Kverneland NG-M 101 F20 Foldable Power Harrow High capacity seedbed preparation with light weight
Kverneland NG-M 101 F20 High output with high class technology and light weight The new Kverneland foldable power harrow NG-M 101 F20 is the ideal implement for mid class tractors up to 200hp. During the development process special emphasis has been given to reliability, performance and a strong trough design. Nonetheless the NG-M 101 F20 stands out for its light weight. The F20 power harrow is available in working widths of 4.0 and 5.0m. The NG-M 101 F20 has the same trough design as used on the rigid NG-M 101 models and is equipped with the same robust conical bearings. This together with a heavy-duty headstock and robust transmission system ensures years of effective and trouble free operation. The new advanced parallelogram hydraulic depth control system guarantees ideal seedbed preparation performance. Like all other Kverneland power harrows the NG-M 101 F20 can be fitted with Quick-Fit tines which can be replaced quickly without tools. For optimum performance the trough design provides a great clearance between the tine holder and trough bottom. This allows residues to pass freely without blocking. The NG-M 101 F20 can be combined with a choice of rear rollers: cage roller, packer roller, flexline and cracker roller.
Parallelogram guided side deflectors With its unique parallel guided linkage, the side deflector can move up and down, following ground contours. If stones are trapped between deflector and outer rotor, the deflector can open via coil spring overload protection. Parallel hydraulic depth adjustment The working depth is adjusted by clips and a hydraulic ram from the tractor seat. A parallelogram linkage ensures that the power harrow is always in a horizontal position to the roller. Therefore, the packer roller scraper bar position is always at a fixed height to the ground, independent from the working depth. Driveline A central mono-speed gearbox and a lateral change gearbox ensure together with 1800Nm automatic clutches in the lateral pto-shafts, a robust driveline up to 200 hp tractors. Standard rotor speed setting is 327 rpm (23/34) at 1000rpm. Optional gears available: 282 rpm (21/36) and 351 (24/33). Levelling bar The levelling bar is fixed to the packer roller beam. Thus it is always positioned at the correct height; no adjustment is needed when the working depth is changed. The position of the bar is fixed by pins and the height can be changed by spindle adjustment. A coil spring prevents overload. Helical tine positioning The tines are arranged at varying angle positions in order to prevent damage and ensure even levelling. The helical tine positioning also reduces peak loads on the driveline and results in smoother running and less fuel consumption. Heavy duty trough construction The proven trough design is taken from the rigid NG-M 101. The 120 x 400mm trough is made from a 5mm profiled steel plate. The 10mm bottom plate is precisely positioning the rotors. In combination with vertical ribs at each rotor, this gives a light but strong and bending resistant trough. The NG-M 101 F20 is equipped with bolt on tines, Quick Fit Tines are available as an option. 30mm gears conical bearings, 47mm distance shaft diameter 40/45mm (upper/lower bearing) 2 standard shaft seals, dirt protection and oil sealing vertical rib 10mm bottom plate single piece shaft and tine carrier bolt on tines or Quick- Fit holder
Technical Specifications Specifications NG-M 401 F20 NG-M 501 F20 Working width (m) 4 5 Transport width (m) 2.50 2.50 Pto - input speed 1000 Rotor speed (rpm) 327 std. (282 and 351 optional) Minimum hp requirement 100 125 Maximum hp allowed 200 Number of rotors 16 20 Number of tines 32 40 Tine dimension 12 x 280 Weight with cage roller 450mm 2100 2640 (kg) Weight with packer roller 500mm (kg) 2370 2970 Overload protection 1800 Nm per lateral drive
Wide in operation - narrow in transport Quick in the field and quick on the road - the NG-M 101 F20 can easily be brought into transport position (2.50m) from the tractor cabin. Kverneland Group Spare Parts Kverneland Group spare parts are designed to give reliable, safe and optimal machinery performance - whilst ensuring a low cost life-cycle. High quality standards are achieved by using innovative production methods and patented processes in all our production sites. The Kverneland Group has a very professional network of partners to support you with service, technical knowledge and genuine parts. To assist our partners, we provide high quality spare parts and an effi cient spare parts distribution worldwide.
Kverneland Group Kverneland Group is a leading international company developing, producing and distributing agricultural machinery and services. Strong focus on innovation allows us to provide a unique and broad product range with high quality. Kverneland Group offers an extensive package of systems and solutions to the professional farming community. The offering covers soil preparation, seeding, forage- and bale equipment, spreading and spraying. The Kverneland product range The Kverneland product range is designed to work under the toughest conditions, day after day, year after year. The wide range includes forage harvesting and feeding equipment, ploughing equipment, soil cultivation, seeding systems and fertiliser spreaders. Kverneland Group UK Ltd. Walkers Lane, Lea Green, St. Helens, Merseyside WA9 4AF, Great Britain Phone + 44 (0) 1744 / 853 200 Kverneland Group Ireland Ltd. Hebron Industrial Estate, Kilkenny Ireland Phone + 353 565 / 1597 Kverneland Group International B.V. c/o Kverneland Group Business Partner 4355 Kvernaland, Norway kvg-international@kvernelandgroup.com AC755755 GB- 07/08 www.kverneland.com