YARD CRUISER HYDRO DRIVE HZ SERIES 1 & 2

Parts Manual for YARD CRUISER HYDRO DRIVE HZ SERIES 1 & 2 MODELS HZS11BVE HZS181BVE HZS1521KVE HZS1522KVE HZS1681BVE HZS1882BVE TM HZS11BE Model shown CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- REAR...2 CASTER, FRONT WHEEL & TIRE ASSM Y.... FRONT FRAME & COVER ASSEMBLIES...- REAR FRAME ASSEMBLY...10-11 FUEL TANK & OPERATOR S SEAT...12-1 FENDER & TRANSAXLE ASSEMBLY...1-15 CLUTCH ASSEMBLY...16-1 DECK LIFT HANDLE ASSEMBLIES...18-21 BRAKE/CLUTCH LEVER ASSEMBLY...22-2 MOWER DECK ASSEMBLY...2-2 8 MOWER DECK ASSEMBLY...28-1 2 MOWER DECK ASSEMBLY...2-5 8 MOWER DECK ASSEMBLY...6- SPINDLE ASSEMBLY...0 8 SPINDLE ASSEMBLY...1 2 SPINDLE ASSEMBLY...2 8 SPINDLE ASSEMBLY... ENGINE COMPONENTS...-5 DECALS...6- ELECTRICAL COMPONENTS...8- WIRING SCHEMATICS...50-51 COPYRIGHT 2002 SNAPPER INC. ALL RIGHTS RESERVED (Rev. 5, 0/0/02) MANUAL No. 0610

WHEELS - REAR 1 ASSEMBLY 8 2A, 2B, 2C, 2D A, B, C 5 6 1 5-686 ASSEMBLY, Rear Tire & Rim (2) (Includes Items 2C, B, & ) (2" Series 2) Multi-Trac -- 5-681 ASSEMBLY, Rear Tire & Rim (2) (Includes Items 2A, A, & ) (" Models) Multi-Trac -- 5-682 ASSEMBLY, Rear Tire & Rim (2) (Incl. Items 2B, B, & ) (8 & 2, Series 0 & 1) Multi-Trac -- 5- ASSEMBLY, Right Hand Tire & Rim (Includes Items 2D, C & ) (8 Models, Series 2) -- 5-8000 ASSEMBLY, Left Hand Tire & Rim (Includes Items 2D, C & ) (8 Models, Series 2) 2A -621 TIRE, 18 x.00-8 ( Models) Multi-Trac Tread 2B -622 TIRE, 18 x 8.50-8 Multi-Trac Tread (8 & 2 Models) (Series 0 & 1) 2C -6 TIRE, 18 x.50-8 (2 Models, Series 2) 2D -62 TIRE, 18 x 8 All Terrain Tread (8 Models, Series 2) A -52 RIM, 18 x.00 ( Models) B -5562 RIM, 18 x 8.50 (8 & 2 Models, Series 0, 1 & 2) C 5-8156 RIM, 18 x 8 (8 Models, Series 2) -2028 BUSHING, Machine (2) 5-16 RING, Retaining, External 1 (2) 6 1-1022 CAP, Hub (2) 1-22 STEM, Valve 8-20 KEY, M6 x 8 Square (2) NOTE: Kit #6-06 is made up of tire assemblies 5- and 5-8000 (one each) MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 2

CASTER, FRONT WHEEL & TIRE ASSEMBLY 1 ASSEMBLY 8 2 5 6 10 1 1 11 1 12 1 5-80 ASSEMBLY, Front Wheel & Tire (Complete) (2) (Includes Items 2 thru 6) 2-5618 TIRE, 11 x.00-5, Smooth Tread 2-122 RIM, Caster Wheel 1-2 FITTING, Lube 5 1-22 VALVE, Air (Snap-in) 6 1-20 RING, 1 External Retaining (2) 2-556 BUSHING, Caster (2) 8 1-86 FITTING, Lube, /8 (2) 2-11 BEARING, Flanged 1 x 2 x 5/8 (2) 10-18 CASTER, Pivot Yoke (2) 11-08 NUT, /16-1 Hex Center Lock (2) 12-55 TUBE, 5/8 O.D. x 1 Ga. x.51 (2) 1-558 BEARING, Ball 5/8 x 1-/8 () 1-12 SCREW, /16-1 x 6 Hex Head Cap, Grade 5 (2) YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

FRONT FRAME & COVER ASSEMBLY (Series 1) 5 25 6 2 10 2 12 22 22 18 8 2 16 1 11 15 1 2 22 1 1 1 20 21 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2

FRONT FRAME & COVER ASSEMBLY (Series 1) 1-515 FOOT REST 2-01 SCREW, #10-2 x 1/2 Pan Head Phillips Machine (16) 2-1 SCREW, 1/-20 x / Thumb () -180 WASHER, 1/ Internal/External Lock () 5-62 MAT, Floor 6-268 HOLDER, Beverage -5258 RAIL, Front Cover (Right Hand) 8-525 RAIL, Front Cover (Left Hand) 2-25 U-NUT, 1/-20 () 10-522 PLATE, End (Right Hand) 11-52 PLATE, End (Left Hand) 12-525 PLATE, Floor 1-02 SCREW, /8-16 x 1 Hex Washer Face, Self-Tapping (2) 1-051 WASHER, /8 Flat (2) 15-55 SPACER, Front Frame Pivot (2) 16-5 PLATE, Front Frame Pivot 1-5255 FRAME, Front 18-50 PAD, Foot Rest 1-115 WASHER, 5/16 Split Lock (2) 20-1058 BOLT, 5/16-18 x -/ (2) 21-221 BUMPER, Front 22-1056 NUT, #10-2 Clip (16) 2-108 SCREW, 1/-20 x /8 Self-Tapping (6) 2-1601 NUT, 5/16-18 (2) 25-1818 PAD, Floor Board Support () YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 5

2 FRONT FRAME & COVER ASSEMBLY (Series 2) 1 12 1 1 12 10 11 8 6 15 5 15 15 1 2 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 6

2 FRONT FRAME & COVER ASSEMBLY (Series 2) 1-01 FRAME, Front 2-221 BUMPER, Front -1058 BOLT, 5/16-18 x -/ (2) -115 WASHER, 5/16 Split Lock (2) 5-100 NUT, 5/16-18 Hex Flange Lock, Grade 5 (2) 6 2-8260 FASTENER, U Type 1/ -20 (2) -02 SCREW, /8-16 x 1 Hex Washer Face, Self-Tap (2) 8-051 WASHER, /8 Flat (2) -55 SPACER, Front Frame Pivot (2) 10-5 PLATE, Front Frame Pivot 11-685 FLOOR, Front Frame 12-180 WASHER, 1/ Internal/External Lock () 1 2-1 KNOB () 1-211 FLOOR MAT 15-1818 PAD, Floor Pan () YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

8 FRONT FRAME & COVER ASSEMBLY (Series 2) 1 1 12 1 11 16 10 26 1 8 2 22 6 21 1 5 15 20 25 15 15 2 22 21 18 1 2 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 8

8 FRONT FRAME & COVER ASSEMBLY (Series 2) 1-01 FRAME, Front 2-221 BUMPER, Front -1058 BOLT, 5/16-18 x -/ (2) -115 WASHER, 5/16 Split Lock (2) 5-100 NUT, 5/16-18 Hex Flange Lock, Grade 5 (2) 6 2-8260 FASTENER, U Type 1/ -20 (2) -02 SCREW, /8-16 x 1 Hex Washer Face, Self-Tap (2) 8-051 WASHER, /8 Flat (2) -55 SPACER, Front Frame Pivot (2) 10-5 PLATE, Front Frame Pivot 11-685 FLOOR, Front Frame 12-180 WASHER, 1/ Internal/External Lock () 1 2-1 KNOB () 1-211 FLOOR MAT 15-1818 PAD, Floor Pan () 16-060 WELDMENT, Rear Lift 1-0 BRACKET, Saddle 18-06 ROD, Timing 1-0551 BOLT, 1/-20 x 5/8 Short Square Neck Carriage () 20-058 NUT, 1/-20 Flange Lock () 21-066 WASHER, 1/2 Flat (2) 22-001 PIN, 1/8 x 1 Cotter (2) 2 5-800 WELDMENT, Front Lift 2 2-21 ROD, Deck Support 25 1-8 RING,.8 External Retaining 26 5-80 SPRING, Deck Assist 2 2-8260 FASTENER, U Type (2) YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

REAR FRAME ASSEMBLY 8 6 11 1 12 1 1 2 10 1 16 1 15 1 0 5 21 2 2 28 1 18 22 2 25 2 20 2 6 5 26 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 10

REAR FRAME ASSEMBLY 1-182 FRAME, Rear 2-568 CUSHION, Seat Support (2) -56 SPRING, Seat Support (2) -0 SCREW, 1/-20 x 5/8 Pan Head, Self-Tapping (6) 5-000 BOLT, 5/16-18 x 1/2 Carriage, Grade 5 () 6-5 HINGE, Seat -100 NUT, 5/16-18 Hex Flange Lock, Grade 5 () 8-58 BUMPER, Rear -1506 SCREW, 5/16-18 x 1-1/2 Hex Washer Head, Self-Tapping () 10-158 WASHER, 1/2 Flat (2) 11-116 NUT, 1/2-1 Hex, Grade B (2) 12-1 BRACKET, Battery -- 5-828 BRACKET, Battery (8 Deck Only) 1 1-21 BUSHING (2) 1-028 SCREW, 5/16-2 x 1 Hex Head Cap () 15 1-11 RETAINER, 5/16 Bolt () 16-115 WASHER, 5/16 Split Lock () 1-12 NUT, 5/16-2 Hex, Grade 5 () 18 1-10 GROMMET (2) 1 2-6 CABLE, Brake/Clutch 20-10 BOLT, 1/2-1 x 5/8 Thread,.5 x.88 Shoulder 21-12 IDLER ARM, Primary 22 5-862 SPRING, Clutch/Brake (5 long) 2-151 WASHER, /8 Flat 2-1585 NUT, /8-16 Hex Center Lock, Grade 5 25 2- PULLEY, Idler.0 Dia. 26-125 BOLT, 1/2-1 x 5/8 Thread,.5 x.2 Shoulder 2 - BRACKET, Hydraulic Idler 28-5168 SPRING, Drive Idler (/ x 10 long) 2 2-168 SCREW, 5/16-18 x 1 Hex Head Cap, Grade 5 0-85 CABLE, Hydro Release Valve 1-120 SCREW, #10-2 x 5/8 Hex Washer Head, Machine (2) 2 1-85 IDLER,.12 Flat -06 NUT, #10-2 Hex Nyloc (2) 2-2886 SWITCH, Seat 5-155 NUT, 5/16-18 Hex Center Lock 6-8 GUIDE, Belt 5-861 COVER, Spring YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 11

FUEL TANK & OPERATOR S SEAT 21 25 8 22 2 1 2 12 20 1 18 8 12 12 15 11 10 0 16 1 1 2 1 2 26 6 6 5 2 1 5 28 NOTE: MOUNT ITEM 1 TO BOTTOM OF SEAT, IN LINE WITH BATTERY. 2 1 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 12

FUEL TANK & OPERATOR S SEAT 1-58 BRACKET, Right Hand Tank Support 2-26 BRACKET, Joystick -55 PIVOT, Joystick Control -266 HANDLE, Joystick Control 5-1800 BOLT, 5/16-18 x / Shoulder () 6 2-656 LEVER, Shift Handle -08 PIN, /16 x / Roll 8-6561 TETHER, Seat 5-6 ASSEMBLY, R.H. Fender (with steel support) (Series 1) -- 5-825 ASSEMBLY, R.H. Fender (with steel support) (Series 2) 10-56 BOOT, Joystick, Rubber 11-55 BRACKET, Joystick/Key 12-0 SCREW, 1/ x 5/8 Pan Head Self-Tapping () 1-581 BRACKET, Left Hand Tank Support 1-582 BRACKET, Brake/Clutch Detent 15-062 SCREW, 1/-20 x 5/8 Self-Tapping (6) 16-62 SPEED PLATE 1 5-5 ASSEMBLY, L.H. Fender (with steel support) (Series 1) -- 5-825 ASSEMBLY, L.H. Fender (with steel support) (Series 2) 18-26 GUARD, Throttle Control 1-66 BUMPER, Battery 20-1681 BOLT, 5/16-18 x 1 Hex Flange Lock () 21-8 SEAT (All Models) 22-180 WASHER, 1/ Internal/External Tooth (2) 2-520 SCREW, 1/-20 x 1-1/2 Thumb (2) 2-58 ASSEMBLY, Fuel Tank (Includes item 25) 25-11 CAP, Fuel Tank (w/gage & Screw Vent) 26-15 COTTER-PIN, /8 Self Locking 2-126 WASHER, 11/2 x 11/16 Flat 28-1 CYLINDER, Joystick Control 2-6 BRACKET, Joystick Control 0-161 SCREW, #10-2 x 1/2 Machine (8) 1-1020 PUSH-NUT, 1/ (2) 2-02 PIN, Joystick -1511 NUT, 5/16-18 Hex, Grade 5-115 WASHER, 21/6 Split Lock 5 1-66 BOLT, 5/16-18 Shoulder 6-525 FENDER, R.H. Steel (Radius) (Series 1) -- -611 FENDER, R.H. Steel (Radius) (Series 2) -526 FENDER, L.H. Steel (Radius) (Series 1) -- -610 FENDER, L.H. Steel (Radius) (Series 2) 8-1056 U-CLIP, #10-2 (8) -855 ARM REST, (2) (Series 2) YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 1

FENDER & TRANSAXLE ASSEMBLY 6 1 0 6 0 2 1 2 2 8 8 10 0 6 2 26 5 28 25 2 11 1 1 21 20 1 1 1 20 12 1 22 16 L. H. FENDER SHOWN 18 1 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 1

FENDER & TRANSAXLE ASSEMBLY ITEM PART NO. DESCRIPTION 1 2-128 TRANSAXLE, Hydro L.H. (Eaton Model X8-005) 2 2-12 TRANSAXLE, Hydro w/o Manifold R.H. (Eaton Model X8-011) 1-58 KEY, #605 Woodruff (2) -05 SCREW, 1/-20 x 1/2 Self-Tapping (8) 5-5 FAN, 6 O.D., 10 Blade (2) 6-56 PULLEY, Hydro Input (2) -11 RING, Retaining (2) 8-182 V-BELT, Hydro Drive -15 BRACKET, Fender Support (2) 10-16 BRACKET, Hydro Support 11-062 SCREW, 1/-20 Hex Washer Head, Self-Tapping () 12-0 FENDER, L.H, 1-08 FENDER, R.H. (Not Shown) 1-1 BRACKET, Deck Support L.H. 15-52 BRACKET, Deck Support R.H. (Not Shown) 16-1000 SCREW, 5/16-18 x /8 Pan Head, Self-Tapping () 1-068 SCREW, 5/16-18 x / Hex Washer Head, Self-Tapping (26) 18-0815 SCREW, /8-16 x / Hex Washer Head, Self-Tapping (8) 1-22 BRACKET, Hydro Control Cable (2) 20 2-1 ROD END, #10-2 w/stud () 21-1801 NUT, #10-2 Hex Center Lock () 22 2-10 CABLE, L.H. Hydraulic Control (5.5 long) 2 2-16 CABLE, R.H. Hydraulic Control (5.0 long) (Not Shown) 2-8 BRACKET, Hydro Release Cable 25-061 SCREW, 5/16-18 x 5/8 Hex Washer Head, Self-Tapping (2) 26-8 BRACKET, Hydro Release Actuator (2) 2 1-211 BUSHING, (2) 28-181 SCREW, 5/16-18 x 1 Hex Washer Head, Self-Tapping (2) 2-1 ARM, Brake (2) 0-1165 BOLT, 1/-28 x 5/8 Hex Head, Grade 8 () 1-06 WASHER, 1/ Belleville () 2-1 ARM, Brake (2) -151 WASHER, /8 Flat (6) 2-28 ROD, R.H. Brake 5 2-12 ROD, L.H. Brake (Not Shown) 6 2-8 COTTER-PIN, 1/16 x 1.2 Self-Locking () 2-586 LINK, Swivel Brake (2) 8 2-801 SPRING, Brake Compression (2) -12 NUT, /8-16 Nyloc (2) 0-85 CABLE, Hydro Release Valve 1-6 DECAL, Hydro Reservoir (2) NOTE: MOBIL 1 DTE 26 OIL FOR HYDROTRANSAXLE YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 15

CLUTCH ASSEMBLY 5 2 6 1 8 22 21 16 1A 18 1 1 1B 12 20 11 10 2 1 15 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 16

CLUTCH ASSEMBLY 1-15 SCREW, /16-20 x 8 Hex Head Cap 2 2-18 WASHER, /16 x 1 O.D. Flat (2) 2-16 BEARING, 605 w/snap-ring (2) -100 NUT, 5/16-18, Grade 5 (6) 5 2-11 V-BELT, 5L Cogged 50.10 effective length -- -6 V-BELT, 5L Cogged. effective length (8 Model) 6 2-10 PULLEY, Jackshaft -- -682 PULLEY, Jackstaff (8 Model) -182 SETSCREW, 1/-20 x 1/2 w/patch (2) 8 6-26 SUPPORT, Jackshaft -1508 BOLT, 5/16-18 x / Carriage, Grade 5 (6) 10 2-15 JACKSHAFT 11 1-250 KEY, 1/ x 1 Square (2) 12-52 BRACKET, Anti-Rotate 1A 2-22 CLUTCH, Electric (Ogura) (12 V, OHM) 1B 5-0 CLUTCH, Electric (Warner) (12V,. AMP,.5 OHM) 1-101 WASHER, /16 Split Lock 15-060 NUT, /16-20 Hex, Grade B 16-152 SCREW, 5/16-18 x 1-1/, Hex Head Cap, Grade 5 1 2-0 BUMPER, Electric Clutch 18-8 WASHER, Rectangular Steel 1-115 WASHER, 5/16 Split Lock 20-1511 NUT, 5/16-18, Grade 5 21 1-2652 CLIP, Wire, /16 22 2-1 WASHER (Ogura Clutch) (.125 thick) -- -581 WASHER (Warner Clutch) (.50 thick) YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 1

DECK LIFT HANDLE ASSEMBLY (Except 8 Model) 6 1 1 2 1 15 18 11 8 16 10 1 10 PIVOT BRACKET (PART OF FRONT FRAME WELDMENT) 1 15 6 12 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 18

DECK LIFT HANDLE ASSEMBLY (Except 8 Model) 1-12 HANDLE, Deck Lift 2-125 BRACKET, Pivot Support -6220 LEVER, Deck Lift/Handle Release 2-00 WASHER, Slipper 5-68 SPRING, Torsion (Deck Position) 6-002 SCREW, 1/-20 x 5/8 Hex head Cap, Grade 5 (2) -058 NUT, 1/-20 Hex Flange Lock () 8-58 BAR, Deck Lift -151 WASHER, /8 Flat () 10-150 HAIRPIN, /2 x 1-1/2 (2) 11-62 PIN, /8 x /8 Large Head Clevis 12-126 PLATE, Detent 1-118 SCREW, 5/16-18 x / Hex Cap, Grade 5 1-100 NUT, 5/16-18 Hex Flange Lock, Grade 5 15-65 DECAL, Deck Position 16-188 PIN, /8 x 1/2 Expanded Head Clevis 1-61 PIN, /8 x 1-5/8 Clevis 18-60 SPACER 1-15 PIN, /2" x /" Cotter YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 1

8 DECK LIFT HANDLE ASSEMBLY 6 1 1 20 1 5 18 2 11 21 22 22 8 16 1 1 1 2 10 12 6 PIVOT BRACKET (PART OF FRONT FRAME WELDMENT) 15 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 20

8 DECK LIFT HANDLE ASSEMBLY 1-12 HANDLE, Deck Lift 2-125 BRACKET, Pivot Support 5-800 WELDMENT, Deck Lift Handle 2-00 WASHER, Slipper 5-68 SPRING, Torsion (Deck Position) 6-002 SCREW, 1/-20 x 5/8 Hex Head Cap, Grade 5 (2) -058 NUT, 1/-20 Hex Flange Lock (2) 8-066 LINK, Connector -151 WASHER, /8 Flat (5) 10-150 HAIRPIN, /2 x 1-1/2 (2) 11-066 WASHER, 1/2 SAE Flat (2) 12 5-80 DETENT, Lift Handle 1-118 SCREW, 5/16-18 x / Hex Cap, Grade 5 1-100 NUT, 5/16-18 Hex Flange Lock, Grade 5 15-65 DECAL, Deck Position 16-188 PIN, /8 x 1/2 Expanded Head Clevis 1-61 PIN, /8 x 1-5/8 Clevis (1) 18-60 SPACER 1-15 PIN, /2" x /" Cotter (2) 20-06 PLATE, Connector Arm 21-18 PIN, 1/2 x.25 Clevis (2) 22-001 PIN, 1/8 x 1 Clevis (2) 2 1-6 PIN, Clevis, /8 x 2.00 YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 21

BRAKE/CLUTCH LEVER ASSEMBLY 2 1 8 6 5 11 10 12 12 1 12 1 11 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 22

BRAKE/CLUTCH LEVER ASSEMBLY 1 2-8 GRIP, 5/16 x 2-1/2 Vinyl 2-55 GRIP, Brake/Clutch Handle 5-852 ROD, Park Brake -56 SPRING, Brake/Clutch Release 5-585 ARM, Brake/Clutch Lever 6-58 PIVOT, Brake/Clutch Lever -12 SCREW, 1/-20 x /8 Slotted Hex Washer Head, Self-Tapping 8 5-851 TUBE, Brake/Clutch Lever 1-06 BUSHING, Nylon 10 2-20 ROD, Brake/Clutch 11 5-21 PIVOT, Foot Shaft Assembly (2) 12-081 ROLL-PIN, /16 x 1-1/2 () 1 2-208 ARM, Brake/Clutch 1-261 ARM, Brake/Clutch YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 2

DECK ASSEMBLY (page 1 of ) 2 28 2 5 1 1 25 2 1 15 6 1 16 1 6 0 1 5 8 6 5 1 2 16 1 0 1 0 6 26 2 2 0 22 21 20 1 18 8 NOTE: The heads of indicated fasteners are located underneath the deck. 1 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 2

MOWER DECK ASSEMBLY (page 2 of ) 1 0 8 10 10 28 8 11 12 10 1 2 1 2 28 10 -- 5-01 ASSEMBLY, Deck (complete) (includes items 1-) 1 6-156 DECK, Replacement Structure 2-866 BRACKET, Deck Lift Slotted (2) -86 BRACKET, Deck Lift (2) -50 BRACKET, Anti-Scalp Adj. Front 5-51 BRKT., Anti-Scalp Adj. Side (2) 6-65 BAR, Weight Rear -0 BOLT, /8-16 x 1 Carriage (2) 8-056 NUT, /8-16 Hex Center Lock (6) -2586 ARM, Front Lift (weldment) 10 1-05 WASHER, / () 11 1-5 ECCENTRIC, Leveling (/8-2 thread) 12-00 WASHER, /8 Internal Tooth Lock 1-815 ARM, Front Lift 1-016 SCREW, /8-2 x 1-1/ Hex Head Cap 15-8018 BRACE, Spindle 16-1588 BOLT, /8-16 x / Hex Flange Lock, Grade 5 () 1-061 NUT, /8-16 Hex Flange Lock () 18-168 BLADE, High Lift 1-02 SCREW, 1/2-20 x 1 Hex Head Cap, Grade 5 (2) 20-050 WASHER, 1/2 Internal Tooth Lock (2) 21-055 NUT, 1/2-20 Hex Jam (2) 22 5-21 ASSEMBLY, Spindle (see pg.0) 2 1-260 RING, 2 Tolerance 2 1-00 RING, 2 Retaining (2) 25-258 ARM, Idler (weldment) 26 1-0 WASHER, Spindle 2 2-6558 PULLEY, Spindle O.D. 28-2028 WASHER, 25/2 Flat () 2-6 NUT, /-16 Hex Jam, Grade 8 0-055 BOLT, 5/16-18 x / Hex Flange Lock (8) 1-0585 NUT, 5/16-18 Hex Fl. Lock (1) 2-2585 ARM, Rear Lift (weldment) -000 BOLT, 5/16-18 x 1-1/2 Hex Flange Lock, Grade 5 2-8620 SPACER, 11/2 5-106 NUT, 5/16-18 Hex Lock 6-000 BOLT, 5/16-18 x 1/2 Short Neck Carriage (6) -55 ROD, Cutting Deck Timing 8 2-586 SWIVEL, Brake Link PM 2-1815 SPACER, 25/6 0-0122 WASHER, /8 1 1-621 HAIRPIN, #1 2 2-21 ROD, Deck Support 1-8 RING, /16 Snap NOTE: 6-156 is a painted deck with decals 2-21, 2-681 and -620. YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 25

MOWER DECK ASSEMBLY (page of ) 52 5 51 8 55 60 50 5 58 56 5 62 6 5 62 5 5 61 58 6 68 6 6 5 6 65 66 2 6 5 6 1 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 26

MOWER DECK ASSEMBLY (page of ) -152 SCREW, /8-2 X / Hex Head Cap, Grade 5 () 5 1-522 SPACER, Long () 6 1-10 WHEEL, Gage () 5-2555 ASSEMBLY, 28 & Discharge Chute (includes 8 thru 5) 8 1-61 SPRING, Hinge 2-62 CHUTE, Discharge 50 2-62 ROD, Chute 51 2-68 WASHER, Palnut (for 1/ rod) 52 2-681 DECAL, CPSC 5-80 HINGE, Plastic Side Chute 5-1811 BOLT, 5/16-18 x 5/8 Hex Flange Lock, Grade 5 () 55-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 () 56 2-1 IDLER, Outside Diameter Flat 5-151 WASHER, 11/2 Flat () 58-1585 NUT, /8-16 Hex Center Lock 5-56 SPRING, External 60-58 V-BELT, HA Section, 55.2 Effective Length 61 2-8021 COVER, Chain (2) 62-150 HAIRPIN, /2 x 1-1/2 () 6 2-828 ADJUSTER, Chain (2) 6 2-8200 SWIVEL, Adjustable (2) 65-1508 BOLT, 5/16-18 x / Short Neck Carriage, Grade 5 66-126 WASHER, 11/2 Flat 6-02 NUT, 5/16-18 Wing 68-1528 WASHER, /8 Flat 6-1600 NUT, /8-2 Hex Center Lock () 0 1-852 DECAL, Caution 1 1-6 DECAL, Caution 2 2-21 DECAL, Hi-Vac YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 2

8 MOWER DECK ASSEMBLY (page 1 of ) 2 12 11 5 1 1 22 2 22 1 20 1 0 2 26 6 0 16 0 1 0 1 2 0 21 1 18 1 0 2 1 0 1 15 0 1 2 1 NOTE: The heads of indicated fasteners are located underneath the deck. 1 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 28

8 8 8 MOWER DECK ASSEMBLY (page 2 of ) 8 52 2 0 2 10 5 6 8 25 8 8 28 1 6-15 DECK, Painted Shell w/decals 2 5-51 ASSEMBLY, Spindle (see page 1 for breakdown) (2) 1-5 ECCENTRIC, Leveling (/8-2) -815 LIFT ARM, Front 5-00 WASHER, /8 Internal Tooth Lk. 6-016 SCREW, /8-2 x 1-1/ Hex Head Cap, Grade 5-2586 LIFT ARM, Front (weldment) 8 1-05 WASHER, / x1-1/8 Flat () 2-21 PULLEY, -1/2 O. D., A/B Groove (2) 10-55 ROD, Cutter Deck Timing(/8-16) 11 5-80 ASS Y, Idler Arm (incl. 12-1) 12 5-8 WELDMENT, Idler Arm 1 1-1016 BUSHING, 1/2 Nylon (2) 1 1-86 LUBE FITTING, /16 Press Fit 15-56 BRACKET, Gage Wheel 16-81 BRACKET, Left Hand Wheel 1-861 BRK T, 8 Deck Lift, LH Front 18-86 BRK T, 8 Deck Lift, RH Front 1-066 SCREW, 5/16-18 x 1 Hex Head Cap, Grade 5 (6) 20-5566 BRK T, Left Hand Rear Lift Arm 21-155 NUT, 5/16-18 Hex Center Lock Grade 5 (2) 22-061 NUT, /8-16 Hex Flange Lock () 2-1006 NUT, 5/8-18 Hex Nyloc (2) 2-5 BRACKET, Gage Wheel 25-2585 TIMING ARM, Rear (weldment) 26-26 STUD, Idler (5/16-2 thread) 2-68 BRACKET, Stationary Idler 28 2-586 SWIVEL, Brake Link 2 1-621 HAIR PIN, #1 0-0585 NUT, 5/16-18 Hex Flange Lock, Grade 5 (1) 1-1026 BOLT, 5/16-18 x 5/8 Short Neck Carriage, Grade 5 (1) 2-056 NUT, /8-16 Hex Center Lock, Grade 5 1-1201 NUT, 5/16-2 Hex Center Lock -15 BOLT, /8-16 x / Short Neck Carriage, Grade 5 () 5-158 WASHER, 1/2 x 1-1/16 Flat () 6-1082 COTTER-PIN, /2 x / -058 BOLT, 5/16-18 x 1-1/2 Short Neck Carriage, Grade 5 8-2028 WASHER, / x 1-1/2 Flat (2) 2-8620 SPACER,.0 I. D. x.60 O. D. x.10 Thick 0 2-1815 SPACER,.1 I. D. x.520 O. D. x.51 Thick NOTE: 5-128, 8 Deck Assembly includes items 1 thru 0 as well as items, 5 & 6. YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 2

8 MOWER DECK ASSEMBLY (page of ) 5 6 52 65 55 8 5 65 60 22 62 58 52 52 56 51 50 6 0 6 58 68 21 6 5 66 6 61 6 52 5 2 52 66 2 NOTE: The heads of indicated fasteners are located underneath the deck. 5 66 52 2 NOTE: Item 5 mounts Beneath Item 12. MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 0

8 MOWER DECK ASSEMBLY (page of ) 2 2-6122 WHEEL, x 1-1/2 Offset () -1526 SHOULDER BOLT, /8-2 () 2-681 DECAL, CPSC- Heavy Adhesive 5 2-21 ROD, Deck Support 6 1-8 RING,.8 External Retaining 2-08 V-BELT, HA Section 8.8 Effective Length 8 2-8021 COVER, Chain (2) 2-828 ADJUSTER, Chain (2) 50 2-8200 SWIVEL, Adjustable (2) 51-150 HAIR PIN, /2 x 1-1/2 () 52-151 WASHER, /8 I. D. x 1/16 O. D. Flat (1) 5 2-615 DECAL, 8 Deck 5-6561 BELT GUIDE, 8/2 Decks 55-56 SPRING, Extension 56 2-52 IDLER, O. D. Flat 5-21 IDLER, -1/8 O. D. Flat 58 1-206 WASHER, Cone (2) 5 2-25 CHUTE, Discharge 60-5502 ROD, Pivot, Side Discharge 61-1508 BOLT, 5/16-18 x / Short Neck Carriage, Grade 5 62-550 ROD, Mounting, Side Discharge 6-581 SPRING, Torsion- Side Discharge 6-65 TEENUT, 5/16-18 Thread 65-1560 SCREW, /8-16 x 2-1/ Hex Head Cap, Grade 5 66-028 NUT, /8-2 Hex Center Lock, Grade 5 () 6-1585 NUT, /8-16 Hex Center Lock, Grade 5 (2) 68-18 SCREW, 5/16-18 x 5/8 Pan Head 6-620 DECAL, Chute/Deflector Warning 0-126 WASHER, 5/16 I. D. x 11/16 O. D. 1-1528 WASHER, /8 I. D. x /8 O. D. Flat YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 1

2 MOWER DECK ASSEMBLY (page 1 of ) 10 16 20 11 1 12 1 18 20 1 10 11 2 1 2 21 22 15 1 5 2 15 1 5 26 25 2 2 25 DECK 28 2 6 8 6 8 NOTE: The heads of indicated fasteners are located underneath the deck. MANUAL No. 0610 2

2 MOWER DECK ASSEMBLY (page 2 of ) 2 2 1 0 2 0 2 8 6 2 8 1 5 2 1 6-158 DECK, Painted Shell w/decals 2 5-2 ASSEMBLY, Spindle Brake (2) -1588 BOLT, /8-16 x / Hex Flange Lock, Grade 5 (1) -061 NUT, /8-16 Hex Fl. Lock (18) 5 1-0 WASHER, Spindle (2) 6 2-661 BLADE, 21 Standard Lift (2) 1-206 WASHER, Cone (5) 8-082 SCREW, /8-2 x 1-1/ Hex Head Cap, Grade 5 (2) -66 BRACE, Spindle (2) 10-0582 BOLT, /8-16 x 1 Hex Flange Lock (2) 11 5-1 ASSEMBLY, Spindle Lock (2) 12-651 IDLER, Stationary 1-2811 REINFORCEMENT, R.H. 1-2812 REINFORCEMENT, L.H. 15-0850 BOLT, /8-16 x / Short Neck Carriage, Grade 5 () 16-582 BRACKET, R.H. Front Lift 1-58 BRACKET, L.H. Front Lift 18-585 BRACKET, L.H. Rear Lift 1-6 PULLEY, 5-1/ (2) 20 6 NUT, /-16 Hex Flange Jam, Grade 8 (2) 21-082 BOLT, 1/-20 x 1-1/8, Grade 5 22 1-016 SPACER,.26 x. 2-02 NUT, 1/-20 Hex Center Lock 2-1526 SHOULDER BOLT, /8-2 x 5/8 25-158 WASHER, 1/2 I.D. x 1-1/16 O.D. Flat () 26-2650 IDLER ARM 2-0122 WASHER, /8 Flat (2) 28-028 NUT, /8-2 Hex Center Lock 2 1-21 WASHER, 1/ Flat 0-2586 LIFT ARM, Front (weldment) 1-815 LIFT ARM, Front 2 1-05 WASHER, / x 1-1/8 () 1-5 ECCENTRIC, Leveling -00 WASHER, /8 Int. Tooth Lock 5-016 SCREW, /8-2 x 1-1/ Hex Head Cap 6-55 ROD, Cutter Deck Timing -2585 LIFT ARM, Rear (weldment) 8-2028 WASHER, / I.D. x 1-1/2 O.D. Flat (2) 2-586 SWIVEL, Brake Link 0 1-621 HAIR PIN, #1 1 2-1815 SPACER, MF1200 2-056 NUT, /8-16 Hex Center Lock NOTE: 5-, 2 Deck Sub-Assembly includes items 1 thru 2 as well as items 0, &. YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

2 MOWER DECK ASSEMBLY (page of ) 51 66 68 65 66 2 65 0 61 6 1 62 5 56 6 5 61 5 60 5 55 5 52 6 6 6 5 58 50 5 5 0 NOTE: The heads of indicated fasteners are located underneath the deck. 8 6 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2

2 MOWER DECK ASSEMBLY (page of ) -585 POST, Anti-Scalp () -128 SCREW, /8-16 x 1-1/ Hex Head Cap, Grade 5 (8) 5-161 NUT, /8-16 Hex Flange (8) NOTE: -161 is the same as 6 2-265 BOLT, /8-16 x 2-58 Shoulder () -061 (Item ) except -1585 NUT, /8-16 Hex Center Lock (6) for the finish. 8 2-26 GAUGE WHEEL () 2-21 ROD, Deck Support 50 1-8 RING, /16 External Retaining 51-525 BELT, HA,.5 Effective Length 52 2-828 ADJUSTER, Chain (2) 5 2-8200 SWIVEL, Adjustable (2) 5-151 WASHER, 1/2 Flat () 55-150 HAIR PIN, /2 x 1-1/2 () 56 2-8021 COVER, Chain (2) 5-56 SPRING, External 58-6561 GUIDE, 8 /2 Idler Belt 5 1-206 WASHER, Cone (2) 60 2-1 IDLER, Outside Diameter, Flat 61-155 SCREW, /8-16 x 1-/ Hex Head Cap (2) 62 1-85 IDLER,.12 Outside Diameter, Flat 6-0 BOLT, 5/16-18 x 5/8 Short Neck Carriage, Grade 5 (2) 6 1-11 RETAINER, 5/16 Bolt (2) 65-115 WASHER, 5/16 Split Lock (2) 66-15 NUT, 5/16-18 Wing Lock (2) 6-10 BOLT, 5/16-18 x 1 Short Neck Carriage, Grade 5 (2) 68 5-101 ASSEMBLY, Chute & Decal (Includes 6 & 0) 6-0 CHUTE, Side (weldment) 0 2-681 DECAL, CPSC Heavy Adhesive 1-1601 NUT, 5/16-18 Hex Flange Lock (2) 2 2-606 CAP, Vinyl (2) -620 DECAL, Chute/Deflector 2-10 DECAL, 2 Inch NOTE: 5-15, 2 Deck Assembly includes items 1 thru except for items, 50, 5 & 56. YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 5

8 MOWER DECK SUB-ASSEMBLY (page 1 of ) 1 1 15 10 6 FRONT 2 1 11 12 18 1 1 8 1 5 12 1 1 12 16 20 16 1 16 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 6

8 MOWER DECK SUB-ASSEMBLY (page 2 of ) 1 1-8 RETAINER, /8 Bolt 2-660 STIFFENER, Deck -6611 WELDMENT, 8 Deck -0 HANGER, R.H. Rear 5-08 HANGER, L.H. Rear 6-0 BRACKET, Pulley Mounting -200 BRACKET, L.H. Front Lift 8-206 BRACKET, R.H. Front Lift -20 SPACER, 8 Deck Hanger 10 5-86 PLATE, 8 Anchor (weldment) 11 5-806 ASSEMBLY, Idler Arm/Lube Fitting (includes -606, Idler Arm Weldment and one item 12) 12 1-86 FITTING, /8 Lube (serrated) (5) 1 5-811 BRACKET, Hinge (8 Deck) 1-168 SPACER, Pivot Collar 15-0551 BOLT, 1/-20 x 5/8 Short Neck Carriage (2) 16-0 BOLT, 5/16-18 x 5/8 Short Neck Carriage, Grade 5 (12) 1-10 BOLT, 5/16-18 x 1 Short Neck Carriage, Grade 5 () 18-158 NUT, 1/ -20 Hex Flange Lock, Grade 5 (2) 1-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (16) 20-1888 BOLT, /8-16 x Square Neck Carriage, Grade 5 NOTE: 5-6, 8 Deck Sub-Assembly includes items 1 thru 20 as well as items 2, 25 &. YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

8 MOWER DECK ASSEMBLY (page of ) 5 50 6 2 5 50 1 22 26 50 8 22 2 8 2 5 2 8 0 55 0 2 25 2 5 25 5 6 21 5 0 52 2 ASSEMBLY 51 28 1 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 8

8 MOWER DECK ASSEMBLY (page of ) 21 1-251 PIN, 1/2 x 1-/8 Clevis 22 1-1 RING, External Retaining (2) 2 1-85 IDLER,.12 Flat 2 2-1 DECAL, 8 Deck 25 2-681 DECAL, CPSC (2) 26-581 SPRING, Chute 2 5-8508 SPRING, Idler Primary 28 2-25 CHUTE, Side Discharge 2 5-850 V-BELT, HA Section, (120.22 Nominal Effective Length) 0-628 BEARING, 1/2 x / Plastic (8) 1-601 SLEEVE, Caster Wheel () 2-602 WELDMENT, Bracket/Shaft Caster () -620 DECAL, Chute/Deflector -0 COVER, Belt L.H. 5-0 COVER, Belt R.H. 6-21 ROD, Timing 5-6 ASSEMBLY, 8 Spindle () (see page ) 8-21 IDLER, -1/ Flat (2) 5-8086 LINK, Leveling (2) 0 5-808 SUPPORT, Swivel (2) 1-20 HINGE PIN, Chute 2-1158 BOLT, /8-16 x 1-/ Short Neck Carriage, Grade 5 (2) -66 SPACER, Blade (8) -226 ROLLER, Low Density Polyethylene () 5-62 PIN, /8 x /8 Clevis 6-0250 WASHER, 1/2 Flat () -002 SCREW, 1/-20 x /8 Hex Washer Self-Tap () 8-056 NUT, /8-16 Hex Center Lock, Grade 5 or B () -0 SCREW, 1/2-20 x -1/2 Hex Head Cap, Grade 5 () 50-151 WASHER, /8 Flat () 51-0266 NUT, 1/2-20 Hex Center Lock, () 52-1628 WASHER,.6 I.D. Flat () 5-1 PIN, 1/8 x 1/2 Hair () 5-150 HAIR PIN, /2 x 1-1/2 () 55-066 WASHER, 1/2 Flat (2) NOTE: 5-, 8 Deck Assembly includes items 1 thru 55. YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

SPINDLE ASSEMBLY NOTE: 5-22, Housing assembly consists of items 1 and. 1 6 2 10 10 8 5 -- 5-21 ASSEMBLY, Spindle (includes items 1 thru 10) 1-62 HOUSING, Spindle (weldment) (5.55 overall length) 2 2-68 SPINDLE, Shaft (.5 overall length) 1-0 WASHER 1-1 BEARING, Spindle (2) 5-51 HOLDER, Blade 6 1-21 RING, 1-/ External Retaining (2) 1-081 FITTING, Lube 8-056 NUT, 5/8-18 Hex Center Lock Jam -01 SCREW, 1/2-20 x 1-1/ Hex Head Cap (2) 10-1 NUT, 1/2-20 Hex Jam (2) MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 0

8 SPINDLE ASSEMBLY 5 2 2 6 8 1 5-51 ASSEMBLY, 8 Spindle Housing (Includes Items 2 thru ) 2 2-6808 BEARING, Spindle (2) 2-65 SPACER, Spindle Housing 2-61 HOUSING, Spindle 5 2-65 SPINDLE (.02 overall length) 6 2-6 SPACER, Blade 2-6 WASHER, Belleville, 1/2 8-16 NUT, /16-18 Hex Jam -28 BLADE, 1.6 YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 1

2 SPINDLE ASSEMBLY 1 ASSEMBLY 2 2 NOTE: 5-118, Assembly consists of items and 8. 6 5 8 1 5-2 ASSEMBLY, Spindle Housing, 2 Cutting Deck (Includes items 2 thru 8) 2 1-21 RING, Retaining (2) 1-1 BEARING, Spindle (2) -1 HOUSING, Spindle (weldment) (5.1 overall length) 5-22 HOLDER, Blade 6 1-0 WASHER, Spindle 2-668 SPINDLE (6.5 overall length) 8 1-081 FITTING, Lube MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 2

8 SPINDLE ASSEMBLY 2 1 12 5 1 1 18 1 1 8 16 10 15 1 11 -- 5-6 GROUP, 8 Spindle (includes items 1 thru 16) 1 2-22 BEARING, Sealed (2) 2 2- WASHER, 5/8 SAE Flat 2-2 SNAP-RING, Spindle Shaft 5-11 ASSEMBLY, Spindle Shaft 5 2-25 SPACER, Bearing 6 5-01 ASSEMBLY, Casting (includes items and 8) 2-252 HOUSING, Spindle 8 2-02 BOLT, /8-16 x 1-1/ Rib Necked (6) 2-8 VENT, Spindle 10 2-25 FITTING, Lube 11 6-25 BOLT, Blade 5/8-11 x Hex Head, Grade 5 12 5-80 PULLEY, Driven.5 O.D. 1-12 NUT, /8-16 Hex Nyloc (6) 1 6-2 NUT, 5/8-11 Hex Flange Lock, Grade 5 15 1-60 WASHER, Beveled 16 2-2 BLADE, 16-5/16 1-20 CUP, Spindle Cover -- 6-20 KIT, Bearing Seal Field Fix (incl. items 18 & 1) 18 6-28 SEAL, Nylos 1 1-0 WASHER NOTE: 5-011, Spindle Assembly consists of asterisk marked part numbers shown above. NOTE: For Bearing Pre-seal Kit installation, discard item & replace with items 18 & 1 as shown. YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

ENGINE COMPONENTS 6 5 1 10 5 2 1 8 2 11 1 12 PURCHASE ENGINE AND ENGINE PARTS OTHER THAN THOSE LISTED FROM ENGINE SERVICE OUTLETS 15 1 28 0 2 2 1 26 16 20 18 1 21 22 2 25 2 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2

6 0 ENGINE COMPONENTS 8 1 ENGINE, 18HP Briggs (Model 50, Type 112, Trim E1) -- ENGINE, 1HP Briggs OHVIC (Model 28Q, Type 0122, Trim 01) -- ENGINE, 15HP Kohler (Model CV15S, Type PS150) 2 1-2652 WIRE CLIP, /16-188 FITTING, Oil Drain 0 (Briggs 1HP) -- 2-286 FITTING, Oil Drain Short (Kohler 15HP) 2-2 ASSEMBLY, Oil Valve 5-6506 CONTROL, Throttle (Kohler 15HP, 52.5 conduit length) -- 2-62 CONTROL, Throttle (Briggs 1HP,.6 conduit length) -- -22 CONTROL, Throttle (Briggs 18HP, 1.0 conduit length) 6 2-655 LEVER, Throttle Control -120 SCREW, #10-2 x 5/8 Hex Washer Head, Grade 5 (2) 8-06 NUT, #10-2 Nyloc (2) -101 SCREW, #8-2 x /8 Machine 10-1018 NUT, #8-2 Hex 11-68 PLATE, Engine 12-02 SCREW, /8-16 x 1 Hex Washer Head (Briggs) () -- -62 SCREW, M8-1.25 x 25mm Hex Washer Self-Tapping (Kohler) () 1-115 WASHER, 5/16 Split Lock (Kohler) () 1-562 GUIDE, Belt 15-1822 PULLEY, Engine 16 1-0210 KEY, 1/ Square x 2 1-168 COVER, Spark Plug Access (Briggs 1HP) 18-101 WASHER, /16 Split Lock 1-16 SCREW, /16-20 x 1-1/2 Hex Head Cap, Grade 5 20 1-2222 CLAMP, Fuel Hose (2) 21-1856 HOSE, Fuel 1/ I.D. x 20 (Briggs 1 HP) -- 2-82 HOSE, Fuel 1/ I.D. x 1 (Kohler 15 HP) 22-58 PIPE, Exhaust (Briggs 1HP) -- -61 PIPE, Exhaust (Kohler 15HP) -- -68 PIPE, Exhaust (Briggs 18HP) 2-65 MUFFLER 2-0206 SCREW, 5/16-18 x / Hex Head Cap, Grade 5 (Briggs 1HP) (2) 25 1-552 GASKET, Exhaust (Briggs 1HP) 26-15 DEFLECTOR, Muffler (2 Deck only) 2-1581 SCREW, #8-18 x 1/2 (2 Deck only) () 28 2-185 CONTROL CABLE, Choke (Kohler 15HP) 2-00 WASHER, /8 Internal Tooth Lock (Kohler) 0-0155 NUT, /8-2 Hex (Kohler 15HP) 1-2 HEAT SHIELD, Sides (Kohler 15HP) 2-658 HEAT SHIELD, Top (Kohler 15HP) -0816 SCREW, #10-2 x /8 Sheet Metal (Qty. Kohler, 8 Briggs) -2825 DUCT, Right Hand (Briggs 1HP) 5-168 DUCT, Front (Briggs 1HP) 6-151 HEAT SHIELD, Starter -150 HEAT SHIELD, Battery (not shown) 8 5-8221 DUCT, Air (Briggs 18HP) -216 SHIELD, Engine Speed Control Heat 0-1012 SCREW, #10-2 x /8 Self Tapping (2) YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 5

DECALS 1 2 5 6 10 8 11 12 1 1 MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 6

DECALS 15 16 1 18 22 20 1 21 1-620 DECAL, Warning Chute Deflector 2-168 DECAL, Hydro Release 2-681 DECAL, CPSC -6 DECAL, Hydro Reservoir (2) 5-652 DECAL, Throttle Control 6-6528 DECAL, Throttle Control -651 DECAL, Ignition Switch 8-516 DECAL, Park Brake 2-21 DECAL, Hi-Vac 10 2-615 DECAL, 8 11 2-10 DECAL, 2 12 2-1 DECAL, 8 1-51 DECAL, Operation 1-588 DECAL, SNAPPER Z Rider (Steel Bodied Models) 15-61 DECAL, Safety Instructions 16-166 DECAL, Heat Shield 1-6562 DECAL, Certification 18-626 DECAL, Deck Height 1-55 DECAL, "Yard Cruiser" (2) 20-1881 DECAL, Briggs 1HP Engine 21-1882 DECAL, Kohler 15HP Engine 22-65 DECAL, Deck Position 2-5 DECAL, OPEI (Not Shown) YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

ELECTRICAL COMPONENTS RED: L. C. D Plug (Item 1 or ) PURPLE: M. O. P. G. E. D. A. K. N. F. On battery end Of item 5 GROUND (ENGINE BOLT) Fuse 2-65 20 AMP H. B. D. F. C. N. Q. O. P. G. F. E. D. A. K. I. GROUND (CHASSIS) Fuse 2-65 20 AMP H. B. DRAIN TUBE J. MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 8

ELECTRICAL COMPONENTS 1-588 WIRING HARNESS (Briggs 1HP) -- -266 WIRING HARNESS (Briggs 18HP) (Same except L & M plug) 2-011 SCREW, #10-2 x 1/2 Hex Head Cap (2) -616 WIRING HARNESS (Kohler 15HP) -526 WIRING HARNESS, Warner Clutch (8" & 2" Models) 5 1-685 WIRE, Positive, 1" 6-256 WIRE, Negative, 1-16 COVER, Battery Cable 8 2-850 RELAY, Operator Presence Control 2-2886 SWITCH, Seat (DP, NO/NC SNAP-IN) 10 2-852 SWITCH, PTO Electric Clutch 11 2-55 SWITCH, Park Break 12-01 SCREW, #10-2 x 1/2 Hex Washer Head, Self-Tapping () 1 2-10 BATTERY, 12 Volt, 1 Amp, 10 Cold Cranking Amp (Includes Drain Tube) 1 2-6 SWITCH, Ignition (After-fire Solenoid) 15 2-1 SPACER 16 2-506 BEZEL 1 1-860 SOLENOID, 12 Volt 18-001 SCREW, 1/-20 x 1/2 Hex Head Cap, Grade 5 (2) 1-158 NUT, 1/-20 Hex Flange Lock, Grade 5 (2) 20-11 WASHER, 1/ Internal Tooth Lock (2) 21-0 NUT, 1/-20 Hex Jam (2) 22 1-2688 NUT, #10-2 Hex Twin Whiz Lock (2) PLUG CONNECTS TO: A. Brake Switch B. PTO Switch C. Seat Switch D. Electric Clutch E. Relay F. Solenoid Battery Terminal G. Solenoid Starter Terminal H. Ignition Switch I. Battery, Positive Terminal J. Battery, Negative Terminal K. Alternator L. Ignition Ground M. Anti-After Fire N. Start Engine O. Solenoid Spade Terminal P. Solenoid Spade Terminal Q. Ground at Solenoid YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610

WIRING SCHEMATICS WIRING SCHEMATIC 1 HP BRIGGS ENGINE FOR & 8 YARD CRUISER MANUAL No. 0610 YARD CRUISER HYDRO SERIES 1 & 2 50

WIRING SCHEMATICS WIRING SCHEMATIC 15 HP KOHLER ENGINE FOR 2 YARD CRUISER YARD CRUISER HYDRO SERIES 1 & 2 MANUAL No. 0610 51

Parts Manual for YARD CRUISER HYDRO DRIVE HZ SERIES 1 & 2 MODELS HZS11BVE HZS181BVE HZS1521KVE HZS1522KVE HZS1681BVE HZS1882BVE TM IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 2002 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No. 0610 (Rev. 5, 0/0/02) Printed in U.S.A. 52