Axle Spindles Spindle Bearing Description Surface Part # 1-1/4 x 7 1 80055 1-1/4 x 7 (a) 1-1/16 80060 1-3/4 x 8-1/4 1-1/16 x 1-3/8 80235 2 x 8-1/4 1-1/16 x 1-3/8 80325 Eliminator, 1,750# (b) 80324 Nut/Washer/Cotter Pin 81169 Includes: nut, washer and cotter pin. a b Universal Tie Plate fits 1.90, 2 and 2-3/8 axle/u-bolt patterns. One package covers most of your customer needs. Hot dip galvanized for lasting protection. 2 per package. Part #81186 Universal Tie Plates Tie Plates Description Plate Size Center Hole Other Holes Part # 1-3/4 Axles 3.44 x 3.75 x.25.653.550 86535 2-3/8 Round Axles 3.75 x 4 x.25.687.562 86536 3 Round Axles 5.875 x 3.75 x.25.660.562 86537 2 Square Axles 3.93 x 4.18 x.25.667.562 86538 Axle Tie Plate Kits Each kit contains 4 u-bolts, 8 lock nuts, and 2 five hole tie plates. Description Plate Finish Part # Fits 1.34 Round Axles Zinc 86525 Fits 1-3/4 Round Axles Zinc 86522 Fits 1.90 Round Axles Galvanized 81175 Fits 2-3/8 Round Axles Galvanized 81180 Fits 2-3/8 Round Axles Zinc 86523 Fits 2 Square Axles Galvanized 81185 Fits 2 Square Axles Zinc 86524 Fits 3 Round Axles Zinc 86526 11
Trailer Springs Replacement Trailer Springs: heavy duty spring steel. Includes 9/16 ID nylon bushings. Packed 2 springs per box. Slipper Springs Radius End 24-5/8 (A) x 4 (C), Arch Length 23-1/2 (B) 500# capacity (per spring), 2 leaves Part #81194 500# capacity (per spring), bulk Part #81187 1,000# capacity (per spring) 4 leaves Part #81196 1,000# capacity (per spring) bulk Part #81188 Slipper Springs - Flat End 30 (A) x 4-7/8 (C), Arch Length 28 (B) 1,000# capacity (per spring), 2 leaves Part #81197 1,000# capacity (per spring), bulk Part #81189 1,850# capacity (per spring), 4 leaves Part #81198 1,850# capacity (per spring), bulk Part #81191 Double Eye Springs 25 1/4 (A) x 3 (C) 2,500# capacity (per spring), 4 leaves Part #81199 2,500# capacity (per spring), bulk Part #81192 Spring Seat 1-3/4 round axle Part #86532 2-3/8 round axle Part #86527 3 round axle Part #86528 Cast equalizer is manufactured from ductile iron. This equalizer in manufactured to industry standards and is finished in black paint. EQ-E1 Leaf Spring Equalizer Part #86533 12
Shackle Links Steel shackle links are used to mount double eye springs. Short Spring Shackles, holes center 2. Raw unfinished steel, 2 per pack Part #86534 Suitable for medium duty axles, 1,000# - 3,500# capacity. Pre-drilled for 9/16 bolt. Galvanized, 1 per pack Part #86276 Spring Bushings Steel Spring Bushings are packed 10 to a poly bag. Part #81190 Fluted Shackle Bolts For use with spring hanger brackets. Fluting prevents the bolt from turning, which can wear hanger brackets. Grade 5 steel. 9/16 x 3 bolts w/nuts. Zinc plated. 2 per pack Part #86250 Rear Spring Hangers Solid steel hangers can be used on rear slipper springs 1-3/4 to 2 wide, 5,200# - 8,000# capacity for medium duty axles, 1/4 stock, raw unfinished steel. 1 per pack Part #86275 Front Spring Hangers Solid steel stock hangers for use on slipper and double eye springs that are mounted on 1,000# - 3,500# capacity, medium duty axles. Pre-drilled for 9/16 bolt. raw unfinished steel. 1 per pack Part #86274 Hex Head Bolts Use for mounting brackets, couplers, and winch stands. Grade 5, zinc plated steel. Package contains 4 bolts, washers and nyloc nuts. Description Part # 3/8 x 3 86253 3/8 x 4 86254 3/8 x 1 86255 7/16 x 1 86256 1/2 x 3-1/2 86257 13
Single Axle Hanger Kit Complete axle hanger kit for one axle. For use with 1-3/4 double eye springs. Kit includes: (6) Shackle bolts and nuts, Zinc coated (2) Front hangers, raw unfinished steel (2) Rear hangers, raw unfinished steel (4) Shackle links, raw unfinished steel Part #86520 Zinc Plated Single Axle Hanger Kit Complete axle hanger kit for one axle. For use with 1-3/4 double eye springs All parts are zinc plated for long lasting protection. Kit includes: (6) Shackle bolts and nuts (2) Rear hangers (2) Front hangers (4) Shackle links Part #86530 Slipper Spring Axle Hanger Kit Includes all parts needed to mount to frame Kit Includes: (4) Shackle bolts and nuts, Zinc plated (4) Hangers, raw unfinished steel For use with 1-3/4 slipper springs on one axle Part #86529 For use with 2 slipper springs on one axle Part #86531 Tandem Axle Hanger Kit Complete tandem axle hanger kit for use with two axles For use with 1-3/4 double eye springs Kit Includes: (14) Shackle bolts and nuts, zinc plated (2) Equalizers, painted (6) Hangers, raw unfinished steel (8) shackle links, zinc plated Part #86521 14
U-Bolt Kits Zinc Plated Used for mounting brackets to trailer frame. Zinc plated to help prevent rusting. Includes flat washers and nyloc nuts. Galvanized Used for mounting brackets to trailer frame. Hot dipped Galvanized coated to help prevent rusting. Includes flat washers, lock washers and nuts. B B A D C D C How to measure for U-Bolts: A = Rod Width - Threads Per Inch B = Between Leg Length (inside thread) C = Leg Length D = Thread Length Description: Square & Round U-Bolts Zinc Plated Galvanized A B C D Shape Part # Part # 7/16-14 1-9/16 3-9/16 2 Square 86212 (Each) 86220 (Each) 1/2-13 1-9/16 4-1/16 2 Square 86213 (Each) 86221 (Each) 1/2-13 3-1/16 3-13/16 1-1/2 Square 86214 (Each) 86222 (Each) 1/2-13 2-1/16 4-13/16 2 Square 86215 (Each) 86223 (Each) 3/8-16 1-3/4 4-13/16 1-3/4 Round 86216 (Each) 86224 (Each) 1/2-13 2-3/8 5-3/8 2 Round 86217 (Each) 86225 (Each) 1/2-13 3-1/16 6-11/16 2 Round 86218 (Each) 86226 (Each) 3/8-16 1-5/8 3-9/16 1-3/4 Square 86219 (Each) 86227 (Each) 7/16-14 2-1/16 2-5/16 1 Square 86228 (Each) ~~~~~~ 7/16-14 2-1/16 4-5/16 2 Square 86229 (Each) ~~~~~~ 7/16-14 3-1/16 3-5/16 1-3/4 Square 86230 (Each) ~~~~~~ 7/16-14 3-1/16 4-5/16 2 Square 86231 (Each) ~~~~~~ 7/16-14 4-1/16 2-13/16 1-3/4 Square 86234 (Each) ~~~~~~ 1/2-13 2-1/8 4 2 Square 86204 (Pair) ~~~~~~ 1/2-13 3-1/8 3 1-1/2 Square 86205 (Pair) ~~~~~~ 1/2-13 3-1/8 4 2 Square 86206 (Pair) ~~~~~~ 1/2-13 4-1/8 3 2 Square 86207 (Pair) ~~~~~~ 3/8-16 2-1/8 4 1-3/4 Square 86208 (Pair) ~~~~~~ 3/8-16 3-1/8 3 1-3/4 Square 86209 (Pair) ~~~~~~ 3/8-16 3-1/8 4 1-3/4 Square 86210 (Pair) ~~~~~~ 3/8-16 4-1/8 3 1-3/4 Square 86211 (Pair) ~~~~~~ 15
Galvanized Metal Fenders Heavy duty stamped fenders are made from 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets not included. Wheel Size Dimensions (W x L x H) Part # 8 7 x 20 x 6 86264 12 7 x 23.5 x 6.5 86265 13 8 x 27.5 x 11 86266 14-15 9 x 31.5 x 13 86267 Tread Brite Aluminum Fenders Heavy duty stamped fenders are made from 12 gauge/.08 aluminum. Fenders can be drilled to fit a variety of mounting options. Mounting brackets not included. Wheel Size Dimensions (W x L x H) Part # 13-15 8 x 31.5 x 13.125 44837 13-15 9 x 33.75 x 14.875 44836 Plastic Fenders Upgrade your trailer with these high impact polyethylene fenders. Plastic fenders are UV protected. Designed for normal and low profile tires. Small fenders have no load capacity and fit 8 to 12 wheels. Large fenders have 200# capacity and fit 13, 14, and 15 wheels on single or multiple axle setups. Custom colors available. Description Dimensions (W x L x H) Part # Large White Plastic Fender (a) 11-3/8 x 45 x 11 44332 Large Black Plastic Fender 11-3/8 x 45 x 11 44331 Small White Plastic Fender (b) 7-3/4 x 21 x 5 17026 Small Black Plastic Fender (c) 7-3/4 x 21 x 5 17033 a c b Fender Brackets Metal fender brackets for 8 and 12 fenders are available in flush mount and offset, two brackets used per fender. The plastic fender brackets mount flush, two required for each fender. All brackets are galvanized, 2 brackets per package. Description Part # Offset Brackets, for 8 and 12 metal fenders 86260 Flush Brackets, for 8 and 12 metal fenders 86262 Flush Brackets, for 17026 and 17033 plastic fenders 81231 Step Brackets, for large plastic fenders. 1 per - bulk 44141 Step Brackets, for 14-15 metal fenders. 1 per - bulk 44135 16