The Moti-Start Portable Supportive Seat is a locally size adjustable supportive chair. It is intended for use by infants who need extra postural support. It comes semi-assembled and is easy to transport and has many features such as an adjustable tray and headrest, and a tilt-in-space seat. The product is designed for use on the floor but can be placed on a higher surface if the surface is large and stable enough to be safe. The product is distributed through a network of Motivation s service partners worldwide. Moti-Start Portable Supportive Seat Product Code Product Description Manufacture WMSSG1-P-01 Portable Supportive Seat Made in China under license from Motivation Document Issue 9 Date of issue September 2014 Overview The Moti-Start Portable Supportive Seat is a paediatric size adjustable chair. The Moti-Start is the smallest chair in a range of three chairs that accommodate different sizes of children (the other two being the Moti Go Medium and Large). It has a plywood frame, with durable upholstery and adjustable postural support components. It has eight daily adjustable tilt positions. The chair has been designed so that parts are easy to replace, maintain, repair or customise. Can be used at home or easily transported, for example, for use at school or visiting friends and family. One boxed semi-assembled supportive seat can be fully assembled and adjusted to suit the individual needs of the child. The chairs need final assembly and set-up and we recommend they are fitted to each user by trained assemblers & practitioners. The chair has been designed to allow individual modification to the postural support components to accommodate or correct problems with posture. 1 The packaging is designed for easy disassembly for recycling or reuse. 1 Intermediate service level training provides skills for prescribing and fabricating postural support modifications Moti-Start Supportive Seating 1
Product user group The Moti-Start is for young children from approximately 6 months to 2 years of age, depending on body measurements. A Environment B C The Moti-Start is suitable for users whose body measurements fall within the following ranges: A. Hip width: 140-240mm B. Buttock to back of knee: 190-300 C. Back of knee height from bottom of feet: 160-260mm Maximum user weight: 25kg (55lbs) The supportive seat is designed for use indoors on the floor or a flat surface. It can be moved easily between rooms by either using the grab handle at the front or using the tow strap and can be used where space is limited. The chair can be folded easily and is light weight. Although the wheelchair is primarily for indoor use it is suitable for use outdoors. Supportive Seat adjustments Hip pad width* Seat depth Backrest angle Backrest height Daily tilt angles Footrest height Footrest angle Lateral trunk supports: width Lateral trunk supports: height* Lateral trunk supports: forward / back Headrest height Headrest position 140-240mm *Range achieved by adding or reducing foam from the adjustable hip pads 160-270mm The angle between backrest and seat is always 90 degrees. 260-345mm Choice of eight positions from vertical backrest up to 17 degrees of backward tilt. Quick and easy to adjust without any hand tools. 160-260mm Parallel to the seat angle 120-180mm 130 250mm *Measured from top of seat to top of support 2 options, Forward and Back, 45mm range 310-420mm 60mm *30mm forward or backward adjustment from standard position Moti-Start Supportive Seating 2
Abductor width* Tray height Tray forward/backward 25 110mm *Can be individually modified right and left Varnished plywood tray with non-slip EVA (Ethylene Vinyl Acetate) foam top. Height adjustable 110-180mm Depth adjustable 100mm * Standard cut-out can be increased in width and depth to match the user by cutting out the tray surface (and varnishing the cut edge) Performance specifications Backrest Trunk supports Abductor Cushion Lifecycle Carry handle Wheels Seat Headrest Straps Height adjustable. Polyurethane foam padding inside water resistant washable cover. Varnished 15mm plywood base. Adjustable width, length and height. Pads covered with EVA (Ethylene Vinyl Acetate) foam. Removable abductor with EVA (Ethylene Vinyl Acetate) foam (highly water resistant) outer surface. Quick and easy to take on and off, without using hand tools. Cushion with adjustable length pre-ischial shelf feature, inside a water resistant washable cover. Cushion and cover are easily removable (without hand tools) for cleaning and adjustment. The product is designed to provide at least 3 years of service, during normal use and providing it is appropriately maintained. For carrying the product when the chair is empty. Small plywood rear wheels in combination with carry handle and tow-strap provide some short distance mobility for this product. Varnished 12 mm plywood flat seat base (beneath the cushion). Contoured headrest with removable, washable cotton cover. Adjustable headrest height and depth. The contoured headrest shape can be easily modified if necessary. The chair is supplied with shoulder, pelvis and ankle straps. A towing strap is also supplied to help with short distance mobility. Standards This product is ISO 9001 (2008-2013) and ISO 13845 (2008-2013) certified. Finish Transport / storage Box details Metal components are galvanised or passivated. Wooden components are finished with exterior grade varnish. The chair is foldable. Plain brown five ply cardboard with black printed graphics. The packaging is not waterproof. Outside dimensions - 740X460X370mm. Moti-Start Supportive Seating 3
Weight Care and maintenance Spare parts Net weight of the Moti- Start is approx. 7.9 kg. This product comes with a User Tool Kit, which contains basic hand tools to allow basic care and maintenance procedures to be carried out on the product. Standard spare parts packs are available, and a detailed spare parts list can be given on request. Moti-Start Supportive Seating 4
MIN 665 MAX 750 435 712 440 430 Moti Start Supportive Seat 5
The Moti-Go Wheeled Supportive Seating is a locally size adjustable supportive wheelchair. It is intended for use by children and small adults who need extra postural support in combination with mobility. It is built on the WM3-01 platform, is flat pack and comes with many features such as a tray, tilt in space, headrest, and removable wheels and clip on clip off seating unit for ease of transportation. The wheelchair is distributed through a network of Motivation s service partners worldwide. Moti- Go Supportive Seating Product Code WMSSG2-01 (size M), WMSSG3-01 (size L) Product Description Manufacture Wheeled Supportive Seating Made in China under license from Motivation Document Issue 9 Date of issue August 2013 Overview The Moti-Go Supportive Seating is a highly adjustable wheelchair, which can grow with the child or young adult. It has a powder coated mild steel frame, with hard wearing upholstery and adjustable postural support components. It has a single large rubber castor wheel at the front, a long wheelbase and 26 pneumatic rear tyres. This helps the user to self propel or for the attendant to push the wheelchair safely over uneven and sloping ground. High quality chrome finish pushrings are available as an accessory part. The wheelchair has been designed so that parts are easy to replace, repair or customise and uses common rear wheel and bearing sizes, for ease of maintenance. The boxed flat-pack supportive seat and chassis can be assembled and adjusted into a wide range of sizes. The supportive seat and chassis are boxed separately. The chairs need to be individually assembled and we recommend they are fitted to each user by trained assemblers & practitioners. The packaging is designed for easy disassembly for recycling or re-use. Moti-Go Supportive Seating 1
Product user group Moti-Go Supportive Seating is for children between the approximate ages 3 to 17 years of age, depending on body measurements. There are two sizes of wheelchair to cover this range, medium (M) and large (L). For a smaller size child, Motivation recommends the Moti-Start. A B C The Moti-Go is suitable for users whose body measurements fall within the following ranges: A. Hip width: M(170-290)mm, L (135-330)mm B. Buttock to back of knee: M(310-390)mm, L(325-480)mm C. Back of knee height from bottom of feet: M (160-420)mm, L (160-420mm) Maximum user weight: WMSSG2: 50Kg(110lbs) WMSSG3: 75kg(165lbs) Environment The wheelchair is designed for better performance over rough ground and in conditions normally found in rural areas. However the wheelchair is also being used successfully in urban and semi-urban areas which often have similar road conditions and obstacles to rural areas. The wheelchair is stable and rides easily over rough ground because it has a long wheelbase, large front castor wheel and cambered rear wheels. Although the wheelchair is primarily for outdoor use it is also suitable for use indoors. Supportive Seat adjustments Hip pad: Width Hip pad: Forward / Back Seat depth* Ischial shelf length* Back wheel (balance) position Backrest angle M(165-300)mm, (135-330)mm * Range achieved by adding or reducing foam from the adjustable hip pads 2 options, Forward and Back, 25mm range. M(190-330)mm, L(295-430)mm * Without a sacral pad fitted The standard adjustment range is achieved by placing in the chip foam insert into the cushion design. The insert comes as standard with the seating unit. Shelf length range: M(105mm 200mm), L (165mm 280mm) * measured from front of seat The wheelchair can be prescribed in safe balance setting only. When the seating unit is tilted the anti-tip stand should be swung down and locked in place. The angle between the backrest and seat can be adjusted from 80 degrees to 105 degrees. Moti-Go Supportive Seating 2
Backrest height Daily tilt angles Sacral pad: Height and Depth Footrest height Footrest angle Lateral trunk supports: Width Lateral trunk supports: Height* Lateral trunk supports: Forward / Back Headrest position: Height* Headrest position: Forward / Back Abductor Width Tray: Height Tray: Forward / Back* Pelvis strap position: Forward / Back* M(320-430)mm, L (400-570)mm 4 positions: 0 (vertical), 5, 10 and 15 degree options, quick and easy to adjust without any hand tools. Adjustable height position range: 100mm Adjustable depth range: 40mm (by cutting down the chip foam pad) M (160-420)mm, L(160 420)mm 3 axes of rotation and infinite angle adjustment. M(170-370)mm, L(200-400)mm * It is necessary to rotate the lateral trunk support clamps 180 degrees to get the full range M (180-375)mm, L (200 375)mm * Measured from top of seat to top of trunk support 2 options, Forward and Back, 45mm range. M (370-580)mm, L (450-690)mm * Measured from top of seat to the occipital shelf support feature, which is located at the middle of the headrest. Adjustment is achieved through 3 optional positions and provides 60mm range (30mm forward or backward adjustment from standard position) M & L (25 110)mm * Can be individually modified right and left The abductor is cut to the prescribed width and angle and then the EVA side panels can be glued on, to provide a durable outer surface. Varnished plywood tray with non-slip EVA (Ethylene Vinyl Acetate) foam top. Height adjustable M & L (110-245)mm. Depth adjustable 145mm * Standard cut-out shape on the tray can be increased in width and depth to match the user (by cutting and varnishing the tray surface) Two position options, each with adjustable strap mounting point, providing an adjustment range: M (130-260)mm, L(175-350)mm *measured from front of seat to front of strap Moti-Go Supportive Seating 3
Performance Specifications Backrest Trunk supports Abductor Brakes Cushion Lifecycle Push handles Rear Wheels Pushrings Spoke guards Seat Headrest Straps Standards Finish Height adjustable solid backrest. Polyurethane foam padding inside water resistant washable cover. Stretchy fabric is used on the sides of the backrest cover to help accommodate any postural modification inserts. Varnished 15mm plywood base. Adjustable width, length and height. Pads covered with EVA (Ethylene Vinyl Acetate) foam. Abductor with EVA (Ethylene Vinyl Acetate) foam (highly water resistant) outer surface. Quick and easy to take on and off, without using hand tools. Adjustable position aluminium toggle brakes, with durable bronze bushes and comfortable rubber grip handles. Cushion with adjustable pre-ischial shelf inside a water resistant washable cover. New, easy to remove cushion and cover, for ease of fitting adjustments at point of service and regular cleaning during normal use. The product is designed to provide at least 5 years of service, during normal use and providing it is appropriately maintained. Ergonomically positioned push handles with rubber grips. 26" x 1 3/8" diameter rear wheels, with 36 spoke aluminium rims. Robust hub with two 6001 ZZ bearings and diameter 12 mm axles. Pushring mounting bolts are pre-assembled to the wheel rim to allow fast attachment of pushrings without having to remove the tyre or inner tube from the wheel. Pushrings do not come as standard on this product, please see the accessories section below for more details. Rear wheels can be fitted with the fabric spoke guards. Attachment can be either on the outside, or inside of the wheel, depending on the needs of the user. Varnished 15 mm plywood seat base. Contoured headrest with removable, washable cotton cover. Adjustable headrest height and depth. The contoured headrest shape can be easily modified if necessary. The chair is supplied with shoulder, pelvis and ankle straps. This product is ISO 9001 (2008-2013) and ISO 13845 (2008-2013) certified. Frame components are either galvanised or powder coated. Wooden components are finished with exterior grade varnish. Moti-Go Supportive Seating 4
Transport / storage Tyres Inner Tubes Box details Weight Care and maintenance Accessory parts The rear wheels and the seating unit are designed with quick-release mechanisms to allow swift removal from the chassis, to facilitate easier storage at home and on public or private transport. Pneumatic - medium tread. Extra thick, high quality rubber inner tubes, have 4mm thick rubber on the outer circumference and 2mm thick rubber on the inner circumference, which provide excellent puncture resistance during daily use. Inner tube valve is the schrader valve type (standard car inner tube valve). Plain brown five ply cardboard with black printed graphics. The packaging is not waterproof. Net weight of the Moti-Go without chassis approx. 16 kgs (M), 17 kgs (L) Net weight of the Moti-Go with chassis approx. 28 kgs (M), 29kgs (L) Wheeled chassis 12 kgs. This product comes with a tyre pump and a tyre puncture repair kit. This product comes with a User Tool Kit, which contains basic hand tools to allow basic care and maintenance procedures to be carried out on the product. Pushrings are available for this product and are supplied as an accessory part in packs of 10 pieces. Diameter 19 mm, high quality, chrome plated steel pushring, attach to wheel rim in four places. Spare parts Standard spare parts packs are available, and a detailed spare parts list can be given on request. Moti-Go Supportive Seating 5
Size M Size L MIN 1065 MAX 1150 1008 MIN 1195 MAX 1280 1008 1082 606 1082 606 583 583 Moti Go Supportive Seating
Size M Size L MIN 945 MAX 1030 MIN 1075 MAX 1160 676 761 525 525 380 593 380 593 930 930 Moti Go Supportive Seating
Moti-Go Supportive Seating 6
Moti-Go Supportive Seating 6
Moti-Go Supportive Seating 6
Wheelchairs for Kids Adjustachair Specifications PO Box 1175, Wangara DC, Western Australia 6947 00 61 8 9409 3633 E-mail: wchairs@bigpond.net.au Web site: www.wheelchairsforkids.org Wheelchair Type: 3-wheel rough terrain wheelchair for children who require full custom fitted postural support. Designed in accordance with World Health Organisation (WHO) Guidelines and compliancetested by WFK to ISO 7176.8:1998 standards. Materials of Construction: Powder-coated galvanised steel chassis; aluminium framework; HDPE seat and back, foam padded seat cushion with shelf, and back padded cushion with lumbar support. Seat width: Adjustable range 200-300mm; Seat depth: Adjustable range 200-360mm Chair inclination: adjustable tilt range 4 o, 8 o, and 12 o. Seat Cushion: Hard-wearing water-resistant stretch- covered 50mm thick two-layer foam cushion with removable adjustment - shelf. Extra foam provided for additional pre-seat bone shelf and wedges when required. Backrest: Height adjustable with 70 postural support attachment holes, covered foam backrest cushion with adjustable lumbar support. Footrests: Independently-adjustable height range 180-380mm, adjustable tilt 11 and 7.5 degrees up and down and with forward, backward and inverted adjustments. Rear wheels: Adjustable forward and back for balance control; 500mm wheel with handrail, rubber tyres and solid puncture-proof tubes. Front wheel: single 150mm self steering pivot wheel with solid tyre. Brakes: Manual push-on automatically adjusting with rear wheel positioning. Postural supports: Foam-covered hip and trunk supports with vertical, forward, and tilt adjustability; adjustable supportive straps (ankle straps, hip/lap and trunk straps, body harness). Head rest: (where provided) multi adjustable foam-padded headrest with attachable (when required) adjustable padded head-side supports, Additional features: Adjustable tray, tool kit including spare nuts, bolts, buckle, visual assembly instruction, and adjustment manual. Weight: 23.0 kg, overall length 1050mm, overall width: 610mm Maximum recommended user weight: 65 kg Carton dimension: 920mm (L) x 510mm (W) x 380mm (H); Weight 27Kgs Price: Free of charge ex Western Australian factory to organisations having approved fitting expertise. 12.10.13