Fire-fighting equipment

Fire-fighting equipment

Sweden s leading manufacturer of fire-fighting equipment Most of the hardware for water-based fire-fighting, in terms of valves, nozzles, hydrants etc. used in Sweden today comes from Tour & Andersson ydronics AB. This leading position has been obtained primarily as a result of the company s products high quality and excellent reliability. TA ydronics checks every stage of manufacture, from the preparing of the metals used on to the completed product. ow weight is particularly important in the case of portable fire-fighting equipment. TA ydronics Pressal designs, using special light metal alloys, combine easy handling and low weight with good strength. Special heat treatment and anodising ensure that all Pressal products have good corrosion resistance. 2

Contents Page Fogfighter, fog nozzles 4-6 andifighter II, fog nozzles 7-8 Nozzles 9-11 Fire hydrant valves 12 Coupling parts 13 ose couplings 14 ividers 15-16 Fire hydrant heads 17 Spare parts 18 3

FOGFIGTER FOGFIGTER is a spray nozzle with excellent extinguishing characteristics. The spray pattern can be steplessly varied by handgrip action from a closed jet to a protective jet, with the right droplet size for every situation. Water flow rate can be quickly varied between closed and the 100 litre and 300 litre rates. Technical description Materials: Vital parts are made of chrome/nickel-treated AMETA. Spindles, springs, covering rings, balls and screws are of stainless steel. Buffers, O-rings and seals are of chloroprene rubber. The toothed ring and the shut-off ball are of acetal plastic. Spray form control is of Super Tough nylon. The slider ring is of Teflon. AMETA is the dezincification resistant alloy of TA ydronics. Surface treatment: ight-alloy parts anodised. The housing and control handle are also Rilsan -treated. Maximum working pressure: 200 mwg = 20 bar. Function Nozzle section The water flow rate changes only insignificantly when changing between different spray forms. alf a turn of the spray forms control provides the following functions: - concentrated jet - spread jet - fog - protective water curtain - flushing The spray form control has the following marked positions: JET - solid jet for maximum throw. FOG - a cone-shaped jet, the angle being variable up to 120. A sturdy lug indicates a cone angle of about 75. FUS - indicates the flushing position to rinse out impurities with a diameter of up to 5 mm while firefighting is going on. Shut-off Fogfighter is available in two versions, each of which has two flow rate settings: - 100 l/min or 300 l/min at 6 bar - 175 l/min or 450 l/min at 6 bar The control handle controls the flow as follows: - closed - 100 (175) l/min (indicated by a click-in position) - 300 (450) l/min (fully open) Automatic pressure maintenance The nozzle incorporates a spring assembly that controls the flow in order to maintain good extinguishing performance at low pressures if the inlet pressure falls below 6 bar. This maintains a good spray pattern down to pressures of 20-25 mwg. 115 325 180 335 190 Straight TA No With pistol grip TA No Flow 100/300 l/min With swivel and Swedish coupling -32 59 470-232 With female thread G1 1/2 59 470-500 With swivel coupling, female thread G1 1/2 59 470-550 Flow 175/450 l/min With swivel and Swedish coupling -63 59 471-263 With female thread G1 1/2 59 471-500 With swivel coupling, female thread G1 1/2 59 471-550 Flow 100/300 l/min With female thread G1 1/2 59 470-900 With swivel and Swedish coupling -32 59 470-932 With swivel coupling, female thread G1 1/2 59 470-950 Flow 175/450 l/min With female thread G1 1/2 59 471-900 With swivel coupling, female thread G1 1/2 59 471-950 With swivel and Swedish coupling -63 59 471-963 Separate nozzle section Female thread G1 1/4 Flow 300 l/min 59 473-500 Female thread G1 1/4 Flow 450 l/min 59 474-500 The specified flows apply at a pressure of 6 bar or 60 mwg. 4

Jet characteristics 1. Solid spray fog 2. Cone shaped spray fog, up to 120 3. Flushing Shut-off characteristics 1. Fully closed 2. 100 (175) l/min at 6 bar 3. Fully open. 300 (450) l/min at 6 bar Flow l/min Flow 1 2 Raised indication on spray form control handle indicates 75 cone angle. Toothed ring starts operating. Jet bar/mvp Throw/min Throw Spray coverage area (A) with different cone angles (a) Cone angle (α) Coverage area A degrees m 2 bar/mvp 15 0,6 30 1,6 45 2,8 60 5,3 75 9,1 90 13,9 105 21,2 120 30,2 5

Components - FOGFIGTER 1 andle 1 27 28 29 30 26 25 49 24 23 49 21 22 20 8 50 6 7 5 4 3 2 19 18 31 48 43 42 47 41 44 45 9 46 10 12 11 13 14 15 2 Spray form control 16 17 32 33 34 35 40 39 36 37 38 3 Spring assembly 4 Toothed ring Item no. escription Part no. 1 andle 100/300 l/min andle 175/450 l/min 305 383-01 305 383-02 2 Ball 100/300 l/min Ball 175/450 l/min 305 382-01 305 442-01 3 Slide ring 305 392-01 2 4 O-ring 100 534-05 2 5 Outer spindle 305 390-01 6 Inner spindle (insex 6) 305 389-01 7 O-ring 100 534-02 2 8 Seal holder 305 381-01 9 Thread-pressing screw 100 274-02 10 O-ring 100 534-06 2 11 Seal 4462 14-63 3 12 1 Indicating washer 305 376-01 13 1 Thread-pressing screw 100 274-01 14 Support washer 305 378-01 15 Spindle (insex 6) 305 394-01 16 Spring 305 384-01 2 17 Ball 100 485-07 2 18 O-ring 100 534-02 2 Item no. escription Part no. 19 1 ouse ouse, pistol grip 305 380-60 305 445-60 20 Inner sleeve 305 405-01 21 Spacer nut (6k14 spanner) 305 412-01 22 ock ring 305 410-01 23 Spindle holder 100/300 305 408-01 Spindle holder 175/450 305 439-01 24 Spring 305 413-01 2 25 O-ring 100 534-04 2 26 Spring holder 305 409-01 27 Runner 305 407-01 28 Securing ring 305 423-01 29 ock ring 305 417-01 2 30 Outer sleeve 100/300 Outer sleeve 175/450 305 406-01 305 437-01 31 Rubber buffer Flange 305 421-01 305 422-01 32 ock ring 305 417-01 2 33 Cover 305 420-01 3 34 Guide ring 305 424-01 Item no. escription Part no. 35 Spacer washer 305 416-01 36 Toothed ring 305 425-01 3 37 Screw (insex 2,5) 100 187-09 38 O-ring 100 534-03 2 39 Spring 305 403-01 2 40 Ball 100 485-07 2 41 Support ring 305 415-01 42 O-ring 100 534-02 2 43 Cone 100/300 l/min Cone 175/450 l/min 305 414-01 305 438-01 44 Spindle 305 411-01 45 Guide screw (insex2,5) 305 404-01 2 46 Spray form control 305 426-01 47 Marking washer 305 440-01 4 48 O-ring 100 534-02 2 49 Thrust washer 305 402-01 2 50 Stop washer 307 048-01 Swivel, complete 305 401-60 Swivel, complete with Swedish coupling -32 305 401-61 1) Items 12 and 13 are supplied together and included in item 19. 2) Included in service set 59 477-000. Not sold separately. 6 3) Included in service set 59 477-000. Also available separately. 4) Only for the 175/450 litre/min version.

59 481/482 Ø56 andifighter II andifighter is a nozzle for all extinguishing purposes except advanced entry into buildings by fire-fighters with breathing apparatus. Technical description Materials: Extension tube of plastic-coated aluminium. O-rings of nitrile rubber. Grip sleeve of impact-resistant acetal plastic. Buffer of EPM rubber. Metal parts of AMETA. AMETA is the dezincification resistant alloy of TA ydronics. Maximum working pressure: 160 mwg = 16 bar Flow: 60, 75, 100 or 150 l/min (respectively) at 6 bar. Marking: 59 481/483: orange grip sleeve, marked 7 mm. 59 482/484: red grip sleeve, marked 10 mm. Service: The O-rings should, on a regular basis, be lubricated with a suitable lubricant. Function Turning the grip sleeve from closed position will give a spread spray pattern. The jet is broken up into very small droplets by a toothed ring, for efficient fire-fighting and less water damage. Turning the sleeve further progressively changes the spray pattern to a concentrated jet. These actions require only one hand grip. The jet opens with a spread pattern for maximum safety. Full flow is achieved after turning the grip sleeve about 45, after further turning the flow rate remains constant from the spread pattern to the closed jet. The valve seat has a soft seal for reliable closure. 59 483/59 484: Identical to the 59 481/59 482, but with the addition of an outlet for fitting a nipple for test pressurising of, egs, fire hydrants. This outlet has a G1/8 thread, and is fitted with a plug on delivery. Ø56 Ø56 59 481/482 59 483/484 Version TA No 6 mm (60 l/min/6 bar) ose nipple, 19 mm 59 481-126 135 ose nipple, 19 mm 59 483-126 147 7 mm (75 l/min/6 bar) ose nipple, 19 mm 59 481-120 135 Male thread G3/4 59 481-020 120 Swedish coupling 32 59 481-032 132 ong, female thread G3/4 59 481-220 215 ong, male thread G1 59 481-225 225 ong, Swedish coupling 32 59 481-232 227 ose nipple, 19 mm 59 483-120 147 Version TA No 8 mm (100 l/min/6 bar) ose nipple, 25 mm 59 482-128 135 ose nipple, 25 mm 59 484-128 147 10 mm (150 l/min/6 bar) ose nipple, 25 mm 59 482-125 135 Male thread G3/4 59 482-020 120 Swedish coupling 32 59 482-032 132 ong, female thread G3/4 59 482-220 215 ong, male thread G1 59 482-225 225 ong, Swedish coupling 32 59 482-232 227 ose nipple, 25 mm 59 484-125 147 7

Flow Throw l/min m Pressure mwg bar TA No 59 481/483, 6 mm (60 l/min/6 bar) 59 481/483, 7 mm (75 l/min/6 bar) Pressure mwg bar 59 482/484, 8 mm (100 l/min/6 bar) 59 482/484, 10 mm (150 l/min/6 bar) 8

Nozzles As with all other fire-fighting hardware from TA, the one-piece jet unit is robust and reliable. It is widely recognised that even very slight deformation of a nozzle can degrade its performance. The removable nozzles on the jet have excellent durability and resistance to scratches, knocks and heavy blows. The shut-off seal is almost impossible to wear out - the seal is oversized and adaptable. Technical description Materials: PRESSA (light metal): cast bodies; hot-forged connection parts and handle. Ball in the 59 461 of reinforced plastic. Spindles of hard chrome-plated brass. Removable nozzles of orange-coloured acetal plastic. Maximum working pressure: 200 mwg = 20 bar. Surface treatment: ight metal parts anodised. Body painted with red epoxy paint. 59 461 as a removable nozzle for a 7 mm jet. The fixed nozzle provides a 10 mm jet. 59 462 With two removable nozzles for 7 and 10 mm jets. Fixed nozzle gives a 14 mm jet. AA 461 AA 461 Connection TA No Swedish coupling 32 59 461-032 115 100 ose nipple 20 59 461-420 150 87 ose nipple 25 59 461-425 150 87 Female thread G1 59 461-532 103 87 Connection TA No Swedish coupling 32 59 462-032 348 110 Female thread G1 59 462-532 340 110 59 463 With three removable nozzles for 10, 14 and 18 mm jets. Fixed nozzle gives a 22 mm jet. Removable nozzles Complete set, including seals. For TA No 59 461-032 7 mm 59 468-007 59 462-032 7 och 10 mm 59 468-000 59 463-063 10, 14 och 18 mm 59 469-000 AA 461 Seal sets Contents: see marking under Parts included on pages 10-11. Connection TA No Version TA No Swedish coupling 63 59 463-063 490 155 Male thread G2 59 463-563 470 140 For 59 461-032 7 mm 59 464-461 For 59 462-032 7 och 10 mm 59 464-462 For 59 463-063 10, 14 och 18 mm 59 464-463 9

Capacity for concentrated and spread jets 59 462-032 59 461-032 59 462-032 Nozzle diameter, mm 14 10 7 Water flow rate l/min at 6 bar Closed jet 310 160 80 Spread jet 290 160 80 Nozzle diameter, mm 59 463-063 22 18 14 10 Water flow rate l/min at 6 bar Closed jet 750 500 310 160 Spread jet 550 430 290 160 Components parts Nozzles 59 461 Stop screw 4462 13-32 Spindle 300 502-01 Cover 4461 04-01 andle screw100 195-01 andle 4461 06-01 Fixed nozzle Ø10 300 497-01 Nozzle incl seal 59 468-007 *O-ring 100 520-02 Washer COROPRENE 59 426-001 *Seal 4461 09-01 *O-ring 100 520-15 *) Included in sealing set 59 464-461 Control ball 300 501-01 Swedish coupling section 300 459-02 Valve housing 4461 01-01 10

Parts included - One-piece jet units 59 462 Fixed nozzle Ø14 4462 21-32 Washer 4462 28-32 Outer spindle 4462 04-32 *ock ring 4462 05-32 Inner spindle 4462 03-32 Stop screw 300 527-01 *Seal 4462 14-32 andle screw 4462 12-32 Cover 4462 06-32 *O-ring 100 520-07 andle 4462 11-32 Roller 301 128-01 *O-ring *O-ring Nozzle set 59 468-000 Intermediate piece 4462 10-32 *O-ring Grip section 301 217-60 Ball cock 4462 02-32 Cylindrical pin 4462 09-32 Swedish coupling section 300 459-02 Gasket COROPORENE 59 426-001 Valve housing 301 022-60 incl lock ring Spreader 4462 07-32 *) Incl in seal set 59 464-462 59 463 andle 4462 11-63 Non-specified, see 59 462 Threaded section 300 479-02 Ring 300 440-02 Nozzle set 59 469-000 Fixed nozzle Ø22 4462 21-63 *Seal 4462 14-63 Grip section 301 218-60 Intermediate piece 4462 10-63 *O-ring Spreader 4462 07-63 Washer 59 427-001 Valve housing 301 023-60 incl lock ring *) sincluded in seal set 59 464-463 Ball cock 4462 02-63 11

Fire hydrant valves 59 415, 59 416, 59 437 and 59 455 are of globe valve type. The valves are self-draining and therefore frost-safe. They have a removable bonnet, screwed into the valve body. Bonnets incorporate a substantial spanner flat. ydrant valves with SMS numbers conform to Swedish Standards in all respects. 59 457 is of ball valve type, and is easily operated by an impact-resistant plastic handle: fully closed to fully open takes 90. Technical description Materials: Cast bodies, hot-forged or diecast bonnets, hot-forged connection parts. 59 415: Gunmetal 59 416: Gunmetal 59 437: PRESSA (light metal) 59 455: Gunmetal 59 457: AMETA. iecast body and cover. Rubber segments of EPM rubber. AMETA is the dezincification resistant alloy of TA ydronics. Maximum working pressure: 200 mwg=20 bar 160 mwg=16 bar (59 457). 160 Surface treatment: Valve body painted in red epoxy paint. ight metal surfaces anodised. Valve body and cover nickel-plated (59 457). Seat seal: Rubber seal. 265 270* 59 437-065, incl coupling 63 on outlet 59 437-565, male G2 1/2, excluding coupling. 1 NV 1 NV 1 NV 59 415 59 416 59 455 59 457 1 NV TA No SMS Outlet Inlet 1 * 1 1 NV Thread length 59 415-050 1164 Swedish coupling 63 Female thread G2 100 215 60 85-72 22 59 415-065 1164 Swedish coupling 63 Female thread G2 1/2 120 265 75 100-90 25 59 415-550 1164 Male thread G2 Female thread G2 100 215 60 63-72 22 59 415-565 1164 Male thread G2 1/2 Female thread G2 1/2 120 265 75 81-90 25 59 416-050 1165 Swedish coupling 63 Female thread G2 90 250-235 175 72 19 59 416-065 1165 Swedish coupling 63 Female thread G2 1/2 100 280-285 205 90 20 59 416-550 1165 Male thread G2 Female thread G2 90 250-235 150 72 19 59 416-565 1165 Male thread G2 1/2 Female thread G2 1/2 100 280-285 185 90 20 59 455-025 1458 Swedish coupling 32 Female thread G1 70 155 45 50-42 16 59 455-032 1458 Swedish coupling 32 Female thread G1 1/4 90 175 50 55-52 18 59 455-040 1458 Swedish coupling 32 Female thread G1 1/2 90 185 50 55-60 20 59 455-525 1458 Female thread G1 Female thread G1 70 155 45 36-42 16 59 455-532 1458 Female thread G1 Female thread G1 1/4 90 175 50 32-52 18 59 455-540 1458 Female thread G1 Female thread G1 1/2 90 185 50 32-60 20 59 457-025 - Swedish coupling 32 Female thread G1 59 69-103 - 41 19 59 457-032 - Swedish coupling 32 Female thread G1 1/4 79 87-122 - 50 21 59 457-120 - ose nipple Female thread G3/4 59 63-115 - 32 12 20 mm 59 457-125 - ose nipple Female thread G1 59 69-126 - 41 19 25 mm *) With valve open 12

Couplings Couplings have threaded connectors for fitting to fire hydrant valves. They fit the 32 mm or 63 mm hose couplings. All couplings conform to the Swedish Standard and are supplied complete with seals. They are used for the fitting of dividers, fire hydrant heads, and valves etc. NB: Always vent beneath the seal when replacing a seal. Technical description Materials: PRESSA (light metal) or brass. Maximum working pressure: 200 mwg = 20 bar. Surface treatment: All light metal parts anodised. Cover chain 59 436 of stainless steel. The Swedish coupling -32 on the 59 444 adapter is chrome-plated. 1 1 Ø1 Ø1 59 425/59 435 59 424/59 434 59 436 1 1 Ø1 Ø1 Ø1 59 444 59 450 59 451 59 460 *59 426 59 427 TA No Material SMS Connector 1 1 Thread length 59 424-040 Brass 1157 63 x female thread G1 1/2 106 42 20 59 424-050 Brass 1157 63 x female thread G2 106 42 20 59 424-065 Brass 1157 63 x female thread G2 1/2 106 44 25 59 434-050 PRESSA (light metal) 1157 63 x female thread G2 106 42 23 59 434-065 PRESSA (light metal) 1157 63 x female thread G2 1/2 106 44 25 59 425-040 Brass 1158 63 x male thread G1 1/2 106 27 16 59 425-050 Brass 1158 63 x male thread G2 106 23 21 59 425-065 Brass 1158 63 x male thread G2 1/2 106 21 23 59 435-050 PRESSA (light metal) 1158 63 x male thread G2 106 23 21 59 435-065 PRESSA PRESSA (light metal) 1158 63 x male thread G2 1/2 106 21 23 59 436-000 PRESSA (light metal) 1175 63-106 32-59 436-600 Brass 63-106 32-59 444-000 Brass and PRESSA 1181 63 x 32-106 41-59 450-020 Brass 1179 32 x female thread G3/4 62 23 13 59 450-025 Brass 1179 32 x female thread G1 62 23 9 59 450-032 Brass 1179 32 x female thread G1 1/4 62 41 18 59 450-040 Brass 1179 32 x female thread G1 1/2 62 43 20 59 451-020 Brass 1180 32 x male thread G3/4 62 23 10 59 451-025 Brass 1180 32 x male thread G1 62 23 10 59 451-032 Brass 1180 32 x male thread G1 1/4 62 41 18 59 451-040 Brass 1180 32 x male thread G1 1/2 62 23 20 59 460-000 Brass 1175 32-62 34-59 426-001 Chloroprene rubber 1183 32 - - - - 59 427-001 Chloroprene rubber 1153 63 - - - - *) The seal differs from SMS 1183 in that the inner diameter is larger, for a lower pressure drop. It is, however, fully interchangeable with SMS 1183. 13

ose couplings 32 mm and 63 mm hose couplings comply with the Swedish Standard. Supplied in pairs, complete with seals. Technical description Materials: 59 423: ot-forged and turned brass. ocking mechanism of stainless steel. 59 433: ot-forged and turned PRESSA (light metal). ocking mechanism of stainless steel. 59 442: PRESSA (light metal): hot-forged. 59 452: ot-forged brass. Maximum working pressure: 200 mwg = 20 bar. Surface treatment: All light metal parts anodised. Pressure drop, bar 300 l/min 400 l/min 500 l/min 59 442-038 0,04 0,11 0,20 59 452-038 0,04 0,11 0,20 59 442-042 0,09 0,16 0,25 Values given are the effect of the coupling set on the pressure drop in the hose. 1 1 Ø1 Ø2 Ø1 Ø2 59 423/59 433 59 442/59 452 TA No Material SMS Connector 1* 2 1 59 423-038 Brass - 63 38 106 195 37 59 423-051 Brass 1150 63 51 106 181 40 59 423-063 Brass 1150 63 63 106 181 40 59 433-038 PRESSA (light metal) - 63 38 106 195 37 59 433-042 PRESSA (light metal) 1150 63 42 106 195 37 59 433-051 PRESSA (light metal) 1150 63 51 106 181 51 59 433-063 PRESSA (light metal) 1150 63 63 106 181 43 59 433-076 PRESSA (light metal) 1150 63 76 106 209 54 59 442-038 PRESSA (light metal) 1176 32 38 62 112 42 59 442-042 PRESSA (light metal) 1176 32 42 62 112 42 59 452-020 Brass 1176 32 20,5 62 112 42 59 452-025 Brass 1176 32 26 62 112 42 59 452-032 Brass 1176 32 32 62 112 42 59 452-038 Brass 1176 32 38 62 112 42 *) Figures indicate the internal diameter of the pressure hose. 14

ivider 59 441 A complete divider with high capacity at low pressure drop. It is easy to handle and has low weight and well protected controls. Two inlet swivel couplings and valve makes it fit for double or single water intake. Technical description Materials: Body, handle, swivel, bottom plate, balls and couplings of aluminium. Carrying handle / protection bar of steel tube. Stainless steel flap valve, covered with Therbane rubber. Other rubber parts of nitrile or chloroprene rubber. AMETA spindles. AMETA is the dezincification resistant alloy of TA ydronics. Maximum working pressure: 200 mwg = 20 bar. Surface treatment: Aluminium parts anodised and epoxy-painted. Swivel, bottom plate, balls and couplings anodised. Carrying handle / protection bar yellow-galvanised. 233 370 255 Function: The divider has been designed to have the lowest possible pressure drop. It meets demanding requirements in respect of reliable water supply to fire-fighters wearing breathing apparatus. It has double inlets, with swivel couplings which ensure that it is stable and remains upright when pressurised. The swivel couplings allow the hoses unrestricted rotation at low and high pressures. The divider incorporates a stainless steel flap valve to allow the water supply to be changed over on load. This flap valve has been covered with high-performance Therbane rubber, The outlets incorporate easily-operated ball valves with special seal designs, ensuring reliable sealing. The combined carrying handle and protection bar has been ergonomically designed to allow the unit to be carried while rolling out hoses. It also provides effective protection for the unit after setting up. The bottom plate raises the divider from the ground and reduces the risk of dirt finding its way into the hoses. The divider has a G3/8 nipple for connection of a pressure gauge or other item. This nipple is plugged when the unit is supplied. 340 TA No Version 59 441-000 Inlet 2 Swedish coupling 63 Outlet 2 Swedish coupling 32 2 Swedish coupling 63 59 441-500 Inlopp 2 female thread, G2 1/2 Outlet 2 female thread, G1 2 female thread, G2 1/2 15

ividers 59 439: The small hose coupling incorporates easily operated ball valves for significantly lower pressure drop. A protective frame, which also acts as a carrying handle, protects the valve handles and prevents accidental opening or closing of the divider. All metal parts are of aluminium to get low weight. The large hose coupling is of globe valve type. All valves are self-draining. 59 440: This small, handy divider is intended for small diameter hoses. It incorporates a ball valve, with a 90 action handle. The seal is of rubber, and the ball is of floating type, which means that it is easy to dismantle the unit for inspection or replacement of parts. 308 792-60 A divider unit to complement or replace the 59 438 divider. Complete with guard frame and claw coupling. Technical description Materials: 59 439/308 792-60: Entirely of PRESSA (light metal). Plastic-coated handle/handwheels. Guard frame / carrying handle of galvanised steel. 59 440: Entirely of PRESSA (light metal). Maximum working pressure: 200 mwg = 20 bar. Surface treatment: ight metal parts anodised. Body painted in red epoxy paint. Guard frame / carrying handle galvanised. 160 125 90 300 243 Te rm 120...3...4...5..2 152 265 325 265 59 439-000 308 792-60 59 440-232 TA No Version TA No 59 439-000 Inlet Swedish coupling 63 Outlet 2 x Swedish coupling 32 2 x Swedish coupling 63 Without swivel 59 440-032 Inlet Swedish coupling 63 Outlet 2 x Swedish coupling 32 130 Small hose coupling, complete. Fits 59 439-000 (and earlier model 59 438-000) 59 440-525 Inlet Female thread, G2 Outlet 2 x female thread, G1 118 Inlet Swedish coupling 63 Outlet 2 x Swedish coupling 32 192 Inlet Female thread, G2 Outlet 2 x female thread, G1 165 308 792-60 With swivel 59 440-232 59 440-225 16 Version

Fire hydrant heads Fire hydrant heads are normally supplied with a 59 404 foot screw coupling to Swedish Standard. The valve stems run in threaded elrin inserts, ensuring smooth operation. Technical description Materials: 59 430: PRESSA (light metal), cast body, hot-forged couplings. 59 431: PRESSA (light metal), cast body, hot-forged couplings and bonnets, hard-chromed spindles. AMETA. 59 404: PRESSA (light metal), cast. 50 405: PRESSA (light metal), cast. 50 406: Gunmetal, cast. AMETA is the dezincification resistant alloy of TA ydronics. Maximum working pressure: 200 mwg = 20 bar. Surface treatment: All light metal parts, except the standpipe, are anodised. The valve body is epoxy-painted in red. Service: Fire hydrant heads nos. 59 430 and 59 431 Seal for foot screw 300 401-01 Seal for bayonet connector 300 513-01 Seal for quick connector 440 606-63 andle 443 106-63 Screw for handle 100 205-03 Tube 443 105-63 Complete head without tube 59 430 300 430-60 59 431 300 431-60 A + A 431 59 430 59 431 Ø1 W3 3/4 A Ø1 Ø2 59 404 34 59 405 59 406 TA No Assembled SMS 1 2 Internal A foot connection thread length 59 430-000 - - G2 1/2 - - - 208 870 59 430-004 59 404 - - - - - 208 890 59 430-005 59 405 - - - - - 208 898 59 430-006 59 406 - - - - - 208 947 59 431-000 - - G2 1/2 - - - 325 1045** 59 431-004 59 404 1161 - - - - 325 1105** 59 431-005 59 405 1161 - - - - 325 1115** 59 431-006 59 406 1161 - - - - 325 1160** 59 404-000* 300 401-01*** 1166-B G2 1/2 110-21 - 63 59 405-000* 300 513-01*** - G2 1/2 75 95 21 156-59 406-000* 440 606-63*** - G2 1/2 - - 21-120 *) Supplied complete with seal. **) This dimension is with the valve open. ***) Seal only, or spare seal. 17

Spare parts Fire hydrant valves, ividers, Fire hydrant heads. Part- 59 415-065 59 415-050 59 416-050 59 416-065 59 431 59 455-025 59 455-032 number 59 437-065 59 438-000 59 455-040 59 438 Small hose arge hose outlet Parts outlet Complete bonnet 301 335-62 301 334-62 300 420-60 300 421-61 300 419-61 301 331-62 301 332-62 Ball seal 100 571-07 100 570-06 4446 07-50 4431 11-63 4431 11-63 100 570-03 100 570-04 Washer 100 371-07 100 371-06 300 426-02 4401 09-65 4431 07-63 100 371-03 100 371-04 Nut 100 320-03 100 320-03 100 320-03 100 320-03 4431 10-63 100 320-02 100 320-02 andwheel 100 700-15 100 700-13 100 700-11 100 700-12 100 700-12 100 700-07 100 700-09 andwheel screw 100 160-05 100 160-04 301 136-01 100 160-05 301 136-02 100 160-03 100 160-04 Ball seal d T 100 571-07 82 52 11 100 570-03 35 16 7-04 41 21 9-06 66 38,5 9,5 444 607-50 60 12 5 443 111-63 73 12 5 TA ydronics reserves the right to make changes without prior notice. 18

19

TOUR & ANERSSON YRONICS AB QUAITY AN ENVIRONMENT SYSTEM Certification of Registration Number 2125 and 2125 M Certified by SP Quality pays, which is why we work constantly to improve our processes and procedures so that everything that we manufacture and supply is fault-free. This applies to all aspects of our work, from design, development, manufacture and delivery to customer and after-sales service. Feedback from our customers is a vital element, and we have put in place procedures to ensure structured feedback of field experience, providing us with input for improvements and continued product development. In parallel with this quality work, we also pursue an active environmental policy. TA ydronics holds quality and environmental certification to ISO 9001 and ISO 14001. TOUR & ANERSSON YRONICS AB Certification of Registration Number 2125 and 2125 M Certified by SP QUAITY AN ENVIRONMENT SYSTEM Photo: Borås Räddningstjänst, Sweden 01.01 nr 341.234. RESPONSTRYCK, Borås. 033-10 80 90. -001 Int 2001.01 TOUR & ANERSSON YRONICS AB, 524 80 JUNG, Sweden, Tel +46 513 540 00, Fax +46 513 508 44. www.tahydronics.com 20 a subsidiary of IMI plc