MADE FOR SOIL COMPACTION. WELL-DESIGNED. SAFE. INTELLIGENT OPERATION. BOMAG MULTI-PURPOSE COMPACTOR. When work demands high-quality solutions: this articulated, radio-controlled, trol, you have everything safely under con- rather not go. With the radio remote con- multi-purpose compactor gets to the trol. Including your site. places where operators can t go or would
SUPERIOR COMPACTION. With an operating weight of around 1.6 t, this multi-purpose compactor achieves outstanding compaction results on soil compaction in trenches, sewers and on pipeline construction.
EARTHWORKS EVOLUTION. The BOMAG BMP 8500 articulated, multi-purpose compactor was specially designed for earthworks; it is particularly suitable for compaction on cohesive soils in trenches, backfills, sewer and pipeline construction, and sub-structural and foundation work. And anywhere space gets tight or the job gets hazardous. REMOVABLE DRUM EXTENSION WITH PAD FEET. The working width can be easily varied between 610 and 850 mm with the drum extensions which come as standard. They are ready for use in any trench in minutes. ALSO AVAILABLE WITH SMOOTH DRUMS. The BOMAG BMP 8500 can also be optionally equipped with a smooth drum for improved surface quality without pad footprints, even on sandy materials. 37
SUPERIOR TECHNOLOGY. MOST RELIABLE ENGINE Both the modern KUBOTA engine and BOMAG ECOMODE provide the lowest operating costs. If the remote control is not activated, the engine will automatically change to idle speed after a few seconds. That saves hard cash. QUICKLY EXTENDED Reliability from experience: the original BOMAG drum extender allows you to adapt the working width from 610 to 850 mm in just minutes. 38
RELIABLE RADIO CONTROL With radio/cable remote control, problems caused by intense sunlight, shoring work, or the simultaneous use of other machines are eliminated. Frequency adjustments and malfunctions due to mechanical wear no longer apply. SAFE RESPONSE If the operator enters into the close vicinity of the machine, the travel system is automatically stopped by BOSS (BOMAG Operator Safety System) to prevent accidents. Nothing could be safer. BUILT-IN SAFETY The fully encased exciter housing prevents water and dirt ingress, as well as abrasion to the hydraulic hoses. This increases operational safety and prevents costly repair work over the long term. Technical modifications may be required depending on the country of distribution. 39
KNOWING WHEN THE JOB IS DONE. The BMP 8500 remote-controlled multi-purpose compactor is best used when conditions become confined or inaccessible. Featuring legendary BOMAG quality, this is the first machine of this type to display compaction progress. Guessing is now a thing of the past. THE OPERATOR KNOWS WHEN COMPACTION IS FINISHED. Unique in compaction technology: The BOMAG ECONOMIZER is integrated into the hood of the BMP 8500, which means it is easy to see and well protected. The unit aids the operator in achieving optimum compaction results and could not be simpler, as there is no need for activation and calibration. The ECONOMIZER automatically determines compaction progress. This allows the operator to identify weak spots in the subsoil continuously and accurately, and to respond appropriately in good time. Expensive reworking is no longer necessary. In addition, unnecessary passes and overcompaction are also avoided which results in time savings of up to 25%. 40
EARTHWORKS REVOLUTION. The first remote-controlled, multipurpose compactor that knows when it s finished. With ECONOMIZER, the operator knows when optimum compaction has been achieved.
MULTI PURPOSE COMPACTOR BMP 8500 PERFORMANCE DATA Machine type Compaction output (m3/h) at recommended soil layer thicknesses Gravel, sand Mixed soil Silt, clay BMP 8500 52-82 52-82 30-40
Technical Data Shipping dimensions in m3 BMP 8500 2,056 Standard Equipment ECOMODE Drum extensions (610/850mm) Hydrostatic articulated steering, maintenance free Combination remote control cable/radio Dual directed-vibration system Two travel speed ranges 2 amplitudes Intelligent Vibration Control (IVC) Electric starter Hydrost. sevice brake Hydro-mechanical parking brake BOMAG Operator Safety System 2 scrapers per drum Battery disconnect switch Automatic shutdown at low oil level Automatic engine shut down at a lateral tipping angle of 45 Full prot. hoods made of impact resistant compound material Single point lifting device Lockable engine cover and dash board Easy Service Concept -Diagnostic module with fault code display -Hour meter -foldable full protection hood 3-2-1 Warranty Optional Equipment Environmentally compliant hydraulic oil Special painting Mobile quick charger Scrapers 850mm Service Kit ECONOMIZER Dimensions in mm A D H K L S W W1 BMP 8500 Technical Data 1000 520 1275 197 1897 16 850 610 Weights Operating weight CECE... Basic weight... Average axle load CECE... kg kg kg BOMAG BMP 8500 1.595 1.585 798 Dimensions Basic working width... mm 850 Driving Characteristics Speed (1), forward... Speed (1), reverse... Speed (2), forward... Speed (2), reverse... Max. gradeability without/with vibr.... Drive Engine manufacturer... Type... Emission stage... Cooling... Number of cylinders... Performance ISO 3046... Speed... Fuel... Drive system... Driven drum... Fuel comsump. aver. during operation... Brakes Service brake... Parking brake... km/h km/h km/h km/h % kw min-1 Exciter system Vibrating drum... Drive system... Frequency... Hz Amplitude... mm Centrifugal force... kn l/h 1,2 1,2 2,8 2,8 55/45 Kubota D 1005 4 final water 3 14,5 2.600 diesel hydrost. 4 3,1 hydrost. hydromec. front + rear hydraulic 42/42 1,12/0,56 72/36 Capacities Fuel... l 24,0 Technical modifications reserved. Machines may be shown with options. BOMAG Hellerwald D-56154 Boppard P.O. Box 5162 Tel. (0)6742-1000 Fax (0)6742-3090 PRE 720 11 001 170215 Sa08