SECURITY SEARCH EQUIPMENT UNDER VEHICLE SEARCH MIRROR A robust wheeled trolley under vehicle mirror, specifically designed and developed with security personnel in mind, for searching the underside of vehicles. A large unbreakable polycarbonate mirror provides a wide angle image, illuminated by a powerful 12 volt 8 watt fluorescent tube. The T handle, which assists in tilting the mirror, is telescopic and folds away when not in use. Power is supplied by rechargeable batteries, and a charging system for 110v or 240V is included. A glass convex mirror is available to special order. Under Vehicle Search Mirror With UK/Euro Charger Part No: SE001800 NSN:5120-99-772-8123 Under Vehicle Search Mirror With USA Charger Part No: SE002600 NSN:5120-99-770-6852 Under Vehicle Search Mirror Glass convex mirror only Part No: SE011808 POCKET SEARCH MIRROR Part No: SE000600 (NSN):5120-99-148-3692 An illuminated security mirror to assist in vehicle, boat or aircraft search. The Safe-C incorporates a telescopic handle measuring just 20cm when shut, yet extends to 80cm when in use. An automatic on/off switch provides illumination to the mirror offering excellent vision day or night. The Safe-C mirror is compact enough to be carried in your pocket. (Accepts 2 x AAA batteries.) 1
TELESCOPIC SEARCH ARM Part No: SE000100 (NSN):5120-99-723-8872 A purpose made telescopic handle which will accept a variety of mirrors. When closed, the four section handle measures just 480mm, and will extend to a maximum length of 1.6m. A revolutionary twist and lock mechanism enables it to be locked at any length. Manufactured from anodised aluminium, the Telescopic Search Arm is the most rigid telescopic arm available. ILLUMINATED TELESCOPIC SEARCH ARM Part No: SE000200 (NSN):5120-99-484-3306 As the Telescopic Search Arm, but fitted with a D cell torch, useful during searches carried out in low light levels. RIGID SEARCH ARM Part No: SE000300 (NSN):5120-99-236-1592 A D cell torch fitted to a rigid steel arm. Overall length 0.5 m. THE FOLLOWING MIRRORS ARE SUITABLE FOR USE WITH THE TELESCOPIC & RIGID SEARCH ARMS: 38MM DIAMETER PLANO MIRROR PART NO. SE001700 NSN. 5120-99-184-8446 65MM DIAMETER PLANO MIRROR PART NO. SE001400 NSN. 5120-99-151-2535 65MM DIAMETER PLANO MIRROR WITH PROTECTIVE RING AROUND MIRROR PART NO. SE001500 NSN. 5120-99-275-5024 65MM X 115MM RECTANGULAR PLANO MIRROR PART NO. SE000800 NSN. 5120-99-961-2867 100MM DIAMETER PLANO MIRROR PART NO. SE001300 NSN. 5120-99-749-2176 140MM DIAMETER PLANO MIRROR PART NO. SE001100 NSN. 5120-99-593-8796 140MM DIAMETER WIDE ANGLE MIRROR PART NO. SE001000 NSN. 5120-99-324-0036 140MM DIAMETER PLASTIC MIRROR PART NO. SE001200 NSN. 5120-99-833-0991 140MM DIAMETER WIDE ANGLE MIRROR WITH PROTECTIVE RING AROUND MIRROR PART NO. SE000400 NSN. 5120-99-133-7087 2
NIC INSTRUMENTS L I G H T W E I G H T SEARCH MIRROR P A R T N O : S E 0 0 3 3 0 0 The NIC lightweight search mirror has a polycarbonate convex mirror ideal for searching under vehicles. The mirror is illuminated for carrying out searches in low light conditions. The search mirror has an integral rechargeable battery, and is designed for single handed use. NIC LIGHTWEIGHT SEARCH MIRROR PART NO: SE003300 NSN: 5120-99-749-0143 Suitable for single handed use. Extendable shaft for searching out of reach areas. Polycarbonate convex mirror. Mirror size 205mm x150mm. Mirror on an adjustable pivot for varying viewing angle. Light weight aluminium shaft construction. State of the art, high intensity LED illumination. Integral battery, no belt mounted battery packs. Rechargeable battery. Recharging system included, suitable for 110-240V supply. Adjustable cuff for comfortable use. PARTS & ACCESSORIES: Lightweight Search Mirror SE003300 Spare Mirror SE013319 Spare Battery SE013320 Battery Charger EOD000111 3
THE ENDOSCOPE SEARCH KITS Two search kits designed to aid the search of cars, buildings and vessels. Both portable, and come packed in foam lined fitted cases and include a fixed side viewing endoscope - overall diameter 12mm, working length 300mm illuminated by a powerful 10 W halogen lamp. Both come complete with a 12V 2.3 Ah rechargeable power pack and battery charger. Both kits arrive ready to use with spare lamps. ENDOSCOPE KIT part no:se009900 (NSN): 6665-99-595-5282 This kit contains: 1 Rigid endoscope 12mm diameter 300mm long 12V. 1 Power pack for endoscope. 1 Battery charger for power pack. 1 Belt and pouch for power pack. 1 Spare bulb 12V 10W for endoscope. 1 Foam lined fitted case. ENDOSCOPE SEARCH KIT part no:se009800 (NSN): 6665-99-317-5218 This kit contains: 1 Rigid endoscope 12mm diameter 300mm long 12V. 1 Power pack for endoscope. 1 Battery charger for power pack. 1 Belt and pouch for power pack. 1 TIM telescopic inspection arm. 1 TOM rigid torch arm. 1 SM-R-P 65 x 115 plano screw fitting mirror. 2 SM-140-C 140mm diameter wide angle screw fitting mirror. 1 SM-65-P 65mm diameter plano screw fitting mirror. 1 Spare bulb 12V 10W for endoscope. 1 Foam lined fitted case. 4
COMPREHENSIVE SEARCH KIT A comprehensive yet portable kit, to aid in the search of vehicles and buildings. The kit contents are supplied in a fitted foam lined case. Components such as a fully rechargeable 12W 12V twin tube fluorescent hand lamp, and rigid 12mm diameter lamp lit endoscope are included. COMPREHENSIVE SEARCH KIT, part no: SE009000 (NSN): 6665-99-395-8306 This kit contains: 2 Battery handle-medium (accepts 2 x C cells.) 1 Illuminated magnifier head with X8 lens. 1 MES lamp holder and bulb, converts battery handle to torch. 1 Rigid MES bulb light probe 380mm long. 1 Stayput flexible MES bulb light probe. 1 Cold light MES bulb light probe 380mm long. 1 7mm diameter curved light probe 250mm long. 1 3mm diameter light probe 50mm long. 1 3mm diameter light probe 150mm long. 1 3mm diameter light probe 200mm long. 1 5mm bore viewing sleeve 150mm long - to fit 3mm light probe 150mm long. 1 10mm bore viewing sleeve 50mm long - to fit 3mm light probe 50mm long. 1 10mm bore viewing sleeve 200mm long - to fit 3mm light probe 200mm long. 1 Angled extension for probes. 1 Straight extension for probes 380mm long. 1 65mm Round articulated mirror to fit MES probes. 1 38mm Round articulated mirror to fit MES probes. 1 Recovery magnet. 1 Accessory holder-large, adapts magnet to fit MES probes. 1 TIM telescopic inspection arm. 1 TOM rigid torch arm. 2 SM-R-P 65 x 115 rectangular plano screw fitting mirror to fit TIM & TOM. 3 SM-140-C 140mm diameter wide angle screw fitting mirror to fit TIM & TOM. 2 SM-65-P 65mm diameter plano screw fitting mirror to fit TIM & TOM. 1 12W 12V Hand lamp rechargeable 240V. 1 Rigid endoscope 12mm diameter 300mm long 12V - powered by handlamp. 2 Angled military torch. 1 Spare bulb box containing: 2 Bulb for 3mm probe (exposed filament.) 2 Bulb for MES probes. 2 Bulb for 7mm probes. 1 Bulb 12V 10W PART NO: IE000400 IE000100 IE001700 IE002100 IE002400 IE002600 IE005400 IE004100 IE004300 IE004400 IE003900 IE004600 IE004900 IE002000 IE002300 IE000800 IE000900 IE001800 IE001600 SE000100 SE000300 SE000800 SE001000 SE001400 SE002100 SE002203 SE002500 SE010501 IE005000 IE005800 IE005900 RS1576980 SE019001 5
MINIATURE INSPECTION KIT A range of miniature illuminated search probes, ideal for the inspection of suspect packages and devices. The kit allows for thorough examinations to be carried out through small holes and apertures. The kit comes housed in a foam lined carry case and with a kit of spare lamps. MINIATURE INSPECTION KIT part no IE008800 NATO stock number (NSN): 6665-99-671-5174 1 Illuminated magnifier head with x8 lens 2 Medium battery handle (accepts 2 x C cells) 1 65mm round articulated mirror to fit MES probes 1 38mm round articulated mirror to fit MES probes 1 Small elliptical mirror to fit 7mm probes 2 26mm round mirror 1 19mm round mirror 2 Large accessory holder 1 Recovery magnet 1 380mm long straight extension for probes 1 Stayput flexible MES bulb light probe 1 Fully flexible MES bulb light probe 1 380mm long cold light MES bulb light probe 1 3mm dia, 50mm long light probe 1 3mm dia, 150mm long light probe 1 3mm dia, 200mm long light probe 1 10mm bore viewing sleeve, 50mm long (to fit IE004100) 1 10mm bore viewing sleeve, 150mm long (to fit IE004300) 1 10mm bore viewing sleeve, 200mm long (to fit IE004400) 1 7mm dia, 75mm long curved light probe 1 7mm dia, 150mm long curved light probe 1 7mm dia, 200mm long curved light probe 2 Small accessory holder 1 Spare bulb box containing: 2 bulb for 3mm probes (shrouded filament) 2 bulb for MES probes 2 bulb for 7mm probes 1 Fitted case PART NUMBER: IE000100 IE000400 IE000800 IE000900 IE001200 IE001400 IE001500 IE001600 IE001800 IE002300 IE002400 IE002500 IE002600 IE004100 IE004300 IE004400 IE004600 IE004800 IE004900 IE005200 IE005300 IE005400 IE006000 SE010501 IE005100 IE005800 IE005900 IE018801 6