10 Industry Best Year LED Warranty Date Project Type Comments Signal White is standard finish DESCRIPTION High Performance 2" Aperture Wall Wash Surface Mount (HP-2 WW-SM) is a patented, high performance asymmetric surface-mounted luminaire for vertical illumination applications. ORDERING GUIDE Sample Number: HP-2 WW-SM - K - 32' - V - 8 - TW - 120V - C1 - SC HP-2 WW-SM Finelite Series HP-2 WW-SM Reflector (K - Kicker (standard), FO - Fully Open) Length / FineTune Only (Minimum 2', increments accurate to 1/16th (± 1/32"), standard) Length / Pre-qualified Controls by Others (4', 8', 12' multiples standard) Light Output (B - Boosted Standard, V - Very High) LED CRI (8-80 CRI min (standard), 9-90 CRI min) LED Color Temperature (TW - Tunable White. See below for Tunable White controls options) Voltage (120V, 277V) Mounting (C1-1" T-Bar, C2-9/16" T-Bar, C3 - screw slot, C4 - hard ceiling) Circuiting (SC - Single Circuit) Fine TUNE TUNABLE WHITE SYSTEM TUNABLE WHITE CONTROLS OPTIONS: SELECT ONE FineTune controller with FineTune DMX Driver Controls by others with pre-qualified DMX driver Controls by others with pre-qualified DALI driver Controls by others with pre-qualified PoE setup Controls by Lutron with pre-qualified Lutron driver OR
LUMINAIRE FEATURES 4" 2 1/4" 0.4" Mid-powered LEDs T j < 60ºC DIMENSIONS & LIGHT ENGINE Asymmetric distribution is attained with mid-power LEDs distributed evenly and paired with a precise diffuser. KICKER REFLECTOR The standard kicker reflector delivers light high on the vertical surface and provides excellent glare control. The kicker reflector is easily removed for open distribution. THERMAL MANAGEMENT Mid-powered LEDs allow heat to be fully dissipated without the need for additional heat sinks. TUNABLE WHITE FEATURES 6500K 100% 2700K 1% Outstanding Interface MULTIPLE CONTROL ARCHITECTURES Finelite s FineTune DMX, qualified DMX, DALI (open and proprietary), or PoE (Power over Ethernet). TUNABLE WHITE Any CCT between 2700K and 6500K with excellent CRI and R9 values; dimming from 100% to 1%. FINETUNE SYSTEM Award-winning control system, which includes intuitive wall mounted controller, power control center, driver, and mobile app to easily tailor lighting to match user preference.
FINELITE PHOTOMETRY Very High Output - 4' Luminaire with Kicker Total luminaire output: 1500 lumens (375 lumens/foot) Peak Candela Value: 882 @ 25º CCT: 3500K ITL LM79 Report 85137 891 668 446 223 CANDLEPOWER SUMMARY 0.0 22.5 45 67.5 90 Flux 0 485 485 485 485 485 5 652 606 483 378 342 47 15 863 790 470 251 219 145 25 882 829 442 201 184 231 35 795 764 397 168 152 282 45 581 629 333 133 105 277 55 326 436 251 86 62 217 65 196 250 167 43 24 144 75 158 145 88 7 0 87 85 124 97 24 0 0 50 90 93 68 0 0 0 Total Light Output, 3500K, 80 CRI (Lumens) - 4' Luminaire 772 1500 Light Output, 3500K, 80 CRI (Lumens Per Foot) 193 375 Power, 3500K (Watts Per Foot) 2.8 5.4 Efficacy, 3500K, 80 CRI (Lumens Per Watt) 70 70 * Family Correlation based on 4' luminaire 3500K Very High Output (V) test - 120V. ** Correlation based on ITL report: 85137 B - Boosted Standard Output, V - Very High Output Lumen Adjustment Factors - 80 CRI 2700K 0.968 3000K 0.985 3500K 1.000 4000K 1.032 6500K 1.032 Lumen Adjustment Factors - 90 CRI 2700K 0.731 3000K 0.746 3500K 0.760 4000K 0.789 6500K 0.789 Apply a lumen adjustment factor to calculate lumens for the desired CCT and CRI SAMPLE LUMEN ADJUSTMENT CALCULATION Boosted Standard Output (B), 4000K, 90 CRI Lumen Adjustment Factor = 0.789 Total Light Output = 772 lm x 0.789 = 609 lm Total Light Output per Foot = 193 lm/ft x 0.789 = 152 lm/ft Efficacy = watts/foot = 2.8 W/ft 152 lm ft 2.8 W ft = 54 lm/w
CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 0.25" to each end of luminaire. REFLECTORS: The standard kicker (K) reflector delivers light high on the vertical surface. The kicker reflector is easily removed for open distribution (FO). DIFFUSER: Luminaires are standard with frosted diffusers. All diffusers are UV-stabilized and impact resistant virgin acrylic. Frosted diffusers are 0.080" thick. LIGHT OUTPUT: Two lumen packages available, Boosted Standard Output (B) and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output L70 at 200,000+ hours. TUNABLE WHITE DRIVER: Replaceable LED driver. Driver is fully accessible from below ceiling. 120/277V. Power factor >0.90. Total Harmonic Distortion (THD): <20%. Dimming Range: 100-1%. Expected driver lifetime: 100,000 hours. ELECTRICAL: SPECIFICATIONS Emergency Option DMX: Battery backup only Emergency Option DALI: Battery backup, emergency-to-generator/ Inverter wiring Emergency Option LUTRON: Battery backup, emergency-to-generator/ inverter wiring Emergency Option PoE: Contact factory. Battery Backup: Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. Backup battery will operate 6500K in emergency. MOUNTING: Lay-in ceiling types: caddy clip with 1/4-20 stud and nut. Drywall or concrete surfaces (walls or ceilings): 1/4-20 stud and nut (provided by others). DMX INTERCONNECTION CABLES: Luminaires are prewired with plug-and-play interconnection cables to support easy plug-together joining of luminaire runs. If a non-finetune DMX system has been specified, a DMX to RJ45 converter is provided. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 Tiger Drylac s RAL colors. FEED: Standard with one 18-gauge single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. DMX and power feed at same location (standard). Optional 6 flex conduit whips available for power feed. DMX feeds cannot be cut or spliced. DMX feeds should be ordered based on fixed lengths. LENGTHS / FINETUNE ONLY: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32 ). 12-foot maximum section length. LENGTHS / PRE-QUALIFIED CONTROLS BY OTHERS: 4', 8', and 12' sections can be combined to make longers runs. LABELS: Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.73 (G), this luminaire contains an internal driver disconnect. Damp Location. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Qualified drivers by others and optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. TUNABLE WHITE PRE-QUALIFIED DRIVERS BY OTHERS DMX DALI POE set up LUTRON EldoLED EldoLED, Crestron Contact Factory LUTRON NOTE: For a complete list of system option/limitations please click here.
Setback Info and Application Data Very High Output with Kicker Total luminaire output: 1500 Lumens (375 lumens/foot) 19.6 Watts (4.9 watts/foot) CCT: 3500K Luminaire Ceiling Setback Distance Wall Setback Distance - 2' 8 13 19 24 27 28 28 27 25 20 13 9 12 20 29 37 41 42 42 41 37 29 20 13 15 23 33 41 46 48 48 46 41 33 23 15 15 21 27 33 37 39 39 37 33 28 21 16 12 16 20 23 26 27 27 26 23 20 16 12 10 13 15 17 18 19 19 18 17 15 13 11 8 10 11 12 13 14 14 13 12 11 10 9 7 8 9 10 10 10 10 10 10 9 8 7 6 7 7 8 8 8 8 8 8 7 7 6 9' Setback Distance - 2' 6" 8 12 16 19 21 22 22 21 19 16 12 8 11 16 22 27 30 31 31 30 27 22 16 12 14 20 27 32 36 38 38 36 32 27 20 14 Wall Luminaire length: 8' To Bottom of the luminaire: 9'-0" Room reflectances: 80-50-20 Maintained illuminance levels LLF 0.86" 15 21 26 31 35 36 36 35 31 26 20 16 13 17 21 24 27 28 28 27 24 21 17 13 12 14 16 18 20 21 21 20 18 16 14 12 9 11 13 14 15 15 15 15 14 13 11 10 8 9 10 11 12 12 12 12 11 10 9 8 7 8 8 9 9 10 10 9 9 8 8 7 9'