FULL OR PART BMA SPECIFICATION AVAILABLE 4x4 Buses & Multi-Cab Trucks www.allterrainwarriors.com.au
ATW Mining Vehicles ATW Manufacturer of 4x4 buses and other specialized 4x4 vehicles for Eco-Tourism operators; commercial drilling, mining and mineral exploration companies. Our 4x4 buses are renowned worldwide for their safe operation, sturdy and long lasting construction, operating in extreme terrains and highly corrosive environments. All vehicles are based on Japanese or European 4x4 truck chassis that are commonly available through existing dealer networks and incorporate specially developed passenger modules by ATW. Full ADR 59 ROPS Compliance as standard Forward vision and communication between driver and passengers Australian designed and manufactured ADR 59 ROPS COMPLIANCE All ATW vehicles are built in accordance with ADR 59 ROPS standard eliminating the need for a secondary ROPS frame. Full destructive testing procedures have been carried out on all models. FULL FORWARD VISION Using our unique pass-through design the driver and passengers have uninterrupted contact. No need for monitors or radios. Passengers have full forward vision to the front of the vehicle and the driver has vision of the cabin and entry / exit point of the module. BUILT TOUGH These modules can be easily replaced once the service life of the truck has been reached and then transferred onto a new replacement chassis. As the passenger modules are built from the most durable materials available, they remain an asset for years to come. Some buses are now fitted to their 4th chassis after 12 years of tough operations. This works out to be highly cost effective over a long term when compared to replacing entire vehicles. All internal and external panels are of composite construction and are extremely tough, easy to repair and even easier to maintain. They are typically hosed out inside to be cleaned. BUILT FOR YOU With over 25 years experience in building 4x4 special vehicles, ATW has a wealth of expertise in areas such as CAD design, custom engineering, composite body construction, electrical systems design, suspension upgrades, and specialised accessories. The ATW manufacturing facility can meet even the toughest of safety requirements when fitting out new vehicles for specific mine site requirements and there are even several ATW 4x4 buses now in service in underground hard rock mines at this time that meet stringent MDG15 U/G standards. BUILT SAFE Front cabins have dual air bags and all bus seating complies with ADR 68. They provide greater levels of operational safety and are the preferred type of 4x4 vehicle by Federal Transport for general domestic transportation in both on and offroad conditions. Seating is specially designed without armrests or any protrusions that may catch or hook up clothing or tool belts. They are large coachsize seats covered in heavy duty canvas with a wide aisle between them for easy access and mobility within the module while the three seats in the front cab (if needed) are very spacious. BUILT SMART A specially developed spring body mounting system eliminates the high stress placed on the chassis when traveling in rough conditions. Extra heavy duty suspension systems combined with larger offroad Super Single wheel conversions, improve cornering stability, comfort levels and reduce equipment failure. ATW now has several appointed agents for these conversions in every State of Australia and these wheel packages have now been widely adopted in the construction and mining industry as well as by many Government agencies using these types of trucks such as Rural Fire and Parks & Wildlife Services.
2000 Series Multi-Cab Trucks 10 OR 14 SEAT WITH AN 10 or 14 seat multi-cab trucks. Conversions to suit Japanese 4x4 truck cab chassis. This type of vehicle meets all Australian Design Rules specifications. They are more user friendly with large, spaciouis interiors and easier entry / exit access and than typical 4x4 cars or troop carriers. They also provide greater levels of operational safety and are the preferred type of 4x4 vehicle recommended by Federal Transport for general domestic transportation in both on and offroad conditions. INTERCHANGEABLE LARGE, DROP-SIDE, WORK TRAY OR SERVICE BODY FITTED TO THE REAR. TO SUIT JAPANESE 4x4 CAB / CHASSIS. ATW INCLUSIONS: Duragal Frame built in accordance with ADR 59 ROPS. 10 & 14 seat models available. 3 year ATW warranty on body, 6 months on fittings. 19.5 super single wheel conversion. OH&S compliant, IP66 automatic electric step. Low maintenance, tough and corrosion proof inner/ outer fibreglass body shell. Offroad body mounting system. Reverse beeper & rotating beacons roof-mounted front and rear of vehicle. White noise canceling squawker. All appropriate mine safety signage and Class-1 reflective side tape. PA system / water resistant speakers. 2 x 2.5kg fire extinguishers. All metal access / egress steps and handles powdercoated safety yellow. Water proof interior, can be hosed out. ADR 68 canvas seats with stainless steel legs. Large offroad specification 12kw bus air conditioning. Rotating beacons front and rear with all ADR signal lighting molded into body. Heavy duty anti-slip flooring. Sock ring pass-through between cab and passenger module. Driver and passenger SRS air bags in cab. 10 Seat Bus with drop-side tray 14 Seat Bus with drop-side tray FIT FOR PURPOSE OPTIONS: First Aid Kits & Fire Extinguishers. Battery and start isolators. 12v jump start receptacle. Safety triangle kits. Wheel nut indicators. Quick-grab wheel chocks. Internal / external emergency engine shut-down. 60kph or 80kph speed limiters with key-lockout. Reverse camera(s) with in-cab monitor. ATW centre tow-pin bullbar. OH&S compliant truck cab steps. Quick release mine whip flag. Collision avoidance systems. GPS Tracking systems. Wet brakes. Under body protection. Fire suppression. MDG15 Underground specification. Seat belt warning systems. Work lighting.
4000 Series Buses 10 or 14 seat multi-cab trucks. Conversions to suit Japanese 4x4 truck cab chassis. This type of vehicle meets all Australian Design Rules specifications. They are more user friendly with large, spaciouis interiors and easier entry / exit access and than typical 4x4 cars or troop carriers. They also provide greater levels of operational safety and are the preferred type of 4x4 vehicle recommended by Federal Transport for general domestic transportation in both on and offroad conditions. 18, 18 WITH WALK-IN BOOT & 22 SEAT MODELS. ALL TO SUIT JAPANESE 4X4 CAB / CHASSIS. ATW INCLUSIONS: Duragal Frame built to ADR 59 ROPS. 18, 18 with walk-in boot & 22 seat models available. 3 year ATW warranty on body, 6 months on fittings. 19.5 super single wheel conversion. OH&S compliant, IP66 automatic electric step. Low maintenance, tough and corrosion proof inner/ outer fibreglass body shell. Offroad body mounting system. Reverse beeper & rotating beacons roof-mounted front and rear of vehicle. White noise canceling squawker. All appropriate mine safety signage and Class-1 reflective side tape. PA system / water resistant speakers. 2 x 2.5kg fire extinguishers. All metal access / egress steps and handles powdercoated safety yellow. Water proof interior, can be hosed out. ADR 68 canvas seats with stainless steel legs. Large offroad specification 12kw bus air conditioning. Sealed rear boot with LED lighting and wheel changing tools securely mounted. Rotating beacons front and rear with all ADR signal lighting molded into body. Heavy duty anti-slip flooring. Sock ring pass-through between cab and passenger module. Driver and passenger SRS air bags in cab. FIT FOR PURPOSE OPTIONS: First Aid Kits & Fire Extinguishers. Battery and start isolators. 12v jump start receptacle. 18 Seat Bus 18 Seat Bus with walk-in boot 22 Seat Bus Safety triangle kits. Wheel nut indicators. Quick-grab wheel chocks. Internal / external emergency engine shut-down. 60kph or 80kph speed limiters with key-lockout. Reverse camera(s) with in-cab monitor. ATW centre tow-pin bullbar. OH&S compliant truck cab steps. Quick release mine whip flag. Collision avoidance systems. GPS Tracking systems. Wet brakes. Under body protection. Fire suppression. MDG15 Underground specification. Seat belt warning systems. Work lighting. Custom trays, tool lockers, service bodies, cages and tarp covers available.
7000 Series Buses 26 / 30 / 34 / 38 seat multi-cab trucks. Conversions to suit Japanese 4x4 truck cab chassis. This type of vehicle meets all Australian Design Rules specifications. They are more user friendly with large, spaciouis interiors and easier entry / exit access and than typical 4x4 cars or troop carriers. They also provide greater levels of operational safety and are the preferred type of 4x4 vehicle recommended by Federal Transport for general domestic transportation in both on and offroad conditions. 26, 30, 34, 38 SEAT MODELS WITH LARGER SEATING CAPACITY AVAILABLE UPON REQUEST. TO SUIT 4X4 CAB / CHASSIS. ATW INCLUSIONS: Duragal Frame built to ADR 59 ROPS. 26 / 30 / 34 / 38 seat models available. 3 year ATW warranty on body, 6 months on fittings. OH&S compliant, IP66 automatic electric step. Low maintenance, tough and corrosion proof inner/ outer fibreglass body shell. Offroad body mounting system. Reverse beeper & rotating beacons roof-mounted front and rear of vehicle. White noise canceling squawker. All appropriate mine safety signage and Class-1 reflective side tape. PA system / water resistant speakers. 2 x 2.5kg fire extinguishers. All metal access / egress steps and handles powdercoated safety yellow. Water proof interior, can be hosed out. ADR 68 canvas seats with stainless steel legs. Large offroad specification 12kw bus air conditioning. Sealed rear boot with LED lighting and wheel changing tools securely mounted. Rotating beacons front and rear with all ADR signal lighting molded into body. Heavy duty anti-slip flooring. Sock ring pass-through between cab and passenger module. Driver and passenger SRS air bags in cab. 26 Seat Bus 30 Seat Bus 34 Seat Bus 38 Seat Bus FIT FOR PURPOSE OPTIONS: First Aid Kits & Fire Extinguishers. Battery and start isolators. 12v jump start receptacle. Safety triangle kits. Wheel nut indicators. Quick-grab wheel chocks. Internal / external emergency engine shut-down. 60kph or 80kph speed limiters with key-lockout. Reverse camera(s) with in-cab monitor. ATW centre tow-pin bullbar. Toilet available Quick release mine whip flag. Collision avoidance systems. GPS Tracking systems. Wet brakes. Under body protection. Fire suppression. Seat belt warning systems. Work lighting. Super single wheel conversion.
ATW Specialist Accessories ATW Wheels, Suspension & Accessories have been specifically developed for common 4x4 cab chassis to enhance both on and off road capabilities and general operational safety. All of these products are well proven and are put to the test daily over some of the most horrendous roads, mine sites and bush tracks in the country... some for over 20 years. HIGH QUALITY, LOCALLY DEVELOPED HEAVY DUTY OFF-ROAD SUSPENSION SYSTEMS AND SUPER SINGLE REAR WHEEL CONVERSIONS ATW SPECIALIST ACCESSORIES ATW PARABOLIC SUSPENSION UPGRADE Highly recommended for all Isuzu NPS and Fuso FG Canter models where offroad travel is intended. All springs, bumpstops and shock absorbers are replaced. Includes: Front and rear ATW parabolic spring packs. Front and rear Aeon-style bumpstops. Front and rear heavy duty shockabsorbers All new u-bolts Front and rear wheel alignment ATW SINGLE WHEEL CONVERSION This is an ultra heavy duty wheel and tyre package with full ADR Compliance. Legal Australia-wide. Includes: 5 x ATW Super Single 19.5 x 8.25 rims with double inflation valves. 5 x Toyo 285/70R/19.5 M608Z Mud + Snow tubeless tyres load rated to 2900 kg each. 12 x replacement rear wheel nuts Speedo recalibration unit Brake modifications required for ADR compliance AUTO TORQUE BIAS DIFF (FRONT ONLY) Highly recommended for all vehicles intended for use in soft ground such as sand and mud. Always engaged and does not effect steering. In soft ground, power is shifted to the wheel with the most grip. A lifetime warranty is offered on the parts used in this conversion. OTHER ACCESSORIES AVAILABLE: BMA COMPLIANT FRONT CAB STEPS ATW FLARED GUARDS WHEEL NUT INDICATORS ATW TOW PIN BULLBAR ATW WINCH COMPATIBLE BULLBAR ATW WINCH SUSPENSION SEATS NARVA XTREME SPOTLIGHTS REVERSING CAMERA FIRE EXTINGUISHER UHF RADIO OVERHEAD ROOF CONSOLE CANVAS SEAT COVERS HANDBRAKE WARNING ALARM KEY ON / LIGHTS ON MODULE MINE WHIP FLAG SAFETY TRIANGLE KIT RADIATOR SPLASH GUARD EXTRA FUEL TANKS
44 Central Park Drive Yandina QLD 4561 P: +617 5446 8666 F: +617 5446 8766 Perth WA P: +618 9209 1075 F: +618 9248 5318 Toll Free: 1800 468 590 www.allterrainwarriors.com.au