WINDROW ELEVATORS ENGINEERED INNOVATION
The road to success starts with the right windrow elevator. When there is a long road to pave, and you need to get the job done quickly, turn to the Weiler E650C and E550C windrow elevators. With a proven high-slat entry position and operator accessible chain speed and direction control, these rugged, feature-packed units help lead the way to high-production paving. The road to success starts with the right windrow elevator, and Weiler windrow elevators are designed to handle the toughest conditions while exceeding expectations. RELIABLE, DURABLE ENGINE The Cat C4.4 Tier 4 engine with 137 hp (102 kw) produces clean, quiet power. HIGH-TORQUE, DIRECT DRIVE MOTOR ELIMINATES GEARBOX The elevator is powered by a high-torque, direct-drive motor which eliminates a gearbox and is kept cool by a loop flush return system. HIGH-SLAT ENTRY TACKLES TALL WINDROWS The high-slat entry enables the machine to tackle tall windrows laid by belly dump trucks on high-production or wide-width jobs. The optional transport axle simplifies transportation of the E650C or E550C windrow elevator. The axle and tires are rated at 22,500 lb (10 205 kg) and can tow the elevator at highway speeds. The axle quickly pins on and off the elevator and includes a hydraulic tongue for convenient hook-up to the tow vehicle. The axle without the elevator can be moved via skid steer, loader bucket or pintle hitch pulled by a truck, to move from one end of the jobsite to the other.
The standard sliding hitch (left) allows for toolless, easy paver hook-up. The optional hydraulic push pin frame (right) is available on both the E550C and E650C.
E550C 121 (3073 mm) wide throat delivers high production Independently control the height of each side of the machine 60 (1524 mm) conveyor with 600 tph (544 mtph) capacity Manually adjustable outer scrapers ensure clean mat for elevator and paver Operating controls located on each side of the machine Manual hydraulic valves keep the system simple 84 (2134 mm) discharge height for increased paver hopper material storage Optional remix discharge hopper provides consistent material mix to the paver and hydraulically moves into and out of position
SPECS WEIGHT HEIGHT LENGTH LENGTH (RAISED TOW FRAME) WIDTH (WINGS IN) WIDTH (WING OUT) ENGINE HORSEPOWER ELEVATOR THROAT WIDTH ELEVATOR SLAT WIDTH ELEVATOR SLAT DEPTH DISCHARGE HEIGHT FRONT WHEEL CYLINDER LIFT FUEL TANK CAPACITY HYDRAULIC CAPACITY 21,400 lb 9707 kg 124 3150 mm 220 5588 mm 186 4724 mm 103 2616 mm 125 3175 mm Cat C4.4 Tier 4 137 hp 102 kw 121 3073 mm 58 1473 mm 7 178 mm 84 2134 mm 8 203 mm 50 gal 189 L 40 gal 151 L OPTIONAL EQUIPMENT Transport axle Hydraulic tongue Hydraulic pin push frame Remixing discharge hopper Chromium carbide floor plates Spray down for chains and sprockets LED lights Opposite side hydraulics control
E650C 118 (2997 mm) wide throat with 29 (736 mm) augers deliver high production 3-point suspension consisting of hydraulic cylinder for each front wheel and inter-connected cylinders for the rear wheels 60 (1524 mm) conveyor with 600 tph (544 mtph) capacity Three independent, adjustable scrapers ensure a clean surface for the elevator and paver Operating controls located on each side of the machine Variable hydraulic drive system allows speed of conveyor to match material and production requirements 84 (2134 mm) discharge height for increased paver hopper material storage Optional remix discharge hopper provides consistent material mix to the paver and hydraulically moves into and out of position
SPECS WEIGHT HEIGHT LENGTH LENGTH (RAISED TOW FRAME) WIDTH (WINGS IN) WIDTH (WING OUT) ENGINE HORSEPOWER ELEVATOR THROAT WIDTH ELEVATOR SLAT WIDTH ELEVATOR SLAT DEPTH AUGER DIAMETER DISCHARGE HEIGHT FRONT WHEEL CYLINDER LIFT FUEL TANK CAPACITY 23,800 lb 10 795 kg 124 3150 mm 230 5842 mm 188 4775 mm 122 3099 mm 184 4674 mm Cat C4.4 Tier 4 137 hp 102 kw 118 2997 mm 58 1473 mm 7 178 mm 29 737 mm 84 2134 mm 8 203 mm 80 gal 303 L OPTIONAL EQUIPMENT Transport axle Hydraulic tongue Hydraulic pin push frame Remixing discharge hopper Chromium carbide floor plates Spray down for chains and sprockets LED lights HYDRAULIC CAPACITY 40 gal 151 L Remixing Discharge Hopper
WWW.WEILERPRODUCTS.COM Materials and specifications are subject to change without notice. Featured machines and photos may include optional equipment. See your Caterpillar Dealer for complete product and application information including available options. All rights reserved. 2018 Weiler QEDQ1814-01