Seth Setzer Submit Samples to: Phone: 828-327-7000 Ext. 4449 Manufacturing Solutions Center ssetzer@manufacturingsolutionscenter.org 301 Conover Station SE Conover NC 28613 Cody Whitener Structural Testing and 3D Printing/CAD Design Intake Log Phone: 828-327-7000 Ext. 4490 cwhitener@manufacturingsolutionscenter.org Date: Company Name: Contact Name for Testing: Testing Contact Phone #: Email: Email: Contact Name for Billing: Email: Billing Contact Phone # : Email: Billing Address for Testing: Billing Contact Email: Test Results will ONLY be sent to emails listed here PO # (if applicable) **Please note: The bill will come from cvcc (Catawba Valley Community College) along with a copy of this Test Package Request Form. Please make checks payable to "CVCC" STRUCTURAL TESTING Sample ID: 3D PRINTING/CAD DESIGN Type of Sample: 3D Printing: CAD Design: Test(s) to perform: (BIFMA Standard tests on back): Dropping off: Reverse Engineering: Native File: Modifications (if any): Material: ABS Plastic Specifications of test (if any): Quantity: Specifications: Nylon Filament Modified 11/21/17 Page 1 of 10
Test # Test Name ANSI / BIFMA 5.1-2017 _ General Purpose Office Chairs Testing Price List Type of Test / Actuator Orientation 5 Back Strength - Type 1 Static / Horizontal 6 Back Strength - Type 2 & 3 Static / Horizontal 7 Drop Test - Dynamic Static / Vertical 8 Swivel Test - Cyclic Cyclic / Horizontal / Rotational 9 Tilt Mechanism Test - Cyclic Cyclic / Horizontal 10 Seating Impact - Cyclic & Load Ease Cyclic / Vertical 11 Stability Tests Static / Horizontal - Front & Rear 12 Arm Strength Test Static / Vertical 13 Arm Strength Test Static / Horizontal 14 Backrest Durability - Cyclic - Type 1 Cyclic / Horizontal 15 Backrest Durability - Cyclic - Type 2 & 3 Cyclic / Horizontal 16 Caster / chair Base Durability - Cyclic Cyclic / Horizontal 17 Leg Strength Static / Horizontal - Front & Side 18 Footrest Static Load Static / Vertical 19 Footrest Durability Cyclic / Vertical 20 Arm Durability Cyclic / Vertical 21 Out Stop/Manual Adjustable Seat Depth Cyclic / Horizontal 22 Tablet Arm Load Static / Vertical 23 Tablet Arm Load Ease Cyclic / Vertical 24 Structural Durability Cyclic FNAE 80-214 Recliner Cycle Test Cyclic / Horizontal RWST Real World Sit Test Cyclic / special fixture ANSI / BIFMA 5.4-2012 _ Lounge & Public Seating Testing Price List 5 Back Strength - Horizontal Static / Horizontal / Single 6 Back Strength - Vertical Static / Vertical / Single 7 Back Durability - Horizontal Cyclic / Horizontal / Single Modified 11/21/17 Page 2 of 10
8 Back Durability - Vertical Cyclic / Vertical 9 Arm Strength Static / Horizontal 10 Arm Strength Static / Vertical 11 Arm Durability Cyclic / Horizontal 12 Arm Durability Cyclic / Vertical / Multi Seat 13 Arm Durability Cyclic / Vertical / Single Seat 14 Seating Durability Cyclic / Vertical 15 Drop Test Static / Drop - Functional & Proof 16 Leg Strength Static / Horizontal - Front & Side 17 Unit Drop Test Static / Unit Drop 18 Caster Durability Cyclic / Horizontal 29 Swivel Cycling Cyclic / Horizontal - Rotational 20 Tilt Mechanism Cyclic / Horizontal 21 Stability Static / Horizontal - Front & Rear 22 Tablet Arm Load Ease Cyclic / Vertical 23 Tablet Arm Load Static / Vertical FNAE 80-214 Recliner Cycle Test Cyclic / Horizontal RWST Real World Sit Test Cyclic / special fixture 4 Stability Tests 4.2 Stability w/ Extendible Elements Open 4.3 Stability Under Vertical Load 4.4 Horizontal Stability Test for Desks/Tables w/ Casters 4.5 Stability_Keyboard / Laptop Table_W/ & W/out Casters 4.6 Force Stability Test_Tall Desk/Table Products 5 Unit Strength Tests 5.2 Concentrated Functional Load Test 5.3 Distributed Functional Load Test 5.4 Concentrated Proof Load Test ANSI / BIFMA 5.5-2014 _ Desks & Tables Testing Price List Modified 11/21/17 Page 3 of 10
5.5 Distributed Proof Load Test 5.6 Transaction Surface Torsion Load Test 5.7 Extendible Element Static Load Test 5.8 Benching Systems_Distributed Functional Load & Stability Test 5.9 Benching Systems_Distributed Proof Load Test 6 Top Load Ease Cycle Test 7 Desk/Table Unit Drop Test 8 Leg Strength Test 9 Separation Test_Tall Desk/Table Products 10 Extendible Element Cycle Test 10.2 Cycle Test_Extendible Elements Deeper than Wide 10.3 Cycle Test_Extendible Elements Wider than Deep 10.4 Cycle Test_Low height drawers 11 Extendible Element Retention Impact & Durability Test 12 Extendible Element Rebound Test 13 Interlock Strength Test 14 Lock Tests 14.2 Force Test_Extendible Element Locks 14.3 Force Test_Door Locks 14.4 Locking Mechanism Cycle Test 15 Work Surface Vertical Adjustment Tests 16 Keyboard Support and Input Device Support Adjustment Tests 17 Door Tests 17.2 Strength Test_Vertically Hinged, Bi-fold, & Vertically Receding Doors 17.3 Hinge Override Test_Vertically Hinged Doors 17.4 Vertically Receding Doors Strength Test 17.5 Horizontal Receding Doors Strength Test 17.6 Wear & Fatigue Test_Hinged, Horizontal Sliding, & Tambour Doors 17.7 Wear & Fatigue Test_Vertical Receding Doors 17.8 Wear & Fatigue Test_Horizontal Receding Doors 17.9 Vertical & Horizontal Receding Door Out Stop Test_Cyclic Impact & Durability Modified 11/21/17 Page 4 of 10
17.1 Slam Closed Test_Vertically Hinged & Vertically Receding Doors 17.11 Drop Cycle Test_Horizontally Hinged & Horizontally Receding Doors 17.12 Slam Test_Doors that Free Fall Open or Closed 17.13 Slam Open & Closed Test_Doors That Do Not Free Fall 17.14 Door Latch Test 18 Durability Test_Desks & Tables w/ Casters 19 Pull Force Test 20 Tilting Top Table_Cycle Test 21 Tilting Top Table_Latch Strength Test 22 Monitor Arm Strength Test 23 Monitor Arm Cyclic Test 24 Monitor Arm Dislodgement Test 5 Stability Tests 5.1 Force Stablity 5.2 Impact Stability 5.3 Force Stability; Freestanding Screens 6 Mechanical Strength 7 Panel Glide Assembly Strength 8 Panel Component Static Load Tests 8.1 Primary Surface Concentrated Functional Load 8.2 Horizontal Surface Distributed Functional Load 8.3 Primary Surface Concentrated Proof Load 8.4 Horizontal Surface Distributed Proof Load 8.5 Transaction Surface Torsional Load 8.6 Functional Load; Panel Mounted Storage Units; Static 8.7 Proof Load; Panel Mounted Storage Units; Static 9 Lock Tests 9.1 Test; Extendible Element Locks 9.2 Force Test; Door Locks 10 Panel Mounted Component Cyclic Durability Tests 10.1 Top Load Ease Cycle; Primary Surfaces 10.2 Cycle; Extendible Elements Deeper then Wide ANSI / BIFMA 5.6-2010 _ Panel Systems Testing Price List Modified 11/21/17 Page 5 of 10
10.3 Cycle; Extendible Elements Wider than Deep 10.4 Cycle; Center / Pencil Drawers 10.5 Extendible Element Retention Impact & Durability 10.6 Rebound 10.7 Locking Mechanism; Cyclic 10.8 Keyboaard Support & Input Device Support Adjustment 10.9 Work Surface Vertical Adjustment 11 Door Tests 11.2 Door Strength; Vertically Hinged Doors, Bi-fold Doors, & Vert. Receding 11.3 Hinge Override; Vertically Hinged Doors 11.4 Vertical Receding Door Strength 11.5 Horizontal Receding Door Strength 11.6 Wear & Fatigue; Hinged, Horizontal Sliding, & Tambour Doors 11.7 Wear & Fatigue; Vertical Receding Door 11.8 Wear & Fatigue; Horizontal Receding Door 11.9 Vertical or Horizontal Receding Door Out Stop; Cyclic Impact, & Durability 11.10 Slam Closed; Vertical Hinged Doors 11.11 Drop; Horizontally Hinged Doors; Cyclic 11.12 Slam; Doors which Free Fall Open or Closed 11.13 Slam Open / Closed; Doors that Do Not Free Fall 11.14 Door Latch 12 Disengagement Tests for Panel Mounted Components 12.1 Upward Force Static Disengagment; Panel Mounted Components 12.2 Upward Force Impact Disengagment; Panel Mounted Components 13 Pull Force Test 4 Unit Strength Tests - Concentrated, Distributed & Extendable Load 5 Leg/ Glide Assembly Strength Test 6 Racking Resistance 7 Vertical Load Durability Test 7.1 Top Load Ease Cycle Test 7.2 Drop Test - Dynamic for Units w/ Seat Surfaces ANSI / BIFMA 5.9-2012 _ Storage Unit Testing Price List Modified 11/21/17 Page 6 of 10
7.3 Durability Test for for Units w/ Seat Surfaces - Cyclic Impact 8 Separation & Disengagement Test 8.1 Separation Test-Tall Storage Units w/ Vertically or Stacked Elements 8.2 Upward Impact Force Disengagement Test 8.3 Upward Force static Disengagement Test 9 Stability Tests 9.2 Horizontal Force Stability Test for Tall Storage Units 9.3 Stability Test for Type 1 units w/ Extendable Elements 9.4 Stability Test for Type 1 Storage Units with Multiple Extendible Elements 9.5 Stability Test for Type 2 Storage Units with Extendible Elements 9.6 Vertical Force Stability Test for Storage Units 9.7 Stability Test for Pedestals / Storage Units w/ Seat Surfaces 10 Storage Unit Drop Test 11 Durability Test for Desks and Tables w/ Casters 12 Rebound Test 13 Extendible Element Retention Impact and Durability Test 14 Lock Tests 14.2 Force Test for Extendible Element Locks 14.3 Force Test for Door Locks 14.4 Locking Mechanism Cycle Test 15 Extendible Element Cycle Test 15.2 Cycle Test for Extendible Elements Deeper than Wide 15.3 Cycle Test for Extendible Elements Wider than Deep 15.4 Horizontal Cycle Test for Television / Video Display Extendible Elements 15.5 Cycle Test For Low Height Drawers 16 Interlock Strength Test 17 Door Tests 17.2 Strength Test for Vertically Hinged Doors, Bi-fold Doors, & Vertically Receding 17.3 Hinge Override Test for Vertically Hinged Doors 17.4 Vertically Receding Doors Strength Test 17.5 Horizontal Receding Doors Strength Test 17.6 Wear / Fatigue Test for Hinged, Horizontal Sliding, and Tambour Doors 17.7 Wear / Fatigue Test for Vertical Receding Doors Modified 11/21/17 Page 7 of 10
17.8 Wear / Fatigue Test for Horizontal Receding Doors 17.9 Vertical and Horizontal Receding Door Out Stop Test Cyclic Impact and Dura 17.1 Slam Closed Test for Vertically Hinged and Vertically Receding Doors 17.11 Drop Cycle Test for Horizontally Hinged and Horizontally Receding Doors 17.12 Slam Test for Doors that Free Fall Open or Closed 17.13 Slam Open and Closed Test for Doors That Do Not Free Fall 17.14 Door Latch Test 18 Clothes Rail Static Loading Test 19 Swivel cycle test for Television / Video Display Terminal Surfaces 20 Pull Force Test ANSI / BIFMA 5.11-2015 General Purpose Large Occupant Office Chair Testing Price List 6 Back Strength - Type 1 Static/Horizontal 7 Back Strength - Type 2 & 3 Static/horizontal 8 Drop Test - Dynamic Static / Vertical 9 Swivel Test - Cyclic Cyclic / Horizontal / Rotational 10 Tilt Mechanism Test - Cyclic Cyclic / Horizontal 11 Seating Impact - Cyclic & Load Ease Cyclic / Vertical 12 Stability Tests Static / Horizontal - Front & Rear 13 Arm Strength Test Static / Vertical 14 Arm Strength Test Static / Horizontal 15 Backrest Durability - Cyclic - Type 1 Cyclic / Horizontal 16 Backrest Durability - Cyclic - Type 2 & 3 Cyclic / Horizontal 17 Caster / chair Base Durability - Cyclic Cyclic / Horizontal 18 Leg Strength Static / Horizontal - Front & Side 19 Arm Durability Cyclic / Vertical 20 Out Stop/Manual Adjustable Seat Depth Cyclic / Horizontal 21 Tablet Arm Load Static / Vertical 22 Tablet Arm Load Ease Cyclic / Vertical 23 Sturctural Durability Test Cyclic / Horizontal FNAE 80-214 Recliner Cycle Test Cyclic / Horizontal Modified 11/21/17 Page 8 of 10
RWST Real World Sit Test Cyclic / special fixture ANSI / BIFMA 6.5 Small Office & Home Office Furniture Testing Price List 4 Stability Tests 4.2 Stability Under Vertical Load Test 4.3 Stability Test for Units with Extendible Load-Bearing Elements 4.4 Stability Test for Freestanding Pedestals 4.5 Horizontal Stability Test for Desk/Tables with Casters 4.6 Horizontal Force Stability/Disengagement Test for Tall Units 4.7 Vertical Force Stability For Bookcases and Other Units Without Extendible Elements 4.8 Horizontal Force Stability for Bookcases and Other Units Without Extendible Elements 5 Static Load Tests 5.2 Distributed Functional Load Test for Individual Surfaces 5.3 Concentrated Functional Load Test For Primary Surfaces 5.4 Distributed Proof Load Test for Individual Surfaces 5.5 Concentrated Proof Load Test for Individual Surfaces 5.6 Unit Strength Test - Static Load 5.7 Extendible Element Proof Load Test 6 Top Load Ease Test - Cyclic 7 Leg Strength Test - Static 8 Horizontal Racking Resistance Test 9 Interlock Test - Static 10 Drop Test 11 Lock Tests 11.2 Force Test for Extendible Element Locks 11.3 Force Test for Door Locks 12 Extendible Element/Equipment Surface Test - Cyclic 12.2 Cycle Test for Extendible Elements/Equipment Surfaces Deeper Than Wide 12.3 Cycle Test for Extendible Elements/Equipment Surfaces Wider Than Deep 12.4 Cycle Test for Center/Pencil Drawers 13 Extendible Element/Equipment Surface Retention Tests 14 Rebound Test 15 Keyboard Support and Input Device Support Adjustment Tests Modified 11/21/17 Page 9 of 10
16 Hinged Door Tests 16.1 Strength Test for Vertically Hinged Doors 16.2 Wear / Fatigue Tests for All Hinged Doors 16.3 Slam Open/Closed Test for Vertically Hinged Doors 16.4 Drop Cycle Test for Horizontally Hinged and Horizontally Receding Doors 17 Receding Door Tests - Cyclic 17.2 Test for Horizontal Receding Doors 17.3 Test for Vertical Receding Doors 18 Sliding and Tambour Door Tests - Cyclic 18.2 Wear / Fatigue Test 18.3 Slam Open and Closed Test for Doors Which Do Not Free Fall 19 Durability Test for Products with Casters - Cyclic 20 Pull Force Test Labor Cost (per hr): $75 per hour Machine Run Cost (per hr): $2 per hour Cost: Cost: Total: Modified 11/21/17 Page 10 of 10