New range Bijur Delimon NOW IN STOCK Lubrication Equipment Minimise downtime and maximise production with Bijur Delimon s range of highly reliable lubrication products and components. Pumps Distribution elements Controllers Monitoring Accessories Deliver the right quantity of lubricant to the right place at the right time, while the machine is in operation.
Lubrication Pumps The L2P Lubricator is a low pressure, manually operated, spring return piston pump. Used with SLR proportioning valves in single line systems, and suitable for up to 10 lubrication points. Lubrication Inlet Filter: 40 micron particle separation. 68046 L2P Lubricator, Manual One Shot C2988C 0.2 Litre 67.45 The L18P Lubricator is a reliable, cost effective manual pump for machine tool applications. A low pressure system for use with SLR proportioning valves for sliders, bearings and bushes, and is suitable for up to 73 lubrication points. Lubrication Inlet Filter: 40 micron particle separation. 68044 L18P Manual Pump 5 bar L18P 1 Litre 119.30 DA Lubricators are manual grease and oil, double-action piston, high pressure pumps for bearings that require an application of lubricant infrequently. A manually-operated pumping unit is used, and may be located on the machine or at any convenient point nearby. Widely used in steel plants, mines and heavy industrial applications. Internal Filter: standard on all models. Pressure Gauge: standard on all models. Level Indicator: standard on all models. DA Grease Lubricators, Dual Line DA5101AC 4kg 1550.55 DA6101AC 6kg 775.05 DA Grease Lubricator, Single Line -20 C to +20 C 68037 21 bar DA5120AC 4kg 760.65 For lubrication at friction points on presses, stamping presses, machine tools, conveyors, etc. Multi-line pump Hand lever actuation Output volume max. 0.5 cm 3 /stroke Discharge pressure max. 25 bar Lubricant: grease 68141 TBD Hand Pumps The G Lubricator is a sealed piston pump that can be fed from an independent oil reservoir. In normal operation, oil is gravity fed from the reservoir to the pump. The unit may be operated by an eccentric cam or a reciprocating part of the machinery being lubricated, with no electric or alternative power required. The G Lubricator is ideal for small gearbox and pinion applications, using the gearbox oil as the supply. 68041 G Lubricator, Sealed Piston Pump 6 to 12 bar 25 bar TBH04A01OA00 0.25 Litre 705.25 TBH05A01OB00 0.65 Litre 796.75 TBH08A01OA00 0.25 Litre 705.25 TBH08A01OB00 0.65 Litre 796.75 The lubrication pump type VB-B are reservoir pumps with a single-action plunger operated by a hand lever. The lubricant reservoir has a capacity of 1, 1.6 or 4 litre. Pump of type VB-B are intended for grease and semifluid grease. Type VB-B grease lubrication pumps have an anti-cavitation plate with a level indicator projecting through the reservoir cover. When the hand lever is in the pressure release position, the delivery outlet is connected to the pumps suction compartment. The pump can be used as a filling pump, or it can be used for single-line, dual-line or progressive systems. When used for dual-line systems, a 4/2-way valve available as an accessory, must be screwed into the delivery connection. In systems, which do not require de-pressurisation (progressive systems, filling and greasing systems), de-pressurisation can be prevented by installing a non-return valve in the main delivery line. With follower piston and optical contents indication Discharge pressure max.: 120 bar Lubricant: grease, liquid grease -20 C to +70 C 68142 VB-B Hand Pumps VBB01A01OA00 1 Litre 705.25 VBB01A01OB00 4 Litre 2063.85 VBB01A01OB01 4 Litre 2709.30 VBB01A01OC00 1.6 Litre 2024.35 Refer to tech sheet for output variations 120 bar 21346 662.85
Lubrication Pumps The Airmatic Lubricator is a simple economic unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is easily adjusted to suit a wide variety of industrial centralised lubrication needs. The unit is for use with cyclic oil lubrication systems, and can be used with single line resistance (SLR), positive displacement injector (PDI), and progressive distribution and injector systems. 5 C to +50 C 68033 Airmatic Lubricators 100 bar AIR1AAA 1 Litre SLR 552.25 AIR1BBH 1 Litre PDI 875.45 AIR4ABA 4 Litre SLR 844.25 AIR4BBB 4 Litre PDI 1143.00 AIR12BBA 12 Litre PDI 1643.70 The MPA Micro Pump is a pneumatically operated miniature piston pump used to deliver lubricant in small, metered quantities. This pump has applications in lubricating cutting tools during various machining operations including drilling, reaming and broaching. The TB-D Pneumatic Pump supports lubrication at friction points for applications such as presses, stamping presses, machine tools and conveyors. The TB-D Pneumatic Pump is suitable for progressive and single line injector systems. Discharge 100 bar (max). Air 2 to 6.5 bar. 68049 TB-D Pneumatic Pumps, 0.5cm 3 Output, BSPP 6.5 bar 0 C to +80 C 68048 150 bar TBP01A01OA00 1.6 Litre 1277.50 TBP01A01OB00 4 Litre 1334.00 TB-D Pneumatic Pumps, 4.5cm 3 Output MPA Micro Pump, Single Injector 5107811E 132.70 MPA Micro Pump, 3 Way Injector, Group Actuation 5107831E 185.85 MPA Micro Pump, 3 Way Injector, Individual Actuation 5107832E 190.55 TBP10A01OA00 1.6 Litre 1277.50 TBP10A01OB00 4 Litre 1334.00 The Spray Mist Lubricator Unit is perfectly adapted for use with different liquids, for applications such as metal cutting, drilling, grinding, cooling or wetting processes and chain lubrication. It comprises a filter with drain, a pressure regulator, an electric solenoid valve, which can be synchronised to the machine or equipment being operated, and a pressurised reservoir with an integrated filter. Separate lines carry air and liquid to jet assemblies. 0 C to +80 C 1 to 3 bar The PulseFire Lubricator is a hydraulically operated, spring return piston pump. It is operated from the hydraulics of the host machine and is typically plumbed into the line of a hydraulic actuator which is regularly operated on the machine. Multiple Outlets: 1-8. 60 to 200 bar PulseFire Lubricator 70000 1/8 M8 x 1 309.15 68052 Mist Lubricator, BSPP UBABB 1/4 1/4 4 Litre 24V DC 1606.00
Lubrication Pumps TM-1 Lubricators are a cost effective and economical electric oil pump for use with up to 20 lubrication points from one pump. Ideally suited for SLR systems. Discharge 1.5 bar to 3.5 bar. Lubrication Inlet Filter: 40 micron particle separation. +5 C to +20 C 3 bar The SureFire II Pump is an automatic, robust and durable electric motor-driven gear pump. Its compact size is designed to fit your space requirements and lubrication demands, and can adapt to a broad range of production machinery. SLR version handles oil. +5 C to +40 C 31 bar 68051 68047 TM-1 Lubricator Pumps with Level Switch C2895 115/230V AC 0.57 Litre 404.65 D3094 115/230V AC 1 Litre 435.60 TM-1 Lubricator Pumps without Level Switch SureFire II Pump, SLR, BSPP SFX2PASNNNAXB 2 Litre 24V DC 1111.90 PDI version handles oil and fluid greases. +5 C to +40 C 31 bar C2798 115/230V AC 0.57 Litre 393.40 D3109 115V AC 1 Litre 408.30 The TM-5 Lubricator Pump is a motor-driven piston pump, spring discharge type. It is extensively used in machine tool applications such as lathes, drilling machines, presses, etc. TM-5 Lubricators are a cost effective and economical electric oil pump for use with up to 50 lubrication points from one pump. Discharge 4.1 bar (max). Lubrication Inlet Filter: 40 micron particle separation. Power: 115/230 V AC. -5 C to +20 C 3 bar 68045 TM-5 Lubricator Pumps with Level Switch 68051 SureFire ll Pumps, PDI, BSPP SFX2PBSNNNCXC 2 Litre 100/115V AC 1491.90 SFX3PBSNNNAXD 3 Litre 200/230V AC 1039.70 The EC-L Lubricator is a multipurpose all electrical oiler system, which is capable of depositing a measured volume of oil from each nozzle (in solid drop form) directly onto a moving part such as the link pin of a roller chain. -25 C to +70 C 25 bar Cycle Time D2986 5/16-24 1 Litre 6.4 Minutes 538.25 D2992 5/16-24 1 Litre 128 Minutes 570.75 TM-5 Lubricator Pumps without Level Switch Cycle Time D2994 1 Litre 6.4 Minutes 528.20 D3189 1 Litre 64 Minutes 521.50 68140 EC-L Lubricator 1000380 1/4 2033.35
Lubrication Pumps The Multiport Lubricator is a compact, rugged, low maintenance, motor-driven electric lubricator with high pressure capabilities, equipped with fixed or adjustable output pumping elements to discharge grease or oil over a wide operating range. Low level switches are optional on this compact unit. -18 C to +50 C Grease: 240 bar Oil: 180 bar The Mul-T-Shot Pump is an air operated pump with multiple lube outlets to serve more than one lubrication point. Designed as an economical means of providing lubricant to several points. Once the number of lube points has been determined, simple modification to the lube piston stop dictates the number of active lube delivery points. Equal and measured amounts of lubricants are dispensed from each outlet independent of outlet back pressure. Features & Benefits Multiple pump outlets. Can handle 1 to 12 lube points through simple pump modification. Outlets are independent of each other, a broken lube line will not affect the other lubrication points being supplied. Equal quantity of lubricant is supplied to each point, regardless of outlet back pressure. Can be used with oil. Independent lube outlet ports allows for different lubricant pressures to be developed. -5 C to +45 C Air 6 bar 68050 Multiport Lubricators MULTI2AA 2 Litre 12V DC 390.20 MULTI4BB 4 Litre 24V DC 646.00 MULTI4BE 4 Litre 220-380V AC 831.25 MULTI8BB 8 Litre 24V DC 801.95 MULTI8BD 8 Litre 220V AC 977.10 The Dynamis Pump has been developed and designed as a multifunction pump for centralised lubrication systems. Due to its compact construction and implementation of the modular system, this pump can be used not only for wind turbines but also in industry, commercial vehicle lubrication and spray lubrication applications such as gears and pinions. -40 C to +75 C 160 bar 68139 Mul-T-Shot Ratio 1000192 M8 x 1 M12 x 1 25:1 619.95 Dynamis Maxx Lubricators are electrically driven piston pumps designed for use with series progressive dividers, single line injectors and multi-line configuration. Dynamis Maxx Lubricators are ideally suited for on-road and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in conditions found in the construction, mining and forestry industries. -30 C to +75 C 300 bar 68038 68053 Dynamis Lubricator Pumps DYNMLA11AD20404 2 Litre 24V DC 1445.95 DYNMLA11AH10807 4 Litre 12V DC 1465.85 DYNMLA11AH20404 4 Litre 24V DC 1504.85 DYNMLA11AH40807 4 Litre 230V AC 1601.75 Dynamis Maxx Lubricators with Follower Plate DYXMLA200F21900 4 Litre 24V DC 1793.85 DYXMLA333G40407 8 Litre 230V AC 2762.30 DYXMLA220I40407 15 Litre 230V AC 2803.10 Dynamis Maxx Lubricator without Follower Plate DYXMLA200P21208 4 Litre 24V DC 1596.30
Lubrication Pumps The FZ-A Lubricator is primarily designed for direct feed applications, for servicing up to 12 lubrication points. These unique lubricators are supplied with pump bodies comprising either a single row of outlets (1-6) or a double row of outlets (1-12). Discharge is adjustable, from 100% to 25% for each outlet or set of outlets via adjusting spindles at the top of the pump body. 68039 FZ-A Lubricator, BSPP 400 bar Drive FZA01A01OA00 8 Litre Shaft 1 1488.70 FZA12A01OD00 2.5 Litre Shaft 12 1867.05 FZA04A12AA00 8 Litre Motor 4 2222.20 FZA01A12AA03 8 Litre Motor 1 2977.40 FZA02A11EA03 8 Litre Motor 2 2573.00 FZ-B Lubricators are typically driven by a flanged, geared motor or via the machine being lubricated through either a ratchet or rotary drive. Maximum permissible speed of the piston plunger is 10 rpm for the rotary drive lubricators and 6 rpm for the ratchet drive. A wide range of transmission ratios are available, making this lubricator adaptable to meet a diversity of machine requirements. Where electrical power is available, the BM-B Pump is ideally suited at the heart of a lubrication system. These pumps are robust for harsh and severe applications, and their compact construction of high-grade steel gives them a long service life. A pressure relief valve is incorporated in to the BM-B Pump. This can be adjusted to control the operating pressure to the centralised lubricating system and protect the pump against excessive back pressures. BM-B Lubricator BMB01A01OA00 8 Litre 0.18 3758.70 BM-B Lubricators with Level Switch -20 C to +75 C Please refer to tech sheet for flow rates and voltage options 68035 400 bar BMB01A01OA01 8 Litre 0.18 4413.95 BMB01A04OB01 15 Litre 0.37 4857.50 68040 FZ-B Lubricator, BSPP Drive FZB01A02OA00 8 Litre Shaft 2023.60 FZB01A10AC01 30 Litre Motor 2980.30 FZB01A12AA03 8 Litre Motor 3251.40 The ZP-6000 Pumps are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as a delivery pump for lubricant in progressive systems. Pipe Connection for Feed Line: M14 x 1.5-30 C to +60 C 68042 ZP-6000 Pump 160 bar ZP616B04LC00 30 Litre 16 3794.05 ZP632B01RC00 30 Litre 16 + 16 5030.95 ZP-6000 Pumps with Ultrasonic Level Switch 200 bar ZP616B02LB01 20 Litre 16 4435.00 ZP61RB01RC01 30 Litre 16 4354.00 BM-B Lubricator with Level Switch & Pressure Gauge BMB01A03OB03 15 Litre 0.37 5022.75 The BS-B Lubricator is primarily used in dual line lubrication systems, where there are a high number of lubrication points, often in highly challenging and extreme operating environments such as steel mills and power stations. The BS-B is highly reliable and can be supplied complete with a geared motor. 68036 BS-B Lubricator 400 bar BSB01A01OA00 60 Litre 0.75 7315.95 BS-B Lubricator with Pressure Gauge BSB01A03OA02 60 Litre 1.5 8158.20 BS-B Lubricators with Level Switch & Pressure Gauge BSB01A02OB03 100 Litre 0.75 8298.80 BSB01A04OB03 100 Litre 1.5 9142.45
Distribution Elements Meter units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit. The lubricator in the system dispenses known amounts of oil to the distribution network and meter units deliver this oil in varying amounts to the bearing points. 68147 Flat Spray Nozzle, Straight, without Monitoring The SDU Spray Nozzle is designed for spraying lubricant onto sliding or moving surfaces. Available in round or flat spray pattern. Valve heating is required to give improved operation, dependent on viscosity. FJB Meter Units, UNF B2494 5/16 5/16 13.95 B2495 5/16 5/16 14.25 B2496 5/16 5/16 11.75 B2497 5/16 5/16 14.90 B2498 5/16 5/16 14.65 B2499 5/16 5/16 16.10 B2500 5/16 5/16 16.05 B6548 5/16 5/16 14.25 ASA Meter Units, BSPT 17841-0 M8 x 1 1/8 18.25 17841-00 M8 x 1 1/8 18.45 17841-1 M8 x 1 1/8 18.40 17841-2 M8 x 1 1/8 18.85 17841-3 M8 x 1 1/8 18.60 17841-3/0 M8 x 1 1/8 20.45 17841-4 M8 x 1 1/8 20.05 17841-5 M8 x 1 1/8 20.05 The ZE-E Injector is designed for single line centralised lubrication systems, and primarily for moving targets such as chain links and conveyors. 10 to 30 bar FTG Meter Units, UNF B2759 5/16 5/32 19.95 B2760 5/16 5/32 19.75 B2761 5/16 5/32 19.50 B2762 5/16 5/32 20.45 B2763 5/16 5/32 19.55 B2765 5/16 5/32 20.40 B6553 5/16 5/32 20.90 FKA Meter Units, NPT B3913 1/8 16.90 B3914 1/8 15.20 B3915 1/8 15.70 B3916 1/8 16.50 B3917 1/8 12.00 B3918 1/8 18.60 B3919 1/8 18.55 B7271 1/8 25.50 The ZE-G Injector delivers a fixed quantity of lubricant at the outlet connection during each discharge cycle. These are available in six discharge rates. 10 to 30 bar 68054 With Heating & Fastening Clamp, BSPP SDU 01 A 00 H 01 1/4 1569.75 With Heating & Fastening Clamp SDU 01 A 03 H 01 1/4 845.15 Without Heating with Fastening Clamp, BSPP SDU 01 A 00 O 01 1/4 192.80 Without Heating or Fastening Clamp, BSPP SDU 03 A 01 O 00 1/4 444.45 68031 Thread M10 x 1 Thread M10 x 1 68028 ZE-E Injectors ZEE01A 10 27.50 ZEE03A 25 24.95 ZEE05A 50 24.95 ZEE10A 100 25.90 ZEE20A 200 25.90 ZE-G Injector, Metric ZEG03A 25 42.70 ZEG05A 50 44.50 ZEG10A 100 44.50 ZEG20A 200 47.30
Distribution Elements The PVB Distributor accurately meters and dispenses lubricant to as many as 20 outlet lines, at operating pressures up to 300 bar. It is a progressive distributor of solid block design for use with oil or grease applications. PVB Distributors are available in sizes ranging from 6 to 20 outlets. -20 C to +120 C With indicator pin: 160 bar Without indicator pin: 300 bar The ZEM series metering elements are positive displacement injectors (PDI) that deliver fixed quantities of lubricant to the attached friction point. Other configurations are available on request. -10 C to +70 C 15 to 45 bar 68029 ZEM Injector 0505 ZEM393PHIH M12 x 1 4 21.20 FL-32 / 33 Injectors are perfectly adapted to lubricate all types of machines with a cyclic sequence. Discharge of each injector is adjustable yet delivers a precise amount of lubricant. 68024 PVB Distributor, BSPP x Metric Maximum +176 C 82 to 238 bar PVB06A01AAA02 6 155.25 PVB08A01AAAA02 8 155.25 PVB14A02AAAAAA03 14 226.45 U-Block Divider valves are especially designed for use in progressive lubrication systems. Several outlet configurations are available to allow you to tailor the divider valve to your specifications. -10 C to +70 C Oil: 60 bar Grease: 150 bar 68026 FL Replacement Injectors for Grease, NPT 27163-R 1/8 61.70 27164-RSS 1/4 122.95 FL-42 / 43 Injectors are perfectly adapted to lubricate all types of machines with a cyclic sequence. Discharge of each injector is adjustable yet delivers a precise amount of lubricant. Maximum +176 C 82 to 238 bar 68025 U-Block Divider Valves, BSPP U4R 4 82.70 U6R 6 89.30 U8R 8 95.90 U12R 12 109.15 68027 FL Injectors for Oil, NPT 27166 1/8 122.15 27165 1/4 85.90
Distribution Elements The ZV-B Distributor is used in dual line systems with a large number of lubrication points and long distances, typically in the steel, mining, paper and power industries. 68057 10 to 400 bar ZV-B Dual Line Distributors Metered Volume cm³ ZVB06A302200 3.0 6 347.15 ZVB08A300100 3.0 8 419.60 ZVB02A153300 1.5 2 211.40 ZVB04A153400 1.5 4 301.20 ZVB06A153500 1.5 6 397.60 ZVB08A153200 1.5 8 516.20 The ZV-C Distributor is used in dual line systems that usually have a large number of lubrication points and long distances, typically found in the steel, mining, paper and power industries. It is available with 1 to 4 outlets, is zinc nickel plated for extra corrosion protection, and is 1,000 hours salt water proof tested. ZV-C Distributors Metered Volume cm³ ZVC02A15 15 2 805.95 ZVC03A15 15 3 1211.85 ZVC04A15 15 4 1242.20 DM Valves are completely hydraulic in operation and will deliver either oil or grease. These dual line valves are also fully and individually adjustable in regard to discharge quantity. Has only two moving parts No springs or check valves -20 C to +90 C 350 bar DM Modular Valves, BSPP -20 C to +120 C 68022 10 to 400 bar Metered Volume cm³ 68023 DMM31A0100 0.2-1.2 1 172.00 DMM32A0100 0.2-1.2 2 219.00 DMM33A0100 0.2-1.2 3 311.60 DMM34A0100 0.2-1.2 4 333.80 DMM41A0100 0.6-2.25 1 142.30 DMM42A0100 0.6-2.25 2 216.80 DMM52A0100 1.5-5.1 2 252.65 DMM62A0100 3.0-14.25 2 376.65 DMM01A0100 6.0-25.5 1 335.30 DDM Valves are completely hydraulic in operation and will deliver either oil or grease. These dual line modular valves are also fully and individually adjustable in regard to discharge quantity. Has only two moving parts No springs or check valves See below for manifolds 68020 DDM Modular Valves Maximum 350 bar Metered Volume cm³ DDM01A2100 0.1-1 96.85 DDM05A2500 0.5-5 111.35 DDM15A1500 3-15 225.15 The SDM Modular Valves are the essence of dual line lubrication systems. They are mounted close to the lubrication points and hydraulically operated by pressure from the first and then the second of the two supply lines. Each module can be individually adjusted to suit the bearing requirements. See below for manifolds 68020 SDM Modular Valves Metered Volume cm³ SDM02A2100 0.2-2 95.25 SDM05A2500 1-10 105.45 SDM15A1500 6-30 217.20 Adaptors can be permanently fixed to the lubrication system pipework before valves are fitted, reducing the possibility of contamination during the installation period. O-ring recesses are fitted into the top of the adaptor so that the fitter can observe the condition of the O-rings when fitting the module. 68021 MA1 Manifold Adaptors, to suit DDM 1 17610 2 48.60 17620 4 60.55 17630 6 71.75 17640 8 76.85 MA5 Manifold Adaptors, to suit DDM5 17710 2 56.45 17720 4 59.45 17730 6 83.85 17740 8 108.50 MA15 Manifold Adaptors, to suit MA15 Maximum 350 bar Maximum 350 bar See tech sheet for thread sizes 17850 2 99.30 17860 4 153.35 17870 1 153.70
Manifolds are for use with Distribution Elements found on page 7. Please refer to tech sheets for more information. Manifolds Aluminium Junction, Metric 22653 M10 x 1 M8 x 1 2 2 3.20 22654 M10 x 1 M8 x 1 2 3 3.55 22655 M10 x 1 M8 x 1 4 2 4.35 22656 M10 x 1 M8 x 1 5 2 5.05 22657 M10 x 1 M8 x 1 6 2 5.40 22658 M10 x 1 M8 x 1 7 2 6.30 22659 M10 x 1 M8 x 1 8 2 12.35 Aluminium Junction Bar, Metric AJ138 M10 x 1 M10 x 1 1 1 6.55 AJ139 M10 x 1 M10 x 1 1 1 7.90 AJ140 M10 x 1 M10 x 1 1 1 9.10 AJ141 M10 x 1 M10 x 1 1 1 11.80 AJ142 M10 x 1 M10 x 1 1 1 12.40 AJ144 M10 x 1 M10 x 1 1 1 14.90 68143 Junction Bars, NPT B3262 1/8 1/8 2 2 3.00 68144 Junction Bars Single Sided, Metric 20348-10 M8 x 1 M8 x 1 8 2 5.30 20348-4 M8 x 1 M8 x 1 2 2 2.75 20348-5 M8 x 1 M8 x 1 3 2 2.90 20348-6 M8 x 1 M8 x 1 4 2 3.15 20348-7 M8 x 1 M8 x 1 5 2 3.80 Junction Bar Single Sided, UNF B3263 5/16 5/16 3 2 3.35 B3264 5/16 5/16 4 2 3.70 B3265 5/16 5/16 6 2 4.95 B4508 5/16 5/16 7 2 6.15 B3704 5/16 5/16 8 2 6.85 B3471 5/16 5/16 10 2 7.80 68146 Junction Bar Double Sided, UNF B3109 5/16 5/16 6 2 3.15 B3254 5/16 5/16 8 2 5.65
Controllers & Monitoring The SA-K Changeover Valve is for dual line and single line central lubrication systems. The design of the 4/2 way valve ensures a permanent exchange of the lubricant in all channels of the appliance. The permanent exchange is to avoid operating troubles resulting from ageing and hardening of the lubricant, which are due to oil separation from the grease and the resulting soap concentration. The DR-4 is a 4 port, 2 position hydraulically operated directional control valve for use with dual line systems (electric and pneumatic). Available with micro switch or proximity switch monitoring. -20 C to +100 C 40 to 350 bar 68019 Thread size 3/8 SA-K Changeover Valve SAK25A0000 250 993.05 SAK35A0000 350 1029.05 Thread size 3/8 SA-K Changeover Valve with Limit Switch SAK25A0100 3/8 250 1077.05 SAK35A0100 3/8 350 1113.05 SA-K Changeover Valve with Two Monitoring Switches SAK25A0200 3/8 250 1413.10 68013 DR-4 Way Dual Line System Valve with Switch 33601 3/8 896.90 DR-4 Way Dual Line Non-return System Valve, without Switch 33602 3/8 924.50 The SG-A Switching Device is used as a differential pressure switch in dual line centralised lubrication systems. When the differential pressure is 50 bar, and/or 100 bar, it releases a pulse for the actuation of the directional control valve or for the monitoring of the system. 68017 Supplied in a steel cover. Excludes outlet fittings. SG-A Switching Devices SGA05A00 50 613.15 SGA10A00 100 655.20
Controllers & Monitoring The SMDC Controller is a multipurpose programmable controller used with on-board mobile lubrication systems. The unit is energised by the vehicle or machine s ignition switch. Controller settings are saved whenever power is interrupted. Up to four operating modes can be selected, which allows the controller to be used with various system designs. A voltage selector switch is located inside the enclosure for both 12 and 24V DC service. The SMAC Controller is a multipurpose programmable controller used with industrial lubrication systems. Settings are saved whenever power is interrupted. Up to four operating modes can be selected which allows the controller to be used with various lubrication system designs. -20 C to +55 C 68011 SMAC Controllers -20 C to +40 C 68012 SMDC Controller 33346E 12V DC or 24V DC 175.40 22361-E1 220V AC 204.45 22361-E2 110V AC 198.90 The SC400 Lubrication Controller offers multi-system functionality. Two independent lubrication zones may be programmed with a single controller, plus control of one automatic reservoir fill system. The SC400 operates in any five system modes: Positive displacement injector Single line injector CE approved -10 C to 55 C 5075 psi (350 bar) 5075 psi (350 bar) The DS405 ipm Lubrication Monitor has 24 configurable channels with real-time logging, storage flow monitoring at the bearing, and data capture of automatic oil and grease systems. It is typically used across heavy and light industries. Includes external USB for downloading data. Mains Input Power Supply Range: 85-265V AC, 50/60 Hz universal input 0.85a, protection 2 amp Control Voltage Power Supply: 24V DC, protection 2 amp 68008 DS405 ipm Lubrication Monitor, Standard Unit 95408 1632.55 DS405 ipm Lubrication Monitor, Bluetooth Unit 95409 1692.65 The 55105 Lube Point Monitor is designed for mounting at or near the lubrication point inlet. The monitoring of the 55105 can be achieved via any PLC. The feedback will ensure that the lubricant has reached the inlet of critical lubrication points. -20 C to 70 C 68009 Lube Point Monitor, BSPP -10 C to + 55 C -10 C to + 55 C 700 bar 55105-B 462.15 Oval Type Flow Meters are a complete flow measurement and monitoring system for recirculating oil systems. The method of measurement is based on the rotation of special oval designed gears - the speed of which changes in proportion to the flow of oil through the meter. This gives a visual indication of the flow rate through the transparent cover and also sends electrical pulse signals to an electronic monitor or PLC to provide actual flow meters. This also provides information to allow either low or high flow monitoring to be provided. Compatible with DS405 ipm Lubrication Monitor. 68010 SC400 Controller 68209 Oval Type Flow Meter Maximum +80 C 10 bar 98000 1142.85 SR10-7844-D 10 1276.50
Spring Greasers Models 205 and the 260 feature clear, polycarbonate reservoir and base allows for visual inspection of the unit s internal workings. Assembled with medium springs; 3 additional light and heavy springs are included in each box of 10. Extra heavy springs (orange) are available for applications requiring the use of an extension or for high pressure flushing applications. Model 260 is individually boxed with 2 additional springs (heavy and light). Specifications Polycarbonate domes and bases. Thread size is 1/8 N.P.T. Operating temperature range: -10ºF to +250ºF (-23ºC to +121ºC) Brushes Brush assemblies are suitable for lubricating various moving machine components such as chains, cams, open gears, etc. Oil flow to each brush must be controlled by a meter unit or a control unit. Round, NPT Female 50955 1/8 Nylon 6.25 Figure 3, Male, UNF -30 C to 95 C B7491L 5/16-24 Brass 20 x 4 27.05 B7491 5/16-24 Nylon 20 x 4 23.00 Available with nylon and brass bristles. Refillable 0524 205 56 66.50 260 170 97.20 Pressure Relief Valves The SA-G Pressure Relief Valve is preferably used as a safety valve to protect central lubrication systems from over pressure. Two port pressure and return, suitable for oil or grease. -20 C to 80 C 0 to 400 bar Figure 1, Female, NPT B7488 1/8 Nylon 20 x 4 5.55 B7488L 1/8 Brass 20 x 4 38.90 AR1473 1/8 Nylon 30 x 4 5.80 Figure 2, Male, NPT 80310 1/8 Nylon 48 x 14 7.30 80311 1/8 Nylon 25Ø 6.75 Figure 3, Male, Metric AR1964 M8 x 1 Nylon 20 x 4 33.40 AR1966 M8 x 1 Nylon 30 x 4 39.10 Figure 3, Male, NPT B7492 1/8 Nylon 25Ø 19.90 AR1531 1/8 Nylon 20 x 4 28.35 AR1584 1/8 Nylon 48 x 14 28.45 AR1586 1/8 Nylon 30 x 4 33.40 90 Elbow Brush Assembly Brush assemblies are suitable for lubricating various moving machine components such as chains, cams, open gears, etc. Oil flow to each brush must be controlled by a meter unit or a control unit. Available with nylon and brass bristles. 68055 2 Port, Pressure & Return, BSPP SA-G 40 A 00 3/8 547.55-30 C to 95 C Figure 1, Female, NPT B7490 1/8 Nylon 13.90