PRECICION 1
CNC lathe M06 J / M08 J 2
Basic Structure M06/ M08 J 8-station turret tool post Hydraulic chuck axis Zaxis Slant 30 Sliding guide (X axis) High rigidity roller guide (Z axis) High rigidity headstock (belt drive) Machine body supporting heavy-duty cutting Tailstock (option) 2 3
Advantages of Tsugami Machines 1. Small Footprint a. J Type 1690 x 1570 mm Tsugami Machine are Smaller in Floor Space than other machines in the market. Better Space utilization of existing space. Smaller Line length. 2. Heavy Duty Construction 1. Single Piece cast Iron Base Machine wt 3300 kg ~3900 kg 2. Z axis Roller Guide- way! Roller Guide way on Z axis provides better rigidity for hard part turning and better depth of Cut.! Roller guide-way provides Line contact as compare to point contact in Ball Guide-way. 3. X axis Box Guide-way! Box guideway provides surface contact and hence maximum rigidity compared to LM guideways. This allows for better surface finish. 4
Advantages of Tsugami Machines 4. Spindle Bearing Size 100 mm Tsugami provides a large bearing size allowing for a hole through a maximum bar capacity of 65 mm on M08 J and 52 mm on M06 J. 5. Hollow chuck and hollow Cylinder Hollow chuck and hollow with bore capacity of 65 mm in M08J and 52 mm in M06 J is provided as a standard. ( This is a big bore chuck ) 6. Servo Hydraulic Turret Turret with Servo rotation and hydraulic clamping provides best possible solution. Maximum clamping rigidity with hydraulic system and minimum Index time with servo motor. 7. Spindle Motor Size Tsugami Uses special High torque motors from Fanuc with 1200 rpm base speed. M06 J 5.5/7.5 kw and M08 J 9/11 kw 5
Special Features of Tsugami Machines 1.Spindle Air purge Tsugami machines have a spindle Air purge. This is a constant flow of air between the sealing area and the bearing. This provides a positive pressure to ensure no coolant, Dust or dirt enters into the bearing area over the life of the machine. 2.Lubrication oil Collection Tray Casting base has a built in slope that makes the lubrication oil flow to one side and is drained into a lubrication oil collection tray. This prevent lubrication oil leakage onto the floor of the machine. 3.Retraction By abnormal Load Detection ( Standard ) When load level exceeds the setting level that is set based on data such as collision an alarm will occur and make the slide retract. 4.Thermal Displacement Compensation Sensor Thermal Displacement compensation to ensure better component accuracy. 6
Specification M06 J / M08 J Maximum Machining Dia Maximum Machining Length M06 J 260 mm / 51 mm barstock M08 J 280 mm / 65 mm barstock 290 mm Chuck Size 6 Inch 8 Inch Maximum Spindle Speed 4500 Rpm 4000 Rpm Spindle Size A2-6 ( JIS ) No. Of turret Stations 8 Stations Main Spindle Motor 5.5/7.5 kw 9/11 kw Rapid Travers X axis 24 M/min Z axis 27 m/ Min Power Source Require 23 kva 27kVA 7
Other Special Options! Barfeeder Option With parts catcher and parts conveyor! M06 J upto 51 mm! M08 J upto 65 mm! Gantry Option! Autoloading Gantry option! With workstocker and converyor 8
Comparison to Indian Machines Spindle power Tsugami M06J M08J 5.5/7.5 kw (1200 rpm base speed) 9/11kW (1200 rpm base speed) Guide Way X axis Box Guideway Integral LM ball Other India Made Machine 5.5 /7.5 kw ( 2000 rpm Base Speed ) Guide-way Z axis LM Guideway ( Roller ) LM Guideway ( ball ) Bar capacity 52 mm 65 mm 42 mm Spindle bearing 100 mm 70 mm Turret type Servo Hydraulic type Electro mechanical or hydraulic Turret Index time 0.4 Sec 1.2 Second Machine weight 3400~3800 kg 2500 kg Machine size 1690 mm x 1570 mm ~2300 mm 9
Comparison to Indian Machines Tsugami M06J M08J Other India Made Machine Spindle Air Purge Available ( Standard) Not Available Lubrication collection Tray Available ( Standard ) Not available Thermal Displacement compensation Retraction By Abnormal Load detection Bar feeder and parts catcher Gantry Option Available ( Standard ) Available ( Standard ) Optional Optional Not Available Not Available 10
Thank You 11