Performance: Spiral Bevel Series

Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications to give you a feel for our capabilities. GAM Spiral Bevel Gearboxes When you need a spiral bevel gearbox that you can count on, choose GAM. Our spiral bevel gearboxes are highly configurable, reliable, and economical right angle solutions designed for use in a wide range of applications. Precision cut spiral bevel gears are hardened and then lapped in pairs for ideal tooth contact and torque transmission, enabling 9-98% efficiencies and backlash between 10 and 0 arcmin (Reduced backlash versions available). Offered in 11 frame sizes, they can be constructed with a multitude of shaft configurations, and oriented in any direction to easily incorporate into your machine design. VC spiral bevel series shown with integrated motor mount. High efficiencies 9-98% Lubricated for life with synthetic oil 1 Includes motor mount 2 1. Housing Sturdy cast iron housing (Aluminum in size mm and mm) - all sides can be used for mounting 2. Bearings Deep groove ball bearings handle axial and radial loading. (Reinforced and taper roller options available). Spiral Bevel Gearing Precision cut, hardened, and lapped in pairs for ideal tooth contact. Mathematically precise ratios from 1:1 to :1. Input Available with shaft input or integrated motor adapter and coupling to easily mount to any IEC, NEMA, or servo motor. Solid shaft with key or keyed hollow shaft are standard. (Smooth shaft or shrink disc clamping available). Seals Lubricated for life and protected with high quality NBR seals. (Viton and FPM seals available) 1 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

V-Series, L-Series, VC-Series, LL-Series Shaft Input V-C0 Available Models L-C0 V-Series (mm to 0mm) L-Series ( mini mm & mm) Integrated Motor Mount Input VC-W VC-W VC-W VC-T VC-T Single Single Shaft VC-W Available Shaft Models VC-T VC-W VC-T Single Shaft Single Shaft VC-W Dual Dual Shaft Shaft Dual Shaft Dual Shaft VC-T Single Shaft Dual Shaft VC-S VC-S VC-S VC-S Smooth Hollow Shaft Smooth Hollow Shaft VC-K VC-K VC-K VC-K VC-K Smooth Smooth Hollow Hollow Shaft Shaft Keyed Keyed Hollow Hollow Shaft Shaft Keyed Hollow Shaft Keyed Hollow Shaft LL-W VC-Series (mm to 200mm) Smooth hollow output with zero backlash shrink disc Keyed hollow output LL-Series ( mini mm & mm) For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings 2

L8 f V Series & L Series ØD f7 ØD L7 ØD2 j ØD f7 ØD L L L L8 f f f1 2 ØD1j ØD1 f7 ØD B0 C0 G0 H0 L7 ØD2 j 0 9 1 1 L D0 J0 ØD1j f f1 ØD1 f7 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0, C0, D0, G0, H0, J0 Applies to models A0, F0, M0 Dimension 2 Model L-Series V-Series 0 0 0 090 120 Description mm mm mm mm mm D Bolt Circle 29 9 7 100 0D f7 Small Pilot Diameter 22 2 0 80 D f7 Pilot Diameter 89 119 9 1 Housing Thread Mx8 Mx8 Mx12 M8x1 M10x1 1 L Housing Size 90 120 Housing Bolt Location 2 0 70 100 9 Centerline to Input Pilot 2 0. 2 7 ØD - Ratio 1:1 1:1-2:1 :1 :1 :1 - :1 1:1-2:1 :1 :1 :1 - :1 1:1-2:1 :1 :1 :1 - :1 1:1-2:1 :1 :1 :1 - :1 D1 j Input Shaft Diameter 10 10 10-12 12 - - 18 12 12 12 2 20 20 1 - Input Shaft Key Width 2 - - - 8 - Input Shaft Key Length 10 18 18 18-20 20 - - 28 28 28 28 28 - Input Shaft Key Height 0.9 1.2 1.2 1.2-1. 1. 2. 1. 1. 1. 2. 2. 2 D12 Input Step Diameter 10 1 1 1-17 17 - - 2 20 20 20 0 2 2 20 D1 f7 Input Hub Pilot Diameter 22 2 2 2 - - - 0 0 0 0 80 80 80 70 f Input Shaft Thread (DIN 2) M M M M - M M - - M M M M M10 M M M L Centerline to End of Input Shaft 9 78 78 78-100 100 - - 122 122 12 12 12 12 172 12 0 Input Shaft Length 1 2 2 2-2 2 - - 1 Centerline to Input Hub - 72 72 - - 8 8 9 9 11 11 12 12 D2 j Shaft Diameter 10 12 18 2 - Shaft Key Width 2 8 - Shaft Key Length 10 18 20 28 - Shaft Key Height 0.9 1.2 1. 2. D Step Diameter 10 1 17 0 f1 Flange Thread Mx Mx8 Mx9. M8x10 M10x12 f Shaft Thread (DIN 2) M M M M M10 L Shaft to Centerline 0 7. 72 9 122 L Pilot Height. 8 9. 10 12 L7 Small Pilot Height 1. 2 2 2 L8 Shaft Length 1 2 2 D2 j Shaft Diameter 10 12 18 2 - Shaft Key Width 2 8 - Shaft Key Length 10 18 20 28 - Shaft Key Height 0.9 1.2 1. 2. D Step Diameter 10 1 17 0 0 D1 f7 Hub Pilot Diameter 22 2 0 80 f1 Flange Thread Mx Mx8 Mx9. M8x10 M10x1 f Shaft Thread (DIN 2) M M M M M10 L Shaft to Centerline 9 78 100 122 12 L Pilot Height. 8 9. 10 1 L8 Shaft Length 1 2 2 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

L8 f ØD f7 ØD ØD1 f7 ØD2 j L f ØD1j A0 L L ØD f7 L8 ØD2 j f ØD ØD1 f7 0 f1 2 9 1 1 L ØD1 f7 ØD F0 M0 ØD1j f f1 ØD1 f7 Major Dimensions (Applies to allmodels) Input Dimensions that change based on ratio Applies to models B0, C0, D0, G0, H0, J0 Applies to models A0, F0, M0 2 V-Series Dimension 10 10 200 20 20 0 mm mm mm mm mm mm D 11 1 17 200 20 0* D 0 f7 90 110 120 10 10 20 D f7 1 19 199 22 2 9 1 1 M10x20 M12x2 M12x2 M1x20 M1x2 M20x2** L 10 10 200 20 20 0 110 120 10 180 220 28 9 8 9 120 1 10 198-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1 - :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 D1 j 2 28 2 2 28 2 2 2 28 0 0 0 80-10 8 8 8 10 8 8 8 12 10 10 8 1 12 12 10 18 1 1 1 22 18 18 1-0 0 0 0 70 80 70 70 100 80 80 80 10 12 12 90-2.... D12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 90 90 90 72 D1 f7 90 90 8 8 110 100 100 100 120 120 120 110 10 10 10 10 10 10 10 10 20 20 20 20 f M12 M10 M8 M8 M12 M10 M8 M8 M1 M12 M12 M10 M20 M1 M1 M1 M20 M1 M1 M1 M20 M20 M20 M20 L 180 180 19 19 212 212 22 22 27 21 21 21 0 10 10 00 80 0 0 0 70 0 0 10 0 0 0 0 0 0 0 0 0 80 8 8 8 90 80 80 70 110 90 90 90 170 10 10 110 1 128 128 1 1 10 10 170 170 190 190 190 190 21 228 228 228 2 2 2 2 9 9 9 9 D2 j 2 2 0 80-10 10 12 1 18 22-0 70 80 100 10 - D 0 0 0 90 f1 M10x12 M12x1 M12x17 M1x17 M1x20 M20x0 f M12 M12 M1 M20 M20 M20 L 17 10 20 20 28 10 L 12 1 17 17 20 0 L7 20 L8 0 0 80 90 110 170 D2 j 2 2 0 80-10 10 12 1 18 22-0 70 80 100 10 - D 0 0 0 90 D1 f7 90 110 120 10 10 20 f1 M10x1 M12x1 M12x20 M1x20 M1x20 - f M12 M12 M1 M20 M20 M20 L 180 212 27 0 80 70 L 1 1 20 20 20 2 L8 0 0 80 90 110 170 *Does not apply to A0, F0, M0 **All sides of the housing ØD

L L V Series & L Series ØD f7 ØD1 L7 ØD1 j E0 L L f f1 ØD1 f7 ØD f7 ØD1 2 ØD K0 L7 0 9 1 1 L 7 ØD11 H7 ØD1 j f f1 ØD1 f7 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models E0 and K0 Applies to models E0/HSD, K0/HSD Model2 L-Series V-Series Dimension 0 0 0 090 120 Description mm mm mm mm mm D Bolt Circle 29 9 7 100 D f7 0 Small Pilot Diameter 22 ØD11 H7 2 0 80 D f7 Pilot Diameter 89 119 9 1 Housing Thread Mx8 Mx8 Mx12 M8x1 M10x1 1 Housing L Size 90 120 Housing Bolt Location 2 0 70 100 9 Centerline to Input Pilot 2 0. 2 7 ØD 7 - Ratio 1:1 1:1-2:1 :1 :1 :1 - :1 1:1-2:1 :1 :1 :1 - :1 1:1-2:1 :1 :1 :1 - :1 1:1-2:1 :1 :1 :1 - :1 D1 j Input Shaft Diameter 10 10 10-12 12 - - 18 12 12 12 2 20 20 1 - Input Shaft Key Width 2 - - - 8 - Input Shaft Key Length 10 18 18 18-20 20 - - 28 28 28 28 28 - Input Shaft Key Height 0.9 1.2 1.2 1.2-1. 1. 2. 1. 1. 1. 2. 2. 2 D12 Input Step Diameter 10 1 1 1-17 17 - - 2 20 20 20 0 2 2 20 D1 f7 Input Hub Pilot Diameter 22 2 2 2 - - - 0 0 0 0 80 80 80 70 f Input Shaft Thread (DIN 2) M M M M - M M - - M M M M M10 M M M L Centerline to End of Input Shaft 9 78 78 78-100 100 - - 122 122 12 12 12 12 172 12 0 Input Shaft Length 1 2 2 2-2 2 - - 1 Centerline to Input Hub - 72 72 - - 8 8 9 9 11 11 12 12 D11 H7 Hollow Shaft Diameter 10 12 18 2 D1 Extended Shaft Diameter 10 1 20 0 0 f1 Flange Thread Mx Mx8 Mx9. M8x10 Special M10x12 L Pilot Height. 8 9. 10 12 L7 Small Pilot Height 1. 2 2 2 Hollow Shaft to Centerline 2.. 2 80 JS9 Hollow Shaft Key Width 2 8 7 Hollow Shaft Height with Keyway 7 11. 1.8 20.8 28. D7 H *** Smooth Hollow Shaft Diameter 1 - - 12 18 2 D8 Opened up inner Diameter - - 1 19 2 D9 H7 **** Smooth Hollow Shaft Diameter 2 - - 1 20 27 D10 Shrink Disc OD - - 8 0 0 D1 Extended Shaft Diameter - - 20 0 0 f1 Flange Thread - - Mx9. M8x10 M10x12 L Pilot Height - - 9. 10 12 L7 Small Pilot Height - - 2 2 2 Stub Shaft Length - - 1 18 22 Hollow Bore 1 Depth 1 - - 2 28 2 Hollow Shaft to Centerline - - 2 80 Shrink Disc to Centerline - - 87 107 ***Mating shaft should have j tolerance ****Mating shaft should have h tolerance For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

L L SHAFT DETAIL Ø D8 2 ØD f7 ØD1 Ø D10 ØD f7 L L L L ØD1 SHAFT DETAIL Ø D8 2 L7 ØD1 j Ø D10 Ø D9 H7 E0/HSD Ø D7 H ØD f7 L7 L7 ØD1 j f ØD1 f7 f1 ØD1 j f 2 ØD ØD1 f7 Ø D9 H7 0 Ø D7 H f f1 2 9 1 1 L ØD1 f7 ØD K0/HSD Special Major Dimensions (Applies to allmodels) Input Dimensions that change based on ratio Applies to models E0 and K0 Applies to models E0/HSD, K0/HSD V-Series Dimension 0 10 10 200 20 20 0 mm mm mm mm mm mm D 9 11 1 1 17 200 20 0* 1 D f7 90 110 120 10 10 20 L D f7 1 19 199 22 2 M10x20 M12x2 M12x2 M1x20 M1x2 M20x2** 10 10 200 20 20 0 110 120 10 180 220 28 9 8 9 120 1 10 198-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1 - :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 D1 j 2 28 2 2 28 2 2 2 28 0 0 0 80-10 8 8 8 10 8 8 8 12 10 10 8 1 12 12 10 18 1 1 1 22 18 18 1-0 0 0 0 70 80 70 70 100 80 80 80 10 12 12 90-2.... D12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 90 90 90 72 D1 f7 90 90 8 8 110 100 100 100 120 120 120 110 10 10 10 10 10 10 10 10 20 20 20 20 f M12 M10 M8 M8 M12 M10 M8 M8 M1 M12 M12 M10 M20 M1 M1 M1 M20 M1 M1 M1 M20 M20 M20 M20 L 180 180 19 19 212 212 22 22 27 21 21 21 0 10 10 00 80 0 0 0 70 0 0 10 0 0 0 0 0 0 0 0 0 80 8 8 8 90 80 80 70 110 90 90 90 170 10 10 110 1 128 128 1 1 10 10 170 170 190 190 190 190 21 228 228 228 2 2 2 2 9 9 9 9 D11 H7 2 2 0 80 D1 0 70 80 80 10 f1 M10x12 M12x1 M12x17 M1x17 M1x20 M20x0 L 12 1 17 17 20 0 L7 20 90 10 12 12. 10 20 JS9 10 10 12 1 18 22 7. 8.. 9.. 8. D7 H*** 2 2 0 80 D8 1 81 D9 H7**** 7 7 2 82 D10 80 80 100 18 18 170 D1 0 70 80 80 10 f1 M10x12 M12x1 M12x17 M1x17 M1x20 M20x0 L 12 1 17 17 20 0 L7 20 2 2 2 0 0 0 0 0 0 90 10 12 12. 10 20 122 1 12 182. 200 29 *** Mating shaft should have j tolerance **** Mating shaft should have h tolerance

V Series & L Series Model L-Series V-Series Size 0 0 0 090 120 Ratios Available 1:1 1,2,,:1 1, 1., 2, :1 1, 1., 2,,,, :1 Ratio Input Speed (RPM) 0. 0.02 9 0.0 18 0.1 0 0.28 10 0.72 20. 0.12 9 0.28 17 0.7 1.21 12.9 00 0.22 8 0.1 1 0.8 0 2.2 11. 1:1 70. 0.298 7. 0.0 1 1.07 7.0 10 8.1 1000. 0.8 7 0.772 12 1.2.7 92 10.1 100 0.9 0.992 11 1.82 2.29 82 1. 200 2. 0.. 1.19 10 2. 28 7.1 70 18.2 000 2 0.1 1.2 10.1 27 8.9 21.82 0 - - - - 18 0.07 0.1 11 0.1 20 - - - - 17 0.1 0 0.7 108 1.99 00 - - - - 1 0. 7 1. 10.8 1.:1 70 - - - - 1 0.72 1.9 9.18 1000 - - - - 12 0.88 2 2. 8.2 100 - - - - 11 1.21 29.2 78 8. 200 - - - - 10 1.7 2.9 11. 000 - - - - 10 2.2 2.1 1 1. 0 - - 7 0.019 18 0.0 7 0.1 107 0.29 20 - -. 0.09 17 0.2 0. 98 1. 00 - - 0.1 1 0.1 0.9 92 2. 2:1 70 - -.7 0.2 1 0. 2 1.2 8. 1000 - -. 0.0 12 0. 1 1.71 81. 100 - - 0.1 11 0.91 27 2.2 7.0 200 - -.7 0.28 10 1.2 2.17 1 8.07 000 - -. 0.7 10 1. 2.8 9.2 0 - -. 0.01 1 0.0 7 0.07 110 0.21 20 - - 0.0 1 0.12 0. 9 0.87 00 - -. 0.08 1 0.2 0. 90 1. :1 70 - -.2 0.11 12 0. 2 0.88 87 2. 1000 - - 0.17 12 0. 1 1.1 82.01 100 - -. 0.19 11 0.1 27 1.9 7.08 200 - -. 0. 10 0.88 2 2.12. 000 - - 0.1 10 1.1 2 2. 8.9 0 - -. 0.00 - - 7 0.0 90 0.12 20 - -. 0.01 - - 0.2 87 0. 00 - -.2 0.09 - - 0.7 8 1.1 :1 70 - -.2 0.087 - - 2 0. 82 1.9 1000 - - 0.11 - - 1 0.8 79 2.18 100 - -.7 0.1 - - 27 1.12 7.0 200 - -. 0.28 - - 2 1. 7. 000 - -. 0.289 - - 2 1.9 0.9 0 - - - - - - 7 0.0 9 0.1 20 - - - - - - 0.2 92 0.1 00 - - - - - - 0.7 89 0.98 :1 70 - - - - - - 2 0. 8 1.2 1000 - - - - - - 1 0.8 80 1.7 100 - - - - - - 27 0.89 72 2.8 200 - - - - - - 2 1.2. 000 - - - - - - 2 1.2 0.97 0 - - - - - - 0.0 0.0 20 - - - - - - 0 0.1 71 0. 00 - - - - - - 29 0.27 9 0. :1 70 - - - - - - 29 0. 8 0.9 1000 - - - - - - 29 0. 1.22 100 - - - - - - 27 0.7 1.7 200 - - - - - - 2 1.09 7 2. 000 - - - - - - 2 1.2 2.9 Standard Backlash arcmin All Ratios <1 <1 <20 <20 <20 Allowable Radial Loading* N Models B0, C0, Contact GAM Contact GAM 70 120 1900 Allowable Axial Loading N D0, G0, H0, J0 Contact GAM Contact GAM 7 2 90 Allowable Radial Loading* N Models E0, E0/ Contact GAM Contact GAM Contact GAM 120 2100 HSD, K0, K0/ Allowable Axial Loading N HSD Contact GAM Contact GAM Contact GAM 2 100 Allowable Radial Loading* N Models A0, M0, Contact GAM Contact GAM 0 700 110 F0, or input Allowable Axial Loading N shafts Contact GAM Contact GAM 22 0 7 Efficiency at Load 9-98% Service Life / Housing Material 10,000 hours / Aluminum 1,000 hours / Cast Iron Lubrication Synthetic Oil Synthetic Oil *Load applied at the center of shaft @ 100RPM 7 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

Model V-Series Size 10 10 200 20 20 0 Ratios Available 1, 1., 2,,,, :1 Ratio Input Speed (RPM) 0 220 1.21 80 2.09 70.1 1270 7 170 9. 0 2.7 20 21.92 0 9. 710 19. 970 2.7 10 2. 0 9.2 00 208 11. 0 18.19 20.17 820.19 120 72.7 2820 1.1 1:1 70 19 1.2 10 2..88 7 0.7 1170 9.72 270 19.92 1000 18 20.28 290 1.9 10.21 0 71. 100 11.7 1910 210. 100 12 2.78 20 2.99 0 7. 0 87. 90 17.07 120 27.8 200 10 7.0 218 7.7 - - - - - - - - 000 120 9.8 - - - - - - - - - - 0 210 0.7 1.29 70 2.7 10.89 1700.18 00 1. 20 20.7 0.07 90 12.7 1120 20.7 190 27. 0 7.11 00 200 7. 1 11. 1 22.7 920.9 100 7.72 070 112. 1.:1 70 190 10.7 29 1.2 0 0.1 82.7 1170.8 20 11.2 1000 17 12.87 280 20.9 0 7.1 7.21 100 77.19 20 188. 100 1 17.08 22 27.78 7 8.17 72.2 90 10.71 1870 20.19 200 12 22.22 20.1 0.9 18 91. 900 18.72 - - 000 11 2.91 18 0.78 0 72.7 0 99.2 80 189.8 - - 0 200 0. 0.98 70 2.07 10. 10. 0 12.79 20 190 2.2 20.1 80 9.7 122 1.88 10 20.12 90.1 00 180.9 00 8.27 10 1.81 970 2.7 1280.27 0 9.2 2:1 70 1.8 280 11.7 0 22.2 890.79 1170 8. 10 129.7 1000 12 8.8 270 1.88 00 27. 820.19 100 7.87 2820 1.1 100 18 11.1 2 20.2 2.1 71 9.11 90 78. 220 200.0 200 111 1.8 19 2. 2.2 0 80.02 80 112. - - 000 100 1. 170 28.11 10 1.2 0 87. 810 1.92 - - 0 180 0. 0 0.7 90 1.29 870 1. 10 2. 20 7.79 20 177 1.2 280 2. 0.7 82 7.8 1220 11.1 70.2 00 17.2 20.79 00 11.0 7 1.07 1110 20. 20 9. :1 70 17. 20.89 80 1.98 700 19.29 100 28.9 290 81.29 1000 10.87 2 8.99 20.7 2. 990. 220 9.2 100 1 8.0 20 12.8 1 28.8 0 29.7 900 9. 2220 122. 200 10 11. 202 17.81 9.2 0 9.8 821 72.9 1820 10.8 000 110 12.12 190 20.9 20.29 00.09 780 8.97 - - 0 170 0.2 280 0.9 80 0.8 980 1. 120 1.82 00.17 20 12 1.12 270 1.8 0.79 870.99 120 8.1 2820 19. 00 1 2.12 20.8 2 7.2 79 10.9 1180 1.2 220.72 :1 70 18.0 20.17 10 10. 7 1.19 1100 22.7 220 7.9 1000 1.7 20.1 8 1. 7 18. 100 28.9 2110 8.1 100 120.9 220 9.09 18.81 00 2.8 900 7.2 1910 78.9 200 111 7. 200 1.2 00 2. 9 2.7 780 1.8 1720 11.7 000 10 8.1 180 1.88 0 28.9 0.7 700 7.87 - - 0 10 0.17 290 0.2 2 0.8 990 1.09 10 1.7 20. 20 1 0.79 270 1.9 0 2.78 920.07 1290 7.11 2920 1.09 00 1 1. 20 2.7 70.18 80 9.1 1200 1.2 220 2.7 :1 70 10 2.1 20.97 0 7.27 770 12.7 1100 18.19 2170.88 1000 12 2.7 22.9 20 9.2 71 1.7 990 21.82 1920 2. 100 11.8 21 7.11 80 12.7 21 880 29.1 1710. 200 10. 198 10.8 0 17.99 0 29.1 70 0.21 190 78.8 000 100.1 180 11.9 00 19.8 10.7 700.29 - - 0 120 0.11 197 0.18 0 0.28 2 0.7 91 0.87 2120 1.9 20 121 0. 199 0.92 11 1. 10 2.82 90. 2020 9.28 00 119 1.09 187 1.72 0 2.79 90.2 878 8.0 1820 1.72 :1 70 117 1.1 17 2. 289.98 7.78 792 10.91 170 2.2 1000 112 2.0 1.01 28.7 0 9.92 702 12.9 1710 1.1 100 107 2.9 1.9 27. 90 1. 9 1. 110 1.1 200 10.8 1.98 218 9. 10 18.08 2 2.12 1290.88 000 9.18 129 7.09 208 11. 20.17 9 27.27 - - arcmin All Ratios <20 <20 <20 <20 <20 <20 N Models B0, C0, 000 000 8000 1000 22000 200 N D0, G0, H0, J0 100 200 000 700 11000 17100 N Models E0, E0/ 000 00 9000 100 22000 200 HSD, K0, K0/ N HSD 100 20 00 770 11000 17100 N Models A0, M0, 1700 280 000 1120 1700 200 F0, or input N shafts 80 12 200 2 870 17100 Efficiency at Load 9-98% Service Life / Housing Material 10,000 hours / Aluminum 1,000 hours / Cast Iron Lubrication Synthetic Oil Synthetic Oil 8

V Series & L Series Model Input Speed A0 B0 C0 D0 E0 E0/HSD L-Series V-Series 0 0 0 090 120 Size 1:1 1,2,,:1 1, 1., 2, :1 1, 1., 2,,,, :1 Ratios Avail. (g) (g) 1:1 Contact GAM 20 Contact GAM 10 0.888 2. 2.90.1 10.97 12. 1.:1 - - - - 0.20 2. 1.822.1.809 12. 2:1 - - Contact GAM 10 0.189 2. 1.17.1. 12. :1 - - Contact GAM 10 0.10 2. 0.888.1 2.19 12. :1 - - Contact GAM 10 - - 0.1.1 1.21 12. :1 - - - - - - 0.28.1 0.71 12. :1 - - - - - - 0.02.1 0.7 12. 1:1 Contact GAM 22 Contact GAM 00 0.21 2.2.. 1.022 12. 1.:1 - - 0.111 2.2 2.18. 7.1 12. 2:1 - - Contact GAM 00 0.20 2.2 1.2..977 12. :1 - - Contact GAM 00 0.1001 2.2 1.0..012 12. :1 - - Contact GAM 00 - - 0.07. 1.729 12. :1 - - - - - - 0.9. 1.09 12. :1 - - - - - - 0.02. 0.8982 12. 1:1 Contact GAM 22 Contact GAM 00 0.21 2.2.. 1.022 12. 1.:1 - - 0.111 2.2 2.18. 7.1 12. 2:1 - - Contact GAM 00 0.20 2.2 1.2..977 12. :1 - - Contact GAM 00 0.1001 2.2 1.0..012 12. :1 - - Contact GAM 00 - - 0.07. 1.729 12. :1 - - - - - - 0.9. 1.09 12. :1 - - - - - - 0.02. 0.8982 12. 1:1 Contact GAM 20 Contact GAM 0 0.0 2..827. 1.99 12. 1.:1 - - - - 0.1 2. 2.199. 7.72 12. 2:1 - - Contact GAM 0 0.2 2. 1.72..090 12. :1 - - Contact GAM 0 0.1012 2. 1.09..0 12. :1 - - Contact GAM 0 - - 0.2. 1.91 12. :1 - - - - - - 0.9. 1.0712 12. :1 - - - - - - 0.10. 0.90 12. 1:1 Contact GAM 210 Contact GAM 0 0.7 2.1.207 1.199 12 1.:1 - - - - 0. 2.1 2.172 7.99 12 2:1 - - Contact GAM 0 0.28 2.1 1.9.97 12 :1 - - Contact GAM 0 0.12 2.1 1.00.000 12 :1 - - Contact GAM 0 - - 0.2 1.1 12 :1 - - - - - - 0.892 1.00 12 :1 - - - - - - 0.7 0.892 12 1:1 - - - - 0.012 2.1.921.2 1.9812 12. 1.:1 - - - - 0.892 2.1 2..2 8.190 12. 2:1 - - - - 0.111 2.1 1.09.2.9 12. :1 - - - - 0.2782 2.1 1.109.2.1988 12. :1 - - - - - - 0.91.2 1.7778 12. :1 - - - - - - 0.10.2 1.12 12. :1 - - - - - - 0.0.2 0.99 12. 9 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

Model Input Speed A0 B0 C0 D0 E0 E0/HSD V-Series 10 10 200 20 20 0 Size 1, 1., 2,,,, :1 Ratios Avail. of Inertia of Inertia 1:1 2.270 19 29.710 28. 121.222 2 Contact GAM 79 81.2000 8 Contact GAM 29 1.:1 11.89 19 19.7 28. 7.90 2 Contact GAM 79 0.9 8 Contact GAM 29 2:1 8.72 19 12.89 28..09 2 Contact GAM 79 19.270 8 Contact GAM 29 :1. 19 8.91 28. 18.822 2 Contact GAM 79 8.08 8 Contact GAM 29 :1 1.82 19.8 28. 1.21 2 Contact GAM 79.778 8 Contact GAM 29 :1 19 2.27 28..170 2 Contact GAM 79 7.280 8 Contact GAM 29 :1 1.708 19 2.0901 28..881 2 Contact GAM 79 1.808 8 Contact GAM 29 1:1.099 18. 1.27 28 17.7000 8 Contact GAM 7 827.00 8 Contact GAM 280 1.:1 18.71 18. 2.02 28 10.829 8 Contact GAM 7 18.222 8 Contact GAM 280 2:1 12.278 18. 20.100 28 71.21 8 Contact GAM 7 281.0 8 Contact GAM 280 :1 7.97 18. 12.080 28.191 8 Contact GAM 7 117.2211 8 Contact GAM 280 :1 2.978 18. 8.198 28 22.7181 8 Contact GAM 7.8 8 Contact GAM 280 :1 2.211 18..887 28 12.8770 8 Contact GAM 7 0.01 8 Contact GAM 280 :1 1.82 18. 2.907 28 10.01 8 Contact GAM 7 0.709 8 Contact GAM 280 1:1.099 18. 1.27 28 17.7000 8 Contact GAM 7 827.00 8 Contact GAM 280 1.:1 18.71 18. 2.02 28 10.829 8 Contact GAM 7 18.222 8 Contact GAM 280 2:1 12.278 18. 20.100 28 71.21 8 Contact GAM 7 281.0 8 Contact GAM 280 :1 7.97 18. 12.080 28.191 8 Contact GAM 7 117.2211 8 Contact GAM 280 :1 2.978 18. 8.198 28 22.7181 8 Contact GAM 7.8 8 Contact GAM 280 :1 2.211 18..887 28 12.8770 8 Contact GAM 7 0.01 8 Contact GAM 280 :1 1.82 18. 2.907 28 10.01 8 Contact GAM 7 0.709 8 Contact GAM 280 1:1 7.081 19 2.820 28. 177.817 0 Contact GAM 78 81.800 88 Contact GAM 287 1.:1 19.1878 19 2.818 28. 10.98 0 Contact GAM 78 8. 88 Contact GAM 287 2:1 12.21 19 20.79 28. 72.008 0 Contact GAM 78 28.97 88 Contact GAM 287 :1 8.09 19 12.197 28..9 0 Contact GAM 78 2.27 88 Contact GAM 287 :1 2.792 19 8.81 28. 22.910 0 Contact GAM 78 7. 88 Contact GAM 287 :1 2.20 19.7299 28. 1.001 0 Contact GAM 78 0.900 88 Contact GAM 287 :1 1.898 19 2.99 28. 10.182 0 Contact GAM 78 1.102 88 Contact GAM 287 1:1 2.0 18.81 27 201.90 8 Contact GAM 71 828.900 82 Contact GAM 29 1.:1 17.220 18.11 27 109.027 8 Contact GAM 71 1.222 82 Contact GAM 29 2:1 11.19 18 20.8 27 7.1 8 Contact GAM 71 287.897 82 Contact GAM 29 :1 7.729 18 12.1 27.2209 8 Contact GAM 71 120.1100 82 Contact GAM 29 :1 2.80 18 8.11 27 2.88 8 Contact GAM 71 8.2888 82 Contact GAM 29 :1 2.079 18.7791 27 1.8070 8 Contact GAM 71 1.0 82 Contact GAM 29 :1 1.771 18.008 27 10.707 8 Contact GAM 71 1.21 82 Contact GAM 29 1:1 9.0 18.7 0.70 27. 222.12 9. Contact GAM 72 892.00 8.9 Contact GAM 2 1.:1 20.091 18.7.971 27. 118.707 9. Contact GAM 72 1.11 8.9 Contact GAM 2 2:1 1.0198 18.7 22.282 27. 81.89 9. Contact GAM 72 0.8100 8.9 Contact GAM 2 :1 8.282 18.7 1.00 27. 7.7 9. Contact GAM 72 127.1800 8.9 Contact GAM 2 :1 2.881 18.7 8.92 27. 2.72 9. Contact GAM 72 72.2 8.9 Contact GAM 2 :1 2.299 18.7.007 27. 1.79 9. Contact GAM 72.988 8.9 Contact GAM 2 :1 1.929 18.7.179 27. 11.291 9. Contact GAM 72.19 8.9 Contact GAM 2 70

V Series & L Series Model Input Speed F0 G0 H0 J0 K0 K0/HSD M0 L-Series V-Series 0 0 0 090 120 Size 1:1 1,2,,:1 1, 1., 2, :1 1, 1., 2,,,, :1 Ratios Avail. (g) (g) 1:1 Contact GAM 290 Contact GAM 700 0.82 2.7.88. 1.7 1 1.:1 - - 0.270 2.7 2.008. 7.177 1 2:1 - - Contact GAM 700 0.22 2.7 1...987 1 :1 - - Contact GAM 700 0.122 2.7 1.00. 2.8991 1 :1 - - Contact GAM 700 - - 0.0. 1. 1 :1 - - - - - - 0.70. 0.91 1 :1 - - - - - - 0.18. 0.822 1 1:1 Contact GAM 28 Contact GAM 0 0.17 2..8.9 20.10 1.7 1.:1 - - - - 0. 2..098.9 9.922 1.7 2:1 - - Contact GAM 0 0.8 2. 2.1890.9 7.090 1.7 :1 - - Contact GAM 0 0.1821 2. 1.7927.9.70 1.7 :1 - - Contact GAM 0 - - 0.78.9 2.12 1.7 :1 - - - - - - 0.9.9 1.009 1.7 :1 - - - - - - 0.20.9 1.290 1.7 1:1 Contact GAM 28 Contact GAM 0 0.17 2..8.9 20.10 1.7 1.:1 - - - - 0. 2..098.9 9.922 1.7 2:1 - - Contact GAM 0 0.8 2. 2.1890.9 7.090 1.7 :1 - - Contact GAM 0 0.1821 2. 1.7927.9.70 1.7 :1 - - Contact GAM 0 - - 0.78.9 2.12 1.7 :1 - - - - - - 0.9.9 1.009 1.7 :1 - - - - - - 0.20.9 1.290 1.7 1:1 Contact GAM 290 Contact GAM 90 0.27 2.7.22 7 20.88 1.9 1.:1 - - - - 0.97 2.7.109 7 10.08 1.9 2:1 - - Contact GAM 90 0.708 2.7 2.191 7 7.8 1.9 :1 - - Contact GAM 90 0.182 2.7 1.798 7.7780 1.9 :1 - - Contact GAM 90 - - 0.7 7 2.798 1.9 :1 - - - - - - 0.81 7 1.128 1.9 :1 - - - - - - 0.217 7 1.7 1.9 1:1 Contact GAM 270 Contact GAM 20 0.98 2..02. 20.27 1. 1.:1 - - - - 0.17 2..007. 9.900 1. 2:1 - - Contact GAM 20 0.20 2. 2.11. 7.2819 1. :1 - - Contact GAM 20 0.2 2. 1.7812..70 1. :1 - - Contact GAM 20 - - 0.77. 2. 1. :1 - - - - - - 0.28. 1.9 1. :1 - - - - - - 0.180. 1.20 1. 1:1 - - - - 0.79 2..2008.7 22.200 1.7 1.:1 - - - - 0. 2..88.7 10.98 1.7 2:1 - - - - 0. 2. 2.07.7 7.7287 1.7 :1 - - - - 0.02 2. 1.87.7.91 1.7 :1 - - - - - - 0.7792.7 2.1 1.7 :1 - - - - - - 0.89.7 1.81 1.7 :1 - - - - - - 0.7.7 1.77 1.7 1:1 Contact GAM 290 Contact GAM 700 0.82 2.7.88. 1.7 1 1.:1 - - - - 0.98 2.7 2.97. 7.90 1 2:1 - - Contact GAM 700 0.192 2.7 1.97..9808 1 :1 - - Contact GAM 700 0.18 2.7 1...08 1 :1 - - Contact GAM 700 - - 0.2. 2.107 1 :1 - - - - - - 0.98. 1.292 1 :1 - - - - - - 0.79. 1.207 1 71 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

Model Input Speed F0 G0 H0 J0 K0 K0/HSD M0 V-Series 10 10 200 20 20 0 Size 1, 1., 2,,,, :1 Ratios Avail. of Inertia kg cm²) of Inertia 1:1 9.00 2.0 181.878 0 Contact GAM 97 1221.000 10 Contact GAM 0 1.:1 17.90 2 2.209 8.00 0 Contact GAM 97 8.87 10 Contact GAM 0 2:1 11.99 2 1.078 1.1 0 Contact GAM 97 29.000 10 Contact GAM 0 :1 7.899 2 10.000 2.8 0 Contact GAM 97 10.17 10 Contact GAM 0 :1 2.1 2 7.20 18.0 0 Contact GAM 97 72.217 10 Contact GAM 0 :1 2.07 2 2.87 8.721 0 Contact GAM 97.80 10 Contact GAM 0 :1 1.7 2 2.022 7.0721 0 Contact GAM 97.117 10 Contact GAM 0 1:1 9.229 22.7.882. 2.21 8 Contact GAM 100 12.00 109 Contact GAM 72 1.:1 2.7711 22.7.081. 1.0 8 Contact GAM 100 29.222 109 Contact GAM 72 2:1 17.71 22.7 28.20. 92.77 8 Contact GAM 100 7.80 109 Contact GAM 72 :1 12.910 22.7 19.8..2891 8 Contact GAM 100 17.0711 109 Contact GAM 72 :1.7202 22.7 1.927..191 8 Contact GAM 100 87.998 109 Contact GAM 72 :1.2180 22.7.8. 1.990 8 Contact GAM 100 71.01 109 Contact GAM 72 :1 2.88 22.7.187. 1.7 8 Contact GAM 100 1.209 109 Contact GAM 72 1:1 9.229 22.7.882. 2.21 8 Contact GAM 100 12.00 109 Contact GAM 72 1.:1 2.7711 22.7.081. 1.0 8 Contact GAM 100 29.222 109 Contact GAM 72 2:1 17.71 22.7 28.20. 92.77 8 Contact GAM 100 7.80 109 Contact GAM 72 :1 12.910 22.7 19.8..2891 8 Contact GAM 100 17.0711 109 Contact GAM 72 :1.7202 22.7 1.927..191 8 Contact GAM 100 87.998 109 Contact GAM 72 :1.2180 22.7.8. 1.990 8 Contact GAM 100 71.01 109 Contact GAM 72 :1 2.88 22.7.187. 1.7 8 Contact GAM 100 1.209 109 Contact GAM 72 1:1 0.210 2.2 7.17 28. 0 Contact GAM 102 128.900 112 Contact GAM 79 1.:1 2.207 2.2.2 1.718 0 Contact GAM 102 08. 112 Contact GAM 79 2:1 17.919 2.2 29.0079 9.8 0 Contact GAM 102 77.7 112 Contact GAM 79 :1 1.002 2.2 19.979. 0 Contact GAM 102 92.117 112 Contact GAM 79 :1.781 2.2 1.9917.890 0 Contact GAM 102 88.89 112 Contact GAM 79 :1.27 2.2.098 1.72 0 Contact GAM 102 71.900 112 Contact GAM 79 :1 2.878 2.2.7 1.822 0 Contact GAM 102 1.02 112 Contact GAM 79 1:1.79 22.2 9.220 22.01 8 Contact GAM 9 12.7900 10 Contact GAM 1 1.:1 2.28 22.2.18 19.7777 8 Contact GAM 9 8.222 10 Contact GAM 1 2:1 1.8122 22.2 29.18 97.871 8 Contact GAM 9 80.97 10 Contact GAM 1 :1 12.92 22.2 19.7 7.19 8 Contact GAM 9 19.900 10 Contact GAM 1 :1.0 22.2 1.087.88 8 Contact GAM 9 89.188 10 Contact GAM 1 :1.080 22.2.90 17.290 8 Contact GAM 9 72.0 10 Contact GAM 1 :1 2.71 22.2.828 1.11 8 Contact GAM 9 1.921 10 Contact GAM 1 1:1 2.1978 22.9.10. 28.08 9. Contact GAM 9 1299.00 108.9 Contact GAM 1.:1 2.0089 22.9 8.9809. 19.1208 9. Contact GAM 9.11 108.9 Contact GAM 2:1 18.12 22.9 0.8882. 102.82 9. Contact GAM 9 9.100 108.9 Contact GAM :1 1.20 22.9 20.. 9.27 9. Contact GAM 9 17.000 108.9 Contact GAM :1.90 22.9 1.18..18 9. Contact GAM 9 9.9 108.9 Contact GAM :1. 22.9.710. 18.99 9. Contact GAM 9 7.988 108.9 Contact GAM :1 2.909 22.9.87. 1.99 9. Contact GAM 9.9 108.9 Contact GAM 1:1 9.00 2.0 181.878 0 Contact GAM 97 1221.000 10 Contact GAM 0 1.:1 17.877 2 2.812 88.1 0 Contact GAM 97 0.9 10 Contact GAM 0 2:1 1.090 2 21.0089 7.2 0 Contact GAM 97 28.770 10 Contact GAM 0 :1 11.119 2 1.28 0.9282 0 Contact GAM 97 12.9 10 Contact GAM 0 :1 2.8 2 11.92 2.711 0 Contact GAM 97 8.108 10 Contact GAM 0 :1 2.87 2.92 9.890 0 Contact GAM 97 8.280 10 Contact GAM 0 :1 2.78 2.781 9.0921 0 Contact GAM 97 2.08 10 Contact GAM 0 72

High Performance: VC Series LL size and 0 0 0 090 120 10 10 200 S = 0% per hour with ambient temperature of -10 to +0 degrees C Ratios Available 1:1 1,2,,:1 1, 1., 2, :1 1, 1., 2,,,, :1 Nominal Torque (T 2n ) Max Acceleration Torque (T 2B ) Emergency Torque (T 2NOT ) Vent Filter may be required (n 1 ) Max Input Speed (n 1max ) Nm (lb-in) Nm (lb-in) Nm (lb-in) 1:1. (0) 9 (80) 8 (71) 2 (221) 0 () 120 (102) 180 (19) 0 (098) 1.:1 - - 10 (89) 2 (221) 1 (0) 11 (1000) 18 (17) 0 (2921) 2:1-7 (2) 10 (89) 2 (221) (7) 110 (97) 18 (17) 20 (282) :1 -. (9) 8 (71) 2 (20) 8 (1) 110 (97) 190 (182) 20 (717) :1 -. (0) - 2 (20) 0 (1) 10 (929) 180 (19) 0 (098) :1 - - - 2 (20) 0 (1) 100 (88) 180 (19) 00 (2) :1 - - - 2 (20) (78) 9 (81) 10 (111) 210 (189) 1:1. (9) 11 (97) 1 (1) 0 () 70 (20) 180 (19) 0 (098) 700 (19) 1.:1 - - 17 (10) 7 (27) 10 (929) 200 (1770) 0 (2921) 90 (107) 2:1-8. (7) 17 (10) (19) 98 (87) 190 (182) 20 (282) 00 (11) :1 -. (8) 1 (1) (19) 9 (81) 177 (17) 280 (278) 0 (7) :1 -. (9) - (19) 87 (770) 12 (1) 270 (290) 0 (88) :1 - - - (19) 92 (81) 1 (12) 270 (290) 0 (70) :1 - - - 1 (27) 71 (28) 122 (1080) 200 (197) 1 (2788) 1:1 8 (71) 1 (12) 2 (20) 0 () 10 (128) 20 (201) 80 (28) 980 (87) 1.:1 - - 2 (221) 0 () 10 (129) 280 (278) 00 (2) 80 (72) 2:1-12. (111) 2 (221) 0 (1) 10 (129) 280 (278) 0 (88) 800 (7081) :1-10 (89) 20 (177) 0 (1) 10 (129) 20 (201) 00 (0) 80 (72) :1-8 (71) - 0 (1) 10 (129) 20 (201) 00 (0) 800 (7081) :1 - - - 0 () 120 (102) 220 (197) 80 () 800 (7081) :1 - - - (98) 110 (97) 200 (197) 0 (098) 2 (2) RPM all ratios - - - >2200 >1700 >100 >1200 >900 RPM - - - if housing temperature > 0 degrees C (also depends on duty cycle, ambient temperature, and mounting orientation) 1:1 000 000 00 200 200 2100 1800 100 1.:1 - - 000 800 00 000 200 220 2:1-000 000 000 800 200 200 000 :1-000 000 000 000 000 00 000 :1-000 - 000 000 000 000 00 :1 - - - 000 000 000 000 000 :1 - - - 000 000 000 000 000 Standard Backlash (j) arcmin all ratios <1 <1 <20 <20 <20 <20 <20 <20 Reduced Backlash (j) Allowable Radial Load (F rad ) Allowable Axial Load (F axial ) arcmin N (lbs) N (lbs) 1:1-2:1 <8 <8 < < < < < < :1 - :1 - <8 <10 <10 <10 <10 <10 <10 nominal load @100 rpm output Contact GAM 70 (19) 120 (281) 2000 (0) 000 (7) 00 (119) 8000 (1800) Contact GAM 7 (8) 2 (11) 1000 (22) 100 (8) 20 (9) 000 (900) (m) ) kg (lbs) - Contact GAM 2 (). (10) 8 (18) 1 (29) 22 (9) 8. (8) Efficiency at Load 9-98% Service Life / Housing Material 10,000 hours / Aluminum 1,000 hours / Cast Iron Lubrication Synthetic Oil Synthetic Oil 7 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

VC Series & LL Series LL size and 0 0 0 090 120 10 10 200 Thermal Limit 0. kw 0.0 kw Housing Temperature <= 90 degrees C Continuous Torque (T n ) Ratio Input Speed Nm (lb-in) 000 rpm - -. (2) 8 (71) - - - - 1:1 000 rpm 1.11 (9.8) 1.9 (1.9).8 (2) 11 (97) 18 (19) - - - 200 rpm 1.9 (12.) 2.9 (21.1) (1) 1 (12) 2 (20) 7 (27) (9) - 100 rpm 2.2 (19.7).8 (.8) 8 (71) 17 (10) 7 (27) 0 (1) 90 (797) 17 (190) 000 rpm - -. (8) 12 (10) 21 (18) (01) - - 1.:1 000 rpm - - 7.2 () 17 (10) 28 (28) (98) 8 (02) - 200 rpm - - 9 (80) 21 (18) (10) (9) 8 (72) 17 (101) 100 rpm - - 10 (89) 2 (221) (9) 90 (797) 1 (120) 2 (2089) 000 rpm - - 7.2 () 17 (10) 28 (28) (98) - - 2:1 000 rpm -.81 (.7) 9. (8) 2 (20) 7 (27) 0 (1) 90 (797) 17 (190) 200 rpm -.77 (2) 10 (89) 2 (212) (07) 7 () 11 (1000) 19 (17) 100 rpm - 7 (2) 10 (89) 27 (29) 7 () 120 (102) 181 (102) 1 (2779) 000 rpm - - 7.2 () 21 (18) 2 (72) 8 (02) 102 (90) 177 (17) :1 000 rpm -. (9) 9. (8) 2 (20) (9) 90 (797) 1 (120) 2 (2080) 200 rpm -. (9) 10 (89) 2 (212) (8) 11 (1000) 170 (10) 29 (202) 100 rpm -. (9) 10 (89) 27 (29) 7 () 10 (111) 20 (20) 72 (178) 000 rpm - - - 21 (18) 2 (0) 8 (72) 1 (120) 2 (2080) :1 000 rpm -. (9.8) - 2 (20) 0 (1) 10 (912) 180 (19) 1 (2779) 200 rpm -. (9.8) - 2 (221) 7 (9) 111 (982) 200 (1770) 9 (78) 100 rpm -. (9.8) - 27 (29) 7 () 120 (102) 220 (197) (027) 000 rpm - - - 21 (18) 2 (0) 90 (797) 10 (11) 27 (2) :1 000 rpm - - - 2 (20) 0 (1) 100 (88) 180 (19) 00 (2) 200 rpm - - - 2 (221) (7) 10 (929) 198 (172) 0 (009) 100 rpm - - - 27 (29) 72 (7) 11 (1018) 21 (190) 80 () 000 rpm - - - 21 (18) (98) 8 (72) 11 (1018) 190 (182) :1 000 rpm - - - 2 (20) (78) 9 (81) 10 (111) 210 (189) 200 rpm - - - 2 (221) 9 (22) 102 (90) 17 (121) 22 (1991) 100 rpm - - - 27 (29) () 108 (9) 1 (128) 20 (212) 7

VC-W VC-S VC-K VC-T (dual shaft) mm (in) 0 0 90 120 10 10 200 D1 min (0.118) (0.118) (0.197) 8 (0.1) 1 (0.12) 19 (0.78) 19 (0.78) 2 (0.9) motor shaft diameter D1 max 11 (0.) 11 (0.) 1 (0.0) 20 (0.787) 28 (1.102) 8.1 (1.00) 8.1 (1.00) (1.772) D2 j output shaft diameter (0.2) 10 (0.9) 12 (0.72) 18 (0.709) 2 (0.98) 2 (1.20) (1.78) 2 (1.) output shaft key size 2 x 2 x 10 x x 18 x x 20 x x 28 8 x 7 x 10 x 8 x 10 x 8 x 0 12 x 8 x 70 D mounting bolt circle 1 29 (1.12) 9 (1.) (2.12) 7 (2.9) 100 (.97) 11 (.28) 1 (.1) 17 (.890) D f7 pilot diameter 1 22 (0.8) 2 (1.20) (1.72) 0 (2.2) 80 (.10) 90 (.) 110 (.1) 120 (.72) D f7 pilot diameter 2 (1.78) (1.772) (2.20) 89 (.0) 119 (.8) 1 (.1) 19 (.20) 199 (7.8) D shoulder diameter 10 (0.9) 1 (0.91) 17 (0.9) 0 (1.181) (1.78) 0 (1.99) 0 (1.7) (2.1) D7 H* smooth hollow diameter 1 - - 12 (0.72) 18 (0.709) 2 (0.98) 2 (1.20) (1.78) 2 (1.) D8 opened up ID - - 1 (0.12) 19 (0.78) 2 (1.02) (1.299) (1.17) (1.9) D9 H7** smooth hollow diameter 2 - - 1 (0.1) 20 (0.787) 27 (1.0) (1.9) 7 (1.7) (1.72) D10 shrink disc OD - - 8 (1.9) 0 (1.99) 0 (2.2) 80 (.10) 80 (.10) 100 (.97) D11 H7*** keyed hollow diameter (0.2) 10 (0.9) 12 (0.72) 18 (0.709) 2 (0.98) 2 (1.20) (1.78) 2 (1.) hollow shaft key size 2 x 2 x x x 8 x 7 10 x 8 10 x 8 12 x 8 housing size (1.78) (1.772) (2.9) 90 (.) 120 (.72) 10 (.12) 10 (.299) 200 (7.87) mounting bolt location 2 2 (0.98) 0 (1.181) (1.772) 70 (2.7) 100 (.97) 110 (.1) 120 (.72) 10 (.299) L output shaft to centerline 0 (1.7) 7. (2.2) 72 (2.8) 9 (.70) 122 (.80) 17 (.9) 10 (.299) 20 (7.992) L**** overall length Contact GAM 1 (.27) 18 (7.28) 20 (9.0) 2 (10.7) 29 (11.1) 2 (1.2) L shoulder thickness 0. (0.020) 2 (0.079) 2 (0.079) 2 (0.079) 2 (0.079) 2 (0.079) 2 (0.079) 2 (0.079) L output pilot height 2. (0.217) 8 (0.1) 9. (0.7) 10 (0.9) 12 (0.72) 12 (0.72) 1 (0.91) 17 (0.9) L7 output pilot height 1 1. (0.09) 2 (0.079) 2 (0.079) 2 (0.079) (0.118) (0.118) (0.118) (0.118) L8 output shaft length 1 (0.91) 2 (0.90) 2 (1.02) (1.78) (1.772) 0 (1.99) 0 (2.2) 80 (.10) L9 key length 10 (0.9) 18 (0.709) 20 (0.787) 28 (1.102) (1.17) (1.772) 0 (1.99) 70 (2.7) 0 key width 2 (0.079) (0.118) (0.17) (0.2) 8 (0.1) 10 (0.9) 10 (0.9) 12 (0.72) 1 shaft height with key.8 (0.28) 11.1 (0.7) 1. (0.1) 20. (0.807) 28 (1.102) (1.78) 8 (1.9) (1.772) 2 stub shaft length - - 17 (0.9) 2 (0.98) 27 (1.0) 2 (1.20) 2 (1.20) 7 (1.7) diameter 2 length - - 1 (0.91) 18 (0.709) 22 (0.8) 2 (0.98) 2 (0.98) (1.78) hollow shaft to centerline - - (1.811) 2 (2.1) 80 (.10) 90 (.) 10 (.0) 12 (.921) shrink disc to centerline - - (2.80) 87 (.2) 107 (.21) 122 (.80) 1 (.1) 12 (.78) hollow key width 2 (0.079) (0.118) (0.17) (0.2) 8 (0.1) 10 (0.9) 10 (0.9) 12 (0.72) 7 hollow height with keyway 7 (0.27) 11. (0.9) 1.8 (0.) 20.8 (0.819) 28. (1.11). (1.90) 8. (1.08). (1.78) 8 hollow shaft to centerline 27 (1.0). (1.7) (1.811) 2 (2.1) 80 (.10) 90 (.) 10 (.0) 12 (.921) f1 mounting holes 1 M x M x 8 M x 12 M8 x 1 M10 x 1 M10 x 20 M12 x 2 M12 x 2 mounting holes 2 M x M x 8 M x 9. M8 x 10 M10 x 12 M10 x 12 M12 x 1 M12 x 17 f shaft thread DIN 2 M M M M M10 M12 M12 M1 * Mating shaft should have j tolerance ** Mating shaft should have h tolerance *** Mating shaft should have g tolerance ****Depending on motor, length may change 7 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

Performance: Spiral Bevel Series Mounting Configuration Breather Location Shaft Hollow Recommended Coupling VC Series 0 0 0 090 120 10 10 200 bellows KG- or KM- KG-10 or KM-12 KM-12 or 20 KLC-2 or 0 KLC-0 or 12 KLC-12 or KM-170 KM-170,270 or 00 KM-270,00 or 0 elastomer EKC- EKM-8 or 1 EKC- or 2 EKC- or EKM- EKC-80 or 110 EKC-110 or EKM-200 EKM-200,00 or 00 EKM-00,00 or 700 TYPE CODES FOR VC SERIES / LL SERIES Example: VC - W - 090-002 S - [11-2AA] - 1-S1-200-E1-S111 Gearbox Series VC - Spiral Bevel Series (size-200) LL mini Spiral Bevel Series (size & ) Gearbox Style K = Keyed hollow shaft W = Single output shaft T = Dual output shaft S = Smooth hollow output shaft with shrink disc (not available in LL) Gearbox Size 0, 0, 0, 090 120, 10, 10, 200 Ratio 1, 1., 2,,,, Special Options Assigned by GAM Breather Location (if required) Maximum Input Speed Duty Cycle S1 = continuous speed S = cyclic Mounting Configuration Motor Mount Kit Assigned by GAM Backlash S = Standard Backlash R = Reduced Backlash TYPE CODES FOR V SERIES / L SERIES Example: V - 090-1:1 - C0-70-9.1- E2/S1 Gearbox Series V - Spiral Bevel L - Mini Spiral Bevel (size 0 and 0) Gearbox Size 0, 0, 0, 090, 120, 10, 10, 200, 20, 20, 0 Ratio 1, 1., 2,,,, Gearbox Model A0, B0, C0, D0, E0, E0/HSD, F0, G0, H0, J0, K0, K0/HSD, M0 Duty Cycle S1 Continuous Speed S Cyclic Breather Location If applicable Mounting Configuration 1,2,,,, Mounting Side 9 = Standard Tapped holes on housing sides 1, 2, and on output flanges sides, Input Running Speed 0-000 RPM 7