PF Series Thermoplastic Non-Spill Couplings and for Bulk Chemical and Fluid Transfer Bulletin 3800-PF August, 2004
PF Series Non-Spill Quick Couplings Parker PF Series non-spill couplings virtually eliminate the possibility of accidental chemical leaks or spills when lines are connected or disconnected. This makes them the ideal choice whenever a closed system fluid transfer or dispensing process is desired. Constructed from glass filled polypropylene with PTFE coated fluorocarbon tank gaskets, they are inert to most chemicals. This means they provide excellent performance when used on applicators, returnable containers or bulk storage tanks. Quick Coupling Features, Advantages and Benefits Parker Quick Couplings automatically shut off on disconnection to reduce or eliminate spills and leaks Flush face design exhibits minimal spillage and air inclusion upon connection or disconnection reducing system contamination Available in sizes 1 2, 1, and 2 providing quality couplers for most applications Lightweight and reliable push-to-connect operation reduces worker fatigue and increases productivity Plastic composite will not scratch painted or finished surfaces reducing costly rework Parker Quick Couplings offer flexibility and save time when frequent connection and disconnection is required 1 2 PF Couplers and nipples interchange with the Parker 1 2 FS Series stainless steel non-spill couplers and nipples.the FS Coupler provides durability for the end of transfer hoses while the PF offers all the advantages of a plastic coupler on the tank 1 coupler has non-wetted springs reducing system contamination and improving flow Typical Applications Chemical Manufacturing and Distribution Replacement for Camlok Style Fittings and Ball Valves Herbicide, Insecticide and Pesticide Processing Spray Application Equipment Bulk Transfer Barrels Mini Bulk Tanks Chemical Transport and Handling Pharmaceutical Manufacturing
The Safer, Less Expensive Way to Prevent Leaks and Spills When Transferring Almost Any Critical Liquid Use PF Series Quick Couplers and Nipples on tanks and other equipment where stored or dispensed liquids cannot be allowed to leak or spill. Designed with a separate valve in both the nipple and coupler, each component automatically seals when disconnected. And compared to traditional ball valves (which must be closed manually) PF Series Quick Couplers and Nipples actually cost less! Couplers: Nipples: Nipples Tank Mount: Body Size Part Number Port Thread 1/2 inch PF-502-8FP 1/2 NPT 1 inch PF-1002-16FP 1 NPT 2 inch PF-2002-32FP 2 NPT Body Size Part Number Port Thread Tank Mount Thread 1 inch PF-1002-32MB 1 NPT Modified Buttress 1 inch PF-1002-32MP 1 NPT Modified NPS Fittings to Connect PF Couplings to Hose: 7670 Series Fittings 88 Series Hose Clamps Part Number Thread Hose ID Part Number 7670-501 1/2 NPT 1/2 inch 88HC-8 7670-1001 1 NPT 1 inch 88HC-16 7670-2001 2 NPT 2 inch 88HC-32 Performance: 100 PF Series Flow Data Test Fluid: Water 20 10 1/2" 1" 1 2 4 5 6 7 9 10 20 30 40 50 60 708090 100 Flow in GPM 1 Pressure Drop in PSID Specifications: Body Size Part Number Port Thread 1/2 inch PF-501-8FP 1/2 NPT 1 inch PF-1001-16FP 1 NPT 2 inch PF-2001-32FP 2 NPT Dust Caps and Plugs: Coupler Dust Plug Nipple Dust Cap Body Size Part Number Part Number Material 1/2 inch FR-501 FR-502 Synthetic Rubber 1 inch None PFR-1002 Ethylene Propylene 1 inch None PFR-1002-NS* Ethylene Propylene 2 inch None None *No strap, for use with tank-mount nipples. 2" Rated Pressure Pressure Drop Force to Force to Operating Storage Maximum Spillage Body Size Material Springs Seals @ 68 F Rated Flow at Rated Flow Connect Disconnect Temperature Temperature per Disconnect Vacuum Rating 1/2 inch Polypropylene 316 Stainless Steel Fluorocarbon 100 PSI 12 GPM 11.3 PSI 32 lbs 12 lbs +40 F to +140 F -20 F to +140 F 0.01 cu in (0.14 ml) 27.4 Hg 1 inch Polypropylene 316 Stainless Steel Fluorocarbon 60 PSI 20 GPM 3.4 PSI 54 lbs 17 lbs +40 F to +140 F -20 F to +140 F 0.06 cu in (1.0 ml) Consult Factory 2 inch Polypropylene 316 Stainless Steel Fluorocarbon 100 PSI 50 GPM 4.0 PSI 41 lbs 17 lbs +40 F to +140 F -20 F to +140 F 0.18 cu in (3.0 ml) Consult Factory 5 3 8
Parker DynaFlex PVC Standard Duty Suction Hose Series 7560 The DynaFlex 7560 Series hose is designed to withstand full suction and discharge pressure. It will handle a variety of liquid and solid materials such as water, slurry transfer, sewage, air, and chemicals. DynaFlex Series 7560 is a versatile hose for agriculture, mining, construction, and industry. REINFORCEMENT: Rigid white PVC helix TEMP. RANGE: -5 F to +140 F SIZE RANGE: 3/4 inch ID to 8 inch ID DynaFlex PVC Multi-Purpose Suction Hose Series 7561 This extremely lightweight and flexible hose is ideal for general service and low pressure applications. It will handle both full suction and and discharge pressures.the smooth bore design allows unrestricted flow. Green PVC corrugated REINFORCEMENT: Rigid white PVC spiral helix TEMP. RANGE: -5 F to +140 F SIZE RANGE: 1-1/2 inch ID to 3 inch ID GST II General Service Air & Water Hose Series 7031 Green Series 7092 Bright Red Series 7096 Yellow Series 7057 Blue Series 7093 Black An economical and versatile general purpose hose which is excellent for air and water service as well as many agricultural chemicals including LASSO herbicide. The EPDM tube and cover resists heat, sunlight, ozone, and weathering. GST II hose exceeds RMA Class C medium oil resistance requirements. It is suitable for applications such as oil mist lines but not suitable for the transfer of petroleum products. Closely plied reinforcement of high tensile textile cord provides excellent coupling retention and kink resistance. Black EPDM EPDM Colors referenced above REINFORCEMENT: Multiple textile spirals TEMP. RANGE: -40 F to +212 F SIZE RANGE: 3/16 inch ID to 1-1/2 inch ID Blue Thunder UHMW Hose Series 7373T This corrugated hose provides flexibility and durability in chemical full suction and discharge applications. The Ultra High Molecular Weight (UHMW) clear polyethylene tube will handle 98% of the most common chemicals without leaching and contaminating the media being conveyed. Clear UHMW Blue EPDM corrugated REINFORCEMENT: Textile plies with helix wire TEMP. RANGE: -40 F to +250 F SIZE RANGE: 1 inch ID to 4 inch ID Warning: Elevated temperatures can change chemical resistance ratings. Check chemical concentration and compatibility.
Innovative Solutions with Unique Advantages: Premier Customer Service Dedicated Field Sales Force Large Distribution Network Application Engineering Assistance ISO 9001/QS 9000 Certified Variety of Sizes and End Configurations Flexible Manufacturing Processes State-of-the-Art Technology The World s Largest Manufacturer of Quick Couplings Other Quick Coupling Products Hydraulic Quick Couplings Various Configurations Double Shut-Off Single Shut-Off Straight Through Pneumatic Quick Couplings Industry Interchanges Manual Connect Push-to-Connect Exhaust Styles Swivels Various End Configurations In-Line Styles 90 Styles Thermoplastic Couplings Various Sizes Chemical Compatibility Push-to-Connect Non-Spill Styles Check Valves In-line Styles Cartridge Styles Split-flange Styles 5,000 Configurations Diagnostic Equipment Digital Recording Meters Digital Gauges Diagnostic Quick Couplings Sensors and Accessories Bulletin 3800-PF For additional information: Quick Couplings Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis,MN 55427 Phone: 763-525-4240 Fax: 763-544-3418 Parker Hannifin Corporation 17295 Foltz Industrial Parkway Cleveland,OH 44149 Phone: 440-286-2120 Fax: 440-286-2230 www.parker.com/quickcouplings PRINTED IN U.S.A. GR, MP 5M 08/04