INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPING PORTABLE POWER CABLES

INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPING PORTABLE POWER CABLES

37- TYPE G-GC 3/C HEAVY-DUTY EASY-STRIP JACKET 000 VOLTS FEATURES Highly durable, abrasion-resistant CPE jacket specially designed and cured for easy stripping Outstanding Nexans AmerCable engineering support APPLICATION Manufactured for use with static or slow-moving industrial equipment, including light-duty mining applications. Nexans AmerCable INDUSTRIAL GRADE Type G-GC features a reinforced jacket that is specially designed for easy stripping and cable preparation. This cable is designed for applications where grounding conductors and a ground check conductor are required. Recommended maximum continuous conductor temperature is 90 C. Suitable for shallow water submersion when correctly terminated and sealed. Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection. Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-3/ NEMA WC-5. RATINGS & APPROVALS Mine Safety & Health Administration (MSHA) Pennsylvania Department of Environmental Protection UL listed Type G-GC meeting requirements of UL 50 and UL portable power cable file E975 Specially Designed & Cured CPE Jacket for Easier, Faster Stripping! S Bare copper 90 C ethylene-propylene rubber (EPR) GROUND WIRES () Bare copper with polyester tape separator and covered with green EPR. Also available with uncovered ground. GROUND CHECK Bare copper with polyester tape separator and covered with yellow Ethylene Propylene Rubber (EPR). JACKET Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking. AMERCABLE E975 TYPE G-GC [Size] 3/C 000V 90C WET OR DRY(UL) SUN RES OIL RESISTANT C -0C FT5 [MSHA] CSA constructions available upon request 37- - 00 00 00 00 00 00 00 030 00 50 /0 /0 50 POWER S WIRES PER 33 53 7 MILS GROUNDING S WIRES PER 0 9 0 9 7 5 /0 33 GROUND CHECK 0 0 0 0.070.05..357..30.79.90.050.30.5.935 9 770 9 0 79 0 50 30 375 33 73 5 Jacket Heavy-Duty (HD) black CPE is standard. Colored HD CPE jackets available upon request. Ground Check Conductor Minimum 9 strands (7X7). EP insulation for EASY STRIPABILITY..030" minimum average insulation for 0 /.05" minimum average insulation for *Ampacity Based on continuous duty at 90 C conductor temperature. Manufactured by Nexans AmerCable (70) -99 (0) 3-5 Fax (70) -93 5 7 5 77 05 37 7 3 35 33 53

37-3 TYPE G /C HIGHLY DURABLE EASY-STRIP JACKET 000 VOLTS FEATURES Highly durable, abrasion-resistant CPE jacket specially designed and cured for easy stripping Outstanding Nexans AmerCable engineering support APPLICATION Manufactured for use with static or slow-moving industrial equipment, including light-duty mining applications, or three-phase AC systems which require a ground. Nexans AmerCable INDUSTRIAL GRADE Type G features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation. Recommended maximum continuous conductor temperature is 90 C. Suitable for shallow water submersion when correctly terminated and sealed. Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection. Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-3/ NEMA WC-5. RATINGS & APPROVALS Mine Safety & Health Administration (MSHA) Pennsylvania Department of Environmental Protection UL listed Type G meeting requirements of UL 50 and UL portable power cable file E975 Specially Designed & Cured CPE Jacket for Easier, Faster Stripping! S Bare copper 90 C ethylene-propylene rubber (EPR) GROUND WIRES () Bare copper insulated with green EP0 JACKET Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE G [] /C 90C WET OR DRY 000V SUN RES OIL RESISTANT C -0C FT5 [MSHA] CSA constructions available upon request 37-3- POWER S WIRES PER MILS GROUNDING S WIRES PER 00BC 00BC 00BC 00BC 00BC 00BC 00BC 030BC 00BC 50BC BC BC /0 /0 50 33 53 7 0 7 5 3 9 9 9.09.5.309.5.30.3.95.0.5.590.900 3.300 75 93 7 339 37 53 77 0797 5 7 5 77 05 37 7 3 35 33 53 Jacket Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. *Ampacity Based on continuous duty at 90 C conductor temperature, with not more than three current carrying conductors. Bailey Road El Dorado, Arkansas USA www.nexansamercable.com e-mail: industrial@nexansamercable.com _7

37-0 TYPE W /C PORTABLE POWER EASY-STRIP JACKET 000 VOLTS FEATURES Highly durable, abrasion-resistant CPE jacket specially designed and cured for easy stripping Outstanding Nexans AmerCable engineering support APPLICATION Manufactured for heavy-duty or temporary power supply service, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors and other mobile equipment applications. Nexans AmerCable INDUSTRIAL GRADE Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation. Recommended maximum continuous conductor temperature is 90 C. Suitable for installation in air, ducts, shallow water or direct burial. Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection. Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-3/ NEMA WC-5. RATINGS & APPROVALS Mine Safety & Health Administration (MSHA) Pennsylvania Department of Environmental Protection UL listed Type W meeting requirements of UL 50 and UL portable power cable file E975 Specially Designed & Cured CPE Jacket for Easier, Faster Stripping! S Bare copper SEPARATOR For easy stripping of insulation 90 C ethylene-propylene rubber (EPR) JACKET Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE W [] /C 90C WET OR DRY 000V SUN RES OIL RESISTANT C -0C FT5 [MSHA] CSA constructions available upon request Manufactured by Nexans AmerCable (70) -99 (0) 3-5 Fax (70) -93

TYPE W /C 37-0- 00BC 00BC 00BC 00BC 00BC 00BC 00BC 030BC 00BC 50BC BC BC /0 /0 50 POWER S WIRES PER 33 53 7 MILS 0. 0.5 0.5 0.55 0.73 0.7 0.30 0.9 0..05.55.300 37 9 3 7 5 35 7 99 097 7 95 05 0 90 0 300 05 55 570 700 Jacket Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. *Ampacity Based on continuous duty at 90 C conductor temperature Bailey Road El Dorado, Arkansas USA www.nexansamercable.com e-mail: industrial@nexansamercable.com

37-30/3 TYPE W -3/C PORTABLE POWER EASY-STRIP JACKET 000 VOLTS FEATURES Highly durable, abrasion-resistant CPE jacket specially designed and cured for easy stripping Outstanding Nexans AmerCable engineering support APPLICATION Manufactured for heavy-duty or temporary power supply service, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors and other mobile equipment applications. Nexans AmerCable INDUSTRIAL GRADE Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation. Recommended maximum continuous conductor temperature is 90 C. Suitable for installation in air, ducts, shallow water or direct burial. Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection. Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-3/ NEMA WC-5. RATINGS & APPROVALS Mine Safety & Health Administration (MSHA) Pennsylvania Department of Environmental Protection UL listed Type W meeting requirements of UL 50 and UL portable power cable file E975 Specially Designed & Cured CPE Jacket for Easier, Faster Stripping! S Bare copper 90 C ethylene-propylene rubber (EPR) SEPARATOR For easy stripping of insulation JACKET Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE W [] #/C 90C WET OR DRY 000V SUN RES OIL RESISTANT C -0C FT5 [MSHA] CSA constructions available upon request Manufactured by Nexans AmerCable (70) -99 (0) 3-5 Fax (70) -93

TYPE W /C 00BC 00BC 00BC 00BC 00BC 00BC 00BC 030BC 00BC 50BC BC BC /0 /0 50 TYPE W 3/C POWER S WIRES PER 33 53 7 MILS.3.90.0..9.509.5.79.90.00.300.0 3 59 9 5 3 059 7 30 339 55 7 99 30 7 0 3 7 33 3 0 3 *Ampacity Based on continuous duty at 90 C conductor temperature, with not more than two current carrying conductors. 37-30- 37-3- 00BC 00BC 00BC 00BC 00BC 00BC 00BC 030BC 00BC 50BC BC BC /0 /0 50 POWER S WIRES PER 33 53 7 MILS.9.00..9.70.9.70.57.00.30.5.93 5 3 5 55 7 9 3 09 533 7 5 7 5 77 05 37 7 3 35 33 53 Jacket Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. *Ampacity Based on continuous duty at 90 C conductor temperature, with not more than three current carrying conductors. Bailey Road El Dorado, Arkansas USA www.nexansamercable.com e-mail: industrial@nexansamercable.com

37-3/33 TYPE W -5/C PORTABLE POWER EASY-STRIP JACKET 000 VOLTS FEATURES Highly durable, abrasion-resistant CPE jacket specially designed and cured for easy stripping Outstanding Nexans AmerCable engineering support APPLICATION Manufactured for heavy-duty or temporary power supply service, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors and other mobile equipment applications. Nexans AmerCable INDUSTRIAL Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation. Recommended maximum continuous conductor temperature is 90 C. Suitable for installation in air, ducts, shallow water or direct burial. Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection. Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-3/ NEMA WC-5. RATINGS & APPROVALS Mine Safety & Health Administration (MSHA) Pennsylvania Department of Environmental Protection UL listed Type W meeting requirements of UL 50 and UL portable power cable file E975 Specially Designed & Cured CPE Jacket for Easier, Faster Stripping! S Bare copper SEPARATOR For easy stripping of insulation 90 C ethylene-propylene rubber (EPR) JACKET Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE W [] #/C 90C WET OR DRY 000V SUN RES OIL RESISTANT C -0C FT5 [MSHA] CSA constructions available upon request Manufactured by Nexans AmerCable (70) -99 (0) 3-5 Fax (70) -93

TYPE W /C 00BC 00BC 00BC 00BC 00BC 00BC 00BC 030BC 00BC 50BC BC BC /0 /0 50 POWER S WIRES PER 33 53 7 MILS.00.05..3.9.75..03.5..5 3.00 7 7 00 50 99 33 7 3 0 50 7305 9 5 7 5 77 05 37 7 3 35 33 53 TYPE W 5/C 37-3- 37-33- 00BC 00BC 00BC 00BC 00BC 00BC 00BC 030BC 00BC /0 /0 POWER S WIRES PER 33 53 MILS.0.0.00...09.5.30.535 90 999 377 975 79 303 359 35 57 5 7 5 77 05 37 7 3 Jacket Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. *Ampacity Based on continuous duty at 90 C conductor temperature, with not more than three current carrying conductors. Bailey Road El Dorado, Arkansas USA www.nexansamercable.com e-mail: industrial@nexansamercable.com

37-9 TYPE SOOW CABLE 0 VOLTS 90 C MSHA APPROVED CSA & UL CERTIFIED PORTABLE CORD FEATURES n Available in - n Highly flexible and durable n Excellent resistance to oil, water and moisture n Excellent tensile strength, elongation and aging characteristics for longer service life n Excellent abrasion resistance n UL Listed for indoor and outdoor use n Sunlight (UV), ozone and weather exposure resistant n Suitable for immersion in water if properly terminated and installed APPLICATION Nexans AmerCable s Type SOOW is a flexible, highly durable portable power cable manufactured for indoor or outdoor commercial and industrial-grade applications. Suitable for extra-hard usage per NEC Article 00. S Flexible bare copper Color-coded Ethylene Propylene (EP) rubber (see chart for color coding) JACKET Black heavy-duty Chlorinated Polyethylene (CPE) Jacket: Cable identification via permanent marking. AMERCABLE (UL) WATER RESISTANT TYPE SOOW 90C #/C [] 0V-0C FT CSA TYPE SOOW 90C #/C [] 0V FT WATER RESISTANT EP/CPE -0C [MSHA] RoHS RATINGS & APPROVALS n 0V (UL) SOOW n UL Flexible Cord - UL n Nexans AmerCable TYPE SOOW Mining Cables meet or exceed CSA Standards C. #9 n MSHA n Flame Rated FT- n Rated -0 C up to 90 C COLOR CODE /C 3/C /C 5/C Black Black Black Black White White White White - Green Red Red - - Green Green - - - Orange Jacket Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. Manufactured by Nexans AmerCable (70) -99 (0) 3-5 Fax (70) -93

PART NO. 37-9 S /30 0.030 0.0 0.355 7 3 3 /30 0.030 0.0 0.375 7 /30 0.030 0.0 0.5 9 55 5 /30 0.030 0.0 0. 30 50 /30 0.030 0.0 0.35 7 50 3 /30 0.030 0.0 0.05 90 5 /30 0.030 0.0 0.35 559 5 /30 0.030 0.0 0.50 5 507 /30 0.05 0.0 0.50 9 50 3 /30 0.05 0.0 0.535 55 509 /30 0.05 0.0 0.5 50 5 /30 0.05 0.0 0.55 5 55 5/30 0.05 0.0 0.5 3 5 3 5/30 0.05 0.0 0.0 5 57 5/30 0.05 0.0 0.55 5 5 5 5/30 0.05 0.0 0.70 35 0 0 0/30 0.05 0.0 0.5 30 3 0 0/30 0.05 0.0 0. 9 0 0 0/30 0.05 0.0 0.75 3 5 5 0 0/30 0.05 0.0 0.775 0 Other Sizes Available. Contact Nexans AmerCable for more information STRAND JACKET DIAMETER LBS./ Suitable for extra-hard usage per NEC Article 00 Bailey Road El Dorado, Arkansas USA www.nexansamercable.com e-mail: industrial@nexansamercable.com

INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPING PORTABLE POWER CABLES Nexans AmerCable is an ISO 900 certified cable manufacturer that combines leading-edge manufacturing technology, innovative thinking, and high quality service to deliver the finest industrial cable products available. Our professional engineers and sales force work with you to create innovative, cost effective project solutions. Nexans AmerCable Bailey Road El Dorado, AR USA 0-3-5 70--99 Fax: 70--59 email: industrial@nexansamercable.com www.nexansamercable.com 07, AmerCable Incorporated _7