The Global Expert in Solid State Switching Technology

The Global Expert in Solid State Switching Technology

Efficient & Reliable Packaging Solutions Manufacturers in all industry segments such as food and beverage, pharmaceutical, cosmetics, chemicals, etc. are constantly looking to optimize their packaging processes through improving efficiency and reducing costs. These goals are achievable through the implementation of packaging systems that are innovative, fast, reliable and cost effective. Packaging machinery is known for its advanced technology, due to the high level of automation of packaging lines and the intensive use of advanced electronic components. In every case, each component has to meet very strict requirements specific to each industry. Whatever products need to be packaged and whichever the materials used, Crydom Solid State Relays and Contactors are ideal solutions for heating and AC or DC motor control increasing the efficiency of reliability of high performance packaging equipment including Filling & Closing Machinery, Form-Fill-Seal Machinery, Wrapping Machinery, and Palletizing Machinery. Our more than 40 years of experience providing top notch switching solutions and support make Crydom the indisputable global expert in solid state relay technology and preferred choice of companies all over the world. Crydom is a Supplier Member of PMMI, the Association for Packaging and Processing Technologies

Why use Solid State Technology? DEC Long Life Quiet Operation Low Power Consumption No moving parts. Therefore, no mechanical wear and tear on the output contact, ideal for repetitive applications. No acoustical noise when the output contacts change states. Solid State Relays and Contactors require very little input power "coil current" to switch large loads. Minimum Electrical Noise Zero voltage turn-on and zero current turn-off allow for minimum electrical disturbances generated. Shock & Vibration Resistant SSRs are not susceptible to erratic or unreliable operation when operating under tough environments. Ideal for Harsh Environments SSRs do not generate sparks or electric arcs and do not bounce either electrically or mechanically. Compatibility with Control Systems SSRs can be switched by digital systems such as μc based systems, or driven by limit switches and sensors. Fast Switching Instantaneous turn-on Solid State Relays and Contactors respond to a control signal in less than 100 μs. Position Insensitive Suitable for mounting in either vertical or horizontal position, "dead bug" position or adjacent mounting. Embedded Control Functions Include the forward/reverse and interlock control, reducing overall installed cost of the equipment. Space Saving Compact Package Solid state technology allows smaller constraints compared to electromechanical products. Magnetic Noise Immunity Magnetic fields have little effect on SSRs since they don t use a magnetic coil to switch the load. kg Reduced Weight SSRs are much lighter than equivalent electromechanical versions; up to 70%. Reduced Energy Cost Energy savings are achieved from switching the load off when it is not required; ensuring maximum efficiency.

Filling & Closing Machinery Form-Fill-Seal Machinery Application Products Application Products Filling Machine PLC Signal Interface Vertical Bagger Closing heating resistance control Power vibrator motor control Thermoforming machine Heating resistance control Deep Drawing machine Up/down moulder motor control Sealing machine Cover sheet heating resistance control Up/down cover sheet motor control 13 DIN RAIL MOUNT 1 SeriesOne DR 2 SeriesOne DR TIMER 3-12 Amps 6 Amps 11 mm or 18 mm wide SSRs AC or DC Control Voltage options IP20 housing for greater safety UL 508 overload endurance rated Compact size Solid State Relay Timer (11 mm wide) LED Timer status indicator 8 Industry standard timing functions AC or DC Control Voltage options 3 DRA Series 3-8 Amps Ready-to-use Solid State Relays Slim 10 mm (single channel) & 54 mm (four channel) packages Optional Normally Closed output LED input status indicator 4 CKR Series 10-30 Amps Slim 22.5 mm (wide) package AC or DC Control Voltage options LED input status indicator Enhanced surge current ratings 5 DRA Series Contactors 2.4-4.2 Amps 6 3 Phase Solid State Contactor & Reversing Contactors Built-in interlock circuit Overvoltage protection included CCC Certificated SOLICON DRC Series 4.8-7.6 Amps Up to 5 HP / 3.7 kw Motor Controller ratings 3 Phase Solid State Contactor & Reversing Contactors Built-in interlock circuit Ultra-efficient thermal management Questions? Call or e-mail: Americas Tel.: +1 (877) 502 5500 EMEA Tel.: +44 (0) 1202 606030 Asia Tel.: +86 (0) 21 6065 7725 e-mail: sales@crydom.com e-mail: e-mail: sales-cn@crydom.com

Wrapping Machinery Group Packaging Machinery Application Products Application Products Food-wrapping machine Shape and shrink wrapper Up/down film roller motor control Sealing heating resistance control Up/down cylinders x film stretching Heating resistance control Horizontal ring wrapper Bottle boxing PLUG-IN MOUNT 7 CN Series 8 2 Amps Thin (6.2 mm wide) SSRs Ratings of 2 Amps @ 240 VAC DIN Rail sockets available Zero Voltage or Instantaneous Turn-On output PANEL MOUNT LifePlus ED Series 3-5 Amps Industry standard EMR plug-in package LED input status indicator DIN rail & PCB mountable sockets available AC or DC Control Voltage options 9 EL Series 10 Series 1 5-20 Amps 10-125 Amps Mini-puck Solid State Relay Back-to-back SCR output Quick Connect control & output termination 3.75k VAC optical isolation AC or DC Control Voltage options Ultra-low input current draw Zero Voltage or Instantaneous Turn-On output Optional Normally Closed output 11 CW Series 10-125 Amps 12 Heavy duty SSR up to 660 VAC EMC compliant (LEVEL 3) LED input status indicator IP20 touch safe cover AC, DC or Universal Control Voltage options MC Series (MCBC) 25-90 Amps Microprocessor based burst fire controller Industry standard analog input or potentiometer control LED output status indicator Two time base periods available For more information on solid state packaging solutions visit: www.crydom.com

Palletizing Machinery Others/Accessory Application Products Application Products Wrap-around packer Food package and label inspection Up/down boxes motor control Grouper Up/down pallet motor control Inspection lighting control Material feeder Material feeder motor control Vacuum packaging in medical Vacuum equipment power supply 13 Evolution Duals 14 53 Series 25-50 Amps 25-50 Amps 15 PowerPlus DC Series 16 DP Series 10-100 Amps 20-60 Amps PCB MOUNT Independently controlled dual output SSR Optional IP20 touch safe cover Three Input Connector options LED indicator for each output channel DC Output PWM control up to 1 KHz AC or DC Control Voltage options Optional IP20 touch state cover MOSFET output Motor Contactor & Reversing 7.5 HP / 5.5 kw Motor Controller ratings Built-in interlock circuit EMC compliant (LEVEL 3) DC Output Motor Reversing Contactor Soft Start, Soft Stop & Braking functions Built-in interlock circuit LED for direction identification 17 CX Series 18 5 Amps SIP Solid State Relay Ratings up to 5 Amps @ 660 VAC Back-to-back SCR output AC or DC Control Voltage options PF Series 25 Amps SIP Solid State Relay Ratings up to 25 Amps @ 660 VAC Back-to-back SCR output Zero Voltage or Instantaneous Turn-On output Questions? Call or e-mail: Americas Tel.: +1 (877) 502 5500 EMEA Tel.: +44 (0) 1202 606030 Asia Tel.: +86 (0) 21 6065 7725 e-mail: sales@crydom.com e-mail: e-mail: sales-cn@crydom.com

Accessories Sockets DRS1 DRS4 DRSED PCBSED Solid State Technology for Packaging Although there are literally thousands of individual uses for Solid State Relays and Contactors in packaging machinery and related accessory equipment, most can be grouped in the following categories: Protective Covers KS100 KS101 KS300 ID Marker Strips CNLB CNLN CNL2 This encompasses the largest segment of solid state relay and contactors users in the packaging segment. It includes, but is not limited to: conveyors, feeders, vibrator motors, fans, solenoids, and valve control. Thermal Pads HSP1 HSP5 HSP2 HSP6 HSP3 Hardware Kits HK1 HK2 HK4 HKM1 The benefits of solid state relays in heating applications are well known and particularly in packaging machinery where plastic or film are used. Lug Terminals TRM1 TRM6 TRM3/0 Filters 1F25 3F20 3F20-4 Heat Sinks HS501DR HS301 / HS301DR HS251 HS201 / HS201DR HS172 HS151 / HS151DR HS103 / HS103DR HS101 HS073 HS072 HS053 HS033 HS023 DIN Rail Bracket Includes power supplies, transformers, regulators, converters, signals interface, etc.; as well as any load that is not specifically for heating, lighting or motion control. Typical examples are the use of lamps in inspection machinery which need to be turned on and off quite often, and of infrared lamps for better thermal regulation in Forming machinery.

Custom Sensors & Technologies (CST) is a specialist in designing and manufacturing sensing, control and motion products. Through its brands, BEI Kimco, BEI Sensors, BEI PSSC, Crouzet, Crydom, Kavlico, Newall and Systron Donner Inertial, CST offers customizable, reliable and efficient components for mission-critical systems in Aerospace & Defense, Transportation, Energy & Infrastructure, Medical, Food and Beverage and Building Equipment markets. Crydom, global expert in solid state switching technology, combines technology and innovation to provide customers a wide range of standard Solid State Relays and Contactors, and specializes in custom designed solid state switching solutions for any inductive and resistive load application. Crydom is a brand of CST. www.crydom.com Focused on premium value offers and committed to excellence, CST, with 4.500 employees worldwide and sales of $600M US in 2013, is the dependable and adaptable partner for the most demanding customers. www.cstsensors.com AMERICAS Mexico Sales Support: Tel. : +52 (222) 409 7000 Fax : +52 (222) 409 7810 sales-mx@crydom.com Southern & Central Tel.: +55 (11) 2505 7500 Fax: +55 (11) 2505 7507 United Kingdom Sales Support Tel.: +44 (0) 1202 606030 Fax: +44 (0) 1202 606035 Belgium Tel.: +32 (0) 2 460 4413 Fax: +32 (0) 2 461 2614 Italy Tel.: +39 (0) 2 665 99 260 Fax: +39 (0) 2 665 99 268 Technical Support support-europe@crydom.com France Tel.: +33 (0) 810 123 963 Fax: +33 (0) 810 057 605 Spain Tel.: +34 902 876 217 Fax: +34 902 876 219 Germany Tel.: +49 (0) 180 3000 506 Fax: +49 (0) 180 3205 227 vertrieb@crydom.com Netherlands Tel.: +31 (0) 71 582 0068 Fax: +31 (0) 71 542 1648 South Korea Tel.: +82 2 2629 8312 Fax: +82 2 2629 8310 korea@cstsensors.com India Tel: +91 (80) 4113 2204 /05 Fax: +91 (80) 4113 2206 india@cstsensors.com United States & Canada Sales Support: Tel.: +1 (877) 502 5500 Fax: +1 (619) 210 1590 sales@crydom.com Technical Support: Tel.: +1 (877) 702 7700 support@crydom.com EUROPE, MIDDLE EAST & AFRICA Austria & Switzerland Tel.: +44 (0) 1202 606030 Fax: +44 (0) 1202 606035 vertrieb@crydom.com ASIA PACIFIC China & Hong Kong Sales Support Tel.: +86 (0) 21 6065 7725 Fax: +86 (0) 21 6065 7749 sales-cn@crydom.com Technical Support support-cn@crydom.com 2014 Crydom Inc., All Rights Reserved. Specifications are subject to change without prior notice. Crydom and the Crydom logo are registered trademarks of Crydom Inc. 06/2014 Rev.060614 CAT/CR/PK/EN Distributed by : Middle East, Africa & Other European Countries Tel. : +44 (0) 1202 606030 Fax: +44 (0) 1202 606035 East Asia Pacific Tel.: +886 2 8751 6388 Fax: +886 2 2657 8725 eap@cstsensors.com taiwan@cstsensors.com