PRODUCTGUIDE 1
02
OFFICIAL WEBSITE Our website is your online source for the latest products, information and announcements from Oriental Motor. Besides a company outline and the general product lineup, the site carries seminar and exhibition schedules, provides information about new products, let you download catalogues for the latest products in PDF format. You can also contact us via the website, to request catalogues and other materials. Sales Network in Southeast Asia: Singapore : www.orientalmotor.com.sg Malaysia : www.orientalmotor.com.my Thailand : www.orientalmotor.co.th India : www.orientalmotor.co.in CUSTOMER SUPPORT CENTRE Dedicated staff will assist you in any inquiries, such as product selection, usage of motor and any other technical issues through phone calls, email, fax and etc. MOTOR SELECTION SERVICES Oriental Motor will assist you with selecting the optimum product for your application. ORDERS AND DELIVERY Orders are accepted by Oriental Motor sales offices and our distributors. You are able to order just one unit of any products available. Some products listed in our general catalogue are well-stocked and Oriental Motor are always ready for quick delivery of even one unit. INSPECTION AND REPAIR Oriental Motor offers free inspection services. Feel free to contact us if you have encountered any problems with Oriental Motor products. If repair is required, we will advise on the charges accordingly. Kindly note that free repair is available if used within warranty conditions. 03
SALES NETWORK In Southeast Asia, Oriental Motor has sales offices in Singapore, Malaysia, Thailand and India selling industrial motors, controllers, motorized actuators, and thermal management products. ORIENTAL MOTOR (INDIA) PVT. LTD. ORIENTAL MOTOR THAILAND ORIENTAL MOTOR MALAYSIA ORIENTAL MOTOR ASIA PACIFIC PTE. LTD. Oriental Motor Sales Office Singapore Singapore Malaysia Kuala Lumpur Penang Thailand Bangkok Lamphun India Bangalore New Delhi Ahmedabad Pune Mumbai Grugaon For more information, kindly contact us at: ORIENTAL MOTOR ASIA PACIFIC PTE. LTD. Regional Headquarters 2 Kaki Bukit Avenue 1, #05-06, Singapore 417938 Tel: +65-6745-7344 Fax: +65-6745-9405 sales@orientalmotor.com.sg ORIENTAL MOTOR (THAILAND) CO., LTD. Headquarters and Bangkok Office 900, 8th Floor Zone C, Tonson Tower, Ploenchit Road, Lumpini, Pathumwan Bangkok 10330, Thailand Tel: +66-2-251-1871 Fax: +66-2-251-1872 sales@orientalmotor.co.th ORIENTAL MOTOR (MALAYSIA) SDN. BHD. Malaysia Headquarters and Kuala Lumpur Office A-13-1, North Point Offices, Mid Valley City, No. 1 Medan Syed Putra Utara 59200 Kuala Lumpur, Malaysia Tel: +60-3-22875778 Fax: +60-3-22875528 sales@orientalmotor.com.my Penang Office Tel: +60-4-6423788 Fax: +60-4-6425788 Lamphun Office Tel: +66-53-582-074 Fax: +66-53-582-076 ORIENAL MOTOR (INDIA) PVT. LTD. No. 810, 8th Floor, Prestige Meridian-1 No. 29, M. G. Road, Bangalore, 560001, India Tel: +91-80-41125586 Fax: +91-80-41125588 sales@orientalmotor.co.in 04
GLOBAL SUPPORT In order to ensure that Oriental Motor products are used without any worries anywhere in the world, we have established local corporations and business bases all over the world. We support our customer's overseas business with a full range of service frameworks before and after the sales. ORIENTAL MOTOR (UK) LTD. ORIENTAL MOTOR (EUROPA) GmbH Europe China, Taiwan, Korea INA ORIENTAL MOTOR CO., LTD. ORIENTAL MOTOR ITALIA s.r.l. ORIENTAL MOTOR (FRANCE) SARL ORIENTAL MOTOR (INDIA) PVT. LTD. ORIENTAL MOTOR (THAILAND) CO., LTD. ORIENTAL MOTOR (MALAYSIA) SDN. BHD. ORIENTAL MOTOR U.S.A. CORP. SHANGHAI ORIENTAL MOTOR CO., LTD. North America, Central and South America TAIWAN ORIENTAL MOTOR CO., LTD. Southeast Asia, India, Oceania ORIENTAL MOTOR ASIA PACIFIC PTE. LTD. Regional Headquarters Sales Office Global Sales Network on 56 Business Bases in 13 Countries We have established direct sales networks by local corporation at 56 business bases in 13 countries. You can order our products directly from local corporations. Minimum order is one item. Full Range of Service Framework We respond to customers' demands with the enhanced service frameworks, such as catalogues, technical seminars, exhibitions, field services, etc. Technical Seminar Field Service 05
Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Standard AC Motors Standard AC motors are used generally as power source for automated equipment, because these motors can be operated easily by connecting the motors to AC power supply. Constant Speed Motors Motorized Actuators Controllers and Network Compatible Products K /K S Series The new lineup of AC motors adopts the latest modern technology together with the valuable feedbacks from countless customers, the K and K S Series sets the new benchmark of standard AC motors around the world. High-strength gears stretches the limits of the motor, allowing greater torque and inertia values. Type Induction, Reversible, Electromagnetic Bake Output Power (W) 6 ~ 100 Frame Size (mm) 60 ~ 90 Power Supply Single-Phase (VAC) Only K Three-Phase (VAC) Only K S 110/115, 220/230 220/230 K Series with Right-Angle Gearhead Best combination of high performance small motor and high strength right angle shaft gearhead. It comes with Hypoid Right-Angle Hollow Shaft JH Gear and Hypoid Right-Angle Solid Shaft JL Gear with 40 W, 60 W, 90 W. 06 Type Induction Output Power (W) 40 ~ 90 Frame Size (mm) 90 Power Supply Single-Phase (VAC) 110/115, 220/230
Constant Speed Motors High Power Induction Motors G3/H2/F3 Series Our collaboration with Nissei s high-powered induction motors suits the needs for large heavy duty applications. With a variety of gearhead combination available, different applications with various requirements can be met. Type Induction, Electromagnetic Brake Output Power (kw) 0.1 ~ 2.2 Frame Size (mm) 134 ~ 300 Power Supply Single-Phase (VAC) 110 ~ 115, 200 ~ 230 Three-Phase (VAC) 200 ~ 240, 400 ~ 415 Watertight, Dust-Resistance Motors FPW Series Designed and constructed for dust and water resistance. The FPW Series geared motor conforms to IP67 rating and are ideal for use in locations where equipment comes in contact with water or needs to be periodically washed with water. Output Power (W) 25 ~ 90 Frame Size (mm) 80 ~ 104 Power Single-Phase (VAC) 100/110/115, 200/220/230 Supply Three-Phase (VAC) 200/220/230 Torque Motor and Power Controller Package TM Series Suitable for winding application and other operations involving tension control, as well as pushing operations. Output Power (W) 3 ~ 20 Frame Size (mm) 60 ~ 90 Power Supply Single-Phase (VAC) 100/110/115, 200/220/230 Power Supply (VDC) for Control 24 G3 Series F3 Series H2 Series Controllers and Network Compatible Products Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Motorized Actuators 07
Brake Pack Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Programmable Controller SB50W Sensor Sensor W1 Electromagnetic Brake Motor Motorized Actuators Controllers and Network Compatible Products SB50W It can be used with induction, reversible, electromagnetic brake and watertight, dust-resistant motors with an output range of 1 W to 90 W. This provides instantaneous stop, forward/reverse operation, electromagnetic brake control and thermal protector open detection functions. Applicable Motor (W) 1 ~ 90 Power Supply Single-Phase (VAC) 100 ~ 230 Power Supply for Control (VDC) 24 08
Speed Control Motors Speed Control motors are motors that allow for the speed to be changed. There are three types of Oriental Motor Speed Control motors including Brushless motors, AC Speed Control motors. Brushless Motors 800r/min Cable Motor 1,500r/min 1,000r/min BMU Series The new brushless motor is a compact, high power, and Output Power (W) 30 ~ 400 Frame Size (mm) 60 ~ 110 Speed Range (r/min) 80 ~ 4000 Power Single-Phase (VAC) 100 ~ 120, 200 ~ 240 Supply Three-Phase (VAC) 200 ~ 240 Control Module 4,000r/min Control Module Controllers and Network Compatible Products Servo Motors Stepping Motors Speed Control Motors Standard AC Motors BLE2 Series BLE2 Series with new lineup: orthogonal-axis hollow hypoid JH gear, legged gearhead JB gear, and parallel shaft gearhead JV gear with high permissible torque and hight strength properties. Motorized Actuators Output Power (W) 120, 200 Frame Size (mm) 90 Speed Range (r/min) 80 ~ 3600 Power Single-Phase (VAC) 100 ~ 120, 200 ~ 240 Supply Three-Phase (VAC) 200 ~ 240 09
Brushless Motors Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Motorized Actuators Controllers and Network Compatible Products AC Speed Control Motors BX Series The highest standard speed control motors-bx Series. It provides the speed control, position control, torque limiting and other extended functions. Output Power (W) 30 ~ 400 Frame Size (mm) 60 ~ 110 Speed Range (r/min) 2 ~ 4000 Power Single-Phase (VAC) 100 ~ 120, 200 ~ 240 Supply Three-Phase (VAC) 200 ~ 240 BLH Series The BLH Series combines a slim, high-power brushless motor with a 24 VDC board-type driver, to meet your space saving needs. Output Power (W) 15 ~ 100 Frame Size (mm) 42 ~ 90 Speed Range (r/min) 100 ~ 3000 Power Supply (VDC) 24 BLV Series The BLV Series is a DC input brushless motor and it consist a driver with output options of 200 W (1/4 HP) to 400 W (1/2 HP). Communication control through I/ O or RS-485 is available to support a wide variety of applications. Output Power (W) 200 ~ 400 Frame Size (mm) 104 Gearhead Frame Size (mm) 110 Power Supply (VDC) 24/48 A tachogenerator for speed detection is included in the AC motor. Speed is controlled with a Speed Controller by using feedback signals from the motor. US2 Series Advanced speed control motor. Sophistication and high performance with greater usability. US2 Series, fullyredesigned from the US Series, has been greatly advanced in all aspects. Output Power (W) 6 ~ 90 Frame Size (mm) 60 ~ 90 90 ~ 1400 (50 Hz), Speed Range (r/min) 90 ~ 1600 (60 Hz) Power Supply Single-Phase (VAC) 110/115, 220/230 DSC Series High Performance without adjustment. Entry model of speed control motors, affordable and compact in size. 10 Output Power (W) 6 ~ 90 Frame Size (mm) 60 ~ 90 Speed Range (r/min) 90 ~ 1400 (50 Hz), 90 ~ 1600 (60 Hz) Power Supply Single-Phase (VAC) 110/115, 220/230 Power Supply for Control (VDC) 24
Stepping Motors Stepping motors are used to achieve precise positioning via digital control. The motor operates by accurately synchronizing with the pulse signal output from the controller to the driver. Stepping motors, with their ability to produce high torque at a low speed while minimizing vibration, are ideal for applications requiring quick positioning over a short distance. Driver Coupling Stepping Motor AC Input AZ Series A mechanical driven sensor is used and requires no battery. The positional information is mechanically managed by the ABZO sensor. This retains the position information even if the power is turned off or the cable between the motor and the driver is removed. Resolution (Standard Type) (P/R) 1000 Holding Torque (N m) 0.3 ~ 52 Frame Size (mm) 40 ~ 90 Power Single-Phase (VAC) 100 ~ 120, 200 ~ 240 Supply Three-Phase (VAC) 200 ~ 240 Stator Rotor Controllers and Network Compatible Products Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Motorized Actuators DC Input AZ Series A mechanical driven sensor is used and requires no battery. The positional information is mechanically managed by the ABZO sensor. This retains the position information even if the power is turned off or the cable between the motor and the driver is removed. Resolution (Standard Type) (P/R) 1000 Holding Torque (N m) 0.02 ~ 10.5 Frame Size (mm) 20 ~ 60 Power Supply (VDC) 24/48 11
5-Phase Stepping Motor and Driver Package Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Motorized Actuators Controllers and Network Compatible Products 5-Phase Stepping Motor AC Input RK Series The RK Series is a space saving motor as it is slim and compact. Compared to the conventional product, it has 500 Holding Torque (N DC Input CVK Series noise in all speed regions. 500 Holding Torque (N DC Input CVK Series SC Type This series of 5-phase stepping motor offers a unique option. 500 Holding Torque (N PKP Series The PKP electrical specifications, more frame sizes, encorder motor solutions. Holding Torque (N 12
2-Phase Stepping Motor and Driver Package DC Input CVK Series 200 Holding Torque (N 2-Phase Stepping Motor PKP Series The PKP electrical specifications, more frame sizes, encorder motor solutions. Holding Torque (N Motorized Actuators Controllers and Network Compatible Products Servo Motors Stepping Motors Speed Control Motors Standard AC Motors 13
Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Motorized Actuators Controllers and Network Compatible Products Servo Motors Servo motors are used to achieve complex drive controls at very high levels of precision. It adopts closed loop control for high reliability and short positioning time for long distance operation can be achieved. Tuning-free AC Servo Motor and Driver Package Standard Type High Speed PJ Geared Type NX Series Smooth operation can be achieved in high inertia loads or belt and pulley application. It is the excellent solution for achieving ease of use in high accuracy requirements. Standard type and PJ geared type are also available. Motor Output Power (W) 50 ~ 750 Resolution (P/R) 100 ~ 100000 Maximum Speed (r/min) 5500 Frame Size (mm) 42 ~ 104 Power Supply Low Speed Single-Phase (VAC) 100 ~ 115, 200 ~ 230 Three-Phase (VAC) 200 ~ 230 Newly developed PJ geared type is designed to achieve high torque and high inertia. Direct coupling with mechanism saves the hassle of designing conventional belt and pulley application. 14
Controllers and Network Converters Stepping motors, servo motors and motorized actuators require a controller (pulse generator) for positioning control. This range of controllers is designed to make full use of the superior characteristics of our motors, to ensure optimum operation. Multi-Axis Network Controller AZ Series A multi-axis driver that can be connected to the motor of AZ Series DC power input. MECHATROLINK-, and EtherCAT drive profiles are available, and also up to 2-axes, 3-axes and 4-axes driver connections are available. Number of Axes 2 ~ 4 Network Type MECHATROLINK-, EtherCAT Power Supply (VDC) 24/48 Stored-Data Type Controllers SG8030J The SG8030J incorporates a jerk limiting control function that minimizes vibrations during motor operation. Maximum operation pulse speed is 200 khz, which is also ideal for driving a motor with microstep. Driver Number of Positioning Data 4 Maximum Frequency (khz) 200 Power Supply (VDC) 24 Driver Pulse Oscillation Dual Axis Control I/O Control Sequence Function Stored-Program Type EMP Series Stored-Data Type SG8030J Air Driver Recessed Mounting Model DIN Rail Mounting Model Controllers and Network Compatible Products Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Network Converters Network Converters The network converter converts host communication protocol to Oriental Motor's original RS-485 communication protocol. You can use a network converter to control Oriental Motor's RS-485 communication-compatible products within the host communication environment. CC-Link-Compatible ver 2: 16 axis max. CC-Link-Compatible ver 1.1: 12 axis max. Number of Axis MECHATROLINK- -Compatible: 16 axis max. MECHATROLINK- -Compatible: 16 axis max. EtherCAT-Compatible: 16 axis max. Size (mm) 100 x 35 x 70 Power Supply (VDC) 24 CC-Link -Compatible ver 2 NETC02-CC CC-Link -Compatible ver 1.1 NETC01-CC MECHATROLINK- -Compatible NETC01-M2 Motorized Actuators MECHATROLINK- -Compatible NETC01-M3 EtherCAT-Compatible NETC01-ECT 15
Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Motorized Actuators A motor is combined with various mechanical components such as a ball screw, belt-and-pulley, and rack-andpinion, to convert the motor rotation to a different type of motion needed to drive the equipment. Oriental Motor has various motorized actuators consisting of a motor assembled with the necessary mechanical components, to meet the various needs of automated devices. Cable Holder Motor Cable Motorized Slider The motorized actuators are equipped with either one of the following systems: 1) System Drive motor adopts a closed loop stepping motor with resolver as a feedback device that eliminates misstep during operation. Motorized Linear Slides Sensor Mounting Bracket Motorized Actuators Controllers and Network Compatible Products Motorized Cylinders AZ Series with KRF Actuator Battery-less Motorized linear sliders equipped with stepping motors, a combination of the Oriental Motor KRF AZ Series products with absolute sensors and THK's KRF deliver assurance and trust. Max. Speed (mm/s) 500 Max. Transportable Mass (kg) 60 Repetitive Positioning Accuracy (mm) ±0.01 Stroke Length (mm) 50 ~ 800 Power Supply (VDC) 24/48 Single-Phase (VAC) 100 ~ 120, 200 ~ 240 Three-Phase (VAC) 200 ~ 240 EAC AZ Series The lightweight, high power motorized cylinder employs the use of aluminium rod. The improved structure is able to achieve high speed positioning movement and better acceleration characteristics. 16 Max. Speed (mm/s) 600 Max. Transportable Mass (kg) 60 Repetitive Positioning Accuracy (mm) ±0.02 Stroke Length (mm) 50 ~ 300 Thrust Force (N) 400 (VDC) 24/48 Power Supply Single-Phase (VAC) 100 ~ 120, 200 ~ 240 Three-Phase (VAC) 200 ~ 240
Compact Linear Actuators CCD Camera DRS2 Series It integrates a stepping motor and a ball screw to achieve linear motion. The ABZO sensor is mounted on the motor, contributing to space saving and wiring saving. Frame Size (mm) 42/60 Max. Speed (mm/s) 200 Max. Transportable Mass (kg) 50 Repetitive Positioning Accuracy (mm) ±0.003/±0.01 Stroke Length (mm) 40/50 Max. Thrust Force (N) 500 Power Supply (VDC) 24/48 X-Y Inspection stage Controllers and Network Compatible Products Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Motorized Actuators 17
Hollow Rotary Actuators Servo Motors Stepping Motors Speed Control Motors Standard AC Motors Dispenser Hollow Rotary Actuators Index Table Motorized Actuators Controllers and Network Compatible Products DG AZ Series The DG Series intergrated hollow rotary tables and stepper motor product lineup now includes models with built-in AZ Series products. The battery-free absolute system positioning contributes to improved productivity and cost reduction. Frame Size (mm) 60 ~ 200 Diameter of Hollow Section (mm) 28 ~ 100 Permissible Torque (N m) 0.9 ~ 50 Power Supply Single-Phase (VAC) 100 ~ 120, 200 ~ 240 Three Phase (VAC) 200 ~ 240 (VDC) 24/48 18
We provide a full range of services to assist our customers, from consideration of a purchase through to aftersales service. Sizing Selection Service We provide motor selection services, such as calculation of torque, to assist our customers in selecting the right motor. Customer Support Centre Dedicated staff provide answers to various questions and advice regarding selection and usage of a motor, technical problems, etc via E-mail or the phone. Showroom An exhibit on the wide array of products is available here. With demonstrations provided, we can also provide technical advice and assist you to select the motor required. * Showroom is available at ORIENTAL MOTOR ASIA PACIFIC PTE LTD Customer Support Centre For Singapore: 1800-8420280 ( Toll Free ) *Support in Vietnamese language is available. For Malaysia: 1800-806161 ( Toll Free ) For Thailand: 1800-888-881 ( Toll Free ) For India: 1800-120-1995 ( Toll Free ) For Other Countries: +65-6842-0280 Operation Hours: 9:00am to 5:30pm Field Service Dedicated service engineers will visit you when assistance is required on the usage of our products. Please feel free to contact the Customer Support center or your nearest sales offices. Technical Seminars Dedicated trainers will go through from the basic motor knowledge to the applied technology and selection of the right motor. In addition, on-site seminars are also available. You can register for our seminars from our Website. Japanese Customer Support Centre Tel: +65-6745-3008 ( Support in Japanese ) Operation Hours: 9:00am to 5:30pm E-mail Address: j-support@orientalmotor.com.sg Web Site Updates and news on our latest products and technical seminars is available. Visitors are welcome to download our New Motion magazines and be part of our E-mailing list. Inspection and Repair Oriental Motor offers free inspection services. Feel free to contact us if you have encountered any problems with or damage to Oriental Motor products. If repair is required, we will advise on the applicable charges. Kindly note that free repair is available if products are used in accordance with the warranty conditions.
ORIENTAL MOTOR ASIA PACIFIC PTE. LTD. 2 Kaki Bukit Avenue 1, #05-06, Singapore 417938 TEL: +65-6745-7344 FAX: +65-6745-9405 ORIENTAL MOTOR (MALAYSIA) SDN. BHD. TEL: +60-3-22875778 FAX: +60-3-22875528 ORIENTAL MOTOR (THAILAND) CO., LTD. 900, 8th Floor Zone C, Tonson Tower, Ploenchit Road, Lumpini, Pathumwan, Bangkok 10330 Thailand TEL: +66-2-251-1871 FAX: +66-2-251-1872 238/4 Moo 4, Tambol Ban-Klang, Amphur Muang, Lamphun 51000 Thailand TEL: +66-(0)53-582-074 FAX: +66-(0)53-582-076 TEL: +60-4-6423788 FAX: +60-4-6425788 ORIENTAL MOTOR (INDIA) PVT.LTD. No.810, 8th Floor, Prestige Meridian-1 No.29, M.G.Road, Bangalore, 560001, India TEL: +91-80-41125586 FAX: +91-80-41125588 Website Information Live chat support is available on Monday to Friday Singapore, Malaysia, India: 9:00am to 5:00pm (SGT) Thailand: 8:30am to 5:30pm (GMT+7) (excluding weekends and public holidays ) Customer Support Centre Toll Free no.: For Singapore: 1800-842-0280 (Vietnamese support is available) For Malaysia: 1800-806-161 For Thailand: 1800-888-881 For India: 1800-120-1995 For other countries: +65 6842-0280 Email: sales@orientalmotor.com.sg Japanese Customer Support Centre Tel: +65-6745-3008 (For South East Asia) Email: j-support@orientalmotor.com.sg Specifications are subject to change without notice. This catalogue was published in June, 2018 For more information please contact: Copyright ORIENTAL MOTOR ASIA PACIFIC PTE. LTD. 2018 Printed in Singapore 17S 7.5k 5500Y SVPG30F