THE IDEAL SOLUTION WARE WASH Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
Ware Wash DISHWASH TABLING Dishwash Inlet Tabling grade 304 throughout Worktop 1.5mm thickness g Top and sink bowls soundeadened g One piece construction g 300mm high splashback g 40mm boxed retaining edge to front and end g Basket guide rail over sink g Inlet holes for mixer taps or g Locating lip to fix onto dishwasher Dimensions Fully customised service Sink 600x450x300mm depth (standard), 1.5mm thickness Legs g 40x40mm or 30x30mm section g Fitted with alloy adjustable feet Right / left handed in-line and L shaped designs g Scrapping ring g Utensil / cutlery sink g Mixer taps or g Basket runners underneath g Overhead tray shelf g Sink valance g Integral cupboard(s) g Undershelves shows in-line right handed model with scrapping ring, and baskets under Prices in PRICE LIST page 23 Dishwash Outlet Tabling grade 304 throughout Worktop 1.5mm thickness g One piece construction g 40mm boxed retaining edge to all sides g Locating lip to fix onto dishwasher Legs g 40x40mm or 30x30mm section, fitted with alloy adjustable feet Prices in PRICE LIST page 23 Right / left handed end units, L shaped and bridging designs available g Basket runners underneath g End infill / concealing panels g Splashback 150mm or 300mm g Integral cupboard g Basket overshelf outlet table with freestanding COSHH cupboard and dolly under Coshh Cupboard Freestanding grade 304 1.5mm thickness carcase g Stainless insulated, hinged door Single / Double door models Dimensions Single door = 650x650x850mm high Double door = 1000x650x850mm high Prices in PRICE LIST page 23 Features Option g Hinged, insulated door g Key lockable unit (recessed cylinder lock) g Adjustable stainless cylinder feet to front, castors to rear g Internal, height adjustable, solid shelf / shelves g Recessed handle g Suitable for positioning under dishwash table / worktop g Sliding doors available on double unit g Unit with integral worktop available Scrapping Table g Stainless grade 304 throughout Worktop 1.5mm thickness g Laser cut hole for scrapping ring Dimensions 600x650x875mm high Legs g 30x30 box section + stabilising under frame Prices in PRICE LIST page 20 Features Option g Guides under to locate and centralise bin g Rubber scrapping ring included g Hinged door fitted to front concealing bin under g Mobile base for bin 1 WASH
POT SINKS / CUTLERY SOAK SINK Ware Wash Pot Sinks Single Bowl Worktop grade 304 1.5mm thickness g Heavy duty backing plate g Water retaining edge to front and sides g 75mm splashback as standard g 50mm downturn to sides and rear g 32mm tap holes g Soundproofed top and sink Sink / 600x500x300mm deep waste 32mm waste outlet Undershelf grade 304 1.2mm thickness (solid format) grade 304 30x30mm box (slatted shelf optional) g 40mm downturn to all sides g In absence of undershelf then H frame or 3-sided frame used g Optional splashback to undershelf if required Prices in PRICE LIST page 22 Leg 40x40mm or 30x30mm box section g c/w alloy adjustable, fitted feet as standard g Legs inset 50mm to all sides Lengths 900 / 1000 / 1200 / 1500 / 1600 and 1800mm Depths 650mm and 700mm standard (other depths available) Height 875mm worktop height / 950mm overall including splashback g Undershelf solid or slatted pot shelf g Mixer taps / g Valance fitted to conceal bowls g Right hand / left hand / centre models (to be specified at time of order) g Drainer worktop shows left hand model with solid undershelf Pot Sinks Double Bowl Worktop grade 304 1.5mm thickness g Heavy duty backing plate g Water retaining edge to front and sides g 100mm splashback to rear g 50mm downturn to sides and rear g 32mm tap holes g Soundproofed top and sinks Sinks / 2x 600x500x300mm deep waste 32mm waste outlets Undershelf grade 304 1.2mm thickness (solid format) grade 304 30x30mm box (slatted shelf) g 40mm downturn to all sides g In absence of undershelf then H frame or 3-sided frame used g Optional splashback to undershelf if required Leg Lengths Depths Height 40x40mm or 30x30mm box section g c/w alloy adjustable, fitted feet as standard g Legs inset 50mm to all sides 1500 / 1800 / 2200 and 2400mm 650mm and 700mm standard (other depths available) 875mm worktop height / 950mm overall including splashback g Undershelf solid or slatted pot shelf g Mixer taps / g Right hand / left hand / centre models (to be specified at time of order) g Valance fitted to conceal bowls g Drainer worktop shows right hand model with solid undershelf Prices in PRICE LIST page 22 Cutlery Soak Sink Bowl grade 304 1.5mm thickness tank g Integral drain tap under g Soundeadened Tank dims 600x600x300mm deep Overall 600x600x750mm high dims Leg Features 30x30mm box section g Pre-soak facility accommodating 500x500 baskets g Mobile g Easy access drain tap g Basket runners under g Cutlery chute Prices in PRICE LIST page 22 WASH 2
Ware Wash PREMIER WARE WASH TROLLEYS Dishwash Basket Trolley 7 Tier + 4 Tier Dishwash Basket Dolly 25x25 tube frame construction g One piece formed sides g Stainless trayslides 1.5mm stops to both ends Full height = 7 tier unit Low level = 4 tier Dimensions Full height 700x630x 1700mm high Low level 700x630x 850mm high Loading Maximum load per level = 30 kg Maximum load per unit = 200kg Trayslide 200mm pitch Features g Heavy duty trayslides g 125mm castors, non marking = full height mode; g 50mm castors, non marking = low level Cutlery Sort Trolley 25mm diameter tubular frame g Stainless 8mm wire frames for trays g Plastic cutlery trays 25mm diameter frame and handle g Stainless 1.5mm base Dimensions 670x580x1050mm high Loading 150kg Features g Handle for easy manoeuvrability g Removable st/st solid base g 20mm retaining edges to base g Bumpers fitted as standard g Reduced height T handle to fit under dishwash table Basket / Tray Lowerators base, housing and support tray Dimensions 828x561x969mm high Loading Maximum load 120kg (Load of 65kg upwards, support tray rests at lowest level) Features sealed bearings g Can support 7x 500x500 dishwash baskets @ 100mm high g Push / pull handle g Tray model available (capacity 100 to 120 trays) g Facilitates 460x360 / 480x370 / fast food and 1/1 trays 3 tray unit 2 tray unit + solid removable base / shelf (st/st) Dimensions 630x600x1000mm high Loading 50kg per total unit Features g 2 or 3x removable (4 compartment) cutlery trays g Trays slanted for easy access / sorting Usage g Soiled cutlery collection g Clean cutlery storage / segregation g Extended height model available (4 tiers) Prices in PRICE LIST page 13 3 WASH
PREMIER WARE WASH TROLLEYS Ware Wash Plate Carts one piece back and base g Stainless 25x25mm box section frame g Stainless wire dividers Dimensions Small model = 1125x500x810mm high Large model = 1125x640x810mm high Loading 200 kg max Features g Heavy duty solid base + back g Dividers adjustable @ 85mm increments g c/w bumpers Usage g Storage of plate + gastronorm pans g Clearing of canteen / Dining areas g Ideal within potwash areas Capacity 400 plates @ 200mm diameter 250 plates @ 260mm diameter g Back-to-back model available g Food quality clear cover Serving / General Purpose Trolley grade 304 dished shelves g 25mm diameter stainless steel handles 2 or 3 tier options Dimensions 800 / 900 and 1075mm lengths 500 / 560 and 660mm depths All models 960mm high Loading 50 kg per level Shelf pitch 2 tier models = 590mm 3 tier models = 280mm Features g Soundproofed shelves g Dished, easy to clean surfaces g Fully fabricated unit, TIG welded g Push / pull handles, bumpers fitted as standard Dishwash Basket Drip Dry Trolley 25x25 tube frame construction g One piece formed sides 3 tier = 24 rack 2 tier = 16 rack Dimensions 3 tier = 1000x495x1700mm high 2 tier = 1000x495x1200mm high Loading 24 rack capacity stored over 3 levels (8x 500x500 baskets per level) Features g Racks stored at inclined position to facilitate drip draining g Rear restraining bars to prevent racks from toppling g Optimises storage of racks coming from wash lines g Prevents clutter at wash stations g Easy transportation g Rear and side panels available g Free standing static model Drip Dry Tray Trolley g Stainless 25x25mm box section frame g One piece toothed tray holder -2mm sheet Dimensions 1310x625x1700mm high Capacity 150 trays Features g Trays held upright to aid drying time g Bulk storage / transportation of trays g Bumpers fitted as standard Option g Freestanding static model Prices in PRICE LIST page 16 Prices in PRICE LIST page 16 WASH 4
Ware Wash WASTE MANAGEMENT Waste Collection / Sorting Stations, fully fabricated grade 304 throughout g 1.5mm soundeadened top with laser cut, burr free appertures g 30x30mm box section legs with low level stability frame g Heavy duty easy feed trolley guides under worktop Trolley Stainless 25mm dia tubular frame + handle One piece, wipe clean polymer base All swivel castors 2 or 3 bay centre and wall units (wall units c/w 75mm upstand to rear) Dimensions 2 bay = 1030x600x850mm high 3 bay = 1500x600x850mm high Features g Soundeadened worktop g Easy feed centering system allowing quick full/empty trolley changeover g Promotes waste separation g Removable rubber scrapping rings g Jet wash compatible g Units c/w trolleys suitable for holding plastic refuse sacks or standing bins Prices in PRICE LIST page 20 shows easy feed guide shows 2 bay unit shows 3 bay unit with poly enclosure panels and trayslide shows 3 bay unit g 75mm upstand on wall positioned units g Enclosure panels to sides and rear coloured or stainless steel tubular trayslide fitted to front (front of house use) g Colour pictoral sorting labels Heavy Duty Disposal Bins + Dollys g Polymer bins / High density polymer + metal dollys Square 105 ltrs / 151 ltrs Round 76 ltrs / 121 ltrs Dimensions Square 105 ltrs = 546x546x572mm high Square 151 ltrs = 597x597x730mm high Round 76 ltrs = 500mm dia x 590mm high Round 121 ltrs = 560mm diax700mm high Dolly Square = 440x440x100mm high (fits both square bins) Round = 470mm dia x170mm high (fits both round bins) Dolly 90kg capacity Features g Heavy duty tanks with reinforced rims g Handles to aid lifting g Temp tolerant -29C to +60C g Watertight g Snap on lids available g Grey / red / yellow / white colourways Prices in PRICE LIST page 18 square 151 ltr and round 121 ltr models shown Recycling Bins / Waste Disposal g Polymer bins and lids Untouchable bin + lid Slim Jim bin + lid untouchable (left) and slim jim (right) Dimensions Untouchable = 375x375x825mm high Slim Jim = 510x280x830mm high Bin 87 ltrs (both models) capacity Features g Efficient size and shape for tight spaces g Durable finish g Temp tolerant -29C to +60C g Watertight g Lids allow waste to be kept out of sight g Hygienic no touch use g Grey / red / yellow / white colourways Prices in PRICE LIST page 18 5 WASH