Automotive Data Solutions Inc. INSTALL GUIDE FLC-AL(DL)-HK-EN AVAILABLE FOR : FLCAN Rev. Date: June, 0 Doc. No.: #### HK U.S. PATENT NO.,,0 PLEASE VISIT WWW.FLASHLOGIC.COM FOR COMPLETE PRODUCT DETAILS The brand names and logos found in this guide are property of their respective owners. Automotive Data Solutions Inc. 0 TERMS OF USE: automotive data Solutions inc. ( ads ) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ads product in a vehicle, it is the Certified Technician s responsibility to review the most current Product Guide, install Guide and vehicle-specific notes available in Weblink. ads is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ads reserves itself the right to suspend any Weblink account without notice and decline to offer technical support to non- Certified Technicians, non-compliant Certified Technicians or end users.
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 INSTALL TYPE SELECTION features Make MoDel Year InStall type Data IMMoBIlIZer BYPaSS SecUre takeover arm oem alarm DISarM oem alarm HYUnDaI a/m alarm ctrl from oem remotes a/m rs ctrl from oem remotes & PoWer liftgate PrIorItY Unlock Door lock Door Unlock trunk/hatch release Door StatUS output trunk StatUS output HooD StatUS output* Brake PeDal StatUS output tachometer output e-brake output rap SHUtDoWn ctrl Elantra GT PTS AT Ioniq Hybrid PTS AT Veloster PTS AT Cadenza PTS AT - Forte PTS AT/MT - Niro PTS AT - Rio PTS AT Sportage PTS AT - Available only for AL-k, AL-k & BLADE-AL k with compatible RS. Telematics Data Gateway not available on BLADE-AL k. This feature is disabled by default, it must be enabled during programming. The power liftgate feature is only available when ignition is off. *Available only if vehicle is equipped with factory hood switch. kia
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 COMPONENT LOCATOR A F H D G C E B
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART Make MoDel Year DeScrIPtIon kia name type PoSItIon PolarItY MoDUle location component locator Sportage PTS AT - V I/P-B Black 0 pin 0 Green (+) Dash fuse box, front view A Accessory MC Blue pin Pink (+) Driver kick panel C Starter MC Blue pin 0 Yellow/Orange (+) Driver kick panel C Ignition MC Blue pin Blue (+) Driver kick panel C CanH I/P-F White 0 pin Blue (DATA) Dash fuse box, rear view A CanL I/P-F White 0 pin White (DATA) Dash fuse box, rear view A Parking Light M0 Black pin Yellow (MUX) Head light switch ~ Data MC Blue pin White/Orange or Blue (DATA) Driver kick panel C PTS M-C Black 0 pin 0 White (-) Smart key module, above gas pedal G PTS M-C Black 0 pin Green/Black (-) Smart key module, above gas pedal G Takeover I/P-F White 0 pin Yellow (+) Dash fuse box, rear view A Brake I/P-F White 0 pin Pink (+) Dash fuse box, rear view A
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF DRIVER KICK PANEL MC - BLUE IGNITION (+) 0 0 0 DATA ACCESSORY (+) STARTER (+) DASH FUSE BOX FRONT VIEW DASH FUSE BOX REAR VIEW V (+) M - BLACK HEAD LIGHT SWITCH PARKING LIGHT (MUX) I/P-B - BLACK 0 0Ω A CANL CANH TAKEOVER (+) I/P-F - WHITE 0 0 0 BRAKE (+) A N00 CONNECTIONS REQUIRED FOR TAKEOVER 0 0 0 0 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 0 0 0 0 REMOTE STARTER PARKING LIGHT (+) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT <- OPTIONAL V (+) INPUT ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE WHITE/BLACK - IMMO. (DATA) VEHICLE SIDE WHITE/RED -IMMO. (DATA) CONNECTOR SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GREEN/YELLOW (NC) GRAY/RED - DATA GRAY/YELLOW (NC) M-C BLACK CONNECTOR CONNECTIONS REQUIRED FOR TAKEOVER 0 0 PTS (-) PTS (-) N00 N00 SMART-KEY CONTROL MODULE ABOVE GAS PEDAL
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART Make MoDel Year DeScrIPtIon kia name type PoSItIon PolarItY MoDUle location component locator Forte PTS AT/MT - V I/P-C Black 0 pin 0 Red (+) Junction box, front view A Starter EM White pin 0 Orange (+) Driver kick panel C Accessory EM White pin Black (+) Driver kick panel C Ignition EM White pin Pink (+) Driver kick panel C CanH I/P-F White pin Orange (DATA) Junction box, rear view A CanL I/P-F White pin Green (DATA) Junction box, rear view A Parking Light M0-L White pin 0 Pink (-) Parking light switch ~ Data EM White pin Blue/Orange (DATA) Driver kick panel C PTS M0 Black pin 0 Yellow/Black (-) PTS button D PTS M0 Black pin 0 Yellow/Orange (-) PTS button D Takeover I/P-E Black pin Pink/Black (+) Junction box, rear view A Clutch ~ White 0 pin 0 Green (-) Clutch switch A
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF CONNECTIONS REQUIRED FOR TAKEOVER I/P-E - BLACK TAKEOVER (+) I/P-C - BLACK V (+) 0 0 JUNCTION BOX FRONT VIEW JUNCTION BOX REAR VIEW I/P-F - WHITE 0 0 CANH CANL CLUTCH SWITCH WHITE CLUTCH (-) MANUAL TRANSMISSION ONLY 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 EM - WHITE 0 0 0 0 DRIVER KICK PANEL STARTER (+) 0 IGNITION (+) 0 ACCESSORY (+) 0 0 REMOTE STARTER MANUAL TRANSMISSION ONLY STARTER (-) OUTPUT V (+) INPUT PARKING LIGHT (-) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT <- OPTIONAL ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT DATA MANUAL TRANSMISSION ONLY N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE PUSH TO START SWITCH RIGHT SIDE OF STEERING COLUMN M0 - BLACK WHITE/BLACK - TAKEOVER (+) CONNECTOR SIDE WHITE/RED - TAKEOVER (+) VEHICLE SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GREEN/YELLOW (NC) GRAY/RED - DATA GRAY/YELLOW (NC) M0-L - WHITE STEERING COLUMN N00 N00 PTS (-) PTS (-) 0 PARKING LIGHT (-) 0
Page 0 of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART Make MoDel Year DeScrIPtIon kia name type PoSItIon PolarItY MoDUle location component locator Niro PTS AT - V I/P-B Black 0 pin 0 Red (+) Dash fuse box, front view A Accessory EM Black pin Green (+) Driver kick panel C Starter I/P-A Black pin 0 Orange (+) Dash fuse box, front view A Ignition EM Black pin 0 Pink (+) Driver kick panel C CanH MF White pin Red (DATA) Driver kick panel C CanL MF White pin Blue (DATA) Driver kick panel C Parking Light M0 Black pin Blue (MUX) Parking light switch ~ Immo. Data EM Black pin Brown/Orange (DATA) Driver kick panel C PTS M0 Gray pin 0 Yellow/Black (-) PTS switch D PTS M0 Gray pin 0 Yellow/Orange (-) PTS switch D Takeover I/P-F White 0 pin Pink (+) Dash fuse box, rear view A Brake I/P-A Black pin 0 Green (+) Dash fuse box, front view A
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 IGNITION (+) DATA ACCESSORY (+) 0 CANL CANH 0 0 0 DASH FUSE BOX REAR VIEW FRONT VIEW V (+) I/P-B - BLACK EM - BLACK DRIVER KICK PANEL MF - WHITE STARTER (+) 0 M - BLACK HEADLIGHT SWITCH PARKING LIGHT (MUX) BRAKE (+) 0 0 I/P-A - BLACK N00 0 0Ω A 0 0 0 I/P-F - WHITE TAKEOVER (+) A CONNECTIONS REQUIRED FOR TAKEOVER 0 0 0 0 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 0 0 0 0 REMOTE STARTER PARKING LIGHT (+) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT <- OPTIONAL UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT V (+) INPUT ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE WHITE/BLACK - IMMO. (DATA) VEHICLE SIDE WHITE/RED - IMMO. (DATA) CONNECTOR SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GREEN/YELLOW (NC) GRAY/RED - IMMO. (DATA) CONNECTOR SIDE GRAY/YELLOW (NC) CONNECTIONS REQUIRED FOR TAKEOVER PTS SWITCH GRAY 0 PTS (-) PTS (-) N00 N00
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART Make MoDel Year DeScrIPtIon name type PoSItIon HYUnDaI PolarItY MoDUle location component locator V I/P-B Black 0 pin 0 Red (+) Dash fuse box, front view A Accessory EM Black pin Green (+) Driver kick panel C Starter I/P-A Black pin 0 Orange (+) Dash fuse box, front view A Ignition EM Black pin 0 Pink (+) Driver kick panel C Ioniq Hybrid PTS AT CanH MF White pin Red (DATA) Driver kick panel C CanL MF White pin 0 Blue (DATA) Driver kick panel C Parking Light M0-L Black pin Blue (MUX) Head light switch ~ Immo. Data EM Black pin Brown/Orange (DATA) Driver kick panel C PTS M0 Gray pin 0 Yellow/Black (-) PTS switch D PTS M0 Gray pin 0 Yellow/Orange (-) PTS switch D Takeover I/P-F White 0 pin Red (+) Dash fuse box, rear view A Brake I/P-A Black pin 0 Green (+) Dash fuse box, front view A
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 IGNITION (+) IMMO. DATA ACCESSORY (+) 0 0 0 0 CANL CANH DASH FUSE BOX REAR VIEW FRONT VIEW V (+) I/P-B - BLACK EM - BLACK DRIVER KICK PANEL MF - WHITE STARTER (+) 0 M - BLACK HEADLIGHT SWITCH PARKING LIGHT (MUX) BRAKE (+) 0 0 I/P-A - BLACK N00 0 0 0 0Ω 0 I/P-F - WHITE TAKEOVER (+) A A CONNECTIONS REQUIRED FOR TAKEOVER 0 0 0 0 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 0 0 0 0 REMOTE STARTER PARKING LIGHT (+) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT <- OPTIONAL UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT V (+) INPUT ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE WHITE/BLACK - IMMO. (DATA) VEHICLE SIDE WHITE/RED - IMMO. (DATA) CONNECTOR SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GREEN/YELLOW (NC) GRAY/RED - IMMO. (DATA) CONNECTOR SIDE GRAY/YELLOW (NC) CONNECTIONS REQUIRED FOR TAKEOVER PTS SWITCH GRAY 0 PTS (-) PTS (-) N00 N00
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART HYUnDaI Make MoDel Year DeScrIPtIon name type PoSItIon PolarItY MoDUle location component locator V I/P-B Black 0 pin 0 Red (+) Dash fuse box, front view A Accessory EM Black pin Green (+) Driver kick panel C Starter I/P-E White pin 0 Yellow (+) Dash fuse box, rear view A Ignition EM Black pin 0 Red (+) Driver kick panel C Elentra GT PTS AT CanH I/P-G White pin 0 White (DATA) Dash fuse box, rear view A CanL I/P-G White pin 0 Black (DATA) Dash fuse box, rear view A Parking Light M0-L Black pin Blue (MUX) Head light switch ~ Immo. Data EM Black pin Brown/Orange (DATA) Driver kick panel C PTS M0 Gray 0 pin 0 Yellow/Black (-) Push to start switch D PTS M0 Gray 0 pin 0 Yellow/Orange (-) Push to start switch D Takeover I/P-E White pin Pink (+) Dash fuse box, rear view A
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 IGNITION (+) IMMO. DATA 0 0 0 0 ACCESSORY (+) 0 DASH FUSE BOX FRONT VIEW REAR VIEW EM - BLACK DRIVER KICK PANEL STARTER (+) I/P-E - WHITE 0 0 TAKEOVER (+) CANH CANL M0-L - BLACK HEADLIGHT SWITCH PARKING LIGHT (MUX) 0 I/P-G - WHITE 0 V (+) 0Ω I/P-B - BLACK A 0 0 0 0 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 0 0 0 0 REMOTE STARTER PARKING LIGHT (+) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT <- OPTIONAL UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT V (+) INPUT ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE WHITE/BLACK - TAKEOVER (+) VEHICLE SIDE WHITE/RED - TAKEOVER (+) CONNECTOR SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED - GROUND (-) INPUT GREEN/YELLOW (NC) GRAY/RED - IMMO. (DATA) CONNECTOR SIDE GRAY/YELLOW (NC) CONNECTIONS REQUIRED FOR TAKEOVER PTS SWITCH M0 - GRAY 0 PTS (-) PTS (-) N00 N00
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART Make MoDel Year DeScrIPtIon kia name type PoSItIon PolarItY MoDUle location component locator Rio PTS AT V I/P-A Black pin Red (+) Dash fuse box, front view A Starter I/P-D Gray pin Red (+) Dash fuse box, rear view A Accessory I/P-D Gray pin White (+) Dash fuse box, rear view A Ignition I/P-D Gray pin Brown (+) Dash fuse box, rear view A CanH JM0 Green 0 pin Orange (DATA) Behind dash fuse box A CanL JM0 Green 0 pin 0 Green (DATA) Behind dash fuse box A Parking Light M0-L Black pin Green (MUX) Head light switch ~ Immo. Data EM Black pin 0 Brown (DATA) Driver kick panel C PTS M0 Gray 0 pin 0 Pink (-) Push to start switch D PTS M0 Gray 0 pin 0 Green (-) Push to start switch D
Page 0 of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 IMMO. DATA 0 0 0 0 0 DASH FUSE BOX FRONT VIEW REAR VIEW IGNITION (+) EM - BLACK DRIVER KICK PANEL STARTER (+) 0 0 0 0 ACCESSORY (+) I/P-D - GRAY M0-L - BLACK HEADLIGHT SWITCH PARKING LIGHT (MUX) V (+) 0 0 0 0 0 0Ω I/P-A - BLACK A CANL 0 0 CANH JM0 - GREEN BEHIND DASH FUSEBOX 0 0 0 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 0 0 0 REMOTE STARTER PARKING LIGHT (+) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT <- OPTIONAL UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT V (+) INPUT ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE WHITE/BLACK - IGNITION (+) VEHICLE SIDE WHITE/RED - IGNITION (+) CONNECTOR SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) CONNECTOR SIDE BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED - GROUND (-) INPUT GREEN/YELLOW (NC) GRAY/RED - IMMO. (DATA) GRAY/YELLOW (NC) CONNECTIONS REQUIRED FOR TAKEOVER PTS SWITCH M0 - GRAY PTS (-) PTS (-) 0 N00 N00
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART Make MoDel Year DeScrIPtIon kia name type PoSItIon PolarItY MoDUle location component locator Cadenza PTS AT - V ~ Black 0 pin 0 Red (+) Dash fuse box, front view A Starter ~ Red pin Gray (+) Driver kick panel C Accessory ~ Red pin 0 White (+) Driver kick panel C Ignition ~ Red pin 0 Pink (+) Driver kick panel C CanH ~ Blue pin Yellow (DATA) Driver kick panel C CanL ~ Blue pin Black (DATA) Driver kick panel C Parking Light ~ Black pin Gray (MUX) Head light switch ~ Immo. Data ~ Red pin White (DATA) Passenger kick panel B PTS ~ Black pin 0 Yellow/Black (-) Push to start switch D PTS ~ Black pin 0 Yellow/Orange (-) Push to start switch D Takeover ~ Gray 0 pin 0 Green/Orange (+) Dash fuse box, front view A
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF STARTER (+) RED 0 0 IGNITION (+) ACCESSORY (+) DRIVER KICK PANEL 0 0 0 0 BLUE 0 0 CANH CANL RED PASSENGER KICK PANEL 0 0 0 IMMOBILIZER (DATA) HEADLIGHT SWITCH BLACK PARKING LIGHT (MUX) 0 0 GRAY TAKEOVER (+) A 0Ω V (+) FRONT VIEW BLACK REAR VIEW 0 0 0 0 0 0 0 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 0 0 0 0 REMOTE STARTER PARKING LIGHT (+) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT <- OPTIONAL UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT V (+) INPUT ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE WHITE/BLACK - TAKEOVER (+) VEHICLE SIDE WHITE/RED - TAKEOVER (+) CONNECTOR SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GREEN/YELLOW (NC) GRAY/RED - IMMO. (DATA) GRAY/YELLOW (NC) PUSH TO START SWITCH BLACK N00 N00 PTS (-) PTS (-) 0 CONNECTIONS REQUIRED FOR TAKEOVER
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRE CROSS REFERENCE CHART Make MoDel Year DeScrIPtIon name type PoSItIon HYUnDaI PolarItY MoDUle location component locator V I/P-B Black 0 pin 0 Red (+) Dash fuse box, front view A Accessory EM Blue pin Green (+) Driver kick panel C Starter I/P-E White pin 0 Yellow/Black (+) Dash fuse box, rear view A Ignition EM Blue pin 0 Red (+) Driver kick panel C Veloster PTS AT CanH I/P-G White pin 0 Orange (DATA) Dash fuse box, rear view A CanL I/P-G White pin 0 Green (DATA) Dash fuse box, rear view A Parking Light M0 Black pin Orange (MUX) Head light switch ~ Immo. Data EM Blue pin 0 Brown (DATA) Driver kick panel C PTS M Black pin 0 Yellow/Black (-) Push to start switch D PTS M Black pin 0 Yellow/Orange (-) Push to start switch D Takeover I/P-E White pin Pink (+) Dash fuse box, rear view A Brake E Black 0 pin 0 Green (+) Brake switch H
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 IMMO. DATA 0 0 0 0 0 IGNITION (+) ACCESSORY (+) BRAKE (+) E BRAKE SWITCH BLACK N00 CONNECTIONS REQUIRED FOR TAKEOVER A EM - BLUE 0 DRIVER KICK PANEL DASH FUSE BOX FRONT VIEW REAR VIEW STARTER (+) I/P-E - WHITE 0 0 TAKEOVER (+) M0 - BLACK HEADLIGHT SWITCH PARKING LIGHT (MUX) 0 I/P-G - WHITE CANH CANL 0 0Ω V (+) I/P-B - BLACK A 0 0 0 0 0 0 0 0 0 0
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 TYPE - WIRING DIAGRAM - OF 0 0 0 0 0 0 0 0 0 0 REMOTE STARTER PARKING LIGHT (+) OUTPUT TACH (AC) INPUT STARTER (+) OUTPUT TRUNK (-) OUTPUT <- OPTIONAL UNLOCK (-) OUTPUT LOCK (-) OUTPUT V (+) GROUND (-) GWR (-) OUTPUT V (+) INPUT ACCESSORY (+) OUTPUT IGNITION (+) INPUT/OUTPUT BRAKE STATUS (+) INPUT E-BRAKE STATUS (-) INPUT HOOD STATUS (-) INPUT TRUNK STATUS (-) INPUT DOOR STATUS (-) INPUT N/A LEGEND NOT REQUIRED IN (-WAY) NOT REQUIRED IN (-WAY) USE OR HARDWIRE MODE GWR (-) INPUT - BLUE/WHITE GROUND - BLACK V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE (NC) BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK STARTER (+) INPUT - BLACK/WHITE PTS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE WHITE/BLACK - IMMO. (DATA) VEHICLE SIDE WHITE/RED - IMMO. (DATA) CONNECTOR SIDE WHITE (NC) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - HOOD STATUS (-) OUTPUT BROWN/RED - CANH BROWN/YELLOW - CANL ORANGE/BLACK (NC) ORANGE/WHITE - E-BRAKE STATUS (-) OUTPUT ORANGE - BRAKE STATUS (+) OUTPUT PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED - GROUND (-) INPUT GREEN/YELLOW (NC) GRAY/RED - IMMO. (DATA) CONNECTOR SIDE GRAY/YELLOW (NC) CONNECTIONS REQUIRED FOR TAKEOVER PTS SWITCH M0 - GRAY N00 PTS (-) PTS (-) 0 N00
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 INSTALLATION MODE SELECTION Press and release programming button to select installation mode. LED flashes (X) once = LED flashes (X) twice = STANDARD HARDWIRE MODE! Press and hold programming button until LED turns solid GREEN to register selection. After registration, follow Factory Reset Procedure to change installation mode and restart this procedure. MODULE PROGRAMMING PROCEDURE - PTS NOTE I II WARNING: All vehicle doors must be closed and locked prior to remote start sequence. When programming, only one key fob will be used. The other one must be located at least 0 feet away from the vehicle. Æ x ENGINE START STOP Wait, LED will turn solid GREEN for seconds. Push start button once [x] to OFF position. Module Programming Procedure completed. Æ x ENGINE START STOP Push start button twice [x] to ON position.
Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 IDENTIFY VEHICLE YEAR Locate the Vehicle Identification Number (VIN), identify the 0th character then match it to its corresponding year. Æ A Y N T A L D R 0 X Æ a 0 l 0 Y 000 a 00 B M 00 B 0 c n 00 c 0 D P 00 D 0 e r 00 e 0 f S 00 f 0 G t 00 G 0 H V 00 H 0 J W 00 J 0 k X 00 k 0 led StatUS Flashing RED DIaGnoStIcS DUrInG ProGraMMInG DUrInG remote Start WItH IGnItIon off Missing/wrong information from firmware or vehicle Incorrectly programmed Solid RED Waiting for more vehicle information Incorrectly programmed Flashing GREEN Additional steps required to complete programming MODULE DIAGNOSTICS Correctly programmed and operational Incorrectly programmed or connected Not programmed waiting for more vehicle information False ground when running status from remote starter Solid GREEN then OFF Correctly programmed Reset in progress Reset in progress OFF No activity or already programmed Invalid ground when running status from remote starter At rest and ready for a remote start sequence FACTORY RESET PROCEDURE DISCONNECT all s from module EXCEPT the black -PIN standard or optional data. DISCONNECT black -PIN standard or optional data. LED will turn solid red for seconds. RESET COMPLETED. RECONNECT all s. PRESS AND HOLD programming button while connecting either -PIN standard or optional data.! Repeat programming procedure. Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. When LED flashes red, RELEASE programming button.
IMPORTANT Page of FLC-AL(DL)-HK-EN Doc. No.: #### 00 WARNING: READ BEFORE REMOTE NOTICESTARTING THE VEHICLE I All vehicle doors must be closed and locked prior to remote start sequence. Failure to comply will result in remote starter malfunction. TAKE OVER PROCEDURE - PTS - TO THE VEHICLE OWNER NOTE I È All vehicle doors must be closed and locked prior to remote start sequence. TIME RESTRICTIºN COMING UP! Unlock vehicle door using OEM or after-market remote, or door request switch. TIME RESTRICTIºN Within SECONDS from previous step:! Open vehicle door. Enter vehicle. Close vehicle door. Press and release BRAKE pedal. Take over procedure completed. Failure to follow procedure will result in vehicle engine shutdown.