Power Threading Machine / Model Pipe: - 2 (mm - 0mm), 2 / 2-4 (62mm - 00mm). 4-6 (00mm - 0mm) with 4 and 6 Rod: - 2 (6mm - 0mm) Motor: / 2 HP, Single-phase, 20V or V, 2-60Hz, Reversible Universal motor. Switches: FOR/OFF/REV Integral safety foot switch. Chuck: RIDGID speed chuck with replaceable rocker-action jaw inserts. Rear Centering Device: Cam action, turns with chuck. Spindle Speed: 6RPM standard (no load). Die Head: Model 8-A or 8-A Dies: / 2 - BSPT/NPT, - 2 BSPT/NPT Cutter: Model 820 Reamer: Model 4 Oil: Litres Thread Cutting Fluid. AH928 Model Kg AH928 / 2-2 0V, NPT.9 AH960 / 2-2 20V, NPT 6.6 AH962 / 2-2 20V, BSPT Power Threading / Model 224 Pipe: /4-4, 4-6 with 6 Geared Threader Bolt: /4-2 (6mm - 0mm) up to 0 Rockwell C Motor: /2 HP, Single-phase, 0Hz, induction type. Motor Control: Reverse/Off/Forward, heavy-duty, rotary-type and integral foot switch. Spindle Speed: 6/2RPM Gear Box: Two-speed gear box :ratio. Chuck: Hammer-type with replaceable rocker-action jaw inserts. Rear Centering Device: Cam action. Cutter: Model 64 full-fl oating, self-centering /4-4 with F-229 cutter wheel. Reamer: Model 44, /4-4 blade-type. Oiling: Through-die head. Pump: Self-priming, geroter-type, automatic-reversing, constant-fl ow. Die Head: Model 9() /4-2 ; Model 94(4) 2/4-4 Dies: set each /2 - /4, - 2 and 2/2-4 HS dies. Tools and Equipment: 4 Hex keys, heavy-duty F-299 cutter wheel, /4 combination wrench, tool box. Oil: Litres Thread Cutting Fluid. AH2609 Model Kg AH2609 224 / 2-4 NPT 240V 60Hz 2.00 AH262 224 / 2-4 BSPT 0V 60Hz 2.00 AH442 224 / 2-4, NPT 220V 0Hz 2.00 Model 00 Compact Threading Machine The 00 Compact featuring /8-2 capacity is an improved version of the world s top selling threading machine the enormously popular RIDGID 00-A. The 00 Compact utilizes the same key drive components and produces even higher quality threading and performance levels. The new 00 Compact features a quieter operation, lightweight and compact design, plus an integral oil and chip pan. Pipe: /8-2 (mm-0mm) Bolt: /4-2 (6mm-0mm) Motor: /2HP, 0 watt no-load universal 2-60 Hz (either 20V or V models available) Motor Control: Push-button On/Off switch Spindle Speed: 8 RPM Chuck: Hammer-type with replaceable, rocker-action jaw inserts. Rear Centering Device: Cam Action. Oiling System: Through-the-head, with an integral oil reservoir. Self-priming, constant-fl ow, geroter pump. AH42 Die Head: Model 8A, /8-2, Quick Opening. Reamer: Model 44, /8-2. Cutter: Model 60, /8-2 full fl oating, self-centering with E-02 Cutter Wheel. Dies: set /2 - /4 & set - 2. Oil: Litres Thread Cutting Fluid. Model Ib. kg Machines AH42 00 Compact /2-2 BSPT, 20V, 2-60 Hz 2,0 AH4482 00 Compact /2-2 NPT, 20V, 2-60 Hz 2,0 Head Office: Block 80, King George s Avenue #0-24 Singapore 20080. Tel: 6296 069 (0 lines) 6292 28 Fax: 629 0024 Branch Office: 2 Tuas Basin Link Singapore 6882 Tel: 626 888 (0 lines) Fax: 626 62
Power Threading Machine / Model 2 The Model 2 - machine weighs only 6 kilograms - the lightest threading machine in the world. A new designed receding die head with specially ground die produces clean,smooth, and accurate threads. The new die head features quick and simple adjustments for the thread length and depth. A powerful HP motor allows the 2 to operate effi ciently, even in low voltage environments. Pipe: - (6mm - mm) Bolt: /8-2 (0mm - 0mm) Motor: HP, Universal 0-60Hz AH220 Motor Control: Reverse/Off/Forward, heavy duty, rotary type plus integral footswitch. Spindle Speed: 6RPM Chuck: Hammer-type with replaceable, rocker-action jaw inserts. Rear Centuring Device: Cam action. Oiling System: Adjustable fl ow; through-the head, with an integral oil reservoir, self-priming, constant-fl ow, geroter pump. Die Head: Model 8A, /8-2, Self Opening. Model 928, 2/2 -, Self Opening Receding. Reamer: Model 4, /4 -, -Fluted. Cutter: Model 6, /4 -, self-centering with E-02 Cutter Wheel. Dies: set /2 - /4 / set - 2 / 2/2 - High Speed. Oil: Litres Thread Cutting Fluid. Model AH220 2 AH4 2 / 2 - BSPT, 20V, 0-60Hz / 2 - NPT, 20V, 0-60Hz lbs. kg. 2 6 20 4 Power Threading / Model 00A Pipe: /8-2, 2/2-4 (62mm - 00mm). 4-6 with 4 and 6 geared threaders. Rod: /4-2 (6mm - 2mm) Stand: Model 206 Motor: Universal, /2 HP Reversible motor, Single-phase, 20V or V, 2-60Hz. Switches: Recessed FOR/OFF/REV Integral safety foot switch. Chuck: RIDGID speed chuck. Rear Centering Device: Cam operated. Spindle Speed: 8RPM (motor for, or 08 RPM available). Die Head: Model 8-A Die: /2 - /4 BSPT/NPT, - 2 BSPT/NPT Cutter: Model 60 Reamer: Model 4 Carriage: Model with 2 Lever Oiler: Model 48 (00C), Model 0 (00A) Oil: Litres Thread Cutting Fluid, 2 Transporter. AH4860 Model Kg AH4860 00 only 20V, 2-60Hz 4 AH9420 00A Complete 20V, BSPT 9.6 AH94 00A Complete 20V, NPT 9.6 Hydraulic Roll Groover / Model 98 The RIDGID 98 Hydraulic Roll Groover features a powerful ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 98 is the ideal groover for job-site requirements. Designed to provide maximum versatility, the 98 is capable of grooving up to 2 Schedule 0 thin wall and 8 Schedule 40 standard wall pipes. Groove and drive roll changeout is accomplished in seconds. A unique spindle lock feature assists roll change-out using tools. - 8 Schedule 40 steel -2 Schedule 0 Steel Roll set for 2-6 Schedule 0/40. Roll set for 8-2 Schedule 0 and 8 Schedule 40. Tool Box, Hex Key, Box Wrench. Adapts to RIDGID 00, 00 Compact,, 822, 2 and 224 Threading Machines. Optional drive and groove roll sets available for Schedule 0/40 /4 - /2 Schedule 0/40 2-6 Copper 2-6 Schedule 80 PVC AH4829 Model Kg AH4829 98-98 Roll Groover w/00 Power drive Mount Kit 4.2 AH48 98-2 98 Roll Groover w/822 Carriage Mount Kit 60.9 AH4882 98-4 98 Roll Groover w/224 Carriage Mount Kit 9. AH488 98-98 Roll Groover w/ Carriage Mount Kit. AH4222 98 98 Roll Groover only 4.0 8 Head Office: Block 80, King George s Avenue #0-24 Singapore 20080. Tel: 6296 069 (0 lines) 6292 28 Fax: 629 0024 Branch Office: 2 Tuas Basin Link Singapore 6882 Tel: 626 888 (0 lines) Fax: 626 62
Power Threading / Model 00 Heavy-duty hand-held power drive Features reversible Universal motor - 2 (6mm -0mm) pipe Designed for RIDGID 2-R die heads. Other RIDGID die heads (OO-R, OORB, -R) using adapters, threading 2 / 2 through 6 (62mm - 0mm) with 4/6 geared threaders. Motor: Universal / 2 HP, 20V or V, 2-60Hz. Switch: Heavy-duty trigger on/off with separate top mounted slide switch for forward/reverse selection. Gear Head: All-spur gear reduction. Spring loaded adapter pawl. Hardened steel spindle gear. Body: Cast aluminum Support Arm: No AH4940 AH49 AH4940 Model 00 00 V 260Hz 20V 260Hz Max. Geared Pipe Threading Rod Threading Threader Cap. in. mm in mm in mm kg 2 2 0 0 62 62 6 6 0 0 4 4 Exposed Ratchet Threaders Die heads lock into ratchet assembly and are removed by pulling out the ratchet knob. Ratchet handle included. Model Number in. mm NPT BSPT NPSM BSPP kg OO-R / 2-2-2 AH64 6 680-4. OO-R - 0-2 AH6 - - -. OO-R - -2 AH6 620 - - 6.2 2-R / 2-2-2 AH6480 - - - 0.8 2-R / 2-2 2-0 AH64 62 60 -.8 2-R -2-0 AH60 628 - - 20. AH60 Pipe Die High Speed Steel Alloy Steel BSPT & NPT AH4 AH440 AH44 AH40 AH4 AH480 AH48 AH490 AH666 AH66660 AH6666 AH6660 AH660 AH66 AH6680 AH48 AH642 AH2692 Size NPT-Alloy - NPT-Alloy / 2 - NPT-Alloy - 2 NPT-Alloy HSS - NPT-HSS / 2 - NPT-HSS - 2 NPT-HSS BSPT-Alloy - BSPT Alloy / 2 - BSPT Alloy - 2 BSPT Alloy BSPT-HSS - BSPT-HSS / 2 - BSPT-HSS / 2 - BSPT-HSS 2 / 2-4 BSPT-HSS 2 / 2-4 NPT-HSS AH4 Power Threading / Receding Threaders 4 threaders 2/2,, /2, 4 pipe with one set of dies. 6 threaders 4, 4/2,, 6 pipe with one set of dies. Jaw clutch prevents jamming Simple adjustment for tapered or straight threads Cam-type workholder sets instantly Fully enclosed gearing Right-hand only AH680 Cap. Normal Model Pipe Size in mm Kg AH680 4 BSPT with set High-Speed Dies 2 / 2-4 62-00 42. AH6620 4 NPT with set High-Speed Dies 2 / 2-4 62-00 42. AH68 6 BSPT with set High-Speed Dies 4-6 00-0.8 AH660 6 NPT with set High-Speed Dies 4-6 00-0.8 AH980 D-440 Ratchet and Handle - - 4. AH962 - Metal Carrying Case for 4 - -. Geared Threader Head Office: Block 80, King George s Avenue #0-24 Singapore 20080. Tel: 6296 069 (0 lines) 6292 28 Fax: 629 0024 Branch Office: 2 Tuas Basin Link Singapore 6882 Tel: 626 888 (0 lines) Fax: 626 62 9
Die Heads For All 2 Threading Machines Power TOOLS 8A Self-Opening Die Head 8A Universal Die Head Die Head and 2 Bolt Die Heads Model How Thread Oil Thru Dies Pipe Bolt Replaces Opened Direction Head Used Cap. Cap. Kg Machine BSPT Die Heads (Less Dies) AH900 8A Brit. Universal Q.O. RH Yes Univ. - 8-2 8/84, AH9080 8A Brit. Universal S.O. RH Yes Univ. - 8-2 8/84,9 AH229 86 Brit. Universal Q.O. LH Yes Univ. - 8 842, Machine Bolt Die Heads (Less Dies) AH904 Bolt Q.O. RH/LH Yes 00B - 00B,4 AH900 2 Bolt Q.O. RH/LH Yes 00B - 2 00B 4, Machine NPT Die Heads (Less Dies) AH906 8A Universal Q.O. RH Yes Univ. - 2-2 8/84, AH90 8A Universal S.O. RH Yes Univ. - 2-2 8/84,9 AH2282 842 Universal Q.O. LH Yes Univ. - 2 842, AH049 Q.O. RH Yes Dual / Bolt -,8 Machine Mono Die Heads AH4204 00A Mono Q.O. RH Yes Mono *, AH4202 00A Mono Q.O. RH Yes Mono *,2 AH420 00A Mono Q.O. RH Yes Mono *,2 AH42062 00A Mono Q.O. RH Yes Mono / 2 *, AH4206 00A Mono Q.O. RH Yes Mono *, AH4202 00A Mono Q.O. RH Yes Mono *,6 AH420 00A Mono Q.O. RH Yes Mono *,6 AH42082 00A Mono Q.O. RH Yes Mono / 2 *,9 AH4208 00A Mono Q.O. RH Yes Mono 2 *,9 * 00-00A--800-80-802-822 Machines and 00 and 00-A w/carriage. Q.O. = Quick-Opening - Manually fl ip throwout lever to retract dies when thread length is cut. S.O. = Self-Opening - Trigger foot automatically retracts dies when thread length is cut. 8A Die Head replaces the 8 and 84 Die Heads. 8A Die Head replaces the 8 and 84 Die Heads. 00A Die Heads replaces the 00 Mono Die Heads. Die Head replaces. Note: British Die Heads use British Dies only Note: and 2 Die Heads replace 00B Die Head. Individual Machine Die Heads do not include dies. 60 Head Office: Block 80, King George s Avenue #0-24 Singapore 20080. Tel: 6296 069 (0 lines) 6292 28 Fax: 629 0024 Branch Office: 2 Tuas Basin Link Singapore 6882 Tel: 626 888 (0 lines) Fax: 626 62
Bolt Dies for Universal Die Heads (Nos. 04A,, 8A, 8A, 842, 86, 9 and 9 Die Heads) (BSW) (UNC) (UNF) Rod Size TPI RH High-Speed Rod Size TPI RH High-Speed Rod Size TPI RH High-Speed - 20 /6-8 /8-6 /2-2 *AH6880 *AH688 *AH6890 *AH6900-20 /6-8 /8-6 /6-4 /2 - AH482 AH48220 AH4822 AH4820 AH482-28 /8-24 /6-20 /2-20 AH4829 AH480 AH480 AH48 9 /6-2 /8 - /4-0 /8-9 - 8 *AH690 *AH690 *AH69 *AH6920 *AH692 9 /6-2 /8 - /4-0 /8-9 - 8 /8 - AH48240 AH4824 AH4820 AH482 AH48260 AH4826 9 /6-8 /8-8 /4-6 /8-4 - 4NS - 2 AH4820 AH482 AH480 AH48 AH4840 AH48 /4 - /2-6 2-4 /2 *AH69 *AH694 *AH69 /4 - /4-6 /2-6 /4-2 - 4 /2 AH4820 AH482 AH48280 AH4828 AH48290 /8-2 /4-2 /8-2 /2-2 AH484 AH480 AH48 AH4860 *Requires British Model Die Head Bolt Dies for 00B and, 2, 4 and 42 Die Heads (BSW) Rod Size TPI /8-6 /6-4 /2-2 /8 - /4-0 /8-9 - 8 /8 - /4 - /8-6 /8 - /8-4 /2 RH High-Speed AH66 AH6620 AH662 AH66 AH6640 AH664 AH660 AH66 AH6660 AH666 AH66 AH668 Rod Size TPI /8-8 /4-8 /8-8 /2-8 /4-8 /8 2-8 2 /2-8 (8 UN) RH High -Speed AH492 AH49220 AH4922 AH4920 AH49240 AH4924 AH4920 For use with, 4 and 00B /4 Die Heads For use with 2, 42, 00B /8-2 Die Heads Head Office: Block 80, King George s Avenue #0-24 Singapore 20080. Tel: 6296 069 (0 lines) 6292 28 Fax: 629 0024 Branch Office: 2 Tuas Basin Link Singapore 6882 Tel: 626 888 (0 lines) Fax: 626 62 6
Model 28 / 28XL 8-2 Power Pipe Cutter Power TOOLS The new RIDGID 28XL increases pipe cutting capacity from 8 to 2. Utilizing the same displacement type cutter wheel technology, the patented design noe enables larger diameter pipe to be cut to length. The 28XL also incoporates the RIDGID 00 Power Drive to rotate the general purpose cutter wheel. Now one person can easily cut 2 schedule 40 pipe in minutes. New accessories expand 28 and 28XL applications. A thin wall pipe wheel has been developed to cut schedule 0 pipe, even stainless steel. The thinner profi le wheel along with limited wheel pressure ensures a clean cut without deforming the outside diameter. With the addition of a transport cart that quickly attaches to either the 28 or 28XL, on-site mobility is improved. Model 28 28 cutter with hydralic ram Two speed foot pump and hose Pipe support with ball transfer head (two) General purpose cutter wheel for 2 / 2-8 Schedule 40 steel and galvanized pipe or rigid conduit. Adapter for 00 Power Drive Net weight 0 Ibs. (0 kgs) Accessories RIDGID 00 Power Drives - V or 20V, 2-0 Hz, UL Listed - V 2-60 Hz (CSA Approved) Additional pipe support with transfer heads Two wheeled transport cart. Cutter wheel for thin wall (Sch. 0) pipe. 28 Pipe Cutter showing Low Ball Transfer Heads and Model 00 Power Drive in place. Model 28XL 28XL cutter with hydralic ram Two speed foot pump and hose Pipe support with ball transfer head (two) General purpose cutter wheel for 8-2 Schedule 40 steel and galvanized pipe or rigid conduit. Adapter for 00 Power Drive Net weight 4 Ibs. (66kgs) Accessories RIDGID 00 Power Drives - V or 20V, 2-0 Hz, UL Listed - V 2-60 Hz. CSA Approved. Additional pipe support with transfer heads Two wheeled transport cart. Cutter for thin wall pipe. AH06 AH822 Model lb. kg AH06 28 2 /2-8 Power Pipe Cutter 9 4 Model lb. kg AH822 28XL 8-2 Power Pipe Cutter 80 Model HC-40 Hole Cutting Tool The RIDGID HC-40 is designed to quickly and easily cut to 4/4 diameter holes in steel piping. This allows for use of Mechanical T s, Vic-Let, and welded saddles. The RIDGID HC-40 mounts on pipe up to 8 diameter in either the vertical or horizontal position. A unique rotating vial ensures accurate set-up as well as repeated hole aligment. Two feed handles and dual safety switches allow for either left-or right-hand opertation. Features Cuts through 4/4 holes in steel pipe Provides the horsepower and speed to maximize hole saw performance Allows left-and right-hand operation Easily mounts to pipe Ensures repeated hole aligment AH92 AH9 AH6902 AH690 AH692 AH69 AH6922 AH692 Model HC-40 HC-40 R 2A R 40A R 44A R 6A R 2A 24 4 /4 Hole Cutting Tool, 0V 4 /4 Hole Cutting Tool, 220V Integral Hole Saw with Arbor 2 Hole Saw with Arbor 2 /2 Hole Saw with Arbor 2 /4 Hole Saw with Arbor /2 Hole Saw with Arbor 4 /2 Hole Saw with Arbor 2-4 /2 Hole Saw with Arbor Kit lb. kg 42.0 42.0 0.6 0. 0.8 0.9.2 6.0 9.0 9.0 0. 0. 0.4 0.4 0. 2. Specifi cations Chuck speed:0 rpm Hole capacity : to 4/4 Drill chuck capacity:/8 to /8 Pipe clamping capacity:/4 to 8, 2 HP amp motor AH9 Accessories All jobber drills and hole saws Integral arbor hole saws recommended for over 2 diameter (see table) 62 Head Office: Block 80, King George s Avenue #0-24 Singapore 20080. Tel: 6296 069 (0 lines) 6292 28 Fax: 629 0024 Branch Office: 2 Tuas Basin Link Singapore 6882 Tel: 626 888 (0 lines) Fax: 626 62