Crawler Excavator R 92 Operating Weight: 2,2 23,6 kg Engine Output: 15 kw / 143 HP Bucket Capacity:.55 1.15 ³ New engine output
R 92 Operating Weight: 2,2 23,6 kg Engine Output: 15 kw / 143 HP Bucket Capacity:.55-1.15 ³ 2 R 92 Litronic
Perforance Liebherr s R 92 cobines power, precision and versatility. Its characteristics guarantee its excellent perforance in a wide variety of applications, including the toughest. And its oveents attain an unequalled level of soothness and precision thanks to the latest generation hydraulic syste. The R 92 is therefore suitable for both light and heavy daily tasks. The dozing blade, a key feature of this excavator, is added to a vast range of tools and undercarriages which ake it essential. Econoy The grouping together of the aintenance coponents and their accessibility fro ground level reduces intervention ties on the R 92. The autoatic centralised lubrication syste fitted as standard and the intelligent energy anageent increase the excavator s productivity. Therefore the return on investent of the R 92 is guaranteed. Cofort The operator s well-being is a fundaental consideration for Liebherr when developing its products. Liebherr s excavators, including the R 92, all have a quiet, ergonoic and spacious operator s cab that fully satisfies the operator s needs. This outstanding cofort is very highly appreciated. And finally, the enhanced visibility of the achine s direct work environent allows the operator greater peace of ind while perforing their daily work. Reliability With 5 years of experience designing and anufacturing hydraulic crawler excavators, Liebherr France SAS is in a strong position to offer its custoers ever ore reliable achines. The high quality of the product is guaranteed at all the stages, fro design to anufacture, while the safety and cofort of the operator s working conditions have been enhanced even further. This recognized reliability is also to be found in the nuerous services that Liebherr has specifically developed for assisting and satisfying its custoers. R 92 Litronic 3
A Liebherr engine that is even cleaner and with enhanced perforance New engine coplies with the Stage IIIB eission standards Especially designed for construction achine applications The ost cutting-edge technology with the Liebherr Coon-rail syste Autoatic idling syste optiises energy efficiency 4 R 92 Litronic
Perforance Liebherr s R 92 cobines power, precision and versatility. Its characteristics guarantee its excellent perforance in a wide variety of applications, including the toughest. And its oveents attain an unequalled level of soothness and precision thanks to the latest generation hydraulic syste. The R 92 is therefore suitable for both light and heavy daily tasks. The dozing blade, a key feature of this excavator, is added to a vast range of tools and undercarriages which ake it essential. Liebherr integrated systes engineering Cutting-edge technology for high perforance The R 92 excavator incorporates Liebherr s Positive Control hydraulic syste. This syste is controlled by Liebherr electronics and uses strategically-positioned sensors. All of the achine s work is therefore faster, ore accurate and fluid. What s ore, as the two hydraulic pup circuits can operate either separately or together, this optiises the energy anageent of the R 92. Harony between versatility and power Fro power to perforance The Liebherr Tool-Control Syste The excellent productivity and high perforance of the R 92 are the results of intense research. In particular, this achine has a clean and effi cient 15 kw engine that coplies with the requireents of the new Stage IIIB regulations on exhaust gas eissions. The optial kineatics of the attachents allows the R 92 to reach a break-out force of 126 kn and a penetration force of 99 kn, while siultaneously increasing its lifting force. The Tool-Control function akes it easy to change tools thanks to recognition of the chosen tool s syste. It akes the prograed pressure and flow values available fro the oent the hydraulic tool is changed. Consequently, the crawler excavator has ore availability for productive tasks, and adjustent ties are reduced. An effective and accurate dozer blade Radial fan blade Different blade lengths available Ipeccable levelling quality and precision Only two lubrication points Cylinder rod protection as standard Fitted tie-down eyelets Intelligent work odes Econoy ode: for an econoic and ecological operation. Recoended for noral working conditions Power Mode: for high excavation capacities in difficult applications Sensitivity Mode: for accurate load-lifting applications Full Power Mode: especially designed for higher power, ideal for extree applications R 92 Litronic 5
Likufix and Tool-Manageent Ideal for worksites requiring tool changes Mechanical and hydraulic coupling of tools possible without leaving the cab Optiised excavator operation with autoatic tool change syste Intelligent Tool-Manageent option, for autoatic tool detection, pressure and corresponding flow adjustent 6 R 92 Litronic
Econoy The grouping together of the aintenance coponents and their accessibility fro ground level reduces intervention ties on the R 92. The centralised lubrication syste, fitted as standard, and the use of solutions such as Likufix, increase the excavator s productivity. Therefore the return on investent of the R 92 is guaranteed. Indisputable cost-effectiveness in the short, ediu and long-ter Shorter aintenance ties Optiised energy consuption All the aintenance points have been designed for easier access and to ake the daily aintenance operations shorter. The gull-wing doors provide access to the parts fro ground level. The aintenance of ost eleents, such as the air filter, the fuel filters, the engine oil filter and the radiators, is perfored in coplete safety. Grouped together into very distinct copartents, this achine s aintenance will save you tie and increase productivity on your work sites. The engineering of Liebherr s integrated systes and the effective anageent of the engine and hydraulics constantly control fuel consuption. The new diesel engine, autoatic idling, electronic engine speed sensing regulation and regeneration are just soe of the eleents that contribute to better energy anageent. This consuption control iniises the discharge of toxic gases into the atosphere whilst saving on operating costs. The R 92 also coplies with the European Stage IIIB eission regulations with its oxidation catalyst technology. Autoatic centralised lubrication syste as standard Fully autoated centralised lubrication syste as standard for rapid aintenance, less anual lubrication and shorter achine downtie Covers all the lubrication points of the uppercarriage and equipent, other than the connecting link (optional) Adequate lubrication of each joint guaranteed, for a longer service life of the oving parts Safety aspect: the lubrication can be perfored without the operator having to leave the cab LiDAT fleet anageent syste A single point of contact for the coplete anageent of the fleet Optiises your fleet of achines thanks to its overview of the aintenance and service hour reports Fuel consuption onitoring Exact location of achines Iproved safety thanks to predeterined geographic areas and operating ties R 92 Litronic 7
7 colour touch screen Several adjustent, control and onitoring possibilities (fuel consuption display, air-conditioning, tool control, radio, etc.) Robust and reliable design (ingress protection rating IP 65) High resolution video copatibility for displaying the backup caera iages 8 R 92 Litronic
Cofort The operator s well-being is a fundaental consideration for Liebherr when developing its products. Liebherr s excavators, including the R 92, all have a quiet, ergonoic and spacious operator s cab that fully satisfies the operator s needs. This outstanding cofort is very highly appreciated. And finally, the enhanced visibility of the achine s direct work environent allows the operator greater peace of ind while perforing their daily work. When work becoes pleasure A first class work space Sound level and vibrations reduced to a iniu A panoraic view of the whole work area Fully autoatic air-conditioning In this cab, the operator has a pneuatic seat, an enlarged space and a very cofortable work environent. Depending on the operator s needs, the Liebherr Preiu seat can be chosen as an option. This seat offers axiu seating cofort thanks to its pneuatic lubar support, its electronic weightactuated height adjustor and its air-conditioning with activated charcoal and built-in fan. It is especially designed for the operators well-being. To increase work cofort and productivity, the acoustic power inside the operator s cab is only 68 db. The cab is ounted on viscoelastic rivets that ensure the vibrations are fully absorbed. The rubber flanges that support the pipes also actively contribute to reducing external noise. A rear-space caera is fitted in the R 92 counter weight. A display on the 7 high resolution screen allows the operator to work in a secure area. This coplete visibility gives the operator full confidence in the tasks they perfor. Autoatic air-conditioning as standard has ore than 12 adjustable ventilation outlets, for the individual control of air flow. The syste can be controlled via the touch screen. Spacious and cofortable operator s cab Several storage spaces behind the seat, with optional chillers for keeping drinks cool at all ties Fully retractable windscreen, stowable under the roof Fully autoatic air-conditioning with fast de-icing and defogging functions 12 V plug for operating the optional chiller, and all other types of appliances Ergonoic and precise joysticks Sensitive joysticks with proxiity switches allows greater responsiveness while resuing rp Joysticks ergonoically positioned for greater cofort during work and enhanced oveent precision The proportional control allows a very fine anoeuvrability for a sensitive, accurate and ore fluid operation of hydraulic tools R 92 Litronic 9
Key Liebherr coponents Perfect haronisation of the achine s eleents for worksite applications Main echanically-welded structures (undercarriage, attachents, uppercarriage) developed by Liebherr Liebherr anufacturing: - cobustion engine - hydraulic pups - transfer case - transission - orientation echanis - slew ring - electronic coponents 1 R 92 Litronic
Reliability With 5 years of experience designing and anufacturing hydraulic crawler excavators, Liebherr France SAS is in a strong position to offer its custoers ever ore reliable achines. The high quality of the product is guaranteed at all the stages, fro design to anufacture, while the safety and cofort of the operator s working conditions have been enhanced even further. This recognized reliability is also to be found in the nuerous services that Liebherr has specifi cally developed for assisting and satisfying its custoers. Robustness at all levels Better force distribution Tailor-ade attachents Autoatic function Monitoring A 1% Liebherr solution A unique partner Thanks to the connection of the iddle section being extended as far as the ends of the chassis beas, known as the X-design, the forces are better distributed, which increases the service life of the undercarriage. The R 92 s attachents are fitted with oulded steel parts strategically positioned on the joints, aking the suitable for even the ost difficult jobs. This crawler excavator has been specifically designed to withstand ajor stresses. To achieve this robustness, each structure undergoes systeatic siulations and nuerical calculations. The operator can concentrate fully on the task: the integrated on-board electronics ensure a constant readjustent to preset values. The operator can also access the operating paraeters via the onitoring display. By choosing Liebherr, the custoer obtains a coplete solution fro a single supplier, fro the hydraulic excavator, to quick coupler systes, tools and lube oils, all eeting Liebherr s highest quality standards. ROPS protection in the cab Integrated rollover protection syste (ROPS) in cab frae Guarantees the safety of the cab operator in all work situations Liebherr services Peranent stock of ore than 8, ites, available 24/7 on Liebherr-P@rts 24 online web portal, for a lower achine downtie Prograes such as ReMan, ReBuilt and Repair, for a perfect and econoical solution including the anufacturer s warranty and quality Continually-updated personalised docuentation syste R 92 Litronic 11
Long live progress with the R 92 Variety of robust attachents Moulded steel joints for greater stress resistance Parts have a long service life thanks to the autoated lubrication, fitted as standard Wide choice of attachents to adapt the excavator to the custoer s needs A ulti-purpose tool carrier Wide range of specific Liebherr buckets and tools Patented Liebherr tooth syste for increased productivity Likufix quick-change coupling syste for greater flexibility Work in coplete safety Backup caera fitted in the counter-weight, for a clear view and increased operating safety Protected access to the uppercarriage and cab ROPS certified cab frae: rollover resistant Eergency exit through the rear window regardless of the excavator s configuration 12 R 92 Litronic
A very cofortable operating cab Spacious and air-conditioned work space for increased productivity Pneuatic seat as standard 7 high resolution, easy-to-use, colour touch screen Fully retractable window screen The latest technology for heightened perforance New Liebherr Stage IIIB engine technology with oxidation catalyst Autoatic idling and engine cut-off in the event of inactivity Positive Control hydraulic syste with Liebherr electronics for ore accurate and fluid oveents Reduced aintenance tie Copletely new aintenance concept with eleents within ar s reach, accessible fro the ground Filters grouped together for shorter aintenance interventions Adequate lubrication guaranteed thanks to autoatic centralised lubrication syste, fitted as standard A reliable undercarriage Reliable and robust X-shaped undercarriage that is easy to tie down thanks to the integrated eyelets For specific needs, several types of dozing blades available, as well as rubber tracks for urban use Easy to aintain R 92 Litronic 13
Technical Data Engine Rating per ISO 9249 15 kw (143 HP) at 1,8 RPM Model Liebherr D 834 A7 Type 4 cylinder in-line Bore/Stroke 18/125 Displaceent 4.58 l Engine operation 4-stroke diesel Coon-Rail injection syste exhaust-gas recirculation (eagr) Exhaust gas treatent oxidation catalyst eission standard stage IIIB Option Liebherr particle filter Cooling water-cooled and integrated otor oil cooler, after-cooled and fuel cooled Air cleaner dry-type air cleaner with pre-cleaner, priary and safety eleents Fuel tank 341 l Electrical syste Voltage 24 V Batteries 2 x 135 Ah/12 V Starter 24 V/5 kw Alternator three phase current 28 V/11 A Engine idling sensor-controlled Motor anageent connection to the integrated excavator syste controlling via CAN-BUS to the econoical utilisation of the service that is available Hydraulic Syste Hydraulic syste Positive Control. Dual circuit hydraulic syste for independent and need-based quantity allotent via the hydraulic pups; sensor-guided. Features high syste dynaics and sensibility provided by integrated syste controlling Hydraulic pup Liebherr variable displaceent pup built in transversal plate style, in parallel arrangeent with integrated transfer box Max. flow 2 x 173 l/in. Max. pressure 35 bar Pup anageent electronic pup anageent via the integrated syste controlling (CAN-BUS) synchronous to the control block Hydraulic tank 27 l Hydraulic syste ax. 36 l Hydraulic oil filter 1 full flow filter (1 μ) Hydraulic oil cooler copact cooler, consisting of a water cooler, sandwiched with hydraulic oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan MODE selection adjustent of engine and hydraulic perforance via a ode pre-selector to atch application, e.g. for especially econoical and environentally friendly operation or for axiu digging perforance and heavy-duty jobs RPM adjustent stepless adjustent of engine output via RPM at each selected ode Tool Control 1 preadjustable pup flows and pressures for add-on tools Hydraulic Controls The controlling is conducted via the integrated excavator syste technology, input and output odules, counicated via the CAN-BUS with the electronic central unit. Power distribution via control valve with integrated safety valves Servo circuit Attachent and swing proportional via joystick levers Travel with proportionally functioning foot pedals and adjusted with a plugable lever speed pre-selection Additional functions proportional regulation via slide switches or foot pedals Swing Drive Drive by Liebherr swash plate otor, shockless and antireaction Transission Liebherr copact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 12.9 RPM stepless Swing torque 51 kn Holding brake wet ulti-disc (spring applied, pressure released) Operator s Cab Cab ROPS safety cab structure with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safety glass, separate window shades for the sunroof window and windscreen, 12 V plug, storage bins, lunchbox, cup holder Operator s seat Cofort seat, airsprung with autoatic weight adjustent, vertical and horizontal seat daping including consoles and joysticks. Seat and arrests adjustable separately and in cobination, seat heating as standard Control syste ar consoles, swinging with the seat Operation and displays large high resolution colour display with selfexplanatory operation via touch screen, video, versatile adjusting, control and onitoring facilities, e.g. cliate control, ipleent and tool paraeters Air-conditioning standard autoatic air-conditioning, abient air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; abient air and fresh air filters can be easily replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures Noise eission ISO 6396 L pa (inside cab) = 68 db(a) 2/14/EC L WA (surround noise) = 11 db(a) Versions NLC gauge 2, LC standard gauge 2,25 Drive Liebherr swash plate otors with integrated brake valves on both sides Transission Liebherr planetary reduction gears Travel speed low range 3.1 k/h high range 5.9 k/h Net drawbar pull on crawler 171 kn Track coponents B 6, aintenance-free Track rollers/carrier rollers 8/2 Tracks sealed and greased Track pads triple-grouser Digging locks wet ulti-discs (spring applied, pressure released) Brake valves integrated into travel otors Lashing eyes integrated Attachent Type cobination of resistant steel plates and cast steels coponents Hydraulic cylinders Liebherr cylinders with special seal-syste, shock protection Pivots sealed, low aintenance Lubrication autoatic central lubrication syste (except link and tilt geoetry) Hydraulic connections pipes and hoses equipped with SAE splitflange connections Bucket fitted as standard with Liebherr tooth syste 14 R 92 Litronic
Diensions E D A W H C K Q P X V L U Z N S B G R41 J I F U1 L U B B2 G R42 NLC LC A 2,545 2,545 C 3,3 3,3 D 2,515 2,515 E 2,58 2,58 F 1,35 1,225 H 2,46 2,46 I 68 68 J 1,32 1,32 K 1,55 1,55 L 3,655 3,655 P 955 955 Q 49 49 S 2, 2,25 U 4,445 4,445 U1 5,285 5,21 Z 4,74 4,74 N 5 6 75 5 6 75 9 B 2,5 2,6 2,75 2,75 2,85 3, 3,15 B2 2,5 2,6 2,85 2,85 2,85 3, G 2,49 2,66* 2,66* 2,8 2,8 3,* 3,1* E = Tail radius * = Width with reovable steps Mono Boo 5.2 Stick length 2.2 2.4 2.7 3. V 5,75 5,65 5,45 5,25 W 3, 3,5 3,15 3,25 X 8,95 8,95 8,95 8,95 Two-piece Boo 3.5 Stick length 2.2 2.4 2.7 3. V 6,1 5,95 5,75 5,6 W 2,85 2,9 3, 3,2 X 9,3 9,3 9,3 9,3 Offset Mono Boo 5.3 Stick length 2.2 2.4 2.7 3. V 5,7 5,55 5,35 5,2 W 2,95 3,1 3,5 3,3 X 8,85 8,85 8,85 8,85 E D A W H C K Q P X V L U Z N S B G R37 R 92 Litronic 15
Backhoe Bucket with Mono Boo 5.2 ft 1 R44 Digging Envelope 1 2 3 4 3 9 Stick length 2.2 2.4 2.7 3. 25 2 8 7 6 Max. digging depth 5.8 6. 6.3 6.6 Max. reach at ground level 9.5 9.25 9.55 9.85 Max. dup height 6.5 6.2 6.4 6.55 Max. teeth height 9.5 9.15 9.35 9.55 15 5 4 Digging Forces 1 2 3 4 1 5 3 2 1 Digging force ISO kn 99 93 86 8 t 1.1 9.5 8.8 8.1 Breakout force ISO kn 126 126 126 126 t 12.8 12.8 12.8 12.8-5 -1-15 -2-1 -2-3 -4-5 1-6 2 3 4-7 11 1 9 8 7 6 5 4 3 2 1 35 3 25 2 15 1 5 ft Operating Weight and Ground Pressure Operating weight includes basic achine with ono boo 5.2, stick 2.4, quick coupler 48 and bucket.8 3 (635 kg). NLC- without blade with blade Pad width 5 6 75 5 6 75 Weight kg 2,2 2,5 2,9 21,6 21,9 22,3 Ground pressure kg/c 2.51.43.35.55.46.38 LC- without blade with blade Pad width 5 6 75 5 6 75 Weight kg 2,3 2,6 21, 21,75 22,5 22,45 Ground pressure kg/c 2.52.44.36.55.47.38 Buckets Machine stability per ISO 1567* (75% of tipping capacity) NLC- without blade with blade Cutting width Capacity ISO 7451 Weight LC- without blade with blade Stick length () Stick length () Stick length () Stick length () 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 3 kg 65 1).55 48 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 85 1).6 52 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1,5 1).8 6 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1,25 1) 1. 685 Y Y V V Y Y Y V Y Y Y V Y Y Y V 1,4 1) 1.15 755 V V y y Y V V y Y Y V y Y Y V y 65 2).55 515 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 85 2).6 55 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1,5 2).8 635 Y Y Y V Y Y Y Y Y Y Y Y Y Y Y Y 1,25 2) 1. 715 V V V y Y Y V V Y Y Y V Y Y Y V 1,4 2) 1.15 785 y y y v V V y y Y V V y Y Y V y * Indicated loads are based on ISO 1567 ax. stick length, lifted 36 on fir 1) Standard bucket for direct ounting with teeth Z 35 2) Standard bucket for ounting to quick coupler 48 with teeth Z 35 Other backhoes available on request Max. aterial weight Y = 1.8 t/ 3, V = 1.5 t/ 3, y = 1.2 t/ 3, v = not authorized 16 R 92 Litronic
Lift Capacities with Mono Boo 5.2 Stick 2.2 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 2.3* 2.3* NLC with blade 2.3* 2.3* LC without blade 2.3* 2.3* LC with blade 2.3* 2.3* NLC without blade 3.5 4.* 2.* 2.* NLC with blade 3.8 4.* 2.* 2.* LC without blade 4.* 4.* 2.* 2.* LC with blade 4.* 4.* 2.* 2.* NLC without blade 3.4 4.2* 1.9* 1.9* NLC with blade 3.7 4.2* 1.9* 1.9* LC without blade 4. 4.2* 1.9* 1.9* LC with blade 4.2 4.2* 1.9* 1.9* NLC without blade 9. 1.* 5. 6.1* 3.2 4.8* 2.3 4.* 1.9* 1.9* NLC with blade 9.6 1.* 5.3 6.1* 3.5 4.8* 2.4 4.* 1.9* 1.9* LC without blade 1.* 1.* 5.8 6.1* 3.8 4.8* 2.6 4.* 1.9* 1.9* LC with blade 1.* 1.* 6.1* 6.1* 4. 4.8* 2.8 4.* 1.9* 1.9* NLC without blade 4.5 7.4* 3. 5.4* 2.2 4.3 2. 2.* NLC with blade 4.8 7.4* 3.2 5.4* 2.3 4.4* 2.* 2.* LC without blade 5.3 7.4* 3.5 5.4* 2.5 4.4 2.* 2.* LC with blade 5.7 7.4* 3.8 5.4* 2.8 4.4* 2.* 2.* NLC without blade 6.* 6.* 4.3 8.* 2.9 5.7* 2.1 4.2 2. 2.3* NLC with blade 6.* 6.* 4.6 8.* 3.1 5.7* 2.3 4.5* 2.2 2.3* LC without blade 6.* 6.* 5.1 8.* 3.4 5.7* 2.5 4.3 2.3* 2.3* LC with blade 6.* 6.* 5.5 8.* 3.7 5.7* 2.7 4.5* 2.3* 2.3* NLC without blade 7.9 1.* 4.2 7.8* 2.8 5.7* 2.2 2.8* NLC with blade 8.5 1.* 4.5 7.8* 3. 5.7* 2.4 2.8* LC without blade 9.6 1.* 5. 7.8* 3.3 5.7* 2.6 2.8* LC with blade 1.* 1.* 5.4 7.8* 3.6 5.7* 2.8* 2.8* NLC without blade 8. 9.9* 4.3 6.9* 2.9 4.9* 2.7 3.9* NLC with blade 8.6 9.9* 4.6 6.9* 3.1 4.9* 2.9 3.9* LC without blade 9.8 9.9* 5.1 6.9* 3.4 4.9* 3.2 3.9* LC with blade 9.9* 9.9* 5.5 6.9* 3.7 4.9* 3.4 3.9* NLC without blade 6.7* 6.7* 4.5 4.5* 4.2* 4.2* NLC with blade 6.7* 6.7* 4.5* 4.5* 4.2* 4.2* LC without blade 6.7* 6.7* 4.5* 4.5* 4.2* 4.2* LC with blade 6.7* 6.7* 4.5* 4.5* 4.2* 4.2* Stick 2.7 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 1.9* 1.9* 1.8* 1.8* NLC with blade 1.9* 1.9* 1.8* 1.8* LC without blade 1.9* 1.9* 1.8* 1.8* LC with blade 1.9* 1.9* 1.8* 1.8* NLC without blade 1.5* 1.5* NLC with blade 1.5* 1.5* LC without blade 1.5* 1.5* LC with blade 1.5* 1.5* NLC without blade 3.5 3.8* 2.3 3.1* 1.5* 1.5* NLC with blade 3.7 3.8* 2.5 3.1* 1.5* 1.5* LC without blade 3.8* 3.8* 2.7 3.1* 1.5* 1.5* LC with blade 3.8* 3.8* 2.9 3.1* 1.5* 1.5* NLC without blade 8.3* 8.3* 5.1 5.5* 3.2 4.4* 2.3 3.9* 1.5* 1.5* NLC with blade 8.3* 8.3* 5.4 5.5* 3.5 4.4* 2.4 3.9* 1.5* 1.5* LC without blade 8.3* 8.3* 5.5* 5.5* 3.8 4.4* 2.6 3.9* 1.5* 1.5* LC with blade 8.3* 8.3* 5.5* 5.5* 4. 4.4* 2.8 3.9* 1.5* 1.5* NLC without blade 6.2* 6.2* 4.6 6.9* 3. 5.1* 2.1 4.2* 1.6* 1.6* NLC with blade 6.2* 6.2* 4.9 6.9* 3.2 5.1* 2.3 4.2* 1.6* 1.6* LC without blade 6.2* 6.2* 5.4 6.9* 3.5 5.1* 2.5 4.2* 1.6* 1.6* LC with blade 6.2* 6.2* 5.8 6.9* 3.8 5.1* 2.7 4.2* 1.6* 1.6* NLC without blade 6.4* 6.4* 4.2 7.8* 2.8 5.6* 2. 4.2 1.7* 1.7* NLC with blade 6.4* 6.4* 4.6 7.8* 3.1 5.6* 2.2 4.4* 1.7* 1.7* LC without blade 6.4* 6.4* 5.1 7.8* 3.4 5.6* 2.4 4.3 1.7* 1.7* LC with blade 6.4* 6.4* 5.5 7.8* 3.6 5.6* 2.6 4.4* 1.7* 1.7* NLC without blade 7.7 9.1* 4.1 7.9* 2.7 5.7* 2. 4.1 1.9 2.* NLC with blade 8.3 9.1* 4.5 7.9* 3. 5.7* 2.2 4.3* 2.* 2.* LC without blade 9.1* 9.1* 4.9 7.9* 3.3 5.7* 2.4 4.2 2.* 2.* LC with blade 9.1* 9.1* 5.3 7.9* 3.5 5.7* 2.6 4.3* 2.* 2.* NLC without blade 7.8 1.7* 4.1 7.3* 2.8 5.2* 2.3 2.7* NLC with blade 8.4 1.7* 4.5 7.3* 3. 5.2* 2.5 2.7* LC without blade 9.6 1.7* 4.9 7.3* 3.3 5.2* 2.7* 2.7* LC with blade 1.3 1.7* 5.3 7.3* 3.5 5.2* 2.7* 2.7* NLC without blade 8.1* 8.1* 4.3 5.6* 3.2 4.* NLC with blade 8.1* 8.1* 4.6 5.6* 3.5 4.* LC without blade 8.1* 8.1* 5.1 5.6* 3.8 4.* LC with blade 8.1* 8.1* 5.5 5.6* 4.* 4.* 5.3 6.6 7.4 7.9 8. 7.8 7.2 6.3 4.7 6. 7.2 8. 8.4 8.5 8.3 7.8 6.9 5.5 Stick 2.4 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 2.* 2.* NLC with blade 2.* 2.* LC without blade 2.* 2.* LC with blade 2.* 2.* NLC without blade 3.5 3.8* 1.8* 1.8* NLC with blade 3.8 3.8* 1.8* 1.8* LC without blade 3.8* 3.8* 1.8* 1.8* LC with blade 3.8* 3.8* 1.8* 1.8* NLC without blade 3.4 4.1* 2.3 2.5* 1.7* 1.7* NLC with blade 3.7 4.1* 2.5* 2.5* 1.7* 1.7* LC without blade 4. 4.1* 2.5* 2.5* 1.7* 1.7* LC with blade 4.1* 4.1* 2.5* 2.5* 1.7* 1.7* NLC without blade 9.2 9.3* 5. 5.9* 3.2 4.6* 2.3 4.1* 1.7* 1.7* NLC with blade 9.3* 9.3* 5.3 5.9* 3.5 4.6* 2.4 4.1* 1.7* 1.7* LC without blade 9.3* 9.3* 5.8 5.9* 3.8 4.6* 2.6 4.1* 1.7* 1.7* LC with blade 9.3* 9.3* 5.9* 5.9* 4. 4.6* 2.8 4.1* 1.7* 1.7* NLC without blade 4.5 7.2* 3. 5.3* 2.2 4.3 1.8* 1.8* NLC with blade 4.9 7.2* 3.2 5.3* 2.3 4.3* 1.8* 1.8* LC without blade 5.4 7.2* 3.5 5.3* 2.5 4.3* 1.8* 1.8* LC with blade 5.8 7.2* 3.8 5.3* 2.7 4.3* 1.8* 1.8* NLC without blade 6.2* 6.2* 4.3 7.9* 2.9 5.7* 2.1 4.2 1.9 2.* NLC with blade 6.2* 6.2* 4.6 7.9* 3.1 5.7* 2.3 4.5* 2.* 2.* LC without blade 6.2* 6.2* 5.1 7.9* 3.4 5.7* 2.5 4.3 2.* 2.* LC with blade 6.2* 6.2* 5.5 7.9* 3.6 5.7* 2.7 4.5* 2.* 2.* NLC without blade 7.8 9.6* 4.2 7.9* 2.8 5.7* 2.1 2.4* NLC with blade 8.4 9.6* 4.5 7.9* 3. 5.7* 2.3 2.4* LC without blade 9.5 9.6* 5. 7.9* 3.3 5.7* 2.4* 2.4* LC with blade 9.6* 9.6* 5.4 7.9* 3.6 5.7* 2.4* 2.4* NLC without blade 7.9 1.3* 4.2 7.1* 2.8 5.1* 2.5 3.3* NLC with blade 8.5 1.3* 4.5 7.1* 3.1 5.1* 2.7 3.3* LC without blade 9.7 1.3* 5. 7.1* 3.3 5.1* 3. 3.3* LC with blade 1.3* 1.3* 5.4 7.1* 3.6 5.1* 3.2 3.3* NLC without blade 7.3* 7.3* 4.4 5.* 3.8 4.1* NLC with blade 7.3* 7.3* 4.8 5.* 4.1 4.1* LC without blade 7.3* 7.3* 5.* 5.* 4.1* 4.1* LC with blade 7.3* 7.3* 5.* 5.* 4.1* 4.1* Stick 3. 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 1.5* 1.5* NLC with blade 1.5* 1.5* LC without blade 1.5* 1.5* LC with blade 1.5* 1.5* NLC without blade 1.7* 1.7* 1.3* 1.3* NLC with blade 1.7* 1.7* 1.3* 1.3* LC without blade 1.7* 1.7* 1.3* 1.3* LC with blade 1.7* 1.7* 1.3* 1.3* NLC without blade 3.5 3.6* 2.3 3.3* 1.3* 1.3* NLC with blade 3.6* 3.6* 2.5 3.3* 1.3* 1.3* LC without blade 3.6* 3.6* 2.7 3.3* 1.3* 1.3* LC with blade 3.6* 3.6* 2.9 3.3* 1.3* 1.3* NLC without blade 5.1* 5.1* 3.3 4.2* 2.2 3.7* 1.3* 1.3* NLC with blade 5.1* 5.1* 3.5 4.2* 2.4 3.7* 1.3* 1.3* LC without blade 5.1* 5.1* 3.8 4.2* 2.6 3.7* 1.3* 1.3* LC with blade 5.1* 5.1* 4.1 4.2* 2.8 3.7* 1.3* 1.3* NLC without blade 7.9* 7.9* 4.6 6.6* 3. 4.9* 2.1 4.* 1.3* 1.3* NLC with blade 7.9* 7.9* 4.9 6.6* 3.2 4.9* 2.3 4.* 1.3* 1.3* LC without blade 7.9* 7.9* 5.4 6.6* 3.5 4.9* 2.5 4.* 1.3* 1.3* LC with blade 7.9* 7.9* 5.8 6.6* 3.8 4.9* 2.7 4.* 1.3* 1.3* NLC without blade 6.6* 6.6* 4.2 7.6* 2.8 5.4* 2. 4.1 1.5* 1.5* NLC with blade 6.6* 6.6* 4.6 7.6* 3. 5.4* 2.2 4.3* 1.5* 1.5* LC without blade 6.6* 6.6* 5. 7.6* 3.3 5.4* 2.4 4.2 1.5* 1.5* LC with blade 6.6* 6.6* 5.4 7.6* 3.6 5.4* 2.6 4.3* 1.5* 1.5* NLC without blade 7.6 8.7* 4.1 7.9* 2.7 5.6* 2. 4.1 1.7* 1.7* NLC with blade 8.2 8.7* 4.4 7.9* 2.9 5.6* 2.1 4.3* 1.7* 1.7* LC without blade 8.7* 8.7* 4.9 7.9* 3.2 5.6* 2.3 4.2 1.7* 1.7* LC with blade 8.7* 8.7* 5.3 7.9* 3.5 5.6* 2.6 4.3* 1.7* 1.7* NLC without blade 7.7 11.1* 4.1 7.4* 2.7 5.3* 2.1 2.2* NLC with blade 8.3 11.1* 4.4 7.4* 2.9 5.3* 2.2* 2.2* LC without blade 9.4 11.1* 4.9 7.4* 3.2 5.3* 2.2* 2.2* LC with blade 1.1 11.1* 5.3 7.4* 3.5 5.3* 2.2* 2.2* NLC without blade 7.9 8.7* 4.2 6.* 2.8 3.5* NLC with blade 8.5 8.7* 4.5 6.* 3.1 3.5* LC without blade 8.7* 8.7* 5. 6.* 3.4 3.5* LC with blade 8.7* 8.7* 5.4 6.* 3.5* 3.5* 5.6 6.9 7.6 8.1 8.2 8. 7.5 6.6 5.1 6.4 7.6 8.3 8.7 8.8 8.6 8.1 7.3 6. Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The lift capacities on the load hook of the Liebherr quick coupler 48 without attachent are stated in etric tonnes (t), and can be lifted 36 on fir, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 5 /6 * wide triple grouser pads. Indicated loads are based on ISO 1567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are liited through the allowed lift capacity of the load hook on the quick coupler (12 t). Without quick coupler the lift capacities will increase by 25 kg, without bucket cylinder, link and lever they increase by an additional 26 kg. Lifting capacity of the excavator is liited by achine stability and hydraulic capacity. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagra and autoatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories. * with LC- R 92 Litronic 17
Backhoe Bucket with Two-piece Boo 3.5 ft 12 R45 Digging Envelope 1 2 3 4 35 3 25 11 1 9 8 7 Stick length 2.2 2.4 2.7 3. Max. digging depth 5.9 6.1 6.4 6.7 Max. reach at ground level 9.35 9.55 9.85 1.15 Max. dup height 7.25 7.4 7.65 7.9 Max. teeth height 1.35 1.5 1.75 11. 2 6 Digging Forces 1 2 3 4 15 1 5 4 3 Digging force ISO kn 99 93 86 8 t 1.1 9.5 8.8 8.1 Breakout force ISO kn 126 126 126 126 t 12.8 12.8 12.8 12.8 5 2 1 Operating Weight and Ground Pressure -5-1 -2 Operating weight includes basic achine with heavy counterweight, two-piece boo 3.5, stick 2.4, quick coupler 48 and bucket.8 3 (635 kg). -1-3 NLC- without blade with blade -15-2 -25-4 -5 1-6 2 3 4-7 -8 11 1 9 8 7 6 5 4 3 2 1 35 3 25 2 15 1 5 ft Pad width 5 6 75 5 6 75 Weight kg 21,25 21,55 21,95 22,65 22,95 23,35 Ground pressure kg/c 2.54.46.37.58.49.4 LC- without blade with blade Pad width 5 6 75 5 6 75 Weight kg 21,35 21,65 22,5 22,8 23,1 23,5 Ground pressure kg/c 2.54.46.37.58.49.4 Buckets Machine stability per ISO 1567* (75% of tipping capacity) NLC- without blade with blade Cutting width Capacity ISO 7451 Weight LC- without blade with blade Stick length () Stick length () Stick length () Stick length () 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 3 kg 65 1).55 48 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 85 1).6 52 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1,5 1).8 6 Y Y Y V Y Y Y Y Y Y Y Y Y Y Y Y 1,25 1) 1. 685 Y V V y Y Y V V Y Y Y V Y Y Y V 1,4 1) 1.15 755 V y y v V V y y Y V V y Y Y V y 65 2).55 515 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 85 2).6 55 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1,5 2).8 635 Y Y V V Y Y Y V Y Y Y Y Y Y Y Y 1,25 2) 1. 715 V V y y Y V V y Y Y V V Y Y Y V 1,4 2) 1.15 785 y y v v V y y v V V y y Y V V y * Indicated loads are based on ISO 1567 ax. stick length, lifted 36 on fir 1) Standard bucket for direct ounting with teeth Z 35 2) Standard bucket for ounting to quick coupler 48 with teeth Z 35 Other backhoes available on request Max. aterial weight Y = 1.8 t/ 3, V = 1.5 t/ 3, y = 1.2 t/ 3, v = not authorized 18 R 92 Litronic
Lift Capacities with Two-piece Boo 3.5 Stick 2.2 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 4.8* 4.8* 2.2* 2.2* NLC with blade 4.8* 4.8* 2.2* 2.2* LC without blade 4.8* 4.8* 2.2* 2.2* LC with blade 4.8* 4.8* 2.2* 2.2* NLC without blade 5.6* 5.6* 3.7 4.8* 2.* 2.* NLC with blade 5.6* 5.6* 3.9 4.8* 2.* 2.* LC without blade 5.6* 5.6* 4.3* 4.8* 2.* 2.* LC with blade 5.6* 5.6* 4.5 4.8* 2.* 2.* NLC without blade 9.* 9.* 5.7 6.3* 3.8 5.* 2.4 3.3* 1.9* 1.9* NLC with blade 9.* 9.* 6. 6.3* 4. 5.* 2.6 3.3* 1.9* 1.9* LC without blade 9.* 9.* 6.3* 6.3* 4.2 5.* 2.8 3.3* 1.9* 1.9* LC with blade 9.* 9.* 6.3* 6.3* 4.5* 5.* 3. 3.3* 1.9* 1.9* NLC without blade 9.8 11.1* 5.5 7.2* 3.7* 5.4* 2.4 4.3* 1.9* 1.9* NLC with blade 1.2* 11.1* 5.7 7.2* 3.9 5.4* 2.5 4.3* 1.9* 1.9* LC without blade 11.1 11.1* 6.2 7.2* 4.2 5.4* 2.7 4.3* 1.9* 1.9* LC with blade 11.1* 11.1* 6.5 7.2* 4.4 5.4* 2.9 4.3* 1.9* 1.9* NLC without blade 9.6 11.4* 5.4 7.8* 3.5 5.6* 2.3 4.4* 1.8 2.1* NLC with blade 1.* 11.4* 5.7 7.8* 3.8 5.6* 2.4 4.4* 2. 2.1* LC without blade 11. 11.4* 6.1 7.8* 4.1 5.6* 2.7 4.4* 2.1* 2.1* LC with blade 11.4* 11.4* 6.4* 7.8* 4.4 5.6* 2.9 4.4* 2.1* 2.1* NLC without blade 9.1 12.5* 5. 7.8* 3.3 5.6* 2.1 4.3* 1.8 2.3* NLC with blade 9.7 12.5* 5.4 7.8* 3.5 5.6* 2.3 4.3* 2. 2.3* LC without blade 11. 12.5* 5.9 7.8* 3.9 5.6* 2.5 4.3* 2.2 2.3* LC with blade 11.6 12.5* 6.3 7.8* 4.1 5.6* 2.7 4.3* 2.3* 2.3* NLC without blade 8.7 12.9* 4.8 8.* 3.1 5.7* 2. 3.4* 2. 2.8* NLC with blade 9.3 12.9* 5.1 8.* 3.3 5.7* 2.2 3.4* 2.2 2.8* LC without blade 1.6 12.9* 5.6 8.* 3.6 5.7* 2.4 3.4* 2.4 2.8* LC with blade 11.3 12.9* 6. 8.* 3.9 5.7* 2.7 3.4* 2.6 2.8* NLC without blade 8.7 12.8* 4.6 7.8* 2.9 4.5* 2.4 2.7* NLC with blade 9.3 12.8* 4.9 7.8* 3.1 4.5* 2.6 2.7* LC without blade 1.5 12.8* 5.5 7.8* 3.4 4.5* 2.7* 2.7* LC with blade 11.3 12.8* 5.9 7.8* 3.7 4.5* 2.7* 2.7* NLC without blade 7.8* 7.8* 3.9* 3.9* NLC with blade 7.8* 7.8* 3.9* 3.9* LC without blade 7.8* 7.8* 3.9* 3.9* LC with blade 7.8* 7.8* 3.9* 3.9* Stick 2.7 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade 2.4* 2.4* 2.2* 2.2* NLC with blade 2.4* 2.4* 2.2* 2.2* LC without blade 2.4* 2.4* 2.2* 2.2* 4.6 LC with blade 2.4* 2.4* 2.2* 2.2* NLC without blade 3.* 3.* 1.7* 1.7* NLC with blade 3.* 3.* 1.7* 1.7* LC without blade 3.* 3.* 1.7* 1.7* 6.5 LC with blade 3.* 3.* 1.7* 1.7* NLC without blade 3.8 4.3* 1.9* 1.9* 1.5* 1.5* NLC with blade 4. 4.3* 1.9* 1.9* 1.5* 1.5* LC without blade 4.3* 4.3* 1.9* 1.9* 1.5* 1.5* 7.6 LC with blade 4.3* 4.3* 1.9* 1.9* 1.5* 1.5* NLC without blade 5.7* 5.7* 3.7 4.7* 2.5 3.8* 1.5* 1.5* NLC with blade 5.7* 5.7* 3.9 4.7* 2.6 3.8* 1.5* 1.5* LC without blade 5.7* 5.7* 4.2 4.7* 2.8 3.8* 1.5* 1.5* 8.3 LC with blade 5.7* 5.7* 4.4 4.7* 3. 3.8* 1.5* 1.5* NLC without blade 9.8* 11.* 5.5 6.8* 3.7 5.1* 2.4 4.2* 1.5* 1.5* NLC with blade 1.3 11.* 5.7 6.8* 3.9* 5.1* 2.6 4.2* 1.5* 1.5* LC without blade 11.* 11.* 6.2* 6.8* 4.1* 5.1* 2.8 4.2* 1.5* 1.5* 8.7 LC with blade 11.* 11.* 6.5 6.8* 4.3 5.1* 3. 4.2* 1.5* 1.5* NLC without blade 9.5 11.2* 5.3 7.6* 3.6 5.5* 2.3 4.3* 1.6* 1.6* NLC with blade 1.* 11.2* 5.6* 7.6* 3.8 5.5* 2.5 4.3* 1.6* 1.6* LC without blade 1.9 11.2* 6. 7.6* 4.1 5.5* 2.7 4.3* 1.6* 1.6* 8.8 LC with blade 11.2* 11.2* 6.3* 7.6* 4.3 5.5* 2.9 4.3* 1.6* 1.6* NLC without blade 9.3 12.1* 5.1 7.7* 3.3 5.5* 2.2 4.3* 1.6 1.7* NLC with blade 9.9 12.1* 5.4 7.7* 3.6 5.5* 2.4 4.3* 1.7* 1.7* LC without blade 1.9* 12.1* 6. 7.7* 3.9 5.5* 2.6 4.3* 1.7* 1.7* 8.6 LC with blade 11.4 12.1* 6.3 7.7* 4.2 5.5* 2.8 4.3* 1.7* 1.7* NLC without blade 8.7 12.7* 4.8 7.8* 3.1 5.6* 2. 4.* 1.8 2.* NLC with blade 9.3 12.7* 5.1 7.8* 3.4 5.6* 2.2 4.* 1.9 2.* LC without blade 1.6 12.7* 5.6 7.8* 3.7 5.6* 2.4 4.* 2.* 2.* 8.1 LC with blade 11.3 12.7* 6. 7.8* 3.9 5.6* 2.6 4.* 2.* 2.* NLC without blade 8.6 12.9* 4.6 8.1* 2.9 5.2* 2.1 2.6* NLC with blade 9.2 12.9* 5. 8.1* 3.1 5.2* 2.3 2.6* LC without blade 1.4 12.9* 5.5 8.1* 3.4 5.2* 2.5 2.6* 7.3 LC with blade 11.1 12.9* 5.9 8.1* 3.7 5.2* 2.6* 2.6* NLC without blade 8.6 1.5* 4.5 5.6* 2.6* 2.6* NLC with blade 9.2 1.5* 4.8 5.6* 2.6* 2.6* LC without blade 1.5* 1.5* 5.3 5.6* 2.6* 2.6* 5.7 LC with blade 1.5* 1.5* 5.6* 5.6* 2.6* 2.6* 5.8 7. 7.8 8.2 8.3 8.1 7.6 6.7 4.3 Stick 2.4 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade 2.6* 2.6* NLC with blade 2.6* 2.6* LC without blade 2.6* 2.6* 3.9 LC with blade 2.6* 2.6* NLC without blade 2.2* 2.2* 2.* 2.* NLC with blade 2.2* 2.2* 2.* 2.* LC without blade 2.2* 2.2* 2.* 2.* 6. LC with blade 2.2* 2.2* 2.* 2.* NLC without blade 5.1* 5.1* 3.8 4.6* 1.8* 1.8* NLC with blade 5.1* 5.1* 4. 4.6* 1.8* 1.8* LC without blade 5.1* 5.1* 4.3 4.6* 1.8* 1.8* 7.2 LC with blade 5.1* 5.1* 4.5 4.6* 1.8* 1.8* NLC without blade 5.7 6.1* 3.7 4.9* 2.4 3.7* 1.7* 1.7* NLC with blade 6. 6.1* 3.9 4.9* 2.6 3.7* 1.7* 1.7* LC without blade 6.1* 6.1* 4.2 4.9* 2.8 3.7* 1.7* 1.7* 8. LC with blade 6.1* 6.1* 4.4* 4.9* 3. 3.7* 1.7* 1.7* NLC without blade 9.8 11.3* 5.5 7.1* 3.7 5.3* 2.4 4.3* 1.7* 1.7* NLC with blade 1.2* 11.3* 5.7 7.1* 3.9 5.3* 2.6 4.3* 1.7* 1.7* LC without blade 11.1 11.3* 6.2 7.1* 4.1 5.3* 2.8 4.3* 1.7* 1.7* 8.4 LC with blade 11.3* 11.3* 6.5 7.1* 4.4 5.3* 3.* 4.3* 1.7* 1.7* NLC without blade 9.6 11.3* 5.4 7.7* 3.5 5.6* 2.3 4.3* 1.7 1.8* NLC with blade 1. 11.3* 5.6 7.7* 3.8 5.6* 2.5 4.3* 1.8* 1.8* LC without blade 1.9 11.3* 6. 7.7* 4.1 5.6* 2.7 4.3* 1.8* 1.8* 8.5 LC with blade 11.3* 11.3* 6.3 7.7* 4.3* 5.6* 2.9 4.3* 1.8* 1.8* NLC without blade 9.2 12.4* 5.1 7.8* 3.3 5.6* 2.2 4.3* 1.8 2.* NLC with blade 9.8 12.4* 5.4 7.8* 3.6 5.6* 2.3 4.3* 1.9 2.* LC without blade 11.1* 12.4* 5.9 7.8* 3.9 5.6* 2.6 4.3* 2.* 2.* 8.3 LC with blade 11.5 12.4* 6.3 7.8* 4.1 5.6* 2.8 4.3* 2.* 2.* NLC without blade 8.7 12.8* 4.8 7.9* 3.1 5.7* 2. 3.7* 1.9 2.4* NLC with blade 9.3 12.8* 5.1 7.9* 3.3 5.7* 2.2 3.7* 2.1 2.4* LC without blade 1.6 12.8* 5.6 7.9* 3.6 5.7* 2.4 3.7* 2.3 2.4* 7.8 LC with blade 11.3 12.8* 6. 7.9* 3.9 5.7* 2.6 3.7* 2.4* 2.4* NLC without blade 8.6 12.9* 4.6 8.* 2.9 4.8* 2.3 2.7* NLC with blade 9.2 12.9* 5. 8.* 3.1 4.8* 2.5 2.7* LC without blade 1.5 12.9* 5.5 8.* 3.4 4.8* 2.7* 2.7* 7. LC with blade 11.2 12.9* 5.9 8.* 3.7 4.8* 2.7* 2.7* NLC without blade 8.7 9.* 4.4* 4.4* 3.2* 3.2* NLC with blade 9.* 9.* 4.4* 4.4* 3.2* 3.2* LC without blade 9.* 9.* 4.4* 4.4* 3.2* 3.2* 5. LC with blade 9.* 9.* 4.4* 4.4* 3.2* 3.2* Stick 3. 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 3.2* 3.2* 1.5* 1.5* NLC with blade 3.2* 3.2* 1.5* 1.5* LC without blade 3.2* 3.2* 1.5* 1.5* LC with blade 3.2* 3.2* 1.5* 1.5* NLC without blade 3.8* 3.9* 2.5 2.6* 1.3* 1.3* NLC with blade 3.9* 3.9* 2.6* 2.6* 1.3* 1.3* LC without blade 3.9* 3.9* 2.6* 2.6* 1.3* 1.3* LC with blade 3.9* 3.9* 2.6* 2.6* 1.3* 1.3* NLC without blade 4.8* 4.8* 3.7 4.6* 2.5 3.8* 1.3* 1.3* NLC with blade 4.8* 4.8* 3.9 4.6* 2.7* 3.8* 1.3* 1.3* LC without blade 4.8* 4.8* 4.2 4.6* 2.9 3.8* 1.3* 1.3* LC with blade 4.8* 4.8* 4.4* 4.6* 3.1 3.8* 1.3* 1.3* NLC without blade 9.9 1.3* 5.5 6.6* 3.6* 5.* 2.5 4.1* 1.3* 1.3* NLC with blade 1.3* 1.3* 5.7 6.6* 3.8 5.* 2.6 4.1* 1.3* 1.3* LC without blade 1.3* 1.3* 6.2 6.6* 4.1 5.* 2.8 4.1* 1.3* 1.3* LC with blade 1.3* 1.3* 6.5 6.6* 4.3 5.* 3. 4.1* 1.3* 1.3* NLC without blade 9.5 11.1* 5.3 7.4* 3.6 5.4* 2.4 4.2* 1.5 1.7* 1.3* 1.3* NLC with blade 9.9* 11.1* 5.6 7.4* 3.8 5.4* 2.5 4.2* 1.7* 1.7* 1.3* 1.3* LC without blade 1.8* 11.1* 6. 7.4* 4. 5.4* 2.7 4.2* 1.7* 1.7* 1.3* 1.3* LC with blade 11.1* 11.1* 6.3 7.4* 4.2 5.4* 2.9 4.2* 1.7* 1.7* 1.3* 1.3* NLC without blade 9.4 11.8* 5.1 7.6* 3.3 5.5* 2.2 4.2* 1.5* 1.5* NLC with blade 9.9 11.8* 5.5 7.6* 3.6 5.5* 2.4 4.2* 1.5* 1.5* LC without blade 1.8 11.8* 5.9* 7.6* 3.9 5.5* 2.6 4.2* 1.5* 1.5* LC with blade 11.3* 11.8* 6.2 7.6* 4.2 5.5* 2.8 4.2* 1.5* 1.5* NLC without blade 8.7 12.5* 4.8 7.7* 3.1 5.5* 2.1 4.1* 1.6 1.7* NLC with blade 9.3 12.5* 5.1 7.7* 3.4 5.5* 2.2 4.1* 1.7* 1.7* LC without blade 1.6 12.5* 5.6 7.7* 3.7 5.5* 2.4 4.1* 1.7* 1.7* LC with blade 11.3 12.5* 6. 7.7* 4. 5.5* 2.6 4.1* 1.7* 1.7* NLC without blade 8.5 12.9* 4.6 8.* 2.9 5.4* 2. 2.9* 1.9 2.2* NLC with blade 9.1 12.9* 4.9 8.* 3.1 5.4* 2.1 2.9* 2.1 2.2* LC without blade 1.3 12.9* 5.4 8.* 3.4 5.4* 2.4 2.9* 2.2* 2.2* LC with blade 11.1 12.9* 5.8 8.* 3.7 5.4* 2.6 2.9* 2.2* 2.2* NLC without blade 8.6 11.6* 4.4 6.4* 2.8 3.* 2.2* 2.2* NLC with blade 9.2 11.6* 4.8 6.4* 3.* 3.* 2.2* 2.2* LC without blade 1.5 11.6* 5.3 6.4* 3.* 3.* 2.2* 2.2* LC with blade 11.2 11.6* 5.7 6.4* 3.* 3.* 2.2* 2.2* 6.9 7.9 8.6 9. 9.1 8.9 8.4 7.7 6.3 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The lift capacities on the load hook of the Liebherr quick coupler 48 without attachent are stated in etric tonnes (t), and can be lifted 36 on fir, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 5 /6 * wide triple grouser pads with adjusting cylinder in optial position. Indicated loads are based on ISO 1567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are liited through the allowed lift capacity of the load hook on the quick coupler (12 t). Without quick coupler the lift capacities will increase by 25 kg, without bucket cylinder, link and lever they increase by an additional 26 kg. Lifting capacity of the excavator is liited by achine stability and hydraulic capacity. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagra and autoatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories. * with LC- R 92 Litronic 19
Backhoe Bucket with Offset Mono Boo 5.3 ft 35 3 25 2 15 1 11 1 9 8 7 6 5 4 3 R188 Digging Envelope 5 6 7 8 Stick length 2.2 2.4 2.7 3. Max. digging depth 5.85 5.75 6.5 6.35 Max. reach at ground level 8.95 9.15 9.45 9.75 Max. dup height 6.25 6.4 6.6 6.8 Max. teeth height 9.25 9.4 9.6 9.8 1 Stick 2.2, 2 Stick 2.4 3 Stick 2.7, 4 Stick 3. at ax. attachent offset with vertical ditch walls 5-5 2 1-1 -2 Digging Forces 1 2 3 4 Digging force ISO kn 99 93 86 8 t 1.1 9.5 8.8 8.1 Breakout force ISO kn 126 126 126 126 t 12.8 12.8 12.8 12.8-1 -15-2 -3-4 -5-6 5 6 7 8-7 11 1 9 8 7 6 5 4 3 2 1 35 3 25 2 15 1 5 ft 28 1 2 3 4 R 258 Operating Weight and Ground Pressure Operating weight includes basic achine with heavy counterweight, offset ono boo 5.3, stick 2.4, quick coupler 48 and bucket.8 3 (635 kg). NLC- without blade with blade Pad width 5 6 75 5 6 75 Weight kg 21,35 21,65 22,5 22,75 23,5 23,45 Ground pressure kg/c 2.54.46.37.58.49.4 255 4,5 LC- without blade with blade Pad width 5 6 75 5 6 75 Weight kg 21,45 21,75 22,15 22,9 23,2 23,6 Ground pressure kg/c 2.54.46.37.58.49.4 Buckets Machine stability per ISO 1567* (75% of tipping capacity) NLC- without blade with blade Cutting width Capacity ISO 7451 Weight LC- without blade with blade Stick length () Stick length () Stick length () Stick length () 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 2.2 2.4 2.7 3. 3 kg 65 1).55 48 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 85 1).6 52 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1,5 1).8 6 Y Y Y V Y Y Y V Y Y Y V Y Y Y V 1,25 1) 1. 685 Y V V y Y Y V y Y Y V y Y Y V y 1,4 1) 1.15 755 V y y v V V y v Y V y v Y V y v 65 2).55 515 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 85 2).6 55 Y Y Y V Y Y Y V Y Y Y V Y Y Y V 1,5 2).8 635 Y Y V y Y Y V y Y Y V y Y Y V y 1,25 2) 1. 715 V V y v Y V y v Y V y v Y V y v 1,4 2) 1.15 785 y y v v V y v v V y v v V y v v * Indicated loads are based on ISO 1567 ax. stick length, lifted 36 on fir 1) Standard bucket for direct ounting with teeth Z 35 2) Standard bucket for ounting to quick coupler 48 with teeth Z 35 Other backhoes available on request Max. aterial weight Y = 1.8 t/ 3, V = 1.5 t/ 3, y = 1.2 t/ 3, v = not authorized 2 R 92 Litronic
Lift Capacities with Offset Mono Boo 5.3 Stick 2.2 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 1.8* 1.8* NLC with blade 1.8* 1.8* LC without blade 1.8* 1.8* LC with blade 1.8* 1.8* NLC without blade 3.5 3.7* 1.5* 1.5* NLC with blade 3.7* 3.7* 1.5* 1.5* LC without blade 3.7* 3.7* 1.5* 1.5* LC with blade 3.7* 3.7* 1.5* 1.5* NLC without blade 4.9* 4.9* 3.4 4.2* 1.4* 1.4* NLC with blade 4.9* 4.9* 3.6 4.2* 1.4* 1.4* LC without blade 4.9* 4.9* 4. 4.2* 1.4* 1.4* LC with blade 4.9* 4.9* 4.2 4.2* 1.4* 1.4* NLC without blade 9.1 9.7* 4.9 6.* 3.1 4.7* 2.1 3.1* 1.4* 1.4* NLC with blade 9.7* 9.7* 5.3 6.* 3.4 4.7* 2.3 3.1* 1.4* 1.4* LC without blade 9.7* 9.7* 5.8 6.* 3.7 4.7* 2.5 3.1* 1.4* 1.4* LC with blade 9.7* 9.7* 6.* 6.* 4. 4.7* 2.7 3.1* 1.4* 1.4* NLC without blade 4.3 7.* 2.9 5.1* 2. 4.1* 1.5* 1.5* NLC with blade 4.7 7.* 3.1 5.1* 2.2 4.1* 1.5* 1.5* LC without blade 5.2 7.* 3.4 5.1* 2.4 4.1* 1.5* 1.5* LC with blade 5.6 7.* 3.7 5.1* 2.6 4.1* 1.5* 1.5* NLC without blade 7.* 7.* 4. 7.4* 2.7 5.4* 1.9 3.4* 1.7* 1.7* NLC with blade 7.* 7.* 4.3 7.4* 2.9 5.4* 2.1 3.4* 1.7* 1.7* LC without blade 7.* 7.* 4.8 7.4* 3.2 5.4* 2.3 3.4* 1.7* 1.7* LC with blade 7.* 7.* 5.2 7.4* 3.5 5.4* 2.5 3.4* 1.7* 1.7* NLC without blade 7.4 1.3* 3.9 7.1* 2.6 5.1* 2.1 2.1* NLC with blade 8. 1.3* 4.2 7.1* 2.8 5.1* 2.1* 2.1* LC without blade 9.1 1.3* 4.7 7.1* 3.1 5.1* 2.1* 2.1* LC with blade 9.9 1.3* 5.1 7.1* 3.4 5.1* 2.1* 2.1* NLC without blade 7.6 8.3* 4. 6.* 2.7 4.1* 2.6 3.* NLC with blade 8.2 8.3* 4.3 6.* 2.9 4.1* 2.8 3.* LC without blade 8.3* 8.3* 4.8 6.* 3.2 4.1* 3.* 3.* LC with blade 8.3* 8.3* 5.2 6.* 3.5 4.1* 3.* 3.* NLC without blade NLC with blade LC without blade LC with blade Stick 2.7 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 1.3* 1.3* NLC with blade 1.3* 1.3* LC without blade 1.3* 1.3* LC with blade 1.3* 1.3* NLC without blade 3.6 3.7* 1.2* 1.2* NLC with blade 3.7* 3.7* 1.2* 1.2* LC without blade 3.7* 3.7* 1.2* 1.2* LC with blade 3.7* 3.7* 1.2* 1.2* NLC without blade 3.5 3.9* 2.3 2.6* 1.1* 1.1* NLC with blade 3.7 3.9* 2.4 2.6* 1.1* 1.1* LC without blade 3.9* 3.9* 2.6* 2.6* 1.1* 1.1* LC with blade 3.9* 3.9* 2.6* 2.6* 1.1* 1.1* NLC without blade 8.3* 8.3* 5.1 5.5* 3.2 4.4* 2.2 3.8* 1.1* 1.1* NLC with blade 8.3* 8.3* 5.4 5.5* 3.4 4.4* 2.3 3.8* 1.1* 1.1* LC without blade 8.3* 8.3* 5.5* 5.5* 3.8 4.4* 2.6 3.8* 1.1* 1.1* LC with blade 8.3* 8.3* 5.5* 5.5* 4. 4.4* 2.8 3.8* 1.1* 1.1* NLC without blade 7.7* 7.7* 4.4 6.7* 2.9 4.9* 2. 4.* 1.1* 1.1* NLC with blade 7.7* 7.7* 4.8 6.7* 3.1 4.9* 2.2 4.* 1.1* 1.1* LC without blade 7.7* 7.7* 5.3 6.7* 3.4 4.9* 2.4 4.* 1.1* 1.1* LC with blade 7.7* 7.7* 5.7 6.7* 3.7 4.9* 2.6 4.* 1.1* 1.1* NLC without blade 7.2 7.3* 4. 7.3* 2.7 5.2* 1.9 4.1* 1.3* 1.3* NLC with blade 7.3* 7.3* 4.3 7.3* 2.9 5.2* 2.1 4.1* 1.3* 1.3* LC without blade 7.3* 7.3* 4.8 7.3* 3.2 5.2* 2.3 4.1* 1.3* 1.3* LC with blade 7.3* 7.3* 5.2 7.3* 3.5 5.2* 2.5 4.1* 1.3* 1.3* NLC without blade 7.2 9.9* 3.8 7.2* 2.5 5.2* 1.9 3.1* 1.5* 1.5* NLC with blade 7.8 9.9* 4.2 7.2* 2.8 5.2* 2. 3.1* 1.5* 1.5* LC without blade 8.9 9.9* 4.7 7.2* 3.1 5.2* 2.3 3.1* 1.5* 1.5* LC with blade 9.7 9.9* 5. 7.2* 3.3 5.2* 2.5 3.1* 1.5* 1.5* NLC without blade 7.4 9.3* 3.9 6.4* 2.6 4.5* 2.* 2.* NLC with blade 8. 9.3* 4.2 6.4* 2.8 4.5* 2.* 2.* LC without blade 9.1 9.3* 4.7 6.4* 3.1 4.5* 2.* 2.* LC with blade 9.3* 9.3* 5.1 6.4* 3.4 4.5* 2.* 2.* NLC without blade 6.3* 6.3* 4.1 4.4* 3.1* 3.1* NLC with blade 6.3* 6.3* 4.4* 4.4* 3.1* 3.1* LC without blade 6.3* 6.3* 4.4* 4.4* 3.1* 3.1* LC with blade 6.3* 6.3* 4.4* 4.4* 3.1* 3.1* 5.2 6.5 7.3 7.8 7.9 7.7 7.1 6.2 5.9 7.1 7.9 8.3 8.4 8.2 7.7 6.8 5.4 Stick 2.4 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 1.6* 1.6* NLC with blade 1.6* 1.6* LC without blade 1.6* 1.6* LC with blade 1.6* 1.6* NLC without blade 3.6 3.8* 1.4* 1.4* NLC with blade 3.8 3.8* 1.4* 1.4* LC without blade 3.8* 3.8* 1.4* 1.4* LC with blade 3.8* 3.8* 1.4* 1.4* NLC without blade 3.4 4.1* 1.6* 1.6* 1.3* 1.3* NLC with blade 3.7 4.1* 1.6* 1.6* 1.3* 1.3* LC without blade 4. 4.1* 1.6* 1.6* 1.3* 1.3* LC with blade 4.1* 4.1* 1.6* 1.6* 1.3* 1.3* NLC without blade 9.1* 9.1* 5. 5.8* 3.2 4.6* 2.1 3.7* 1.3* 1.3* NLC with blade 9.1* 9.1* 5.3 5.8* 3.4 4.6* 2.3 3.7* 1.3* 1.3* LC without blade 9.1* 9.1* 5.8* 5.8* 3.7 4.6* 2.5 3.7* 1.3* 1.3* LC with blade 9.1* 9.1* 5.8* 5.8* 4. 4.6* 2.7 3.7* 1.3* 1.3* NLC without blade 6.1* 6.1* 4.4 6.9* 2.9 5.* 2. 4.1* 1.4* 1.4* NLC with blade 6.1* 6.1* 4.7 6.9* 3.1 5.* 2.2 4.1* 1.4* 1.4* LC without blade 6.1* 6.1* 5.2 6.9* 3.4 5.* 2.4 4.1* 1.4* 1.4* LC with blade 6.1* 6.1* 5.6 6.9* 3.7 5.* 2.6 4.1* 1.4* 1.4* NLC without blade 7.1* 7.1* 4. 7.4* 2.7 5.3* 1.9 4.1* 1.5* 1.5* NLC with blade 7.1* 7.1* 4.3 7.4* 2.9 5.3* 2.1 4.1* 1.5* 1.5* LC without blade 7.1* 7.1* 4.8 7.4* 3.2 5.3* 2.3 4.1* 1.5* 1.5* LC with blade 7.1* 7.1* 5.2 7.4* 3.5 5.3* 2.5 4.1* 1.5* 1.5* NLC without blade 7.3 1.4* 3.9 7.2* 2.6 5.2* 1.8* 1.8* NLC with blade 7.9 1.4* 4.2 7.2* 2.8 5.2* 1.8* 1.8* LC without blade 9.1 1.4* 4.7 7.2* 3.1 5.2* 1.8* 1.8* LC with blade 9.8 1.4* 5.1 7.2* 3.4 5.2* 1.8* 1.8* NLC without blade 7.5 8.7* 3.9 6.1* 2.6 4.3* 2.4 2.5* NLC with blade 8.1 8.7* 4.3 6.1* 2.9 4.3* 2.5* 2.5* LC without blade 8.7* 8.7* 4.8 6.1* 3.2 4.3* 2.5* 2.5* LC with blade 8.7* 8.7* 5.2 6.1* 3.5 4.3* 2.5* 2.5* NLC without blade 3.7* 3.7* 3.1* 3.1* NLC with blade 3.7* 3.7* 3.1* 3.1* LC without blade 3.7* 3.7* 3.1* 3.1* LC with blade 3.7* 3.7* 3.1* 3.1* Stick 3. 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 3. 4.5 6. 7.5 9. NLC without blade NLC with blade LC without blade LC with blade NLC without blade 2.1* 2.1* 1.1* 1.1* NLC with blade 2.1* 2.1* 1.1* 1.1* LC without blade 2.1* 2.1* 1.1* 1.1* LC with blade 2.1* 2.1* 1.1* 1.1* NLC without blade 1.* 1.* NLC with blade 1.* 1.* LC without blade 1.* 1.* LC with blade 1.* 1.* NLC without blade 3.5 3.7* 2.3 3.*.9*.9* NLC with blade 3.7* 3.7* 2.5 3.*.9*.9* LC without blade 3.7* 3.7* 2.7 3.*.9*.9* LC with blade 3.7* 3.7* 2.9 3.*.9*.9* NLC without blade 5.2* 5.2* 3.2 4.2* 2.2 3.6*.9*.9* NLC with blade 5.2* 5.2* 3.5 4.2* 2.3 3.6*.9*.9* LC without blade 5.2* 5.2* 3.8 4.2* 2.6 3.6*.9*.9* LC with blade 5.2* 5.2* 4.1 4.2* 2.8 3.6*.9*.9* NLC without blade 8.1 9.8* 4.5 6.4* 2.9 4.7* 2. 3.9* 1.* 1.* NLC with blade 8.7 9.8* 4.8 6.4* 3.1 4.7* 2.2 3.9* 1.* 1.* LC without blade 9.8* 9.8* 5.4 6.4* 3.5 4.7* 2.4 3.9* 1.* 1.* LC with blade 9.8* 9.8* 5.7 6.4* 3.7 4.7* 2.6 3.9* 1.* 1.* NLC without blade 7.2 7.5* 4. 7.2* 2.6 5.1* 1.9 4.* 1.1* 1.1* NLC with blade 7.5* 7.5* 4.3 7.2* 2.9 5.1* 2.1 4.* 1.1* 1.1* LC without blade 7.5* 7.5* 4.8 7.2* 3.2 5.1* 2.3 4.* 1.1* 1.1* LC with blade 7.5* 7.5* 5.2 7.2* 3.5 5.1* 2.5 4.* 1.1* 1.1* NLC without blade 7.1 9.5* 3.8 7.2* 2.5 5.2* 1.8 3.9* 1.3* 1.3* NLC with blade 7.7 9.5* 4.1 7.2* 2.7 5.2* 2. 3.9* 1.3* 1.3* LC without blade 8.8 9.5* 4.6 7.2* 3. 5.2* 2.2 3.9* 1.3* 1.3* LC with blade 9.5* 9.5* 5. 7.2* 3.3 5.2* 2.4 3.9* 1.3* 1.3* NLC without blade 7.2 9.7* 3.8 6.5* 2.5 4.7* 1.6* 1.6* NLC with blade 7.8 9.7* 4.1 6.5* 2.7 4.7* 1.6* 1.6* LC without blade 9. 9.7* 4.6 6.5* 3. 4.7* 1.6* 1.6* LC with blade 9.7* 9.7* 5. 6.5* 3.3 4.7* 1.6* 1.6* NLC without blade 7.* 7.* 4. 4.9* 2.7* 2.7* NLC with blade 7.* 7.* 4.3 4.9* 2.7* 2.7* LC without blade 7.* 7.* 4.8 4.9* 2.7* 2.7* LC with blade 7.* 7.* 4.9* 4.9* 2.7* 2.7* 5.5 6.8 7.6 8. 8.1 7.9 7.4 6.5 4.9 6.3 7.5 8.2 8.6 8.7 8.5 8. 7.2 5.9 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The lift capacities on the load hook of the Liebherr quick coupler 48 without attachent are stated in etric tonnes (t), and can be lifted 36 on fir, level supporting surface. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 5 /6 * wide triple grouser pads. Indicated loads are based on ISO 1567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated by *) or are liited through the allowed lift capacity of the load hook on the quick coupler (12 t). Without quick coupler the lift capacities will increase by 25 kg, without bucket cylinder, link and lever they increase by an additional 26 kg. Lifting capacity of the excavator is liited by achine stability and hydraulic capacity. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagra and autoatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories. * with LC- R 92 Litronic 21