D8T Track-Type Tractor Technical Specifications Engine Engine Model Cat C15 ACERT Emissions U.S. EPA Tier 4 Final/ EU Stage IV/ Korea Tier 4 Final Net Power (Rated) 1,900 rpm ISO 9249/SAE J1349 264 kw 354 hp ISO 9249/SAE J1349 (DIN) 359 hp Engine Power (Maximum) 1,600 rpm ISO 14396 294 kw 394 hp ISO 14396 (DIN) 400 hp Bore 137 mm 5.4 in Stroke 172 mm 6.75 in Displacement 15.2 L 928 in3 Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. No derating required up to 3566 m (11,700 ft) altitude, beyond 3566 m (11,700 ft) automatic derating occurs. All nonroad Tier 4 Final, Stage IV, Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for ization (ISO) standard 22241. Service Refill Capacities Fuel Tank 627 L 165 gal Diesel Exhaust Fluid Tank 24 L 6.3 gal Cooling System 86 L 22.7 gal Engine Crankcase* 38 L 10.0 gal Power Train 155 L 41.0 gal Final Drives (each) 12.5 L 3.3 gal Roller Frames (each) 65 L 17.2 gal Pivot Shaft Compartment 40 L 10.6 gal Hydraulic Tank 75 L 19.8 gal * With oil filter. Air Conditioning System The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO 2 equivalent of 3.575 metric tonnes.
D8T Track-Type Tractor Specifications Weights Operating Weight (Single-Shank Ripper) 39 750 kg 87,600 lb LGP (Drawbar) 37 750 kg 83,200 lb Shipping Weight (Single-Shank Ripper) 30 400 kg 67,020 lb LGP (Drawbar) 31 490 kg 69,425 lb Operating Weight : Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator. Operating Weight LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, 965 mm (38 in) MS shoes, and operator. Shipping Weight : Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes. Shipping Weight LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 965 mm (38 in) MS shoes. Weights Waste Handler Operating Weight Waste Handler 39 650 kg 87,400 lb LGP Waste Handler 41 850 kg 92,300 lb Shipping Weight Waste Handler 33 610 kg 74,100 lb LGP Waste Handler 35 630 kg 78,550 lb Operating Weight : Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, striker box, 610 mm (24 in) MS shoes, and operator. Operating Weight LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, 965 mm (38 in) MS shoes, striker box, and operator. Shipping Weight : Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 610 mm (24 in) MS shoes. Shipping Weight LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 965 mm (38 in) MS shoes. Undercarriage Shoe Type Moderate Service Width of Shoe 610 mm 24 in Shoes/Side 44 Track Rollers per Side 8 Grouser Height 78 mm 3.1 in Pitch 216 mm 8.5 in Ground Clearance 613 mm 24.1 in Track Gauge 2083 mm 82 in Length of Track on Ground 3206 mm 126 in Ground Contact Area 3.91 m2 6,060 in2 Ground Pressure (ISO 16754) 90.3 kpa 13.1 psi LGP Shoe Type Moderate Service Width of Shoe 965 mm 38 in Shoes/Side 44 Track Rollers per Side 8 Grouser Height 78 mm 3.1 in Pitch 216 mm 8.5 in Ground Clearance 613 mm 24.1 in Track Gauge 2337 mm 92 in Length of Track on Ground 3206 mm 126 in Ground Contact Area 6.19 m2 9,593 in2 Ground Pressure (ISO 16754) 54.2 kpa 7.9 psi Hydraulic Controls Pump Type Piston-type, Variable Displacement Pump Output (Steering) 284 L/min 75 gal/min Pump Output (Implement) 244 L/min 64 gal/min Tilt Cylinder Rod End Flow 132 L/min 35 gal/min Tilt Cylinder Head End Flow 170 L/min 45 gal/min Bulldozer Relief Valve Setting 24 000 kpa 3,480 psi Tilt Cylinder Relief Valve Setting 24 000 kpa 3,480 psi Ripper (Lift) Relief Valve Setting 24 000 kpa 3,480 psi Ripper (Pitch) Relief Valve Setting 24 000 kpa 3,480 psi Steering 43 000 kpa 6,240 psi Steering Pump output measured at 2,364 rpm (pump speed) and 30 000 kpa (4,351 psi). Implement Pump output measured at 1,900 rpm and 6895 kpa (1,000 psi). Electro-hydraulic pilot valve assists operations of ripper and dozer controls. A standard hydraulic system includes four valves. Complete system consists of pump, tank, filter, oil cooler, valves, lines, and control levers. 2
D8T Track-Type Tractor Specifications Transmission 1 Forward 3.5 km/h 2.2 mph 1.5 Forward 4.8 km/h 3.0 mph 2 Forward 6.6 km/h 4.1 mph 3 Forward 11.3 km/h 7.0 mph 1.5 Reverse 4.8 km/h 3.0 mph 2.0 Reverse 6.4 km/h 4.0 mph 2.5 Reverse 8.7 km/h 5.4 mph 3.0 Reverse 11.8 km/h 7.3 mph Drawbar Pull 1 Forward 659.2 kn 148,200 lbf 1.5 Forward 490.8 kn 110,350 lbf 2 Forward 366.1 kn 82,300 lbf 3 Forward 205.8 kn 46,250 lbf DRAWBAR PULL lbf 1000 160 140 120 100 80 60 40 20 0 N 1000 700 600 500 400 300 200 100 1.0 1.5 2.0 2.5 3.0 0 0 2 4 6 8 10 12 km/h 0 1 2 3 4 5 6 7 SPEED mph Ripper Single-Shank, Adjustable Parallelogram Multi-Shank, Adjustable Parallelogram Number of Pockets 1 3 Overall Beam Width 2464 mm 97 in Maximum Clearance Raised (under tip, pinned in bottom hole) 636 mm 25 in 593 mm 23.4 in Maximum Penetration (standard tip) 1130 mm 44.4 in 780 mm 30.7 in Maximum Penetration Force (shank vertical) 127.3 kn 28,620 lb 124.2 kn 27,920 lb Pry out Force 222.7 kn 50,070 lb Pry out Force (Multi-Shank Ripper with one tooth) 222.9 kn 51,230 lb Weight* (without hydraulic controls) 3957 kg 8,705 lb Weight With One Shank 3946 kg 8,681 lb Each Additional Shank 332 kg 732 lb Total Operating Weight* (with SU-Blade and Ripper) 39 750 kg 87,600 lb 39 740 kg 87,610 lb * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank 610 mm (24 in) MS shoes, and operator. 3
D8T Track-Type Tractor Specifications Winches Winch Model PA140VS Weight* 2136 kg 4,709 lb Oil Capacity 15 L 4 gal Increased Tractor Length 781 mm 30.7 in Winch Length 1614 mm 63.5 in Winch Case Width 1226 mm 48.3 in Drum Width 332 mm 13.1 in Flange Diameter 610 mm 24.0 in Recommended Cable Size 29 mm 1.13 in Optimal Cable Size 32 mm 1.25 in Drum Capacity Recommended Cable Length 84 m 276 ft Optional Cable 62 m 204 ft Variable speed, hydraulically driven, dual braking system, three roller fairlead. * Includes winch, mounting group, and oil. Winch Model W12E Weight* 2880 kg 6,350 lb Oil Capacity 121 L 32 gal Increased Tractor Length 669 mm 26.4 in Winch Length 1485 mm 58.5 in Winch Case Width 1216 mm 48.0 in Drum Width 281 mm 12.0 in Flange Diameter 635 mm 25.0 in Recommended Cable Size 29 mm 1.13 in Optimal Cable Size 32 mm 1.25 in Drum Capacity Recommended Cable Length 69 m 227 ft Optional Cable 55 m 181 ft Fixed speed, PTO driven. * Includes winch, mounting group, and oil. s The declared dynamic operator sound pressure level is 76 db(a) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods. Sound Level Information for Machines in European Union Countries and in Countries that Adopt the European Union Directives The information below applies to only the machine configurations that have the CE mark on the Product Identification Plate. The declared dynamic operator sound pressure level is 75 db(a) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The declared exterior sound power level is 113 db(a) when the value is measured according to the dynamic test procedures and the conditions that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. ROPS/FOPS Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II. Brakes Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008. Track Shoes 610 mm (24 in) 660 mm (26 in) 700 mm (27.5 in) 710 mm (28 in) 965 mm (38 in) Positive Pin Retention Track Moderate Service Moderate Service, Trapezoidal Extreme Service Extreme Service, Trapezoidal Heavy Duty Extreme Service Track HDXL with DuraLink Additional track shoe types/widths available by special order. Please consult your Cat dealer for details. 4
D8T Track-Type Tractor Specifications Blades Capacity Width* Width Over End Bits Height Digging Depth Semi-Universal (SU) 10.3 m3 13.4 yd3 3900 mm 12.8 ft 4042 mm 13.3 ft 1747 mm 5.7 ft 573 mm 22.56 in SU with Rock Guard, 10.3 m3 13.4 yd3 3900 mm 12.8 ft 4042 mm 13.3 ft 2017 mm 6.6 ft 573 mm 22.56 in Wear Plate SU with Push Plate 10.3 m3 13.4 yd3 3900 mm 12.8 ft 4042 mm 13.3 ft 1747 mm 5.7 ft 573 mm 22.56 in SU Landfill with Wear Plate 21.2 m3 27.8 yd3 3900 mm 12.8 ft 4042 mm 13.3 ft 2553 mm 8.4 ft 573 mm 22.56 in SU with Performance 10.3 m3 13.4 yd3 3900 mm 12.8 ft 3962 mm 13.0 ft 1747 mm 5.7 ft 573 mm 22.56 in Cutting Edges SU with Rock Guard, 10.3 m3 13.4 yd3 3900 mm 12.8 ft 3962 mm 13.0 ft 2017 mm 6.6 ft 573 mm 22.56 in Performance Cutting Edges Universal 11.8 m3 15.4 yd3 4123 mm 13.5 ft 4265 mm 14.0 ft 1732 mm 5.7 ft 573 mm 22.56 in Universal with Rock Guard, 11.8 m3 15.4 yd3 4123 mm 13.5 ft 4265 mm 14.0 ft 2012 mm 6.6 ft 573 mm 22.56 in Wear Plate Universal Landfill 23.4 m3 30.6 yd3 4123 mm 13.5 ft 4265 mm 14.0 ft 2544 mm 8.3 ft 573 mm 22.56 in Angle Blade 5.2 m3 6.8 yd3 4531 mm 14.9 ft 5043 mm 16.5 ft 1177 mm 3.9 ft 625 mm 24.61 in LGP SU 9.9 m3 12.9 yd3 4402 mm 14.4 ft 4543 mm 14.9 ft 1622 mm 5.3 ft 575 mm 22.64 in LGP SU Landfill 22.2 m3 29.0 yd3 4402 mm 14.4 ft 4543 mm 14.9 ft 2454 mm 8.0 ft 575 mm 22.64 in LGP Angle 5.6 m3 7.3 yd3 5041 mm 16.5 ft 5553 mm 18.2 ft 1177 mm 3.9 ft 625 mm 24.61 in Rear Attachment in Total Operating Weight Ground Clearance Maximum Tilt Weight* (without hydraulic controls) Total Operating Weight** Semi-Universal (SU) 1255 mm 49.41 in 895 mm 35.24 in 4407 kg 9,716 lb 39 750 kg 87,634 lb SS ripper 1255 mm 49.41 in 895 mm 35.24 in 4998 kg 11,019 lb 40 341 kg 88,937 lb SS ripper SU with Rock Guard, Wear Plate SU with Push Plate 1255 mm 49.41 in 895 mm 35.24 in 4655 kg 10,263 lb 39 998 kg 88,180 lb SS ripper SU Landfill with Wear Plate 1255 mm 49.41 in 895 mm 35.24 in 5251 kg 11,576 lb 39 650 kg 87,413 lb striker box SU with Performance 1255 mm 49.41 in 895 mm 35.24 in 4547 kg 10,024 lb 39 890 kg 87,942 lb SS ripper Cutting Edges SU with Rock Guard, 1255 mm 49.41 in 895 mm 35.24 in 5130 kg 11,310 lb 40 473 kg 89,228 lb SS ripper Performance Cutting Edges Universal 1230 mm 48.43 in 968 mm 38.11 in 4895 kg 10,792 lb 40 238 kg 88,709 lb SS ripper Universal with Rock Guard, 1230 mm 48.43 in 968 mm 38.11 in 5454 kg 12,024 lb 40 797 kg 89,942 lb SS ripper Wear Plate Universal Landfill 1230 mm 48.43 in 968 mm 38.11 in 5840 kg 12,876 lb 40 239 kg 88,712 lb striker box Angle Blade 1323 mm 52.09 in 733 mm 28.86 in 5121 kg 11,289 lb 40 464 kg 89,208 lb SS ripper LGP SU 1228 mm 48.35 in 859 mm 33.82 in 4703 kg 10,368 lb 37 750 kg 83,224 lb drawbar LGP SU Landfill 1228 mm 48.35 in 859 mm 33.82 in 5062 kg 11,159 lb 41 850 kg 92,263 lb striker box LGP Angle 1323 mm 52.09 in 657 mm 25.87 in 5714 kg 12,597 lb 38 761 kg 85,453 lb drawbar * Includes blade tilt cylinder. ** Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, rear attachment, 610 mm (24 in) MS shoes, and operator. 5
D8T Track-Type Tractor Specifications Dimensions All dimensions are approximate. 3 7 1 2 4 5 6 Non-Suspended LGP* 1 Track Gauge 2083 mm 82.0 in 2083 mm 82.0 in 2337 mm 92.0 in 2 Width of Tractor Over Trunnions 3057 mm 120.4 in 3057 mm 120.4 in 3311 mm 130.4 in Without Trunnions (standard shoe width) 2693 mm 106.0 in 2693 mm 106.0 in 3302 mm 130.0 in 3 Machine Height**, from Tip of Grouser Exhaust Stack 3472 mm 136.7 in 3463 mm 136.3 in 3295 mm 129.7 in EROPS (to top of railing) 3566 mm 140.4 in 3575 mm 140.7 in 3566 mm 140.4 in 4 Length of Track on Ground 3206 mm 126.2 in 3258 mm 128.3 in 3206 mm 126.2 in 5 Length of Basic Tractor (tag link trunnion to tip of rear grouser) 4647 mm 183.0 in 4647 mm 183.0 in 4647 mm 183.0 in With the following attachments add: Ripper Single-Shank (with tip at ground line) 1519 mm 59.8 in 1519 mm 59.8 in Not Available Ripper Multi-Shank (with tip at ground line) 1613 mm 63.5 in 1613 mm 63.5 in Not Available SU Blade 1904 mm 75.0 in 1904 mm 75.0 in 1904 mm 75.0 in U Blade 2241 mm 88.2 in 2241 mm 88.2 in Not Available A Blade (not angled) 2027 mm 79.8 in 2027 mm 79.8 in Not Available A Blade (angled 25 degrees) 3068 mm 120.8 in 3068 mm 120.8 in Not Available Drawbar 406 mm 16.0 in 406 mm 16.0 in 406 mm 16.0 in 6 Height of Grouser 78 mm 3.1 in 78 mm 3.1 in 78 mm 3.1 in 7 Ground Clearance 613 mm 24.1 in 606 mm 23.8 in 613 mm 24.1 in * shoe width of D8T LGP with non-suspended undercarriage is 965 mm (38 in). **When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). 6
D8T and Optional Equipment and Optional Equipment and optional equipment may vary. Consult your Cat dealer for details. Optional Optional POWER TRAIN Cat C15 ACERT Diesel Engine, electronic unit injection Engine mounted aftertreatment to meet Tier 4 Final/Stage IV/Korea Tier 4 Final emission standards 24V electric start Aftercooler, air-to-air (ATAAC) Air filter, with electronic service indicator Brakes, Extreme Service Coolant, extended life Drains, ecology, power train Engine precleaner with screen Engine, thermal shield Fan, suction, auto reversing Four planet, double-reduction planetary final drives Fuel priming pump, electric Full autoshift High performance single plane cooling system Oil change system, high speed Parking brake, electronic Precleaner, strata-tube dust ejector Prescreener Radiator, 6.35 fins per inch, debris Sound attenuated exhaust system Starting aid, automatic ether Torque divider with lock-up clutch Transmission control module, electronic Transmission, electronically-controlled powershift Turbocharger Water separator CAT CONNECT TECHNOLOGY Attachment Ready Option (ARO) AutoCarry/AutoRip, single tilt or dual tilt Cat GRADE with 3D Cat GRADE with Slope Assist Cat Slope Indicate COMMAND for Dozing Ready Grade Control Ready Product Link Cellular or Dual Mode OPERATOR ENVIRONMENT Access/egress lighting with shutdown timer Armrests, adjustable Cab glass enhanced 40 psi Cab glass enhanced dual pane Cab, ROPS/FOPS, sound suppressed Deactivation switch, hydraulic controls Decelerator pedal Governor switch, electronic Heater and ventilation Interior LED courtesy lights Mirror, rearview Provision for wire passage in/out of cab Radio, AM/FM, Bluetooth ROPS mounted air conditioner Seat belt, retractable Seat, cloth, air-suspension Seat, cloth, heated Seat, heated and ventilated Touchscreen operator interface Visibility arrangement mirrors Visibility arrangement single camera Window shades Wipers, intermittent (continued on next page) 7
D8T and Optional Equipment and Optional Equipment (continued) and optional equipment may vary. Consult your Cat dealer for details. UNDERCARRIAGE Gauge arrangements or LGP Rollers and idlers, lifetime lubricated Sprocket rim segments, replaceable Suspension-type undercarriage 8-roller tubular track roller frame (carrier roller ready) Track adjusters, hydraulic Track guide Two-piece master links Positive Pin Retention (PPR) undercarriage 44 section track, sealed and lubricated, single grouser shoes 610 mm (24 in) PPR moderate service shoes* PPR undercarriage, suspended, guarded PPR undercarriage, arctic Heavy Duty, Extended Life (HDXL) undercarriage 44 section track, sealed and lubricated, single grouser shoes HDXL undercarriage, suspended HDXL undercarriage, suspended, guarded HDXL undercarriage, arctic Carrier rollers, suspended Carrier rollers, suspended arctic Carrier rollers, none Final drives, standard or LGP Final drives, standard or LGP, guarded Final drives, standard, arctic *For optional track shoe offerings, please refer to chart on page 4. Optional Optional HYDRAULICS Dozer tilt hydraulics dual tilt Dozer tilt hydraulics single tilt Electronically enabled quick drop valve Hydraulics, electronically controlled, load-sensing dozer lift and tilt Hydraulics, electronically controlled, load-sensing rear hydraulics, ripper or winch ready Hydraulics, independent steering and work tool pumps Hydraulics, ripper Hydraulics, winch ELECTRICAL Alarm, back-up Converter, 24V to 12V Diagnostic connector Ground level service center with hour meter Horn, forward warning Light, warning strobe Light, warning strobe mount Lights premium light package Lights six-light package BULLDOZERS (see chart for available blade options) 8SU/U basic, guarded or dual tilt guarded 8SU LGP basic 8 LGP single tilt guarded or dual tilt guarded 8A (continued on next page) 8
D8T and Optional Equipment and Optional Equipment (continued) and optional equipment may vary. Consult your Cat dealer for details. Optional Optional PUSH ARMS Single tilt, standard FLUIDS, LUBRICANTS, COOLANTS Engine coolant, standard ( 37 C/ 35 F) Single tilt, extreme Engine coolant, arctic ( 51 C/ 60 F) Dual tilt, standard or extreme BOTTOM GUARDS Hinged OTHER STANDARD EQUIPMENT Equalizer bar, pinned Front pull device Powered HVAC box corrosive resistant Heavy duty, sealed Mounting, lift cylinders Wood chip Oil cooler, hydraulic Bottom guards with front counterweight Product Link REAR ATTACHMENTS Ripper single-shank Ripper single-shank with pin puller Ripper single-shank with striker bar Ripper single-shank with puller and striker bar Ripper multi-shank Ripper multi-shank with striker bar Counterweight, rear Drawbar, rigid Rear striker bar Winch, PA140VS, variable speed Winch, W12E PTO STARTERS, BATTERIES, AND ALTERNATORS Batteries Heavy Duty Batteries Arctic Alternators 150 Amp S O S SM sampling ports Steering, electronically controlled power differential Vandalism protection for fluid compartments Engine compartment service light GUARDS Guard, fan debris Guard, fast fuel Guard, fuel tank Guard, grill debris Rear screen Striker bars, front, suspended Sweeps group OTHER ATTACHMENTS Black paint, blade Grab handles, push arm Alternators 150 Amp, ducted Starting aids engine heaters Heater, engine coolant (120V) 9
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com 2018 Caterpillar All rights reserved AEXQ2356-01 (05-2018) Replaces AEXQ2356 Build Number: 21A (North America, Europe, ANZ, Turkey, Korea) Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.