Advance Engineering Works. Advance Engineering

Advance Engineering Works Advance Engineering (Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) Welcome into the Advance Group of Company We Provide a complete Solution in Formulation & Granulation Processing equipments along with Bulk Material Handling Systems without zero dusting & zero Manpower with fully Auto facility Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net / export@advanceeng.net / mkt.advanceengineering@gmail.com Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

(Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) Advance Group of Company s Founder is Dilip Singh under guidelines will achieve all our Banch Mark quality focus taking under C.E.O. (Chief Executive Officer) - Mr. Rahul Singh Greeting from the Advance Group of Company... We are based at Ahmedabad Gujarat, India. We introduce to our self as an Advance Group of Company the company with 4 years experience in Formulation & Granulation Processing Machinery & Vacuum Powder Transfer System for material Handling Systems. We are the one of fastest growing & exporting our Top Quality Machinery s. Our Company specializes in Quality Machinery with reasonable cost, as well as provides the complete validation documentation according to WHO & USFDA Approved Term Conditions. Our formulation & granalation Machinery s, are Roll Compactor, Rotary Tablet Compression Machine, Fluid Bed Dryer, Rapid Mixer Granulator, Mass Mixe, Octa / Double / V Shape Blander Machine, Multi-Mill, Vibro Shifter, Oscillating Granulator & many more. Even we have directly on one to one replacement of change parts or spares. We are manufacturing the bulk material handaling systems with Advance - PTS this is specially applicable for Pharmaceuticals, Fertilizer, Chemical Bulk Drugs Organic & Food Industries with our Advance - PTS we handling the powder on complete close conditions with Zero Manpower & Zero Dusting. Advance - PTS transfer the material 1 meter to 30 meter distance. Our this specialty will charging FBD, RMG, All Blander, Rotary Tablet Press, Shifter, Multi - Mill Storage Tank, Reactor, Silo Tank, IPC Bin, Jumbo Bag, Our Advance - PTS has transfer rate 20 kg. To 10000 kg. per hour. There is a professional team of engineers and designers professionals working within our company. For reference, we submit our complete range of Machinery & Systems. Advance Group of Company has provide a complete Formulation & Granulation Processing Line in Pharmaceuticals WHO / USFDA approved plan. As well as provider solution in API, Chemical, Organic, Fertilizer, Food Industries Processing Equipments along with material handling systems Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

Code Output Roller Size Roller Material Used Optional Roller All Machine Contact Part material Used Non-Contact Part material Used Roller surface Optional Roller Available Roller Spedd (Step Pulley drive) Feeder Screw Speed Roller Motor Feeder Screw Drive Motor Gear Box Make Gear Box Teeth-Gear Process Overall Dimentions (in mm) Machine Weight Advance - Compactor for formulation Process Why the Compaction most important stage in Granulation Processing Section. Whenever, we make the dry formulation converted in to the Tablet, The formulation of product is must require the product Bulk Density is 0.7 gm/cc Bulk Density. So in that time Advance - Compactor has to use increase the powder Bulk density between compactor s Roller. Advance - Compactor mainly work is increasing the product bulk density, which is most important to make the Tablet or bulk drugs section. Advance - Compactor & Online Roll Compactor, Graduator with Vibro Shifter Facility Code Output Roller Size Roller Material Used Roller Plating Type Optional Roller All Machine Contact Part material Used Non-Contact Part material Used Roller surface Optional Roller Available Roller Spedd (Step Pulley drive) Optional Required Variable Speed Feeder Screw Speed (Through AC VFD) Roller Motor Feeder Screw Drive Motor Gear Box Make Gear Box Teeth-Gear Process Overall Dimentions (in mm) Net Weight AE - PRC - 50 25 to 50 Kg. / Hr.* 200 mm x 50 mm Width 200 mm x 75 mm Width 200 mm x 100 mm Width SS-410 / O.H.N.S. (Applicable in Pharma) Electro Less Nickel Plating (E.I.N.P.) Stainless Steel - 316.(220 Grit Mirror Finish) Stainless Steel - 316.(220 Grit Mirror Finish) Stainless Steel - 304.(240 Grit Matt Finish) Corrugated Type (Specific) Plain / Knurling / Briquetted. (S.S. - 316 / S.S. - 410 / OHNS As per Requirement) 5 to 25 RPM Main Motor Spee Variation through AC - Variable Frequency Drive Unit (1 to 25 RPM) 10 to 110 RPM 1170 (W) X 1180 (L) X 2052 (H) 1100 kg. (Approx) Advance - Compactor Commercial Scale Machine AE - CRC - 150 AE - CRC - 200 50 to 200 Kg. / Hr.* 100 to 250 Kg. / Hr.* 200 mm x 150 mm Width 200 mm x 200 mm Width SS-410 / O.H.N.S. / EN - 31, Hardening & Chrome Process (Applicable in Pharma) Stainless Steel - 316. Stainless Steel - 316. Stainless Steel - 304 (Matt Finish) Plain Type (Simple) Corrugated / Knurling / Briquetted. (S.S. - 304 / S.S. - 410 / OHNS As per Requirement) 5 to 25 RPM 10 to 110 RPM 10.0 HP / 960 RPM / 3 Phase / 415 V / 50 Hz. 5.0 HP / 1440 RPM / 3 Phase / 415 V / 50 Hz. In-House Production Alloy Steel (EN-31 / E-8) 1500 (W) X 1480 (L) X 2552 (H) 1500 kg. (Approx) Advance - Compactor Pilot Scale Machine AE - PRC - 75 25 to 80 Kg. / Hr.* 5.0 HP / 960 RPM / 3 Ph. / 415 V / 50 Hz. 2.0 HP / 1440 RPM / 3 Ph. / 415 V / 50 Hz. In-House Production Alloy Steel (EN-31 / E-8) 1500 (W) X 1480 (L) X 2570 (H) 1600 kg. (Approx) AE - PRC - 100 25 to 100 Kg. / Hr.* 7.5 H.P./960/415 3.0 H.P./14LE 1175 (W) X 1180 (L) X 2052 (H) 1130 Kg. (Approx) Advance Group of Company s Valuable Client List Lubok Industries LLP Osho Recyling (Export) MOHAK Mohak Laboratories (Export)

Advance Group of Company s also supplied the One To One Replacement of Roll Compactor machine change parts or Spares. Knurling Rollers Briquetted Type Rollers Corrugated Type Rollers Roll Compactor Gear Box Change Parts Part No. AE-PRC-2520036 AE-PRC-2520037 AE-PRC-2520038 AE-PRC-6710002 AE-PRC-6710003 AE-PRC-6710004 AE-PRC-2520061 AE-PRC-2520062 AE-PRC-6710005 AE-PRC-6710006 AE-PRC-6710007 AE-PRC-6710008 AE-PRC-6710009 AE-PRC-6710010 AE-PRC-6710050 AE-PRC-6710026 AE-PRC-6710027 AE-PRC-6710028 AE-PRC-6710029 All Roll Compactor 50 / 75 / 100 Chage Parts Gear Box Body End Cover Close End Cover 61 mm Hole Drive Shaft For Gear Box Mid Shaft For Gear Box Driven Shaft For Gear Box 32 Teeth Gear L H 32 Teeth Gear R H 65 Teeth Gear 68 Teeth Gear 57 Teeth Gear 25 Teeth Gear 17 Teeth Gear 28 Teeth Gear Top Cover For Gear Box Coupling Male - Female Driven Pulley 245 X 325 mm At Gear Box Driven Pulley 140 X 155 mm At Gear Box Waser At Pully Quantity 1 SET 3 NO 3 NO Part No. AE-CRC-3520036 AE-CRC-3520037 AE-CRC-3520037 AE-CRC-3520038 AE-CRC-7710002 AE-CRC-7710003 AE-CRC-7710004 AE-CRC-3520061 AE-CRC-3520062 AE-CRC-7710005 AE-CRC-7710006 AE-CRC-7710008 AE-CRC-7710009 AE-CRC-7710010 AE-CRC-4520061 AE-CRC-4520061 AE-CRC-5520062 AE-CRC-5520063 AE-CRC-5520064 AE-CRC-5520065 Roll Compactor CRC - 150 / 200 Change Parts Gear Box A Body (TOP - Bottom) Gear Box B Body (TOP - Bottom) End Cover Close - Gear Box A End Cover 61 mm Hole. - Gear Box B Drive Shaft For Gear Box - A Mid Shaft For Gear Box - A Drive Shaft For Gear Box - A Drive Shaft For Gear Box - B Mid Shaft For Gear Box - B 48 Teeth Gear 42 Teeth Gear 32 Teeth Gear 14 Teeth Gear 18 Teeth Gear Roller Main Shaft For L.H. Roller Main Shaft For R.H. Check & Nut & Washer Roller Main Shaft For R.H. Check & Nut & Washer Roller Main Shaft For R.H. Scrapper for Roller for L.H. & R.H. Teflon for Side Wall & Chamber Quantity 1 SET 1 SET 3 NO 3 NO (Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

Advance - Lab Multi Mill Multi-Mill Screen / Sieves Tableting De-Dusting & Deburring Machine Vibro Type Cone-Mill Screen / Sieves Advance Machine Code Advance Machine Code Contact Part Non Contact Part Capacity/Hour* Minimum Diameter of Tablet Minimum Diameter of Tablet Advance - Dust Collector Machine Advance - Dust Extractor-150 / 300 CFM Advance - Multi Mill ADVANCE - De - Dusting & De-Burring Machine AE-TDDB-Vibro AE-TDDB-Vibro with Brushing Unit Stainless Steel - 316 Stainless Steel - 304 Up to 2,00,000 Tablet / Hr. 5 mm 25 mm Advance - Plug & Play Machinery Output* Contact Parts Contact Parts Rotor Assembly Diameter Rotor Speed Screen dimention Motor Starter Variable Speed (Optional) Material Charging Height Material Discharging Height Advance - Tablet De-Dusting Machine Note : (If require 26 MM to 40 MM Tablet Diameter, then above Out-Put capacity will be fluction.) Electric Motor 0.25 H.P. / 1440 RPM / 415 Volt / 3 Phase / 50 Hz. Power Supply. (Client Scope) 3 - Phase / 50 Hz. / 415 Volt. Cable Size : 1.5 MM / 4 Cores. Machine Dimension (Approx) 450 (L) x 450 (W) x 800 (H) Machine Weight Approx 70 Kg. Machine Code Contact Par Non Contact Part Filter Area Filter Capacity / Hour* Suction Capacity Electric Motor Nozzle Bass Arrangement Filter Provision (Optional) Approx Weight Advance - Milling Machine AE - LMM - 150 AE - LMM - 250 5 to 50 Kg./Hr. 50 to 300 Kg./Hr. Stainless Steel - 304 Stainless Steel - 304. (Optional - Mild Steel - Color Coated) 150 mm. Approx. 250 mm. Approx. 750 / 1500 / 2300 / 3000 RPM 750 / 1500 / 2300 / 3000 RPM 6 Nos. With knife and impact edges and 2 12 Nos. With knife and impact edges and 2 Nos. Scraper blades Nos. Scraper blades Inner Diameter 165 mm. / Height 90 mm Inner Diameter 265 mm. / Height 140 mm 1.5 H.P. / 2880 RPM / 415 Volt / 3 - Phase 3 H.P. / 2880 RPM / 415 Volt / 3 - Phase DOL with Reversible switch DOL with Reversible switch 1.5 or 3.0 H.P. AC - VFD with POT Meter, START / STOP Push Button, Emergency Switch. Advance Machine Code Advance Machine Code Advance Machine Code Advance Machine Code Contact Part Non Contact Part Capacity/Hour* Minimum Diameter of Tablet Maximum Diameter of Tablet 1060 + 5 mm. 560 + 5 mm. ADVANCE - De - Dusting & De-Burring Machine AE-ETDD-6 AE-ETDD-9 AE-ETDD-12 AE-ETDD-15 Stainless Steel - 316 Stainless Steel - 304 Up to 2,50,000 Tablet / Hr. 5 mm 16 mm Note : (If require 18 MM to 25 MM Tablet Diameter, then above Out-put Capacity will be fluctuation) Electric Motor 0.25 H.P. / 1440 RPM / 415 Volt / 3 Phase / 50 Hz. Power Supply. (Client Scope) 3 - Phase / 50 Hz. /415 Volt. Cable Size : 15 MM / 4 Cores. 560 (L) X 450 (W) X 850 (H) (For 6 Tray) Machine Dimension (Approx) 560 (L) X 450 (W) X 1150 (H) (For 9 Tray) 560 (L) X 450 (W) X 1450 (H) (For 12 Tray) 560 (L) X 450 (W) X 1750 (H) (For 15 Tray) Machine Weight Approx 90 kg. To 120 kg. Advance Group of Company s Valuable Client List Sintex Industries Limited Kunal Industries Pvt. Ltd. Beaters Advance - Dust Extractor All s AE - DE - 150 AE - DE - 300 AE - DE - 500 AE - DE - 500 Stainless Steel - 316. (Mirror Finish) Stainless Steel - 304. (Matt Finish) 1.343 Sq. Mtr. 2.103 Sq. Mtr. 3.950 Sq. Mtr. 5.250 Sq. Mtr. 4 No. Of Filter Bag. (Cotton) 10 to 15 Liters 10 to 15 Liters 25 to 30 Liters 150 CFM 150 CFM 500 CFM 1.0 HP / 2880 RPM / 415 V 1.0 HP / 2880 RPM / 415 V 2.0 HP / 2880 RPM / 415 V 2 No. Of Dust Nozzle. 4 No. Of Dust Nozzle. 30 to 35 Liters 700 CFM 3.0 HP / 2880 RPM / 415 V 4 No. Of Castor wheels with Locking Facility. 0.3 Micro Hepa Filter in built in Dust Extractor Machine for Air Purifications. Hepa Filter Size : 300 X 300 X 200-1 No. 5.0 Micron Pre Filter - 1 No. 10.0 Micron Fine Filter - 1 No. All M.O.C.-S.S.-304 45 Kg. (Approx) 90 Kg. (Approx) 130 Kg. (Approx) 190 Kg. (Approx) 1460 + 5 mm. 760 + 5 mm. Elevating De-Dusting Tableting Machine Advance - Dust Extractor-500 / 700 CFM - HEPA Filtration

Advance - Plug & Play Machinery To Define granules Size require Ribro Shifter Machine, Advance - Sieving / Screening Machine Z Type Screen Advance - Sieve Shaker Advance - Vibro Shifter Advance - Vacuum Rated Vibro Shifter Machine cgmp MODEL Machine Contact Part Machine Contact Non Part Screens / Sleve Make Screen Dia. Capacity / Hour* Top Lid Charging Height Disharging Height Electric Motor Oscillating Granulator Double Side Granulator Machine Sleve Shekar - 8 Vibro Shifter 12 Vibro Shifter 18 Vibro Shifter 22 Vibro Shifter 24 Description Code AE - LSS - 8 AE - VS - 12 AE - VS - 18 AE - VS - 22 AE - VS - 24 Contact Part Non Contact Part Stainless Steel - 316. (220 Gritt Mirror Finish) Screens Stainless Steel - 304. (220 Gritt Mirror Finish) Screen Dia. Stainless Steel - 316 with Silicon Molded Gasket / white Neoprene Rubber Gasket 200 MM DIA 300 MM DIA 450 MM DIA 550 MM DIA 610 MM DIA Screen Gasket Capacity / Hour* 5 to 10 Kg. 5 to 20 Kg./Hr. 5 to 25 Kg./Hr. 10 to 25 Kg./Hr. 10 to 100 Kg./Hr. Charging height Stainless Steel - 316 with Silicon Gasket White Neoprene Rubber Gasket Mini. 2 Deck. Maxi 7 Deck Manually 290 + 5 mm. 150 + 5 mm. 400 + 5 mm. 290 + 5 mm. 500 + 5 mm. 300 + 5 mm. 600 + 5 mm. 320 + 5 mm. 0.25 H.P. / 1-Phase-230 Volt. 0.5 H.P. / 1440 RPM / 3 Phase / 415 Volt Single Side Granulator Machine Granulator Screen / Sieves Machine Code Screen Size *Output All Non Contact Parts Stirrer Oscillation Assembly Stirrer RPM Charging Height Discharging Height Power Total (H.P.) Gear Box Base Arrangement Screen Particle Size Disharging Height Electric Motor Operating System Base Arrangement Utility Required. Advance - Granulator / Crushing Machine Advance - Oscillating Granulator Machine Advance - Single Side Granulator Machine Advance - Double Side Granulator Machine AE - OG - 200 510 X 250 mm Width. 25 to 40 Kg./Hr. 200 mm x 410 mm Ratchet 115 per minute. 550 mm (Variable according to application) 350 mm 2 H.P. / 1440 RPM / 415 V / 50 Hz. 3 / 10:1 Ratio Advance - Heavy Scale Vibro Shifter AE - SSG - 300 780 X 340 mm Width. 25 to 40 Kg./Hr. 3 to 100 Stainless Steel - 316. Stainless Steel - 304. 220 x 310 mm Long - 01 Nos. 215 per minute. 750 mm (Variable according to application) 550 mm 2 H.P. / 1440 RPM / 415 V / 50 Hz. (1 No.) 3 / 10:1 Ratio - 01 Nos. 4 No. Of Castor Wheel with locking facility Sieves - Screen with Silicon Moulded Advance - Vibro Shifter Machine / Advance - Vaccum Rated Vibro Shifter Machine AE - VS - 30 AE - VS - 36 AE - VS - 48 AE - VS - 60 AE - VS - 72 Stainless Steel - 304 / (Optional) Stainless Steel - 316. (220 Grit Mirror Finish) Mid Steel - M.S. (Powder Coated) / (Optional) Stainless Steel - 304. (220 Grit Matt Finish) Mild Steel M.S. (Powder Coated) / (Optional) Stainless Steel 304. (220 Grit Matt Finish) 750 MM 910 MM 1220 MM 1524 MM 1828 MM Available in Wiremess or Perforated Screen. In Stainless Steel 304 / Optional Stainless Steel 316 / 316 L Particle size: 6 / 12 / 14 / 18 / 20 / 24 / 30 / 40 / 60 / 80 / 100 / 120 / 150 / 200 / 220 / 240 / 300 / 400 / 450 / 500 / 600 Mess. Neoprene / Natural White Rubber Gasket / Silicon Food Graded Rubber Gasket. 40 to 300 Kg. / Hr. 50 to 350 Kg. / Hr. 80 to 500 Kg. / Hr. 100 to 800 Kg. / Hr. 200 to 1400 Kg. / Hr. 900 + 5 mm without Lid 900 + 5 mm without Lid 1000 + 5 mm without Lid 1200 + 5 mm without Lid 1250 + 5 mm without Lid 1220 + 5 mm with Lid 1220 + 5 mm with Lid 1320 + 5 mm with Lid 1420 + 5 mm with Lid 1450 + 5 mm with Lid 735 + 5 mm 735 + 5 mm 750 + 5 mm 700 + 5 mm 800 + 5 mm 1.0 HP / 1440 RPM / 3 Ph. 2.0 HP / 1440 RPM / 3 Ph. 3.0 HP / 1440 RPM / 3 Ph. 5.0 HP / 1440 RPM / 3 Ph. 7.5 HP / 1440 RPM / 3 Ph. Direct On Load (DOL) Starter Switch 3 No. Of Castor Wheel with Locking Arrangement Anti Vibration Pad. 4 No. Plug & Play Machine AE - DSG - 300 950 X 307 mm Width. 50 to 400 Kg./Hr. 220 x 310 mm Long - 02 Nos. 355 per minute. 1150 mm 750 mm 2 H.P. / 1440 RPM / 415 V / 50 Hz. (2 No.) 2 / 10:1 Ratio - (2 Nos.) (Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

Advance - R & D Lab Scale Blender Dry Formulation / Food Product / Bulk Drugs Mixing with Blender Advance - Pilot & Commerciel Blender Octagonal Blender Double Cone V Shape Blender Blender Shape Octagonal Blander Double Cone Blander V-Blander Gross Volume Working Volume Contact Parts Non Contact Parts Main Motor Gear Box RPM of Blender RPM Variable Material Inlet Internal Baffles Discharge Valve Size & Type Gasket Control & Operating Panel (Optional) Automation AE-OGB-10 Liters. AE-DCB-10 Liters. AE-VB-10 Liters. 10 Liters. 7 Liters. Advance - Blender Machine s Name AE-OGB-20 Liters. AE-DCB-20 Liters. AE-VB-20 Liters. 25 Liters. 20 Liters. AE-OGB-30 Liters. AE-DCB-30 Liters. AE-VB-30 Liters. 35 Liters. 30 Liters. S.S.316 / 316 L (M.O.C.) S.S.D04 / S.S.304 Cladding (M.O.C.) 01. HP / 1440 RPM / 415V / 3 - Phase Size - 3 15 RPM (Fix) 1 to 15 RPM through Variable Frequency Drive. (3-Phase - 415 V / 50 Hz.) 150 MM DIA of TOP Cover with Trl Clover Clamp. - Stainless Steel - 316 / 316 L. Not Provide in R & D Scale 200 MM Die meter Butterfly valve Manually Operated Hand Valve. White Neoprene Rubber Food Graded Gasket. (Optional Part : White food Grade silicon Gasket at Extra Cost) Manually Operated through Push Button. (Start / Stop & Emergency). DOL Starter Switch. RPM Variable through AC - VFD. Programmable Logic Control Allen Bradley. HMI / MMI Make - KEP. Railing Interlock / Limit Switch / Recipe Edit / Save / Pass Word Protection / Reveres - Forward etc. Advance - Comminuting Mill Machine Communiting Mill Screen / Sieves Blender Shape Octagonal Blander Double Cone Blander V-Blander Gross Volume Working Volume Contact Parts Non Contact Parts Main Motor Gear Box RPM of Blender Material Inlet Internal Baffles Discharge Valve Size & Type Gasket Control & Operating Panel (Optional) Automation Rotor Speed Blades Output* Screens Electrical Motor Dimensions Case Dimensions Net Weight Gross Weight Double Cone Octagonal Blender V Shape Blender Also available in capacity of 200/300/800/2000/2500 liters AE-OGB-100 Liters. AE-DCB-100 Liters. AE-VB-100 Liters. 100 Liters. 70 Liters. (60 Kg.) Advance - Octagonal / Double Cone / V - Shape Blender Machine AE-OGB-500 Liters. AE-OGB-1200 Liters. AE-DCB-500 Liters. AE-DCB-1200 Liters. AE-VB-500 Liters. AE-VB-1200 Liters. 500 Liters. 1200 Liters. 400 Liters. (300 Kg.) 1000 Liters. (600 Kg.) AE-OGB-1500 Liters. AE-DCB-1500 Liters. AE-VB-1500 Liters. 1500 Liters. 1200 Liters. (800 Kg.) S.S.316 / 316 L (M.O.C.) S.S.D04 / S.S.304 Cladding (M.O.C.) 3 H.P./1440 RPM / 415V/3-Phase 5 H.P./1440 RPM / 415V/3-Phase 7.5 H.P./1440 RPM / 415V/3-Phase Size - 3 Size - 4 Size - 5 15 RPM (Fix) Optional Part : If require Variable Speed : 1 to 15 RPM through Variable Frequency Drive. (3-Phase - 415 V / 50 Hz.) 300 MM DIA of TOP Cover with Trl Clover Clamp. - Stainless Steel - 316 / 316 L. Stainless Steel - 316. Shaft Mounted in Shell, welded 6 No. Of Baffles 250 MM Die meter Butterfly valve Manually Operated Hand Valve. White Neoprene Rubber Food Graded Gasket. (Optional Part : White food Grade silicon Gasket at Extra Cost) Manually Operated through Push Button. (Start / Stop & Emergency). DOL Starter Switch. RPM Variable through AC - VFD. Programmable Logic Control Allen Bradley. HMI / MMI Make - KEP. Railing Interlock / Limit Switch / Recipe Edit / Save / Pass Word Protection / Reveres - Forward etc. AE - CM - 300/Also available in lab scale 1000-2250 - 4500 RPM Fix Beaters (Stainless Steel With Knife And Impact Edge.) 25-300 Kg./Hr. 1. Round / Square Hole Perforated S. S. Sheet 2. Woven S. S. Wire Mesh 5.5 Kw / 7.5 Hp / 1440 Rpm / 3 Ph. 1230 X 760 X 1575 Mm. (Ht) 1380 X 1050 X 1900 Mm (Ht) 400 kgs. 530 kgs. 49 X 30 X 62 Inch. App. 55 X 42 X 75 Inch. Advance Group of Company s Valuable Client List Doshion Water Solution P. Ltd. Ion Exchange India Ltd. Sonekar Pharmacy College Salem Microbes Ltd.

Advance - Rapid Mixer Granultor (RMG) Advance-Mass Mixer Standard Mode GMP Advance-Fluid Bed Dryer GMP Standard (Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) Machine Gross Volume Working Volume All Non Contact Parts Gaskets Main Impeller Motor Chopper Motor Gear Box Control & Operation Optional Operation Pneumatic Parts Compressed Air Power Required Machine Name Code Capacity Over flow capacity Working Capacity All Non Contact Parts Operating Panel Speed of stirrer Internal Finish & Baffles Electric Motor (Warranty) Main Motor Make (M.O.C.) Gear Box Make (M.O.C.) Standard Interlock (Optional) Interlock (Optional) Variable Speed MODEL Capacity Contact Parts Non Contact Parts Gaskets Main Motor Tube for Seal View Glass Heater Arrangement Finger Bag Finger Bag Shaking Control - Operation Optional Operation Pneumatic Parts Compressed Air Advance - Wet Granulation Zone Wet formulation Product Mixing & Drying Machinery Advance Process Wet - Granulation Processing Equipments - Also mfg. In 300/500/900/1200 liters capacity AE - RMG - 10 Liters AE - RMG - 20 Liters AE - RMG - 30 Liters AE - RMG - 50 Liters AE - RMG - 100 Liters AE - RMG - 200 Liters 10 Liters 7 Liters 20 Liters 14 Liters 30 Liters 23 Liters 50 Liters 42 Liters 50 Liters 42 Liters 50 Liters 42 Liters Stainless Steel - 316. / 316.1 SA 270 Grit Mirror Finish. 304 / Mild Steel cladded with SS 304. SA 270 Grit Mirror Finish. Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket. 1.0 H.P. / 2.0 H. P. Dual Speed 2.0 H.P. / 3.0 H. P. Dual Speed 5.0 H.P. / 7.5 H. P. Dual Speed 0.5 2.0 H.P. / 1.0 H.P. 1 H.P. Dual Speed 1 H.P. Dual Speed 2.0 H.P. / 3.0 H. P. Dual Speed Dual Speed Size : 6, Ratio : 10:1 Size : 7, Ratio : 10:1 Size : 8, Ratio : 10:1 Manually Operated Control panel through Push Botton, Timer, Indicator & Selector Switch, Emergency / Discharge / Limit Switch / Pneumatic Programmable Logic Controller / 1200: Allen Bradley, HMI / MMI Make : KEP, Speed variable, Interlock, Alarms, Recipe Edit / Save. Security etc. All Pneumatic Cylinder & Solenold Valve make : Jenatics / Aira / Festo Make. Minimum 4.5 Kg./cm 2 Maximum 8.0 Kg./cm2 Continues Air Pressure required. (Client Scope) 3.0 KW / 415 Volts / 3 - Phase AC / 50 Hz. 5.0 KW / 415 Volts / 3 - Phase AC / 50 Hz. 7.0 KW / 415 Volts / 3 - Phase AC / 50 Hz. Mass Mixer - 25 Kg. Mass Mixer - 50 Kg. Mass Mixer - 100 Kg. Mass Mixer - 150 Kg. Mass Mixer - 200 Kg. AE - MM - 25 20 Kgs. 30 Ltrs. 25 Ltrs. AE - MM - 50 40 Kgs. 60 Ltrs. 50 Ltrs. AE - MM - 100 100 Kgs. 200 Ltrs. 150 Ltrs. AE - MM - 150 150 Kgs. 200 Ltrs. 160 Ltrs. AE - MM - 200 200 Kgs. 250 Ltrs. 200 Ltrs. Stainless Steel - 304 Stainless Steel - 304 claded on M.S. Powder Coated START / STOP DOL Starter 30 RPM 25 RPM 25 RPM Mirror Finish, 6 no. Of Baffles for Proper Mixing 1.0 H.P. / 1440 RPM / 415 Volt 2.0 H.P. / 1440 RPM / 415 Volt 3.0 H.P. / 1440 RPM / 415 V. 5.0 H.P. / 1440 RPM / 415 V. 7.5 H.P. / 1440 RPM / 415 V. CG / BB / Kirlosker / Rotomotive Premium / Elecon / Maruti / Robus. Start & Stop. OLR with Starter. Emergency Stop / Limit Switch. 1 / 2 H.P. AC - VFD with POT Meter, Control Panel & Lamps. 3 / 5 / 7.5 H.P. AC - VFD with POT Meter, Control Panel & Lamps. AE - FBD - 5 Kg. AE - FBD - 10 Kg. AE - FBD - 20 Kg. AE - FBD - 60 Kg. AE - FBD - 200 Kg. 5 kg. 10 kg. 20 kg. 60 kg. 200 kg. Stainless Steel - 316. / 316.1 SA 270 Grit Mirror Finish 304 / Mild Steel claded with SS 304 SA 240 Grit Matt Finish Food Grade Silicon Rubber Gasket / White Neoprene Rubber Gasket 1.0 H.P. / 2.0 H.P. / 2880 RPM / 3-Phase / 415 Volt. 2.0 H.P. / 7.5 H.P. / 2880 RPM/3-Phase/415 Volt. 10.0 H.P. / 20 H.P. / 2880 RPM / 3-Phase / 415 Volt. As per & Bowl Size. Use Inflatable Tube Silicon Gasket with PU connection. / White Neoprene Rubber Gasket Food Graded. 100 MM DIA Toughen Glass. 200 MM DIA Toughen Glass. Steam Heater / Electric Heating in Both Operations. 3 Micron size of Finger Bag as per FBD s. (Imported Cotton) In All s Finger Bag Up / Down through Pneumatic Cylinder, Shaking in Auto / Timer Based. Manually Operated Control panel through Push Button, Timer, Indicators & Selector Switch, Emergency / Discharge / Limit Switch / Pneumatic. Programmable Logic Controller / 1200: Allen Bradley. Hm1 / Mm1 Make : KEP. Speed variable, Interlock, Alarms, Recipe Edit / Save. Security etc. All Pneumatic Cylinder & Solenold Valve make : Jenatics / Aira / Festo Make. 2 2 Minimum 4.5 Kg/cm Maximum 8.0 Kg./cm Continues Air Pressure required. (Client Scope) Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

Advance - Lab Press & Mini Press Tablet Compression Machine Advance R & D Tablet Press Advance - Rotary Tablet Compression Machine are, AE - Mini Press - 8 - D AE - Mini Press - 10 - B AE - Multi Tooling - 12 - D / B / BB AE - Bolus Machine - 12 AE - SRTC - 16 AE - SRTC - 20 AE - DRTC - 27 D. AE - DRTC - 35 B. AE - DRTC - 45 BB. AE - HRTC - 45 BB. AE - HRTC - 51 BB. AE - HRTC - 61 BB. Advance - Heavy Duty Tablet Compression Machine No. Of Station Type of Tooling Output Tablets / Hour Maximum Operating Pressure Maximum Operating Pre-Comp. Pressure Maximum Tablet Diameter Maximum Depth of Fill Applicable only for Multi - Tooling D / B / BB Lab Press Machine Upper Punch Penetration Power Overall Dimensions (In mm) Net Weight Advance - Rotary Tablet compression Machin change or Spare parts, Die & Puches, directly one to one replacement Rotary Tablet Machine Change / Spare Parts AE - Mini Press - B - D AE - Lab Press - 10 -B AE - Multi - Tooling - 12 8 D 4800 To 14000 D / B / BB 12 Stn. 2000 To 72000 10 B 6000 To 18000 6 Ton 1 Ton 19 mm 16 mm 20.5 mm 17.5 mm Maximum Tablet Diameter for D Tooling Maximum Tablet Diameter for B Tooling Maximum Tablet Diameter for BB Tooling Maximum Depth of Fill D Tooling Maximum Depth of Fill B Tooling 25.0 mm 16.0 mm 11.11 mm 20.5 mm 17.5 mm 17.5 mm Maximum Depth of Fill BB Tooling 2 to 6 mm 2 H.P. / 3 - Phase / 1440 RPM / 50 Hz. 810 X 650 X 1190 H 380 Kg. 385 Kg. 400 Kg. Advance - Double Side Rotary Tablet Compression Machine Tooling No. Of Station Hopper & Discharge Chute Non Contact Parts Operatif Force Max.Tablet Diameter Max. Depth of fill Output Tab./Hour Electric Motor Overall Dimensions (in mm) Net Weight No. Of Station Type of Tooling Discharge Chute & Hopper Turret & Die Plate *Output Tablets / Hr. Minimum Maximum Max. Operating Pressure Max.Tablet Diameter Max. Depth of fill Upper Punch Penetration Main Electric Motor Overall Dimensions (in cm) Net Weight Case Dimensions (in cm) Gross Weight AE - Bolus - 12 AE - SRTC - 16 AE - SRTC - 20 Bolus Machine. 12 Stn. D 16 Stn. D 20 Stn. Stainless Steel - 316. Stainless Steel - 304. Some Parts E.I.N.P. & Nickel Chroming 12 to 14 Ton. 40 MM 30 MM 2000 TO 14000 Tablets/Hr. 5 H.P. / 960 RPM / 415 V. 980 X 1020 X 1820 (H) 1050 Kg. 10 Ton. 23 MM 20 MM 17,000 to 50,000 Tablet/Hr. 3 HP / 960 RPM / 415 V. 975 X 1050 X 1820 (H) 1050 Kg. 2 HP / 960 RPM / 415 V. 975 X 1050 X 1820 (H) 1100 Kg. AE - DRTC - 27 AE - DRTC - 35 AE - DRTC - 45 27 D 35 B 45 BB Stainless Steel - 316. 220 Grit Mirror Finish SG Iron 400 / 12. Chrome or (E.L.N.P.) Electro less Nickle Plating. (Optional SS-316) 40000 125000 10 Tones 23 MM 20 MM 3.70 K.W./5 H.P. 109 x 109 x 182H 1100 kg. 55000 155000 16 MM 17.5 MM 1.5 to 8 mm 109 x 109 x 182H 1100 kg. 131x137x204 H 6.5 Tons 70000 210000 11.11 MM 17.5 MM 109 x 109 x 182H 1200 kg. 1300 kg. 1350 kg. 1400 kg. Advance Group of Company s Valuable Client List Polyplex Limited Vigroa Medicare Ltd. Meghmani Orgenic Ltd.

For Coating on Tablet, Capsule, Chocolate have manufacturing Advance - Coating Pan Machine in GMP WHO / USFDA Advance - Multi Purpose R & D Lab Scale Advance - Universal Gear - Fix Manually Spray Gun Planetery Mixer Advance - Coating Pan Machine Code Size Loading Capacity in liters Machine s Contact Part Machine s Non-Contact Part Motor H.P. Blower H.P. Blower Arrangement Heater Capacity in Kw. Pan (Bowl) RPM of Pan Optioal (Speed Variable) Pan Mounting Angle Optional (Spraying System) Horizontal Technical Specifications PAN - Bowl in S.S. - 304/ 316 AE - CP - 12 AE - CP - 18 AE - CP - 24 AE - CP - 30 AE - CP - 36 AE - CP - 42 AE - CP - 48 AE - CP - 60 12 20 Liters 18 30 Liters 24 45 Liters 30 60 Liters 36 75 Liters 42 100 Liters 48 150 Liters 60 210 Liters Stainless Steel - 304 (Optional Part - Stainless Steel - 316 / 316L) Mid Steel (M.S.) With Powder Coated (Optional Part - Stainless Steel - 304) 0.5 H.P. /1440 RPM / 415 Volt. 2.0 H.P. /1440 RPM / 415 Volt. 3.0 H.P. /1440 RPM / 415 V. 5.0 H.P. /1440 RPM / 415 V. 1.5 H.P. /1440 RPM / 415 V. 3.0 H.P. /1440 RPM / 415 V. 5.0 H.P. /1440 RPM / 415 V. 7.5 H.P. /1440 RPM / 415 V. Provide with Machine at extra cost. (Optional Part - Stainless Steel - 304) 1.0 K.W. (Electric) 2.0 K.W. (Electric) 3.0 K.W. (Electric) 5.0 K.W. (Electric) 1.5 MM Thickness with 4 No. Of Baffles 2.0 MM Thickness with 5 No. Of Baffles 10 to 60 (Direct couple with Gear Box & Motor) 10 to 35 (Direct couple with Gear Box & Motor) 0.5 H.P. / AC-VFD S.S. Panel Box, Pot Meter Standard Pus Buttons Advance - Colloid Mill Machine (Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) R & D / Pilot Scale Coating Pan Vertical 2.0 H.P. / AC-VFD S.S. Panel Box, 3.0 H.P. / AC-VFD S.S. Panel Box, Pot Meter Standard Pus Buttons Pot Meter Standard Pus Buttons 0 30 Spray Gun - S.S. 304 (Manually) Code Outpupt Capacity Particle size reduction Hopper Capacity Optional Parts All Non-Contact Parts Operating System Motor Height 5.0 H.P. / AC-VFD S.S. Panel Box, Pot Meter Standard Pus Buttons Technical Specifications V - Blender - Dry Mixing Coating Pan - Capsule or Tablet Coating Advance - Pelletizer AE - Lab - VCM (Vertical) AE - Lab - HCM (Horizontal) AE - VCM (Vertical) AE - HCM (Horizontal) 100 to 5000 Kg. / Shift 100 to 12000 Kg. / Shift 5 to 15 Microns Approx : 5 to 10 Liters Approx : 20 to 30 Liters Water Jacketing System Stainless Steel - 316 (Mirror Finish) Stainless Steel - 304 (Cladding or Guards) Direct On Load Starter Switch 1 H.P. / 2900 RPM / 3- Phase / 415 Volt 3 H.P. / 2900 RPM / 3- Phase / 415 Volt 650 mm. 950 mm. Dry Granulator for Crushing Lumps Advance - Ribbon Mixer Attachment Main Drive Universal Gear V-Shape Blender Planetary Mixer Pelletizer Dry Granulator Coating Hom Orgenizer Advance - Horizontal Main Drive Unit Homogeniser Liquid Particle Define Advance - Multi Purpose R & D Equipment Purpose Horizontal Mode Mandatory Dry Powder Mixing Liquid Mixer Mixing Granules / Particle Tablet Coating Liquid Section Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

Applicable Industry for our Advance - PTS Pharmaceuticals, API, Bulk Drugs, Minerals, Food, Salt, Organic, Resin, Polymer, Fertilizer & Agriculture. Manufacturing in GMP, cgmp & Standard. Product Contact Parts : Product Non-Contact Parts : Lab Scale : Transfer Rate : 100 To 150kg./Hr. Pilot Scale : Transfer Rate : 200 To 300kg./Hr. Commercial Scale : Transfer Rate : 300 To 400kg./Hr. Commercial Scale : Transfer Rate : 500 To 800 Kg./ Hr. Heavy Commercial Scale : Transfer Rate : 600 To 1000kg./Hr. (A) Rotary Tablet Compression Charging System. (B) Roll Compactor Charging System. (C) Fluid Bed Dryer Unloading System. (D) Rapid Mixer Granulator Charging System. Stainless Steel 316 L / 316 (Optional) Stainless Steel 304 / Mild Steel (M.S.) Powder Coated. Heavy Commercial Scale : Transfer Rate : 1500 To 2000kg./Hr. Heavy Commercial Scale : Transfer Rate : 2500 To 3500kg./Hr. Bulk material Heavy Scale : Transfer Rate : 4000 To 6000 Kg./Hr. High scale Transfer Loading : Transfer Rate : 7000 To 8000 kg./hr. High scale Transfer Loading : Transfer Rate : 9000 To 10000 kg./hr. Advance Powder Transfer System Bin / Drum / Storage tank Pick-Up through Bottom Pick-Up Device or Wand. Below is our some of application we charge through our Advance Powder Transfer Systems. (E) Blander Charging System. (F) Multi- Mill / Cone Mill Inline Charging System. (G) IPC Bin Loading Unloading System. (H) Vibro Shifter Charging System. (I) Sachet Jaar Filling System. (J) Jumbo Bag Loading Unloading System. (K) Storage Tank Charging System. (L) Reactor Tank Charging System. (M) Liquid Charging System. (N) Bag Dump without Dusting Charging System. (O) Multi-Location Charging System. (P) & Many More. IPC Bin Storage Tank Milling Dry Vacuum Pump of Service Area Advance BPD Advance - PTS Dust Collection Drying IPC Bin Blending Mixing Milling Shifter Sieving / Screening Advance BPD Advance - PTS Dust Collection (Occasionally) Application should be change as per clients' requirement. (Need to Product or Material in Powder Form, Material Bulk Density should be Minimum in 0.3 g/ml.) Advance Group of Company s Valuable Client List Inbisco India Ltd. Gracure Pharma Ltd. Verve Human Health Care Ltd. Anuradha College of Pharmacy

Online Vibro Shifter with Blender Charging Facility Dry Vaccum Pump Online Multi / Cone / Comm. - Mill with Blender Charging Facility Dryer Vaccum Rated Blender Machine Octagonal Blender Vibro Shifter Flexible Hose Pipe Receiver Flexible Hose Pipe Inline Cone Mill IPC Bin / FBD Bowl Advance BPD Advance Dust Collection Advance Dust Collection Area to be Used Output Receiver Size Working Strategy Construction of PTS Receiver & Trolly Length Vacuum Intel Size Material Intel Size Vacuum Pump with Motor Primary Filter Secondary Filter in Vacuum Pump Filter Clean Assembly Hose Pipe Control Panel (Operating Panel) Pneumatics Item (Solenoid Valve) Solenoid Valve Compressed Air Require (Client Scope) Power Supply (Client Scope) AE - PTS - 4 x 22 Size (Dust Collection ) Ground Floor 500 to 300 Kg./Hr. Contact Part SS - 316 4 x 22 (Inch) SS - 316 Need to Vacuum Rated Equipments AE - PTS Receiver - 3.0 MM Thick sheet Total Size approx : 800 MM 2 (Inch) Outer Dia. With Tri Clover Clamp 2 (Inch) Outer Dia. With Tri Clover Clamp 7.5 H.P. / 2880 RPM / 3 - Phase / 415 Volt / 50 Hz. 3.0 Micron (Anti - Static material) Imported Coated 3.0 Micron SS-316, Air Condenser with Pressure Regulator 2.5 Flexible Food Graded Anti-Static with Hose Clip. S.S. - 304 with Timer & START / STOP, Main Switch Standard Make Purging System. Aira Make - 230 V Minimum 4.0 Kg. & Maximum 8 Kg. 3 - Phase / 415 Volt / 50 Hz. Output Receiver Size Receiver Strong Capacity Construction of PTS Receiver Fitting Arrangement Receiver Size along with Vacuum Intel Size Material Intel Size Main Motor Vacuum Pump Primary Filter Primary Filter Fitting Arrangement Butterfly Valve (Pneumatic Operated) Secondary Filter in Vacuum Pump Filter Clean Assembly Hose Pipe Control Panel (Operating Panel) Pneumatics Item (Solenoid Valve) Solenoid Valve Compressed Air Require (Client Scope) Power Supply (Client Scope) AE - PTS - 16 x 8 Size 1500 to 2000 Kg./Hr. Contact Part Stainless Steel - 304 / 316 16 x 8 (In Inch) At 1 Time Storage capacity - 20 Kg. S.S. - 304 / 316. Top Cover with Silicon Rubber Gasket Total Size approx : 800 MM 2.0 (Inch) Outer Dia. With Tri Clover Clamp 2.0 (Inch) Outer Dia. With Tri Clover Clamp 7.5 H.P. / 10.0 Kw. / 2880 RPM / 3 - Phase / 415 V. AE - PTS Receiver - 3.00 MM Thick sheet Material Inlet Wand AE - PTS - 16 x 10 Size 2500 to 3500 Kg./Hr. Contact Part Stainless Steel - 304 / 316 16 x 10 (In Inch) At 1 Time Storage capacity - 20 Kg. S.S. - 304 / 316. Top Cover with Silicon Rubber Gasket Total Size approx : 900 MM 3.0 (Inch) Outer Dia. With Tri Clover Clamp 3.0 (Inch) Outer Dia. With Tri Clover Clamp 10.0 H.P. / 10.0 Kw. / 2880 RPM / 3 - Phase / 415 V. Safety Valve. Silencer, Suitable for 7.5 H.P. Motor Safety Valve. Silencer, Suitable for 10 H.P. Motor 2.0 Micron (Anti - Static material) Cage - Stainless Steel - 316 Pneumatic Actuator & Silicon Gasket 3.0 Micron SS - 304 / 316, Air Condenser with Pressure Regulator 2.0 Flexible Hose Pipe Food Graded 3.0 Flexible Hose Pipe Food Graded Sequential Timer, Selector Switch & Main Switch Standard Make Purging System. Aira Make - 230 V Minimum 4.0 Kg. & Maximum 8 Kg. Continuosuly 3 - Phase / 415 Volt / 50 Hz. (Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

Advance PTS - Heavy Commercial / Powder Transfer Facility AE - PTS - 10 x 22 Size AE - PTS - 12 x 22 Size Transfer Rate : 3500 to 4000 Kg./Hr. 4000 to 6000 Kg./Hr. Output Output Receiver Size Receiver Strong Capacity Construction of PTS Receiver Fitting Arrangement Receiver Size Vacuum Intel Size Material Intel Size Main Motor Vacuum Pump Primary Filter Primary Filter Fitting Arrangement Butterfly Valve (Pneumatic Operated) Secondary Filter in Vacuum Pump Filter Clean Assembly Hose Pipe Control Panel (Operating Panel) Compressed Air Require (Client Scope) Power Supply (Client Scope) Contact Part Stainless Steel - 304 / 316 10 x 22 (In Inch) 12 x 22 (In Inch) At 1 Time Storage capacity - 50 Kg. At 1 Time Storage capacity - 80 Kg. AE - PTS Receiver - 3.00 MM Thick sheet Top Cover & white Neoprene Rubber Gasket Total Size approx : 1000 MM Total Size approx : 1200 MM 3.0 (Inch) Outer Dia. With Tri Clover Clamp 3.0 (Inch) Outer Dia. With Tri Clover Clamp 15 H.P. / 20.0 Kw. / 2880 RPM / 3 - Phase / 415 V. Safety Valve. Silencer, Suitable for 15 H.P. Motor 3.0 Micron (Anti - Static material) Cage - Stainless Steel - 304 10.0 DIA Pneumatic Actuator & Silicon Gasket 12.0 DIA Pneumatic Actuator & Silicon Gasket 3.0 Micron SS - 304 Air Condenser with Pressure Regulator 3.0 Flexible Hose Pipe Food Graded Sequential Timer, Selector Switch & Main Switch Minimum 4.0 Kg. & Maximum 8 Kg. Continuosuly 3 - Phase / 415 Volt / 50 Hz. Receiver Size Receiver Strong Capacity Construction of PTS Receiver Fitting Arrangement Receiver Size Vacuum Intel Size Material Intel Size Main Motor Vacuum Pump Primary Filter Primary Filter Fitting Arrangement Butterfly Valve (Pneumatic Operated) Secondary Filter in Vacuum Pump Filter Clean Assembly Hose Pipe Control Panel (Operating Panel) Compressed Air Require (Client Scope) Power Supply (Client Scope) AE - PTS - 12 x 36 Size 7000 to 10000 Kg./Hr. Contact Part Stainless Steel - 316 / 304 12 x 36 (In Inch) At 1 Time Storage capacity - 110 Kg. AE - PTS Receiver - 3.00 MM Thick sheet Top Cover & Silicon Rubber Gasket Total Size approx : 1300 MM 4.0 (Inch) Outer Dia. With Tri Clover Clamp 4.0 (Inch) Outer Dia. With Tri Clover Clamp 15 H.P. / 1440 RPM / 3 - Phase / 415 V. Safety Valve. Silencer, Suitable for 20 H.P. Motor 2.0 Micron (Anti - Static material) Cage - Stainless Steel - 304 12.0 DIA Pneumatic Actuator & Silicon Gasket 3.0 Micron SS - 304 Air Condenser with Pressure Regulator 4.0 Flexible Hose Pipe Food Graded Sequential Timer, Selector Switch & Main Switch Minimum 4.0 Kg. & Maximum 8 Kg. Continuosuly 3 - Phase / 415 Volt / 50 Hz. Advance Group of Company s Valuable Client List RANCHIS Amin a Healthcare Pvt. Ltd. BHC Bhagvati Herbals Care Pvt. Ltd. Lubrikote Specialities Pvt. Ltd.

Complete Online Roll Compactor Facility Dry Vacuum Pump Advance PTS Double Hopper Tablet Compression Charging Facility Service Area Dry Vaccum Pump at Service Area Vacuum Inlet Advance PTS - 8 Advance - PTS - 10 Advance - Compactor Material Inlet Advance - Double Side Granulator Advance BPD with IPC Bin Advance BPD with IPC Bin Advance - Vibro Shifter Advance - Bottom Pick up Device Output Receiver Size Receiver Strong Capacity Construction of PTS Receiver Fitting Arrangement Receiver Size along with Vacuum Intel Size Material Intel Size Main Motor Vacuum Pump Primary Filter Primary Filter Fitting Arrangement Butterfly Valve (Pneumatic Operated) Secondary Filter in Vacuum Pump Filter Clean Assembly Hose Pipe Control Panel (Operating Panel) Solenoid Valve Compressed Air Require (Client Scope) Power Supply (Client Scope) AE - PTS - 8 (Single Hopper & Y Chute) 50 to 300 Kg./Hr. Contact Part Stainless Steel - 316 8 (In Inch) At 1 Time Storage capacity - 09 Kg. AE - PTS Receiver - 2.5 MM Thick sheet S.S.-316. Top Cover with Silicon Rubber Gasket Total Size approx : 600 MM 1.5 (Inch) Outer Dia. With Tri Clover Clamp 1.5 (Inch) Outer Dia. With Tri Clover Clamp 3.0 H.P. / 5.0 Kw. / 2880 RPM / 3 - Phase / 415 V. Safety Valve. Silencer, Suitable for 3.0 H.P. Motor Pneumatic Actuator & Silicon Gasket 3.0 Micron SS-316, Air Condenser with Pressure Regulator Double Hopper Charging facility Double Side Rotary Tablet Compression machine 2.0 Micron (Anti - Static material) Cage - Stainless Steel - 316 AE - PTS - 10 (Double Hopper System) 50 to 400 Kg./Hr. Contact Part Stainless Steel - 316 10 (In Inch) At 1 Time Storage capacity - 15 Kg. AE - PTS Receiver - 2.5 MM Thick sheet S.S.-316. Top Cover with Silicon Rubber Gasket Total Size approx : 700 MM 1.5 (Inch) Outer Dia. With Tri Clover Clamp 1.5 (Inch) Outer Dia. With Tri Clover Clamp 5.0 H.P. / 7.5 Kw. / 2880 RPM / 3 - Phase / 415 V. Safety Valve. Silencer, Suitable for 5.0 H.P. Motor Pneumatic Actuator & Silicon Gasket 3.0 Micron SS-316, Air Condenser with Pressure Regulator 1.5 Flexible Hose Pipe Food Graded Sequential Timer, Selector Switch & Main Switch PLC Based HMI / MMI Operating Facility Purging System. Aira Make - 230 V Minimum 4.0 Kg. & Maximum 8 Kg. Continuosuly 3 - Phase / 415 Volt / 50 Hz. (Manufacturer & Exporter of Processing Machinery & Bulk Material Handling Systems) Regd. Add.: 42, Santdev Society Near, Jamfalwadi, Ramol - CTM Road, Ramol, Ahmedabad 382 449.Gujarat, India. Office & Works Add.: Shed No. 23, Parishram Industrial Estate, Near Janatanagar, Ramol C. T. M. Road, Ramol - 382 449. Ahmedabad, Gujarat, India. Contact No.: +91-97231 11833 / 84601 59849 / 95584 92849 / 98790 06571 E-mail : Advanceengineering2014@gmail.com / sales@advanceeng.net / info@advanceeng.net Website : http// www.advanceeng.net / www.advancepts.net / www.indiamart.com/advanceengineeringworks/ Benchmark Quality Since 2014@ ADVNACE

Advance - Bag Dump Station with Online Shifter charging Facility Advance - Online Bag Dump Station, with Shifter Screening & Storage Tank charging Facility with Zero Manpower Dry Vaccum Pump at Service Area Vaccum Pump Rated Vibro Shifter Storage Tank IPC Bin Advance Dust Collection Advance - Bag Dump Station Machine Name Code All Contact Part All Non-Contact Part Thickness of Sheet Main Material Inlet Material Discharge Main Motor Impellor Operating Control Panel Base Arrangement Other Parts Overall Dimension Approx weight Advance - Bottom Pick - Up Device Advance - IPC Bin & Solution Preparation Tank Advance - Bag Dump Station Advance - Bottom Pick - Up Device Advance - IPC Bin Advance - IPC Bin Code : AE - IPC - Bin Code : AE - IPC - Bin AE - BDS - 200 AE - BPD - 8 50/100/200/300/500/1000 Liters 50/70/100/250/500 Liters Stainless Steel - 304 (Optional Part in Stainless Steel - 316) Stainless Steel - 304 (Finishing : 220 Grit Mirror Finish) (Finishing : 220 Grit Mirror Finish) 2.0 MM Thcik 500 x 500 Rectangle Shape. With Guard 2.5 MM Thcik 250 MM DIA. Club with Bin & BDM 2.5 MM Thcik (Variable upon Requirement) Dishcarge Facility : Ball Valve of Hand Operated Butterfly Valve 250 MM DIA Butterfly Valve with Manually Hand Operated Sandwich Type 2.0 OD S.S. - 304 Pipe with T.C. Clamp Base Arrangement : 4 No. Of Leg. / Castor wheel with Locking facility 3.0 H.P. / 2880 RPM / 3 - Phase / 415 Volt Motor : 1 to 5 H.P. / 2880 RPM Note : Suitable or modify Aluminium Casing 250 MM DIA, M. S. Casing Not Applicable Shaft : Stirrer with Baffles as per machinery s Hopper S.S. - 304 Panel Box with DOL Starter Switch Drain : Gravity Force or inlet Provision 4 Nos. Of Legs with PU - Tubular Castor Wheels Half Openable Top Cover Attach additional Bottom Pick - Up Device 3 Micron Cartridge Filter & Ball Valve 900 L x 1100 W x 1400 H MM : Approx 400 L x 400 W x 2500 H MM : Approx Note : Approx : 290 kg. Approx : 5 kg. Design with application shallbe change as per requirement Advance Group of Company s Valuable Client List Hovid (Export) Mylan Laboratories Ltd. Alphamed Alphamed Formulation Morepen Laboratories Ltd.

Advance - Wet & Dry Granulation Processing flow chart with Advance Powder Transfer System Dry Granules Big Charging PTS Syster Advance - Compactor Machine Granulator / Multi-Mill / Sifter / Screening Fludization / Dring Process / Fluid Bed Dryer Wet Mixing Process / Rapid Mixer Granulator Advance - Roll Compactor Dry Granulation Processing with Advance - Powder Transfer Facility Tablet Coating Pan Machine Rotary Tablet Compression Machine Blending Mixer Dry Mixing. Granulator / Multi-Mill / Sifter / Screening