TRACKED EXCAVATOR LC MAX. OPERATING WEIGHT: 589 kg (353 lb) 665 kg (3677 lb) WITH BLADE MAX. ENGINE POWER: 73 kw (98 hp) E I H K F HD HD L M G C D A B STATIC DIMENSIONS MONOBOOM Dimensions in millimetres (ft-in) A Track length on ground 2865 (9-5) B Undercarriage overall length 367 (-) C Track gauge 99 (6-6) D Width over tracks (5mm trackshoes) 29 (8-2) D Width over tracks (6mm trackshoes) 259 (8-6) D Width over tracks (7mm trackshoes) 269 (8-) D Width over tracks (85mm trackshoes) 28 (9-) Dipper lengths 2.m (6ft in) 2.5m (8ft 2in) 3.m* (9ft in) E Transport length with Monoboom 737 (2-2) 738 (2-3) 733 (2-) F Transport height with Monoboom 285 (9-) 285 (9-) 32 (-8) Dimensions in millimetres (ft-in) G Counterweight clearance 9 (3-) H Tail swing radius 2 (-7) I Width of superstructure 25 (8-2) Height over cab 28 (9-3) K Height over grab rail 28 (9-3) L Ground clearance 6 (-6) M Track height 8 (2-8) *Machine in transport position
MAX. OPERATING WEIGHT: 66 kg (36597 lb) 736 kg (38272 lb) WITH BLADE MAX. ENGINE POWER: 73 kw (98 hp) E I H K F L M G C D A B STATIC DIMENSIONS T.A.B. Dimensions in millimetres (ft-in) A Track length on ground 2865 (9-5) B Undercarriage overall length 367 (-) C Track gauge 99 (6-6) D Width over tracks (5mm trackshoes) 29 (8-2) D Width over tracks (6mm trackshoes) 259 (8-6) D Width over tracks (7mm trackshoes) 269 (8-) D Width over tracks (85mm trackshoes) 28 (9-) Dipper lengths 2.m (6ft in) 2.5m (8ft 2in) 3.m* (9ft in) E Transport length with T.A.B 7675 (25-2) 76 (25-) 825 (26-8) F Transport height with T.A.B. 285 (9-) 285 (9-) 333 (-) Dimensions in millimetres (ft-in) G Counterweight clearance 9 (3-) H Tail swing radius 2 (-7) I Width of superstructure 25 (8-2) Height over cab 28 (9-3) K Height over grab rail 28 (9-3) L Ground clearance 6 (-6) M Track height 8 (2-8) *Machine in transport position
Model Type Rated power (ISO 899 (SAE 995)) Piston Displacement Injection Air Filtration Cooling Starting system Batteries Alternator Refuelling pump Swing motor Swing brake Final drive Swing speed Swing gear Swing lock Construction Recovery point Upper & lower rollers Track adjustment Track type Track idler Track shoes ENGINE SWING SYSTEM Rollers and Shoes (each side) Upper rollers 2 Lower rollers 7 Track shoes Isuzu X EU Stage IIIA EPA Tier 3 compliant. Water cooled, -stroke, -cylinder in-line, common rail direct injection, turbocharged intercooled diesel. 73kW (98hp) at 2rpm. 2.999 litres (.6 UK gal). Electronic injection. Dry element with secondary safety element and in cab warning indicator. Large capacity radiator. 2 volt.5kw. 2 x 2 volt Heavy Duty. 2 volt 5 amp. Electric type. Axial piston type. Hydraulic braking plus automatic spring applied disc type parking brake. Planetary reduction. 2.8 rpm. Large diameter, internally toothed fully sealed grease bath lubricated. Multi position switchable brake. UNDERCARRIAGE Fully welded, X frame type with central bellyguarding and sloping sidemembers with dirt relief holes under top rollers. Front and rear. Heat treated, sealed and lubricated. Grease cylinder type. Sealed and lubricated. Sealed and lubricated, with spring cushioned recoil. 5mm (2in.) triple grouser 6mm (2in.) triple grouser 7mm (28in.) triple grouser 85mm (33in.) triple grouser HYDRAULIC SYSTEM A variable flow load sensing system with flow on demand, variable power output and servo operated, multi-function open centre control. Machine auto warm up standard maximises performance in cold conditions. Pumps Main pumps Maximum flow Servo pump Maximum flow Fan drive 2 variable displacement axial piston type. 2 x 2 L/min (2 x 27.3 UK GPM). Gear type. 2 L/min (.6 UK GPM). Gear type. L/min (8.8 UK GPM). Control valve A combined four and five spool control valve with auxiliary service spool as standard. When required twin pump flow is combined to boom and dipper services for greater speed and efficiency. Relief valve settings Boom/Arm/Bucket 3 bar (55lbf/sq.in) With power boost 33 bar (975lbf/sq.in) Swing circuit 279 bar (5lbf/sq.in) Travel circuit 33 bar (975lbf/sq.in) Pilot control bar (569lbf/sq.in) A separate Cushion Control valve in the servo system provides cushioning of the boom and dipper spools selection and quick warm-up of the servo system. Hydraulic cylinders Double acting type, with bolt-up end caps and hardened steel bearing bushes. End cushioning is fitted as standard on boom, dipper and bucket rams. Optional hose burst check valves available for boom and dipper rams. Filtration The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life. In tank 5 micron, suction strainer. Main return line micron, fibreform element. Plexus Bypass line.5 micron, paper element. Pilot line micron, paper element. Hydraulic hammer return micron, reinforced microform element. Cooling Worldwide cooling is provided as part of a single face cooling pack, in conjunction with the engine water cooler. Type Travel motors Final drive Service brake Park brake Gradeability Travel speed Tractive effort TRACK DRIVE Fully hydrostatic, three speed with autoshift between high and medium speed. Variable swash axial piston type, fully guarded within undercarriage frame. Planetary reduction, bolt-on sprockets. Hydraulic counter balance valve to prevent overspeeding on gradients. Disc type, spring applied, automatic hydraulic release. 7% (35 deg) continuous. High 5. km/h (3.2 mph). Mid 3. km/h (.9 mph). Low 2. km/h (.2 mph). 26kN (28326lbf).
EXCAVATOR END MONOBOOM Monoboom available along with a choice of dipper lengths to suit the requirements of reach, dig-depth, loadover height, tearouts and site versatility. Reserve strength is built into the fully welded structures for hydraulic hammer and other arduous operations. Fabricated bucket tipping links are provided with a choice of lift points. Strong, durable construction, large cross sections and multi plate fabrications to withstand high stress applications. The.7m (5ft 5in) boom is designed to ensure the optimum digging envelope when matched with the three dipper lengths. Low maintenance bronze alloy bushes with graphite plugs are fitted to boom base and boom to dipper pivots resulting in hour greasing intervals at these points. EXCAVATOR END T.A.B. Triple Articulated Boom (T.A.B.) with a choice of dipper lengths to suit the requirements of reach, dig-depth, loadover height, tearouts and site versatility. Reserve strength is built into the fully welded structures for hydraulic hammer and other arduous operations. Fabricated bucket tipping links are provided with a choice of lift points. AMS ADVANCED MANAGEMENT SYSTEM Four selectable working modes link the operators control movements with the engine and hydraulic systems to maximise productivity and efficiency. A (Auto) Up to % engine power and % flow. Gives variable power and speed depending on the operator s input, matching the demand for output and efficiency to the job. Power boost is automatically activated in this mode should hard conditions be encountered. Auto idle cuts in after a period of inactivity (between 5 and 3 seconds as set by the operator) E (Economy) 8% engine power. 95% of hydraulic flow maximises economy while maintaining excellent output. P (Precision) 55% engine power. 9% of hydraulic flow for fine control of grading operations. L (Lifting) 55% engine power. 63% of hydraulic flow with permanent power boost for maximum lifting power and control. The Auto mode allows the AMS processor to select the optimum operational performance to match the demands of the job while the three alternative modes give precise matching of application when specific tasks are undertaken. The adjustable position monitor mounted on the front right hand pillar of the cab gives the operator a constant read out of mode, tracking range, operating temperature and a host of other information, while retaining excellent visibility of the monitor and the job being carried out. The required flow for hammer applications can be set and stored in the AMS memory and is automatically activated whenever the hammer pedal is depressed. A maintenance indicator warns of imminent service needs, and all servicing and basic checks can be carried out using only the in cab display. CAB CONTROLS Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All screens are tinted to improve in cab conditions. Fully opening front screen is very smooth to operate and as the lower screen is stored within the top screen frame it makes complete front screen opening easy, fast and convenient. Fresh air ventilation available from opening door window, opening slot in front screen and fully opening front screen. Parallelogram wash wiper for upper screen ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand side of the roof screen so as not to affect bucket visibility when loading. Optional lower screen wiper available. Fresh air ventilation and heater with windscreen demister. Infinitely variable blower speed, temperature and recirculation control. Climate control. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Radio with digital tuner fitted into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower console. 2v power point and mobile phone holder built into the right hand console. Courtesy light can be operated from ground level and is illuminated for five minutes or until switched off improving operator access at night. Cab mounted roller blind protects operator from suns glare through front or top screens. Excavator Tracks Auxiliary Control isolation Engine speed Engine stop Horn Blade (optional) All servo lever operated to ISO control pattern, independently adjustable to the seat. Individually servo operated by foot pedal or hand lever. Speed selection via joystick button. Via servo operated foot pedal. Via gate lock lever at cab entrance or panel switch. Dial type throttle control plus servo lever mounted one-touch idle control or separate selectable auto-idle with adjustable time delay using AMS. Ignition key operated and seperate shut-down button. Operated via servo lever mounted button. Separate lever in cab.
SERVICE CAPACITIES Litres UK Gal Fuel tank 62 35.5 Engine coolant. 3. Engine oil.6 2.6 Swing reduction gear 2.2.5 Track reduction gear (each side) 3..7 Hydraulic system 2. 27.3 Hydraulic tank 73. 6. STANDARD / OPTIONAL EQUIPMENT Standard Equipment: Radiator fan guard; Cold start pre-heat; Auto engine warm up; Double element air cleaner; Heavy-duty alternator; Electrics isolator; Heavy-duty batteries; Cab & engine soundproofing; Cab heater & screen demister; Tinted glass; Interior light; Coat hook; Cigarette lighter; Ashtray; Operator s storage box with cargo net; Removable floormat; Windscreen wash/wipe; Plug-in power socket; Automatic power boost; Auto-idle; One-touch engine speed control; Hydraulic cushion control; Plexus hydraulic oil filtration; HSP pressure test points; Auxiliary pipework mounting brackets; Work lights boom & mainframe mounted; Undercarriage belly guarding; Upper structure under covers; Swing system cover; External mirrors; Handrail & non slip walk ways; Quick connect engine oil drain pipe; Front screen blind; Quick connect fuel tank drain pipe. Optional Equipment: Hose burst check valves & overload warning system; Tipping link mounted lift points; General purpose buckets; Ditching/grading buckets; Quickhitches; Hydraulic hammers; Auxiliary pipework (full and low flow); Air conditioning or climate control; Additional cab mounted work lights; Rotating beacon; Rain guard; Biodegradeable oil; Air suspension seat with heated pad and lumbar support adjustment; Electric refuelling pump; Track guides; Lower screen wiper; Radio; Backfilling/ stabilising blade; Various track plate widths; Cab guard protection screens; Mesh screen guard; Seat belt; Fire extinguisher; Vandal cover kit; Travel alarm. WEIGHTS AND GROUND BEARING PRESSURES Machine equipped with.7m Monoboom, 2.5m Dipper, Standard Excavating Bucket 2mm wide, operator and full fuel tank. Shoe Width Operating Weight Bearing Pressure 5mm (2in.) 79kg (3269lb).7kg/sq. cm. (6.68lb/sq. in.) 6mm (2in.) 598kg (33285lb).kg/sq. cm. (5.69lb/sq. in.) 7mm (28in.) 5298kg (33276lb).35kg/sq. cm. (.98lb/sq. in.) 85mm (33in.) 555kg (328lb).29kg/sq. cm. (.2lb/sq. in.) Machine equipped with 5.m T.A.B., 2.5m Dipper, Standard Excavating Bucket, operator and full fuel tank. Shoe Width Operating Weight Bearing Pressure 5mm (2in.) 5395kg (339lb).9kg/sq. cm. (6.97lb/sq. in.) 6mm (2in.) 572kg (367lb).2kg/sq. cm. (5.97lb/sq. in.) 7mm (28in.) 592kg (3558lb).36kg/sq. cm. (5.2lb/sq. in.) 85mm (33in.) 655kg (3566lb).3kg/sq. cm. (.27lb/sq. in.) OPTIONAL BLADE A B C D A Blade height mm (ft-in) 55 (-8) B Blade lift above ground mm (ft-in) (-5) C Blade cut below ground mm (ft-in) 52 (-8) D Blade forward of track mm (ft-in) (-) Dozer width 5mm tracks mm (ft-in) 25 (8-3) Dozer width 6mm tracks mm (ft-in) 26 (8-7) Dozer width 7mm tracks mm (ft-in) 27 (8-) Additional weight with blade 5mm tracks kg (lb) 77 (67) 6mm tracks kg (lb) 753 (66) 7mm tracks kg (lb) 759 (673)
WORKING RANGE MONOBOOM Boom length:.7m (5ft 5in) Dipper length: 2.m (6ft in) A Maximum digging reach mm (ft-in) 797 (26-2) B Maximum digging reach (on ground) mm (ft-in) 782 (25-8) C Maximum digging depth mm (ft-in) 55 (6-) D Maximum digging height mm (ft-in) 882 (28-) E Maximum dumping height mm (ft-in) 63 (2-) F Maximum vertical wall cut depth mm (ft-in) 58 (5-) G Minimum swing radius mm (ft-in) 25 (6-9) Bucket rotation 82 Maximum dipper tearout (ISO 65) kgf (lbf) 755 (6569) Maximum bucket tearout (ISO 65) kgf (lbf) 9375 (2667) A B G 9 8 7 Dipper length: 2.5m (8ft 2in) A Maximum digging reach mm (ft-in) 83 (27-) B Maximum digging reach (on ground) mm (ft-in) 82 (26-) C Maximum digging depth mm (ft-in) 555 (8-3) D Maximum digging height mm (ft-in) 99 (29-) E Maximum dumping height mm (ft-in) 67 (22-) F Maximum vertical wall cut depth mm (ft-in) 98 (6-) G Minimum swing radius mm (ft-in) 25 (6-9) Bucket rotation 82 Maximum dipper tearout (ISO 65) kgf (lbf) 668 (72) Maximum bucket tearout (ISO 65) kgf (lbf) 9375 (2667) D E 6 5 3 2 Dipper length: 3.m (9ft in) A Maximum digging reach mm (ft-in) 879 (28-) B Maximum digging reach (on ground) mm (ft-in) 866 (28-5) C Maximum digging depth mm (ft-in) 65 (9-) D Maximum digging height mm (ft-in) 9 (3-) E Maximum dumping height mm (ft-in) 72 (23-) F Maximum vertical wall cut depth mm (ft-in) 5 (7-) G Minimum swing radius mm (ft-in) 2 (7-) Bucket rotation 82 Maximum dipper tearout (ISO 56) kgf (lbf) 597 (36) Maximum bucket tearout (ISO 56) kgf (lbf) 9375 (2667) C F Metres 9 8 7 6 5 3 2 Metres
WORKING RANGE T.A.B. Boom length: 5.m (6ft 5in) Dipper length: 2.m (6ft in) A Maximum digging reach mm (ft-in) 836 (27-5) A B Maximum digging reach (on ground) mm (ft-in) 8 (26-8) C Maximum digging depth mm (ft-in) 535 (7-6) D Maximum digging height mm (ft-in) 935 (3-8) E Maximum dumping height mm (ft-in) 695 (3-7) B G F Maximum vertical wall cut depth mm (ft-in) 9 (6-) G Minimum swing radius mm (ft-in) 25 (6-9) Bucket rotation 82 Maximum Dipper tearout (ISO 65) kgf (lbf) 755 (6569) 9 Maximum Bucket tearout (ISO 65) kgf (lbf) 9375 (2667) 8 Dipper length: 2.5m (8ft 2in) A Maximum digging reach mm (ft-in) 875 (28-8) B Maximum digging reach (on ground) mm (ft-in) 8525 (28-) 7 6 C Maximum digging depth mm (ft-in) 5755 (8-) D Maximum digging height mm (ft-in) 967 (3-8) D 5 E Maximum dumping height mm (ft-in) 725 (23-9) F Maximum vertical wall cut depth mm (ft-in) 53 (7-6) G Minimum swing radius mm (ft-in) 25 (6-9) E 3 Bucket rotation 82 Maximum Dipper tearout (ISO 65) kgf (lbf) 668 (72) 2 Maximum Bucket tearout (ISO 65) kgf (lbf) 9375 (2667) Dipper length: 3.m (9ft in) A Maximum digging reach mm (ft-in) 9235 (3-3) B Maximum digging reach (on ground) mm (ft-in) 9 (29-6) C Maximum digging depth mm (ft-in) 626 (-6) Metres D Maximum digging height mm (ft-in) 7 (33-) E Maximum dumping height mm (ft-in) 762 (25-) F Maximum vertical wall cut depth mm (ft-in) 577 (8-) C F G Minimum swing radius mm (ft-in) 2 (7-) Bucket rotation 82 Maximum Dipper tearout (ISO 65) kgf (lbf) 597 (36) Maximum Bucket tearout (ISO 65) kgf (lbf) 9375 (2667) 9 8 7 6 5 3 2 Metres
LIFT CAPACITIES Dipper Length: 2.m,.7m Monoboom, Trackshoes: 7mm, No bucket. MONO 7.5m (2.7ft) 392* 392* 39* 39* 36 6.m (9.8ft) 329* 329* 295* 295* 52.5m (.9ft) 39* 39* 36* 36* 37* 225 27* 22 668 3.m (9.ft) 67* 67* 8* 3 328 22 266* 88 66.5m (.ft) 88 36 38 2 265 76 6768 m 6* 5 7 3 3 23 272 79 659.5m (.ft) 55* 55* 82* 56 67 297 39 23 37 2 638 3.m ( 9.ft) 685* 559 65* 35 396* 267 986.5m (.9ft) LIFT CAPACITIES Dipper Length: 2.5m,.7m Monoboom, Trackshoes: 7mm, No bucket. MONO 7.5m (2.7ft) 297* 297* 389 6.m (9.8ft) 288* 288* 238* 238* 553.5m (.9ft) 33* 33* 38* 229 22* 2 678 3.m (9.ft) 53* 53* 387* 35 33 222 28 72 6982.5m (.ft) 753* 57 78* 39 38 2 229* 62 737 m 683* 5 72 3 39 22 25 6 6969.5m (.ft) 59* 59* 835* 5 6 295 36 99 277 82 65 3.m ( 9.ft) 925* 925* 73* 55 69 299 353 23 58.5m (.9ft) LIFT CAPACITIES Dipper Length: 3.m,.7m Monoboom, Trackshoes: 7mm, No bucket. MONO 7.5m (2.7ft) 285* 285* 258* 258* 65 6.m (9.8ft) 2* 2* 25* 233 27* 27* 69.5m (.9ft) 269* 269* 273* 232 2* 77 6978 3.m (9.ft) 2* 2* 3* 3* 3* 223 23* 5 77.5m (.ft) 69* 588 * 322 38 2 226 8 22* 5 7593 m 752* 52 7 3 37 2 22 6 735.5m (.ft) 57* 57* 83* 53 59 289 3 9 25 59 695 3.m ( 9.ft) 786* 786* 775* 536 59 29 3 97 3 9 66.5m (.9ft) 589* 559 367* 36 36 33 535 Lift capacity front and rear. Lift capacity full circle. Notes:. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards. 2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
LIFT CAPACITIES Dipper Length: 2.m,.7m Monoboom, Trackshoes: 7mm, No bucket. MONO + DOER 7.5m (2.7ft) 392* 392* 39* 39* 36 6.m (9.8ft) 329* 329* 295* 295* 52.5m (.9ft) 39* 39* 36* 36* 37* 237 27* 232 668 3.m (9.ft) 67* 67* 8* 357 35* 232 266* 99 66.5m (.ft) 52* 33 38 223 28* 86 6768 m 6* 575 58 39 3 26 299 9 659.5m (.ft) 55* 55* 82* 577 53 35 3 25 337 2 638 3.m ( 9.ft) 685* 59 65* 322 396* 283 986.5m (.9ft) LIFT CAPACITIES Dipper Length: 2.5m,.7m Monoboom, Trackshoes: 7mm, No bucket. MONO + DOER 7.5m (2.7ft) 297* 297* 389 6.m (9.8ft) 288* 288* 238* 238* 553.5m (.9ft) 33* 33* 38* 2 22* 2 678 3.m (9.ft) 53* 53* 387* 362 333* 23 28* 83 6982.5m (.ft) 753* 65 78* 337 39 223 229* 72 737 m 683* 575 58 39 3 25 253* 7 6969.5m (.ft) 59* 59* 835* 572 5 32 336 2 3* 93 65 3.m ( 9.ft) 925* 925* 73* 582 98* 36 378* 2 58.5m (.9ft) LIFT CAPACITIES Dipper Length: 3.m,.7m Monoboom, Trackshoes: 7mm, No bucket. MONO + DOER 7.5m (2.7ft) 285* 285* 258* 258* 65 6.m (9.8ft) 2* 2* 25* 25 27* 27* 69.5m (.9ft) 269* 269* 273* 25 2* 87 6978 3.m (9.ft) 2* 2* 3* 3* 3* 235 23* 6 77.5m (.ft) 69* 69 * 3 38* 223 28 58 22* 5 7593 m 752* 573 57 37 337 22 23* 56 735.5m (.ft) 57* 57* 83* 56 55 37 33 26 27 69 695 3.m ( 9.ft) 786* 786* 775* 567 56 37 33 29 33 226 66.5m (.9ft) 589* 589* 367* 323 36* 32 535 Lift capacity front and rear. Lift capacity full circle. Notes:. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards. 2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
LIFT CAPACITIES Dipper Length: 2.m, 5.m T.A.B., Trackshoes: 7mm, No bucket. T.A.B. 7.5m (2.7ft) 366* 366* 3857 6.m (9.8ft) 37* 37* 36* 25 5563.5m (.9ft) 3* 3* 335* 335* 35* 26 276* 83 656 3.m (9.ft) 3* 32 37 26 2 57 78.5m (.ft) 6 29 33 93 23 7 763 m 5 272 293 8 237 9 6995.5m (.ft) 737* 53 2 269 292 83 265 68 678 3.m ( 9.ft) * 28 38* 22 533.5m (.9ft) LIFT CAPACITIES Dipper Length: 2.5m, 5.m T.A.B., Trackshoes: 7mm, No bucket. T.A.B. 7.5m (2.7ft) 39* 39* 33* 33* 5 6.m (9.8ft) 276* 276* 279* 22 25* 25 653.5m (.9ft) 37* 37* 283* 22 22* 66 6929 3.m (9.ft) 376* 328 3* 29 28* 3 7.5m (.ft) 55* 29 3 9 26 36 23 35 758 m 6 273 293 83 27 36 7389.5m (.ft) 79* 9 39 266 288 79 2 5 692 3.m ( 9.ft) 67* 5 6 273 299 89 299 89 67.5m (.9ft) LIFT CAPACITIES Dipper Length: 3.m, 5.m T.A.B., Trackshoes: 7mm, No bucket. T.A.B. 7.5m (2.7ft) 256* 256* 26* 26* 5298 6.m (9.8ft) 237* 237* 28* 23 223* 8 6637.5m (.9ft) 27* 27* 255* 225 27* 6 73 3.m (9.ft) 3* 337 286* 22 222 2 22 27 7885.5m (.ft) 23* 299 35 95 25 35 92 2 823 m 5 27 29 8 29 3 95 2 7873.5m (.ft) 67* 8 33 26 283 7 22 3 79 3.m ( 9.ft) 7* 92 35 263 286 77 255 59 6596.5m (.9ft) Lift capacity front and rear. Lift capacity full circle. Notes:. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards. 2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
LIFT CAPACITIES Dipper Length: 2.m, 5.m T.A.B., Trackshoes: 7mm, No bucket. T.A.B. + DOER 7.5m (2.7ft) 366* 366* 3857 6.m (9.8ft) 37* 37* 36* 259 5563.5m (.9ft) 3* 3* 335* 335* 35* 228 276* 9 656 3.m (9.ft) 3* 338 327* 28 266 67 78.5m (.ft) 75* 37 333 25 256 56 763 m 9 29 32 96 262 59 6995.5m (.ft) 737* 53 88 287 323 95 293 79 678 3.m ( 9.ft) * 298 38* 239 533.5m (.9ft) LIFT CAPACITIES Dipper Length: 2.5m, 5.m T.A.B., Trackshoes: 7mm, No bucket. T.A.B. + DOER 7.5m (2.7ft) 39* 39* 33* 33* 5 6.m (9.8ft) 276* 276* 279* 232 25* 227 653.5m (.9ft) 37* 37* 283* 233 22* 76 6929 3.m (9.ft) 376* 36 3* 22 28* 53 7.5m (.ft) 55* 32 335 26 239 5 223* 758 m 92 29 323 95 238* 6 7389.5m (.ft) 79* 525 85 28 39 92 266 6 692 3.m ( 9.ft) 67* 52 65* 29 39* 2 38* 2 67.5m (.9ft) LIFT CAPACITIES Dipper Length: 3.m, 5.m T.A.B., Trackshoes: 7mm, No bucket. T.A.B. + DOER 7.5m (2.7ft) 256* 256* 26* 26* 5298 6.m (9.8ft) 237* 237* 28* 22 223* 95 6637.5m (.9ft) 27* 27* 255* 238 27* 56 73 3.m (9.ft) 3* 3* 286* 22 25 5 22* 36 7885.5m (.ft) 23* 36 325* 27 238 5 27* 28 823 m 86* 289 32 93 232 39 26 29 7873.5m (.ft) 67* 5 79 278 3 86 235 79 3.m ( 9.ft) 7* 523 8* 28 37 89 282 7 6596.5m (.9ft) Lift capacity front and rear. Lift capacity full circle. Notes:. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards. 2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
A GLOBAL COMMITMENT TO QUALITY CB s total commitment to its products and customers has helped it grow from a one-man business into Britain s largest privately owned manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment. By making constant and massive investments in the latest production technology, the CB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, CB machines have become renowned all over the world for performance, value and reliability. And with a global sales and service network of more than 65 dealers and agents, we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, CB has become one of the world s most impressive success stories. CB Sales Limited, Rocester, Staffordshire ST 5P. Tel: 889 5932. Fax: 889 59588. Web: http://www.jcb.com CB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The CB logo is a registered trademark of C Bamford Excavators Ltd. 9999/5397 3/ Issue 2