O and Grade D ) must be added to the total valve price. Actuator kits for field mount are available on request. Pressure Body Fig No. Product Code Rating Material Disc/Stem Seat Operator V - XXX - 3-3 - 3 - Y - ZZ V XXX 300 psi 316 SS 316 SS Y ZZ See valve numbering chart for reference. Series 763 with Gear Operator Series 763 with Lever Lock 10 Position Handle BARE VALVES 2 (020) 2Z\x (024) 3 (030) 4 (040) 6 (060) 8 (080) 10 (100) V - XXX - 3-3 - 3 - Y - ZZ $1813.50 $1856.50 $2129.00 $2431.00 $3758.00 $5466.50 $9058.00 SEAT OPTION ADDER (Y) 1 - EPDM (E) STD STD STD STD STD STD STD 2 - Nitrile (T) STD STD STD STD STD STD STD 3 - Fluoroelastomer (O) POA POA POA POA POA POA POA D - Lubricated Nitrile (D) POA POA POA POA POA POA POA VALVE WITH OPERATOR (ZZ) (E & T - For valve with Grade O and Grade D please add seat option pricing) DUCTILE LEVER OPERATOR 03 - Lever Lock - 10 Position $1763.50 $2019.50 $2293.00 $2593.50 $3936.50 $5645.00 N/A ALUMINUM GEAR OPERATOR 20 - Gear Operator $2038.50 $2295.50 $2569.00 $2955.00 $4459.50 $6194.00 $9834.50 21 - Gear Op. with Memory Stop POA POA POA $3110.00 POA $6421.00 POA STAINLESS STEEL LEVER OPERATOR 53 - SS Lever Lock - 10 Position POA POA POA POA POA POA POA 54 - SS Lever Lock - Tamper Resistant POA POA POA POA POA POA POA STAINLESS STEEL GEAR OPERATOR 60 SS Gear Op. $2299.50 $4418.00 $2830.00 $3444.00 $5037.00 $6745.50 POA N/A - Not available. POA - Priced on application. V - 040-3 3 3 1-03 Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Type mm Code V 2/50 020 2½/65 76.1 mm 3/80 4/100 165.1 mm 6/150 8/200 10/250 024 076 030 040 165 060 080 100 NOTES: * Details required with order For air and gas service only. Pressure Rating Body Material Disc/Stem Seat Operator 3-300 psi 3-316 stainless steel 9 - Special* 3-316 stainless steel/ 316 stainless steel 9 - Special* 1 - EPDM - "E" 2 - Nitrile - T 3 - Viton - O D - Lubricated Nitrile 9 - Special* 00 - Bare 03 - Lever lock handle 20 - Gear operator 21 - Gear operator with memory 53 - Stainless steel lever lock handle 54 - Tamper-resistant stainless steel handle 60 - Stainless steel gear operator 99 - Special 161

Series 726-S Ball Valve Series 712-S Check Valve Products for IPS Stainless Steel Pipe Grooved End Ball Valve Series 726-S Refer to publication 17.22 Lever Handle Series 726-S with Stainless Steel Body and Trim Nominal Weight Each Valve Complete With Tamper Resistant Lock/Seal Option Valve Complete With Gear Operator * 1226-16 1226-20 1Z\x 4.7 $745.00 $1416.50 2 7.5 876.50 1717.50 2Z\x 11.5 1520.00 2315.50 3 17.3 2043.00 2793.50 8226-15 8226-20 4 44.0 3248.00 4142.00 6 82.0 7800.50 8371.50 Series 726-S valves are available with electric, pneumatic, and hydraulic actuators or chainwheels. Contact Victaulic for details. * Valve with gear operator requires additonal lead time. Contact Victaulic for details. B - 020-1 2 2 6-16 Section 10 PRODUCTS FOR GROOVED STAINLESS STEEL PIPE Check Valve Series 712-S Refer to publication 17.08 Act. Type In./mm Code B 1½/40 014 2/50 2½/65 3/80 4/100 6/150 020 024 030 040 060 Pressure Rating Body Ball & Stem Seat Operator 1-1,000 psi 2 8-800 psi³ 2-316 Stainless Steel 9 - Special¹ NOTES: (1) Details required. (2) For sizes 1½ - 3" (3) For sizes 4-6" * For ductile iron Series 726, request publication 08.23. 2-316 Stainless Steel 9 - Special¹ 6 - Reinforced Teflon 9 - Special¹ 00 - Bare 16-2-Position Handle with Tamperproof Locking Device 20 - Gear Operator 21 - Gear Operator with Memory 22 - Gear Operator with Chain Wheel 23 - Gear Operator with AWWA Square Nut 29 - Non-standard Gear Operator¹ Series 712-S Swinger check valve is available with Grade E, T or Fluoroelastomer seat, bumper and bonnet closure gasket. Specify choice on order. Contact Victaulic for details. Swinger check valves are supplied with bonnet cap drilled and tapped with Z\, NPT pipe plug for chemical injection or other auxillary connections. Series 712-S With 316 Stainless Steel Body Weight Each Valve Complete Valve Complete with Grade E or T Seat & Bonnet Gasket with Grade O Fluoroelastomer Seat & Bonnet Gasket 2 12.0 $2850.50 $3835.50 162

SECTION 13 - Large Diameter AGS Vic-Ring Products Large Diameter AGS Vic-Ring Products For pricing on Victaulic Bolted Split-Sleeve Couplings, refer to PL2013-VBSP. 163

Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings Large Diameter AGS Vic-Ring Products Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings Send US, Asia, and Europe inquiries to: ep@victaulic.com or fax to: 610-923-3010 To speak with a Customer Service representative in the US, please call 1-800-PICK-VIC In Canada, please e-mail viccanada@victaulic.com or fax 905-884-7446 The joining of pipe with a suitable Victaulic Vic-Ring coupling presents individual considerations that require review by a Victaulic Piping System expert who is experienced in special pipe joining applications. For more information please contact Victaulic, or refer to Victaulic Company s Vic-Ring submittals available at. TO OBTAIN A QUOTE, PLEASE PROVIDE THE INFORMATION REQUESTED BELOW. CUSTOMER INFORMATION: DISTRIBUTOR: DISTRIBUTOR CONTACT NAME: DISTRIBUTOR PHONE/FAX: PHONE: CONTRACTOR: FAX: DISTRIBUTOR E-MAIL: CONTRACTOR CONTACT NAME: CONTRACTOR PHONE/FAX: PHONE: PROJECT NAME: FAX: CONTRACTOR E-MAIL: PROJECT LOCATION: PROJECT BID DATE: APPLICATION DATA: NOMINAL PIPE SIZE: ACTUAL PIPE OD: WALL THICKNESS: PIPE MATERIAL: Carbon Steel: Grade Schedule Class Stainless Steel - Type: Schedule Ductile Iron: Pressure Class System Working Pressure (psi): Test/Proof Pressure (psi): Temperature (Deg. F): Media/Service: CONFIGURATION INFORMATION: COUPLING: STYLE: RINGS: LINING OPTION: SIZE (= PIPE O.D.): QTY: (per Joint pipe to pipe connections require two rings) UNLINED ABRASION Section 11 Large Diameter AGS Vic-Ring Products FLUSH ABRASION AND CORROSION RUBBER LINED FLUSH OVERHUNG RUBBER LINED OVERHUNG RUBBER LINED FLUSH RUBBER LINED WITH PROTECTIVE BUMPER FLUSH CHROMIUM CARBIDE OVERLAY (CCO) RUBBER LINED OVERHUNG RUBBER LINED WITH PROTECTIVE BUMPER OVERHUNG 164

Style W07 AGS Rigid Coupling for AGS Vic-Ring System Large Diameter AGS Vic-Ring Products Vic-Ring Couplings and Adapter Rings Rigid Coupling For AGS Vic-Ring System AGS Style W07 Refer to publication 16.11 14 24 26 48 AGS Style W07 For AGS Vic-Ring System Nom. PIPE Wgt. Ea COUPLING COMPLETE With FlushSeal E or T Gasket COUPLING COMPLETE With FlushSeal Silicone Grade L Gasket AGS Vic-Ring Outside Dia.. Painted Galv. Painted Galv. No. SPARE PARTS Plated Bolt & Nut 14 14.000 48.9 $642.50 $824.00 $1611.00 $1792.50 + 2 1 x 5Z\x 16 16.000 60.8 836.50 1067.50 1772.50 2003.00 + 2 1 x 5Z\x 18 18.000 71.2 966.50 1252.00 1949.50 2234.50 + 2 1 x 5Z\x 20 20.000 81.7 1321.00 1655.00 2259.50 2593.50 + 2 1Z\, x 5Z\x 24 24.000 116.2 1693.00 2145.00 2461.50 2912.50 + 2 1Z\, x 5Z\x 26 26.00 205.0 + + + + + 4 1C\, x 6 28 28.000 220.0 + + + + + 4 1C\, x 6 30 30.000 227.0 + + + + + 4 1Z\v x 7 32 32.000 242.0 + + + + + 4 1Z\v x 7 34 34.000 255.0 + + + + + 4 1Z\v x 7 36 36.000 268.0 + + + + + 4 1Z\v x 7 40 40.000 340.0 + + + + + 4 1Z\x x 7 42 42.000 360.0 + + + + + 4 1Z\x x 7 44 44.000 390.0 + + + + + 4 1Z\x x 7 46 46.000 415.0 + + + + + 4 1Z\x x 7 48 48.000 425.0 + + + + + 4 1Z\x x 7 + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Section 11 Large Diameter AGS Vic-Ring Products 165

Style W77 AGS Flexible Coupling for AGS Vic-Ring System Large Diameter AGS Vic-Ring Products Flexible Coupling for AGS Vic-Ring System AGS Style W77 Refer to publication 16.12 14 24 26 60 AGS Style W77 For AGS Vic-Ring System Nom. PIPE Wgt. Ea. COUPLING COMPLETE With FlushSeal E or T Gasket COUPLING COMPLETE With FlushSeal Silicone Grade L Gasket AGS Vic-Ring Outside Dia. Painted Galv. Painted Galv. No. SPARE PARTS Plated Bolt & Nut 14 14.000 47.5 $661.50 $914.50 $1630.50 $1883.00 + 2 1 x 5Z\x 16 16.000 57.8 868.00 1178.00 1804.50 2113.00 + 2 1 x 5Z\x 18 18.000 65.0 1016.00 1408.50 1998.50 2323.00 + 2 1 x 5Z\x 20 20.000 82.3 1356.50 1819.50 2295.50 2759.00 + 2 1Z\, x 5Z\x 24 24.000 106.8 1750.50 2350.50 2566.00 3119.00 + 2 1Z\, x 5Z\x 26 26.000 205.0 + + + + + 4 1Z\, x 6 28 28.000 220.0 + + + + + 4 1Z\, x 6 30 30.000 227.0 + + + + + 4 1Z\v x 7 32 32.000 242.0 + + + + + 4 1Z\v x 7 34 34.000 255.0 + + + + + 4 1Z\v x 7 36 36.000 268.0 + + + + + 4 1Z\v x 7 40 40.000 340.0 + + + + + 4 1Z\x x 7 42 42.000 360.0 + + + + + 4 1Z\x x 7 44 44.000 390.0 + + + + + 4 1Z\x x 7 46 46.000 415.0 + + + + + 4 1Z\x x 7 48 48.000 425.0 + + + + + 4 1Z\x x 7 54 54.000 648.0 + + + + + 4 1Z\x x 7 56 56.000 676.0 + + + + + 4 1Z\x x 7 60 60.000 720.0 + + + + + 4 1Z\x x 7 + Quoted on application. Contact Victaulic for pricing and availability. Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. NOTE: 14 60 standard for this size range is the W77 AGS flexible coupling. For 14 24" cut groove systems requiring the original groove coupling see Style 77 coupling. Section 11 Large Diameter AGS Vic-Ring Products 166

SECTION 14 Vic-Easy Roll Grooving Tools Pipe Preparation Tools LEASE PURCHASE AGREEMENT Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details. 167

Vic-Easy Roll Grooving Tools Field Portable VE12 VE26 S/C/SS/P VE26/VE46 Power Drive Kit Pipe Preparation Tools Vic-Easy Roll Grooving Tools Field Portable Section 11 Pipe Preparation Tools VE12 VE12 is designed for manual grooving of C\v 2 steel, stainless steel, aluminum and PVC pipe. Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price VE12 R000012VE0 17/20 $741.00 $1594.50 VE12SS R700026VE0 17/20 $741.00 1594.50 VE12 Ratings Maximum Capacity Pipe Material Pipe /Schedule VE12 ³ 4 1 1¹ 4 1¹ 2 2 VE12 Steel 5 10 5 40 VE12 Stainless 40S only VE12 Aluminum * 5 10 5 40 VE12 PVC Plastic 40 VE12SS Light Wall Stainless 5 10 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. * 6061-T4 or 6063-T4 Alloy must be used. VE26 S/C/SS/P VE26 is designed for manual grooving of 2 6 steel, stainless steel, aluminum, PVC, and copper tube. Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price VE26S Steel, Stainless Steel R100026VE0 22/25 $705.00 $1511.50 VE26C Copper Tube R200026VE0 22/25 705.00 1511.50 VE26SS Lightwall Stainless Steel R700026VE0 22/25 705.00 1511.50 VE26P Aluminum and PVC Pipe R750026VE0 22/25 705.00 1511.50 VE26 Ratings Maximum Capacity Pipe Material Pipe /Schedule VE26 2 2¹ 2 3 3¹ 2 4 5 6 VE26S Steel 5 40 5 10 VE26S Stainless 40S Only VE26C Copper K, L, M and DWV VE26P Aluminum * 5 40 5 10 VE26P PVC Plastic 40 VE26SS Lt. Wall SS 5S 10S Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. * 6061-T4 or 6063-T4 Alloy must be used. VE26/VE46 Power Drive Kit Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and improved VE26/VE46 to alternately groove pipe using stationary power drive used with VPD752 or Ridgid 300 power drives only.. Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price VE26/VE46 Power Drive Kit R075-026-KIT 7/9 N/A $279.50 Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 168

VE46/P VE226 B/S/M/C/BSS/MSS/P Pipe Preparation Tools VE46/P VE46 is designed for manual grooving of 3Z\x 6 steel, stainless steel, aluminum and PVC. Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price VE46 Steel R000046VE0 28/31 $775.50 $1827.50 VE46P Aluminum and PVC Plastic R200046VE0 28/31 775.50 1827.50 VE46 Ratings Maximum Capacity Pipe Material Pipe /Schedule VE46 3¹ 2 4 4¹ 2 5 6 VE46 Steel 5 40 VE46 Stainless 40S Only VE46P Aluminum * 5 40 VE46P PVC Plastic 40 40 80 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. * 6061-T4 or 6063-T4 Alloy must be used. Section 11 Pipe Preparation Tools VE226 B/S/M/C/BSS/ MSS/P VE226 is designed for use with a standard C\, square drive for roll feed with operator supplied ratchet wrench to roll groove C\v 6 steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300 power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822). Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price ^ VE226B C\v 1Z\x /26 48 mm R2022260FS 27/42 $768.50 $1692.00 VE226S 1Z\v 6 /42 168 mm R2002260FS 27/42 768.50 1692.00 VE226M 2 6 /60 168 mm R3002260FS 27/42 768.50 1692.00 VE226C 2 6 /60 168 mm R1002260FS 27/42 768.50 1692.00 VE226BSS C\v 1Z\x /26 48 mm R00X2260FS 27/42 768.50 1692.00 VE226MSS 2 6 /60 168 mm RXM02260FS 27/42 768.50 1692.00 VE226P 2 6 /60 168 mm Aluminum and PVC Plastic R6002260FS 27/42 768.50 1692.00 NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used. ^ For proper operation, a power drive and pipe stand are required. See Accessories for details. VE226 Ratings Maximum Capacity Pipe Material Pipe /Schedule VE226 ³ 4 1 1¹ 4 1¹ 2 2 2¹ 2 3 3¹ 2 4 4¹ 2 5 6 VE226S Steel 5 40 5 10 VE226S Stainless 40S Only VE226B Steel 5 40 VE226B Stainless 40S Only VE226B Aluminum * 5 40 VE226B PVC Plastic 40 40 80 VE226M Steel 5 40 5 10 VE226M Stainless 40S Only VE226C Copper K, L, M and DWV VE226BSS Lt. Wall SS 5S 10S VE226MSS Lt. Wall SS 5S 10S VE226P Aluminum * 5 40 5 10 VE226P PVC Plastic 40 80 40 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. * 6061-T4 or 6063-T4 Alloy must be used. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 169

VE226 Power Drive Kit Pipe Preparation Tools VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive. Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price VE226 Power Drive Kit R700-226-KIT 75/115 N/A $2752.50 Section 11 Pipe Preparation Tools Drive unit not included. * Ridgid is a registered trademark of the Ridge Tool Company. Ridgid 700 not included in kit. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 170

Vic-Easy Roll Grooving Tools Field Fabrication VE106 Groove-N-Go Pipe Preparation Tools Vic-Easy Roll Grooving Tools Field Fabrication VE106 Groove-N-Go VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v 6 /32 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v" - 6" (4-6" rolls are installed). Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price VE106 Groove-N-Go 110V R000106110 140/200 N/A $5332.50 VE106 Groove-N-Go 220V R000106220 140/200 N/A 5332.50 VE106 Ratings Maximum Capacity Pipe Material Pipe /Schedule VE106 1¹ 4 1¹ 2 2 2¹ 2 3 3¹ 2 4 5 6 Steel 5 40 Std. Rolls Stainless 40S Std. Rolls Lt. Wall SS 5S 10S RX Rolls* Copper K, L, M and DWV Copper Rolls Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. * RX Rolls RX is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving lightwall stainless steel pipe. VE106 Grooving Rolls * Purchase Pipe Material Part Number Pipe Range List Price Each Set R912106UA6 1Z\v 6 Upper $169.00 Standard R912106L03 1Z\v 3 Lower 475.00 R904106L06 4 6 Lower 475.00 Copper RR02106006 2 6 665.00 Stainless RX RX12106L06 1Z\v 6 Lower 525.00 EndSeal RZ02106003 1Z\v 3 Set 695.50 RZ04106006 4 6 Set 695.50 Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. Section 11 Pipe Preparation Tools Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 171

VE272SFS Pipe Preparation Tools Section 11 Pipe Preparation Tools VE272SFS The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300 Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 12 roll sets; 8 12 rolls are installed. NOTE: Optional C\v and 1 1Z\x grooving rolls available. Requires a VPD752 or Ridgid 300 power drive. Tool Model Part Number Tool Weight/ Shipping Weight. Rental Per Month Tool List Price VE272SFS R000272SFS 184/250 $1210.50 $6436.50^ Optional Stabilizer (8 12 / 219.1 323.9 mm only) R4002720FS 124.00 1747.50 NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used. ^ For proper operation, a power drive and pipe stand are required. See Accessories for details. VE272SFS Ratings Maximum Capacity Pipe Material Pipe /Schedule VE272SFS ³ 4 1 1¹ 4 1¹ 2 2 2¹ 2 3 3¹ 2 4 5 6 8 10 12 Steel 5 40 Std. Rolls 5 20 Std. Rolls Stainless 40S Std. Rolls Lt. Wall SS 5S 10S RX Rolls Aluminum * 5 40 RP Rolls 5 20 RP Rolls PVC Plastic 40 40 80 RP Rolls 40 Copper K, L, M and DWV Copper Rolls Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. A special lower roll exclusively for grooving 2 Sch. 80 PVC is available. Part. No. RP02272L02 VE272SFS Grooving Rolls * Standard Copper Stainless RX Endseal Pipe Material PVC/Aluminum Part Number Pipe Range Purchase List Price Each Set R900268001 C\v $2472.50 R900268002 1 1Z\x 2130.50 R902272003 2 3Z\x 1196.50 R904272006 4 6 1278.50 R908272012 8 12 1425.50 RR02272006 2 6 1483.00 RR08272008 8 2083.00 RX75268001 C\v + RX01268002 1 1Z\x + RX02272003 2 3Z\x 1668.00 RX04272006 4 6 1789.50 RX08272012 8 12 1792.50 RZ02272003 2 3Z\x 1947.00 RZ04272006 4 6 1991.00 RZ08272012 8 12 2071.50 RP02272003 2 3Z\x 1286.50 4 6 + RP08272012 8 1555.00 NOTE: Items listed in shaded areas are non-cancellable and non-returnable Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. + Quoted on application. Contact Victaulic for pricing and availability. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 172

VE270FSD Pipe Preparation Tools VE270FSD Completely self-contained unit with integral gear motor, safety guards, safety foot switch and power cord/plug. The VE270FSD uses a 110 power source, with a 220V model optional upon request. The tool is supplied complete with 2 12 roll sets; 8 12 rolls are installed. NOTE: Optional C\v and 1 1Z\x grooving rolls available. Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VE270FSD R000270FSD 340/410 $2453.00 $12210.00^ Optional stabilizer (8 12 / 219.1 323.9 mm only) R400276FSD 124.00 1920.00 ^ For proper operation, a pipe stand is required. See Accessories for details. VE270FSD Ratings Maximum Capacity Pipe Material Pipe /Schedule VE270FSD ³ 4 1 1¹ 4 1¹ 2 2 2¹ 2 3 3¹ 2 4 5 6 8 10 12 Steel 5 40 Std. Rolls 5 20 Std. Rolls Stainless 40S Std. Rolls Lt. Wall SS 5S 10S RX Rolls Aluminum * 5 40 RP Rolls 5 20 RP Rolls PVC Plastic 40 40 80 RP Rolls 40 Copper K, L, M and DWV Copper Rolls Section 11 Pipe Preparation Tools Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. A special lower roll exclusively for grooving 2 Sch. 80 PVC is available. Part. No. RP02272L02 VE270FSD Grooving Rolls * Standard Copper Stainless RX Endseal Pipe Material PVC/Aluminum Part Number Pipe Range Purchase List Price Each Set R900268001 C\v $2472.50 R900268002 1 1Z\x 2130.50 R902272003 2 3Z\x 1196.50 R904272006 4 6 1278.50 R908272012 8 12 1425.50 RR02272006 2 6 1483.00 RR08272008 8 2083.00 RX75268001 C\v + RX01268002 1 1Z\x + RX02272003 2 3Z\x 1668.00 RX04272006 4 6 1789.50 RX08272012 8 12 1792.50 RZ02272003 2 3Z\x 1947.00 RZ04272006 4 6 1991.00 RZ08272012 8 12 2071.50 RP02272003 2 3Z\x 1286.50 Contact Victaulic 4 6 + RP08272012 8 1555.00 NOTE: Items listed in shaded areas are non-cancellable and non-returnable Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. + Quoted on application. Contact Victaulic for pricing and availability. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 173

VE416FSD Pipe Preparation Tools Section 11 Pipe Preparation Tools VE416FSD VE416FSD tools are completely self-contained units with integral gear motor, safety foot switch and power cord/plug. VE416FSD uses 110V power and is supplied complete with 2 16 roll sets * (8 12 rolls are installed). It is equipped with a pipe stabilizer for 6 16 nominal pipe sizes to prevent pipe sway. 2 12 Original Groove Rolls 14 16 AGS Groove Rolls * For additional standard rolls and special rolls, see next page. Tool Model Part Number Tool Weigth/ Shipping Weight Rental Per Month Tool List Price VE416FSD R000417FSD 340/450 $4451.00 $28136.00^ ^ For proper operation, a pipe stand is required. See Accessories for details. Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 16 /350 400 mm std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability. For 14 16 stainless steel product applications requiring the original groove roll sets, please contact Victaulic for ordering information. VE416FSD Ratings Maximum Capacity Pipe Material VE416FSD/VE417FSD Steel 2 50 2¹ 2 65 3 80 4 100 Pipe /Schedule inches/mm 5 125 5 40 Std. Rolls 6 150 8 200 10 250 12 300 10 Std. 14 350 16 400 Std. Wall AGS Std. Wall Stainless 40 Std. Rolls Std. Wall RW AGS Lt. Wall SS 5S 10S RX Rolls AGS Lt. Wall SS 10S RWX Rolls # Aluminum * 5 40 RP Rolls 5 Std. Wall * PVC Plastic * 40 80 RP Rolls 40 * Copper K, L, M, and DWV Copper Rolls Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. VE416FS/FSD is designed for occasional field grooving of AGS pipe. These tools should not be used for field production grooving. For field production grooving capabilities, use a VE450FSD tool. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 174

Pipe Preparation Tools VE416FSD Grooving Rolls * Standard Pipe Material Part Number Pipe Range Purchase List Price Each Set R902416003 2 3Z\x $1837.50 R904416006 4 6 994.00 R908416012 8 12 1076.50 AGS Standard RW RW01416016 14 16 2716.50 Copper Endseal Stainless RX RR02416006 2 6 2401.50 RR08416008 8 1644.50 RZ02416003 2 3Z\x 2133.50 RZ04416006 4 6 1452.00 RZ08416012 8 12 1787.50 RX02416003 2 3Z\x 2179.00 RX04416006 4 6 1431.00 RX08416012 8 12 1511.00 AGS Stainless RWX RWX1416016 14 16 3610.00 PVC/Aluminum RP02416003 2 3Z\x 3089.50 RP04416006 4 6 2405.50 RP08416012 8 1658.50 Section 11 Pipe Preparation Tools NOTE: Items listed in shaded areas are non-cancellable and non-returnable Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. + Quoted on application. Contact Victaulic for pricing and availability. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 175

VE416FS Pipe Preparation Tools Section 11 Pipe Preparation Tools VE416FS VE416FS is provided with a mounting stand for field or shop assembly and set up. The stand and tool must be mounted to a VPD752 or Ridgid 300 38 rpm power drive before grooving. VE416FS is supplied complete with 2 16 roll sets* (8 12 rolls are installed). It is equipped with a pipe stabilizer for 6 16 nominal pipe sizes to prevent pipe sway. 2 12 Original Groove Rolls 14 16 AGS Groove Rolls Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VE416FS R0004160FS 240/400 $3308.50 $20907.00^ ^ For proper operation, a pipe stand is required. See Accessories for details. Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 16 /350 400 mm std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability. For 14 16 stainless steel product applications requiring the original groove roll sets, please contact Victaulic for ordering information. VE416FS Ratings Maximum Capacity Steel Pipe Material VE416FS 2 50 2¹ 2 65 3 80 4 100 Pipe /Schedule inches/mm 5 125 5 40 Std. Rolls 6 150 8 200 10 250 12 300 10 Std. 14 350 16 400 Std. Wall AGS Std. Wall Stainless 40 Std. Rolls Std. Wall RW AGS Lt. Wall SS 5S 10S RX Rolls AGS Lt. Wall SS 10S RWX Rolls # Aluminum * 5 40 RP Rolls 5 Std. Wall * PVC Plastic * 40 80 RP Rolls 40 * Copper K, L, M, and DWV Copper Rolls Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. # Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available. VE416FS/FSD is designed for occasional field grooving of AGS pipe. These tools should not be used for field production grooving. For field production grooving capabilities, use a VE450FSD tool. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 176

Pipe Preparation Tools VE416FS Grooving Rolls * Standard Pipe Material Part Number Pipe Range Purchase List Price Each Set R902416003 2 3Z\x $1837.50 R904416006 4 6 994.00 R908416012 8 12 1076.50 AGS Standard RW RW01416016 14 16 2716.50 Copper Endseal Stainless RX RR02416006 2 6 2401.50 RR08416008 8 1644.50 RZ02416003 2 3Z\x 2133.50 RZ04416006 4 6 1452.00 RZ08416012 8 12 1787.50 RX02416003 2 3Z\x 2179.00 RX04416006 4 6 1431.00 RX08416012 8 12 1511.00 AGS Stainless RWX RWX1416016 14 16 3610.00 PVC/Aluminum RP02416003 2 3Z\x 3089.50 RP04416006 4 6 2405.50 RP08416012 8 1658.50 Section 11 Pipe Preparation Tools NOTE: Items listed in shaded areas are non-cancellable and non-returnable Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. + Quoted on application. Contact Victaulic for pricing and availability. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 177

VE450FSD Pipe Preparation Tools VE450FSD VE450FSD is a self-contained unit with two 220 volt, single phase 50/60 hz, 20 amp integral gear motors to handle heavier loads, safety foot switch and power cord/plug. VE450FSD is supplied complete with 4 12 /100 300 mm original groove roll sets and 14 24 /350 600 mm AGS groove roll sets. 8 12" rolls are installed. Section 11 Pipe Preparation Tools Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VE450FSD R000450FSD 825 $4609.50 $36163.50 Optional Rolls: Optional rolls are available for 4 18 /100 450 mm lightwall stainless steel original groove; 14 24 /350 600 mm lightwall stainless steel AGS groove; and 4 12 /100 300 mm EndSeal (ES) groove. RP roll sets are also available for roll grooving aluminum and plastic. Note: VE450FSD is designed for field use only and should not be used for shop production. VE450FSD Ratings Maximum Capacity Pipe Material Pipe /Schedule VE450FSD 4 5 6 8 10 12 14 16 18 20 22 24 5S Steel 5 40 Std. Wall Sch. 5 Std. Wall RW AGS Stainless 40S Std. Rolls Std. Wall, Std. Rolls OGS Std. Wall, RW AGS Lt. Wall SS 5S 10S RX Rolls@ 5S/10S/10 RX Rolls OGS AGS Lt. Wall SS 10S RWX Rolls # Aluminum * 5 40 RP Rolls PVC Plastic * 40 80 40 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. EndSeal (ES) rolls are available. Contact Victaulic for details. # Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available. @ These rolls are not interchangeable with roll sets from other tool models. Contact Victaulic for ordering information. VE450FSD Grooving Rolls * Pipe Material Part Number Pipe Range Purchase List Price Each Set Standard R9Q1448006 4 6 $3564.50 R9Q1448012 8 12 4621.50 AGS Standard RW RWQ2448024 14 24 4643.50 RXQ1448006 4 6 8366.00 RXQ1448012 8 12 6774.00 Stainless RX RXQ1448016 14 16 6750.50 RXQ1448020 18 20 6856.50 RXQ1448024 22 24 7183.50 Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 178

Vic-Easy Roll Grooving Tools Shop Fabrication VE268 Pipe Preparation Tools Vic-Easy Roll Grooving Tools Shop Fabrication NOTE: All shop models shipped set for 220 power, unless specified otherwise. VE268 Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 12 nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 12 pipe) * (8 12 rolls are installed). NOTE: Optional C\v and 1 1Z\x grooving rolls available. Request RP-268 for power requirements or visit the Victaulic web site. These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a Boost and Buck Transformer may be required.) Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VE268 R000268VE0 735/766 $2896.00 $26142.00^ ^ For proper operation, a pipe stand is required. See Accessories for details. Section 11 Pipe Preparation Tools VE268 Ratings Maximum Capacity Pipe Material Pipe /Schedule VE268 ³ 4 1 1¹ 4 1¹ 2 2 2¹ 2 3 3¹ 2 4 5 6 8 10 12 Steel 5 40 Std. Rolls 5 20 Std. Rolls Stainless 40S Std. Rolls Lt. Wall SS 5S 10S RX Rolls Aluminum * 5 40 RP Rolls 5 20 RP Rolls PVC Plastic 40 40 80 RP Rolls 40 Copper K, L, M and DWV Copper Rolls Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. A special lower roll exclusively for grooving 2 Sch. 80 PVC is available. Part. No. RP02272L02 Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 179

VE414MC Pipe Preparation Tools Section 11 Pipe Preparation Tools VE268 Grooving Rolls * Standard Copper Endseal Stainless RX Pipe Material PVC/Aluminum Part Number Pipe Range Purchase List Price Each Set R900268001 C\v $2472.50 R900268002 1 1Z\x 2130.50 R902272003 2 3Z\x 1196.50 R904272006 4 6 1278.50 R908272012 8 12 1425.50 RR02272006 2 6 1483.00 RR08272008 8 2083.00 RZ02272003 2 3Z\x 1947.00 RZ04272006 4 6 1991.00 RZ08272012 8 12 2071.50 RX75268001 C\v + RX01268002 1 1Z\x + RX02272003 2 3Z\x 1668.00 RX04272006 4 6 1789.50 RX08272012 8 12 1792.50 RP02272003 2 3Z\x 1286.50 Contact Victaulic 4 6 + 8 + NOTE: Items listed in shaded areas are non-cancellable and non-returnable Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. + Quoted on application. Contact Victaulic for pricing and availability. VE414MC Fully-motorized, semi-automatic, hydraulic tool is shipped fully assembled with rolls for standard grooving (2 16 pipe *). Requires 220/440V, 3 phase, 60 Hz power supply. Safety guard, safety foot switch and instructions are included. Pipe stabilizer for pipe 8 and larger is included, to prevent pipe sway. 8 12" rolls are installed. 2 12 Original Groove Rolls 14 16 AGS Groove Rolls NOTE: New tools supplied with AGS rolls when 14 16 roll sets are specified. Request RP-414MC for power requirements or visit the Victaulic web site. These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a Boost & Buck Transformer may be required.) * For additional standard rolls and special rolls, see next page. Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VE414MC 220V R000414MC1 735/830 $4430.50 $37624.00^ VE414MC 440V R000268VE4 735/830 $4430.50 37624.00^ ^ For proper operation, a pipe stand is required. See Accessories for details. Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 16 /350 400 mm std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability. For product applications requiring the original groove roll sets, please contact Victaulic for ordering information. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 180

Pipe Preparation Tools VE414MC Ratings Maximum Capacity Steel Std. Wall Stainless Pipe Material VE414MC 2 50 2¹ 2 65 3 80 4 100 Pipe /Schedule 5 125 5 40 Std. Rolls 40 Std. Rolls 6 150 8 200 10 250 12 300 10 Std. 14 350 16 350 Std. Wall AGS Std. Wall RW AGS Lt. Wall SS 5S 10S RX Rolls 10S RWX AGS AGS Lt. Wall SS Aluminum * 5 40 RP Rolls PVC Plastic 40 80 RP Rolls 40 Copper K, L, M and DWV Copper Rolls 5 Std. Wall * 10S RWX Rolls # Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. # Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available. Section 11 Pipe Preparation Tools VE414MC Grooving Rolls * Pipe Material Part Number Pipe Range Purchase List Price Each Set R902416003 2 3Z\x $1837.50 Standard R904416006 4 6 994.00 R908416012 8 12 1076.50 AGS Standard RW RW01416016 14 16 2716.50 Copper RR02416006 2 6 2401.50 RR08416008 8 1644.50 RZ02416003 2 3Z\x 2133.50 Endseal RZ04416006 4 6 1452.00 RZ08416012 8 12 1787.50 RX02416003 2 3Z\x 2179.00 Stainless RX RX04416006 4 6 1431.00 RX08416012 8 12 1511.00 AGS Stainless RWX RWX1416016 14 16 3610.00 RP02416003 2 3Z\x 3089.50 PVC/Aluminum 4 6 + RP08272012 8 1555.00 NOTE: Items listed in shaded areas are non-cancellable and non-returnable Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. + Quoted on application. Contact Victaulic for pricing and availability. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 181

VE460 LIFTING POINT FRONT LIFTING POINT POINT LIFTING POINT LIFTING POINT FRONT FRONT LIFTING POINT POINT LIFTING POINT LIFTING POINT LIFTING POINT FRONT FRONT FRONT LIFTING POINT LIFTING POINT Pipe Preparation Tools Section 11 Pipe Preparation Tools VE460 Base Tool Fully-motorized, semi-automatic, hydraulic shop tool is shipped fully assembled with rolls for standard grooving (4 24 ).500 wall maximum. 8 12" rolls are installed. 4 12 Original Groove System Groove Rolls 14 24 AGS Groove Rolls Requires 220/440/3/60 power supply. All tools are shipped 220 as a standard. Operating instructions included. Request RP-460 for power requirements or visit the Victaulic web site. These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a Boost and Buck Transformer may be required.) See kits below for components required to groove above 24. TOOL ONLY VE460 Tool Model Part Number Roll Sets Included R000460VE0 Railing and Platfrom Kit Quantity/ Support Base (Quantity/Part Number) Tool Weight/ Shipping Weight. Rental Per Month List Price 4 6 /100 150 mm (R9Q1460006), 8 12 /200 300 mm (R9Q1460012), 14 24 /350 600 mm (R9Q1460024) AGS N/A N/A 1500/1750 $12162.50 $68819.00 Optional Kits for Grooving Above 24 Recommended Pipe Stand ^ VAPS224 (R000224PS0) OR VAPS1672 (R0001672PS) KIT 1 26 36 / 650 900 mm R260460KIT 26 36 /650 900 mm (RWQ3460038) AGS 1 (R550460KIT) 1 (R551460PNT) N/A $2157.50 $9857.50 VAPS236 (R000236PS0) OR VAPS1672 (R0001672PS) KIT 2 40 48 / 1000 1200 mm LIFTING R400460KIT 40 48 /1000 1200 mm (RWQ3460048) AGS 1 * (R550460KIT) 2 ** (R551460PNT) N/A 2445.50 10097.50 VAPS1672 (R0001672PS) KIT 3 50 60 / 1250 1500 mm LIFTING R500460KIT 50 60 /1250 1500 mm (RWQ3460060) AGS 1 * (R550460KIT) 3 ** (R551460PNT) N/A 2735.00 10338.00 VAPS1672 (R0001672PS) Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC, and aluminum pipe. ^ For proper operation, a pipe stand is required. See Accessories for details. Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be ordered individually or as a kit. * Railing and Platform Kit is required only if preceding kit has not been ordered. ** Only one (1) Support Base is required if preceding kit has been ordered. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 182

Pipe Preparation Tools VE460 Ratings Maximum Capacity Pipe Material VE460 4 100 5 125 Carbon Steel 5 80 6 150 8 200 10 250 12 300 5 Extra Strong 14 350 16 400 18 450 Stainless Steel Sch. 40 Only.375 RW AGS 20 500 Lt. Wall SS 5S 10S RX Rolls 5S/10S/10 RWX Rolls Aluminum # 5 40 PVC Plastic 40 80 40 22 550 Pipe /Schedule 24 600 26 650 28 700 30 750 32 800 34 850 36 900 38 950 40 1000 10 Extra Strong (.500) ^ AGS Std. (.375.500) ^ AGS Grooving Capabilities for Original Style Groove (OGS) Carbon Steel.250.500 ^ Stainless Steel Std. (.375) Lt. Wall SS 5S/10S/10 RX Rolls Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used. ^ Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade B, ASTM Grade B, 150 Brinell Hardness Number (BHN) maximum. 42 1050 48 1200 50 1250 60 1500 Section 11 Pipe Preparation Tools VE460 Grooving Rolls * Pipe Material Carbon Steel Standard Wall and Stainless Lt. Wall Stainless Steel RX Lt. Wall Stainless Steel RWX PVC/Aluminum EndSeal Lt. Wall Stainless Steel RX Part Number Pipe Range Purchase List Price Each Set R9Q1460006 4 6 $3246.00 R9Q1460012 8 12 3132.00 RWQ2460024 14 24 AGS 3005.50 RXQ1460006 4 6 7006.50 RXQ1460012 8 12 6211.00 RWQX460018 14 18 AGS 6315.00 RWQX460024 20 24 AGS 6184.00 RPQ1460006 4 6 7181.00 RPQ1460012 8 12 6818.50 RZQ1460006 4 6 6357.00 RZQ1460012 8 12 5356.50 RXQ1460016 14 16 4828.00 RXQ1460020 18 20 7468.00 RXQ1460024 22 24 6269.50 Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 183

Victaulic Fabrication Cell Pipe Preparation Tools Victaulic Fabrication Cell Includes hydraulic adjustable pipe stand and tracks, tool support, two adjustable positioner tables, and an assembly table. Also includes caster wheels and ball transfers. Grooving tools are offered with the package, but are not included in the price of the base package. Section 11 Pipe Preparation Tools The Victaulic Fabrication Cell is designed for 4 24 pipe for single random lengths. Pipe lengths smaller than single randoms require friction slides. Victaulic Fabrication Cell Description Part Number List Price VAP131 Victaulic Fabrication Cell without Grooving Tool Base Package R001131KIT $31254.00 Victaulic Fabrication Cell with Grooving Tool Description Part Number List Price Victaulic Fabrication Cell with VE414MC Roll Grooving Tool R000131414 $66582.00 Victaulic Fabrication Cell with VE460 Roll Grooving Tool R000131460 100073.00 Victaulic Fabrication Components Sold Separately Description Part Number List Price VAP131R Pipe Stand R101131ASY $19353.00 VAP131T Assembly Table R200131ASY 7807.00 VAP131F Positioner R102131ASY 6541.00 Victaulic Fabrication Cell Accessories Description Part Number List Price V-Track Wheels NM05000010 $74.00 V-Track 6-ft. Sections R400131PNT 432.50 Ball Transfers NM28000002 190.50 Ball Transfer Support R301131PNT 190.50 Friction Slide R208131PNT 76.00 Friction Brake R210131ASY 235.00 Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 184

Vic-Easy Tool Accessories VPD752 Power Drive VAPS112 Pipe Stand VAPS224 Pipe Stand Pipe Preparation Tools Vic-Easy Tool Accessories Victaulic Power Drive VPD752 Power drive features safety foot switch and bi-directional speed chuck. Z\x horsepower, 15 amp motor operates on standard 120V power source. VPD753 for single phase, 220V power source also available. Contact Victaulic for pricing. Capacities: See appropriate tool. Optional: Universal Drive Shaft. Required for Cut Groovers. Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price Victaulic Power Drive - VPD752 110V R000752110 140/165 $968.50 $6898.00 Victaulic Power Drive - VPD753 220V R000753220 140/165 968.50 6898.00 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Section 11 Pipe Preparation Tools VAPS112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic- Easy roll grooving tools: VE272SFS, VE268, VE270FSD. Capacities: 1 12 IPS pipe Load Rating: 1075 lbs Vertical Stroke: 14Z\x for adjusting rod; 8Z\x leg adjustment; 23 total Min. Pipe Height from Floor: 23 on 12 pipe; 21 on 1 pipe Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max. Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VAPS 112 R000112PS0 190/220 $725.00 $5225.50 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. VAPS224 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. They are designed for direct use with Vic-Easy roll grooving tools: VE416FS/FSD, VE414MC, VE436MC, VE460. Capacities: 2 24 IPS pipe Load Rating: 1800 lbs Vertical Stroke: 21 Min. Pipe Height from Floor: 14 on 24 IPS pipe Max. Pipe Height from Floor: 39 on 2 IPS pipe Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max. Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VAPS 224 R000224PS0 260/315 $881.00 $7844.50 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 185

VAPS1672 Pipe Stand VE436MC Quick Change Slide Conversion Kit Pipe Preparation Tools Section 11 Pipe Preparation Tools VAPS1672 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation. They are designed for direct use with Vic-Easy roll grooving tools: VE436MC and VE460. Capacities: 16 72 pipe Load Rating: 10000 lbs Vertical Stroke: 17 Min. Pipe Height from Floor: 16 on 72 pipe Max. Pipe Height from Floor: 28 on 16 pipe Tool Weight/ Tool Model Part Number Shipping Weight. Rental Per Month Tool List Price VAPS1672 R0001672PS 480 $5251.00 $18883.50 Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01. VE436MC Quick Change Slide Conversion KIt The VE436MC Quick Change Slide Conversion Kit includes an upper shaft and slide held in place by a detent pin for improved efficiency. The kit also includes 4 12 /100 300 mm standard groove upper rolls, 14 24 /350 600 mm AGS groove upper rolls, pipe size, pipe rotation, guard setting labels, and guard setting pads (standard and AGS). NOTE: Upper rolls only are included with the kit. Lower rolls can be purchased separately. Retain original slide, shaft, set screws and roll grooving assembly for future use. Kit Weight Kit Conversion Kit Part Number List Price VE436MC Quick Change Slide Conversion Kit R150436KIT 106 $8851.00 NOTE: Items listed in shaded areas are non-cancellable and non-returnable Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 186

Cut Grooving Tools VG28GD Cut Grooving Tools Cut Grooving Tools Pipe Preparation Tools Cut Grooving Tools VG28GD (Gear Drive) * Includes tool set for grooving 4 6 standard steel pipe, crate, operating instructions, tool bit removal kit, 10 extension bar, depth stop adjustment tools, and one extra 2 3Z\x and 8 standardgroove steel pipe tool bits. Capacities: 2 8 steel (and other IPS) and 3 6 cast and ductile pipe (Additional bits required) Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VG28GD (Gear Drive) R000281AVG 37/56 $2028.00 $16762.50 * NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories). VG28GD Ratings Section 11 Pipe Preparation Tools Pipe Material Pipe /Schedule VG28GD 2 50 2¹ 2 65 3 80 3¹ 2 90 4 100 5 125 Steel 40 80 * Stainless 40 80 * Aluminum 40 80 * Ductile Iron Class 53 Min. * 6 /150 mm Schedule 8 VG28GD Parts 6 150 8 200 Type Pipe Steel (Aluminum Stainless and other IPS Metallic) AWWA # Cast and Ductile Iron Type Groove Pipe / Tool Bit Marking Part Numbers Purchase 2 3Z\x Std. RK02280003 $290.00 Standard 4 6 Std. RK04280006 290.00 8 Std. RK08280008 290.00 2 3Z\x ES RK02280Z03 290.00 EndSeal 4 6 ES RK04280Z06 290.00 8 ES RK08280Z08 290.00 Standard (Rigid) 3 6 CIR * RK03280G06 565.00 Flexible 3 6 CIF RK03280E06 565.00 # Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening. * Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]). NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 187

VG824 Pipe Preparation Tools VG824 * Includes tool set for grooving 8 12 standard steel pipe, crate, operating instructions, tool bit removal kit, wrench and one extra 8 24 standard groove steel pipe tool bit. Capacities: 8 24 steel (and other IPS) and 8 24 cast and ductile pipe (Additional bits required) Note: Tools bits and stops for D.I. are optional. See below. Section 11 Pipe Preparation Tools Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price VG824 R000824AVG 82/126 $2839.50 $31216.00 * NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories). VG824 Ratings Pipe Material Pipe /Schedule inches/mm VG824 8 200 10 250 12 300 14 350 16 400 18 450 20 500 22 550 Steel Sch. 40 80 Sch. 30 Std. Wall Stainless Sch. 30 Std. Wall Aluminum Sch. 30 Std. Wall Ductile Iron Class 53 Min. 24 600 VG824 Parts Type Pipe Steel (and other IPS Metallic) AWWA # Cast and Ductile Iron Type Groove Tool Bit Pipe Stop Pipe/ Marking Part Numbers Purchase Pipe/ Marking Part Numbers Purchase Std. 8 24 Std. RK08824024 $259.00 8 12 Std. R424824AVG $607.00 14 24 Std. R024824AVG 607.00 EndSeal 8 12 ES RK08824Z12 343.50 8 12 Std. R424824AVG 607.00 8 CIR RK08824G08 343.50 8 CI R524824AVG 607.00 Std. (Rigid) 10 12 CIR RK10824G12 343.50 10 12 CI R024824AVG 607.00 14 CIR RK14824G14 343.50 14 CI R224824AVG 607.00 16 24 CIR RK16824G24 343.50 16 24 CI R324824AVG 607.00 Flexible 8 12 CIF RK08824E12 343.50 8 CI R524824AVG 607.00 14 24 CIF RK14824E24 343.50 10 12 CI R024824AVG 607.00 # Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening. NOTE: Special urethane covered Idler Roll (Part No. R-201-824-AVG) recommended for grooving glass lined pipe. Center adjustable stop (Part. No. R-025-824-AVG) available. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 188

VG412 Pipe Preparation Tools VG412 Orbital Grooving Tool Includes riser blocks and grooving heads for cut grooving 4 12 ductile iron rigid groove. Power drive supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra charge. Capacities: 4 12 ductile iron pipe Note: Tools bits and stops for D.I. are optional. See below. Tool Weight/ Tool Model Part Number Shipping Weight Rental Per Month List Price VG412 Orbital Grooving Tool R000412AVG 270/365 $3038.50 $36806.00 IPS Steel kit for cutting and grooving* (recommended only for lined steel pipe) N003412034 611.00 6080.00 Optional flexible spacer blocks: 4 6 / 114.3 x 168.3 mm N220412667 215.50 8 / 219.1 mm N220412668 232.50 10 12 / 273.0 323.9 N220412669 240.50 * NOTE: Steel grooving kit can only be rented with rental tool. Section 11 Pipe Preparation Tools VG412 Ratings Pipe Material Pipe /Schedule inches/mm VG412 4 100 4¹ 2 120 5 125 6 150 8 200 Steel Sch. 40 80 Ductile Iron Class 53 Min. 10 250 12 300 VG412 Parts Type Pipe AWWA Cast and Ductile Iron # Steel (and other IPS Metallic) Knife Style Pipe Tool Bit Marking Part Numbers Purchase Straight 4 6 N220412680 $377.50 Angled 4 6 N220412568 377.50 Straight 8 12 N220412679 377.50 Angled 8 12 N220412569 377.50 Solid Cut-Off Blade N275412055 116.50 Straight 4 6 N220412678 295.50 Angled 4 6 N220412571 295.50 Angled 8 N220412572 295.50 Straight 8 N220412677 295.50 Angled 10 12 N220412570 295.50 Straight 10 12 N220412676 295.50 Solid Cut-Off Blade N275412055 116.50 # Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 189

VG Vic-Groover Pipe Preparation Tools Section 11 Pipe Preparation Tools VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are supplied with an extra tool bit and ratchet handle. 2 and larger tools include a power yoke. Power yoke is available for C\v and 1 (Part. No. R0240030VG). 1Z\v and 1Z\x (Part No. R0240050VG) tools at $176.50 additional. NOTE: Vic-Groovers not recommended for use with a hand-held power drive. Pipe Standard or ES Tool Complete w/yoke and Extra Tool Bit * Outside VG Tool Part Number Diameter Weight Each Standard * ES Each C\v 1.050 11.0 R0000030VG $1514.50 1 1.315 11.0 R0000040VG 1514.50 1Z\v 1.660 12.0 R0000050VG 1514.50 1Z\x 1.900 12.0 R0000060VG 1514.50 2 2.375 12.0 R0000080VG R00E0080VG 1687.50 2Z\x 2.875 16.0 R0000100VG R00E0100VG 2116.00 3 3.500 16.0 R0000120VG R00E0120VG 2178.50 3Z\x 4.000 18.0 R0000140VG 2371.50 4 4.500 18.0 R0000160VG R00E0160VG 2371.50 5 5.563 25.0 R0000200VG 3278.00 6 6.625 25.0 R0000240VG R00E0240VG 3278.00 8 8.625 45.0 R0000320VG R00E0320VG 3455.50 * Tools for PVC and Stainless Steel add $29.50 to the standard tool price. Part Number Extra Tool Bit Standard ES Standard * ES C\v R0080030VG $152.00 1 R0080030VG 152.00 1Z\v R0080030VG 152.00 1Z\x R0080030VG 152.00 2 R0080030VG R0640080VG 152.00 $195.50 2Z\x R0080030VG R0640080VG 152.00 195.50 3 R0080030VG R0640080VG 152.00 195.50 3Z\x R0080140VG 152.00 + 4 R0080140VG R0640160VG 152.00 209.00 5 R0080200VG 252.00 + 6 R0080200VG R0640240VG 252.00 277.50 8 R0300320VG R0640320VG 102.50 310.50 * Tool bits for PVC and Stainless Steel add $29.50 to the standard tool bit price. VG Tool for Cast Pipe (Gray and Ductile) Style OD Weight Part Number Price 3 Rigid 3.960 20.0 R00R015CVG $3492.00 3 Flexible 3.960 20.0 R00F015CVG 3492.00 4 Rigid 4.800 26.0 R00R019CVG 3492.00 4 Flexible 4.800 26.0 R00F019CVG 3492.00 6 Rigid 6.900 27.0 R00R027CVG 3492.00 6 Flexible 6.900 27.0 R00F027CVG 3492.00 8 Rigid 9.050 40.0 R00R036CVG 5500.50 8 Flexible 9.050 40.0 R00F036CVG 5500.50 Extra Knife for CI Style Part Number Price 3 Rigid/Flexible R008015CVG $541.00 4 Rigid/Flexible R008015CVG 541.00 6 Rigid/Flexible R008015CVG 541.00 8 Rigid/Flexible R030036CVG 541.00 Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 190

Pipe Preparation Tools Vic-Groover Ratings Pipe Material Pipe /Wall Thickness VG46 Individual ³ 4 1 1¹ 4 1¹ 2 2 2¹ 2 3 3¹ 2 4 5 6 8 Steel Sch. 40 80 Stainless Sch. 40 80 Aluminum Sch. 40 80 PVC Sch. 40 80 Ductile Iron VG46 Class 53 Min. Class 53 Min. Section 11 Pipe Preparation Tools Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 191

Pipe Preparation Tool Accessories Power Mule PT-100-A Go/No-Go Pipe Tape Pipe Preparation Tools Pipe Preparation Tool Accessories Section 11 Pipe Preparation Tools Power Mule II (External Power Source) Electrical motor, gear driven, 2 hp power source for all Victaulic cut grooving tools with 1 drive connection, integral safety foot switch and reversible motor (requires 115/1/60-20 amp circuit*). Capacities: Victaulic grooving tools as noted. * 220V optional Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price Power Mule II (External Power Source) R200700MUL 190/205 $2730.50 $16756.50 PT-100-A Go/ No-Go Grooved Pipe Diameter Tape Pocket-sized steel tapes are available for taking circumferential measurements on pipe sizes C\v 24. This diameter tape contains Go/No-Go markings on one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and diameter markings to 100th of an inch on the other side. Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement. Tool Model Part Number Purchase Price PT-100-A/PT-101 Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $62.00 Box of 6 RW75-100-KIT 340.00 NOTICE Tape contains Go/No-Go markings on one side for use with C\v 24 pipe in ANSI B36.19 and many ISO-4200 sizes and is marked in 1/100th of an inch increments on the other side. The Go/No-Go side can be used to check cut or roll grooved pipe conformance to Victaulic original and Machined for Rubber Lining (MRL) (C\v 12 ) and Advanced Groove System (AGS) (14 24 ) groove diameter specifications. Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement. The Go/No-Go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3; 267.4; and 318.5 mm steel or stainless steel pipe sizes. For cast or ductile iron pipe sizes (up to 20 ), copper tube sizes, and the steel and stainless steel pipe sizes listed above, use the side of the tape marked in 0.01 increments. The Go/No-Go pipe tape is a quick reference guide only. To ensure proper grooving dimensions, always refer to the I-100 Victaulic Field Installation Handbook or to the latest groove specifications publications located on. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 192

PT-102 AGS Go/No-Go Pipe Tape Tool Carry Bag Pipe Preparation Tools PT-102 AGS Go/ No-Go Grooved Pipe Diameter Tape Go/No-Go pocket-sized steel tapes are available for taking circumferential measurements on pipe sizes 8 72 /200 1800 mm. Tool Model Part Number Purchase Price PT-102 AGS Go/No-Go Grooved Pipe Diameter Tape RW00102ASY $103.50 NOTICE Tape contains Go/No-Go markings on one side for use with Original Groove System sizes 8 12 /200 300 mm pipe and Advanced Groove System sizes 14 72 /300 1800 mm pipe in ANSI B36.10/B36.19 and many ISO-4200 sizes. In addition, the PT102 contains markings in 0.02 /0.5 mm increments on the opposite side. The opposite side of the diameter tape can be used to check Victaulic original groove specifications in 14 42 /200 1050 mm pipe sized, including China pipe sizes and JIS specifications 8 12 /200 300 mm pipe sizes. The Go/No-Go pipe tape is a quick reference guide only, it is not a replacement for a calibrated diameter measuring instrument. To ensure proper grooving dimensions, always refer to the I-PT102 Victaulic Go/No-Go Pipe Diameter Tape Instructions Manual or to the latest groove specifications publications located on. Section 11 Pipe Preparation Tools Tool Carry Bag Heavy duty tool carry bag for transporting Vic-Easy Roll Grooving Tools, grooving rolls, and other tools. Carry bag can accommodate up to 50 lbs. Tool Weight/ Tool Model Part Number Shipping Weight Tool List Price Tool Carry Bag NM15000002 4/6 $112.50 Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 193

Vic-Adjustable Cut Groovers for PVC Plastic Pipe VPG26 VPG824 Pipe Preparation Tools Vic-Adjustable Cut Grooving Tools for PVC Plastic Pipe Section 11 Pipe Preparation Tools VPG26 Includes Tool with self-contained grooving motor (115/60) and tool bit for Schedule 40 80 PVC, crate, operating instructions and tool bit chuck wrench. Capacities: 2 6 Schedule 40 80 PVC and similar plastic pipe only. Tool Weight/ Tool Model Part Number Shipping Weight Rental Per Month List Price VPG26 Cut Grooving Tool R000283VPG 41/46 $1798.00 $10148.00 Extra tool bits for 2 3Z\x / 60.3 101.6 mm standard radius cut grooving R045283VPG 388.00 Extra tool bits for 4 6 / 114.3 168.3 mm standard radius cut grooving R019283MAC 486.50 VPG26 Ratings Maximum Capacity Pipe Material Pipe /Schedule PVC VPG26 2 50 2Z\x 65 3 80 3Z\x 90 4 100 40 80 PVC 4Z\x 120 5 125 6 150 VPG824 Includes Tool with self-contained grooving motor (115/50) and tool bit for Schedule 40 80 PVC, crate, operating instructions, and tool bit chuck wrench. Capacities: 8 16 Schedule 40 80 PVC and similar plastic pipe only Tool Weight/ Tool Model Part Number Shipping Weight Rental Per Month List Price VPG824 Cut Grooving Tool R000826VPG 47/53 $2936.50 $18029.50 Extra tool bits for 8 16 / 219.1 406.4 mm standard plastic radius cut grooving R023826MAC 536.00 VPG824 Ratings Maximum Capacity PVC Pipe Material Pipe /Schedule VPG824 8 10 12 14 16 40 80 PVC Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 194

Hole Cutting Tools VHCT900 HCT908 Accessories Pipe Preparation Tools Hole Cutting Tools VHCT900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 10 amp electrical supply. (220/1/60 10 amp no cost option) Capacities: 1 3Z\x holes for Z\x 3 Mechanical-T, Vic-Let connections. Tool Model Part Number Tool Weight/ Shipping Weight/ Rental Per Month Tool List Price VHCT900 R000900HCT 36/61 $1572.00 $4816.50 The 1 Arbor is optional. Hole saw blades available from Victaulic. See accessories below. Section 11 Pipe Preparation Tools HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x carbon and stainless steel pipe. This allows for use of Mechanical-T, Vic-Let, Vic-O-Well and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate. Capacities: 1 4Z\x holes for Z\x 4 Mechanical-T, Vic-Let connections. Tool Model Part Number Tool Weight/ Shipping Weight Rental Per Month Tool List Price HCT908 R000908HCT 35/48 $650.00 $2939.00 The 1 Arbor is optional. Hole saw blades available from Victaulic. See accessories below. Accessories Saw Diameter Part Number Purchase List 1 N-M18-000-011 $93.50 1Z\v N-M18-000-016 93.50 1Z\x N-M18-000-021 93.50 1C\v N-M18-000-026 93.50 2 N-M18-000-031 93.50 2C\, N-M18-000-036 104.50 2Z\x N-M18-000-037 104.50 2C\v N-M18-000-040 104.50 3Z\x N-M18-000-047 104.50 4Z\x N-M18-000-050 104.50 Part Name Part Number Purchase List Price Arbor (Mandrel) R-400-900-HCT $254.00 Arbor (1 / 25.4 mm saw only) R-450-900-HCT 360.50 Coupon Retaining Pilot Drill R-402-900-HCT 107.00 Chuck Key Assembly R-314-900-HCT 114.00 Levels N-M14-000-006 69.50 Coupon Remover Assembly R-050-900-HCT 53.00 Long Chain For Vic-Let * R-170-900-HCT 922.50 * For use with VHCT900 to accommodate pipe sizes greater than 610.0 mm. Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 195

Vic-Tap II Hot Tap Vic-Press Tool PFT510 Pipe Preparation Tools Section 11 Pipe Preparation Tools Vic-Tap II * Parts A and B are designed for use with Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi. Part A Includes drill guide base with extended shaft, arbor, pilot drill, 2C\, hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II. Part B Includes drill motor with ground fault interrupt and clip-on feed wheel assembly. Part C Vic-Tap II with 2Z\x full port ball valve factory mounted. Available in sizes 4 x 2Z\x, 5 x 2Z\x, 6 x 2Z\x, and 8 x 2Z\x. Available for purchase only (parts not sold separately). * Parts A & B can be purchased separately. Tool Model Part Number Shipping Weight Rental Per Month List Price VT2 - Parts A and B only R-000-902-VT2 70 $3838.50 $8470.00 Part A only R-100-902-VT2 5777.50 Part B only R-300-901-VT1 5787.50 Part C 4 x 2Z\x / 114.3 x 73.0 mm R-016-931-010 1697.50 5 x 2Z\x / 141.3 x 73.0 mm R-020-931-010 1697.50 6 x 2Z\x / 168.3 x 73.0 mm R-024-931-010 1697.50 8 x 2Z\x / 219.1 x 73.0 mm R-032-931-010 1773.00 NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $605.50. Part. No. N-E15-000-004. Vic-Press Tool PFT510 Vic-Press Tool The Vic-Press tool for ASTM A-312 Schedule 10S stainless steel pipe arrives in 2 carrying cases and includes: Case 1 PFT510 Vic-Press tool, 2 batteries, 120 VAC charger, wire brush, and 1 tube of lubricant Case 2 Z\x, C\v, and 1" jaws, 1Z\x and 2 ring-jaws, ring-jaw adapter jaw, insertion gauge set WARNING: The PFT510 Vic-Press tool is designed for use only with Vic-Press Schedule 10S system couplings, valves and fittings. Do not attempt to install Schedule 5 Carbon Steel Press products with this tool. Failure to follow this instruction could cause system failure resulting in serious personal injury and property damage. Refer to TM-PFT510 for complete tool operating instructions. Tool Weight/ Tool Model Part Number Shipping Weight Tool List Price PFT510 Vic-Press Tool R120510PFT 102 $7975.00 Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 196

Pipe Cut-Off Tools VCT1 Manual VCT2 Automatic Accessories Pipe Preparation Tools Pipe Cut-Off Tools VCT1 VCT1 Manual handles 4 24 pipe up to 0.500 thick. A worm gear drive crank handle provides smooth, manual travel, easy control and accurate cutting. Tools are supplied with one each #00, #0, and #1 acetylene tip. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter. Capacities: 4 24 pipe * Wall Thickness: 0.065 0.0500 (with tips supplied) Tool Weight/ Tool Model Part Number Shipping Weight Tool List Price VCT1 R000911VCT 22/29 $3943.00 * To increase capacity, a 40-inch chain is available for $379.50 (Part No. N-C00-002-VCT). Section 11 Pipe Preparation Tools VCT2 VCT2 Automatic is powered by a 120 VAC motor with SCR remote control. A steel guide rail is recommended for cuts on vertical pipe (over 12 diameter). Tools are supplied with one each #00, #0, and #1 acetylene tips. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter. Capacities: 6 24 pipe * Wall Thickness: 0.065 0.0500 (with tips supplied) Speed Control: SCR Power Required: 120 VAC Motor Rating: 15 W 10,000 rpm NOTE: Guide rail is sold separately. Recommended for pipe 14 and above. Tool Model Part Number Tool Weight/ Shipping Weight List Price VCT2 R000912VCT 33/39 $9517.50 Guide Rail D-600 for up to 24 /610.0 mm pipe NC00170VC2 2506.50 * To increase capacity, a 40-inch chain is available for $379.50 (Part No. N-C00-002-VCT). Accessories VCT1 & VCT2 Standard Tip for Acetylene (102) Part Number 00 N-C00-102-T00 $82.00 0 N-C00-102-0T0 82.00 1 N-C00-102-0T1 82.00 Flashback Arrestor Quick Disconnect Part Number Fuel Assy. ZOSP 2A N-CZS-000-P2A $173.50 Oxy. Assy. ZOSP 1A N-CZS-000-P1A 173.50 Fuel Plug ZOP 2A N-CZ0-000-P2A 113.50 Oxy. Plug. ZOP 1A N-CZ0-000-P1A 113.50 Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools. 197

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback